Titel. foam conference Denmark by Martin Gorski

Transcription

1 Titel foam conference Denmark by Martin Gorski

2 topics - short company overview - where are the differences in the foam concentrates - foam logistics 2

3 3

4 Sthamex production Protein production Special agents Protein storage labatory Shipping and raw materials office filling

5 Firmenprofil Dr. Sthamer Hamburg filling plant 5

6 Firmenprofil Dr. Sthamer Hamburg - storage 6

7

8 New media like us and follow us! 8

9 Overview Foam and wetting agents Protein foams Synthetic agents P FP FFFP FFFP-AR wetting agent S S- AR AFFF AFFF-AR Special foams Fire extinguisher FETTEX training 9

10 Overview Foam and wetting agents Protein foams Synthetic agents P FP FFFP FFFP-AR wetting agent S S- AR AFFF AFFF-AR Special foams Fire extinguisher FETTEX training 10

11 How does a wetting agent like UltraWet works? 11

12 12

13 13

14 What does that mean for real Life? 1. this effect on every Class A fire - water lost surface tension - penetrating the surface of the Class A material 2. Less water needed - more efficent, less destruction and damage - first minutes huge impact with minimal resoucres 3. same effect with class A foams - from draining water (but foamy) 14

15 Overview Foam and wetting agents Protein foams Synthetic agents P FP FFFP FFFP-AR wetting agent S S- AR AFFF AFFF-AR Special foams Fire extinguisher FETTEX training 15

16 Why synthetics or multi purpose foam 1. all fluorine free non-alcohol resitant foams - low expansion foam - medium expansion foam - high expansion foam + wetting agent or CAFS % biodegradable 2. different induction rates - 3% I 1% I 0,5%. 0,3% availble 16

17 Why synthetics or multi purpose foam Depends on the task/incident you need to face - Chose foam or wetting effect - Chose your tool (cooling, throwing length, quantity ) - Chose the environmental impact - Chose training options 17

18 Successful foam attack with synthetic foams - correct induction rate - for class A fires non-aspirated or foam - for class B fires (non-polar) always aspirated (foam expansion ratio 1:5) - for class B fires (non polar) gentle application 18

19 19

20 20

21 Overview Foam and wetting agents Protein foams Synthetic agents P FP FFFP FFFP-AR wetting agent S S- AR AFFF AFFF-AR Special foams Fire extinguisher FETTEX training 21

22 Synthetic foam (AR alcohol resistant) - same like multi purpose foam (sometimes better rating) - additional polymers for alcohol resistance - without fluor surfactance - for example MOUSSOL-FF 3/6 different induction rates 22

23 Overview Foam and wetting agents Protein foams Synthetic agents P FP FFFP FFFP-AR wetting agent S S- AR AFFF AFFF-AR Special foams Fire extinguisher FETTEX training 23

24 Overview alcohol resistant and water film forming foam concentrates Synthetic agents wetting agent S S-AR AFFF AFFF-AR MOUSSOL APS 1x3 MOUSSOL APS 1/3 F-0 Premium MOUSSOL APS LV 0,5x0,5 MOUSSOL APS 3% MOUSSOL APS 3/3 F-15 Premium MOUSSOL APS LV 1x1 MOUSSOL APS F-15 MOUSSOL APS 3/6 F-15 Premium MOUSSOL APS LV 1x3 MOUSSOL APS LV 3x3 24

25 How does a MOUSSOL-APS works? 1. On non-polar Liquids (like diesel, crude oil, gasoline) - works like an AFFF and creates a µm water layer 25

26 Overview foam concentrates film forming foams 26

27 27

28 How does a MOUSSOL-APS works? 1. On non-polar Liquids (like diesel, crude oil, gasoline) - works like an AFFF and creates a µm water layer - non or semi-aspirated application 28

29 29

30 How does a MOUSSOL works? 1. On non-polar Liquids (like diesel, crude oil, gasoline) - works like an AFFF and creates a µm water layer - non or semi-aspirated application 2. On polar solvents (like ethanol, aceton, isopropyl) - low expansion foam for good polymer-layer forming 30

31 Alcohol resistant MOUSSOL polymer film forming - Formation of a polymer layer between polar solvents and foam blanket - only gentle application - Aspirated application with foam expansion ratio bigger 1:4 - monitor application wit non aspirated monitors needs to be checked 31

32 32

33 What is the issue about viskosities? all MOUSSOL-APS products are high viscose that means: - normal inductors work only up to +5 C - for lower product temp a mixing device is recommend - suction lines needs to be bigger in some cases - mixing systems on trucks needs to be checked if they can handle OTHERWISE KEEP IN MIND THAT MOUSSOL-APS LV MIGHT BE AN OPTION! LV are low viscosity products like MOUSSOL-APS LV PREMIUM 3/3 F-15 or MOUSSOL-APS LV PREMIUM 1/3 F

34 Foam expansion ratio and foam devices medium exp high expasion low expansion VZ ~ 800 non-aspirated 34

35 35

36 36

37 37

38 Foam logistics Which is the biggest foam scenario? - Fuel tank on fire? - Warehouse / logitic centrum on fire - tire fires - 38

39 39

40 40

41 41

42 Size up?! 42

43 43

44 44

45 45

46 46

47 47

48 48

49 Future technologies 49

50 50

51 Günzburger allterrain vehicle 51

52 52

53 Thank you very much for your time Any questions? 53