Huskvarna Manufacturing
|
|
- Anthony Mitchell
- 6 years ago
- Views:
Transcription
1 Management system Quality & Environment Title: Rev no: 11 Doc no: ESAT-86UCW7 Author Approver Sera Akincilar Marcus Sennevik Date: Type: Routine R0221-Packaging instructions for suppliers to Huskvarna Manufacturing Packaging and Delivery Instruction Huskvarna Manufacturing Huskvarna Sweden Printed document only valid 06/10/2017 Page 1 of 32 Doc no:esat-86ucw7 Rev no:115
2 Table of Contents 1 Introduction Responsibility Packaging types Description of Packaging Types... 5 Packaging type Y1 Half pallet... 5 Packaging type Y2 Half pallet with cardboard boxes... 6 Packaging type Y3 Half pallet with cardboard boxes... 7 Packaging type Y4 Half pallet with a cardboard box... 8 Packaging type Y6 - Pallet... 9 Packaging type Y7 Pallet with a cardboard box Packaging type X20 Half pallet with collars Packaging type X21 Pallet with collars Packaging type X30 Half pallet with plastic boxes Packaging type X40 Half pallet with plastic boxes Packaging type X60 Cover 1200 x 800 mm Packaging type X62 Cover 600 x 800 mm Packaging type Y8 Packing Labelling General Guidelines for Deliveries Packaging Size & Shape Packaging Quality & Protection Packaging Selection Labelling Homogenous & Mixed Handling Units Appendix Delivery Note Way Bill (Bill of Loading) Invoice Printed document only valid 06/10/2017 Page 2 of 32 Doc no:esat-86ucw7 Rev no:115
3 1 Introduction This document contains the packaging types, parts labelling specifications and general guidelines for deliveries that suppliers to Huskvarna Manufacturing must follow when delivering parts and goods to factories on Huskvarna site. Document also includes an appendix part where examples of a Delivery Note, a Way Bill and an Invoice can be found. Contact Persons For any further question regarding packaging, please contact following departments. Contact person Questions about Responsible Logistics Engineer Transport / Outside packaging, labelling Responsible Supplier Quality Engineer Technical questions about packaging, protection of items Responsible Material Planner Delivery quantity, delivery address Responsible Purchaser Price related question 2 Responsibility Unless there is no other agreement, all suppliers are obligated to use packaging types that are presented in R0221-Packaging instructions for suppliers to Huskvarna Manufacturing. Suppliers are not allowed to use tailored solutions. Besides specific Husqvarna instructions and R0221-Packaging instructions for suppliers to Huskvarna Manufacturing, suppliers are responsible to ensure parts integrity and packaging maintains its initial condition until point-of-use in Huskvarna Manufacturing. In the event of failure to follow delivery requirements of Husqvarna Manufacturing, delivered goods can be returned at the expense of the deliverer and/or invoiced for additional costs associated with corrective actions on site such as repackaging, sorting, adjusting etc. Printed document only valid 06/10/2017 Page 3 of 32 Doc no:esat-86ucw7 Rev no:115
4 3 Packaging types The packaging type for each specific part will be agreed on with the supplier at the quotation and order procedure. In the document the following packaging types are described: Packaging type Y1 - Half pallet Packaging type Y2 - Half pallet with a cardboard box (8 boxes) Packaging type Y3 - Half pallet with a cardboard box (16 boxes) Packaging type Y4 - Half pallet with a cardboard box Packaging type Y6 - Pallet Packaging type Y7 - Cardboard box Packaging type X20 - Half pallet with frame Packaging type X21 - Full pallet with frame Packaging type X30 - Half pallet with a plastic box (8 boxes) Packaging type X40 - Half pallet with a plastic box (16 boxes) Packaging type X60 and X62 with Cover Packaging type Y8 Packing Printed document only valid 06/10/2017 Page 4 of 32 Doc no:esat-86ucw7 Rev no:115
5 3.1 Description of Packaging Types Packaging type Y1 Half pallet Picture 1. Packaging type Y1, description of a half pallet Name Half pallet Maximum outer size 600 x 800 x 144 mm, see drawing picture 1 Maximum weight per pallet 320 kg Wood: Material pallet - Solid wood Respect for the environment according to current EU-regulations. The supplier has to meet the EU-regulation 2001/219/EG, heat treatment of pallets. Further information on 15) Plastics: - Light coloured - Recyclable plastics In order to be able to process the half pallet in the material handling system at Huskvarna Manufacturing OS/OL the pallet is not allowed to have the following damages: Other Boards are missing or having crossway cracks Block is missing, is sloping or is cracked Nails are sticking out from the boards The pallet is seriously polluted with oil, grease etc. Printed document only valid 06/10/2017 Page 5 of 32 Doc no:esat-86ucw7 Rev no:115
6 Packaging type Y2 Half pallet with cardboard boxes Picture 2. Packaging type Y2, description of half pallet with cardboard boxes Name Half pallet Cardboard box Maximum weight per box Measures per box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Half pallet with cardboard boxes According to packaging type Y1 20 kg 395(+-5) x 595(+-5) x 200 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 8 - Cardboard boxes must be placed in even layers on the pallet - All boxes have to contain the same number of parts - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips - The main label shall be placed on the first layer of boxes, on the box to the left on the long side of the pallet, see picture Printed document only valid 06/10/2017 Page 6 of 32 Doc no:esat-86ucw7 Rev no:115
7 Packaging type Y3 Half pallet with cardboard boxes Picture 3. Packaging type Y3, description of half pallet with cardboard boxes Name Half pallet Cardboard box Maximum weight per box Measures per box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Half pallet with cardboard boxes According to packaging type Y1 20 kg 395(+-5) x 295(+-5) x 200 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 16 - Cardboard boxes must be placed in even layers on the pallet - All boxes have to contain the same number of parts - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips - The main label shall be placed on the first layer of boxes, on the box to the left on the long side of the pallet, see picture Printed document only valid 06/10/2017 Page 7 of 32 Doc no:esat-86ucw7 Rev no:115
8 Packaging type Y4 Half pallet with a cardboard box Picture 4. Packaging type Y4, description of a half pallet with a cardboard box Name Half pallet Cardboard box Measures box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Half pallet with a cardboard box According to packaging type Y1 600 x 800 x 800 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 1 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips The label shall be placed on the lower part of the box to the left corner on the long side of the pallet, see picture Staples may be used a maximum of 6 mm to label the pallet. Note: Staples may be used only with cardboard boxes Printed document only valid 06/10/2017 Page 8 of 32 Doc no:esat-86ucw7 Rev no:115
9 Packaging type Y6 - Pallet Picture 5. Packaging type Y6, description of a pallet Name Maximum outer size Maximum weight unit Material pallet Pallet 1200 x 800 x 144 mm, see drawing picture 500 kg Wood: - Solid wood Respect for the environment according to current EU-regulations. The supplier has to meet the EU-regulation 2001/219/EG, heat treatment of pallets. Further information on 15) Plastics: - Light coloured - Recyclable plastics In order to be able to process the half pallet in the material handling system at Huskvarna Manufacturing OS/OL the pallet is not allowed to have the following damages: Other Boards are missing or having crossway cracks Block is missing, is sloping or is cracked Nails are sticking out from the boards The pallet is seriously polluted with oil, grease etc. Printed document only valid 06/10/2017 Page 9 of 32 Doc no:esat-86ucw7 Rev no:115
10 Packaging type Y7 Pallet with a cardboard box Picture 6. Packaging type Y7, description of a pallet with a cardboard box Name Full pallet Cardboard box Measures box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Pallet with a cardboard box According to packaging type Y x 800 x 800 mm 1200 x 800 x 950 mm (Maximum measures) 500 kg 1 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips - The label shall be placed on the lower part of the box, on the short side of the pallet, see picture Staples may be used a maximum of 6 mm to label the pallet. Note: Staples may be used only with cardboard boxes Printed document only valid 06/10/2017 Page 10 of 32 Doc no:esat-86ucw7rev no:115
11 Packaging type X20 Half pallet with collars Picture 7. Packaging type X20, description of a half pallet with collars Name Half pallet Pallet frame Measures per collar Unit Outer size Maximum weight unit Maximum number of collars per unit Other Half pallet with collars According to packaging type Y1 600 x 800 x 200 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 4 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips - The label shall be placed on the lower part of the collar, on the long side of the pallet, see picture Printed document only valid 06/10/2017 Page 11 of 32 Doc no:esat-86ucw7rev no:115
12 Packaging type X21 Pallet with collars Picture 8. Packaging type X21, description of a pallet with collars Name Full pallet Pallet frame Measures per collar Unit Outer size Maximum weight unit Maximum number of collars per unit Other Full pallet with collars According to packaging type Y x 800 x 200 mm 1200 x 800 x 950 mm (Maximum measures) 500 kg 4 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - The unit has to be weather protected and securely fixed with plastic strips - The label shall be placed on the lower part of the collar, on the short side of the pallet, see picture Printed document only valid 06/10/2017 Page 12 of 32 Doc no:esat-86ucw7rev no:115
13 Packaging type X30 Half pallet with plastic boxes Picture 9. Packaging type X30. description of a half pallet with plastic boxes Name Half pallet Plastic box Maximum weight per box Measures per box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Half pallet with plastic boxes According to packaging type Y1 20 kg 600 x 400 x 200 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 8 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - All boxes have to contain the same number of parts - The unit has to be weather protected and securely fixed with plastic strips - The box label shall be placed on the side of the box, see picture -The main label shall be placed on the first layer of boxes, on the box to the left on the long side of the pallet, see picture Note: It is forbidden to use the staple on plastic boxes during application of the label Printed document only valid 06/10/2017 Page 13 of 32 Doc no:esat-86ucw7rev no:115
14 Packaging type X40 Half pallet with plastic boxes Picture 10. Packaging type X40. description of a half pallet plastic boxes Name Half pallet Plastic box Maximum weight per box Measures per box Unit Outer size Maximum weight unit Maximum number of boxes per unit Other Half pallet with plastic boxes According to packaging type Y1 20 kg 400 x 300 x 200 mm 600 x 800 x 950 mm (Maximum measures) 320 kg 16 - The components must be placed in even layers at the pallet - When packed supplier must make sure that the pallet is undamaged - All boxes have to contain the same number of parts - The unit has to be weather protected and securely fixed with plastic strips - The box label shall be placed on the front side of the box, see picture - The main label shall be placed on the first layer of boxes, on the box to the left on the long side of the pallet, see picture Note: It is forbidden to use the staple on plastic boxes during application of the label. Printed document only valid 06/10/2017 Page 14 of 32 Doc no:esat-86ucw7rev no:115
15 Packaging type X60 Cover 1200 x 800 mm Name Cover Packaging type X62 Cover 600 x 800 mm Name Cover Printed document only valid 06/10/2017 Page 15 of 32 Doc no:esat-86ucw7rev no:115
16 Packaging type Y8 Packing Name Full pallet Maximum outer size Maximum weight unit Maximum number of boxes per unit Other Pallet According to packaging type Y x 800 x 144 mm, see drawing picture 500 kg 1 The unit has to be weather protected and securely fixed with plastic strips The label shall be placed on the short side of the pallet, see picture - Deck or bottom boards missing or transverse cracks - Kloss missing, crooked, cracked or - Nails protruding from the deck or bottom boards - The stool is grossly contaminated with oil, grease or the like Note Deviating pallet dimensions must contain the same package protection Overhang of the packaging outside the pallet may not occur Printed document only valid 06/10/2017 Page 16 of 32 Doc no:esat-86ucw7rev no:115
17 4 Labelling All units with parts to Huskvarna Manufacturing must be labelled in a clear manner according to the following instructions. Likewise all numbers given must correspond on every document that is sent. Delivery note number, Husqvarna part number, Husqvarna supplier number and Husqvarna contract/order number shall be clearly stated on both the Invoice and the Delivery note. Labelling Address All units have to be addressed according to the delivery plan or with the address given at the order. Labelling- Each box All cardboard boxes at the pallet have to be labelled with: Receiver- Including full address Delivery Note Number Husqvarna Article/Part Number Quantity of parts per box Supplier Number Package Number Gate Senders name and address Net weight (kg) Gross weight (kg) Number of packages Part Description Date of shipping, Technical status Batch Number Label-example-Each box (Odette code 39) Label 200 mm x 150 mm Printed document only valid 06/10/2017 Page 17 of 32 Doc no:esat-86ucw7rev no:115
18 Labelling- (The bottom- left box) The box in the bottom- left corner shall have two labels. One ordinary, (described above) and one main label referring to the entire pallet. This main label has to be labelled with: Receiver- Including full address Delivery Note Number Husqvarna Article/Part Number Quantity of parts for all boxes Supplier Number Package Number Gate Senders name and address Net weight (kg) Gross weight (kg) Number of packages Part Description Date of shipping, Technical status Batch Number Label-Example- Bottom left box(odette cod 39) Label 200 mm x 150 mm Printed document only valid 06/10/2017 Page 18 of 32 Doc no:esat-86ucw7rev no:115
19 5 General Guidelines for Deliveries 5.1 Packaging Size & Shape a. Unless there is no other agreement, maximum measurements of handling units are fixed and cannot be compromised. Half pallet unit: 600 x 800 x 950 mm Y2/X30 Boxes: 600 x 400 x 200 mm Pallet unit: 1200 x 800 x 950 mm Y3/X40 Boxes: 300 x 400 x 200 mm DO Husqvarna Standard Measurement X DON T Various Box Sizes and Shapes b. Packaging should be designed in a way that it can easily be transported by using forklifts, automated material handling equipment and pallet jacks. Consider handling restrictions in warehousing and transport and avoid wedge shaped packaging and overhang of products on the edge of pallet. c. Damage can occur in transit, when a pallet doesn t have a flat top surface and consists of different size of containers, therefore the components must be placed in even layers on the pallet. Printed document only valid 06/10/2017 Page 19 of 32 Doc no:esat-86ucw7rev no:115
20 X DON T Over-sized / Non-ergonomic stacking Wedge shaped Overhang on the pallet X DON T Uneven layers / Wedged shaped Misaligned boxes Overhang on the pallet 5.2 Packaging Quality & Protection a. Packaging should protect its content from damage by contamination, moisture, shock, vibration, compression, temperature, corrosion, and other external/internal factors that can be harmful to products. Packaging must resist weather and other conditions that can occur during transport. Printed document only valid 06/10/2017 Page 20 of 32 Doc no:esat-86ucw7rev no:115
21 DO Build pallets that would maintain their initial condition and protect their content through the entire supply chain X DON T Use poor quality packaging material Oddly-shaped containers/pallets X DON T Partially cover pallet X DON T Loose stretch film that flaps Block opening between deck boards Printed document only valid 06/10/2017 Page 21 of 32 Doc no:esat-86ucw7rev no:115
22 b. Transportation unit must be securely fixed preferably with plastic straps (Local / Regional suppliers) and/or stretch films according to instructions in earlier parts of this document. c. It is not allowed to use steel or any other hard material straps rather than plastic, since it can harm workers. d. Stretch films should be tight and cover the entire unit without blocking opening between deck boards. e. When using plastic straps, maximum allowed height by Husqvarna (950 mm) should be considered. Pallets cannot be stacked and strapped together. f. Straps should be single and placed on the long side of the pallet (for half pallet). DO Consider allowed max pallet height (950 mm) Straps should be on the long side of pallet Make sure that straps are tightly fixed and they do not block barcodes X DON T Stack and strap two or more pallets together Exceed allowed max pallet height (950 mm) Do not mix different types of boxes (i.e X30/X40) on the same pallet Printed document only valid 06/10/2017 Page 22 of 32 Doc no:esat-86ucw7rev no:115
23 g. Packaging should be designed in a smart way that it would minimize non-value adding activities such as repacking, individual packaging protection etc. DO Consider smarter packaging & protection such as whole layer and/or whole pallet protection to minimize unpacking time X DON T One-piece item protection *(Unless it is agreed upon with Husqvarna) 5.3 Packaging Selection There are 2 standard pallet types are presented in this document and suppliers to Husqvarna Manufacturing are obligated to use them during deliveries. Pallet Type Dimensions (Width x Length in mm) Husqvarna Selection Comments Half Pallet (Y1) Euro Pallet (Y6) Sea / EUR 2-3/ Non-Standard Pallets 600 x Majority of all items 800 x Very few items No standard Not Preferred Exception, very rare Half Pallet (Y1): Majority of items should be delivered with this pallet type. There only can be exceptions, if the item size doesn t allow use Half Pallet type. Euro Pallet (Y6): If ONLY items wouldn t fit Half Pallet, because of items dimensions, Euro Pallet can be used. Sea / EUR 2-3/ Non-Standard Pallets: These pallet types are not mentioned in R0221-Packaging instructions for suppliers to Huskvarna Manufacturing, since they do not fit Huskvarna Manufacturing automated material handling system. Hence, they should ONLY be used, if the specific items dimension wouldn t allow usage of Half Pallet or Euro Pallet types. Printed document only valid 06/10/2017 Page 23 of 32 Doc no:esat-86ucw7rev no:115
24 5.4 Labelling a. All units with parts that are delivered to Huskvarna Manufacturing must be clearly labelled according to instructions has been given earlier parts of this document. Each individual box and pallet as a whole unit must be labelled with Odette Transport Labels (OTL). b. The format of the OTL is similar to A5 paper size and it shall NOT be printed on larger paper sizes, e.g. A4. DO A5 Paper Format X DON T A4 Paper Format c. Paper that the label is printed on should have a certain quality that it assures information on the label is readable through the whole supply chain. Preferably labels are adhesive and they do not attached with staple and it is forbidden to use staple with packaging types X30 and X40. d. Main label should always be placed at the bottom-left part of the pallet unit, on the long side of the pallet (see picture below). Box labels should be placed according to earlier instructions that have given when presenting packaging types. Printed document only valid 06/10/2017 Page 24 of 32 Doc no:esat-86ucw7rev no:115
25 DO Have clear labels for each box and one main label that refers to the entire pallet. Box Label (On each box) Main Label (The bottom-left box) e. When using stretch films and/or plastic strips, in order to secure transport package, do not block barcodes on OTL. Whole surface of the label should be visible and barcodes should be readable during automatic scanning process without any manual handling. f. Make sure to remove all other irrelevant labels e.g. supplier internal labels, previous transport labels, before dispatching unit to Huskvarna Manufacturing. This is because they may interfere with automatic scanning and storage processes. Printed document only valid 06/10/2017 Page 25 of 32 Doc no:esat-86ucw7rev no:115
26 DO Have ONLY relevant transport labels Make sure labels are readable through supply chain by automatic scanners X DON T Have irrelevant labels on transport packages X DON T Block/cover labels when securing the pallet Be aware that plastic covered labels are less visible. Unless there is no other agreement, they shouldn t be preferred by local / regional suppliers. For overseas deliveries, labels can be attached with label holders. Printed document only valid 06/10/2017 Page 26 of 32 Doc no:esat-86ucw7rev no:115
27 5.5 Homogenous & Mixed Handling Units There are two main component warehouses in Huskvarna Manufacturing and each is regulated by different rules. Information about which warehouse an article is stored in is clearly stated on supplier delivery schedules and can also be learned by responsible material planner. It is crucially important that items are packed according to warehouse requirements that they belong to. Warehouse Code Warehouse Name Components Handling Units 01 Pallet Warehouse Large-Medium Size and/or High Volume Small-Size 05 Box Warehouse Small-Medium Size ONLY Homogenous Mixed (Homogenous) & Pallet Warehouse (01) stores Large-Medium Size items and/or High Volume Small-Size items. All packaging types that are presented in this document can be stored in this warehouse, but it is important that handling unit is homogenous; in other words only one type of Article Number per pallet, no mixture of different articles. Simple Homogenous Handling Unit Main Label (The bottom-left box) Box Warehouse (05) stores Small-Medium Size items and as it can be understood by its name only boxes i.e. packaging types Y2, Y3, X30 and X40 that are presented in this document can be stored in this warehouse. For items that are stored in Box Warehouse (05) outer dimensions of boxes are fixed and cannot be compromised. Outer dimensions are stated in earlier chapters of this document. Printed document only valid 06/10/2017 Page 27 of 32 Doc no:esat-86ucw7rev no:115
28 Box Label (On each box) Homogenous Handling Unit (small boxes) Main Label (The bottom-left box) Handling units that are stored in Box Warehouse (05) can either be homogenous or mixed; i.e in other words there can be several Article Numbers on one pallet. However, it is important that different box types e.g. X30 and X40 are not mixed on the same pallet. Goods labels for Homogenous Handling Units with small boxes can be seen above and goods labels for Mixed Handling Units are as below. Additionally, it is important that Main Label of Mixed Handling Units do not block Box Labels and they are readable through. Printed document only valid 06/10/2017 Page 28 of 32 Doc no:esat-86ucw7rev no:115
29 Box Label (On each box) Mixed Handling Unit (small boxes) Main Label (The bottom-left box) (Mixed Handling Unit) Printed document only valid 06/10/2017 Page 29 of 32 Doc no:esat-86ucw7rev no:115
30 6 Appendix Delivery Note All deliveries to Huskvarna Manufacturing have to contain a delivery document placed on one of the units the delivery contains. The delivery document has to be attached by sticks or tape, and shall be easily accessed at Huskvarna Manufacturing The delivery document has to include the following information: Delivery note number Address for unloading and terminal number Husqvarna parts number Husqvarna contract/order number Delivered quantity Name of the supplier Number of units and type of units Supplier Number A delivery note number must be unique for each delivery document. In partial shipments a new number must be generated each time. A supplier using Husqvarna AB web-portal must specify the specific delivery note number that is used in the Web-portal on all documents, including the invoice. Delivery Note- Example Printed document only valid 06/10/2017 Page 30 of 32 Doc no:esat-86ucw7rev no:115
31 Way Bill (Bill of Loading) All deliveries to Huskvarna Manufacturing have to be sent together with a Way Bill. This is the document sent with the carrier, and shall be given to Huskvarna Manufacturing at arrival. The Way Bill has to include the following information: Address for unloading and terminal number Delivery note number Gross weight Name of the supplier Number of units and type of units Parts made of plastics with a warning-triangle on the drawing should unconditionally be marked with labelling specification of material of origin of which they are made. This is a requisite for certification. The loading of the parts must be done in a way to make it easy to identify all units. Way Bill- example Printed document only valid 06/10/2017 Page 31 of 32 Doc no:esat-86ucw7rev no:115
32 Invoice Every invoice sent to Husqvarna AB needs to contain information so that the invoice could be matched with the goods. This information is matched against the delivery note and other documents sent with the goods which means that these numbers must be equivalent on all documents. As a supplier using Husqvarna AB web- portal, the data given in the web- portal shall also be equivalent to the data on all documents. If the invoice refers to one delivery containing one or many articles, sent with only one delivery note, then one delivery note number may be given for the entire invoice. (See example below) If the invoice instead refers to more than one delivery sent with more than one delivery note, then the delivery note numbers must be specified for each row of the invoice. In partial deliveries shall the invoice refer to the goods that are sent and that particular unique delivery note number. When the next part of the delivery is sent (with a new delivery note number. The invoice has in order to match with the goods include the following information: Delivery Note Number Husqvarna Part Number Husqvarna Order Number Supplier Number Invoice-Example Printed document only valid 06/10/2017 Page 32 of 32 Doc no:esat-86ucw7rev no:115
Packaging and Shipping Guidelines for Suppliers and Customers Status:
Packaging and Shipping Guidelines for Suppliers and Customers Status: 25.08.2015 Target This guideline aims the properly packaging as well as the avoidance of corrosion of the goods and also to reduce
More informationLOGISTICS GUIDE Version English version
LOGISTICS GUIDE Version 2012-1 English version Table of contents 1. Introduction... 3 2. Master data... 4 2.1 Product dimensions... 4 2.2 Weight... 5 2.3 Packaging and palletising... 5 2.4 Pallet type...
More informationDelivery specifications of Telegärtner Karl Gärtner GmbH
Delivery specifications of Telegärtner Karl Gärtner GmbH Table of contents 1 Purpose & Scope... 2 2 General provisions... 2 2.1 Cargo securing... 2 2.2 Delivery notes... 2 2.3 Delivery of large quantities...
More informationGeneral packaging instructions_en
Seite 1 / 9 1. Objective of the general packaging provisions The objective is to provide our suppliers with simple and practical guidelines that outline our requirements and supplier responsibilities and
More informationIMMI PROCEDURE: PUR-03 REVISION H MANUFACTURING DEPARTMENT
IMMI PROCEDURE PUR-03 REVISION H MANUFACTURING DEPARTMENT PROCEDURE: Supplier Packaging Guidelines DISTRIBUTION: DATE WRITTEN: July 26, 1994 REV. EFFECTIVE: July 19, 2013 This is a CONTROLLED procedure.
More informationKSS GLOBAL STANDARD. Global Supplier Packaging Guidelines
KSS GLOBAL STANDARD Document No: 1024318 Author: Thomas Shannon Valeriu Cristea Approved by: Paul Biegen Document History Revision: Release Date ECP No. Modification 1 02-2010 Created 2 11-2013 68903 Updated
More informationCustomer Packaging Guidelines
Customer Packaging Guidelines Customer Packaging Guidelines 05.02.16 v1 CONTENTS Introduction Packaging Tips: Parcels Envelopes Packaging Tips: Pallets Crates Drums Pipes Spools & Reels Packaging Tips:
More informationSOP: Onsite I.T. Asset Collection Non-Leased Assets
SOP: Onsite I.T. Asset Collection Non-Leased Assets CREW CERTIFICATION: Only crews with at least one Certified I.T. Asset Handler may be dispatched to perform I.T. asset pickups. CREW SIZE: The number
More informationInox Mare shipping and packaging instructions compliance
Inox Mare shipping and packaging instructions compliance General Remarks All deliveries to our companies must be made in compliance with following instructions. These shipping and packaging instructions
More informationÅhléns Delivery Instructions Private Label
Åhléns Delivery Instructions Private Label CONTENTS Page 1 DEFINITIONS... 3 GENERAL INSTRUCTIONS ALL SHIPMENTS... 4 2 DELIVERY... 4 3 GOODS LABELLING CASES AND INNERS... 4 4 PACKAGING MATERIALS... 5 5
More informationDesign guideline for pallets within Ericsson
DESIGN RULES 1 (1) Design guideline for pallets within Ericsson Summary This document describes design guidelines that shall be considered when pallets are designed within Ericsson. General This document
More informationPackaging Instructions
1.0 Scope of application The packaging guidelines apply for all deliveries. Variations or modifications have to be approved by REAL INNENAUSBAU AG. These packaging guidelines are valid immediately on receipt
More informationDelivery and packaging guidelines
Delivery and packaging guidelines Inhaltsverzeichnis Preface... 1 1 Packaging policy... 2 1.1 General information... 2 1.2 Delivery guidelines... 3 1.3 General packaging requirements... 3 1.4 Type of packaging...
More informationDevelop a product. Suppliers are encouraged to work closely with packaging suppliers and customers in developing new products.
Develop a product Development of a product Suppliers are encouraged to work closely with packaging suppliers and customers in developing new products. Areas affected by, and subject to guidelines from
More informationSOP: Onsite I.T. Asset Collection Non-Leased Assets
SOP: Onsite I.T. Asset Collection Non-Leased Assets CREW CERTIFICATION: Only crews with at least one Certified I.T. Asset Handler may be dispatched to perform I.T. asset pickups. CREW SIZE: The number
More informationDelivery type. Materials
Operational standard 2010-12-10-en Delivery type Materials BtN 67-1 1. Scope This operational standard (in the following BtN) defines the delivery of all materials to the Busch-Jaeger Elektro GmbH (in
More informationBufab document Page 0/11 Date Version 1.1 BUFAB SUPPLIER MANUAL
Bufab document Page 0/11 Version 1.1 BUFAB SUPPLIER MANUAL Bufab document Page 1/11 Contents Inquiry/offer... 3 Order... 3 Sales confirmation... 3 Transport... 3 Invoice... 3 Delivery delays... 4 Packaging
More informationIMMI PROCEDURE: PUR-03 REVISION G MANUFACTURING DEPARTMENT
IMMI PROCEDURE PUR-03 REVISION G MANUFACTURING DEPARTMENT PROCEDURE: Supplier Packaging Guidelines DISTRIBUTION: DATE WRITTEN: July 26, 1994 REV. EFFECTIVE: June 21, 2004 This is a CONTROLLED procedure.
More informationBUFAB Supplier Manual 2.0
Page 1/11 BUFAB Supplier Manual 2.0 Page 2/11 Table of contents Flowchart order handling... 2 Order handling... 3 Packing instructions... 4 General... 4 Labels... 5 Pallets... 5-6 Packing pallets... 6
More informationPick, pack and mark the delivery
Pick, pack and mark the delivery Picking, packing and labelling of the delivery This sub process describes the requirements, recommendations and guidelines STAND has, which may be relevant for effectuate
More information1. General regulations
Page 1 von 1 1. General regulations 1.1 Parts shall be packaged by item. 1.2 The parts will be welded and powder-coated or galvanised at a later stage. The surfaces shall therefore be dry and free of paint,
More informationLogistics Handbook for Suppliers. Specifications for Packaging and Delivering Purchased Parts
Logistics Handbook for Suppliers Specifications for Packaging and Delivering Purchased Parts Version: June 2011 Contents 1 Purpose and Area of Application...3 2 Packaging Requirements...4 2.1 General Packaging
More informationLogistics instructions
Framo Morat GmbH & Co. KG "Effective in competition" Our customers expect flexible and cost-effective logistics, which can meet the demands of the market from Framo Morat GmbH & Co. KG. Framo Morat GmbH
More informationLOGISTICS GUIDELINE. MAHLE Behr global
LOGISTICS GUIDELINE MAHLE Behr global Table of Contents 1 Objectives... 1 2 Information and Communication... 1 2.1 Availability of Contacts... 1 2.2 Reporting Obligation... 1 2.3 Electronic Data Interchange
More informationGeneral Packaging and Shipping Standards
General Packaging and Shipping Standards Valid from: 12/2017 Version: 1.2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany Table of Contents Page 1. Revision status.. 04 2. Scope... 05 3. Updates... 05
More informationFMP Group (Australia) Pty Ltd Supplier Packaging and Shipping Standard. Document No: PS13 Issue No: 05 Date: 2 July 2015
Supplier Packaging and Shipping Standard Document No: PS13 Issue No: 05 Date: 2 July 2015 Review date: 2 July 2016 INTRODUCTION The details in this document are intended to outline a minimum standard for
More informationPackaging and Shipping Instructions
Packaging and Shipping Instructions Process description Status: FR 01.04.2013 A. Meyer Page 1 / 14 300063400/OP1/001/03 Contents Packaging and Shipping Instructions 1. Introduction 3 2. Packaging 4 2.1
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationPackaging- and delivery-requirements Delivery addresses Hart bei Graz and Puntigam
Packaging- and delivery-requirements Delivery addresses Hart bei Graz and Puntigam Guideline 2013-02-05 1/7 Table of contents 1 Permitted load carriers 3 2 Total height and weight of one pallet 3 3 Pack
More information3.1 Managers of departments receiving goods, shipping departments, and distribution centres
Wooden packaging - Quality and requirements Definition of approved pallets, collars and bearers Document no GS 280A0018 Valid from 2010-03-26 Author GMAFLN Approver GMAKBE, GMACTB Doc. type Group Standard
More informationDelivery Instructions - Finished goods Leaflet for suppliers
Delivery Instructions - Finished goods Leaflet for suppliers This delivery instruction applies generally to all deliveries to the SITECO lighting systems in Traunreut (hereinafter referred to as Siteco)
More informationsheet packing line Customized sheet stacks add great value, since we can ship the required quantity directly to clients.
sheet packing line fully automatic sheet packing solutions Pesmel Sheet Packing Line protects sheets against moisture, dirt and damages. The key equipments in the line are longitudinal Steel Wrappers equipped
More informationDelivery Specification General Delivery Instruction
Contents Delivery Specification General Delivery Instruction 1.1 Aim and purpose...2 1.2 Scope of application...2 1.3 Delivery address and delivery time...2 2 Delivery documents...3 2.1 Delivery note...3
More informationIngram Micro Delivery Guidelines
1. Scope / Download information These delivery guidelines applies for all deliveries made by the supplier to Ingram Micro Distribution GmbH, Ingram Micro Pan Europe GmbH and Ingram Micro Mobility Germany
More informationSuppliers' Manual for Standardized Deliveries to Aspöck Systems GmbH
Suppliers' Manual for Standardized Deliveries to Aspöck Systems GmbH Erstellt/Geändert: JAR Geprüft: REW Freigegeben: SEB QW 092.00 Datum: 02.10.2018 Datum: 02.10.2018 Datum: 08.10.2018 Ausgabe: 04 1.
More informationVOLVO CAR CORPORATION
VOLVO CAR CORPORATION Application of Transport Labels for Batch deliveries Issue: 1 Date: 2017-09-15 Public VOLVO CAR CORPORATION Application of Transport Labels 2 (29) Table of Contents 1 Introduction...
More informationTerms and conditions of supply Main warehouse, Aachen
Terms and conditions of supply Main warehouse, Aachen Talbot Services GmbH c/o StreetScooter GmbH Central Warehouse Jülicher Straße 213-237 D-52070 Aachen hereafter referred to as "Streetscooter" 1. Scope
More informationLOGISTICS GUIDE. Guidelines and procedures relating to deliveries made to Indeks Retail.
LOGISTICS GUIDE Guidelines and procedures relating to deliveries made to Indeks Retail. Version: 2.5 Modified: 01/03-2018 By: PWI 1. Introduction... 3 2 Master data.... 4 2.1 Product master data.... 4
More informationLOGISTICS GUIDE. Version b English version
LOGISTICS GUIDE Version 2016-1b English version Contents Introduction... 3 2 Master data... 4 2.1 Dimensions of the goods... 4 2.2 Weight... 5 2.3 Packaging and palletisation... 5 2.4 Type of pallet...
More informationSUPPLIER PACKAGING MANUAL
November 2016 SUPPLIER PACKAGING MANUAL STACKPOLE INTERNATIONAL ENGINEERED PRODUCTS DIVISION NORTH AMERICA Table of Contents 1. Purpose... 2 2. Scope... 2 3. Procedure... 2 3.1 Supplier Responsibility...
More informationGNOTEC AB and its subsidiaries
LOGISTIC GUIDELINES GNOTEC AB and its subsidiaries 1/13 TABLE OF CONTENT 1. Objectives... 3 2. Associated elements... 3 3. Up-dates and revisions... 3 4. Format... 3 5. Document management... 3 6. OPERATIONAL
More informationSupplier Packaging Requirements
Supplier Packaging Requirements 1.0 Introduction Purpose To define Resorts World Sentosa s packaging and labeling requirements to suppliers. Scope This manual applies to all RWS suppliers shipping products
More informationthe ultimate guide to packaging your shipments
introduction Properly packaging your shipment is a critical step in the shipping process. Just one mistake can expose your shipment to costly and time-consuming damages. Not only do you need to use quality
More informationLOGISTICS GUIDE. Version d English version
LOGISTICS GUIDE Version 2016-1d English version Contents Introduction... 3 2 Master data... 4 2.1 Dimensions of the goods... 4 2.2 Weight... 5 2.3 Packaging and palletisation... 5 2.4 Type of pallet...
More informationLOGISTICS GUIDE. Version d English version
LOGISTICS GUIDE Version 2016-1d English version Contents Introduction... 3 2 Master data... 4 2.1 Dimensions of the goods... 4 2.2 Weight... 5 2.3 Packaging and palletisation... 5 2.4 Type of pallet...
More informationLOGISTICS GUIDE. Version d English version
LOGISTICS GUIDE Version 2016-1d English version Contents Introduction... 3 2 Master data... 4 2.1 Dimensions of the goods... 4 2.2 Weight... 5 2.3 Packaging and palletisation... 5 2.4 Type of pallet...
More informationPackaging manual for suppliers
1 1 / 10 Content Page 1 Introduction 2 1.1 Objective of the document. 2 2 General packaging conditions. 2 2.1 Supplier responsibility.. 2 2.2 Packaging data sheet.. 3 3 Standard packaging.. 4 3.1 Returnable
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationLogistics Guidelines
Logistics Guidelines for Suppliers A1 Telekom Austria AG Vers. 13. 11. 2015 Page 1 of 8 Table of Contents 1. Introduction 3 2. Master Data 3 3. Delivery Conditions 4 3.1. Applicability 4 3.2. Central Warehouse
More informationPESMEL SHEET PACKING LINE
PESMEL SHEET PACKING LINE Fully Automatic Sheet Packing Solutions Pesmel Sheet Packing Line is designed to protect metal sheets against moisture, dirt and damages. The key equipment in the line are Longitudinal
More informationShipping regulations
Shipping regulations of Miele & Cie. KG Carl-Miele-Platz 1 D- 59302 Oelde or Postfach (Post box) D- 59299 Oelde Version 2.3 (February 15, 2011) These shipping regulations are valid independent of the agreed
More informationBWI ODETTE CONTAINER LABEL REQUIREMENTS STANDARD
BWI ODETTE CONTAINER LABEL REQUIREMENTS STANDARD 1 VERSION 1.3 Aug 15 th, 2017 Revision history Release number Date of Release Comments 1.0 July 2010 Original version 1.1 July 2011 Supplier Reference changed
More informationGeneral Packaging & Transport Documentation for suppliers
c:\users\topala\desktop\abteilungen\disposition\allgemeine verpackungsverordnung_1708engl.docx General Packaging & Transport Documentation for suppliers State: Version valid from 01.08.2017 Table of Contents
More informationDelivery and packaging specifications. Edition: Replaces edition C:\Users\pcjd\AppData\Local\Microsoft\Windows\INetCache\Co
Delivery and packaging specifications FN 0100 Edition: 2018-09 Replaces edition 2011-10 C:\Users\pcjd\AppData\Local\Microsoft\Windows\INetCache\Co Page 1 of 12 ntent.outlook\offgglaw\fn0100_v042019_en.
More informationLOGISTICS GUIDELINE MAHLE Behr EUROPE incl. South Africa
LOGISTICS GUIDELINE MAHLE Behr EUROPE incl. South Africa Table of Content 1 Logistics Requirements...- 1-2 Delivery Concepts...- 2-3 Packaging...- 3-3.1 Packaging Requirements...- 3-3.1.1 Standard Dimensions...-
More informationSchedule production. Plan and prepare for a production. Allocation of total shelf life on a product
Schedule production Plan and prepare for a production This sub process describes the requirements, recommendations and guidelines STAND has, which may be relevant in planning and preparation for a production
More information2. Pallets 2.1 Pallet size x 1000 mm (Preferred size), One Way Pallet, Heat treatment according to ISPM 15
1. General Requirements 1.1 The below requirements on palletization, packaging and labelling apply to all shipments to UNICEF warehouse in Copenhagen. 1.2 Contractors who do not comply with the outlined
More informationSTAND009 STANDARD FOR OPTIMIZATION OF CONSUMER UNIT, D-PACK. Version 3.0. March 12. th SUPPLY CHAIN GETS MORE EFFICIENT
STANDARD FOR OPTIMIZATION OF CONSUMER UNIT, D-PACK (TRADING UNIT) AND PALLET IN THE NORWEGIAN GROCERY SECTOR Version 3.0 March 12. th. 2015 BY LIVING UP TO AT ALL LEVELS OF PACKAGING SUPPLY CHAIN GETS
More informationLogistics user manual for suppliers of MAN Diesel & Turbo SE
Logistics user manual for suppliers of MAN Diesel & Turbo SE MAN Diesel & Turbo SE 1 Table of contents 1 General... 4 1.1 Application areas... 4 1.2 Application scope... 4 1.3 Aims... 4 1.4 Responsibilities...
More informationGuidelines for the delivery of goods
Guidelines for the delivery of goods Introduction Dear Sir, Dear Madam, Together we move products and we ask for your cooperation. An experienced team, the required technology, and perfectly designed workflows
More informationAppendix 5: Location specific Shipping Instructions. Applicable to Tianjin site/ division I. Edition: Nov 09, 2017
Applicable to Tianjin site/ division I 1. Documentation required for incoming goods All documents (delivery note in duplicate, load carrier accompanying note, etc.) to be attached to the consignment note
More informationStandard Logistic Requirement Specification
Standard Logistic Requirement Specification For the HBPO Group worldwide Version 006-02/2017 [Source: www.hbpogroup.com] Page: 1 of 43 Version Date Author Remarks 001 07.02.2005 Anja Sprenger Michael Blochwitz
More informationSTANDARD OPERATING PROCEDURES MANUAL Material Planning & Logistics Futuris Automotive Interiors
STANDARD OPERATING PROCEDURES MANUAL Material Planning & Logistics Futuris Automotive Interiors [ Packaging Specifications for International Suppliers ] Version 1.0 [1] Copyright Futuris Automotive Interiors
More informationINSTRUCTIONS REGARDING DELIVERY OF GOODS TO THE KDG SITES ELBIGENALP, STANZACH, FÜSSEN
INSTRUCTIONS REGARDING DELIVERY OF GOODS TO THE KDG SITES ELBIGENALP, STANZACH, FÜSSEN Contents 0. Preliminary remarks 1 1. Delivery times 1 2. Accompanying documents 2 3. Pallet and package labelling
More informationDelivery Regulation. Delivery Policy for Companies of the HARTING Technology Group. HARTING Delivery Regulation Status:
Delivery Regulation Delivery Policy for Companies of the HARTING Technology Group 1 / 7 1. Introduction The present regulation applies to all suppliers of companies of HARTING-Technologiegruppe, hereinafter
More informationVehicle Control Systems An American Standard Company. Packaging and Labeling Requirements Manual for all suppliers
Vehicle Control Systems Packaging and Labeling Requirements Manual for all suppliers TABLE OF CONTENTS 1. INTRODUCTION... 3 1.1. SCOPE AND GENERAL MEANING... 3 1.2. REQUIREMENT... 3 1.3. PROBLEM RESOLUTION...
More informationGeneral information and how to order expendable packaging
ISSUER: VCC PACKAGING OPERATIONS VERSION: 7-07 General information and how to order expendable packaging Overview of common expendable packaging types equivalent/similar in size to VCC Standard Packaging
More informationVisteon Packaging Guidelines Shipping to Asia and Pacific. Released: 16/2/2015
Visteon Packaging Guidelines Shipping to Asia and Pacific Released: 16/2/2015 This specifics Guidelines are in additional to the Visteon Packaging Guidelines for Suppliers Generals Requirements. In cases
More informationPackaging Instructions and Terms of Delivery
Packaging Instructions and Terms of Delivery I. Packaging Instructions I. General These packaging instructions apply for all DOLMAR suppliers. The packaging should be chosen under ecological, economical
More informationTariff FCS Frankfurt Cargo Services GmbH
1. Import-Handling Import physical handling 0,135 18113 Truck-loading import ULDs ULD 10,50 22481 Truck-loading loose freight charge 22482 Truck-loading palletized freight charge /part /part 0,045 17,20
More informationSupplier Packaging Manual
This document outlines the base requirements expected by Pierburg to be followed by all suppliers. The information contained herein applies to all Pierburg and Pierburg Pump Technology plants. Mechatronics
More informationDHAHRAN MATERIALS & LOGISTICS DEPARTMENT TRAFFIC DIVISION GENERAL PACKING SPECIFICATION FOR SPARE PARTS
ISSUED BY: DHAHRAN MATERIALS & LOGISTICS DEPARTMENT TRAFFIC DIVISION MS 8314-10 ISSUE DATE REPLACES 05-2005 02-05 SUBJECT: SAUDI ARAMCO PACKING SPECIFICATIONS APPROVAL PAGE NUMBER 1 OF 6 GENERAL PACKING
More informationSupplier Packaging & Labelling Standards (direct materials)
Supplier Packaging & Labelling Standards (direct materials) Rev. 2.1 October 2011 de Mexico S.A. de C.V. Calle Jurica # 121, Parque Industrial Querétaro Santa Rosa Jauregui, Qro. C.P. 76220 Estado de Querétaro,
More informationPacking Slip, Packaging & Labeling Specification. 1.0 Supplier Responsibility
Packing Slip, Packaging & Labeling Specification 1.1 General Statements: 1.0 Supplier Responsibility 1.1.1 Packing Slips must meet Utilimaster s minimum requirements to assure timely receipt of material
More informationPACKAGING GUIDE FOR SHIPPERS CLAIMS-FREE SERVICE TAKES A TEAM EFFORT.
PACKAGING GUIDE FOR SHIPPERS CLAIMS-FREE SERVICE TAKES A TEAM EFFORT. How to properly package freight and prevent damage in transit In the LTL shipping environment, freight is transported across regions
More informationSTORAGE INSTRUCTIONS
PACKAGING HANDLING AND STORAGE INSTRUCTIONS FOR CRYSTALLINE SOLAR PV MODULES REVISIONS REV ECO/NPA DESCRIPTION OF CHANGE CHK D/DATE APP D/DATE A 07-2015 Revised the entire document Yuan HZ / Romain July
More informationLOGISTICS GUIDE. Guidelines and procedures relating to deliveries made to Indeks Retail.
LOGISTICS GUIDE Guidelines and procedures relating to deliveries made to Indeks Retail. Version: 2.2 Modified: October 20th, 2015 By: PWI 1. Introduction... 3 2. General... 4 2.1 Product master data....
More information2. Pallets 2.1 Pallet size x 1000 mm (Preferred size), One Way Pallet, Heat treatment according to ISPM 15
1. General Requirements 1.1 The below requirements on palletization, packaging and labelling apply to all shipments outside Copenhagen to UNICEF, UNICEF warehouses and non-unicef consignees. 1.2 For non-compliant
More informationPackaging. Well packaged, perfectly delivered
Packaging Well packaged, perfectly delivered The TNT Express packaging solutions TNT Express endeavours to deliver your parcels in perfect condition and on time. But you yourself can also contribute to
More informationFred Simmons CHANGE CONTROL SHEET
PerkinElmer, Inc. 68 Elm Street Hopkinton, MA 01748 Quality System Procedure Title: Originator: Procedure Fred Simmons 65256 PerkinElmer Generic Packaging Specification for Supplier Use CHANGE CONTROL
More information6.1 How the ECN should be handled Supplier evaluation SPM index Delivery performance index... 26
SUPPLIER MANUAL 2017 Table of Content 1. Introduction... 3 1.1. About this manual... 3 1.2. About Dynapac... 3 1.3. Dynapac in Karlskrona... 4 1.4. The Fayat Group... 4 2. The basics for business... 5
More informationApplicable to Passau site/ division I
Applicable to Passau site/ division I Edition: July 2018 1. Documentation required for incoming goods All documents (delivery note in duplicate, load carrier accompanying note, etc.) to be attached to
More informationDoing Business With Harley-Davidson, Packaging Original Equipment Manufacturing and Assembly Operations Last Update: July 2015
INTRODUCTION This document details the minimum acceptable packaging requirements for purchased components used at Harley-Davidson s Manufacturing and Assembly facilities. The principal objective of these
More informationGeneral Terms of Delivery
General Terms of Delivery Szaidel Cosmetic GmbH // Fabrikstraße 9 // 66892 Bruchmühlbach-Miesau Telefon +49 6372 9122-0 // Telefax +49 6372 9122-80 Rev.: 3/1/2017 1 Preamble: The following Terms of Delivery
More informationTariff FCS Frankfurt Cargo Services GmbH
1. Import-Handling Import physical handling 0,14 18113 Truck-loading import ULDs 1 ULD 10,80 22481 Truck-loading loose freight /part 0,047 22482 Truck-loading palletized freight /part 26598 Break down
More informationTariff FCS Frankfurt Cargo Services GmbH
1. Import-Handling Import physical handling 0,14 18113 Truck-loading import ULDs 1 ULD 10,80 22481 Truck-loading loose freight /part 0,047 17,80 22482 Truck-loading palletized freight /part 26598 Break
More informationNSK Steering Systems America
PAGE NO: 1 of 13 NSK Steering Systems America Supplier Logistics and Packaging Manual PAGE NO: 2 of 13 Table of Contents 1 Scope... 3 1.1 General... 3 2 Communication... 3 2.1 Supplier contacts... 3 2.2
More informationGeneral Packing and Shipping Instructions
General Packing and Shipping Instructions Table of Contents 1. SCOPE... 2 2. RECEIVING HOURS AND DIRECTIONS... 2 3. SHIPPING PAPERS... 3 4. LABELING... 3 5. PACKAGING... 4 5.2 HANDLING SYMBOLS... 5 5.3
More informationJohnson Matthey Emission Control Technologies. Site Specific Requirements. Johnson Matthey (Shanghai) Chemicals Ltd.
Johnson Matthey Emission Control Technologies Site Specific Requirements Johnson Matthey (Shanghai) Chemicals Ltd. Valid from: Mar.2016 The latest version of all documents associated with the Global Supplier
More information3.0 Delivery Complaint Consequences for Violation of this Guideline Document Revisions and Approvals... 27
Contents 1.0 Introduction... 4 1.1 Purpose & Scope of the Guideline... 4 1.2 Delivery Times & Points of Contact... 5 1.3 Data sheets and Test certificates... 6 2.0 Procedures... 6 2.1 Packaging Requirements...
More informationTechnical delivery conditions in general HB
CONTENT Area of application page 1 Quality specifications page 1 Feasibility page 1 Distinction page 2 Packing page 2 Quantity check page 2 Complaint page 2 Delivery page 2 Inserts page 3 Personalised
More informationDokumentenart/document type Prozess/Process Version Seite/page. Guideline S / 15
Guideline S1.8 04 1 / 15 Table of Contents 1 Introduction and General Requirements 1.1 Purpose and Scope 1.2 Contact Information 1.3 Communication 2 Logistic Requirements during the Pilot Phase 2.1 Deliveries
More informationMOTUS INTEGRATED TECHNOLOGIES SUPPLIER PACKAGING STANDARDS MANUAL
MOTUS INTEGRATED TECHNOLOGIES SUPPLIER PACKAGING STANDARDS MANUAL 1 TABLE OF CONTENTS Objective... 3 Responsibility of The Supplier... 3 Motus Packaging Data Sheet (PDS)... 4 Expendable Packaging Guidelines...
More informationWritten by: Lyndsay Flynn Date: 19 Sept 13 Approved by: Sarah Winslet Date: 19 Sept 13 Page 1
VCP JD Sports Fashion PLC T/A Blacks Account Numbers: 158575 / 158578 / 158579 / 158580 / 158581 Blacks Outdoor T/A Millets Account Number :168716 UK - MERRELL Requirements Revision #: 03 1. GENERAL REQUIREMENTS
More informationPackaging manual for the Liederbach central warehouse
for use when introducing new packaging and when modifying existing packaging Techem Energy Services GmbH Zentrallager Höchster Straße 80 D-65835 Liederbach hereinafter referred to as Techem Date: 16/01/2018
More informationThe standard Lean Logistics solution supplied by K.Hartwall Main product overview
The standard Lean Logistics solution supplied by K.Hartwall Main product overview 1 Corporate presentation May 2013 K.Hartwall Lean Dolly type I - Sizes: 600 x 400, 600 x 500, 24"x15" & 24 x22.5 - Two
More informationFinal Acceptance Criteria Standard for PV Modules-Final Module Assembly
Final Acceptance Criteria Standard for PV Modules-Final Module Assembly Developed by the Visual Acceptance Criteria for Solar Panel- Final Module Assembly Subcommittee (E-15) of the IPC PV Module Technical
More informationDHL Product specific assignment terms Domestic
PRODUCT SPECIFIC ASSIGNMENT TERMS 2. DEFINITIONS AND HEADERS 2.1 Definitions The sections in this document refer to the same sections in our terms and conditions; the DHL General Terms and Conditions.
More informationElectronic data transfer
Electronic data transfer Customer instructions for using electronic services 6.10.2015 Suomen Kaukokiito Oy 1 Contents Kaukokiito message communication... 2 Shipment freighting... 3 A unique waybill number
More informationBITZER KÜHLMASCHINENBAU GMBH ERSATZTEILLISTE BETRIEBSANLEITUNG. Contents. Page
SPARE OPERATING GENERAL PACKAGING PARTS INSTRUCTIONS LIST RULES ERSATZTEILLISTE BETRIEBSANLEITUNG BITZER KÜHLMASCHINENBAU GMBH LISTE INSTRUCTION BITZER DES KÜHLMASCHINENBAU PIÈCES DE SERVICE DÉTACHÉES
More information