American Architectural Manufacturers Association VOLUME 1 - WINDOWS AND DOORS
|
|
- Rodney Warren
- 6 years ago
- Views:
Transcription
1 VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors 101/I.S Voluntary Performance Specification for Windows, Skylights and Glass Doors Standard/Specification for Windows, Doors, and Unit Skylights North American Fenestration Standard/Specification for windows, doors, and skylights North American Fenestration Standard/Specification for windows, doors, and skylights User Guide to NAFS-11 North American Fenestration Standard/Specification for windows, doors, and skylights 101/I.S. 2/NAFS /I.S. 2/A /I.S. 2/A /I.S. 2/A IS2-A UG 101/I.S. 2/A Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior Profiles Voluntary Specification for Acrylonitrile-Butadiene-Styrene (ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends Voluntary Specification for Fiber Reinforced Thermoset Profiles Voluntary Specification for Laminates Intended for Use on AAMA Certified Profiles Voluntary Specification for Cellular Polyvinyl Chloride (PVC) Exterior Profiles Standard Specification for Classification of Rigid Thermoplastic/Cellulosic Composite Materials Voluntary Specifications for Reinforced Thermoplastic Fenestration Exterior Profile Extrusions Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles Voluntary Specification for Molded Aliphatic Polyurethane Elastomer Frame Materials General Guidelines for Troubleshooting Welded Thermoplastic Corners Voluntary Performance Rating Method for Mulled Fenestration Assemblies Voluntary Laboratory Test Method to Qualify Fenestration Installation Procedures Dry Shrinkage and Composite Performance Thermal Cycling Test Procedure (Editorially Revised) Voluntary Specifications for Impact and Cycle Testing of Fenestration Products Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems Installed in Commercial Buildings Voluntary Guide Specification for Blast Hazard Mitigation for Fenestration Systems Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware Voluntary Life Cycle Specifications and Test Methods for AW Class Architectural Windows and Doors Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM) Specification for Operating Cycle Performance of Side-Hinged Exterior Door Systems Specification for Determining the Vertical Loading Resistance of Side-Hinged Door Systems Voluntary Specification for Secondary Storm Products for Windows and Sliding Glass Doors
2 Voluntary Specification for Side-Hinged Secondary Storm Doors Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows Voluntary Specifications for Forced-Entry Resistant Aluminum Sliding Glass Doors Voluntary Specification for Forced Entry Resistance of Side-Hinged Door Systems Voluntary Standard for Thermal Performance of Windows, Doors and Glazed Wall Sections Voluntary Test Methods for Thermal Performance of Fenestration Products with Multiple Glazing Options Voluntary Test Method for Laboratory Heat Build-Up Effects on Fenestration Products Voluntary Standard for Utilization in Manufactured Housing for Primary Windows and Sliding Glass Doors *Voluntary Standard for Utilization in Manufactured Housing for Swinging Exterior Passage Doors *Voluntary Standard Egress Window Systems for Utilization in Manufactured Housing Voluntary Specifications for Residential Translucent Sloped Glazing Systems Specifications for Sunrooms (AAMA/NPEA/NSA) Voluntary Guideline for Engineering Analysis of Window and Sliding Glass Door Anchorage Systems Comparative Analysis Procedure for Window and Door Products Quality Assurance Processing & Monitoring Guide for Poured and Debridged Polyurethane Thermal QAG-1-09 Barriers Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers QAG-2-12 Fenestration Anchorage Guidelines TIR-A14-10 PART 3 - THERMAL AND ACOUSTICAL PERFORMANCE AND TESTS Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections Voluntary Specification for the Acoustical Rating of Windows, Doors, Skylights and Glazed Wall Sections PART 4 - FIELD TESTING METHODS Voluntary Specification for Field Testing of Newly Installed Fenestration Products Voluntary Guideline for Forensic Water Penetration Testing of Fenestration Products Voluntary Specifications for Tornado Hazard Mitigating Fenestration Products PART 5 - COATINGS AND FINISHES SPECIFICATIONS Cleaning and Maintenance Guide for Architecturally Finished Aluminum 609 & Voluntary Specification for Anodized Architectural Aluminum Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings a of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum (Editorially Revised) Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic a Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for High Performance a Organic Coatings on Plastic Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing a Organic Coatings on Plastic Profiles (Editorially Revised) Voluntary Specifications for High Performance Organic Coatings on Coil Coated Architectural Hot Dipped Galvanized (HDG) and Zinc-Aluminum Coated Steel Substrates Voluntary Specification, Performance Requirements and Test Procedures for Organic Coatings on a Fiber Reinforced Thermoset Profiles (Editorially Revised)
3 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Fiber Reinforced Thermoset Profiles(Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Exterior Stain Finishes on Wood, Cellulosic Composites and Fiber Reinforced Thermoset Window and Door Components Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes Voluntary Performance Requirements and Test Procedures for Organic Coatings on Wood and Cellulosic Composite Substrates Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels a a a a a PART 6 - HARDWARE, WEATHERSTRIP AND SEALANT SPECIFICATIONS Voluntary Specifications for Pile Weatherstriping & Replaceable Fenestration Weatherseals 701/ Voluntary Specifications for Non-Integral Door Bottom Weatherseals Voluntary Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products Voluntary Specification for Mechanically Attached Flexible Flashing Voluntary Test Method to Determine Chemical Compatibility of Sealants and Self-Adhered Flexible Flashings Voluntary Specification for Liquid Applied Flashing Used to Create a Water-Resistive Seal around Exterior Wall Openings in Buildings Voluntary Specifications and Test Methods for Sealants Voluntary Practice for Assessment of Single Component Aerosol Expanding Polyurethane Foams for Sealing Rough Openings of Fenestration Installations (2010) Voluntary Specification and Test Methods for Adhesives Used in Simulated Divided Lites Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls Voluntary Specification for Rotary & Linear Operators in Window Applications Voluntary Specification for Sash Balances Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side- Hinged Doors Voluntary Specification for Multi-Bar Hinges In Window Applications Voluntary Specification for Sliding Door and Lift and Slide Roller Assemblies Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components Voluntary Specification for Friction Based Sash Balances a Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware Voluntary Specification for the Water Penetration Resistance and Structural Load Performance of Locking/Latching Hardware Used in Side-Hinged Door Systems Airflow Through Integral Ventilating Systems/Devices TIR-A12-09
4 VOLUME 2 - METAL CURTAIN WALLS PART 1 METAL CURTAIN WALL MANUAL Metal Curtain Wall Manual MCWM-1-89 PART 2 TESTING Methods of Test for Exterior Walls Standard Test Method for Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts and Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System & Test Method for Thermal Cycling of Exterior Walls Recommended Static Test Method for Evaluating Windows, Window Wall, Curtain Wall and Storefront Systems Subjected to Vertical Inter-Story Movements Standard Test Method for Determination of Resistance to Human Impact of Window Systems Intended for Use in Psychiatric Applications Voluntary Specification for Field Testing of Newly Installed Metal Storefronts, Curtain Walls and Sloped Glazing Systems Standard Test Method for Static Loading and Impact on Exterior Shading Devices PART 3 ALUMINUM CURTAIN WALL DESIGN GUIDES Voluntary Test Method and Specification for Pressure Equalized Rain Screen Wall Cladding Systems Care and Handling of Architectural Aluminum from Shop to Site Design Wind Loads for Buildings and Boundary Layer Wind Tunnel Testing Structural Properties of Glass Structural Sealant Glazing Systems Aluminum Curtain Wall Design Guide Manual (Editorial Revision 5/05) The Rain Screen Principle and Pressure Equalized Wall Design Installation of Aluminum Curtain Walls Fire Safety in High-Rise Curtain Walls Glass and Glazing CW CW CW CW CW-DG-1-96 CW-RS-1-12 CWG-1-89 FSCOM-1-09 GAG-1-97 PART 4 TECHNICAL INFORMATION REPORTS Sound Control for Fenestration Products Structural Performance of Composite Thermal Barrier Framing Systems Design Guide for Metal Cladding Fasteners Maximum Allowable Deflection of Framing Systems for Building Cladding Components at Design Wind Loads TIR-A1-15 TIR-A8-16 TIR-A9-14 TIR-A11-15
5 VOLUME 3 - ALUMINUM STOREFRONT & ENTRANCE ALUMINUM STOREFRONT AND ENTRANCE MANUAL SFM-1-14 Section 1 - Terminology Part 1 Section 2 - Design Part 2 Section 3 - Hardware Part 3 Section 4 - Engineering Part 4 Section 5 - Specifications Part 5 Section 6 - References Part 6
6 VOLUME 4 - SKYLIGHT AND SPACE ENCLOSURES PART 1 - PERFORMANCE STANDARDS Voluntary Specification for Skylights (AAMA/WDMA) 1600/I.S PART 2 - DESIGN GUIDES Installation Guidelines for Unit Skylights Daylighting Design Guidelines for Roof Glazing in Atrium Spaces DDGA-89 Glass Design for Sloped Glazing GDSG-1-87 Structural Design Guidelines for Aluminum Framed Skylights SDGS-1-89 Skylight Handbook Design Guidelines SHDG-1-88 Two-Sided Structural Glazing Guidelines for Aluminum Framed Skylights TSGG-04 Sloped Glazing Guidelines PART 3 - TECHNICAL INFORMATION REPORTS TIR-A7-11
Section Sliding Aluminum Framed Glass Doors (2500 Model Specifications)
Section 083213 - Sliding Aluminum Framed Glass Doors (2500 Model Specifications) I. GENERAL: SECTION 083213 SLIDING ALUMINUM- FRAMED GLASS DOORS 1.01 Scope of Work A. Furnish all necessary materials, labor,
More informationWESTECK WINDOWS and DOORS
WESTECK WINDOWS and DOORS SECTION 08565 VINYL (PVC) PATIO DOOR GENERAL Supply PVC patio sliding doors as per approved Shop Drawings. PART 1 1.1 SECTION INCLUDES A. Patio sliding doors 1.2 RELATED SECTIONS
More informationSignature Series 5 Lap SECTION ALUMINUM WINDOWS
Signature Series 5 Lap SECTION 08 51 13 ALUMINUM WINDOWS PART 1 GENERAL 1.01 SUMMARY A. Related Documents: Conditions of the Contract, Division 1 - General Requirements, and Drawings apply to Work of this
More informationENERGY STAR Qualifying Criteria for Residential Windows, Doors, and Skylights Sold in Canada Version 3.0 October 1, 2010
ENERGY STAR Qualifying Criteria for Residential Windows, Doors, and Skylights Sold in Canada Below is the product criteria for ENERGY STAR qualified residential windows, doors, and skylights sold in Canada
More informationPage 1 PRODUCT DESCRIPTION PRODUCT FEATURES
2017-03-31 Page 1 DESCRIPTION PRODUCT FEATURES Extruded multi-chamber plastic sections, factory fabricated, vision glass, related flashings, anchorage and attachment devices. BASIC USES / RELATED USES
More informationCorium Brick Rainscreen System Specifications
CORIUM BRICK RAINSCREEN SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Work Included: The Work of this Section shall include but not be limited to the following: 1. Corium brick plates 2. Galvanized and coated
More informationSWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
More informationTEST REPORT. Rendered to: ALL WEATHER ARCHITECTURAL ALUMINUM Vacaville, California. SERIES/MODEL: 6000 PRODUCT TYPE: Aluminum Awning Window
TEST REPORT Report No.: D8932.01-301-44 Rendered to: ALL WEATHER ARCHITECTURAL ALUMINUM Vacaville, California SERIES/MODEL: 6000 PRODUCT TYPE: Aluminum Awning Window SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-08,
More informationVeka Evolutions Commercial Window Program
interior/exterior accessory grooves aluminum reinforcement galvanized steel reinforcement Veka Evolutions Commercial Window Program VEKA Inc. is proud to introduce the Evolutions line of commercially rated
More informationTMS 114 XT TECHNICAL MANUAL
TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES is center set flush glazed systems that are 4 1/2" deep with a 2" wide sightline Glaze from the outside or inside Screw spline or shear block fabrication Glazing
More informationANSI/AAMA/NWWDA 101/I.S.2-97 TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.
ANSI/AAMA/NWWDA 101/I.S.2-97 TEST REPORT Rendered to: MASTER WINDOW SYSTEMS, INC. SERIES/MODEL: Master 1000 Sliding Window PRODUCT: PVC Horizontal Sliding Window Summary of Results Title Test Specimen
More informationSeries 510-I Thermal Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510-I Thermal 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Fixed Series 510-I retains an AAMA Architectural
More informationCentral Dartmouth Section Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Dartmouth, NS
Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Part 1 General 1. RELATED SECTIONS 1. Section 07 92 10 Joint Sealing 2. Section 08 71 00 Door Hardware 2. REFERENCES 1. American Society
More informationSeries Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Pivot Top-Hinged Fixed Series 510 retains an AAMA Architectural
More informationArchitectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION Section 08520 Aluminum Windows PART 1: WORK INCLUDED A. The conditions of the contract and applicable sections of Division
More informationPRODUCT SPECIFICATION SERIES 9000 WINDOW WALL THERMALLY BROKEN ALUMINUM CASEMENT / AWNING / FIXED WINDOW
08 46 3 GLAZED ALUMINUM WINDOW WALL PART - GENERAL A high-quality thermally broken 4 ½ aluminum window wall designed for residential high rise construction.. SUMMARY A. Section Includes: Glazed Aluminum
More informationSeries 660 Single Hung * Series 670 Double Hung Series 6600 Fixed ** Heavy Commercial Hung Thermal Window
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BLAST GRADE Series 660 Single Hung * Series 670 Double Hung Series 6600 Fixed ** 3 7 8 Heavy Commercial Hung Thermal Window
More informationTMS 152 / 152T / 152XT TECHNICAL MANUAL
TMS 152 / 152T / 152XT TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES TMS 152 (non-thermal), 152T (single thermal barrier), and 152XT (double thermal barrier) are front set flush glazed systems that are
More informationField Determination of Water Penetration of Windows using Blowerdoor and Infrared Camera
Field Determination of Water Penetration of Windows using Blowerdoor and Infrared Camera Walter Sebastian BMT Building Enviroment Consultants Ltd., Doktor Neergaards Vej 15, DK-2970 Hoersholm, Denmark
More informationT700 SERIES(AW50)-Impact (Formerly 8050 series) SINGLE HUNG 3 1/4 FRAME DEPTH (SIDE LOAD)
T700 SERIES(AW50)-Impact (Formerly 8050 series) SINGLE HUNG 3 1/4 FRAME DEPTH (SIDE LOAD) FEATURES 1.) Available Configurations -Single hung -Oriel style (optional) 2.) Main frame / Sash -Drop-in glazing
More informationSECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM
PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.
More informationColumbia Skylights may qualify your project for LEED points in the following categories: Columbia Skylights - Potential Contribution to LEED projects
3.0 Statement Columbia Skylights Statement for New Construction (NC) Version 3.0 Credit Documentation The Leadership in Energy and Environmental Design () Green Building Rating System promotes the adoption
More informationPW251 21/2 x7 GUIDE SPECIFICATION. Curtain Wall
Manufacturer: Coral Architectural Products 3010 Rice Mine Road Tuscaloosa, AL. 35406 Voice: (800) 772-7737 Fax: (800) 443-6261 SECTION 08900 ALUMINUM CURTAIN WALL This suggested guide specification has
More informationExceed Your Expectations Today And Well Into the Future.
Exceed Your Expectations Today And Well Into the Future. Advanced Thermal Performance Vinyl Window & Patio Door System The EnergyQuest window and patio door system from Quanex takes your replacement program
More informationAQUARIUS CONDOMINIUM 40 YEAR RESTORATION PROJECT & RELATED WORK. Wind Pressure Drawings: Openings, Specs, NOA s / Product Approvals
AQUARIUS CONDOMINIUM 2751 SOUTH OCEAN DRIVE HOLLYWOOD, FLORIDA 33019 40 YEAR RESTORATION PROJECT & RELATED WORK Wind Pressure Drawings: Openings, Specs, NOA s / Product Approvals ENGINEER S PROJECT # 7478-16
More informationVELUX America Inc. SPECIFICATION FOR MODEL FS NO LEAK FIXED SKYLIGHT SECTION UNIT SKYLIGHTS
SECTION 08620 UNIT SKYLIGHTS PART 1 GENERAL 1.01 SECTION INCLUDES A. Performance and product component information for VELUX FS fixed deck mount skylight. B. VELUX Skylight Adhesive Underlayment provided
More information7520 Casement Windows
Full casement Single casement Double-bottom casement Double casement FULL DOUBLE CASEMENT - Min 1 9 1 6 Max 3 0 5 0 or 2 6 6 0 CASEMENT W/ PICTURE - Min 4 6 1 6 Max 12 0 6 0 with 30 vent set - Minimum
More informationGUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
More informationVELUX America Inc. SPECIFICATION FOR MODEL VS and VSE NO LEAK VENTILATING SKYLIGHT SECTION UNIT SKYLIGHTS
NO LEAK VENTILATING SKYLIGHT SECTION 08620 UNIT SKYLIGHTS PART 1 GENERAL 1.01 SECTION INCLUDES A. Performance and product component information for VELUX top hinged [VSE electric deck mount venting skylight]
More informationDIVISION 8 OPENINGS SECTION ALUMINUM WINDOWS
DIVISION 8 OPENINGS SECTION 08 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSL35 Introduction. NanaWall SL35 The Standard Aluminum Framed Folding System
SL35 Introduction NanaWall SL35 The Standard Aluminum Framed Folding System The SL35 is an aluminum folding panel system designed to provide a moving glass wall for openings as wide as 39. It is a top-hung
More informationAQUARIUS CONDOMINIUM 40 YEAR RESTORATION PROJECT & RELATED WORK. Wind Pressure Drawings: Openings, Specs, NOA s / Product Approvals
AQUARIUS CONDOMINIUM 2751 SOUTH OCEAN DRIVE HOLLYWOOD, FLORIDA 33019 40 YEAR RESTORATION PROJECT & RELATED WORK Wind Pressure Drawings: Openings, Specs, NOA s / Product Approvals ENGINEER S PROJECT # 7478-16
More informationFundamentals of Door Installation START
Fundamentals of Door Installation START Course Description This program provides a general overview of best-practice installation procedures for wood and clad/wood doors, including a discussion on opening
More informationAlpen High Performance Products
6268 Monarch Park Place Longmont, CO 80503 Phone: (800) 882-4466 Phone: (303) 834-3600 Fax: (303) 834-3541 www.thinkalpen.com 3-Part Guide Specification GENERAL NOTES TO SPECIFIER: THIS SPECIFICATION SYSTEM
More informationPROJECT LOCATION SECTION COPPER METAL PLATE WALL PANELS
SECTION 07 4213.25 PART 1- GENERAL 1.01 SECTION INCLUDES A. Copper metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.
More informationNanaWall Matching Windows and Doors Table of Contents
NanaWall Matching Windows and Doors Table of Contents Matching Windows and Doors Cross Sections and Maximum Frame Charts Introduction.............................................................. 1 NanaWall
More informationEuroView. Commercial Windows and Doors
EuroView Commercial Windows and Doors EuroView Commercial Windows and Doors The EuroView is a commercial grade window and door system that utilizes all the benefits of PVC to satisfy the acoustic, thermal,
More informationGUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
More informationImpact-Resistant Windows and Doors. impact-resistant package
Impact-Resistant Windows and Doors impact-resistant package impact-resistant package Repels in the harshest conditions Once a home s windows are breached, internal pressure can build up, blowing off the
More informationVinyl Windows and Doors
Install Atrium 0UZ[PSS *VUÄKLUJL Vinyl Windows and Doors Atrium Vinyl Windows A Commitment to Excellence Since 1948 Welcome the beauty of The Vinyl Advantage Vinyl is the ideal material for engineering
More informationCasement Windows Montecito New Construction Window
Casement Windows Montecito New Construction Window Full casement Double-bottom casement FULL DOUBLE/SINGLE DOUBLE CASEMENT - Min 1 6 1 0 Max 3 0 5 0 or 2 6 6 0 CASEMENT - Min 3 0 1 6 Max 6 0 5 0 or 5 0
More informationThe Aluminum Framed Monumental Folding/Paired Panel System
INTRODUCTION SL45 The Aluminum Framed Monumental Folding/Paired Panel System The SL45 is a monumental, standard aluminum folding or paired panel system. As a folding system, it is designed to provide an
More informationSeries 3500 Thermal Series 3900 Fixed Thermal Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3500 Thermal Series 3900 Fixed Thermal 3 1 4 rchitectural Grade Horizontal Sliding Window Configurations X X XX X XX Fixed Series 3500 retains an M rchitectural
More informationEn e r g e x El i t e Window Systems
En e r g e x El i t e Window Systems Style, beauty & comfort united with versatility and advanced performance En e r g e x El i t e INNOVATION WITHOUT COMPROMISE Energex Elite represents a bold, new, highly
More informationFenestration Energy Performance:
number 9 Builder Insight Fenestration Energy Performance: A Roadmap for Understanding Requirements for Residential Buildings in British Columbia Overview Energy performance requirements for windows, doors
More information3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows
3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows 3000 SERIES FIBERGLASS - Min 1 6 2 9 Max 4 0 7 0 - Min 3 0 2 9 Max 8 0 7 0 Double-Hung Double Double-Hung - Min 4 6 2 9 Max 12 0 7 0 Minimum
More informationDesignation: TTU NWI DIF Air Bladder Standard Scope
Designation: TTU NWI DIF Air Bladder Standard 1.1.2016 Standard Test Method for Structural Performance of Exterior Doors, Windows, Curtain Walls, and Skylights by Uniform Static Air Pressure Difference
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationAwning Windows Montecito New Construction Window
Awning Windows Montecito New Construction Window Full awning Double-top awning Double awning Double-bottom awning FULL DOUBLE BOTTOM/TOP DOUBLE AWNING - Min 1 3 1 4 Max 4 6 3 0 AWNING - Min 3 0 1 6 Max
More informationNew Construction Windows and Doors
New Construction Windows and Doors A Better Experience We re so much more than windows OUR MISSION: GETTING IT RIGHT EVERY TIME As one of the nation s largest suppliers of high-quality windows for newly
More informationMAKE ROOFS LAST LONGER
MAKE ROOFS LAST LONGER Roof Coatings & Roof Repair Single-Ply Metal Asphalt HIGHEST PERFORMING SYSTEMS. LOWEST APPLIED COST. METAL ROOF RESTORATION Metal Restoration Quick Guide Acrylic Polyurethane High
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationVINYL CLASSICS NORTHERN CLASSICS
Hayfield VC&NC brochure 2-2012.5_Layout 1 4/16/12 11:35 AM Page 1 window & door co VINYL CLASSICS NORTHERN CLASSICS WWW.HAYFIELDWINDOWS.COM HAYFIELD, MN 55940 Hayfield VC&NC brochure 2-2012.5_Layout 1
More informationGuideline Specifications
Page 1 of 7 PART 1 Guideline Specifications Exterior Aluminum/Composite Wall Panels GENERAL ARROWHEAD 508 SYSTEM Pressure Equalized Rainscreen SECTION 07410 1.01 SUMMARY A. Work of this section included
More informationCode Requirements For Residential Windows & Doors
International NEW 2016 EDITION! Code Requirements For Residential Windows & Doors Courtesy of the American Architectural Manufacturers Association The family of International Codes published by the International
More informationupvc ENERGY EFFICIENT WINDOWS AND DOORS
CPD seminar: upvc windows and doors upvc ENERGY EFFICIENT WINDOWS AND DOORS www.rehau.co.za Building Solutions Automotive Industry Contents - upvc profile extrusion - Specifying window and door systems
More informationLift & Slide door installation instructions
Lift & Slide door installation instructions Installer and Builder Information * Always provide a copy of these instructions for the current or future building owner. WARNING: * If your abilities do not
More information1.2.1 Section Cold-Formed Metal Framing: Metal framing for support of aluminum soffits.
1 GENERAL 1.1 SECTION INCLUDES 1.1.1.1 Aluminum Siding. 1.1.1.2 Aluminum Soffits. 1.1.1.3 Thermally Broken Façade Sub-structure. 1.1.1.4 Aluminum trim and accessories. 1.2 RELATED SECTIONS 1.2.1 Section
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationLouis Armstrong New Orleans International Airport NOAB Project # North Terminal Development Program Phase 1
Louis Armstrong New Orleans International Airport NOAB Project # 8910-01233 PART 1 - GENERAL SECTION 07 71 29 - MANUFACTURED ROOF EXPANSION JOINTS 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationNOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer)
NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION MASTERFORMAT SECTION 04818 (Mortarless Concrete Brick Veneer) Spec_USA_En_18102005.doc 12/1/2005 Novabrik Page 2 Section 04818 NOVABRIK MORTARLESS
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More informationby Rollfab Metal Products
by Rollfab Metal Products SECTION 07460 ALUMINUM SIDING AND SOFFITS PART 1 GENERAL 1.2 RELATED SECTIONS 1.3 REFERENCES A. SECTION INCLUDES B. Aluminum Siding. C. Aluminum Soffits. D. Aluminum trim and
More informationAN ARCHITECT S GUIDE TO NAFS USING THE NORTH AMERICAN FENESTRATION STANDARD IN CANADA
AN ARCHITECT S GUIDE TO NAFS USING THE NORTH AMERICAN FENESTRATION STANDARD IN CANADA MAY 2017 Al Jaugelis, B.Sc.Arch. The material provided in this guide is for information and suggestion only. The greatest
More informationSECTION DIRECTORIES
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 13 00 DIRECTORIES SPEC WRITER NOTES: 1. Delete // // if not applicable to project. Also delete any other item or paragraph not applicable in the section and
More informationP RESIDENTIAL SERIES
P RESIDENTIAL SERIES CLASSIC STYLE. HIGH PERFORMANCE FEATURES. ENDLESS OPTIONS. When choosing to replace the windows and doors in your home there are many points to consider. The Presidential Series Window
More informationPROJECT LOCATION SECTION ZINC ALLOY METAL PLATE WALL PANELS
SECTION 07 42 13.26 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Zinc alloy metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.
More informationEngineered Specifically for New Construction Applications
Engineered Specifically for New Construction Applications WINDOW CORP. An American Building Tradition Since 1955. Lockheed Window Corp. Knows New Construction We know and understand the needs of builders
More informationAlply CLASSIC WALL Architectural Insulated Panel Wall System
SECTION 07 42 13 INSULATED METAL WALL PANELS ALPLY Insulated Panels Alply CLASSIC WALL Architectural Insulated Panel Wall System PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Smooth, non-embossed steel, insulated
More informationBuilding Envelope Systems Exam Learning Objectives
Building Envelope Systems Exam Learning Objectives Roofing Nomenclature 1. Define the following roofing terms: low, flat, sloped, conventional, protected/inverted, hybrid, BUR, modified bitumen, PVC, TPO,
More informationEFFECTIVE JULY, 2010 TRIFAB VG 451/451T 1 EC ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS Guide Specs
EFFECTIVE JULY, 2010 TRIFAB VG 451/451T 1 EC 97909-19 08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS Guide Specs SECTION 084113 - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 - GENERAL 1.1 RELATED
More informationA guide to Azon energy-saving technology. thermal barriers for high performance commercial fenestration
A guide to Azon energy-saving technology thermal barriers for high performance commercial fenestration DYNAMIC MIXER Azon 1 Azon 2 Azon structural thermal barrier technology How the pour and debridge process
More informationHomeMaker3 Windows and Doors
HomeMaker3 Windows and Doors A Better Experience We re so much more than windows OUR MISSION: GETTING IT RIGHT EVERY TIME As one of the nation s largest suppliers of high-quality windows for existing and
More informationCRITERIA FOR TESTING IMPACT & NON IMPACT RESISTANT BUILDING ENVELOPE COMPONENTS USING UNIFORM STATIC AIR PRESSURE
TESTING APPLICATION STANDARD (TAS) 202-94 CRITERIA FOR TESTING IMPACT & NON IMPACT RESISTANT BUILDING ENVELOPE COMPONENTS USING UNIFORM STATIC AIR PRESSURE 1. Scope 1.1 This protocol covers procedures
More informationAluminum Impacts Design Manual And Application Guide
Aluminum Impacts Design Manual And Application Guide Aluminum impacts and impact extrusions. Search: HOME / Brass Rod / Forgings / Solution: The best aluminum impact extrusion design was created for the
More informationFRENCH DOOR VINYL SERIES 455 / 555
FRENCH DOOR VINYL SERIES 455 / 555 A NEW GENERATION FRENCH DOOR French doors add a luxurious and open aspect to any home, allowing sunlight to fill a room and broaden your horizon. PGT s new Vinyl Series
More informationSECTION Structured Polycarbonate Panel Assemblies. Series 3500 BPC System with 40mm Tongue and Groove
Duo-Gard Industries Inc. 40442 Koppernick Road Canton, Michigan 48187 Phone (734) 207-9700 Fax (734) 207-7995 www.duo-gard.com SECTION 08 45 13 Structured Polycarbonate Panel Assemblies Series 3500 BPC
More informationSliding Patio Doors Brickmould Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/8 Scale 2-WideSlidingPatioDoors... 7-4 GlazingOptions: 3 Scale... 7-5 Grille Patterns... 7-6 SectionDetails: 6 Scale...
More informationDIVISION 8 DOORS AND WINDOWS
DIVISION 8 DOORS AND WINDOWS BUSHEY FEIGHT MORIN ARCHITECTS INC. 473 NORTH POTOMAC STREET HAGERSTOWN, MARYLAND 21740 301-733-5600 FAX: 301-733-5612 SECTION 08110 - STEEL DOORS AND FRAMES PART 1 GENERAL
More informationA FOLDING DOOR SERIES BY ROYAL
A FOLDING DOOR SERIES BY ROYAL The perfect space solution Overture in music is the term originally applied to the instrumental introduction to an opera. During the early Romantic era, composers such as
More informationCustom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ask us how Ramco can now fabricate hardware on all manufacturers blank doors in 2 weeks or less. ramcometals.com got lead times? Ramco offers custom
More informationTRIFAB FRAMING SYSTEMS AND STOREFRONT FRAMING SYSTEMS ALUMINUM STOREFRONT FRAMING SYSTEMS
ENVIRONMENTAL PRODUCT DECLARATION TRIFAB FRAMING SYSTEMS AND STOREFRONT FRAMING SYSTEMS ALUMINUM STOREFRONT FRAMING SYSTEMS Kawneer Company, Inc., part of Arconic's global Building and Construction Systems
More informationHow do you install yours?
How do you install yours? Darrell Paul Qualistat Building Performance Consultants CSA 440 Just about adding Peel & Stick? 1 Window and door problems Photos / videos Video available for viewing at INSTAGRAM
More informationU-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report
U-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report REPORT NO: SIMULATION DATE: 5/25/2016 REPORT DATE: 6/2/2016 Client: Product Line: Specification:
More informationBEARING METAL STUD FRAMING
L-1 Section 05410 Long Form Specification LOAD BEARING METAL STUD FRAMING This section includes axially loaded steel studs, with unique slotted top channels, usually of 0.91, 1.2 and 1.5 mm (16, 18, or
More informationGuide Specifications. Metl-Span Architectural Insulated Metal Panel For Commercial & Industrial Buildings PART 1 GENERAL
Guide Specifications 2012 Master Format Section 07 42 13.19 Metl-Span Architectural Insulated Metal Panel For Commercial & Industrial Buildings PART 1 GENERAL 1.1 Work Included A. Pre-insulated metal panel
More informationSECTION METAL BUILDING SYSTEMS
SECTION 13 3419 PART 1 GENERAL 1.01 SECTION INCLUDES A. Manufacturer-engineered, shop-fabricated structural steel building frame. B. Insulated Metal wall and roof panels including gutters and downspouts.
More informationYES SSG TU Vent Window System
YES SSG TU VENT SYSTEM DESCRIPTION 3-1/2" Overall Depth Flat and Pocket Frame Options Variations: Casement Outswing Projected Outswing 1" Glazing Optional Screens YES SSG TU VENT PERFORMANCE FEATURES AAMA/WDMA/CSA
More informationVINYL SINGLE HUNG WINDOW
600 800.475.506 gerkin.com 600 Decades Of Proven Performance The Comfort Series model 600 single hung is a new generation window for Gerkin! After decades of proven performance with our single hung, we
More informationCENTRIA FORMABOND II Metal Composite Wall System
CENTRIA FORMABOND II Metal Composite Wall System CENTRIA FormaBond II is the only true metal composite panel wall system designed, manufactured and fabricated by a single, reliable national manufacturer
More informationThe Alternative to Storefront. Gerkin Model 58F
The Alternative to Storefront Gerkin Model 58F Why do we need an alternative? To provide windows with factory glazing To eliminate water leaks To eliminate the need for sill flashing w/ end dams To reduce
More informationPRODUCT DESCRIPTION Titan / Tritan 6500 Series
BASIC USES PRODUCT DESCRIPTION Titan / Tritan 6500 Series PRODUCT FEATURES Windows for residential and light commercial applications. PRODUCT ATTRIBUTES AND CHARACTERISTICS Extruded PVC multi-chamber frame
More informationPROJECT LOCATION SECTION TEXTURED METAL PLATE WALL PANELS
SECTION 07 4213.29 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Textured, aluminum metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support
More informationWINDOW SELECTION for Sustainability and Long-Term Performance. (A Wausau AIA-CES Presentation)
WINDOW SELECTION for Sustainability and Long-Term Performance (A Wausau AIA-CES Presentation) PROGRAM SPECIFICS WINDOW SELECTION for Sustainability and Long-Term Performance (A Wausau AIA-CES Presentation)
More informationSpecifying Windows and Doors Using Performance Standards
1 Specifying Windows and Doors Using Performance Standards 2 This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or
More informationThe Role of Control Layers in Building Enclosure Design
The Role of Control Layers in Building Enclosure Design COLIN SHANE M.ENG., P.ENG. ASSOCIATE, SENIOR PROJECT MANAGER OCTOBER 13, 2016 Disclaimer: This presentation was developed by a third party and is
More informationSECTION COPPER WALL PANELS. ***This section has been updated to IBC. Verify for specific project conditions.***
***This section has been updated to IBC. Verify for specific project conditions.*** PART 1 GENERAL 1.1 SUMMARY ***Edit to project requirements*** A. Section Includes: 1. Clear copper and preweathered copper
More informationNOTE TO SPECIFIER: This section is based on the products of Solar Innovations, Inc., which is located at:
SECTION # 083213 G3 LIFT SLIDE SYSTEM BY SOLAR INNOVATIONS, INC. NOTE TO SPECIFIER: This section is based on the products of Solar Innovations, Inc., which is located at: 31 Roberts Road Pine Grove, PA
More informationMasters Grande Series Windows with a Masterful Blend of Style, Design & Energy Efficiency
Masters Grande Series Windows with a Masterful Blend of Style, Design & Energy Efficiency Amerimax is Committed to Green and Lean Manufacturing The Amerimax commitment to energy conservation began in 1986
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (562) 699 0543 www.icc es.org ESR 3152 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00 00
More information