CONTENTS POLYETHYLENE 4. Low-density polyethylene 4. Polyethylene compositions for the cable industry 5 POLYPROPYLENE 7
|
|
- Ella Pearson
- 6 years ago
- Views:
Transcription
1
2 CONTENTS POLYETHYLENE 4 Low-density polyethylene 4 Polyethylene compositions for the cable industry 5 POLYPROPYLENE 7 Polypropylene manufactured by LLC NNP Neftekhimiya 7 Polypropylene manufactured by LLC Tomskneftekhim 8
3 AFFILIATE COMPANIES OF SIBUR S POLYMER BUSINESS
4 LDPE POLYETHYLENE Properties Low-density polyethylene GOST , rev. 1, 2, Density, g/cm ± ± Melt Flow Index (rated value) to a tolerance of %, g/10 min MFI dispersion within the batch limit, %, max Number of inclusions, pcs, max Tensile strength at yield, MPa (kgf/cm 2 ), min Tensile strength at break, MPa, (kgf/cm 2 ), min 2 ± ± 30 ±6 ± х 10 5 (95) 98 х 10 5 (100) 113 х 10 5 (115) 137 х 10 5 (140) Elongation at break, %, min Extractives, %, max Film appearance test А, В А, В Taste and odor of aqueous extract, points, max Environmental Stress Cracking Resistance (ESCR), h, min For the production of film, technical articles, hoses, fittings and packaging materials 4
5 POLYETHYLENE Polyethylene compositions for the cable industry Properties K K K GOST , rev. 1, 2, 3 Density, g/cm not rated Melt Flow Index, g/10 min MFI dispersion within the batch limit, %, max ± 8 ± 8 ± 8 Number of inclusions, pcs, max 3 2 not rated Environmental Stress Cracking Resistance (ESCR), hrs, min Extractives, %, max Tensile strength at yield, MPa (kgf/cm 2 ), min Tensile strength at break, MPa, (kgf/cm 2 ), min 9.8 (100) 9.8 (100) 9.8 (100) 137 х 10 5 (140) 137 х 10 5 (140) 137 х 10 5 (140) Elongation at break, %, min For the application of insulation, coverings and protective coatings of wires and cables by extrusion 5 LDPE
6 LDPE
7 POLYPROPYLENE Polypropylene manufactured by LLC NNP Neftekhimiya Properties Melt Flow Index, g/10 min Volatiles, %, max Tensile strength at yield, MPa (kgf/cm 2 ), min Elongation at yield, %, not less than Isotactic stream %, min 93 BOPP film General purpose Moulded articles 7 PP
8 PP POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Homopolymer Properties PP H020 GP PP H030 GP PP H030 GP b PP H040 GP Melt Flow Index, g/10 min 1,5-2,5 2,5-3,5 2,5-3,5 3,5-5,0 General purpose Properties PP H060 GP PP H080 GP PP H120 GP PP H180 GP PP H250 GP PP H300 GP PP H400 GP Melt Flow Index, g/10 min 5,0-7,0 7, General purpose Properties PP H033 FF PP H034 FF PP H121 FF PP H230 FF PP H233 FF PP H270 FF Melt Flow Index, g/10 min 2,9-3,5 2,9-3, Film thread (raffia), carpet base, bags, big bags Fibers Fibres, nonwovens Properties PP H273 FF PP H353 FF PP H234 FF PP H274 FF PP H354 FF PP H003 EX 8 Melt Flow Index, g/10 min ,20-0,40 Fibres, nonwovens Fibers, nonwovens, agrotextile Non-pressure pipes, sheets
9 POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Homopolymer Properties PP H004 EX PP H007 EX PP H013 EX PP H013 EX b PP H018 BM Melt Flow Index, g/10 min 0,20-0,40 0,40-0,90 0,90-1,6 0,90-1,6 1,6-2,2 Non-pressure pipes, sheets Non-pressure pipes, ribbons, sheets, fittings Ribbons, sheets, fittings Ribbons, sheets, fittings, geogrid Blowing, extrusion, thermoforming Properties PP H032 TF PP H031 BF PP H035 BF Melt Flow Index, g/10 min 2,9-3,4 2,9-3,3 2,9-3,3 Thermoforming, extrusion, injection molding Biaxially-oriented metallized film, thermoforming, film thread (raffia) Properties PP H065 CF PP H085 CF PP H086 CF PP H022 CM Melt Flow Index, g/10 min 5,5-7,5 7,5-9,5 7,5-9,5 1,9-2,4 Films Metallized film Caps. Compression injection molding including сast-film Properties PP H180 IM PP H251 IM PP H351 IM PP H451 IM PP H252 IM PP H352 IM PP H452 IM 9 Melt Flow Index, g/10 min Injection molding, Injection molding, transparent packaging sturdy packaging PP
10 PP POLYPROPYLENE Polypropylene manufactured by LLC Tomskneftekhim. Stat-copolymer Properties PP R003 EX PP R007 EX PP R007 EX w PP R015 BF PP R020 BM PP R030 BM Melt Flow Index, g/10 min 0,20-0,40 0,40-0,90 1,2-1,8 1,8-2,5 2,5-3,5 Pressure Pipes class PPR80 Pressure pipes, fittings tubular film Extrusion blow molding, transparent sheets Extrusion blow molding, thermoforming Properties PP R065 CF PP R085 CF PP R100 CF PP R125 IM PP R250 IM PP R350 IM PP R450 IM PP R600 IM Melt Flow Index, g/10 min 5,0-7,5 7,5-9,5 9, Films Injection blow molding, injection molding "Injection molding, transparent packaging" 10
11
12 SIBUR Holding CJSC 16/1 Krzhizhanovskogo Str, Moscow, GSP-7, , Russia tel.: fax: SIBUR LLC Beijing Representative Office tel.: fax: / SIBUR International Gesellschhaft m.b.h. 8 Nussdorfer, Vienna, 1190, Austria tel.: fax:
Contents. Definition Structure Manufacturing Proses Applications Properties Recycling
Contents Definition Structure Manufacturing Proses Applications Properties Recycling Definition Poly(propylene) (PP) is a recyclable thermoplastic addition polymer made from the combination of propylene
More informationINTRODUCTION. Table 1. Typical applications for LDPE and Ateva EVA copolymers. Category Typical Applications Advantages
INTRODUCTION Low-density polyethylene is produced through the polymerization of ethylene by a high-pressure process. Ateva EVA copolymers are produced but copolymerizing ethylene (E) with vinyl acetate
More informationHOMOPOLYMER. Film (Extrusion) Nonwoven Spunbond. CF/BCF yarn
Injection Molding BOPP Film (Extrusion) Cast and Blown Nonwoven Spunbond HOMOPOLYMER CF/BCF yarn Staple Fiber New MFR New MFR New MFR New MFR New MFR New MFR New MFR New MFR H1850 1.2 HP522H 2 ADXP699
More informationBLOW MOULDING. Blow moulding is a process used to produce hollow objects from thermoplastic.
1 BLOW MOULDING Blow moulding is a process used to produce hollow objects from thermoplastic. The basic blow moulding process has two fundamental phases. First, a parison (or a preform) of hot plastic
More informationADK STAB FP Flame retardant for polyolefins -
February 18, 2009 ADK STAB Flame retardant for polyolefins ADK STAB is a newly developed nitrogenphosphorus based flame retardant used mainly for polyolefins and has the following advantages
More informationHalar ECTFE. Ethylene-Chlorotrifluoroethylene Typical properties
Halar ECTFE Ethylene-Chlorotrifluoroethylene Typical properties Halar ECTFE A unique combination of properties Halar ECTFE is a melt-processable fluoropolymer manufactured by Solvay Solexis in Orange,
More informationYour partner in CAPS & CLOSURES. Polyolefins. the material of choice for caps & closures.
Your partner in CAPS & CLOSURES Polyolefins the material of choice for caps & closures www.ineos.com CAPS & CLOSURES Organoleptic resins for beverage caps The consistency of beverages is preserved by using
More informationFocus on: FEP. Fluoropolymers. FEP in the fluoropolymer family.
TECHNICAL WHITEPAPER ocus on: EP Introduction Continuing our series of looking at the members of the fluoropolymer family in detail, this month we focus on EP (fluoroethylene-propylene). EP is a copolymer
More informationFibreTuff Low moisture, wood, cellulose flour composite pellet with improved performance and cost structure
FibreTuff Low moisture, wood, cellulose flour composite pellet with improved performance and cost structure Presentation by Robert Joyce of March 14, 2013 , Inc Robert Joyce President of Innovative Plastic
More informationCAS Registry Number:
Testing Status of Agents at NTP CAS Registry Number: 9002-88-4 Selected information from two of the National Library of Medicine's databases: ChemIDPlus 1 and HSDB 2. Names (NTP) () Structure Polyethylene
More informationAn Introduction to Single Screw Extrusion
An Introduction to Single Screw Extrusion Sponsored by Dynisco Feb 14 2017 Table of Contents Single Screw Extrusion Extrusion and Thermoplastics Extruder Classification Machine Construction Post Extrusion
More informationSoft, Processable SEBS Polymers for Compounds
Back to Index Soft, Processable SEBS Polymers for Compounds Dale Handlin Ph.D., Ching Ting Ph.D., Ziv Cheng, and Parashar Davé TSRC-Dexco Polymers, Plaquemine, LA, USA Abstract Two of the important trends
More informationMagnesium hydroxide [Mg(OH)2] Application Data Sheet for Ethylene-Vinyl Acetate copolymer (EVA)
FR-20 Magnesium hydroxide [Mg(OH)2] Application Data Sheet for Ethylene-Vinyl Acetate copolymer (EVA) FR-20, a series of high purity grades magnesium hydroxide, is offered by ICL-IP as inorganic halogen-free
More informationANTICIPATE CREATE INNOVATE
ANTICIPATE CREATE INNOVATE WHAT A GREAT TE TO CREATE PRODUCTS! Dear Customer, You can feel the excitement that comes with innovation. We at Ducor Petrochemicals have enjoyed that feeling as we have recently
More informationSILICONE RUBBER GUM HTV (HCE) RTV FSR LSR. OH Polymer. SiSiB SILICONES. A part of PCC group.
SILICONE RUBBER GUM RTV HTV (HCE) LSR FSR OH Polymer SiSiB SILICONES A part of PCC group. Nanjing SiSiB Silicones Co., Ltd. FSR Silicates SiSiB SILICONES, a part of PCC group, is one of the leading manufacturers
More informationProducts Capacity of HDPE plant
HDPE Products Products Capacity of HDPE plant PROPERTY MFR (190 C/5 kg) Density 1. INJECTION MOLDING GRADES UNIT (g/10 min). g/cm 3 ASTM METHOD INTERNAL METHOD D 1238 17066 ISO 1183 HC 7260 for transport
More informationHistory of Packaging. The packaging history
istory of Packaging 6000 B.. lay vessels (Keramos=krukmakarlera) 2500 B..= Glass pearls in Babylonia 1500 B..= Glass vessels in Egypt 1000 B..= Blowing glass in Syria 1600 B..= Glass bottles in Sveden
More informationw w w. b o r e a l i s g r o u p. c o m Polyolefins Moulding Bottles
I w w w. b o r e a l i s g r o u p. c o m Polyolefins Moulding Bottles I Polyolefins Moulding Bottles I www.borealisgroup.com About Borealis Borealis is a leading provider of innovative, value creating
More informationA New Styrenic Block Copolymer Designed for Polyolefin-like Processing for Compounding, Films and Fibers
A New Styrenic Block Copolymer Designed for Polyolefin-like Processing for Compounding, Films and Fibers Dale Handlin, TSRC, Shelby North Carolina, Ziv Cheng, The TSRC, Kaohsiung, Taiwan, and Mark Berard,
More informationApplication Data Sheet for Polypropylene (PP)
FR-20 Magnesium hydroxide [Mg(OH)2] Application Data Sheet for Polypropylene (PP) FR-20, a series of high purity grades magnesium hydroxide, is offered by ICL-IP as inorganic halogen free flame retardants
More informationPolypropylene engineered for a wide variety of applications
Polypropylene engineered for a wide variety of applications Injection Molding Blow Molding Extrusion Thermoforming Sheet Extrusion Total Petrochemicals USA, Inc. is one of the world s leading producers
More informationDaikin Polyflon PTFE Products
Positively Innovative Daikin Polyflon PTFE Products Product Information Guide for Aqueous Dispersions Fine Powders Granular Molding Powders Daikin America, Inc. / www.daikin-america.com / 845-365-9500
More informationTERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE
TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot
More informationSolef & Hylar PVDF. Polyvinylidene fluoride Typical properties
Solef & Hylar PVDF Polyvinylidene fluoride Typical properties Solef and Hylar PVDF A remarkable combination of properties PVDF is a fluorinated semicrystalline thermoplastic which is obtained by polymerizing
More informationProduct Capacity of HDPE plant
HDPE Products Product Capacity of HDPE plant GRADES PROPERTY UNIT MFR (190 C/2.16 kg) (g/10 min). g/l ASTM METHOD D 1238 ISO 1183 INTERNAL METHOD 17066 1. INJECTION MOLDING HC 7260 HC 7260 * HD 7255 HD
More informationLatin America Petrochemical Summit 2017
1/20 Latin America Petrochemical Summit 2017 New PE Capacity in Mexico: Update and Expected Trends for 2017 Jorge Barreda Houston, March 23rd 2017 Outlook of the Mexican PE Market 3/20 Mexican PE Market
More informationFLEXIBLE POLYMERS EXTRUSION COATING & EXTRUSION LAMINATION.... we improve your polymer
FLEXIBLE POLYMERS EXTRUSION COATING & EXTRUSION LAMINATION... we improve your polymer COATING AN LAMINATION APPLICATIONS GENERAL In extrusion coating melted polymer is extruded onto existing sheets or
More informationPolypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene):
Polypropylene (PP) Technical University of Gabrovo Milena Koleva General General Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene): Its molecular mass
More informationThermoplastic Fabrication Processes
PERP/PERP ABSTRACTS 2010 Thermoplastic Fabrication Processes PERP 08/09S4 Report Abstract March 2010 Report Abstract Thermoplastic Fabrication Processes PERP 08/09S4 March 2010 The ChemSystems Process
More informationLINEAR low density PE Grades: Based on Sclairtech solution process, offers Butene comonomer based material with narrow molecular weight distribution.
LINEAR low density PE Grades: Based on Sclairtech solution process, offers Butene comonomer based material with narrow molecular weight distribution. Physical Properties Unit Test Method FILM ROTO MOLDING
More informationGovernment of the Tyumen region. "Opportunities to create a business processing polypropylene production cluster in the Tyumen region»
Government of the Tyumen region "Opportunities to create a business processing polypropylene production cluster in the Tyumen region» 2013 «All-round redevelopment of the Tobolsk industrial complex» Tobolsk
More informationAkrilan Ltd. Vladimir, Russia. Waterborne Polymer Dispersions Production
Akrilan Ltd. Vladimir, Russia Waterborne Polymer Dispersions Production GENERAL INFORMATION 01.07.2016 2 Company History 2002 Company foundation 2009 Start of the factory first production line Start of
More informationSynthetic Petroleum-Based Polymers
Synthetic Petroleum-Based Polymers INTRODUCTION The synthetic polymer industry represents the major end use of many petrochemical monomers such as ethylene, styrene, and vinyl chloride. Synthetic polymers
More informationPP HOMO Polypropylene Homopolymer
DISCLAIMER: The following technical information and data must be considered representative or typical only and should not be used for specification purposes. To the best of our knowledge, the information
More informationJampilen Polypropylene Grades
Jampilen Polypropylene Grades HOMOPOLYMER RANDOM COPOLYMER IMPACT COPOLYMER Injection Molding FILM (BOPP-Cast) Fiber EXTRUSION & THERMO- FORMING Injection Molding FILM (Tubular-Cast) EXTRUSION & THERMO-
More informationApplications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS
Applications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS Typical applications Game consoles Handles and grips for consumer applications Headphones
More informationApplications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS
Applications in the consumer electronics section; adhesion to technical thermoplastics such as ABS, PC and PC/ABS Typical applications Game consoles Handles and grips for consumer applications Headphones
More informationPE/PP/PET /PS/PVC/PPCP/PPR
Let Us Introduce Gulf Advanced Polymers LLC was established in 2016 with the aim to become one stop source for all kind of polymer requirements. We are engaged in the distribution and trading of Plastic
More informationOlefin Block Copolymers in Health and Hygiene
Olefin Block Copolymers in Health and Hygiene Ron Weeks The Dow Chemical Company Trademark of The Dow Chemical Company Trademark of The Dow Chemical Company 1 Breakthrough Performance & Cost Olefin block
More informationPOLYOLEFINS FOR FLEXIBLE PLASTICS FILM LAMINATES
INDIAN PLASTICS INSTITUTE CHENNAI CHAPTER One Day Seminar on FLEXIBLE PLASTICS FILM LAMINATES 20th September 2004 - Hotel Savera POLYOLEFINS FOR FLEXIBLE PLASTICS FILM LAMINATES Presented by : Shri K Hariharan
More informationPERP/PERP ABSTRACTS Polypropylene PERP
PERP/PERP ABSTRACTS 2010 Polypropylene PERP 2011-5 Report Abstract March 2012 March 2012 Luann M. Farrell CHEMSYSTEMS PERP PROGRAM The ChemSystems Process Evaluation/Research Planning (PERP) program is
More informationWE OFFER: UV stabilizers Clarifiers or nucleating Odour absorbers Antistatics Flame retardants Antiblocks Foaming agents Dessicant MFI modifiers
WE OFFER: UV stabilizers protect against the harmful effects of ultraviolet rays and prevent photodegradation of synthetic materials. They help retain colour in plastic products which are exposed to the
More informationPRODUCT CATALOGUE. High Density Polyethylene T WO C O LO U R S PETROCHEMICALS
PRODUCT CATALOGUE High Density Polyethylene TIPELIN T WO C O LO U R S ONE DIRECTION Members of the MOL GROUP PETROCHEMICALS Introduction On January 1st, 2004 the Petrochemical Division of MOL Group integrating
More informationHigh Performance Plastics for the Chemical Processing Industry
High Performance Plastics for the Chemical Processing Industry 8/2017 Thermoplastics Areas of application Steel pickling Plants Over the last two decades, polypropylenes have become a more common solution
More informationAdvanced Composite Materials
Advanced Composite Materials Moscow, 2017 About Company Prepreg-ACM is a Rusnano portfolio company founded in 2009; The company is producing wide range of unidirectional, bidirectional woven and non-woven
More informationPOLYETHYLENE. for your demanding applications YOUR LIFE EVERY DAY ENHANCING
POLETHLEE for your demanding applications EHACIG OUR LIFE EVER DA EHACIG OUR LIFE EVER DA A POLETHLEE PORTFOLIO TO MEET OUR EEDS The customized attention of a niche supplier with the breadth and capacity
More informationPolymers. Historical Classification
Polymers The term polymer implies many "mers" or the building blocks...similar to the unit cell in metals. A polymer is a chemical compound or mixture of compounds formed by a process called polymerization,
More informationSCREW & BARREL METALLURGY & SERVICE LIFE. Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd.
SCREW & BARREL METALLURGY & SERVICE LIFE Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd. 1 Topics of Discussion Current Requirements Screw & Barrel Wear Types of Wear Screw & Barrel
More informationProduct and Properties Guide Alcryn fi MPR
Advanced Polymer Alloys Product and Properties Guide Alcryn fi MPR What Is Alcryn MPR? Alcryn melt-processible rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer
More informationPerformance and productivity.
Product Comparison Guide 3M Dynamar Polymer Processing Additives Performance and productivity. Proven technology from 3M, engineered for a smoother extrusion process from start to finish. Improve processing
More informationPRODUCTS PRODUCED BY POLYMIR
PRODUCTS PRODUCED BY POLYMIR Product name Grade, type Technical and normative legal acts (TNLA) for the products Low density polyethylene (LDPE) and compositions on its base LDPE grades 10204-003, 10803-020,
More informationAn extensive range of non-halogenated flame retardants
An extensive range of non-halogenated flame retardants Exolit Overview Under the tradename Exolit Clariant offers a distinctive range of non-halogenated flame retardants solutions providing more environmentally
More informationI M GREEN TM POLYETHYLENE INNOVATION AND DIFFERENTIATION FOR YOUR PRODUCT
I M GREEN TM POLYETHYLENE INNOVATION AND DIFFERENTIATION FOR YOUR PRODUCT be green and be innovative I m green TM Polyethylene: biopolymer that offers versatility and a favorable carbon footprint By using
More informationCHEMELECTRIC ELMOTEC ADDITIVE FOR PLASTIC YOUR ADDITIVE SUPPLIER
CHEMELECTRIC ADDITIVE FOR PLASTIC ELMOTEC YOUR ADDITIVE SUPPLIER Elmotec Ultralight Protection UV STABILIZER FOR PACKAGING FILM Elmotec UV 7015 CN It is a UV stabilizer masterbatch design to improve the
More information+91-8048410776 Sant Engineering Industries http://www.santengineeringindustries.co.in/ Established in the year 1966, we, Sant Engineering Industries, are the manufacturer and exporter of Extrusion, Plastic
More informationA partner in innovation: Diverse Manufacturing Capabilities
A partner in innovation: Diverse Manufacturing Capabilities - Silicone Compounding (HCR, LSR) o Silicone properties and performance can be optimized for specific applications whether an extruded or molded
More informationNew generation of aluminium hydroxide flame retardant filler for the wire and cable industry
New generation of aluminium hydroxide flame retardant filler for the wire and cable industry Dr. Reiner Sauerwein Nabaltec GmbH Overview Introduction New ATH quality product characteristics Powder handling
More informationPolyolefins. James L. White, Choi. Processing, Structure Development, and Properties ISBN Leseprobe 3
Polyolefins James L. White, Choi Processing, Structure Development, and Properties ISN 3-446-22962-0 Leseprobe 3 Weitere Informationen oder estellungen unter http://www.hanser.de/3-446-22962-0 sowie im
More informationI M GREEN TM POLYETHYLENE INNOVATION AND DIFFERENTIATION FOR YOUR PRODUCT
I M GREEN TM POLYETHYLENE INNOVATION AND DIFFERENTIATION FOR YOUR PRODUCT be green and be innovative I m green TM Polyethylene: biopolymer that offers versatility and a favorable carbon footprint By using
More informationwww.reedychemicalfoam.com FOAMS 2016 Kinetic Nucleators maximize cell distribution in foam extrusion September 14-15, 2016 2 1. Why Use Chemical Foam? 2. CFA types 3. Modern CFA Expectations 4. Nucleation
More informationHostavin N30 PP FIBERS APPLICATIONS. Classification. Technical Marketing BL Polymer Additives Technical Marketing July 2014
Hostavin N30 PP FIBERS APPLICATIONS Classification Technical Marketing BL Polymer Additives Technical Marketing July 2014 Product Overview Classification Technical Marketing BL Polymer Additives Technical
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationPERP Program New Report Alert May 2005
PERP Program New Report Alert May 2005 Nexant s ChemSystems Process Evaluation/Research Planning program has published a new report, Specialty LDPE Copolymers (03/04S9). Introduction The materials covered
More informationThe Complete Technology Book on Plastic Films, HDPE and Thermoset Plastics
The Complete Technology Book on Plastic Films, HDPE and Thermoset Plastics Author: NIIR Board of Consultants & Engineers Format: Paperback ISBN: 8178330113 Code: NI182 Pages: 608 Price: Rs. 1,175.00 US$
More informationCompounding and Processing Additives for Woodfiber-Plastic Composites
Struktol Company of America 201 E. Steels Corners Road P.O. Box 1649 Stow, OH 44224-0649 (330) 928-5188 Fax (330) 928-8726 Compounding and Processing Additives for Woodfiber-Plastic Composites Presented
More informationResearch on the Abrasion Erosion and Impact Resistance of Fiber Concrete
Research on the Abrasion Erosion and Impact Resistance of Fiber Concrete Wu, C. Department of Civil Engineering, National Chung-Hsing University (email: hubert.woo@yahoo.com.tw) Liu, Y. Department of Civil
More informationPig s Tail. protective wrapping. use pig s Tail for:
igs Pig s Tail use pig s Tail for: protective wrapping hydraulic, gas and air hoses/pipes Welding leads electrical leads sapling/plant protection Protect your investment with Pig s Tail Protective Wrapping.
More informationETHYLENE VINYL ACETATE MARKET. Trends & Forecasts to MarketsandMarkets
ETHYLENE VINYL ACETATE MARKET BY TYPE (VLEVA, LEVA, MEVA, HEVA), APPLICATION (Film, Extrusion, Non- Extrusion, Injection Molding, Coating, Wire & Cable), END-USER (Shoes & Foams, Packaging, Photovoltaic
More informationTechnical Polymer Applications
Technical Polymer Applications Commitment since 1884 About Omya Omya was founded in 1884 in Oftringen, Switzerland, under the name Plüss-Staufer. Gottfried Plüss and his father-in-law Adolf Staufer produced
More informationColour and Additive Preparations. for Extruded Polyolefin Foams
Colour and Additive Preparations for Extruded Polyolefin Foams COLOUR AND ADDITIVE PREPARATION FOR EXTRUDED POLYOLEFIN FOAMS ADDITIVES for POLYOLEFIN FOAM HP 73940 FR Flame retardant masterbatch for LDPE-films,
More informationSpecialised polyolefins. for Packaging
Specialised polyolefins for Packaging Solutions for film and fibre applications Solutions for moulding applications Polypropylene Moulding MFR 230 C, 2.16kg ISO 1133 Tensile modulus (MPa) ISO 52-2 Charpy
More informationdalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION
dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION PAGE Table of contents 1 dalcon 001 3 dalcon 006 9 dalcon 018 15 dalcon 020 17 dalcon 021 19 dalcon 025 23 dalcon 086 59 Page 1 of 16 ClactononSea dalcon
More informationVACUUM FILMS RANGE. Elongation on break. Color. Name Description Max. use T C
VACUUM FILMS RANGE Name Description Max. use T C SK2VF120-1 SK2VF125-1 SK2VF180-1 SK2VF180-2 SK2VF205-1 SK2VF205-2 SK2VF205-3 SK2VF220-1 Folding shape dimensional chart Multilayer vacuum film for manufacturing
More informationTechnical Guidebook. - Polyglycolic Acid (PGA) - KUREHA CORPORATION KUREHA AMERICA LLC. KUREHA GmbH. KUREHA (SHANGHAI) Co., Ltd.
The Pursuit of Excellence - Polyglycolic cid (PG) - Technical Guidebook KUREH CORPORTION 3-3-2 Nihonbashi-Hamacho, Chuo-Ku Tokyo, Japan 103-8552 Tel: +81-3-3249-4650 KUREH MERIC LLC 420 Lexington ve.,
More informationDryflex TPV. Thermoplastic Vulcanisate Compounds
Dryflex TPV Thermoplastic Vulcanisate Compounds CONTENTS INTRODUCTION SERIES OVERVIEW PRODUCT TESTING & PERFORMANCE What is TPV? Compression Set Behaviour TPV or TPS? GRADE TABLES Influence of Oil Dryflex
More informationTHE EFFECT OF PHTHALOCYANINE PIGMENT ON THE MICROSTRUCTURAL AND MECHANICAL PERFORMANCE OF PROPYLENE- ETHYLENE BLOCK COPOLYMER
THE EFFECT OF PHTHALOCYANINE PIGMENT ON THE MICROSTRUCTURAL AND MECHANICAL PERFORMANCE OF PROPYLENE- ETHYLENE BLOCK COPOLYMER Major, I.F.M and McNally, G.M. Polymer Processing Research Centre, Queen s
More informationMASTERBATCHES. Masterbatch Application and Selection Guide for Irrigation Pipes
MASTERBATCHES Masterbatch Application and Selection Guide for Irrigation Pipes Table of contents Page Nr Introduction 2 Definitions 3 Key Performance Requirements of Irrigation Pipes 3 Drip Irrigation
More informationFilm. Alcudia Polyethylene. Isplen Polypropylene
Film Alcudia Polyethylene Isplen Polypropylene Repsol Repsol is one of the largest energy companies worldwide and one of the biggest private Oil & Gas companies. With top quality assets in production and
More informationDevelopments in Recycled Carbon Fiber for High Volume Manufacturing. JEC Forum International Conference on Automotive Technology Knoxville, 2016
Developments in Recycled Carbon Fiber for High Volume Manufacturing JEC Forum International Conference on Automotive Technology Knoxville, 2016 Overview of ELG Carbon Fibre Established in 2011 when ELG
More informationDiscover a highly transparent Thermoplastic for eye-catching Applications: STYROLUX 3G46
Discover a highly transparent Thermoplastic for eye-catching Applications: STYROLUX 3G46 1 Requirements in the Packaging Industry Styrolux 3G46 Visibility High transparency and gloss Good practical use
More informationGlobal PE. Nick Vafiadis Director Polyolefins North America. Foro PEMEX Petroquimica Singapore Shanghai Houston New York London Düsseldorf Dubai
Global PE Nick Vafiadis Director Polyolefins North America Singapore Shanghai Houston New York London Düsseldorf Dubai Global PE Demand Growth Key Assumptions PE resin remains cost competitive which supports
More informationPolyamide 6 for Packaging and Film
Polyamide 6 for Packaging and Film Promyde is a trademark of NUREL 1 NUREL Engineering Polymers Polymerization & Polymer Additivation NUREL s long term experience in polymerization processes and polymer
More information3LPO coating systems for corrosion protection of steel pipelines for oil, gas, petrochemicals and water
3LPO coating systems for corrosion protection of steel pipelines for oil, gas, petrochemicals and water Save Resources and Protect the Environment Oil, gas, petrochemicals and water are the lifelines of
More informationIndustrial implementation of biodegradable and compostable packaging nets for agricultural and shellfish products
Industrial implementation of biodegradable and compostable packaging nets for agricultural and shellfish products [2009-2013] Reducing plastic waste and waste management costs through the development of
More informationIndustrial Climate of Plastic Sector
Government of India Ministry of MSME Industrial Climate of Plastic Sector 2015-16 Prepared by MSME-DEVELOPMENT INSTITUTE Ministry of MSME, Govt of India Narsapur Cross Roads, Balanagar, Hyderabad-500 037
More informationUltra High Molecular Weight Polyethylene (UHMWPE)
Ultra High Molecular Weight Polyethylene (UHMWPE) UTEC is the trade name of the Ultra High Molecular Weight Polyethylene (UHMWPE) developed and produced by Braskem with its own catalyst and production
More informationUltramid Balance Specialty plastics based on PA 610
Balance Balance Specialty plastics based on PA 610 BASF supplies polyamide 610 for processing by injection molding under the trade name Balance which is produced by polycondensation of hexamethylene diamine
More informationProduct Overview. Additives for Masterbatchers, Compounders and Converters
Product Overview Additives for Masterbatchers, Compounders and Converters Additives for masterbatchers, liquid colorant manufacturers and pigment, filler and flame retardant manufacturers Product Pigments
More informationHow properties of thermoplastics are affected by processing.
How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation
More informationTribute to Giulio Natta: Industrial Chemisty
Tribute to Giulio Natta: Industrial Chemisty R&D in polimeric materials Politecnico di Milano Oct 6th 2003 M. Covezzi Ferrara took 3 years to industrialize Prof G. Natta discovery. First world polypropylene
More informationPERSPECTIVES IN PLASTICS
PERSPECTIVES IN PLASTICS Welcome to the world of plastics of PiO Let s achieve things together! Our philosophy WE WOULD LIKE TO BE A RELIABLE PARTNER FOR OUR CUSTOMERS PiO is specialized in delivery and
More informationHigh Modulus Carbon Fibres in Super-Structural Compounds
High Modulus Carbon Fibres in Super-Structural Compounds As a matter of fact, even if composite properties guarantee the best answer to the most severe project requirements, many industrial products can
More informationHigh grade thermoforming applications SUSTAVACU 6 GF
High grade thermoforming applications SUSTAVACU 6 GF Thermoformable sheets made of shock-resistant, glass fibre reinforced polyamide SUSTAVACU 6 GF Material properties General properties high moisture
More informationBUREAU OF INDIAN STANDARDS. DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard)
For BIS Use Only Doc No. CED 50(7474) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard) POLYETHYLENE FITTINGS FOR USE
More information3M Dyneon Fluoropolymers. Dyneon solutions. for the Chemical Processing Industry
3M Dyneon Fluoropolymers Dyneon solutions for the Chemical Processing Industry The fluoropolymers that protect your investment 3M Dyneon S-PTFE 2 From critical process flow to harsh down-hole environments,
More informationNexantThinking TM. Low Density Polyethylene (LDPE) Process Evaluation/Research Planning. PERP December 2013
NexantThinking TM Process Evaluation/Research Planning Low Density Polyethylene (LDPE) PERP 2013-2 December 2013 JobNumber PER P PRO GRAM PER P 2013-2 NexantThinking TM Process Evaluation/Research Planning
More informationEvaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ /Binder using Full Factorial Method
Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ /Binder using Full Factorial Method M. Amran *,a, H. Hilmi b, S. Salmah c, Z. Abdullah d, E. Mohamad e, L. P. Jun f and Sivaraos
More informationTechnical and commercial considerations p. 1 Introduction p. 1 General considerations p. 1 Rigid containers p. 1 Caps, lids, closures and devices p.
Technical and commercial considerations p. 1 Introduction p. 1 General considerations p. 1 Rigid containers p. 1 Caps, lids, closures and devices p. 2 Blow-moulded containers p. 2 Flexible packaging p.
More informationfor Polymers Industry Information 0403 Focused. I nnovative. R esponsive.
Carbon Black Pigments for Polymers Industry Information 0403 Focused. I nnovative. R esponsive. 1. Introduction Orion Engineered Carbons is a leading global manufacturer of Carbon Blacks for pigment and
More informationCOMPETENCE IN TPE TPV, TPU, TPS, TPC
COMPETENCE IN TPE TPV, TPU, TPS, TPC TPV ALFATER XL ALFATER XL consists of a polypropylene matrix with a finely dispersed, crosslinked EPDM phase and belongs to the family of thermoplastic vulcanizates.
More information