The new generation of brilliance. Paliocrom Brilliant Orange

Transcription

1 The new generation of brilliance Paliocrom Brilliant Orange

2 volume (%) chroma C* Paliocrom Brilliant Orange L 2850 Paliocrom effect pigments are iron-oxide-coated aluminum flakes with excellent hiding, high chroma and high gloss. Paliocrom Brilliant is a further development based on aluminum flakes of the thin silver dollar type with a very narrow particle size distribution. This new concept is showing much higher brilliancy than the well established standard cornflake types. The first member of the new Paliocrom generation is Paliocrom Brilliant Orange L Future golden to red metallic shades will benefit from the tremendous chroma and lightness of the Paliocrom Brilliant generation. Coloristical properties of Full shade and in combination with Paliogen Red 3885 Comparison between Paliocrom Orange L 2800 and 100 face view Paliocrom Brilliant Orange L 2850 Paliocrom Orange L nm Fe 2 O 3 30 nm Fe 2 O 3 Al-cornflake-type coated with Al silver dollar type coated with Particle size distribution of the flop view L 2800 pur L 2850 pur hue h* has a much more pronounced flop-behaviour than L L L :1 L L :1 In face view it is much more chromatic and lighter full shade (de* > 15 CIELab) red reduction (de* ~ 10 CIELab) In flop view it is darker than L ,000 particle size (µm) typical particle size D 10 = 13 µm D 50 = 21 µm D 90 = 33 µm Mastersizer 2000 Version 5.12G S/N: MAL101491

3

4 Coloristical benefits of higher lightness in face view DL* > 10 CIELab units in full shade, 5 CIELab units in red reduction higher chroma DC* ~ 10 CIELab units in full shade, ~ 9 CIELab units in red reduction Paliocrom Brilliant Orange L 2850 (full shade) Paliocrom Orange L 2800 (full shade) stronger sparkle effect than classical Paliocrom types is recommended for extremely chromatic and light shades with a slight sparkle effect Paliocrom Orange L 2800 is recommended for chromatic and light shades with a smooth appearance Combination of Paliocrom Brilliant Orange and Paliocrom Orange brings more brilliancy and a balanced appearance Brilliant red metallic: 50 parts Paliocrom Brilliant Orange L parts Paliogen Red L 3885 Red metallic: 50 parts Paliocrom Orange L parts Paliogen Red L 3885

5 Technical data Chemical composition aluminum % by weight Fe 2 O % by weight mineral spirits % by weight oleic acid 1-3 % Physical form paste (35 % mineral spirits / 65 % solids) Physical data 1 ph 3-5 (4 % aq. suspension) conductivity < 200 µs/cm (10 % aq. suspension) bulk volume 1.4 l/kg 1 determined at lot 09G particle size distribution (Vol %) determined with Mastersizer 2000 Ver 5.11 (Malvern Instruments) 3 test in full shade acc. DIN EN ISO test in full shade density 1.5 g/cm 3 Particle size d 10 ~ 13 µm distribution 2 d 50 ~ 22 µm Fastness to solvents d 90 ~ 35 µm Chemical resistance HCI (2 %) no change Chemical resistance in coatings NaOH (2 %) practically insoluble in all solvents no change Heat stability 200 C Weathering 2 years Florida ongoing data 3 accelerated 4000 h ok in full shade and red reduction with P.R. 179 Humidity resistance 4 24 h, 70 C total recovery of appearance after 24 h gloss and DOI after 24 h 100 % cross hatch after 1 h ok 10 d, 40 C total recovery of appearance after 24 h gloss and DOI after 24 h 100 % cross hatch after 1 h ok

6 Contact worldwide Asia BASF East Asia Regional Headquarters Ltd. 45/F, Jardine House No. 1 Connaught Place Central Hong Kong Tel.: Fax: Europe BASF SE Pigments & Resins Europe E-EDC/FA J Ludwigshafen Germany Tel.: Fax: Eastern Europe, Africa, West Asia BASF SE Regional Business Management Pigments & Resins EUM/SE Europe House Ludwigshafen Germany Tel.: Fax: North America BASF Corporation 100 Campus Drive Florham Park, NJ USA Tel.: Fax: Tel.: Fax: South America BASF S.A. Av. Faria Lima andar Itaim Bibi São Paulo SP Brazil Tel.: Fax: The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. The agreed contractual quality of the product results exclusively from the statements made in the product specification. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed. When handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be observed. = registered trademark of BASF Group BASF SE Pigments & Resins Ludwigshafen Germany EDC 3209 e