PROFILE RANGE. Seal Maker

Transcription

1 No Minimum Order Quantity No Start Up Charge No Tooling Limitations Bespoke Profiles Service Sample Identification Rapid Delivery Seal Maker PROFILE RANGE Approved and compliant compounds: FDA, KTW, NORSOK, 3A Sanitary Standard 803 Class III

2 Content Wipers Rod seals Piston seals Symmetrical seals Backup rings Guide rings Rotary seals Static seals & Orings Mining seals Table of materials Contact /6 3/6

3 Wipers Rod seals WR0 WR0A WR0 RS0 RS0A RS0B 300 WR0A RS0C WR0B WR0C RS0 RS0A / / / / / / to 0 30 to 0 WR0D D7 RS0B / 700 WR03 / * / * 30 to to0 RS0C / WR0 RS03 / WR07 WR08 PA D7 PA D7 0 to 80 0 to 80 0 to 80 0 to 80 RS0 // 700 RS0 WR RS08 WR RS09 D7/ / WR3 / RS09A D7/ / WR3_E / to0 RS09B D7/ / WR / RS9 D7/ / WR / to0 RS9B D7/ / WR7 RS6 WR8 RS7 * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel. RS7A / to 0 /6 /6

4 Rod seals Piston seals RS7B / PS08 D7/ / bis 0 RS7C // 700 PS08A /NDR D7/ / RS7D PS08B D7/ / RS7E / to 0 PS08C / RS9 virgin / Vspring 00 PS08D / 3 RS9A /Vspring PS08E D7/ / RS0 / 700 PS08F D7/ / RS333 / to 0 PS8 D7/ / RS3 PS8B D7/ / PS09 // Piston seals PS09A // PS0 PS0A PS0B 300 PS6 PS6A PS7 PS7A / / / / PS0C PS0 PS0A / / / / / / to 0 30 to 0 PS7B PS9 PS9A / / virgin / Vspring 00 virgin / Vspring 00 PS03 / PS0 // 700 PS0 / 700 PS3 // PS0 PS3 6/6 7/6

5 Symmetrical seals Piston, Rod seals Backup rings PRS06 BUR08 60 to 0 PRS06A 300 BUR09 60 to 0 PRS06B BUR 60 to 0 PRS06C BUR 60 to 0 PRS06D BUR 60 to 0 PRS06E BUR3 60 to 0 PRS07 / PRSSP PRS PRS3 / / / / 60 to to 0 30 to 0 PRS8 / Guide rings BWR0 BWR0A Polyesterfabric* 60 to 0 0 to to 0 PRS9 PRS9B virgin / Vspring 00 virgin / Helicoil Spring 00 BWR03 BWR0 60 to 0 60 to 0 PRS9C virgin / Helicoil Spring 00 BWR0 60 to 0 PRS9D virgin / Helicoil Spring 00 BWR06 60 to 0 PRS PRS7 / / / virgin 30 to 0 0, BWR07 BWR08 60 to 0 60 to 0 PRS99 * Various dimensions available in reels. BWR09 8/6 9/6

6 Rotary seals Static seals and Orings OS0 OS0 OS03 /* /* / /* /* / 30 to 0 30 to 0 30 to 0 FL0A FL0B FL03 EPDM EPDM 0 to 30 0 to 30 OS08 FL06 virgin / Helicoil Spring to 00 0, OS08A FL07 virgin / Helicoil Spring to 00 0, R03 R0 R0A R0 R0A / / to 0 VR06 OR ORH ORV QR0 QR0 SS0 VR07 R08 / 30 R08D / 30 Customized seals and machined parts R09 / 30 R09A / 30 R / 30 RA / 30 R / 30 RD / 30 * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel. /6 /6

7 Mining seals Mining seals P0 / dyn. 0 stat.** 30 to 0 W3 /* 30 to 80 P0A / dyn. 0 stat.** 30 to 0 W P // dyn. 0 stat.** BWR0P 60 to 0 PA // dyn. 0 stat.** BWR0R 60 to 0 PG // dyn. 0 stat.** P8 P / 700 dyn. 0 stat.** 30 to 0 * For technical reasons should be used up to a maximum temperature of 80 C only. For higher temperature we recommend Aluminum/Steel. P3 // 700 dyn. 0 stat.** P // dyn. 0 stat.** PA // dyn. 0 stat.** The listed application parameters represent only a guide and should not occur simulatneously., speed, P / / 700 dyn./0 stat.** dyn./0 stat.** / / other. The data refer to the generally valid and known data in the seal technology. By means of a careful selectionof R0 // 700 R0A // 700 R / custmoer s drawings which match the individual requirements. All seals are turned workpieces up to an outside diameter of.80 mm and can get delivered with short notice R / to 0 R3 W0 W /6 3/6

8 Table of materials Description Color Application temp. Hardn. at 0 C Main application Description Color Application temp. Hardn. at 0 C Main application U00R9 red 30 to + C Shore A 9 +/ improved chemical and thermal resistance excellent wear and friction properties EPDM E3B8 0 to +30 C Shore A 8 +/ Lip seals, vee packings and other seal elements Hot water and steam, ozone, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oils POLYURETHANE * all Polyurethane grades resistant to hydrolysis UG88 light green U0OR9HT orange U30B9LT light blue U0VI9CR violet U0GM9 dark red U70D7 blue U80D7G grey U03G9 green 30 to + C Shore A 90 +/ 30 to +3 C Shore A 96 +/ 0 to + C Shore A 9 +/ 30 to + C Shore A 9 +/ 30 to + C Shore A 9 +/ 30 to + C Shore D 7 +/3 30 to + C Shore D 7 +/3 30 to + C Shore A 9 +/ Application for pneumatic and low pressure Applications at high temperature Applications at low temperature Improved chemical resistance, suitable for CIP processes Improved wear and friction properties for waterhydraulics and heavy duty applications with low lubrication High pressure and extrusion resistance Backup rings or composite seals with preload element High pressure and extrusion resistance Improved wear and friction properties EPDM SILICONE TFE/P EPDM FDA E3W8 EPDM KTW E33W70 Silicone FDA SR8 red Silicone FDA S3BL8 blue AFLAS AFB8 P FDA TW F TG grey 0% TBR0 bronze brown 0 to +0 C Shore A 8 +/3 to +0 C Shore A 8 +/ to + C Shore A 8 +/ to +80 C Shore A 8 +/3 to + C Shore A 8 +/ 00 to +60 C Shore D to +60 C Shore D 6 00 to +60 C Shore D 6 67 Lip seals, vee packings and other seal elements Hot water and steam, ozone, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oil Lip seals, vee packings and other seal elements Hot water and steam, dilute acids and alkaline solutions. EPDM is NOT resistant against mineral oil Applicable for use in drinking water Flange seals, gaskets and other static seals Not recommended for dynamic applications Flange seals, gaskets and other static seals Not recommended for dynamic applications Lip seals, vee packings and other seal elements Hot water and steam, ozone, dilute acids and alkaline solutions, Sour oil and gas, amines Composite seals with elastomer preload elements, spring loaded seals, Backup and guide rings Composite seals with elastomer preaload elements Spring loaded seals, backup and guide rings en alkaline metals. Composite seals with elastomer preaload elements Resistance to almost all common chemicals except molten alkaline metals. Filled with 0% bronze for improved wear, pressure and extrusion resistance H N7B8 9 N9B9 FDA NW8 H HNB8 H RGD HN900B8RGD to +0 C Shore A 8 +/ to +0 C Shore A 9 +/ to +0 C Shore A 8 +/3 to + C Shore A 8 +/ 0 to + C Shore A 8 +/ Aliphatic hydrocarbons, dilute acids and bases Aliphatic hydrocarbons, dilute acids and bases RGD (ED) optimized for use in Oil & Gas Industry PLASTICS % TC carbon grey FDA PWE PA FDA AWC natural PEEK natural PK0CN beige UHMW PE PE00HD 00 to +60 C Shore D to +0 C 0 to +90 C 0 to + C Shore D to +80 C Shore D 60 6 Composite seals with elastomer preaload elements Spring loaded seals, backup and guide rings, rotary seals Resistance to almost all common chemicals except molten alkaline metals. % carbon powder friction properties and increased extrusion resistance Backup and guide rings, machined parts with tight tolerances Minor absorption of water, applicable for contact with foodstuff Backup and guide rings, machined parts Mineral oils, acids and dilute alkaline solutions Composite seals with elastomer preload elements, Backup and guide rings high prescision parts Excellent wear, friction and extrusion properties Resistance to almost all common chemicals Backup and guide rings, spring loaded seals Very low water absorption, excellent friction and wear properties H RGD LT HN90B8RGD 0 to + C Shore A 8 +/ Aliphatic hydrocarbons, dilute acids and bases RGD (ED) optimized for low temperature use in Oil & Gas Industry Meets the NORSOK M7 requirements F9BR8 brown 0 to + C Shore A 8 +/ Lip seals, wiper rings, vee packings, oil seals at high speed and other seal elements phosphates and chlorinated hydrocarbons, crude and sour gas FDA FBR8 brown FB8 to + C Shore A 8 +/ Very good chemical resistance such as phosphates and chlorinated hydrocarbons, crude and sour gas to + C Shore A 8 +/ Lip seals, wiper rings, vee packings, oil seals at high speed and other seal elements phosphates and chlorinated hydrocarbons, crude and sour gas The indicated minimum application temperatures are thought as a general guideline, because a seal s function at low temperatures is dependent on the kind of the seal, the general application conditions, and on the kind of the surrounding metal parts the seal is in touch with. The indicated upper temperature limits may be exceeded, but this reduces the service life. Other materials available on request. RGD F800B8RGD 30 to + C Shore A 8 +/ phosphates and chlorinated hydrocarbons, crude and sour gas RGD (ED) optimized for use in Oil & Gas Industry Meets the NORSOK M7 requirements In case of doubt you are always welcome to contact our application engineers. /6 /6

9 FLUID SEALING SPECIALISTS FOR OVER 0 YEARS 3 MILLION INVENTORY HQ & CENTRAL WAREHOUSE Reginald Road Smethwick West Midlands B67 AS Tel + (0) 9 80 Fax + (0) sales@barnwell.co.uk BRISTOL Unit 3 Avonbank Industrial Centre West Town Road Avonmouth Bristol BS 9DE Tel + (0)7 98 Fax + (0) bristol@barnwell.co.uk DARTFORD Unit 7 Schooner Park Crossways Business Park Dartford Kent DA 6NW Tel + (0) Fax + (0) dartford@barnwell.co.uk GLASGOW 6 Murray Place Righead Industrial Estate Bellshill Lanarkshire ML 3LP Tel + (0) Fax + (0) scotland@barnwell.co.uk MANCHESTER Unit 36/37 Westbrook Trading Estate Westbrook Road Trafford Park Manchester M7 AY Tel + (0) Fax + (0) manchester@barnwell.co.uk EXPORTS Reginald Road Smethwick West Midlands B67 AS Tel + (0) 9 80 Fax + (0) export@barnwell.co.uk Copyright 07 M.Barnwell Services Limited. All rights reserved. E & OE. Pictures representation only. Items in this publication may not necessarily be manufactured under a registered ISO 900 management system. All Trademarks acknowledged. TEL: +(0) SALES@.CO.UK