quality Grotto Stone and Grotto Architectural Series are made from the highest quality materials and are designed to last for generations.
|
|
- Bonnie Francis
- 6 years ago
- Views:
Transcription
1 + G r o t t o S t o n e & A r c h i t e c t u ra l S e r i es 1
2 Grotto Stone and Grotto Architectural Series are made from the highest quality materials and are designed to last for generations. Grotto Stone creates an old world look while capturing the essence of nature. A pallet of 8 beautiful blended colors are available to choose from. The Grotto Architectural Series evokes the time-honored traditions of days past with an attractive alternative to standard precision block. It is available in 6 color blends to coordinate with Grotto Hardscapes products. quality 2
3 Grotto Architectural Series is manufactured by Chandler Concrete Company, Inc., formerly known as Marshall Concrete Products. The Architectural Series consists of dimensional split face concrete masonry units (also shown on page 7 of this brochure) and was developed for both veneer and load bearing masonry applications. Color selection s can be made from a variety of blends giving the Architect complete flexibility of design. Architect should specify weathered or un-weathered units to achieve desired aesthetic effect. Specification Contractor shall build 48x48 sample panels on site to demonstrate aesthetic effects for each color blend specified. Clean on half of the exposed face of panels with masonry cleaners specified. Approval of samples panel is for color, texture and blending of units: relationship of mortar to masonry colors: tooling of joints, aesthetic quality of workmanship and other material and construction qualities specifically approved by Architect. Performance Provide solid veneer Grotto Architectural Series units that develop a unit net area compressive strength of 3000 PSI at 28 days in accordance with ASTM C-140. Units shall be medium weight with a minimum density of 105 PCF and a maximum density of 125 PCF. Absorption shall not exceed 15 PCF. Workmanship Contractor is to provide shapes and sizes of units necessary to achieve structural design and aesthetic effect desired by Architect. Care should be taken to keep units dry while being stored on job site. Care should also be taken to prevent as much as possible mortar dropping onto the face of split face units. Grotto Stone is manufactured by Chandler Concrete Company, Inc., formerly known as Marshall Concrete Products. Color schemes are a mixture of blended colors and shapes as named and provided by the manufacturer. Contractor shall build 48 x 48 sample panels on site to demonstrate aesthetic effects for each color scheme specified. Clean one half of exposed face of panels with masonry cleaner specified. Approval of sample panels is for color, texture, and blending of units: relationship of mortar to masonry colors: tooling of joints, aesthetic quality of workmanship and other material and construction qualities specifically approved by architect. Performance Provide solid veneer Grotto Stone units that develop a unit net area compressive strength of 3000 PSI at 28 days in accordance with ASTM C-140. Units shall be medium weight with a minimum density of 105 PCF and a maximum density of 125 PCF. Absorption shall not exceed 15 PCF. Workmanship Grotto Stone units are to be laid in a random pattern with care taken to assure that units of like size, shape, and color are randomly distributed throughout the wall to achieve the desired aesthetic effect. Cutting and facing of individual units to fit into specific wall location is the responsibility of the contractor. 3
4 Grotto Stone is available in 8 natural color schemes. Grotto Stone shapes and colors can be custom blended to provide any unique color and texture desired. Sequoia Blend Sierra Blend streng Sunset Blend lakeshore Blend 4
5 Autumn Blend Savanna Blend th colorado Blend Orchard Blend 5
6 Grotto Architectural Series is available in 6 color blends to coordinate with your Grotto Hardscapes projects. Canyon Blend Hickory Blend Walnut Blend Granite Blend Cedar Blend chestnut Blend Chestnut Blend Walnut Blend Architect should specify units to be weathered or unweathered to achieve desired aesthetic effect. Architect can specify a mixture of the above blends to achieve a custom color scheme cedar Blend 6
7 Shapes and Sizes 3 5 / / x8 Sill Unit 8x8 Sill Unit 8x8x4 Half 11 5 / / 8 8x8x8 Half 12x8x8 Half 4x12x4 Return Corner 2 1 / / / / 8 12x8x4 Return Corner 2 1 /4x12x4 Return Corner 2 1 /4x16x4 4x4x16 4x8x16 Hollow 4x8x16 Solid 4x8x16 L-Corner 8x8x16 Return Corner 8x8x / / 8 8x8x16 Bond Beam (Hollow or Solid Bottom) 12x8x16 12x8x16 Bond Beam (Hollow or Solid Bottom) 7
8 + beauty Manufactured by Chandler Concrete Company, Inc., formerly known as Marshall Concrete Products 1006 South Church Street Burlington, NC NC Highway 105 S Boone, NC 700 Block Lane Christiansburg, VA Industrial Drive Danville, VA
quality Grotto Architectural Series and Grotto Stone are crafted from the highest quality materials and are designed to last for generations.
+ q u a l i t y, c o l o r, s t r e n g t h & b e a u t y + Grotto Architectural Series and Grotto Stone are crafted from the highest quality materials and are designed to last for generations. Grotto
More informationq u a l i t y, c o l o r, s t r e n g t h & b e a u t y
q u a l i t y, c o l o r, s t r e n g t h & b e a u t y + + Grotto Architectural Series and Grotto Stone are crafted from the highest quality materials and are designed to last for generations. GROTTO
More informationSECTION SPLIT FACE CONCRETE MASONRY UNITS
SECTION 04223 SPLIT FACE CONCRETE MASONRY UNITS ***** E. Dillon & Company manufactures the following high quality, custom produced, architectural concrete masonry units (CMU) using superior colored aggregates
More informationSECTION GROUND FACE CONCRETE MASONRY UNITS
SECTION 04222 GROUND FACE CONCRETE MASONRY UNITS ***** E. Dillon & Company manufactures the following high quality, custom produced, architectural concrete masonry units (CMU) using superior colored aggregates
More informationConditions of the Contract and Division 1 General Requirements are a part of this section.
NOTES TO SPECIFIER General notes about the specifications and the reasons for them are listed here in general statements. Use this as a guide when choosing the correct selection of statements that apply
More informationCONCRETE MASONRY UNITS Sizes & Shapes Manual
Our mission is to be the supplier of choice that provides the highest quality of construction products and services for our valued customers. CONCRETE MASONRY UNITS Sizes & Shapes Manual ESTIMATING GUIDES
More informationREFLECTIVE FACE CONCRETE MASONRY UNITS
SECTION 04221 REFLECTIVE FACE CONCRETE MASONRY UNITS ***** E. Dillon & Company manufactures the following high quality, custom produced, architectural concrete masonry units (CMU) using superior colored
More informationNative Custom Stone Guide Specification 1/30/2012 SECTION MANUFACTURED STONE VENEER
1/30/2012 SECTION 04 70 00 MANUFACTURED STONE VENEER PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Manufactured stone veneer masonry, accessories, and related materials. 1.2 SUBMITTALS A. Product
More informationCONCRETE MASONRY VIEW BOOK
CONCRETE MASONRY VIEW BOOK MUNICIPAL RETAIL EDUCATIONAL ////////////////////////////////////////////////////// THE PERFECT FIT FOR ALL INDUSTRIES DESIGNED TO INSPIRE When you build, you want it to last
More informationMaster Specifications for Microcotta November 2017
SECTION 042130 - MICROCOTTA PART 1 - GENERAL 1.1 SUMMARY A. Provide Architectural Microcotta, cast architectural polymer resin units manufactured in accordance with the Contract Documents. 1.2 WORK INCLUDED
More informationTribute Retaining Wall System Traditional Split Face & Rustic Finish Styles
Tribute Retaining Wall System Traditional Split Face & Rustic Finish Styles Silvertone Rustic Tribute Retaining Wall System Make a Tribute to creative landscaping The Tribute Retaining Wall System offers
More informationQUALITY ASSURANCE BASED ON BRICK AND MORTAR TESTS
Technical Notes 11C - Guide Specifications for Brick Masonry, Part 4 Rev. [July 1972] (Reissued May 1998) INTRODUCTION This issue of Technical Notes and the following issue, Technical Notes 11D, contain
More informationGLACIAL TILL STONE SPECIFICATIONS
GLACIAL TILL STONE SPECIFICATIONS PART 1: GENERAL 1.1 PRODUCT USES A. Stone Cladding (interior and exterior walls). B. Stone Patios. C. Stone Waterfalls. D. Stone Walkways. E. Stone Driveways. F. Stone
More informationComposite / Veneer Units. Precision...1. Split Face... 2
Composite / Veneer Introduction...i Composite / Veneer Units Precision...1 Split Face...... 2 Composite Masonry Applications, Construction, Standards...3 Anchored Veneer Applications, Construction, Standards...4
More informationSpecifier Note: Retain material(s) below to conform to project requirements.
550 E 56 HWY STE B OLATHE, KS 66061 PHONE: 913.254.9300 FAX: 913.254.9301 The Canyon Stone Spec. Manual specifies manufactured stone veneer, manufactured brick veneer and manufactured stone trim. These
More informationSPECIFICATIONS MODERRA MORTARLESS MASONRY VENEER
SPECIFICATIONS MODERRA MORTARLESS MASONRY VENEER PART 1: GENERAL 1.01 Section Includes A. Product description and definitions. B. Constructing base ledge for concrete wall units. C. Installing modular
More informationHammerStone Manufactured stone veneers for commercial & residential applications
HammerStone Manufactured stone veneers for commercial & residential applications Veneer Stone Specification Guide Section 04711: Manufactured Stone Veneer Use this specification guide for each individual
More informationConcrete Block Machines Typical Fixed Block Machine
SEAOG 2016 Masonry Workshop Concrete Masonry Units and Terminology Concrete Masonry in Georgia Georgia World Congress Center Reference: Inspector s Handbook Masonry Institute of America Roy Keck, FACI
More informationBUILDING STONE PRODUCTS, INC.
Specifications for Renaissance Masonry Units Developed by Arriscraft International Corporation To be used as a guide for Architectural Specifications Product A calcium silicate building unit produced for
More informationSECTION (Master Format, 1995 Edition, 04700) MANUFACTURED MASONRY
SECTION 04 70 00 (Master Format, 1995 Edition, 04700) MANUFACTURED MASONRY PART I - GENERAL 1.01 SUMMARY A. Section Includes: Manufactured Stone Veneer, Manufactured Stone Trim, and Application Materials.
More informationArchitectural Cast Stone
Architectural Cast Stone TECHNICAL RESOURCES AT A GLANCE Specification Standards Technical Bulletins The purpose of this publication is to assist the architect and engineer by providing up to date information
More informationInterior Fireplaces Commercial Exterior Residential Remodeling
2017-2018 Catalog Interior Fireplaces Commercial Exterior Residential Remodeling Ashlar Autumn Colorado Mojave Nevada Refton Sarasota Timbercreek Above - Sarasota A combination of clean lines and natural
More informationSPECIFICATION GUIDELINE
SPECIFICATION GUIDELINE Environmental Stoneworks Corporate Office 6300 East Stapleton Drive South Denver, CO 80216 Phone (303) 309-3040 Fax (303) 309-3059 www.estoneworks.com Environmental Stoneworks specification
More informationPOLISHED & TEXTURED Concrete Masonry Units from Best Block
POLISHED & TEXTURED Concrete Masonry Units from Best Block POLISHED & TEXTURED: ADDING VERSATILITY TO OUR GROUND FACE LINE. The distinctive appeal of our Polished & Textured Collection results from revealing
More informationCOPING and STOOLS - EXTERIOR CUBIC STONE COPING AND WALLS DATA SHEET 1.0 INTRODUCTION 2.0 DESIGN CRITERIA EXTERIOR CUBIC STONE COPING AND WALLS
COPING and STOOLS - EXTERIOR CUBIC STONE COPING AND WALLS 1.0 INTRODUCTION 1.1 Installation Method. There are several methods by which cubic coping and walls can be installed. Consideration should be given
More informationConcrete Masonry. Weights and Process. Grades & Types
Concrete Masonry Weights and Process Two basic weights Normal weight 40 lbs. / unit 1,200-1,800psi comp strength Lightweight 22-28 lbs. / unit 700-1,000 psi comp strength Molded with a very dry mix - 3
More informationDesigning With Colored Concrete Masonry
Article Reprint Designing With Colored Concrete Masonry DESIGNING WITH colored The CMU colors used on the Alpenglow Elementary School in Eagle River, Alaska, were selected to help the school fit into its
More informationMANUFACTURER S SPECIFICATION
MANUFACTURER S SPECIFICATION Eldorado Stone Corporation PO Box 489 Carnation, WA 98014 Tel: (800) 925-1491 Fax: (425) 333-4755 e-mail: general@eldoradostone.com website: www.eldoradostone.com SECTION 04730
More informationResidential Installation
Residential Installation 51 Masonry Cement Shouldice Designer Stone recommends the use of Type N masonry mixed at a ratio of 3 to 1 with clean sharp masonry sand. Type S masonry should not be used in conjunction
More information1. Repairing brick masonry, including replacing damaged units as indicated on drawings. 2. Repointing mortar joints.
SECTION 040120 BRICK MASONRY REPAIR AND REPOINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationfor Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Mortar-Set Concrete Tiling Installations Large Scale CalArc Pavers are part of the California Architectural
More informationArchitectural Series
Nothing Else Stacks Up! Architectural Series Interstate Brick: Beau ful, Durable, Sustainable! When Interstate Brick Company was formed in 1891, the founders established one simple goal: To be the best
More informationOptimizing Mortar Formulations for Maximum Performance
Optimizing Mortar Formulations for Maximum Performance Concrete masonry units (CMUs) and mortar go together like bread and butter. For thousands of years, engineers, architects and tradesmen have married
More informationCalifornia Architectural Pavers for Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: California Architectural Pavers for Mortar-Set Concrete Tiling Installations Stepstone, Inc. also manufactures California Architectural
More informationArchitectural Series
Nothing Else Stacks Up! Architectural Series Interstate Brick: Beautiful, Durable, Sustainable! When Interstate Brick Company was formed in 1891, the founders established one simple goal: To be the best
More information/TRF BuyLine the beauty of natural stone the advantage of concrete masonry
04 22 23/TRF BuyLine 8551 the beauty of natural stone the advantage of concrete masonry The Performance you Expect The Economy you Want From top to bottom, PRAIRIE stone can economically supply you with
More informationSECTION INTERLOCKING PRECAST CONCRETE UNIT PAVERS
SECTION 321413.13 INTERLOCKING PRECAST CONCRETE UNIT PAVERS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interlocking concrete paver units. 2. Sand setting bed. 3. Sand joint
More informationMaximum Value. Maximum Performance.
Maximum Value. Maximum Performance. ARCHITECTURAL CONCRETE MASONRY UNITS SUSTAINABLE TIMELESS AESTHETICS COST EFFECTIVE TO BUILD AND MAINTAIN UNMATCHED, TIME-TESTED QUALITY ENVIRONMENTALLY FRIENDLY MAXBRIC
More informationMaximum Value. Maximum Performance.
Maximum Value. Maximum Performance. ARCHITECTURAL CONCRETE MASONRY UNITS SUSTAINABLE TIMELESS AESTHETICS COST EFFECTIVE TO BUILD AND MAINTAIN UNMATCHED, TIME-TESTED QUALITY ENVIRONMENTALLY FRIENDLY MAXBRIC
More informationResidential Installation
Residential Installation 51 Masonry Cement Shouldice Designer Stone recommends the use of Type N masonry mixed at a ratio of 3 to 1 with clean sharp masonry sand. Type S masonry should not be used in conjunction
More informationNarrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations
The following specification refers to the Stepstone, Inc. product known as: Narrow Modular Pavers (NMP) for Mortar-Set Concrete Tiling Installations Narrow Modular Pavers are part of the California Architectural
More informationINSULATED CONCRETE MASONRY UNITS Section 04220
INSULATED CONCRETE MASONRY UNITS Section 04220 PART 1 GENERAL 1.01 Summary A. Section Includes 1. Insulated masonry wall units (CMU's) 2. Decorative insulated masonry wall units 1.02 SUBMITTALS A. Samples:
More informationSECTION BRICK MASONRY ASSEMBLIES
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Face brick. 2. Mortar and grout. 3. Ties and anchors. 4. Miscellaneous masonry accessories. 1.2 SUBMITTALS A. Product Data: For each type
More informationLightweight, insulated, energy efficient cladding changing the way we think about masonry construction.
Lightweight, insulated, energy efficient cladding changing the way we think about masonry construction. Office Building Rhode Island DS277 Commercial Building San Mateo, CA NEWBRICK IS DESIGNED WITH THE
More informationLightweight, insulated, energy efficient cladding changing the way we think about masonry construction.
Lightweight, insulated, energy efficient cladding changing the way we think about masonry construction. Office Building Rhode Island DS277 Commercial Building San Mateo, CA NEWBRICK IS DESIGNED WITH THE
More informationSpec Master 5/7/ For each product requiring color and texture selection, provide full size samples.
SECTION 04812 (042012) MECHANICALLY ATTACHED BRICK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSPECIFICATION GUIDELINE
Environmental StoneWorks specification guideline should be used to assist design professionals in the preparation of projects. Edit and delete items that may not be applicable. Verify all referenced section
More informationKELLER PARKWAY - FM 1709
Jurisdiction of Project REGULATORY AUTHORITIES: CITY OF KELLER COMMUNITY DEVELOPMENT MAILING ADDRESS: P.O. BOX 770, KELLER, TX 76244-0770 PHYSICAL ADDRESS: KELLER TOWN HALL, 1100 BEAR CREEK PKWY COMMUNITYDEVELOPMENT@CITYOFKELLER.COM
More informationLightweight, insulated, energy efficient cladding changing the way we think about masonry construction.
Lightweight, insulated, energy efficient cladding changing the way we think about masonry construction. Office Building Rhode Island DS277 NEWBRICK IS A LIGHTWEIGHT INSULATED BRICK PRODUCT. It retains
More informationCTP STITCH-TIE AGAIN! Quick and easy way to re-anchor existing veneers to back-up structures.
Helical Wall Tie System for Stabilizing Veneers and Structural Repair AGAIN! ANOTHER CTP SOLUTION! CTP STITCH-TIE Quick and easy way to re-anchor existing veneers to back-up structures. Brick to Concrete
More informationMOUNTAIN STONE Products
MOUNTAIN STONE Products PRODUCT USERS GUIDE Mountain Stone Products P.O. Box 20308 42102 4301 Industrial Road Bowling Green, KY. 42101 (270) 796-6123 (270) 796-6131 (800) 781-0277 Local Fax Nationwide
More informationSpecifying the Integral Water Repellent For Masonry Mortar
Specifying the Integral Water Repellent For Masonry Mortar (Short Form Specification) Specification RainBloc for Mortar Integral Water Repellent for Mortar Short-form Specification (For inclusion in Section
More informationAvailable in Full Veneer and Thin Veneer er Units. Full Veneer Shapes and Sizes... Page. Thin Veneer Shapes and Sizes... Page 74
Available in Full Veneer and Thin Veneer er Units Full Veneer Shapes and Sizes... Page 72 Thin Veneer eer Shapes and Sizes... Page 74 Sage and Custom Color 24 24 County Stone Masonry Units Custom Color
More informationBUILD IT BEAUTIFULLY ARCHITECTURAL MASONRY PRODUCTS
BUILD IT BEAUTIFULLY ARCHITECTURAL MASONRY PRODUCTS You may already know that CEMEX is one of the leading producers of cement, aggregate and ready-mix concrete in the United States. You may not know that
More informationGeneral. Masonry Design Standard
General In general, follow the guidelines below when designing and specifying clay and concrete masonry and accessories. Unless specifically indicated otherwise, these guidelines are not intended to restrict
More informationLightweight, insulated, energy efficient cladding changing the way we think about masonry construction.
Lightweight, insulated, energy efficient cladding changing the way we think about masonry construction. Commercial Building Shelton, CT DS277 Office Building Schenectady, NY NEWBRICK IS DESIGNED WITH THE
More informationN G I a S o l i d Design S Statement E D
a S o l i d Design Statement DESIGN T a b l e o f C o n t e n t s The strength, permanence and beauty of stone are benchmark qualities behind many architectural designs, whether contemporary or traditional;
More informationA. ASTM C190 - Test Method for Tensile Strength of Hydraulic Cement Mortars
SECTION 04850 (04 40 00) MSI PRECAST STONE VENEER SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. MSI Precast Stone Veneer for exterior and interior vertical surfaces. 1.2 RELATED SECTIONS Specifier Notes:
More informationIntroducing a complete line of Limestone Classics TM Building Veneers from Indiana Limestone Company. Genuine Indiana Limestone the natural and
Introducing a complete line of Limestone Classics Building Veneers from Indiana Limestone Company. Genuine Indiana Limestone the natural and innovative design solution for your residential and commercial
More informationCoping and Stools. An excerpt from the Dimension Stone Design Manual, Version VIII (May 2016)
Coping and Stools An excerpt from the Dimension Stone Design Manual, Version VIII (May 2016) Produced and Published by the Marble Institute of America 380 East Lorain St. Oberlin, Ohio 44074 Telephone:
More informationA. JANDRIS & SONS Guide Specifications in CSI Format SECTION CONCRETE UNIT MASONRY
SECTION 042200 PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Work Included: Provide labor, materials and equipment necessary to complete the work of this Section, including but not limited to the following:
More informationOneStone.
www.pavingstones.com The Wall System The system is a modular concrete retaining wall system that is used to stabilize and contain earth embankments, large or small. The system is based on the principles
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MORTAR AND MASONRY GROUT
SECTION 04110 MORTAR AND MASONRY GROUT PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. In the absence of other information, the methods and recommendations of the National Concrete Masonry Association
More informationCONCRETE AND HAYDITE BLOCKS
CMU Catalog 2016 4 SERIES UNITS 4-01 Partition Concrete Weight 25 lbs. Haydite Weight 18 lbs. 144 / 180 per pallet 4-02 Half Partition Concrete Weight 13 lbs. Haydite Weight 7 lbs. 288/ 360 per pallet
More informationPisaLite.
PisaLite www.pavingstones.com The PisaLite Wall System The PisaLite system is a modular concrete retaining wall system that is used to stabilize and contain earth embankments, large or small. The PisaLite
More informationDIVISION 04 MASONRY CAST STONE. A. Design Considerations. 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone.
DIVISION 04 MASONRY 04720 CAST STONE A. Design Considerations 1. Cast stone shall comply with ASTM C1364, Standard Specification for Cast Stone. 2. Care must be taken in the design of individual units
More informationd 'International Finishing Ltd.,
NCRETE ( SYSTEMS > d 'nternational Finishing Ltd., Unit 19, Southlink ndustrial Park, Ballycurreen Rd., Frankfield, Cork, reland. T +353-21-4964521 F: +353-21-4964028 E: info8ifl.ie W: www.ifl.ie "The
More informationArchitectural Stone Cladding System
Architectural Stone Cladding System Sell up to stone. The more exterior cladding options you can offer a potential customer, the better the chance you ll get the job. Capture more squares on the wall and
More informationConcrete Masonry Units
Concrete Masonry Units Tab Section 1 T a b 1 Table of Contents T o p i c P a g e # P r e c i s i o n C o n c r e t e M a s o n r y U n i t s. C M - 2 P r e c i s i o n B l o c k D r a w i n g s C M - 4
More informationPisaLite & OneStone. PisaLite. OneStone. Two Segmental Retaining Wall Systems designed for ease of use and low maintenance.
& OneStone Two Segmental Retaining Wall Systems designed for ease of use and low maintenance. OneStone www.pavingstones.com The Wall System No Fill Hollow Core Lateral Interlock with Jumbo Unit Integral
More informationLimited Exterior Masonry Assessment Roosevelt Elementary School
Limited Exterior Volume 2 of 2 November 29. 2007 Produced for: Medford Public Schools Medford, Oregon In Consultation with: 710 NE 21 st Avenue, Suite 200, Portland, Oregon 97232 P: 503.517.0283 F: 503.517.0285
More informationDIVISION 4 MASONRY DIVISION 4 - MASONRY
DIVISION 4 MASONRY DIVISION 4 - MASONRY 85 SECTION 04000 - MASONRY 04000 - MASONRY PART 1 - GENERAL 1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationISB 020 Design and Detail of Reinforced Hollow Clay Masonry
ISB 020 Design and Detail of Reinforced Hollow Clay Masonry Interstate Brick H C Muddox Jeff Elder, SE, LEED AP General Sales Mgr Objectives Hollow Clay Masonry Units - Manufacturing. Environmental practices.
More informationBlock & Brick SOUTH QUEENSLAND
Block & Brick Landscaping PRODUCT GUIDE Guide SOUTH QUEENSLAND Contents The National Masonry range Contents Product Disclaimer... 2 About National Masonry... 2 Smooth d Blocks 100mm Series... 3 120mm Series...
More informationSECTION Vitrified Clay Wall Coping 2014
SECTION 04220 2014 PART 1 GENERAL 1.1 DESCRIPTION A. SCOPE OF WORK 1. Provide new coping as indicated on Drawings. B. RELATED SECTIONS 1. Section 02050: Selective Demolition. 2. Section 07650: Metal Flashing.
More informationMasonry movement joints
Masonry movement joints are one of the most misunderstood and underappreciated technical issues in the masonry industry. The lack of properly located, detailed, specified, and installed masonry movement
More informationProduct Guide. Featuring Estate Veneer Series, Urban Hardscapes for Landscaping, and Limestone Blocks & Slabs
Product Guide Featuring Estate Veneer Series, Urban Hardscapes for Landscaping, and Limestone Blocks & Slabs Physical Characteristics, Performance Table Indiana Limestone complies with the requirements
More informationSECTION CLAY MASONRY UNITS. Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2009 ARCAT, Inc. - All rights reserved
SECTION 04 21 29 CLAY MASONRY UNITS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2009 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Face brick. B.
More informationStoneLedge. TrueTumbled Segmental Retaining Wall System. Versatile and elegant, Stoneledge walls give modern structures old world style.
Desert StoneLedge Standard StoneLedge Versatile and elegant, Stoneledge walls give modern structures old world style. The Design Advantage StoneLedge is a double-sided, multi-sized, tapered unit system
More informationsplit face and smooth face architectural blocks dimensions and product data TECHNIcal
split face and smooth face architectural blocks dimensions and product data 02-2013 TECHNIcal general Information Architectural concrete masonry ranks with the highest quality materials used for exposed
More informationSample Specification
Sample Specification Enclosed is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry
More informationNATURAL STONE PRODUCTS.
NATURAL STONE PRODUCTS www.k2stone.com INSPIRATION GALLERY ARBUTUS FIELDSTONE SHADOW RIDGE RANDOM NATURAL / ARBUTUS BLEND BLACK PEARL LEDGESTONE COURSED PACIFIC ASHLAR K2 STONE VENEER PROFILES VIEW ALL
More informationSample Specifications
Sample Specifications Below is a template for you to use in preparing a final, quarry tile specification incorporating products manufactured by Metropolitan Ceramics, by Ironrock Capital, Inc. Quarry tile
More informationThe Admixture Systems business of BASF Corporation previously conducted business as Degussa Admixtures, Inc. and Master Builders, Inc.
Note to Specifier: The Admixture Systems business of BASF Corporation previously conducted business as Degussa Admixtures, Inc. and Master Builders, Inc. BASF has launched the Master Builders Solutions
More informationREINFORCED CONCRETE MASONRY SECTION
SECTION 04 22 02 - REINFORCED CONCRETE MASONRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 01 Specification
More informationLS 2519 CONCRETE PAVER PAVEMENT RECONSTRUCTION
LS 2519 CONCRETE PAVER PAVEMENT RECONSTRUCTION A. Section Includes B. References C. Quality Assurance D. Submittals E. Delivery, Storage and Handling F. Environmental Conditions G. Summary H. Concrete
More informationDURRELL DESIGN GROUP, PLLC ROOF REPLACEMENT BARR ELEMENTARY SCHOOL JACKSON PUBLIC SCHOOL DISTRICT JACKSON, MISSISSIPPI.
DURRELL DESIGN GROUP, PLLC 500-G E. WOODROW WILSON AVENUE JACKSON, MISSISSIPPI 39216 PHONE: 601.708.4788 FAX: 601.488.4717 ROOF REPLACEMENT BARR ELEMENTARY SCHOOL JACKSON PUBLIC SCHOOL DISTRICT JACKSON,
More informationNATURAL STONE PRODUCTS.
NATURAL STONE PRODUCTS www.k2stone.com INSPIRATION GALLERY ARBUTUS FIELDSTONE SHADOW RIDGE RANDOM NATURAL / ARBUTUS BLEND BLACK PEARL LEDGESTONE COURSED PACIFIC ASHLAR K2 STONE VENEER PROFILES VIEW ALL
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS UNIFORM EVALUATION SERVICES EVALUATION CRITERIA FOR ANCHORED MASONRY VENEER SYSTEM WITH POLYSTYRENE FOAM PLASTIC BACKING EC 021-2014 (Adopted
More informationBYU CITY FIRE STATION
SECTION 04810 - UNIT MASONRY ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationAIA Disclaimer Notice
AIA Disclaimer Notice This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement
More informationSECTION DRY-PLACED GRANITE
SECTION 04 41 11 DRY-PLACED GRANITE This guide specification utilizes recommendations and formats contained in references of the Construction Specifications Institute (CSI), including the CSI Practice
More informationSECTION MORTAR
PART l - SCOPE SECTION 04100 - MORTAR A. This Section includes all labor, materials, equipment, and related items required for the work of mortar as shown on the Drawings and specified herein. The work
More informationThe Ideal Balance of Beauty, Performance & Value. Real Clay Thin Brick for Precast and Tilt-up Panels
The Ideal Balance of Beauty, Performance & Value Real Clay Thin Brick for Precast and Tilt-up Panels Precast and Tilt-up embedded clay thin brick dramatically transform a building s exterior. For precast
More informationDIVISION 04 MASONRY. Section Title Number MASONRY Maintenance of Masonry Masonry Mortaring Masonry Accessories
04 00 00 MASONRY 04 01 00 Maintenance of Masonry 04 01 20 Maintenance of Masonry 04 05 13 Masonry Mortaring 04 05 23 Masonry Accessories 04 20 00 UNIT MASONRY 04 21 00 Clay Unit and Brick Veneer 04 22
More informationDURABLE AFFORDABLE EASY TO INSTALL. RidgeRock THE ENGINEERED SEGMENTAL RETAINING WALL SYSTEM
DURABLE AFFORDABLE EASY TO INSTALL RidgeRock THE ENGINEERED SEGMENTAL RETAINING WALL SYSTEM CHANDLERCONCRETE.COM R I D G E R O C K INTEGRAL SHEAR KEY SYSTEM Each unit is composed of an integrated, user-friendly
More informationSTRENGTH AND DURABILITY OF THE INSTALLED STONE
BEAUTY STRENGTH DURABILITY At Cast Natural Stone, we build each and every stone to stand up to the most brutal weather conditions. And with our manufacturing and headquarters located in Wisconsin, we know
More informationDesign and Architectural Services BRICK MASONRY PRESENTATIONS
BRICK MASONRY PRESENTATIONS ** - HSW credit offered Available AIA Program Titles Water Penetration Resistance in Brick Veneer ** Exploring the Many Advantages of Big Brick IECC and Masonry Compliance Options**
More informationWALL SYSTEMS ( Ref: The Building Illustrated, Ching, Francis DK )
WALL SYSTEMS ( Ref: The Building Illustrated, Ching, Francis DK ) 1.0 Comparative wall systems Wood stud walls * walls are normally 2x4, but may be 2x6. * studs are spaced 16. * studs carry vertical loads.
More informationeducation. As such, it does not include content that may be deemed or construed to be an This course is registered with AIA
Provider #: A022 Design Tactics for Stone Masonry Course Number: HTS17SM Credit(s) earned on completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA
More information