Conduit and Accessories. The Ultimate in Corrosion Protection! Nominal Wall Thickness. Nominal Wall Thickness. in. (mm)
|
|
- Melvin Horn
- 6 years ago
- Views:
Transcription
1 The Ultimate in Corrosion Protection! OCAL-BLUE TM Conduit Hot-dip galvanized steel or aluminum conduit Nominal 0.00 in. ( mils) blue urethane coating on interior Hot-dipped galvanized threads (steel) Minimum 0.00 in. (0 mils) PVC coating on exterior Colour-coded thread protectors Couplings shipped with conduit are packaged separately Steel COND/-_ COND/-_ COND-_ COND-/-_ COND-/-_ COND-_ COND-_ COND-_ COND-_ COND-_ *COND-_ *COND-_ Aluminum COND/SA-_ COND/SA-_ CONDSA-_ COND-/SA-_ COND-/SA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ Metric size designator (ANSI C80.-99). * culus Listed. Pipe Size in. (mm) / () / () (7) -/ () -/ () () () (9) (0) (9) () Outside Diameter 0.8 (.0).0 (.70). (.0). (.0).90 (8.0).8 (0.0).88 (7.00).0 (88.90).00 (0.0).0 (.0). (.0). (8.0) Outside Diameter With PVC 0.9 (.0). (8.70).0 (.0).7 (.0).98 (0.0). (.0).9 (7.00).8 (90.90).08 (0.0).8 (.0). (.0).7 (70.0) Nominal Wall Thickness 0.0 (.) 0. (.7) 0. (.0) 0. (.7) 0. (.0) 0. (.70) 0.9 (.90) 0. (.0) 0. (.) 0. (.7) 0. (.) 0.7 (.7) Nominal Wall Thickness With PVC 0. (.).7 (.7) 0.7 (.) 0.7 (.9) 0.8 (.) 0.9 (.7) 0. (.9) 0. (.) 0. (.7) 0.7 (.7) 0.9 (7.) 0. (7.87) Nominal Inside Diameter 0. (.0) 0.8 (.0).0 (7.00).9 (.0). (.0).08 (.90).9 (.0).09 (78.0).7 (90.70).0 (0.90).07 (8.90).09 (.80) Cross Section Area in Square 0.0 (7.7) 0. (.) 0.8 (.9).0 (7.97).0 (.7). (8.).80 (.) 7.9 (87.80) 9.87 (0.0).7 (.) 0.0 (08.) 8.89 (7.8) Length Without Couplings ft. (m) 9 -/ (.0) 9 -/ (.0) 9 (.0) 9 (.0) 9 (.0) 9 (.0) 9 0-/ (.0) 9 0-/ (.0) 9 0-/ (.00) 9 0-/ (.00) 9 0 (.00) 9 0 (.00) Size Material Colour Minimum Weight Per Foot lb. (KG) 0.79 (.8).0 (7.). (9.0).0 (9.7).0 (.9). (0.0).7 (9.0).8 (09.) 8. (7.9) 9.7 (.0). (9.8) 7. (79.7) COND / _- _ = space for colour identifier Blank = Steel SA = Aluminum COND/-G is / in. steel conduit coated in grey PVC. R = Red H8
2 Corrosion-Protected Connections for Conduit Sections OCAL-BLUE TM Couplings Nominal 0.00 in. ( mils) blue urethane coating on interior and threads Minimum 0.00 in. (0 mils) PVC coating bonded to exterior Couplings have straight threads (NPS), not tapered Molded ribs on outer coating for easy installation (up to and including in. trade size) Couplings have pressure-sealing sleeves to protect your connection Steel CPL/-_ CPL/-_ CPL-_ CPL-/-_ CPL-/-_ CPL-_ CPL-_ CPL-_ CPL-_ CPL-_ *CPL-_ *CPL-_ CPL/SA-_ CPL/SA-_ CPLSA-_ Aluminum CPL-/SA- CPL-/SA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ Metric size designator (ANSI C80.-99). *Not CSA certified. Coupling Size / () / () (7) -/ () -/ () () () (9) (0) (9) () Minimum Length of Metal.0 (8.0). (8.9).9 (8.).9 (8.).9 (8.).9 (9.9).88 (7.0).0 (7.98).09 (78.8).9 (80.97).7 (8.9). (87.9) Total Minimum Length Including Sleeve.7 (9.).7 (9.).9 (9.70).0 (9.70).7 (.0).9 (0.79).88 (7.70) 7.0 (78.8) 7.09 (80.8) 7.9 (8.7) 7.7 (87.9) 7. (88.89) Size Material Colour Weight lb./kg 0. (0.) 0.9 (0.8) 0. (0.) 0. (.9) 0. (.) 0.77 (.).8 (.8).70 (.).78 (.70).08 (.9).00 (.) 8.00 (.0) CPL / SA- _ = space for colour identifier Blank = Steel SA = Aluminum CPLSA-B is in. aluminum coupling coated in blue PVC. R = Red H9
3 OCAL-BLUE TM Double-Coat Split Couplings Split couplings serve as speed unions for cost-effective joining of two separate lengths of threaded conduit. Like other Ocal TM fittings, they re double coated in urethane and PVC to safeguard your entire conduit system against corrosion. Malleable iron construction Nominal 0.00 in. ( mils) blue urethane on both interior and exterior Minimum 0.00 in. (0 mils) PVC bonded to exterior Stainless steel hardware included Join Threaded Conduit Where You Can t Use a Standard Coupling TCC- Colour _ = space for colour identifier R = Red _ NOTE The use of standard couplings is recommended whenever possible over the use of split couplings, because standard couplings provide better overall corrosion protection. TCC-_ / () TCC-_ / () TCC-_ (7) TCC-_ -/ () TCC-_ -/ () TCC-_ () Metric size designator (ANSI C80.-99). * Not CSA certified. TCC7-_ TCC8-_ TCC9-_ TCC0-_ *TCC-_ *TCC-_ () (9) (0) (9) () Speed Up Your Field Installations with Pre-Threaded Conduit Nipples! OCAL-BLUE TM Nipples Made from Ocal TM PVC-coated steel or aluminum conduit urethane coating over threads Nominal 0.00 in. ( mils) blue urethane on interior Minimum 0.00 in. (0 mils) PVC coating on exterior Colour-coded thread protectors for easy identification of conduit size Available in standard lengths close and in. to in. with custom lengths available on request Close nipples are coated only in urethane Size X Lengh Material Colour NPL / X _- _ = space for colour identifier Blank = Steel SA = Aluminum NPL/X-G is / in. x in. long steel nipple coated in grey PVC. R = Red H0
4 OCAL-BLUE TM NIPPLES (cont d) PVC-Coated Conduit Nipples Steel / () / () (7) -/ () -/ () () () (9) (0) * (9) * () Close (0.8) (.) (7.) (88.9) Nipple Length (0.) (7.0) (.) 8 (0.) 0 (.0) CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX-_ NPLX/-_ NPLX-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ (0.8) CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX/-_ NPLX-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL/-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X -_ CLNPL-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ PVC-Coated Conduit Nipples Aluminum / () / () (7) -/ () -/ () () () (9) (0) * (9) * () Close (0.8) (.) (7.) (88.9) Nipple Length (0.) (7.0) (.) 8 (0.) 0 (.0) (0.8) CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLX/SA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLX/SA-_ NPL/XSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ Metric size designator (ANSI C80.-99). * Not CSA certified. H
5 Factory Bent to Save Time and Materials! OCAL-BLUE TM Standard-Radius Elbows Fabricated from Ocal TM PVC-coated conduit Standard radius is 90, and is available for immediate shipment Colour-coded thread protectors for easy identification of conduit size Special radius and degrees (0, and 0 ) not listed are also available upon request 90 Standard-Radius Elbows ELL/-_-_ ELL/-_-_ ELL-_-_ ELL-/-_-_ ELL-/-_-_ ELL-_-_ ELL-_-_ ELL-_-_ ELL-_-_ ELL-_-_ *ELL-_-_ *ELL-_-_ Radius R Offset C Straight End D Unbent Length Weight Each Steel Aluminum lb. (kg) ELL/-_-SA-_ ELL/-_-SA-_ ELL-_-SA-_ ELL-/-_-SA-_ ELL-/-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ Metric size designator (ANSI C80.-99). * Not CSA certified. / () / () (7) -/ () -/ () () () (9) (0) (9) ().00 (0.0).0 (.0).7 (.0) 7. (8.) 8. (09.) 9.0 (.0) 0.0 (.70).00 (0.0).00 (8.00).00 (0.0).00 (09.0) 0.00 (7.00).00 (.0).0 (.0) 8.00 (0.0) 9.0 (.0).00 (79.0).00 (0.0).00 (.0).0 (9.0) 0.7 (7.0).7 (.).00 (787.0) 9.00 (990.0).00 (0.80).00 (0.80). (7.). (7.).7 (9.8).0 (88.90).0 (88.90).0 (88.90).7 (.0).7 (.0) 7.00 (77.80) 9.00 (8.0) 0.8 (.9).07 (8.). (.7).89 (0.) 8. (8.8).9 (.8).9 (9.7) 7. (9.8).0 (890.7). (90.7).70 (.). (.) 0.7 (.9) 0.9 (.07).77 (.97). (.80).98 (0.). (0.8) 9. (.09). (9.77).0 (9.8) 9.8 (7.80) 0.8 (.89) 8.9 (7.) Angle Material Colour ELL / _- _- _ = space for colour identifier 0 = 0º Blank = Steel = º SA = Aluminum 0 = 0º Blank = 90º R = Red ELL/SA-W is a / in. trade size 90º aluminum elbow coated in white PVC. H
6 Choose the Size and Angle to Meet your Exact Requirements OCAL-BLUE TM Large-Radius Elbows Fabricated from Ocal TM PVC-coated conduit Standard radius in 90 available for immediate shipment Special radius and degrees not listed are also available upon request Colour-coded thread protectors for easy identification of conduit size Radius R Offset C Straight End D Unbent Length Steel Aluminum LRELL_X-_-_ LRELL_X-_-SA-_ - (7- ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7-78) LRELL_X8-_-_ LRELL_X8-_-SA-_ - (7-0) LRELL_X-_-_ LRELL_X-_-SA-_ - (7-0) LRELL_X0-_-_ LRELL_X0-_-SA-_ - (7 - ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7 - ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7 - ) LRELL_X8-_-_ LRELL_X8-_-SA-_ - (7 - ) LRELL_X0-_-_ LRELL_X0-_-SA-_ - ( - ) Metric size designator (ANSI C80.-99). # and inch not CSA certified..00 (0.80).00 (8.00) 8.00 (7.0).00 (09.0) 0.00 (7.00).00 (9.0).00 (0.80) 8.00 (9.0) 0.00 (.00).9 (.0).00 (09.0). (7.0). (889.00). (0.0). (9.80). (7.0).00 (.00).00 (88.80) 9.00 (8.0) 9.00 (8.0) 0.00 (.00).00 (79.0).00 (79.0).00 (79.0).00 (0.80).00 (0.80).00 (0.80).00 (9.0). (0.80).00 (9.0). (98.0).9 (7.0). (98.0) 7. (8.00) 8. (90.80) 9.0 (997.0) Radius Angle Material Colour LRELL X _- _- _ = space for colour identifier = 0 = 0º Blank = Steel = = º SA = Aluminum etc. 0 = 0º Blank = 90º R = Red LRELLX8--G is a trade size steel elbow with a radius of 8 and an angle of º, coated in grey PVC H
7 PVC Coating Evenly Molded Around Saddle Prevents Exposure of Metal an Ocal TM Exclusive! Ocal TM PVC-Coated Beam Clamps and U-Bolts Beam clamps support and attach conduit runs to structural beams Molded right-angle beam clamps and U-bolts provide extra protection Nuts are encapsulated, (RA) providing complete protection. Hex-shaped nuts fit standard wrenches Stainless steel hardware included Parallel (PAR) and edge (EC) clamps feature nominal 0.0 in. ( mils) PVC coating for corrosion protection Right-Angle clamps (RA) and U-Bolts (UB) feature nominal 0.00 in. (0 mils) PVC coating for corrosion protection The coating is evenly molded around the saddle to prevent exposure to metal Parallel (PAR) Edge (EC) Right Angle (RA) PVC-Coated Beam Clamps Size Colour RA- _ = space for colour identifier Right Angle Parallel Edge RA/-_ PAR/-_ EC/-_ / () RA/-_ PAR/-_ EC/-_ / () RA-_ PAR-_ EC-_ (7) RA-/-_ PAR-/-_ EC-/-_ -/ () RA-/-_ PAR-/-_ EC-/-_ -/ () RA-_ PAR-_ EC-_ () RA-_ PAR-_ () RA-_ PAR-_ RA-_ PAR-_ (9) RA-_ PAR-_ (0) Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. U-Bolts A Boulon en U (UB) Size Colour UB- _ = space for colour identifier Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. A Dimension UB/-_ / ().8 (.9) UB/-_ / (). (9.9) UB-_ (7).8 (.8) UB-/-_ -/ ().9 (.) UB-/-_ -/ ().0 (.0) UB- ().97 (7.) UB-_ ().7 (88.) UB-.09 (0.98) UB-_ (9).9 (.8) UB-_ (0).09 (9.8) UB-_ (9). (8.8) UB-_ () 8.00 (0.0) Metric size designator (ANSI C80.-99). H
8 Support Conduit on Walls and Structures Pipe Straps PVC Coated Available in malleable iron/stamped steel with nominal 0.0 in ( mils) PVC coating in your choice of blue, white or grey Choose one- or two-hole versions Sized to allow for the extra thickness of the PVC coating Colour Suffix = colour identifier Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. Pipe Spacers PVC Coated Corrosion resistant PVC coated malleable iron. Pre-mountable, stackable to eliminate offsetting. Spacers can be stacked for offsets on wall or into outlet box. Prevents conduit rusting from wall condensation. Eliminates offsetting of conduit. One Hole Pipe Straps Pipe Strap (in.) Material Figure Pipe Spacers Fig. Fig. One Hole Pipe Straps 77CR* / Malleable iron 78CR* / Malleable iron 0CR* HSC-G** Steel Fig. Fig. HMS/-G** -/ Malleable iron 80CR* -/ Malleable iron HMS-C-G Malleable iron CR* Pipe Spacers HMS/-C-G Malleable iron CB/-G** HMS-C-G Malleable iron CB-G** 0CR Serie CB/-G HMS-C-G Malleable iron CB-G** * CSA Certified ** UL not applicable Two Hole Pipe Straps Pipe Strap (in.) Material Figure Pipe Spacers Two Hole Pipe Straps Fig. HMS-C-G Malleable iron HMS/-C-G Malleable iron HMS-C-G Malleable iron HMS-C-G Malleable iron HMCB-/-C-G HMCB--C-G H
Specifications Electrical Metallic Tubing (EMT)
T& Fittings Specifications Electrical Metallic Tubing (EMT) Ref. CEC Rule 12-000 not exceeding 750 Volts Electrical Metallic Tubing (EMT) is similar to rigid steel conduit but is much lighter, weighing
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationService Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationCONDUITS AND FITTINGS
CONDUIT AND FITTINGS Rigid Steel Conduit 3801 Rigid PVC Conduit 3803 HDPE Conduit 3803 Flexible Non Metallic Liquid Tight Conduit Type LFNC-B 3804 PVC Coated Urethane Lined Galvanized Rigid Steel Conduit
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationTOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
More informationSECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationCHAPTER 11 CONDUITS AND FITTINGS
CONDUITS AND FITTINGS CHAPTER 11 CONDUITS AND FITTINGS The standards and requirements for conduits and fittings used for traffic control signal and lighting systems are presented in this chapter. 11.1
More informationMeter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
More informationFIBERBOND DECK DRAINS
ENGINEERED COMPOSITE PIPING SYSTEMS DECK DRAINS www.fiberbond.com www.futurepipe.com DRAIN SERIES: Drain Selection and Installation Guide The drains contained in this booklet are available in the following
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationa gray co. SPIRAL, OVAL & RECTANGULAR DUCT CATALOG Lake Park, GA Coats, NC
a gray co. SPIRAL, OVAL & RECTANGULAR DUCT CATALOG Coats, NC Lake Park, GA Product Return Policy POLICIES All spiral, oval and rectangular duct products are made to order. Items cannot be cancelled once
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationPVC COATED RIGID METAL CONDUIT KK-113. Product Catalog & Buyer s Guide NO EQUAL!
PVC COATED RIGID METAL CONDUIT KK-113 Product Catalog & Buyer s Guide NO EQUAL! Table of Contents Table of Contents Introduction Performance Matters!...4-15 Corrosion Protection...16 Conduit PVC Coated
More informationB R OA DWAY RAC K. High Security
B R OA DWAY RAC K High Security The Broadway Rack is a great fit on Broadway or in areas where maximum security is a top priority. Made of thick, two-inch square steel, the Broadway Rack renders pipe-cutters
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationROLLING RACK. Simple Security
Simple Security The graceful design and high security of the Rolling Rack has made this type of bike rack a standard for many schools and communities. The Rolling Rack can be used as a single-sided or
More informationCONCRETE STEPS, HANDRAILS, AND SAFETY RAIL
SUDAS Standard Specifications Division 9 - Site Work and Landscaping Section 9080 - Concrete Steps, Handrails, and Safety Rail CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART - GENERAL.0 SECTION INCLUDES
More informationSeries 2000PV Mechanical Joint Restraint for PVC Pipe
Series 2000PV Mechanical Joint Restraint for PVC Pipe Features and Applications: For restraining plain end PVC pipe at mechanical joint fittings and appurtenances Sizes 3 inch through 36 inch Sizes 42
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationGeneral Information... B2 - B4 OCAL-BLUE Steel Conduit... B5 OCAL-BLUE Couplings... B6 OCAL-BLUE Elbows... B7 Standard Radius Elbows and Large Radius
General Information.................... 2-4 OCAL-LUE Steel Conduit.................. 5 OCAL-LUE Couplings..................... 6 OCAL-LUE Elbows....................... 7 Standard Radius Elbows and Large
More informationPVC-C metric Fittings
Fittings 23 00 01 Ben 90, PVC-C Raius = 2 Raius = 2 PN Coe SP kg z 20 16 723 000 106 10 0.030 40 27 58 25 16 723 000 107 10 0.055 50 35 71 32 16 723 000 108 10 0.075 64 38 88 40 16 723 000 109-0.276 80
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationMECHANICAL JOINT PIPE
3"-24" DUCTILE IRON FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Mechanical Joint ipe 3 Assembly of Mechanical Joint ipe 4 Technical Information 5 U.S. IE
More informationPVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe
Design and Installation Guide PVC Fittings & Laterals for Solid-Wall PVC Sewer Pipe TABLE OF CONTENTS Introduction 2 Products 3 Main-Line Fittings & Service-Line Fittings 3-4 Connections to Dissimilar
More informationPEN SEAL. Pipe Penetration Seals
PEN SEAL Pipe Penetration Seals PROCO s Pipe Penetration Seals have been designed to assist in achieving an efficient, low-cost mechanical seal between any Electrical Conduit, Concrete, Cast Iron, Steel,
More informationENGINEERING CATALOGUE Version 1.4
ENGINEERING CATALOGUE Version 1.4 Fiberglass Reinforced Composites Piping Tanks Equipment Engineering Services Table of Contents Commitment...3 Cooling Tower Piping...4 Tank & Vessels...5 FRP Piping &
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationDIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
More informationSuperstrut. Metal Framing. Pipe Straps, Pipe Clamps and Hangers
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger Design Pipe hangers are of advanced design
More informationCryogenic Pipe Support Systems
Cryogenic Pipe Support Systems Overview Rilco cryogenic pipe supports are developed to support cold piping in various applications ranging from chilled water to liquefied natural gas. The qualified service
More informationW ater T alk. Field Corrosion Testing using Coupons
W ater T alk Field Corrosion Testing using Coupons Volume 12, Issue 1 April 2012 Most Cooling Water systems are continuously in use. Therefore it is rare to have access to inspect the actual system to
More informationMERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationSECTION MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT
SECTION 11322 MECHANICAL SPECIFICATION GRIT COLLECTION EQUIPMENT PART 1 GENERAL 1.01 SCOPE There shall be furnished ( ) Grit Separator Mechanism(s) suitable for installation in (a) concrete tank(s) -ft.
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,
More informationThe following document can be provided to an Engineer, Contractor, or Owner to allow them to
MESAN series MXL Engineering Guide Specifications The following document can be provided to an Engineer, Contractor, or Owner to allow them to properly specify MESAN s MXL series Cooling Towers. 15XXX-
More informationThermal Diffusion Galvanizing
Engineering Test Report M-571 Thermal Diffusion Galvanizing For Pole Line Hardware Revision D 11.17.2017 Added further Corrosion Test results and Abrasion Test results Prepared by 1. Introduction to Thermal
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationTHE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS
THE NEXT GENERATION CUSH-A-BLOCK ROOFTOP SUPPORT SYSTEMS Connected.Simply www.zsi-foster.com Cush-A-Block Features: 100% Recycled Rubber Qualifies for LEED Credits Meets the Buy America Act and American
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationMETAL HANDRAILS AND RAILINGS. A. Properly identified manufacturer's literature, including shop and erection drawings before starting work.
SECTION 05520 METAL HANDRAILS AND RAILINGS PART 1 GENERAL 1.01 SUBMITTALS A. Properly identified manufacturer's literature, including shop and erection drawings before starting work. B. Railing Assemblies
More informationInsulated Panel System. QuadCore IND. Superior FIRE Protection. Unrivalled THERMAL Efficiency. ENHANCED Environmental Credentials
1 Superior FIRE Protection 2 Unrivalled THERMAL Efficiency 3 ENHANCED Environmental Credentials 4 Longest Performance GUARANTEE Insulated Panel System QuadCore IND Technical Information Projet / Usage
More informationSteel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More informationCom-Tray. Under Floor
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
More informationSheet Metal Connectors, Inc.
Sheet Metal Connectors, Inc. HVAC ACCESSORY PRICE CATALOG JANUARY 1, 2004 CONTRACTOR PRICES POLYKEN TAPES ELGEN PRODUCTS TEK & ZIP SCREWS DP1010 DUCT SEALANT MINNEAPOLIS, MN ROCKFORD, IL 5850 Main Street
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationSeries 1100 Mechanical Joint Restraint for Ductile Iron Pipe
MEGALUG Series 1100 Mechanical Joint Restraint for Ductile Iron Pipe Features and Applications: Sizes 3 inch through 54 inch Constructed of ASTM A536 Ductile Iron Torque Limiting Twist-Off Nuts Nominal
More information9ZN1204NB Clamp Guide. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 0. Weight per unit Product Category
9ZN1204NB Clamp Guide Cooper B-Line/Cable Tray Catalog Number 9ZN1204NB Manufacturer Cooper B-Line/Cable Tray Description ZNC CBL Tray CLMP Weight per unit N/A Product Category 20120123130154 Descriptions
More informationMonolithic Isolation Fittings
Monolithic Isolation Fittings The Industry s Dual O Ring Seal Standard Tests Include: 100% Hydrostatic Pressure & Electrical Tests 100% Ultrasonic of Welds 100% Magnetic Particle of Welds 100% Dye Penetrant
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
More information2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING
2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING E3305.3: now reads The space equal to the width and depth of the panelboard and extending
More informationCable Terminators COMMERCIAL AND INDUSTRIAL FITTINGS: RIGID AND IMC CONDUIT FITTINGS. Applications
Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Terminator The Terminator body is deep enough to provide an ample compound chamber
More informationLuka Quality Assurance Manual (Eng)
Luka Quality Assurance Manual (Eng) Contents: 1 General... 3 1.01 Foreword... 3 2. Quality assurance standards for air ducts... 4 A.1.00 Rectangular galvanised steel ducts... 4 A.2.00 Embedded galvanised
More informationCOMMERCIAL ITEM DESCRIPTION FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE
NOTICE OF VALIDATION INCH-POUND A-A-50552 NOTICE 1 30 October 2001 COMMERCIAL ITEM DESCRIPTION FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL FLEXIBLE A-A-50552, dated 31 May 1995, has been reviewed
More informationHIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61)
PART 1-GENERAL INTEGRALLY MOLDED FLANGED OUTLET (IMFO ) - COMPLETE DRAIN HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61) 1.01 Requirements 1. The
More informationCITY OF LOS ANGELES CALIFORNIA
BOARD OF BUILDING AND SAFETY COMMISSIONERS VAN AMBATIELOS PRESIDENT E. FELICIA BRANNON VICE PRESIDENT JOSELYN GEAGA-ROSENTHAL GEORGE HOVAGUIMIAN JAVIER NUNEZ CITY OF LOS ANGELES CALIFORNIA ERIC GARCETTI
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS. 1. Hangers and supports for electrical equipment and systems.
SECTION 26 05 29 HANGERS AND SUPPORTS FOR PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Hangers and supports for electrical equipment and systems. 1.2 DEFINITIONS A. EMT: Electrical
More informationSEWER FORCE MAIN HDPE PIPE
SECTION 15150 SEWER FORCE MAIN HDPE PIPE PART 1: GENERAL 1-1 DESCRIPTION: This specification governs the material, pipe, fittings, joining methods and general construction practice for High Density Polyethylene
More informationSeismic Restraints. Cent-R-Rail Supplement* SYSTEMS THAT MAKE SENSE
SRSCR-0 Seismic Restraints Cent-R-Rail Supplement* Multi-Directional Bracing For Data-Track, Half-Rack and Multi-Tier Half-Rack Systems Structural Engineer S 9 *To be used in conjunction with Cooper B-Line
More informationProject: Type: Qty: Optics. Series. Reflector Mounting Lamping Finish Voltage Options BLC - S BLC-L 21 1 /4" 36 1 /4" 3 1 /2" O.D.
Project: Type: Qty: Series Optics Mounting Lamping Finish Voltage Options Pole Series Finish Pole Options Series Optics Mounting Lamping Finish Voltage Options BLC Beta Lantern L S Flat Glass Lens Sagged
More informationGREEN THREAD Piping Systems
Bulletin No. A1300 February 15, 2006 SMITH FIBERCAST GREEN THREAD Piping Systems PRODUCT GREEN THREAD pipe is filament wound using an amine cured epoxy resin and fiberglass and has a resin-rich liner reinforced
More informationSECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationCHAIN LINK FENCES AND GATES
SECTION 02831 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.01 SUMMARY A. Alternate Material for Fence Post and Framing Material: Where schedule 40 galvanized steel is specified, the following will be accepted:
More informationInnovation in Joint Restraint Systems for PVC Pressure Pipe and Fittings. Clean & Safe Drinking Water Workshop. Wednesday, March 25, 2015
Innovation in Joint Restraint Systems for PVC Pressure Pipe and Fittings Clean & Safe Drinking Water Workshop Wednesday, March 25, 2015 Thrust forces Gasketed joints are made to seal and not to restrain,
More informationA. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPioneer Forced Draft Cooling Tower Specifications
Delta Cooling Towers, Inc. 41 Pine Street P.O. Box 315 Rockaway, New Jersey 07866-0315 Telephone 973.586.2201 Fax 973.586.2243 www.deltacooling.com sales@deltacooling.com Pioneer Forced Draft Cooling Tower
More informationCooling Tower Depot, Inc. 651 Corporate Circle, Suite 206 Golden, CO Phone (720) Fax: (720)
CTD Proposal : - Project: Project Location: Cooling Tower Design Conditions and Dimensions: Water Flow Rate (gpm) 0 CTD Model # Hot Water Temp (F) 0 Cell Dimensions (ft) L x W x H Cold Water Temp (F) 0
More informationHg Umbilical Installation Guide
0419-38002 Hg Umbilical Installation Guide GUIDELINES FOR THE INSTALLATION OF DEKORON UNITHERM MERCURY ANALYZER BUNDLES This bulletin provides the Field Engineer and Crafts with tips and techniques to
More informationSEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic
More informationSECTION MASONRY ACCESSORIES
PART 1 GENERAL 1.01 SCOPE OF WORK A. Contractor shall furnish all labor, materials, equipment and incidentals required to provide masonry accessories as shown on the Contract Drawings and specified herein.
More informationLANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below
More informationInsulated Panel Systems. 1, d0 IND E N 1350
Insulated Panel Systems DING TO OR 1, d0-1 ACC IND E N 1350 1 Project: TransWest nv, Kampveldstraat 45, 8020 Oostkamp, Belgium Use: Logistical platform with a negative temperature Technical Information
More informationShackles. Applications. Range. Design. CAD drawings. Finish
Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications.
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More information1 1 4" FRAMING SYSTEM
4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z
More informationSECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.
SECTION 02830 CHAIN LINK FENCES AND GATES (GALVANIZED) 1.0 GENERAL 1.1 Section Includes A. Fence framework, fabric, gates, and accessories. B. Excavation for post bases; concrete footing for posts. C.
More informationDIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 587 (52) 99 0543 www.icc es.org ESR 393 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 04 00 00 MASONRY
More informationThis product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationPATHWAYS FOR COMMUNICATIONS SYSTEMS
270528 PATHWAYS FOR PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment for the complete installation of work called for in the Contract Documents. 1.2 SCOPE OF WORK A. This
More informationSection BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
More informationHeight Finish Pole Options. Series Optics Mounting Lamping Finish Voltage. Metal Halide HPS. H w H070 70w H w H w
Series Optics Mounting Lamping / Wattage Finish Voltage SAMG Saturn Magnum MR Type V MTR* 6 Refractor Refractor is an integral part of the fixture and is not an option. Project: Type: SAMG MR Series Optics
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationGUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More information2. A preconstruction meeting with the TWA s staff is required prior to initiating construction.
General: 1. Construct utilities in accordance to TWA approved plans and shop drawings. Any deviation from the approved plans shall be approved by the DEVELOPER S ENGINEER and TWA 2. A preconstruction meeting
More informationDETAILED EQUIPMENT SPECIFICATION MFS SERIES FILTERS
5356 Hillside Avenue Indianapolis, IN 46220 P: +1 888-56-Water (569-2837) F: +1 317-255-4727 info@nancrede.com www.nancrede.com DETAILED EQUIPMENT SPECIFICATION MFS SERIES FILTERS 1.0 SCOPE 1.1 Provide
More informationSECTION PATHWAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270528 PATHWAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Communications equipment coordination and installation. 2. Sleeves for pathways and cables. 3. Raceway
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCopper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More information