FCS FLUORO CARBON SEALS PVT LTD

Transcription

1 FCS FLUORO CARBON SEALS PVT LTD (an ISO 900:008 Certified Company) Quality, Reliability & Customers Satisfaction HYDRAULIC SEALS Manufacturers of, VICTREX PEEK, PCTFE, PVDF & PFA Components

2 WIPERS FCSWR0 FCSWR0A FCSWR0 FCSWR0A FCSWR0B FCSWR0C FCSWR0D FCSWR03 FCSWR0 FCSWR07 FCSWR08 FCSWR FCSWR D7 / * / * PA D7 PA D7 30 to to0 0 to 80 0 to 80 0 to 80 0 to 80 FCSWR3 / FCSWR3_E / to0 FCSWR / FCSWR / to0 FCSWR7 FCSWR8 * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel.

3 ROD SEALS FCSRS0 FCSRS0A FCSRS0B to 0 to 0 to FCSRS0C 0 to FCSRS0 FCSRS0A / / / / / / to 0 0 to 30 to 0 0 to FCSRS0B / 700 FCSRS0C / FCSRS03 / FCSRS0 // 700 FCSRS0 FCSRS08 0,3 FCSRS09 D7/ / FCSRS09A D7/ / FCSRS09B D7/ / FCSRS9 D7/ / FCSRS9B D7/ / FCSRS6 FCSRS7 FCSRS7A / to 0

4 ROD SEALS FCSRS7B / FCSRS7C // 700 FCSRS7D 0,3 FCSRS7E / to 0 0,3 FCSRS9 virgin / Vspring Filled / Vspring to 60 FCSRS9A /Vspring 00 to 60 FCSRS0 / 700 FCSRS333 / to 0 FCSRS3 0, PISTON SEALS FCSPS0 FCSPS0A FCSPS0B to 0 to 0 to FCSPS0C 0 to FCSPS0 FCSPS0A / / / / / / to 0 0 to 30 to 0 0 to FCSPS03 / FCSPS0 // 700 FCSPS0

5 PISTON SEALS FCSPS08 D7/ / bis 0 FCSPS08A /NDR D7/ / FCSPS08B D7/ / FCSPS08C / FCSPS08D / 3 FCSPS08E D7/ / FCSPS08F D7/ / FCSPS8 D7/ / FCSPS8B D7/ / FCSPS09 // FCSPS09A // FCSPS6 FCSPS6A FCSPS7 / / FCSPS7A / / FCSPS7B / / FCSPS9 virgin / Vspring Filled / Vspring to 60 FCSPS9A virgin / Vspring Filled / Vspring to 60 FCSPS0 / 700 FCSPS3 // FCSPS3 0,

6 SYMMETRICAL SEALS FCSPRS06 FCSPRS06A 300 FCSPRS06B FCSPRS06C 0,3 FCSPRS06D FCSPRS06E FCSPRS07 / FCSPRSSP 0 to 60 to 0 FCSPRS / / to 0 FCSPRS3 / / to 0 FCSPRS8 / FCSPRS9 virgin / Vspring 00 Filled / Vspring 00 to 60 FCSPRS9B virgin / Helicoil Spring 00 Filled / Helicoil Spring 00 to 60 FCSPRS9C virgin / Helicoil Spring 00 Filled / Helicoil Spring 00 to 60 FCSPRS9D virgin / Helicoil Spring 00 Filled / Helicoil Spring 00 to 60 FCSPRS / / / 30 to 0 0 to FCSPRS7 virgin illed 0 00 to 60, FCSPRS99

7 BACKUP RINGS FCSBUR08 FCSBUR09 FCSBUR FCSBUR FCSBUR FCSBUR3 60 to 0 00 to to 0 00 to to 0 00 to to 0 00 to to 0 00 to to 0 GUIDE RINGS FCSBWR0 FCSBWR0A FCSBWR03 FCSBWR0 FCSBWR0 FCSBWR06 FCSBWR07 FCSBWR08 Polyesterfabric* 60 to 0 00 to 60 0 to to 0 00 to to 0 00 to to 0 00 to to 0 00 to to 0 00 to to 0 00 to to 0 00 to 60 FCSBWR09 * Various dimensions available in reels.

8 ROTARY SEALS FCSOS0 FCSOS0 FCSOS03 /* /* / /* /* / 30 to 0 0 to 30 to 0 0 to 30 to 0 0 to FCSOS08 FCSOS08A FCSR03 / / 30 to 0 FCSR0 0 FCSR0A 0 FCSR0 0 FCSR0A 0 FCSVR06 FCSVR07 FCSR08 / 30 0, FCSR08D / 30 0, FCSR09 / 30 0, FCSR09A / 30 0, FCSR / 30 0, FCSRA / 30 0, FCSR / 30 0, FCSRD / 30 0, * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel.

9 STATIC SEALS & O RINGS FCSFL0A FCSFL0B FCSFL03 EPDM EPDM 0 to 0 to 30 0 to 0 to 30 0 to FCSFL06 virgin / Helicoil Spring 00 Filled / Helicoil Spring 60 to 00 0, FCSFL07 virgin / Helicoil Spring 00 Filled / Helicoil Spring 60 to 00 0, FCSOR FCSORH FCSORV FCSQR0 FCSQR0 FCSSS0 FCS 0 to 0 to 0 to 0 to 0 to 0 to CUSTOMIZED SEALS & MACHINED PARTS

10 MINING SEALS FCSP0 / dyn. 0 stat.** 30 to 0 FCSP0A / dyn. 0 stat.** 30 to 0 FCSP // dyn. 0 stat.** FCSPA // dyn. 0 stat.** FCSPG // dyn. 0 stat.** FCSP / 700 dyn. 0 stat.** 30 to 0 FCSP3 // 700 dyn. 0 stat.** FCSP // dyn. 0 stat.** FCSPA // dyn. 0 stat.** FCSP / / 700 dyn./0 stat.** dyn./0 stat.** / / FCSR0 // 700 FCSR0A // 700 FCSR / FCSR / to 0 FCSR3 FCSW0 FCSW FCSW3 /* 30 to 80 FCSW FCSBWR0P FCSBWR0R 60 to 0 00 to to 0 00 to 60 FCSP8 0,3 * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel.

11 TABLE OF MATERIALS Description Color Application temp. Hardn. at 0 C Main application U00R9 red 30 to + C Shore A 9 +/ Mineral oils, HFA, HFB Fluids, water, sea water, dilute acids and alkaline solutions improved chemical and thermal resistance excellent wear and friction properties POLYURETHANE * all Polyurethane grades resistant to hydrolysis UG88 light green U0OR9HT orange U30B9LT light blue U0VI9CR violet U0GM9 dark red U70D7 blue U80D7G grey 30 to + C Shore A 90 +/ 30 to +3 C Shore A 96 +/ 0 to + C Shore A 9 +/ 30 to + C Shore A 9 +/ 30 to + C Shore A 9 +/ 30 to + C Shore D 7 +/3 30 to + C Shore D 7 +/3 Mineral oils, HFA, HFB Fluids, water, sea water, dilute acids and alkaline solutions Application for pneumatic and low pressure Mineral oils, HFA, HFB Fluids, water, sea water, dilute acids and alkaline solutions Applications at high temperature Mineral oils, HFA, HFB Fluids, water, sea water Applications at low temperature Mineral oils, HFA, HFB FFluids, water, sea water Improved chemical resistance, suitable for CIP processes Mineral oils, HFA, HFB Fluids, water, sea water Improved wear and friction properties for waterhydraulics and heavy duty applications with low lubrication Mineral oils, HFA, HFB Fluids, water, sea water High pressure and extrusion resistance Backup rings or composite seals with preload element Mineral oils, HFA, HFB Fluids, water, sea water High pressure and extrusion resistance Improved wear and friction properties U03G9 green 30 to + C Shore A 9 +/ Mineral oils, HFA, HFB Fluids, water, sea water N7B8 to +0 C Shore A 8 +/ Mineral oils, HFA, HFB, HFC Fluids, cold water 9 N9B9 to +0 C Shore A 9 +/ Mineral oils, HFA, HFB, HFC Fluids, cold water FDA NW8 white to +0 C Shore A 8 +/3 Mineral oils, HFA, HFB, HFC Fluids, cold water H HNB8 to + C Shore A 8 +/ Mineral oils, HFA, HFB, HFC Fluids at high temperature Aliphatic hydrocarbons, dilute acids and bases H H RGD HN900B8RGD 0 to + C Shore A 8 +/ Mineral oils, HFA, HFB, HFC Fluids at high temperature Aliphatic hydrocarbons, dilute acids and bases RGD (ED) optimized for use in Oil & Gas Industry H RGD LT HN90B8RGD 0 to + C Shore A 8 +/ Mineral oils, HFA, HFB, HFC Fluids at high temperature Aliphatic hydrocarbons, dilute acids and bases RGD (ED) optimized for low temperature use in Oil & Gas Industry Meets the NORSOK M7 requirements F9BR8 brown 0 to + C Shore A 8 +/ Lip seals, wiper rings, vee packings, oil seals at high speed and other seal elements Mineral oils, HFD Fluids at high temperature Very good chemical resistance such as phosphates and chlorinated hydrocarbons, crude and sour gas FDA FBR8 brown to + C Shore A 8 +/ Mineral oils, HFD Fluids at high temperature Very good chemical resistance such as phosphates and chlorinated hydrocarbons, crude and sour gas FB8 to + C Shore A 8 +/ Lip seals, wiper rings, vee packings, oil seals at high speed and other seal elements Mineral oils, HFD Fluids at high temperature Very good chemical resistance such as phosphates and chlorinated hydrocarbons, crude and sour gas RGD F800B8RGD 30 to + C Shore A 8 +/ Mineral oils, HFD Fluids at high temperature Very good chemical resistance such as phosphates and chlorinated hydrocarbons, crude and sour gas RGD (ED) optimized for use in Oil & Gas Industry Meets the NORSOK M7 requirements

12 TABLE OF MATERIALS Description Color Application temp. Hardn. at 0 C Main application EPDM SILICONE TFE/P EPDM E3B8 EPDM FDA E3W8 white EPDM KTW E33W70 Silicone FDA SR8 red Silicone FDA S3BL8 blue AFLAS AFB8 P FDA TW white F TG grey 0% TBR0 bronze brown 0 to +30 C Shore A 8 +/ 0 to +0 C Shore A 8 +/3 to +0 C Shore A 8 +/ to + C Shore A 8 +/ to +80 C Shore A 8 +/3 to + C Shore A 8 +/ 00 to +60 C Shore D to +60 C 00 to +60 C Shore D 6 67 Lip seals, vee packings and other seal elements Hot water and steam, ozone, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oils Lip seals, vee packings and other seal elements Hot water and steam, ozone, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oil Lip seals, vee packings and other seal elements Hot water and steam, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oil Applicable for use in drinking water Flange seals, gaskets and other static seals Mineral oils, HFA, HFB, HFC, HFD Fluids, ozone Not recommended for dynamic applications Flange seals, gaskets and other static seals Mineral oils, HFA, HFB, HFC, HFD Fluids, ozone Not recommended for dynamic applications Lip seals, vee packings and other seal elements Mineral oils, HFA, HFB, HFC, HFD Fluids Hot water and steam, ozone, dilute acids and alkaline solutions, Sour oil and gas, amines Composite seals with elastomer preload elements, spring loaded seals, Backup and guide rings Resistance to almost all common chemicals and Fluids except molten alkaline metals. Composite seals with elastomer preaload elements Spring loaded seals, backup and guide rings Shore D 6 Resistance to almost all common chemicals and Fluids except molten alkaline metals. Glass ibre / MoS reinforced for improved wear and extrusion resistance Composite seals with elastomer preaload elements Resistance to almost all common chemicals except molten alkaline metals. Filled with 0% bronze for improved wear, pressure and extrusion resistance PLASTICS % TC carbon grey FDA PWE white PA FDA AWC natural PEEK natural PK0CN beige UHMW PE PE00HD white 00 to +60 C Shore D to +0 C 0 to +90 C 0 to + C 00 to +80 C Composite seals with elastomer preaload elements Spring loaded seals, backup and guide rings, rotary seals Resistance to almost all common chemicals except molten alkaline metals. % carbon powder friction properties and increased extrusion resistance Backup and guide rings, machined parts with tight tolerances Mineral oils, HFA, HFB, HFC Fluids Minor absorption of water, applicable for contact with foodstuff Backup and guide rings, machined parts Mineral oils, acids and dilute alkaline solutions Shore D 90 Composite seals with elastomer preload elements, Backup and guide rings high prescision parts Excellent wear, friction and extrusion properties Resistance to almost all common chemicals Backup and guide rings, spring loaded seals Mineral oils, HFC, HFD Fluids, acids and dilute alkaline solutions, Sour oil and gas Shore D 60 6 Very low water absorption, excellent friction and wear properties The indicated minimum application temperatures are thought as a general guideline, because a seal s function at low temperatures is dependent on the kind of the seal, the general application conditions, and on the kind of the surrounding metal parts the seal is in touch with. The indicated upper temperature limits may be exceeded, but this reduces the service life. Other materials available on request. In case of doubt you are always welcome to contact our application engineers.

13 (an ISO 900:008 Certified company) 3/78, Old Mahabalipuram Road, Thuraipakkam, Chennai 097. India Tel: , Telefax: fcs@fluorocarbonseals.net, info@fluorocarbonseals.net Web: Manufacturers of, Victrex PEEK, PCTFE(KelF), PFA, PVDF, VESPAL, NYLON MOS, ACETAL, DEVLON, UHMWPE, FFKM, FKM, H, EPDM and other Engineering Polymer Components. FCS 06