Overview: College of Polymer Science and Polymer Engineering
|
|
- Violet Curtis
- 6 years ago
- Views:
Transcription
1 Overview: College of Polymer Science and Polymer Engineering Paula Watt, Ph.D. Director of Outreach College of Polymer Science and Polymer Engineering
2 Polymers and Composites are ideal for lightweighting strategies : Favorable strength to weight ratio Wide range of capabilities and properties Design flexibility Integrated functionality Optimization through multi-material system design
3 Legacy in Polymer Discovery, Innovation, Talent Dr. Charles Knight ( ) Gave first semester-long class on polymers in the world in 1910 called Chemistry of India Rubber Strong, Lightweight, Impact Resistant, Functional, Cheap, Reliable Polymers represent a trillion dollar industry world-wide
4 COLLEGE OF POLYMER SCIENCE AND POLYMER ENGINEERING Established 1988 Polymer Science Faculty 21 Polymer Engineering Faculty 12 Graduate Students Polymer Science 195 Polymer Engineering 156 Buildings Goodyear Polymer 1991 Polymer Engineering Academic 2001 Olson Engineering Research 1979 Akron Polymer Training 1993 National Polymer Innovation 2010
5 For Ohio the polymer industry is the largest manufacturing sector with over 130,000 jobs Polymer Valley of Northeast Ohio has 2,400 polymer related companies 50% of North American plastics processing is within a 250 mile radius of Akron Rubber Ohio #1 Coatings Ohio #1 Plastics Ohio #2 Ohio is consistently in the top five states in polymer industry market segments: Coated and Laminated Paper Manufacturing, Inorganic Dye and Pigment Manufacturing, Synthetic Inorganic Dye and Pigment Manufacturing, Plastics Material and Resin Manufacturing, Synthetic Rubber Manufacturing, Adhesive Manufacturing, Printing Ink Manufacturing, Custom Compounding of Purchased Resins, Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing, Unlaminated Plastics Profile Shape Manufacturing, Plastic Pipe and Pipe Fitting Manufacturing, Laminated Plastics Plate, Sheet (except Packaging) and Shape Manufacturing, Polystyrene Foam Product Manufacturing, Urethane and Other Foam Product (except Polystyrene) Manufacturing, Tire Manufacturing (except Retreading), Tire Retreading, Rubber and Plastics Hoses and Belting Manufacturing, Rubber Product Manufacturing for Mechanical Use, Plastics and Rubber Industry Machinery
6 Beyond Ohio: National and International Reach International reach reflects student origins and global polymer industry Supportive alumni are active in Taiwan, Korea, China, and India Graduates contribute in Polymer Valley of Northeast Ohio and in polymer related industries nationally
7 Interdisciplinary Collaborative Faculty MISSION: INVENT, INNOVATE, MANUFACTURE MATERIALS AND DEVICES Photovoltaic devices Optical compensation films Core shell nanostructures Nanogels Polymer nanocomposites Shape memory polymers Magnetic nanoparticles Aerogels Mesoporous carbon materials Novel coating materials Thin films Antibacterial coatings Thermoelectric devices Self-powered electronics Bio-materials Biomedical materials PROCESSING/MANUFACTURING Microlayer coextrusion Ink jet printing Stretching with structural-control Nanolithography Holographic multi-beam polymerization Nanoscale filler dispersion by ultrasound and chaotic mixers Block copolymer lithography Hybrid processing Electro-spinning R2R processing Field alignment Zone annealing Ice-phobic surfaces Patterning; 3-D printing CHARACTERIZATION AND MODELING Nano-Raman spectroscopy X-ray reflectivity Multilayer film layer uniformity and interface quality AFM; TEM; Inorganic-organic interfaces Force fields for interfacial properties MD simulation of chain molecules Surface force analysis of nanoscale bio materials Nanoscale tribology Lipid membranes and proteins Mold filling analysis
8 Polymer Modeling and Visualization Center New in 2016
9 Additive Manufacturing Laboratory New in 2017
10 Akron Polymer Technology Services Workforce Development Training Since 1993 we have been providing non-degree workforce training through our Akron Polymer Technology Services organization. Customized Training Programs Akron Polymer Technology Services specialize in development and delivery of courses and workshops specific to a company s needs. Course Offering Examples Silicone Elastomers Technology and Fabrication Seminar - 4 Day Course Polyurethane Elastomers: Chemistry, Applications and Formulations - 1 Day Course Systematic Innovation for Six Sigma Black Belts and Lean Masters: An Introduction - 2 Day Course Over 2500 individuals, from 900 companies, have used our training services since 2002.
11 Akron Polymer Technology Services With a full-time professional staff, and a half-million dollar inventory of modern instrumentation, the Testing Center is dedicated to performing sophisticated and timely contractual technical services for industrial and government clients. In addition to dedicated resources maintained by the Center, the laboratory has access to highly sophisticated instrumentation through the College of Polymer Science and Polymer Engineering, and will interface with over 30 highly specialized faculty to solve more complex polymer related problems. Contract Services Fast Turnaround Confidentiality Professional Staff
12 Akron Polymer Technology Services The Polymer Processing Center offers the capability for experimentation and pilot level process trials for a variety of plastics processing techniques, including: Compounding, blending and mixing Film blowing Injection, compression and vacuum molding Roll to Roll casting and extrusion Coating Additive manufacturing
13 National Polymer Innovation Center
14 Akron Functional Materials Center Bio-medical Materials Coatings and Adhesives Additive Manufacturing Energy and Electronics Polymer Assembly
15 Some Current Research Partners and Sponsors?
16 Professional Masters Coursework focused Masters degree in Polymer Science and Engineering with integrated professional courses in business, law, and engineering Rationale There are a range of non-research positions for which a polymer technical background would be very useful Surveys of industry executives and technical staff suggest a professional MS with business and law components would be viewed favorably Trends outside UA Other schools starting Professional MS degrees in Engineering and Science include Rice, U. Penn, CWRU, Virginia Tech None of these currently compete in the polymers area Structure 18 polymer credits in chemistry, characterization, processing, and technology 12 business and law credits, core courses and electives in finance, project management, supply chain, intellectual property, compliance Instruction on research methods and communications; no thesis requirement First entering class in Fall 2017
17 SPE THERMOSET DIVISION 2017 ANNUAL TOPICAL CONFERENCE Technical Agenda Experts in the Raw Material space Processing Innovations Market Updates Exhibit & Sponsorship Opportunities Social Activities to Promote Collaboration Logon to for more information The Scottsdale Resort at McCormick Ranch MARCH 2017
18 Questions
CUSTOM COMPOUNDING & TOLLING BUSINESS UNIT. Ron Smolenski Business Unit Manager. Anne Lawson Technical Liaison Manager
CUSTOM COMPOUNDING & TOLLING BUSINESS UNIT Ron Smolenski Business Unit Manager Anne Lawson Technical Liaison Manager Mission Statement SACO AEI Polymers Custom Compounding and Tolling Business Unit is
More informationGraduate Program Curriculum Outline Cooperative Education Option in Plastics Engineering Master of Science in Plastics Engineering
Graduate Program Curriculum Outline Master of cience in Plastics Engineering Maj Required (Ce) Courses (Total # of courses required = 8) Course Number Course Title Credit Hours PLA.5030 PLA.5440 PLA.5780
More informationFocus on: FEP. Fluoropolymers. FEP in the fluoropolymer family.
TECHNICAL WHITEPAPER ocus on: EP Introduction Continuing our series of looking at the members of the fluoropolymer family in detail, this month we focus on EP (fluoroethylene-propylene). EP is a copolymer
More informationMilitary Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine
More informationYour imagination, our manufacturing excellence.
Your imagination, our manufacturing excellence. Product Line Descriptions Pan Technology offers a line of solid chip pigmented dispersions unlike any other colorant house. Pound for pound, chip dispersions
More informationAC : ROAD TO NANO-TECHNOLOGY EDUCATION IN ENGINEERING TECHNOLOGY: AN AREA OF INTERDISCIPLINARY STUDIES
AC 2007-1087: ROAD TO NANO-TECHNOLOGY EDUCATION IN ENGINEERING TECHNOLOGY: AN AREA OF INTERDISCIPLINARY STUDIES Jinwen Zhu, Missouri Western State University JINWEN ZHU, Ph.D., is Assistant Professor of
More informationTERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE
TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot
More informationNanoimprinting in Polymers and Applications in Cell Studies. Albert F. YEE Chemical Engineering & Materials Science UC Irvine
Nanoimprinting in Polymers and Applications in Cell Studies Albert F. YEE Chemical Engineering & Materials Science UC Irvine Presentation outline Motivation Reversal imprinting Soft inkpad imprinting on
More informationDr. Priyabrat Dash Office: BM-406, Mob: Webpage: MB: 205
Email: dashp@nitrkl.ac.in Office: BM-406, Mob: 8895121141 Webpage: http://homepage.usask.ca/~prd822/ MB: 205 Nonmanufacturing In continuation from last class... 2 Top-Down methods Mechanical-energy methods
More informationDevelopment of Biomaterials & Devices from Renewable Resources
Development of Biomaterials & Devices from Renewable Resources Prof. Dr. Marie-Pierre Laborie Dr. ir. Pieter Samyn Institute for Forest Utilization and Works Science Werthmannstrasse 6 79085 Freiburg im
More informationAtmospheric plasma technology for surface modification of nanoparticles
9/16/2011 Atmospheric plasma technology for surface modification of nanoparticles Dirk Vangeneugden - COST Meeting, Espoo, Finland, 15-16/09/2011 Contents Introduction to VITO Developed atmospheric plasma
More informationDepartment of Physics and Nanotechnology Program: B. Tech. (Open Elective) Course file
Department of Physics and Nanotechnology Program: B. Tech. (Open Elective) Course file NT1201APPLICATIONS OF NANOTECHNOLOGY Table of Contents 1. Syllabus of NT1201APPLICATIONS OF NANOTECHNOLOGY 2. Academic
More informationRory A. Wolf, Enercon Industries Corporation Amelia Sparavigna, Dipartimento di Fisica, Politecnico di Torino
MODIFYING SURFACE FEATURES Extrusion Coating and Lamination Rory A. Wolf, Enercon Industries Corporation Amelia Sparavigna, Dipartimento di Fisica, Politecnico di Torino Abstract Extrusion coating, lamination
More informationSports & Recreation. Innovative Polymer Solutions for Footwear Applications. A Bit More Amazing. Lubrizol Engineered Polymers
Sports & Recreation Innovative Polymer Solutions for Footwear Applications A Bit More Amazing Lubrizol Engineered Polymers Footwear Lubrizol, An Essential Ingredient Lubrizol is a global technology company
More informationOSU MATERIALS RESEARCH SEED GRANT PROGRAM AWARDS
2011-2012 OSU MATERIALS RESEARCH SEED GRANT PROGRAM AWARDS This Winter, the new OSU Materials Research Seed Grant Program was established as an enhanced seed program unifying the primary internal research
More informationPerformance and productivity.
Product Comparison Guide 3M Dynamar Polymer Processing Additives Performance and productivity. Proven technology from 3M, engineered for a smoother extrusion process from start to finish. Improve processing
More informationأت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh
Basic Workshop 1 أت ارش There are thousands of materials available for use in engineering applications. Most materials fall into one of three classes that are based on the atomic bonding forces of a particular
More informationSelf Assembled Heterojunction Solar Cell Active Layers: CFN/USB/CAT Collaboation
Self Assembled Heterojunction Solar Cell Active Layers: CFN/USB/CAT Collaboation Supported in part by the SensorCat program at NYSTAR,NSF-MRSEC Jennifer A. Segui PhD student in Biomedical Engineering.
More informationIntermediates. Expand your success on elastomers: PolyTHF
Intermediates Expand your success on elastomers: BASF The Chemical Company BASF is the world s leading chemical company: The Chemical Company. Its portfolio ranges from chemicals, plastics, performance
More informationTable of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN:
Table of Contents Robert A. Malloy Plastic Part Design for Injection Molding An Introduction ISBN: 978-3-446-40468-7 For further information and order see http://www.hanser.de/978-3-446-40468-7 or contact
More informationTom Connelly Executive Vice President & Chief Innovation Officer Industrial Biosciences and Performance Materials
Tom Connelly Executive Vice President & Chief Innovation Officer Industrial Biosciences and Performance Materials 1 Research and Development 2 Science is the Growth Engine for the Company Agriculture &
More informationFascinated by Excellence
CREATING TOMORROW`S SOLUTIONS Date 0 of 22 WACKER Ranks Among the Pioneers of Modern Chemistry Founded in 1914 Today a technology leader in semiconductors, polysilicon production, and silicone and polymer
More informationMold Design Guide. Geon Vinyl Molding Compounds
Mold Design Guide Geon Vinyl Molding Compounds Mold Design Guide For Geon Vinyl Rigid Molding Compounds Table of Contents INTRODUCTION....................................................2 MATERIAL SELECTION.............................................3
More informationAn Introduction to Sourcing the Optimal Elastomer
Produced by: Engineering 360 Media Solutions January 2017 An Introduction to Sourcing the Optimal Elastomer Sponsored by: The Hygenic Corporation Written by: Crystal Duncan Are you designing a new product
More informationTri-State Shale Coalition: Shale & Downstream Development
Tri-State Shale Coalition: Shale & Downstream Development Utica Summit, Canton, OH October 11, 2017 Paul Boulier Vice President, Industry & Innovation Team NEO Shale Gas Yields Many Products Power Consumer
More informationAdvances in Twin Screw Compounding Technology
Advances in Twin Screw Compounding Technology Extrusion technology from micro to production scale Ing. Manfred Dobersberger 19.08.2011 Labor- and Pilotanlagen für die Kunststoffverarbeitung, Dr. Collin
More informationSoft, Processable SEBS Polymers for Compounds
Back to Index Soft, Processable SEBS Polymers for Compounds Dale Handlin Ph.D., Ching Ting Ph.D., Ziv Cheng, and Parashar Davé TSRC-Dexco Polymers, Plaquemine, LA, USA Abstract Two of the important trends
More informationPolypropylene engineered for a wide variety of applications
Polypropylene engineered for a wide variety of applications Injection Molding Blow Molding Extrusion Thermoforming Sheet Extrusion Total Petrochemicals USA, Inc. is one of the world s leading producers
More informationINTRODUCTION. Table 1. Typical applications for LDPE and Ateva EVA copolymers. Category Typical Applications Advantages
INTRODUCTION Low-density polyethylene is produced through the polymerization of ethylene by a high-pressure process. Ateva EVA copolymers are produced but copolymerizing ethylene (E) with vinyl acetate
More informationJUST ADD LIQUID Quick guide to ColorMatrix liquid color for plastics and silicones
JUST ADD LIQUID Quick guide to ColorMatrix liquid color for plastics and silicones THE RIGHT COLORANT FOR YOU Understanding which colorant technology best suits your particular product application will
More informationWhat Polyurethane Where? Selecting the Right Polyurethane Elastomer for the Application
What Polyurethane Where? Selecting the Right Polyurethane Elastomer for the Application 1 Overview Types of Polyurethane Materials Cast urethane examples and applications Cast Urethane Elastomers Benefits
More informationPackaging Technology
The Essential Seminar Fundamentals of Packaging Technology Seminar Fundamentals of Packaging Technology is divided into semesters to give you maximum flexibility in taking the seminar. 1. Take the entire
More informationManufacturing Technologies University of Rome Tor Vergata
Manufacturing Tech (6 cr) + Metallurgy (3 cr) Initial introduction (1 week) Timetable 6 credits (54-60 h) End of the course: 28 giugno Type of examination Written test Oral test (mandatory) Average of
More informationCharting a Pathway for Nanotechnology in Engineering Technology Education
Session ENT 106-090 Charting a Pathway for Nanotechnology in Engineering Technology Education Jinwen Zhu, Virendra Varma Department of Engineering Technology Missouri Western State University jzhu@missouriwestern.edu,
More informationKoresin The tackifier for the rubber industry
Koresin The tackifier for the rubber industry The connecting power of Koresin Koresin is the industry benchmark with regard to superior tack performance processing flexibility reliability high quality
More informationquantum energy and sustainable solar technologies
quantum energy and sustainable solar technologies NSF/DOE ENGINEERING RESEARCH CENTER Generating sustainable power by using photovoltaic technologies to harness today s unlimited sunshine the qesst QESST
More informationPolyurethane Adhesives and Sealants Based on Hydrophobic Polyols
Polyurethane Adhesives and Sealants Based on Hydrophobic Polyols Adam Colson Amber Stephenson Nita Xu Wenwen Li Bindu Krishnan The Dow Chemical Company 2301 N. Brazosport Blvd Freeport, TX 77541 ABSTRACT
More informationTapes. Reliable. Solar Industry. for the. 3M Tapes for Solar Panel Fabrication
3M Tapes for Solar Panel Fabrication Reliable Tapes for the Solar Industry More than 80 years ago, 3M invented the world s first practical pressure-sensitive tapes. Today, we are a leading manufacturer
More informationwww.reedychemicalfoam.com FOAMS 2016 Kinetic Nucleators maximize cell distribution in foam extrusion September 14-15, 2016 2 1. Why Use Chemical Foam? 2. CFA types 3. Modern CFA Expectations 4. Nucleation
More informationChapter 19. Forming and Shaping Plastics and Composite Materials
Chapter 19 Forming and Shaping Plastics and Composite Materials Characteristics of Forming and Shaping Processes for Plastics and Composite Materials Forming and Shaping Processes for Plastics, Elastomers,
More informationVibration Exposure Analysis of the Polysiloxane Reinforced with Rice Husk Silica. and Nurul Emi Nur Ain Mohammad 1,d
Applied Mechanics and Materials Vol. 660 (2014) pp 531-535 Submitted: 22.07.2014 (2014) Trans Tech Publications, Switzerland Revised: 06.08.2014 doi:10.4028/www.scientific.net/amm.660.531 Accepted: 12.08.2014
More informationSUCCESS ROOTED IN PARTNERSHIP TM
SUCCESS ROOTED IN PARTNERSHIP TM SALES & DISTRIBUTION FLAME RETARDANT SOLUTIONS PHLAMOON EXTINITY Powders & Liquids Concentrates & Masterbatches Customized Solutions AESSE Sales & Distribution Your Success
More informationLarge Area Functional Surfaces By Roll-to-Roll Nanoimprint Lithography Project: APPOLO
Large Area Functional Surfaces By Roll-to-Roll Nanoimprint Lithography Project: APPOLO Mr. Theodoros Tachtsidis Nanotypos 23rd and 24th of June Amsterdam Core Overview Nanotypos is a pioneering research
More informationMAKING PROPERTIES AND PROFITS
AKING PROPERTIES AND PROFITS Twin-Screw Extrusion Seminar September 13-14, 2017 Seminar Leader: Adam Dreiblatt Akron Polymer Technology Services Akron, OH Program Overview This two-day seminar focuses
More information1/31/ Plastics Processing. Thermoplastics (Tampere)
1/31/2012 1 Plastics Processing Thermoplastics (Tampere) 1/31/2012 2 Plastics processing Micro-scale melt processing Small Scale Processing Pilot Scale Processing Injection Moulding Extrusion Pre- and
More informationPRESSURE-SENSITIVE ADHESIVES
INTRODUCTION TO PRESSURE-SENSITIVE ADHESIVES WORKSHOP MARCH 19-20 AMSTERDAM, THE NETHERLANDS 2018 - IN COOPERATION WITH CHEMSULTANTS INTERNATIONAL WORKSHOP SPONSOR CLICK HERE TO REGISTER The Introduction
More informationAC : HANDS-ON PLASTIC PROCESSING FOR A LEAN-MANUFACTURING PROJECT
AC 2009-244: HANDS-ON PLASTIC PROCESSING FOR A LEAN-MANUFACTURING PROJECT Dave Kim, Washington State University, Vancouver Yongha Kim, Washington State University, Vancouver American Society for Engineering
More informationMastering Corona Treaters, Roll Coverings, & Electrodes for Extrusion Film Lines
Mastering Corona Treaters, Roll Coverings, & Electrodes for Extrusion Film Lines Today s presenters Aaron Hootkin Regional Sales Manager Tom Gilbertson VP Application Engineering Seminar Overview Surface
More informationNanomaterials Research. Forest Products Laboratory. at the Forest Products Laboratory. Ron Sabo Jerry Winandy Ted Wegner.
Nanomaterials Research at the Forest Products Laboratory Ron Sabo Jerry Winandy Ted Wegner US Forest Service Forest Products Laboratory Madison, WI USA USDA Forest Service Mission Sustain the health, diversity,
More informationGenesis of Friction between Macroscale contacts. Reference: Chapter 3 of the text books
Genesis of Friction between Macroscale contacts Reference: Chapter 3 of the text books What is friction? F = W s µ varies as a function of the sliding distance. 1 0.6 0.2 0 0 20 40 60 80 Di stan ce slid
More informationLloyd Whitman Deputy Director Center for Nanoscale Science and Technology
Nanotechnology at NIST Lloyd Whitman Deputy Director Center for Nanoscale Science and Technology whitman@nist.gov Nanotechnology Innovation Summit December 8, 2010 NIST Nanotechnology Mission: To promote
More informationmetallic stearates (metal salts/soaps)
metaic stearates (metal salts/soaps) Metaic stearates have been utilized in the rubber industry a long time. The primary functions of metaic stearates are their ability to prevent rubber from sticking
More informationEnhanced Response from Engineered Nano Treated Peizofilm
Enhanced Response from Engineered Nano Treated Peizofilm By Sai Narayan Sundar Advisor Dr J.P Sharma Dept. of Mechanical Engineering University of Mississippi i: flow of current due to piezo deformation
More informationSilicone Elastomers for Medical Device Applications. Application and Product Selection Guide. Proven. Performance.
Silicone Elastomers for Medical Device Applications Application and Product Selection Guide Proven. Performance. How can we help you today? Dow Corning and Silastic silicone elastomers for medical device
More informationSelf-plasticised PVC compounds New materials for a more sustainable future
Self-plasticised PVC compounds New materials for a more sustainable future Dr. Belén Pascual, Head of R&D Miquel Boix, Head of R&T Ercros Plastics Division September 2014 Plastic Division Production Capacities
More informationNano-Scale Manufacturing:
The Second U.S.-Korea Forum on Nanotechnology: Nanomanufacturing Research and Education Nano-Scale Manufacturing: Top-down, Bottom-up and System Engineering Cheng Sun, Xiang Zhang Center of Scalable and
More informationSoft Lithography. Jin-Goo Park. Materials and Chemical Engineering Hanyang University, Ansan. Electronic Materials and Processing Lab.
Hanyang University Soft Lithography Jin-Goo Park Materials and Chemical Engineering Hanyang University, Ansan Electronic Materials and Processing Lab. Introduction to Soft Lithography Research Micro- Electro-
More informationIran Advancing Nanotechnology in Solar Energy and Biomedical Applications
Iran Advancing Nanotechnology in Solar Energy and Biomedical Applications Highlight of 3 rd International Conference on Nanostructures, Mar.10 12, 2010, Kish Island, Iran Abstract: This article highlights
More informationThe Swedish Foundation for Strategic Research calls for proposals for research group grants for research in Materials Science
27 June 2008 The Swedish Foundation for Strategic Research calls for proposals for research group grants for research in Materials Science The Foundation calls for proposals for five-year research group
More informationContinuous Process Improvement
Continuous Process Improvement How to Improve Process Quality, Productivity & Performance By Ronald M. Mayfield, Technical Manager, HEXPOL Compounding White Paper Abstract The concept of continuous improvement
More information2013 Thermoplastic Elastomer Conference Oct. 16, 2013 Dusseldorf, GmbH. VECTOR & Taipol Styrenic Block Copolymers
A New Family of VECTOR Styrenic Block Copolymers for the Personal Care & Hygiene Market Low Styrene, Styrene-Butadiene-Styrene (LS-SBS) Triblock Copolymers* 2013 Thermoplastic Elastomer Conference Oct.
More informationA Technology Decision Adhesive Lamination or Extrusion Coating/Lamination?
A Technology Decision Adhesive Lamination or Extrusion Coating/Lamination? Rory Wolf, Enercon Industries Corporation Abstract Extrusion-based coating/laminating and adhesive-based film laminating are different
More informationInnovative Thermoplastic Elastomers with Functional Performance
Innovative Thermoplastic Elastomers with Functional Performance Guoqiang (Jerry) Qian, Gerry Meyer, Krishna Venkataswamy Presenter: Philippe Julien-Labruyère July 2012 PolyOne Corporation GLS Thermoplastic
More informationHYBRID MOULDS - THERMAL ASPECTS
DEPARTMENT OF MATERIALS, TEXTILES AND CHEMICAL ENGINEERING HYBRID MOULDS - THERMAL ASPECTS Prof. Ludwig Cardon 2017 October DEPARTMENT OF MATERIALS, TEXTILES AND CHEMICAL ENGINEERING POLYMER, FIBER AND
More informationFiber spinning of biopolymers containing nanowhiskers : Possibilities and challenges
Fiber spinning of biopolymers containing nanowhiskers : Possibilities and challenges Aji P. Mathew and Kristiina Oksman Wood and Bionanocomposites, Division of Materials Science Luleå University of Technology,
More informationIN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS
IN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS Stefan Epple, Institut für Kunststofftechnik, University of Stuttgart, Germany Christian Bonten, Institut für Kunststofftechnik, University of Stuttgart,
More informationColour and Additive Preparations. for Extruded Polyolefin Foams
Colour and Additive Preparations for Extruded Polyolefin Foams COLOUR AND ADDITIVE PREPARATION FOR EXTRUDED POLYOLEFIN FOAMS ADDITIVES for POLYOLEFIN FOAM HP 73940 FR Flame retardant masterbatch for LDPE-films,
More informationRESEARCH BACKGROUND (Postdoc+) (MS + INDUSTRY) (PHD)
RESEARCH BACKGROUND 1998-2006 (MS + INDUSTRY) Pilot, lab and full scale studies of membranes and other water treatment technologies Desalination major focus 2006-2010 (PHD) Biomimetic membranes! Earliest
More informationStyrene Block Copolymers
PERP/PERP ABSTRACTS 2009 Styrene Block Copolymers Commercial technologies & costs of production for styrene block copolymers: SBS - Poly(styrene-butadiene-styrene), SIS - Poly(styrene-isoprene-styrene),
More informationProfessional Development Program Course Outlines PU POLYURETHANE CHEMISTRY
Professional Development Program Course Outlines PU 101 - POLYURETHANE CHEMISTRY Instructor: Brian Fogg completed 50 years of involvement in the polyurethane industry in 2013. His extensive technical and
More informationCHEMICAL AND BIOLOGICAL ENGINEERING DEPARTMENT. Graduate Program
CHEMICAL AND BIOLOGICAL ENGINEERING DEPARTMENT Graduate Program Colorado School of Mines Founded in 1874 A public, state supported university of science and engineering 6000 total students 4600 undergraduates
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More informationSuperionic Solid State Stamping (S4)
Superionic Solid State Stamping (S4) Lead Faculty Researcher: Placid Ferreira Department: Materials Science & Engineering Hsu et al, Nano Letters, 2007 1. Description: This dry, single step, electrochemical
More informationSaws Dow Corning and Molykote Solutions for Home Appliances
Steam iron Oven Washing machine Dish washer Refrigerator Coffee pot Microwave oven Electric razor Vacuum cleaner Drills Saws Dow Corning and Molykote Solutions for Home Appliances Sealants & Lubricants
More informationSCREW & BARREL METALLURGY & SERVICE LIFE. Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd.
SCREW & BARREL METALLURGY & SERVICE LIFE Mrunal Sanghvi Regional Sales Manager Nordson Xaloy Asia (Thailand) Ltd. 1 Topics of Discussion Current Requirements Screw & Barrel Wear Types of Wear Screw & Barrel
More informationMicrocontact Printing Procedures for Adhesive and Conductive Epoxies
Microcontact Printing Procedures for Adhesive and Conductive Epoxies This objective was accomplished through a formal record of the procedures to deliver a stamped product which met the benchmark mechanical,
More informationUnit 10. Selecting Processes: shaping, joining and surface treatment
Unit 10. Selecting Processes: shaping, joining and surface treatment Mike Ashby Department of Engineering University of Cambridge M. F. Ashby, 2013 For reproduction guidance see back page This lecture
More informationESIG/ESVOC GES Titles & Use Descriptor mapping (Consolidated 20/05/2010)
Page 1 ESIG/ESVOC s & Use Descriptor mapping (Consolidated 20/05/2010) Descriptors General Titles 1 Manufacture of substance Industrial (SU3, SU8, SU9,SU23) Manufacture of the substance or use as an intermediate
More informationCeramic and glass technology
1 Row materials preperation Plastic Raw materials preperation Solid raw materials preperation Aging wet milling mastication Mixing seving Grain size reduction Milling Crushing Very fine milling Fine milling
More informationCalcium Carbonate in Blown HDPE Film
Calcium Carbonate in Blown HDPE Film New Developments to Increase Productivity and Profitability by Gil Morieras - Marketing Manager Polyolefines (Omya) and Dr. Gerard Schaeffer (GS Technology) Many interesting
More informationTech Tip 15 Physical Properties
Tech Tip 15 Physical Properties Physical Properties of Printing Plate Materials Careful evaluation of the physical properties of plate materials can help you identify the rubber or photopolymer plate material(s)
More informationSurf Clear EVO Epoxy system for surfboards
Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,
More informationSHAPE & ROLL: COSMETIC SHELL. Parhys L. Napier Nicholas Torgerson
SHAPE & ROLL: COSMETIC SHELL Parhys L. Napier Nicholas Torgerson SP.718: Developing World Prosthetics May 14, 2010 1 BACKGROUND Jaipur is one of the most well-known organizations for prosthetic devices
More informationAn extensive range of non-halogenated flame retardants
An extensive range of non-halogenated flame retardants Exolit Overview Under the tradename Exolit Clariant offers a distinctive range of non-halogenated flame retardants solutions providing more environmentally
More informationContinuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications
Continuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications Thomas Smith, President TenCate Performance Composites Kipp Grumm, PE Advanced Development
More informationDispersing at its best. TEGOMER Dispersants for Masterbatches and Compounds
Dispersing at its best TEGOMER Dispersants for Masterbatches and Compounds World Masterbatch Demand in 2009 and Distribution ~ 2.5 Mio t/a Demand NAFTA Demand Asia without Japan 700 600 500 400 300 200
More informationTextiles & flexible materials for Transport
Textiles & flexible materials for Transport TECHTERA is the innovation cluster for textiles and flexible materials in the AUVERGNE- RHONE-ALPES region, French leader in the textiles and composites sectors.
More informationNanotechnology and Energy
Nanotechnology and Energy Dipl.-Ing. J. Lambauer Dr. rer. pol. U. Fahl. Prof. Dr.-Ing. A. Voß Institut für Energiewirtschaft und Rationelle Energieanwendung Universität Stuttgart, Germany Agenda 1 Introduction
More informationThe Manufacturing USA institutes to which RIT has been named as a contributing member:
National Leader USA Lightweight Metals Detroit Advanced Robotics Pittsburgh AIM Photonics Rochester, NY REMADE Rochester, NY Advanced Tissue Biofabrication Manchester, NH AFFOA - Fibers and Textiles Cambridge,
More informationMechanical Behaviour of Polymer Sandwich Composites under Compression
American Journal of Materials Science 2015, 5(3C): 107-111 DOI: 10.5923/c.materials.201502.22 Mechanical Behaviour of Polymer Sandwich Composites under Compression Mohd. Zahid Ansari *, Sameer Rathi, Kewal
More informationPROCESSING METHODS OF HIGH DENSITY POLYETHYLENE- EXFOLIATED GRAPHENE NANOPLATELET NANOCOMPOSITES FOR AUTOMOTIVE FUEL TANKS APPLICATIONS
PROCESSING METHODS OF HIGH DENSITY POLYETHYLENE- EXFOLIATED GRAPHENE NANOPLATELET NANOCOMPOSITES FOR AUTOMOTIVE FUEL TANKS APPLICATIONS K. Honaker, F. Vautard, L.T. Drzal Composite Materials and Structures
More informationHomogeneous And Non-Homogeneous Blends Of Liquid Silicone Rubber (For Desired Effects)
Homogeneous And Non-Homogeneous Blends Of Liquid Silicone Rubber (For Desired Effects) Daniel T. Laur President Laur Silicone, Inc. 4930 S. M-18, Beaverton, MI 48612 Phone 989-435-7400 * Fax 989-435-7707
More informationDEVELOPMENT OF POLYURETHANE SHEET MOLDING COMPOUND
DEVELOPMENT OF POLYURETHANE SHEET MOLDING COMPOUND D. Park 1, R. Maertens 2, M. Connolly 3, K. Gleich 4, V. Ugresic 1, F. Henning 2 1 Fraunhofer Project Centre for Composites Research 2 Department of Polymer
More informationThe Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures. SPE Automotive Composites Conference & Exhibition Novi, 2016
The Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures SPE Automotive Composites Conference & Exhibition Novi, 2016 Overview of ELG Carbon Fibre Established in 2011 when ELG Haniel
More informationPRESS RELEASE. Number 13
Wacker Chemie AG Hanns-Seidel-Platz 4 81737 München, Germany www.wacker.com PRESS RELEASE Number 13 PAINT ISTANBUL 2016 WACKER Presents New Dispersible Polymer Powders for Tile and Exterior Applications
More informationFinal Year Project Proposal 1
Final Year Project Proposal 1 Mechanical testing for high temperature polymers Mr Eric Phua Jian Rong (JRPhua@ntu.edu.sg) In offshore subsea drilling, different types of microelectronics devices and sensors
More informationChallenges for the Medical Device Industry. James P. Vetro, P.E. GE Healthcare Global Engineering Manager RoHS & Substances 4 May 2011
Challenges for the Medical Device Industry James P. Vetro, P.E. GE Healthcare Global Engineering Manager RoHS & Substances 4 May 2011 Agenda Who is GE Healthcare? What challenges does the Medical Device
More information