COATING/ ULTRASONIC THICKNESS GAUGE

Size: px

Start display at page:

Download "COATING/ ULTRASONIC THICKNESS GAUGE"

Derrick Wiggins
6 years ago
Views:

Ultrasonic Thickness Gage (BE850) * Data store/recall; * Sound velocity measuring * LCD backlight * Low battery indication * Auto power off Specifications: BE850 Measuring Range Sound Velocity range

1 Ultrasonic Thickness Gage (BE850) * Data store/recall; * Sound velocity measuring * LCD backlight * Low battery indication * Auto power off Specifications: BE850 Measuring Range Sound Velocity range Frequency Operation temperature Sensor operation temperature Minimum limit for tube measuring Data store/recall Sound velocity measuring LCD backlight power Low battery indication Auto power off mm(Steel) ±(1%H+0.1)mm (<100mm)0.1mm 1000~9999m/s 5MHz 0 ~45 Normal0~60 High tem0~250 (with high tem. Agent) Ф10mm probe:ф20*3mm(steel) Ф6mm probe:ф12*2mm(steel) 1.5VAAA*3 Batteries

Ultrasonic Thickness Gauge(TM-8816) Application: * Used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.

2 Ultrasonic Thickness Gauge(TM-8816) Application: * Used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. *Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials * Operating principle: ULTROSONIC * low battery indicator * Optional cable and software for RS232C TM-8816 Specification: Measuring range (metric/imperial) Sound velocity Lower limit steel pipes Calibration block RS232C interface Power Operating conditions weight mm,0.05-8inch m/s ф15x2.0mm, ф20x3.0mm determined by the transducer included 0.1mm(TM8816C 0.01mm) ±(0.5%n+0.1) with RS232C 4x1.5V AAA (UM-4)battery ( ), 90%RH 120x62x30mm 164g(not including battery)

Ultrasonic thickness gauge(tm-8812) TM-8810 * Display sound velocity at the touch of a button * Broad band receiving sensitivity means the meter can read probes of different frequencies * 4-digit, 0.

3 Ultrasonic thickness gauge(tm-8812) TM-8810 * Display sound velocity at the touch of a button * Broad band receiving sensitivity means the meter can read probes of different frequencies * 4-digit, 0.4" (10mm) high LCD readout * Automatic material calibration * Selectable metric or imperial * Measures the thickness of steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron * Optional RS232 interface & software Specifications: Range: 0.05 to 9"/1.2 to 225mm : 0.001"/0.1mm : ±(0.5% + 0.2"/0.1mm) Velocity Range: 500 to 9000 m/s Lower limit steel pipes: Ф15*2.0mm, Ф20*3.0mm determined by the transducer Characteristics: Power Supply: 4 x 1.5V "AA" batteries : 4.7 x 2.4 x 1.2" (120 x 62x 30mm) Weight: 5.8 oz (164g) Standard Individual Packing: Protective Carrying Case with contoured rubber compartments

Coating Thickness Gauge (CM-8826F, CM-8826N,CM-8826FN) * Mils/Microns switchable * Auto calibration and zero adjustment *Wear-resistant probe tip *Serial RS232 communication for downloading readings

4 Coating Thickness Gauge (CM-8826F, CM-8826N,CM-8826FN) * Mils/Microns switchable * Auto calibration and zero adjustment *Wear-resistant probe tip *Serial RS232 communication for downloading readings as they are taken to a PC or Data Collector (requires optional Serial Output Cable) CM-8826 * Extended cables available (up to 100m m) for remote measuring F Type (CM8826F)- for ferrous metals (steel and cast iron) N Type (CM8826N) - for non-ferrous metals (aluminum, copper, brass, etc.) FN Type (CM8826FN) - for all metals substrates. Measurement Range 0~50 mils/0~1025μm ±(1~3%)/±2.5μm 0.1mils,0.5μm Weight Power Supply Included Accessories Standard Individual Packing 126 x 65 x 27mm 81g 6.0V Battery (AAA*4)(not included) Carrying case, Substrate block & calibration foil set, and Instruction manual Gift Box

Coating Thickness Gauge (CM-8825F;CM-8825N;CM-8825FN) Mils/Microns switchable Auto calibration and zero adjustment Wear-resistant probe tip Serial RS232 communication for downloading readings as they

5 Coating Thickness Gauge (CM-8825F;CM-8825N;CM-8825FN) Mils/Microns switchable Auto calibration and zero adjustment Wear-resistant probe tip Serial RS232 communication for downloading readings as they are taken to a PC or Data Collector (requires optional Serial Output Cable) F Type (CM8825F)- for ferrous metals (steel and cast iron) N Type (CM8825N) - for non-ferrous metals (aluminum, copper, brass, etc.) FN Type (CM8825FN) - for all metals substrates. Measurement Range 0~50 mils/0~1025μm ±(1~3%)/±2.5μm 0.1mils,0.5μm CM-8825 Weight Power Supply Included Accessories Standard Individual Packing 126 x 65 x 27mm 81g 6.0V Battery (AAA*4)(not included) Carrying case, Substrate block & calibration foil set, and Instruction manual Gift Box

PORTABLE COATING THICKNESS GAUGE

PORTABLE COATING THICKNESS GAUGE Coating Thickness Gauge IPX-201F Handheld coating thickness gauge with F-probe for steel substrates. Clear 4 digit segment LCD display Magnetic induction measuring principle Non-magnetic coating on ferrous