Optimization of Transcritical CO 2 Refrigeration Cycle with Parallel Compression Economization
|
|
- Dominic Thornton
- 6 years ago
- Views:
Transcription
1 Paper N Optimizatin f Transcritical CO 2 Refrigeratin Cycle with Parallel Cmpressin Ecnmizatin Jahar Sarkar Department f Mechanical engineering, Institute f Technlgy, B.H.U, Varanasi, UP ; Tel: jahar_s@htmail.cm Keywrds: transcritical CO 2 cycle, parallel cmpressin ecnmizatin, theretical mdeling, ptimizatin, perfrmance imprvement Abstract Use f parallel cmpressin ecnmizatin is ne f the prmising cycle mdificatins t imprve the COP fr transcritical CO 2 refrigeratin system. The maim aim f the present study is t ptimize f carbn dixide refrigeratin cycle with the additin f parallel cmpressin ecnmizatin fr air-cnditining applicatins. The cycle COP imprvement ver the basic expansin cycle and effect n ptimum cycle high side, which is related the system design issues are presented as well. The cling COP imprvement using parallel cmpressin ecnmizatin can be realized if the rati f cling effect imprvement and ecnmizing cmpressr wrk is mre than the COP f basis expansin cycle. Study shws that there is sme ptimum ecnmizer where the COP imprvement is maximum. Althugh fr simultaneus ptimizatin f gas cler and ecnmizer, tw sets f ptimal values can btained fr maximum cling COP and COP imprvement ver the basic cycle. Fr studied gas cler exit temperatures, the ptimum ecnmizer s gives narrw values lies between 60 t 63 bar. At the ptimum cnditins, bth the cling COP and COP imprvement cmpared t basic cycle decreases with increases in gas cler exit temperature. Fr the given ranges f perating cnditins in this study, the maximum COP imprvement ver the basis expansin cycle is btained as 32.8% thrugh the theretical analyses. The use f parallel cmpressin ecnmizatin in transcritical CO 2 cycle is prfitable fr nt nly COP imprvement als fr lwer ptimum high side. Nmenclature COP cefficient f perfrmance COP b COP f crrespnding basic cycle h specific enthalpy (kj/kg) q specific refrigeratin effect (kj/kg) w c specific cmpressr wrk (kj/kg) x vapur quality COP COP imprvement (%) 1. INTRODUCTION While the synthetic refrigerants exhibit cnsiderably high ODP and GDP, the envirnment friendly natural refrigerant carbn dixide has gained interest lately as alternative refrigerants fr refrigeratin and aircnditining applicatins because f their zer ODP and negligible GWP [1]. As the COP f the basic transcritical CO 2 cycle is cnsiderably lwer than that f ther cnventinal refrigerant because f very high thrttling lss due t high drp cmpared t ther refrigerant based system [2], the cycle mdificatin fr COP imprvement became an essential part f research. There are seral reasns fr mdifying the basic single-stage transcritical cycle, including imprvement f COP, capacity enhancement fr a given system and cmpnent size, adaptatin f the heat rejectin temperature prfile t given requirements and keeping the rati and discharge temperature f the cmpressr within limit. In principle, a large number f mdificatins are pssible, including staging f cmpressin and expansin, splitting f flws, use f internal heat exchange, and wrk-generating expansin instead f thrttling [3]. Recent research prgress in different cycle mdificatins using internal heat exchanger, multistage cmpressin, wrk recvery expansin machine, vrtex tube expansin dice, ejectr expansin dice and thermelectric dice are rised in pen literatures [4-5].
2 2 The perfrmance f transcritical CO 2 refrigeratin cycle can be als imprved by seral percentages thrugh the successful use f parallel cmpressin ecnmizatin. In parallel cmpressin refrigerating system, refrigerant vapur is cmpressed t supercritical discharge in tw separate nn-mixing streams; ne cming frm an ecnmiser and the ther cming frm the main apratr, s sme cylinders f cmpressr are used t cmpress vapr frm intermediately (in ecnmizer). The parallel cmpressin system will have wide applicatin fr autmtive air cnditining, windw air cnditiners and small water chillers, where it is nt apprpriate t use screw r scrll cmpressrs [6]. Thrugh the theritical analysis and experimentatin fr air cnditining applicatin with additin f superheat fr the primary cmpressin path, Bell [7] shws that the ecnmized carbn dixide system utperfrms a similar hydrcarbn system in terms f efficiency and capacity under sme cnditins and mst efficient fr lwer gas cler exit temperature fr fixed discharge. Althugh detailed ptimizatin studies are scare. In the present study, ptimizatin studies n transcritical CO 2 refrigeratin cycle with the additin f parallel cmpressin ecnmizatin have been dne fr aircnditining applicatins. The cling COP imprvement ver the basic expansin cycle and effect n ptimum discharge are presented as well. Figure 1: Pressure-enthalpy diagram f parallel cmpressin system 2. THEORETICAL MODELING The -enthalpy diagram f a transcritical CO 2 cycle with parallel cmpressin ecnmizatin is shwn in Fig. 1. After the expansin f transcritical fluid frm states 6 t 7 thrugh primary expansin valve, the liquid (state 8) and vapur (3) are separated in ecnmizer. The liquid is again expanded thrugh anther expansin valve and it extracts heat t give useful cling effect in the apratr (frm states 9 t 1). In the cmpressr, the saturated vapurs frm apratr as well as ecnmizer are cmpressed simultaneusly t states 2 and 4, respectively. Then bth the supercritical fluids mix (state 5) and enter t the gas cler fr heat rejectin t the external fluid (sates 5 t 6). The internal heat exchanger is nt used in this study due t its negligible effect n perfrmance [7]. By parallel cmpressin, quality f refrigerant decreases in apratr and bth refrigeratin effect and cmpressr wrk increase, but increase in cmpressr wrk is less than increase in refrigeratin effect, hence COP increases. The entire system has been mdeled based n the energy balance f individual cmpnents f the system. Steady flw energy equatins based n first law f thermdynamics have been emplyed in each case and specific energy quantities are used. The fllwing assumptins have been made in the thermdynamic analysis: 1. Heat transfer with the ambient is negligible. 2. Cmpressin prcess is adiabatic but nn-isentrpic. 3. Evapratin and gas cling prcesses are isbaric. 4. Separatin and mixing prcesses are isbaric. 5. Refrigerant at apratr utlet is saturated vapr. Fr bth the expansin prcesses in expansin valves, h6 = h7 & h8 = h9 (1) Fr unit ttal mass flw rate, the mass flw rates thrugh the ecnmizing and main cmpressrs are x and 1-x, respectively, where, vapur quality x is given by, h7 h8 x = (2) h3 h8 The specific enthalpy f CO 2 at the gas cler inlet can be fund by, h = xh + 1 x h (3) ( ) Specific refrigerating effect f the apratr: ( 1 )( ) q = x h h (4) 1 9 Specific wrk input t the cmpressr: w = x h h + 1 x h h (5) c ( ) ( )( ) The cling COP fr parallel cmpressin ecnmizatin is given by: q w COP = (6) c
3 3 and the cling COP f crrespnding basic cycle is given by, b ( ) ( ) COP = h h h h (7) Hence, the COP imprvement cmpared t basic cycle: COP = 100 ( COP COPb) COPb (8) Nw, fr n COP imprvement, ne can write, 1 x (1 x) ( h6 h8) COP = COPb = COPb = (9) 1 x x( h4 h3) Hence, cling COP imprvement can be realized if the rati f cling effect imprvement and ecnmizer cmpressr wrk is mre than the COP b, i.e. (1 x) ( h6 h8) COPb (10) xh ( 4 h3) Based n the thermdynamic analysis presented abve, a simulatin cde was delped t investigate the effect f different perating parameters, which can aluate the cling COP and COP imprvement ver basic cycle fr given apratr temperature, gas cler exit temperature, cmpressr discharge and ecnmizer. The cmpressr utlet cnditins were aluated using fixed isentrpic efficiency. This cde was integrated with the thermdynamic prperty subrutine CO2PROP, delped based n Span and Wagner equatins [8], t cmpute relant thermdynamic prperties f carbn dixide. COP imprvement (%) bar 95 bar 85 bar t = 5 C, t = 40 C c Ecnmizer (bar) Figure 2: COP imprvement with ecnmizer at different discharge 3. RESULTS AND DISCUSSION The perfrmance f the transcritical carbn dixide cycle with parallel cmpressin ecnmizatin, being studied fr air-cnditining applicatins, have been aluated fr varius ecnmizer, cmpressr discharge and gas cler exit temperature. The fllwing input parameters have been taken fr the study: apratin temperature = 5 C (typically used fr aircnditining applicatins), isentrpic efficiency = 75% fr bth main and ecnmizing cmpressrs. Fr the calculatin f ptimal values f cmpressr discharge and ecnmizer s, 0.2 bar step was taken in numerical simulatin. COP imprvement (%) t = 5 C, t = 40 C Imprvement COP Cmpressr discharge (bar) c Cling COP Figure 3: Effect f discharge n perfrmance at ptimum ecnmizer The variatin f COP imprvement ver basic cycle with ecnmizer fr different discharge at gas cler exit temperature f 40 C is shwn in Fig. 2. As the vapur quality decreases with increase in ecnmizer, but the refrigeratin effect decreases due t increase in liquid enthalpy, and the ecnmizing cmpressr wrk decreases due t decrease in quality. Initially, the COP imprvement increases due t less predminant effect f refrigeratin effect, whereas, after sme ptimum, the liquid enthalpy increases very fast (near the critical, slpe change f saturatin line is very fast) and the COP imprvement declined. When the ecnmizer inlet tuches the saturated liquid line, the cycle becmes basic cycle and cycle becmes unrealistic if tuches vapr line. When Eq. (10) is nt satisfied, COP imprvement is negative. Fr discharge f 85 bar
4 4 (Fig. 2), imprvement becmes negative after 66 bar and unrealistic after 69.6 bar. Maximum imprvement (%) COP imprvement Cling COP Optimum COP Figure 4: Variatin f cling COP and COP imprvement with gas cler exit temperature fr maximum imprvement Discharge (bar) Discharge Ecnmizer Ecnmizer (bar) Figure 5: Variatin f discharge and ecnmizer s with gas cler exit temperature fr maximum imprvement The variatins f cling COP and the COP imprvement ver the basic valve expansin cycle with cmpressr discharge fr ptimum ecnmizer are shwn in Fig. 3 at gas cler exit temperature f 40 C. Interestingly, the discharge gives tw ptimal pints: ne fr maximum COP and anther fr maximum imprvement. This can be attributed by the fact that the discharge ptimizatin based n maximum COP is due t the S-shape nature f istherm line near the critical pint and ptimizatin based n maximum imprvement is due t the slpe changing nature f saturatin curve and the bth ptimal pints may nt be the same. The ptimum discharge based n maximum COP gives the higher value than that based n maximum imprvement. Optimum imprvement (%) COP imprvement Cling COP Maximum COP Figure 6: Variatin f cling COP and COP imprvement with gas cler exit temperature fr maximum COP The variatins f cling COP and COP imprvement ver basic cycle and crrespnding ptimum cmpressr discharge and ecnmizer based n maximum COP imprvement with gas cler exit temperature are shwn in Figs. 4 and 5, respectively. The results shw that the variatin in the gas cler exit temperature has a significant effect n system perfrmance and perfrmance imprvement. The effect n ptimal discharge is als very significant; hwer effect is mderate fr ptimal ecnmizer. It can be nted that the variatin trends f ptimum s are rerse. With 10 C increase in gas cler exit temperature, the ptimum discharge increases by 22 bar, whereas, ecnmizer decreases by nly 3 bar. With increase in gas cler exit temperature, as the ptimum discharge increases, the vapur quality increases significantly and hence the imprvement f refrigeratin effect reduces but the ecnmizer cmpressr wrk increases, which lead
5 5 t reductin f COP imprvement. The results indicate that the design f system fr lwest pssible gas cler exit temperature is mre effective fr nt nly higher cling COP and COP imprvement but als fr lwer ptimum high side. Discharge (bar) Discharge Ecnmizer Ecnmizer (bar) Figure 7: Variatin f discharge and ecnmizer s with gas cler exit temperature fr maximum COP Optimum discharge (bar) Maximum COP Maximum imprvement Basic cycle Figure 8: Effect n ptimum discharge by using parallel cmpressin The variatins f cling COP and COP imprvement ver basic cycle and crrespnding ptimum cmpressr discharge and ecnmizer based n maximum cling COP with gas cler exit temperature are shwn in Figs. 6 and 7, respectively. It may be nted that the cling COP decreases significantly frm 2.82 t 1.83 and COP imprvement frm 19% t % with 10 C increase in gas cler exit temperature. As the variatin in the cler utlet temperature has a significant impact n the ptimal design cnditins [1], the ptimum discharge increases sharply frm 96 t 120 bar with the gas cler exit temperature. Hwer, the effect f gas cler exit temperature n ptimum ecnmizer is negligible. This can be attributed that althugh the shape f istherm changes with change in temperature, the shape f saturatin curve is unaltered. Results shw that fr higher gas cler exit temperature, the system is nt prfitable in term f cling COP and COP imprvement as well as cst due t high ptimum discharge. Results clearly shw that the use f parallel cmpressin ecnmizatin is mre prfitable at lwer gas cler exit temperature due t higher COP imprvement. The effect f using parallel cmpressin ecnmizatin n the variatin f ptimum discharge with gas cler exit temperature is shwn in Fig. 8. The variatin is very similar t the basic valve expansin cycle, hwer, the ptimum values f high side reduces significantly with the use f parallel cmpressin ecnmizatin as ident frm Fig. 8 and the use f parallel cmpressin ecnmizatin in transcritical CO 2 air-cnditining system is ecnmical in term f lwer high side als. The ptimum discharge based n the maximum COP imprvement is significantly lwer than that n maximum cling COP due t the reasn discussed abve. It is very interesting t nt that fr fixed cmpressr discharge, COP imprvement at ptimum ecnmizer increases initially then decreases with increases in gas cler exit temperature and give sme ptimal value f gas cler exit temperature. Althugh fr simultaneus ptimizatin f gas cler and ecnmizer, bth the cling COP and COP imprvement cmpared t basic cycle decreases with increases in gas cler exit temperature. Present results shw that the maximum COP imprvement ver the basis expansin cycle is btained as 32.8%. 4. CONCLUSIONS A detailed ptimizatin studies n transcritical CO 2 refrigeratin cycle with the additin f parallel cmpressin ecnmizatin have been dne fr air-cnditining applicatins. The cling COP imprvement ver the basic expansin cycle and effect n ptimum discharge are presented as well. Study shws that the cling COP
6 6 imprvement using parallel cmpressin ecnmizatin can be realized if the rati f cling effect imprvement and ecnmizing cmpressr wrk is mre than the COP f basis expansin cycle. Fr simultaneus ptimizatin f discharge and ecnmizer, tw sets f ptimal values can btained fr maximum cling COP and COP imprvement ver the basic cycle. Althugh the ptimum discharge varies significantly with gas cler exit temperature, the ptimum ecnmizer gives narrw values lies between 60 t 63 bar. With the increase in gas cler exit temperature, bth the cling COP and COP imprvement at ptimum cnditins decrease, whereas the ptimum discharge increases. The ptimum discharge based n the maximum COP imprvement is significant lwer than that n maximum cling COP. The design f system fr lwest pssible gas cler exit temperature is mre effective fr nt nly higher cling COP and COP imprvement als fr lwer ptimum high side. Fr the studied ranges f perating cnditins, the maximum COP imprvement ver the basis expansin cycle is btained as 32.8%. The use f parallel cmpressin ecnmizatin in transcritical CO 2 aircnditining system is prfitable fr nt nly COP imprvement als fr lwer ptimum high side. References [1] Kim, M.H., Pettersen, J., Bullard, C.W., 2004, Fundamental prcess and system design issues in CO 2 vapr cmpressin systems, Prgress Energy Cmbustin Science, 30, n.2: [2] Sarkar, J., Bhattacharyya, S., Ramgpal, M., 2005, Transcritical CO 2 heat pump systems: Exergy analysis including heat transfer and fluid flw effects, Energy Cnversin & Management, 46, n.13-14: [3] Lrentzen, G., 1994, Rival f Carbn dixide as a refrigerant, Internatinal Jurnal f Refrigeratin, 17, n.5: [4] Grll, E.A., Recent advances in the transcritical CO 2 cycle technlgy. 8 th Natinal & 7 th ISHMT- ASME Heat & Mass Transfer Cnference (January 4-6), IIT Guahati, India. [5] Grll, E.A., Kim, J.H., 2007, Riew f recent advances tward transcritical CO2 cycle technlgy, HVAC&R Research, 13, n.3: [6] Pearsn, S.F., 2005, Imprved transcritical refrigeratin cycle, Eurpean Patent EP [7] Bell, I., 2004, Perfrmance increase f carbn dixide refrigeratin cycle with the additin f parallel cmpressin ecnmizatin, 6 th IIR Gustav Lrentzen Natural Wrking Fluid Cnference, Glasgw UK. [8] Span, R., Wagner, W., 1996, A new equatin f state fr Carbn dixide cvering the fluid regin frm triple pint temperature t 1100 K at up t 800 MPa, Jurnal Physical. Chemical Reference Data, 25: Bigraphy Authr received his M. Tech. and Ph.D. degrees in Mechanical Engineering frm Indian Institute f Technlgy Kharagpur in 2001 and 2006, respectively. After, he jined the faculty f Institute f Technlgy, Banaras Hindu University and wrking as a Lecturer in Mechanical Engineering Department till date. Authr has published 12 research papers in internatinal jurnal and 12 in natinal and internatinal cnferences in seral areas f Heat Transfer and Refrigeratin.
THERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING MAT LAB AND FLOEFD SOFTWARE
IJRET: Internatinal Jurnal f Research in Engineering and Technlgy ISSN: 319-1163 THERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING MAT LAB AND FLOEFD SOFTWARE A.GpiChand 1, A. V. N. L. Sharma, G.
More informationHeat Pump KEYMARK. Date Description of modification Revision number Initial version 1
Page: 1 f 26 Date Descriptin f mdificatin Revisin number 14-12-2015 Initial versin 1 10/03/2017 Additin f air/air Editrial changes Annex E included in reference t pren12102-2 suppressed Reference t EN
More informationInvestigation of the effect of packing location on performance of closed wet cooling tower based on exergy analysis
IOP Cnference Series: Materials Science and Engineering PAPER OPEN ACCESS Investigatin f the effect f packing lcatin n perfrmance f clsed wet cling twer based n exergy analysis T cite this article: S M
More informationANALYSIS OF ENERGY EFFICIENCY OF CHILLERS OPERATION AT NIGHT
, Vlue 2, Nuber, p.8-22, 200 ANALYSIS OF ENERGY EFFICIENCY OF CHILLERS OERATION AT NIGHT Y.A. Li, M.Z. Yu and G.L. Xu Shandng Institute f Architecture and Engineering, Ji nan, 25004,.R. China (Received
More informationEXERGY ANALYSIS OF A SOFC BASED COGENERATION SYSTEM FOR BUILDINGS
EXERGY ANALYSIS OF A SOFC BASE COGENERATION SYSTEM FOR BUILINGS C. Ozgur Clpan 1, Ibrahim incer, Feridun Hamdullahpur 3 1, 3 epartment f Mechanical and Aerspace Engineering epartment, Carletn University,
More informationIBM Global Services. Server Optimization ... Trends and Value Proposition That Can Drive Efficiencies and Help Businesses Gain A Competitive Edge
IBM Glbal Services Server Optimizatin.......... Trends and Value Prpsitin That Can Drive Efficiencies and Help Businesses Gain A Cmpetitive Edge Intrductin A typical rganizatin s success and ability t
More informationPumping Plant Performance Evaluation
Pumping Plant Perfrmance Evaluatin Prepared by: Rbert Evans, Extensin Agricultural Engineering Specialist R. E. Sneed, Extensin Agricultural Engineering Specialist J. H. Hunt, Extensin Agricultural Engineering
More informationModule 2: Solid Fossil Fuel (Coal) Lecture 13: Coal liquefaction
1 P age Mdule 2: Slid Fssil Fuel (Cal) Lecture 13: Cal liquefactin IIT Kharagpur NPTEL Phase II Web Curses 2 P age Keywrds: Direct cal liquefactin, indirect cal liquefactin, EDS prcess, H-cal prcess 2.5
More information9707 BUSINESS STUDIES
CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Advanced MARK SCHEME fr the May/June 2014 series 9707 BUSINESS STUDIES 9707/31 Paper 3 (Case Study), maximum raw mark 100 This mark scheme is published as an aid
More informationTechnical Mathematics in Air Conditioning and Refrigeration. Air Conditioning, Welding and Water Technologies Department. o Work Experience, General
SECTION A - Curse Infrmatin 1. Curse ID: 2. Curse Title: 3. Divisin: 4. Department: AIRC 10 Technical Mathematics in Air Cnditining and Refrigeratin Technlgy and Health Divisin Air Cnditining, Welding
More informationKCP&L LaCygne Unit 1 - CFD Modeling for SCR Optimization
February 5, 2014 KCP&L LaCygne Unit 1 - CFD Mdeling fr SCR Optimizatin EUEC Cnference 2014 Reid Thmas AGENDA KCPL Prblem Statement Flue gas flw maldistributin and excessive flyash pluggage in LaCygne 1
More informationFigure 1: The Process of Extrusion.
Experiment (4) Extrusin Operatins Dr. Mhammad Al-tahat Department f Industrial Engineering. University f Jrdan. Lab. Of Manufacturing Prcesses. Curse N: 90641, 090641 1. Objective: The main bjective f
More informationExergetic and energetic analysis of a 210 MW Thermal Power Plant in Pakistan
Technical Jurnal, University f Engineering and Technlgy (UET) Taxila, Pakistan Vl. 22 N. I-27 Exergetic and energetic analysis f a 2 MW Thermal Pwer Plant in Pakistan,5 2 4,5 6 N. Husnain, W. A. Khan,
More informationWelding. Course Design
Welding Curse Design 2007-2008 Curse Infrmatin Organizatin Eastern Arizna Cllege Divisin Industrial Technlgy Educatin Curse Number MSP 110 Title Welding Credits 2 Develped by Newell Dryden Lecture/Lab
More informationSolution: Unix and Linux are examples of multi-user operating systems used to handle voluminous data and complex reporting requirements.
1. State the fur basic requirements f a database applicatins. Slutin: The fur basic requirements f database applicatins are Frnt-end interface Back-end database Data prcessing Reprting System 2. Name the
More informationLCOH for Solar Thermal Applications
Descriptin: Date: 06/03/2017 Authrs: Guideline fr levelized cst f heat (LCOH) calculatins fr slar thermal applicatins Yann Luvet (University f Kassel), Stephan Fischer (ITW Stuttgart), Simn Furb (Technical
More informationManufacturability Demonstration And Assessment Of Aerogel Applicability As An Insulation Replacement For emmrtg Flight Module
Manufacturability Demnstratin And Assessment Of Aergel Applicability As An Insulatin Replacement Fr emmrtg Flight Mdule Ying Sng 1, Jshua Wjcik 1, Tim C. Hlgate 1, Glenn Gaines 1, Rb Utz 1, Mihaela Niclau
More informationChapter 8: Reporting and Interpreting Cost of Goods Sold and Inventory October 22, 24, 2013
Chapter 8: Reprting and Interpreting Cst f Gds Sld and Inventry Octber 22, 24, 2013 Merchandising and Manufacturing vs. Service Merchandising and Manufacturing (Merchandiser = Retailer) Sales revenue Cst
More informationVibration Characteristics of 50 Hz, 120 MW Gas Turbine
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 345 E. 47 St., New Yrk, N.Y. 7 85-IGT-4 The Sciety shall nt be respnsible fr statements r pinins advanced in papers r in discussin at meetings f the Sciety
More informationEnhancement of ESP performance of Thermal Power Plant : a controlling measure towards Environmental Sustainability.
Enhancement f ESP perfrmance f Thermal Pwer Plant : a cntrlling measure twards Envirnmental Sustainability. Abstract SN Patra & UK Sarangi. NALCO, Angul, Odisha, India e-mail: patra_surendranath@yahmail.c.in
More informationFamily Support Service Provider Quick Reference Guide to CYBER
Welcme Page: Family Supprt Service Prvider Quick Reference Guide t CYBER Links t Mnitr Regularly: Authrizatin Current: Will list all currently pen authrizatins; shuld include nly thse yuth currently receiving
More informationAnthropometric Analysis of Classroom Furniture Used in Colleges
Internatinal Jurnal f Engineering Research and Develpment e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.cm Vlume 3, Issue 10 (September 2012), PP. 01-07 Anthrpmetric Analysis f Classrm Furniture Used
More informationOEM-Pro Installation & Operations Guide
OEM-Pr Installatin & Operatins Guide Installatin & Maintenance Guide Operatin The OEM-PRO range f Expansin Vessels is specifically designed fr Unvented Systems when used as part f an additinal piece f
More informationEVALUATION AND RATING. Guidelines and instructions for completing the application for evaluation and rating via the NRF Online Submission System
EVALUATION AND RATING Guidelines and instructins fr cmpleting the applicatin fr evaluatin and rating via the NRF Online Submissin System Please nte that the clsing date fr applicatins is 15 February 2017
More informationNon-Treaty Storage Utilization System Modeling Summary
Nn-Treaty Strage Utilizatin Nn-Treaty Strage Utilizatin 1.0 Operatinal Mdeling 1.1 Intrductin BC Hydr is currently examining fur scenaris fr utilizatin f Mica Nn-Treaty Strage. BC Hydr simulated these
More informationEdexcel (A) Economics A-level
Edexcel (A) Ecnmics A-level Theme 4: A Glbal Perspective 4.1 Internatinal Ecnmics 4.1.6 Restrictins n free trade Ntes www.pmt.educatin Reasns fr restrictins n free trade: Prtectinism is the act f guarding
More informationP&H Mining Equipment. P&H Response to Surface Mining Association for Research & Technology (SMART) Scope of Vision
P&H Mining Equipment P&H Respnse t Surface Mining Assciatin fr Research & Technlgy (SMART) Scpe f Visin SMART Summit Meeting Vancuver, BC, Canada May 8, 2010 SMART Scpe f Visin The Surface Mining Assciatin
More informationTaking Advantage of Combined Heat and Power (CHP)
Taking Advantage f Cmbined Heat and Pwer (CHP) State Energy Efficiency Plicy Retreat Missuri August 19 th, 2014 Presented by: Jhn Cuttica Energy Resurces Center University f Illinis at Chicag www.midwestcleanenergy.rg
More informationKCM-Line Air Cooled Condensers
PRODUCT DATA & INSTALLATION Bulletin K50-KCM-PDI- 08780 r 50Hz see Bulletin K50-KCM-PDI-50 KCM-Line Air Cled Cndensers Refrigerant: R404A, R507, R, R407C Electrical Pwer: 08-30//60, 08-30/3/60, 460//60,
More informationInventory Control Models Chapter 6
Lecture 9 Intrductin Inventry Cntrl Mdels Chapter 6 T accmpany uantitative Analysis fr Management, Eleventh Editin, by Render, Stair, and Hanna n Inventry is an expensive and imprtant asset t many cmpanies.
More informationGuidance on Calculation of Outdoor Water Use Reductions for LEED Canada for Homes Credits SS 2.5 and/or WE 2.3
Guidance n Calculatin f Outdr Water Use Reductins fr LEED Canada fr Hmes Credits SS 2.5 and/r WE 2.3 This guidance dcument prvides an verview f the calculatin prcedures fr estimating the reductin in utdr
More informationSeismic Performance Evaluation of RCC Buildings with Different Structural Configurations
Kalpa Publicatins in Civil Engineering Vlume 1, 2017, Pages 375 380 ICRISET2017. Internatinal Cnference n Research and Innvatins in Science, Engineering &Technlgy. Selected papers in Civil Engineering
More informationEMISSION REDUCTIONS UNDER CAP-AND-TRADE PROPOSALS IN
EMISSION REDUCTIONS UNDER CAP-AND-TRADE PROPOSALS IN THE 111 TH CONGRESS Jhn Larsen and Rbert Heilmayr June 25, 2009 This analysis prvides an assessment f reductins in greenhuse gas (GHG) emissins relative
More informationOptimization of a spool-geometry for jet force compensation in a pressure control valve
Optimizatin f a spl-gemetry fr jet frce cmpensatin in a pressure cntrl valve C. Hugel (M. Eng.) Hilite Germany GmbH 28.06.2016 Mtranwendungen Getriebeanwendungen 0 Inhaltsübersicht 1. What is Hilite Internatinal
More informationMIS Exam Revision Modules 1-11!
MIS Exam Revisin Mdules 1-11 Mdules 1-4 Chapter 1: Why MIS? The Imprtance f MIS All based arund Mre s Law. The number f transistrs per square inch n an integrated chip dubles every 18 mnths. Speed f a
More informationPackaging regulations
Packaging regulatins This guidance applies t yu if yu wn, manage r wrk fr a business that prduces, uses r handles packaging r packaging materials. Prducer Respnsibility Obligatins - What yu must d! If
More informationB. What could be the impact on the financial system of a CBDC, and how could this affect financial stability?
Primary questins Frm the full list belw we have highlighted sme primary questins which will frm the cre f the Bank s research, reflecting ur respnsibility fr mnetary and financial stability. The purpse
More information1 Routes to Syngas. 1.1 General trends Towards focus and sustainability
1 Rutes t Syngas 1.1 General trends 1.1.1 Twards fcus and sustainability Synthesis gas (syngas) is a mixture f hydrgen, carbn mnxide and carbn dixide. It may als cntain nitrgen as applied fr the ammnia
More informationGeneral guidance Time series consistency. Version Guidebook Lead author Justin Goodwin. 4. Time series consistency
Categry GG Versin Guidebk 2009 Title General guidance Time series cnsistency Lead authr Justin Gdwin EMEP/EEA emissin inventry guidebk 2009 1 Cntents 1 Time series cnsistency...3 1.1 Intrductin...3 1.2
More informationNOVEL BURNER CONCEPT FOR PREMIXED SURFACE-STABILIZED COMBUSTION. S. Shakariyants Micro Turbine Technology MTT, b.v.
Prceedings f ASME Turb Exp 212 GT212 June 11-15, 212, Cpenhagen, Denmark GT212-6936 NOVEL BURNER CONCEPT FOR PREMIXED SURFACE-STABILIZED COMBUSTION V. N. Krnilv S. Shakariyants Micr Turbine Technlgy MTT,
More informationEffect of Boron on the Microstructure Low-Carbon Steel Resistance Seam Welds
WELDING RESEARCH SUPPLEMENT I 249-s f Effect f Brn n the Micrstructure Lw-Carbn Steel Resistance Seam Welds Small levels f brn in steel lead t hard weld metal micrstructure and therefre must be cnsidered
More informationUnderstanding Reliability Assurance Method in Mature Operations
Understanding Reliability Assurance Methd in Mature Operatins Authr: Mr Steve Turner BEng MBA Directr and Principal Cnsultant OMCS Internatinal ABSTRACT Mst rganisatins try t eliminate defects and investigate
More informationName Phone Logo. W&RSETA W&RSETA
Occupatinal Qualificatin Dcument Occupatinal Cde Qualificatin Title NQF Level Lg 523101 Occupatinal Certificate: Checkut Operatr 2 Name Email Phne Lg Develpment Quality Partner W&RSETA imarrian@wrseta.rg.za
More informationAcceptance criteria for process capability indexes generated from statistical tolerance intervals as per ISO
Acceptance criteria fr prcess capability indexes generated frm statistical tlerance intervals as per Backgrund Justificatin fr sampling plans and statistical analysis f results is a requirement fr prcess
More informationWhite Paper on Distributor Inventory Why distributors have too much Inventory
2014 White Paper n Distributr Inventry Why distributrs have t much Inventry Since 2007 the United States has been In and wrking its way ut f a recessin In 2013-14 Whlesalers are finding that THINGS are
More informationA Systemic Approach to better Health
A Systemic Apprach t better Health Systemic Calls fr Tender in the Healthcare Sectr May 2017 Published by: Backgrund Infrastructure investments in the healthcare sectr ften face challenges that lead t
More informationHeating Rate Effects. > Tm. Extended Chains. o o ,000 Heating Rate ( K / min )
Heating Rate Effects Large sample size Tm > Tm 400 Extended Chains Dendrites 395 Single Crystals 1 10 100 1,000 Heating Rate ( K / min ) Single crystals melting pint increases as heating rate decreases
More informationEnergy Efficiency and Conservation Working Group Meeting #4. May 24, 2016; 1:00 pm 3:00 pm. Meeting Summary
Energy Efficiency and Cnservatin Wrking Grup Meeting #4 May 24, 2016; 1:00 pm 3:00 pm Meeting Summary I. Meeting Objectives T develp draft bjectives fr recmmendatin t the energy plan leadership team. T
More informationfrontporch INBOUND MARKETING THE BLUEPRINT TO YOUR SUCCESS
frntprch INBOUND MARKETING THE BLUEPRINT TO YOUR SUCCESS Inbund Marketing: The Blueprint t Yur Success Building a slid, thughtful and well-planned inbund marketing campaign is crucial t grwing yur cmpany
More informationVALUE MANAGEMENT IN CONSTRUCTION PROJECT
- 4-5 2014 4 5 DECEMBER 2014 FIRST SCIENTIFIC - APPLIED CONFERENCE WITH INTERNATIONAL PARTICIPATION "PROJECT MANAGEMENT IN CONSTRUCTION"/PMC/ UNIVERSITY OF ARCHITECTURE, CIVIL ENGINEERING AND GEODESY VALUE
More informationSpecial Report. Debunking. the Top. Eight Myths. in Your DSD Mobile. Security Strategy. Surrounding Small-Business. Warehouse Management Systems
Special Reprt Debunking the Tp in Yur DSD Mbile Security Strategy Surrunding Small-Business Eight Myths Warehuse Management Systems Intrductin The era f manual warehuse peratins is drawing t a clse with
More informationCombined Partial Oxidation and Carbon Dioxide Reforming Process: A Thermodynamic Study
American Jurnal f Applied Sciences 8 (1): 9-14, 2011 ISSN 1546-9239 2010 Science Publicatins Cmbined Partial Oxidatin and Carbn Dixide Refrming Prcess: A Thermdynamic Study Smpp Jarungthammachte Department
More informationCareer Entry and Development Profile Companion Guide. A Guide for ITT Tutors and Induction Tutors
Career Entry and Develpment Prfile Cmpanin Guide A Guide fr ITT Tutrs and Inductin Tutrs Intrductin Wh is the cmpanin guide fr? This guide is fr initial teacher training (ITT) tutrs wrking with trainees/teachers,
More informationMSU Extension Publication Archive. Scroll down to view the publication.
MSU Extensin Publicatin Archive Archive cpy f publicatin, d nt use fr current recmmendatins. Up-t-date infrmatin abut many tpics can be btained frm yur lcal Extensin ffice. Nitrgen Management fr Michigan
More informationTwo warehouse inventory policy with price dependent demand and deterioration under partial backlogging
Decisin Science Letters 6 (27) 22 Cntents lists available at GrwingScience Decisin Science Letters hmepage: www.grwingscience.cm/dsl Tw warehuse inventry plicy with price dependent demand and deteriratin
More informationMATERIAL AND PROCESS DEVELOPMENTS IN THE MANUFACTURE OF FORK ARMS FOR MATERIALS HANDLING
G.E.Bltn MATERIAL AND PROCESS DEVELOPMENTS IN THE MANUFACTURE OF FORK ARMS FOR MATERIALS HANDLING Technical Directr, MSI Mechfrge, Carr Hill, Balby, Dncaster, DN4 8DH ABSTRACT The mst safety critical item
More informationENERGY-RECOVERY FROM SOLIDS IN ST. PETERSBURG, FL: BIOGAS TO VEHICLE FUEL AND CHP. Phone:
ENERGY-RECOVERY FROM SOLIDS IN ST. PETERSBURG, FL: BIOGAS TO VEHICLE FUEL AND CHP Jhn L. Willis *, Brwn and Caldwell * Email: JWillis@BrwnCald.cm Phne: 770-361-6431 ABSTRACT The City f St. Petersburg,
More informationCHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION 1.1 Intrductin t tpic Biavailability is cnsidered t be ne f the mst imprtant pharmackinetic parameters f any drug develped fr extra vascular administratin. Oral biavailability is
More informationPEPA CHECKLIST FOR WASTE MANAGEMENT INFRASTRUCTURE TO ASSESS THE STATUS OF PLANNING/PROGRAMMING OF THE PROJECT PIPELINE
_ PEPA CHECKLIST FOR WASTE MAAGEMET IFRASTRUCTURE TO ASSESS THE STATUS OF PLAIG/PROGRAMMIG OF THE PROJECT PIPELIE te: The starting pint fr an accessin-driven envirnmental investment prgramme is a systematic
More informationImproving Embedded Test Value ROI Is King! Ian F. Smith Newell & Budge Ltd.
Imprving Embedded Test Value ROI Is King! Ian F. Smith Newell & Budge Ltd. Imprving embedded test value ROI is King!! Ian F. Smith 30 Nvember 2005 EurSTAR 2005 Cpenhagen, Denmark www.slayer.cm Cpyright
More informationOrange, the leading Internet service provider, grows in apps traffic
Web Trends Orange, the leading Internet service prvider, grws in apps traffic With mre than ne-third f visits t websites and applicatins in France, Orange is the leading Internet service prvider and increases
More informationCountry profiles: Iceland
Cuntry prfiles: Iceland Last updated: 26/06/2015 1 Implementatin f Tracking Systems 1.1 Electricity Disclsure Electricity disclsure in Iceland is implemented by Regulatin number 757/2012, Regulatin n disclsure
More informationA Comparison of Different Age-of-Dam and Sex Correction Factors for Birth, Weaning and Yearling Weights in Beef Cattle
A Cmparisn f Different Age-f-Dam and Sex Crrectin Factrs fr Birth, Weaning and Yearling Weights in Beef Cattle Carla G. Chenette and R. R. Frahm Stry in Brief Preweaning perfrmance recrds f 2747 Angus
More informationCenter for Energy Research at UNLV. Villa Trieste Homes Building Reduced-Energy Homes in the Southwest U.S. Desert
at UNLV Villa Trieste Hmes Building Reduced-Energy Hmes in the Suthwest U.S. Desert Reduced Peak Energy Hmes (2008 t 2013) UNLV s (CER) received a very large cntract frm the U.S. Department f Energy fr
More informationLeast developed countries (LDCs) Less economically developed countries (LEDCs) Newly industrialising countries (NICs) Middle income countries (MICs)
Least develped cuntries (LDCs) Less ecnmically develped cuntries (LEDCs) Nrth-suth divide lineshwing the rich and pr. LDCs- These are the prest cuntries with the lwest quality f life. LEDCs- These are
More informationBROCHURE # 50 DOES MY BUILDING DESIGN NEED ENGINEERING?
BROCHURE # 50 DOES MY BUILDING DESIGN NEED ENGINEERING? Overview Building cnstructin has becme increasingly cmplex during the last tw decades. Buildings are larger and use new materials and cnstructin
More informationCHP, thermal storage & thermal networks, and the interaction with the electric and gas grids. William D haeseleer KU Leuven Energy Institute Belgium
CHP, thermal strage & thermal netwrks, and the interactin with the electric and gas grids. William D haeseleer KU Leuven Energy Institute Belgium Philsphical Questin Why d we see a scietal tendency t mve
More informationRenewable Portfolio Standards: Costs and Benefits
Renewable Prtfli Standards: Csts and Benefits Lri Bird, NREL Renewable Energy Markets December 4, 2014 C-authrs: J. Heeter 1, G. Barbse 2, S. Weaver 2, F. Flres 1, K. Kuskva-Burns 1, and R. Wiser 2 1 Natinal
More informationCDM Plan Submission and Review Criteria Rules
Cnservatin First Framewrk LDC Tl Kit Final v4.0 January 17, 2018 CDM Plan Submissin and Review Rules 1) Purpse and definitins 1.1 These Rules set ut: a) the rles, respnsibilities and timing fr CDM Plan
More informationCASE FOR GOING BEYOND BUILDING CODE
Suite 540, 840 Sixth Avenue SW, Calgary, Alberta, T2P 3E5 Edmntn s Energy Transitin Plan (ETP) CASE FOR GOING BEYOND BUILDING CODE 31 st January 2014 Richard Byd and Karen Grecki INTRODUCTION CONTEXT The
More informationExperimental Study on Heat Transfer and Resistance Performance of Elliptical Finned Tube Heat Exchanger with Different Air Entrance Angles
Experimental Study n Heat Transer and Resistance Perrmance Elliptical Finned Tube Heat Exchanger with Dierent Air Entrance Angles Xueping Du 1, Min Zeng 1, Qiuwang Wang 1*, Zhayi Dng 2 1 Key Labratry Thermal
More informationCaseMaster Evolution Spare Your Time, Save Your money when carburizing within state of the art furnace
CaseMaster Evlutin Spare Yur Time, Save Yur mney when carburizing within state f the art furnace www.secwarwick.cm.pl/evlutin PRESENT GENERATION OF SEALED QUENCH FURNACES ecnmic generatin f sealed quench
More informationEFFECTS OF NON-UNIFORM AIRFLOW DISTRIBUTION ON GRAIN MOISTURE CONTENTS DURING AERATION
EFFECTS OF NON-UNIFORM AIRFLOW DISTRIBUTION ON GRAIN MOISTURE CONTENTS DURING AERATION Desmnd Essien, Richard Bani and Edward Sabi Department f Agricultural Engineering, University f Ghana, Legn, Ghana
More informationReport on Inspection of Grant Thornton LLP (Headquartered in Chicago, Illinois) Public Company Accounting Oversight Board
1666 K Street, N.W. Washingtn, DC 20006 Telephne: (202) 207-9100 Facsimile: (202) 862-8433 www.pcabus.rg Reprt n 2013 (Headquartered in Chicag, Illinis) Issued by the Public Cmpany Accunting Oversight
More information1. Why can I modify a purchase requisition although I set the changeability of the release indicator to '1' ('Cannot be changed')?
Nte Language: English Versin: 10 Validity: Valid Since 25.08.2009 Summary Symptm FAQ Release Strategy List f questins : 1. Why can I mdify a purchase requisitin althugh I set the changeability f the release
More informationCAPIEL Position Paper - RoHS Scope
CAPIEL Psitin Paper - RHS Scpe 1 - Purpse f this paper The purpse f this CAPIEL paper is t help manufacturers t determine whether r nt the prducts they place n the market fall within the scpe f the recast
More informationAccelerated ageing of a stabilised/ solidified contaminated soil at elevated temperatures. Burden Chitambira
Accelerated ageing f a stabilised/ slidified cntaminated sil at elevated temperatures Burden Chitambira Outline West Draytn site Shrt-term labratry tests Accelerated ageing Experimental Results Cnclusin
More informationConnect for SAP (Classic)
Cnnect fr SAP (Classic) Fact Sheet 1 Abut Cnnect fr SAP (Classic) Cnnect fr SAP is an bject-riented sftware library. It has been specially designed fr an access t SAP applicatin servers by using Embarcader
More informationCHAPTER ELEVEN LIQUID AND EMULSIFIED ASPHALT ITEMS
CHAPTER ELEVEN LIQUID AND EMULSIFIED ASPHALT ITEMS 11 LIQUID AND EMULSIFIED ASPHALT ITEMS 1 1 OVERV IEW All Liquid and emulsified asphalt items have a unit f measure (UOM) f tns r square yards. All liquid
More informationAvailable online at Energy Procedia 1 (2009) (2008) GHGT-9
Available nline at www.sciencedirect.cm Energy Prcedia 1 (2009) (2008) 2857 2861 000 000 Energy Prcedia www.elsevier.cm/lcate/prcedia www.elsevier.cm/lcate/xxx GHGT-9 Implementing CCS in Eurpe: ZEP s Visin
More informationOracle Revenue Management and Billing. Version Release Notes. Revision 1.1
Oracle Revenue Management and Billing Versin 2.5.0.2.0 Release Ntes Revisin 1.1 E72808-01 April, 2016 Release Ntes Oracle Revenue Management and Billing Versin 2.5.0.2.0 Release Ntes E72808-01 Cpyright
More informationSeattle Public Schools The Office of Internal Audit
Seattle Public Schls The Office f Internal Audit Internal Audit Reprt September 1, 2013 thrugh August 31, 2016 Issue Date: June 13, 2017 Backgrund Infrmatin Executive Summary The District emplys apprximately
More informationBUSINESS PLAN CEN/TC 144 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY
Page: 1 BUSINESS PLAN CEN/TC 144 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Descriptin f the Business Envirnment The fllwing plitical, ecnmic, technical,
More informationFlood Water Barriers Inflow Protection. Flood Protection Barriers Flood Protection Walls. Blobel Environmental Engineering 3
Fld Water Barriers Inflw Prtectin Fld Prtectin Barriers Fld Prtectin Walls Blbel Envirnmental Engineering 3 Blbel Envirnmental Engineering Blbel Envirnmental Engineering State f the Art Fld Prtectin Systems
More informationAs the electricity grid becomes more decarbonised the UK will need more energy storage.
APPG n Energy Strage Event Ntes Ntes frm event: Building energy strage, creating energy security APPG n Energy Strage, 10:00am in the Attlee Suite, Prtcullis Huse Key Pints Panel Greater amunts f energy
More informationAIM BRIEFING PAPER CONSIGNMENT STOCK APRIL 2011 ASSOCIATION DES INDUSTRIES DE MARQUE EUROPEAN BRANDS ASSOCIATION EUROPÄISCHER MARKENVERBAND
ASSOCIATION DES INDUSTRIES DE MARQUE EUROPEAN BRANDS ASSOCIATION EUROPÄISCHER MARKENVERBAND AIM BRIEFING PAPER CONSIGNMENT STOCK APRIL 2011 9 AVENUE DES GAULOIS B-1040 BRUSSELS BELGIUM TEL +322 7360305
More informationMECHANICAL PROPERTIES AND CORROSION CHARACTERISTICS OF IS400/12 GRADE DUCTILE IRON
MECHANICAL PROPERTIES AND CORROSION CHARACTERISTICS OF IS400/12 GRADE DUCTILE IRON N. D. Prasanna*, M. K. Muralidhara* Mhit Kumar Agarwal* and K. Radhakrishna** *Dept. f Mech.Engg., M. S. Ramaiah Institute
More informationNJDEP PROPOSES TO CHANGE FLOOD HAZARD AREA CONTROL ACT RULES
NJDEP PROPOSES TO CHANGE FLOOD HAZARD AREA CONTROL ACT RULES NJDEP has prpsed far-reaching regulatins which culd effect stream encrachment wetlands and buffers alng streams and tidal areas. Key highlights
More informationWL123 HIGH-PERFORMANCE PE4710
What is High-Perfrmance PE4710 Plyethylene? High-perfrmance plyethylene is an imprved plyethylene cmpund fr pressure pipe that is designated PE4710. Cmpared t cnventinal pressure piping materials such
More information(1) Is seawater normally an oxidizing or reducing medium? Oxidizing
Lecture 11 Diagenesis, Redx Chemistry Organic C Preservatin (1) Is seawater nrmally an xidizing r reducing medium? Oxidizing Write the xidatin numbers fr all f the atms in the fllwing cmpunds: N 2 ; NO
More informationENERGY STORAGE-OTHER THAN BATTERY
ENERGY STORAGE-OTHER THAN BATTERY 1 Binda Nand Das 2 Aditya Kumar Dash 1,2 Sr. Asst. Prfessrs Mechanical Engg. Dept. RVSCET, Jamshedpur Intrductin Nn- cnventinal energy surces like Slar, Wind, Tidal, Ge-thermal
More informationThe Total Economic Impact Of IBM s Worklight Platform
A Frrester Ttal Ecnmic Impact Study Prepared Fr IBM The Ttal Ecnmic Impact Of IBM s Wrklight Platfrm Cst Savings In The Develpment And Maintenance Of Multiplatfrm Mbile Apps Prject Directr: Jan ten Sythff
More informationTopics on Heavy Oil. Production and Processing
One-Day Wrkshp n Heavy Oil Tpics n Heavy Oil Prductin and Prcessing Organizer: Oil and Gas Exp 2015 http://il-gas.micsgrup.cm/ Speaker: Prf. M. R. Riazi www.riazim.cm Venue: Crwn Plaza Dubai - UAE http://www.ihg.cm/crwneplaza/htels/gb/en/dubai/dubtc/hteldetail
More informationCMG GardenNotes #265 Methods to Schedule Home Lawn Irrigation
CMG GardenNtes #265 Methds t Schedule Hme Lawn Irrigatin Outline: Irrigatin scheduling, page 1 Sprinkler-type methd, page 2 Precipitatin rate methd, page 3 Adding cycle and sak features, page 5 Observatin
More informationOptions for evaluating context-based adaptations of an adaptive collaboration environment 1
Optins fr evaluating cntext-based adaptatins f an adaptive cllabratin envirnment 1 Jerg M. Haake Fakultät für Mathematik und Infrmatik FernUniversität in Hagen 58084 Hagen Germany jerg.haake@fernuni-hagen.de
More informationGraduate Student Seminar Symposium, ENGI 9100
Dynamic Mdeling and Simulatin f a Small Wind-Fuel Cell Hybrid Energy System Graduate Student Seminar Sympsium, ENGI 9100 December 3, 2003 M. J. Khan, mjakhan@engr.mun.ca Faculty f Engineering & Applied
More informationApplication Portfolio Analysis: Tool for Cloud Migration Dr. Gopala Krishna Behera December 5, 2017
Applicatin Prtfli Analysis: Tl fr Clud Migratin Dr. Gpala Krishna Behera December 5, 2017 Tday, a majrity f custmers are getting ut f the data center business and mving twards the use f Clud Services.
More informationMonitoring, Evaluation and Adaptive Management Following INFFER Assessment (INFFER step 7)
Mnitring, Evaluatin and Adaptive Management Fllwing INFFER Assessment (INFFER step 7) www.inffer.rg David Pannell, Geff Park, April Curatl, Anna Rberts, Stephanie Spry, Sally Marsh Intrductin The Investment
More informationRedeployment Due to Ill Health
Redeplyment Due t Ill Health Guide fr managers This guide utlines steps t fllw when managing an emplyee thrugh the redeplyment prcess due t ill health Main tpic areas Overview General principles The prcess
More informationOracle In-Memory Logistics Command Center on Oracle Engineered Systems Maximize Performance of your Logistics Network
An Oracle Applicatins White Paper April 2013 Oracle In-Memry Lgistics Cmmand Center n Oracle Engineered Systems Maximize Perfrmance f yur Lgistics Netwrk Disclaimer The fllwing is intended t utline ur
More information