Air Power Line II. Air driven power tool system for orthopedics and traumatology.
|
|
|
- Cuthbert Marsh
- 6 years ago
- Views:
Transcription
1 Air Power Line II. Air driven power tool system for orthopedics and traumatology. High performance Precise cutting This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation.
2 Air Power Line II High Performance and Torque for Drilling and Reaming Air Reamer/Drill II High-performance motor for demanding applications (200W/20Nm) Attachments for most commonly used reaming systems Attachments for optimal speed during drilling (0 930 rpm) and reaming (0 340 rpm) Ergonomic quick coupling system Cannulation B 4.0 mm Quick coupling for guide pins B 1.5 to 4.0 mm For other attachments see Ordering Information. AO/ASIF quick coupling Hudson quick coupling Drill chuck with key Quick coupling for DHS/DCS triple reamers Trinkle quick coupling Drill chuck, keyless
3 Precise Cutting with Special Saw Blades Air Oscillator Stable locking of the saw blade permits firm positioning and precise cuts Sagittal and axial positioning of the saw blade for anatomically adapted access Wide selection of high-quality saw blades for traumatology and prosthetics Frequency of oscillations: /min; saw blade deflection 4.5º Different teeth design of oscillating saw blades for different indications Precise Optimised for high cutting performance Precise Optimised for sparing soft tissues Detailed ordering information on saw blades for the Air Power Line II system can be found in the brochure Large Bone Saw Blades ( ). Radiolucent drive Trinkle quick coupling, modified Adapter for radiolucent drive
4 Precise Cutting with Special Saw Blades Air Reciprocator Precise cuts, e.g. for modeling of the tibial plateau Axial positioning of the saw blade for anatomically adapted access Click-in saw blade assembly Frequency of oscillations: /min; stroke 4 mm Detailed ordering information on saw blades for the Air Power Line II system can be found in the brochure Large Bone Saw Blades ( ). Quality based on experience Synthes has been successfully developing and producing power tool systems for use in traumatology and prosthetics for over 30 years. The Air Power Line combines this extensive experience with state-of-the-art technology, meeting the demanding needs of modern surgical techniques. Comprehensive service For prompt spare part replacement to individual service agreements, your Synthes representative will ensure the professional service needed to guarantee that your equipment continues to operate at a high level of performance and reliability.
5 Ordering Information Power Tools Air Reamer/Drill II Air Oscillator Air Reciprocator Attachments AO/ASIF Quick Coupling for Reamers, AO/ASIF Quick Coupling, Quick Coupling for DHS/DCST Triple Reamers, Drill Chuck (930 1/min), with Key, Drill Chuck (340 1/min), with Key, Spare Key for Drill Chuck, clamping range up to B 7.3 mm Drill Chuck, keyless, Quick Coupling for Guide Pins B 1.5 to 4.0 mm Hudson Quick Coupling (340 1/min), Hudson Quick Coupling (930 1/min), Trinkle Quick Coupling (340 1/min), modified, Trinkle Quick Coupling (930 1/min), modified, Trinkle Quick Coupling (340 1/min), Trinkle Quick Coupling (930 1/min), Adapter for RDL Radiolucent Drive Trinkle Quick Coupling XXL (340 1/min) modified, For further information please contact your local Synthes representative. Cutting tools Detailed ordering information on saw blades for the Air Power Line II system can be found in the brochure Large Bone Saw Blades ( ). Detailed ordering information on the special 3-flute drill bits for the Radiolucent Drive can be found in the brochure Working with the Radiolucent Drive ( ) Technical data is subject to tolerances. Air hoses Wall coupling AO/ASIF Dräger BOC/Schrader Double air hose 3 m Double air hose 5 m Double spiral air hose up to 2m Accessories Cleaning brush Oil dispenser with Synthes special oil Lubrication adapter, for SYNTHES compressed air units Seal Nipple for BOC/Schrader Double Air Hoses, silver Seal Nipple for BOC/Schrader Double Air Hoses, beige Seal Nipple for CompactEAir Drive and for Dräger Double Air Hoses* Vario Case, size 1/1, height 88 mm, for Air Power Line II, without lid, without contents Insert, size 1/2 for Reciprocator, for Vario Case No Lid (stainless steel), size 1/1, for Vario Case * Can also be used to close the air intake of compressed air-operated drive units during washing.
6 DSEM/PWT/0715/0073(1) 03/16 Synthes GmbH Eimattstrasse Oberdorf Switzerland Tel: Fax: This publication is not intended for distribution in the USA DePuy Synthes Power Tools, a division of Synthes GmbH All rights reserved
Manufactured by: Distributed by:
Distributed by: Manufactured by: Contents Introduction 1 Modular Drill / Reamer PM-X08-500 2 Sagittal / Oscillating Saw PM-X12-500 3 Reciprocator / Sternum Saw PM-X14-500 4 Pin / Wire Driver Attachments
OSCILLATING SAW BLADES PAT. PENDING SPEZIAL TOOTHING
MEDICAL ADVANCED TECHNOLOGY OSCILLATING SAW BLADES PAT. PENDING SPEZIAL TOOTHING GUARANTEES THE PERFECT CUT BY LOW PRESSURE ON THE BONE RISK OF THERMAL NECROSIS IS HIGHLY REDUCED introducing ourselve Manufacturer
INVITATION FOR QUOTATIONS FOR SUPPLY OF EQUIPMENT THIS INVITATION DULY SIGNED ON ALL PAGES SHOULD BE ATTACHED WITH THE QUOTE
TAMIL NADU MEDICAL SERVICES CORPORATION LIMITED (A Government of Tamilnadu Undertaking) 417, PANTHEON ROAD, EGMORE, CHENNAI 600 008. ISO 9001:2008 Certified Organisation Phone:28191890, 28190259 Fax No.
Writing Instruments. Mikron leader in writing instruments machinery
Writing Instruments Mikron leader in writing instruments machinery 1 Cost efficient tip manufacturing equipment from Mirkon 2 3 Tip manufacturing Mikron Machining Technology s past is closely linked to
Biodynamics medical technology is the centre of excellence in the area of endoprosthetics and is specialised in joint implants and instruments.
2 3 Biodynamics medical technology is the centre of excellence in the area of endoprosthetics and is specialised in joint implants and instruments. CUSTOMER ORIENTATION AS A MATTER OF PRINCIPLE We stand
KASTOwin pro AC 5.6 High tech for efficient use of bimetallic and carbide blades.
KASTOwin pro AC 5.6 High tech for efficient use of bimetallic and carbide blades. www.kastowin.com More productivity with the new KASTOwin pro AC 5.6 The essence of profitable automated sawing comprises
CHF 270. The new side grinding machine for saw blade production. With full CNC control.
CHF 270 The new side grinding machine for saw blade production. With full CNC control. CNC controlled Automatic side grinding of carbide-tipped circular saw blade teeth. Engineering excellence ensuring
DRILLING MACHINES FOR SPECIAL APPLICATIONS 2017
DRILLING MACHINES FOR SPECIAL APPLICATIONS 2017 Drilling technology for the most demanding professional uses TOP QUALITY MADE IN GERMANY Machines and drills from BDS are among the best tools manufactured
CUTTING/GRINDING DISCOS PARA CORTAR BLOOMFIELD MASONRY SUPPLY TEL: FAX: 13 RACE STREET, BLOOMFIELD, NJ 07003
CUTTING/GRINDING DISCOS PARA CORTAR BLOOMFIELD MASONRY SUPPLY TEL: FAX: 973-748-7716 BLOOMFIELD MASONRY S U P P L Y BLOOMFIELD MASONRY SUPPLY Diamond Blades 14 (IN STOCK AT ALL TIMES) Concrete & Rebar
SECURITY COUNTING SYSTEMS COUNTING SYSTEMS FOR THE SECURITY PRINTING AND PAPER INDUSTRY
SECURITY COUNTING SYSTEMS COUNTING SYSTEMS FOR THE SECURITY PRINTING AND PAPER INDUSTRY The World Counts on Vacuumatic For over half a century the world has been enjoying the benefits of Vacuumatic s pioneering
Maximum performance and durability TCE 443x-24 / 447x
Maximum performance and durability TCE 443x-24 / 447x 1 TCE 443x-24 / 447x Maximum performance and durability Ergonomic and easy to use for maximum performance Bosch TCE 4430-24/4435-24 and TCE 4470/4475
BAUMANN SPRINGS Springs and Stampings for the World.
Welcome BAUMANN SPRINGS Springs and Stampings for the World. SPIRAL SPRINGS COMPRESSION SPRINGS WAVE SPRINGS ASSEMBLIES HUBCAP & RETAINING TENSION AND TORSION SPRINGS MICRO SPRINGS PRESSINGS AND STAMPINGS
SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Permanent Magnet Drill STARTING SERIAL NUMBER.
69(5x) CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 120V Permanent Magnet Drill 2-20 STARTING SERIAL NUMBER G85A BULLETIN NO. 5-6-00 REVISED BULLETIN DATE Apr.
Combined safety and responsibility.
Combined safety and responsibility. STRAUB PRODUCTS Our experience your guarantee The name STRAUB is synonymous with expertise, quality and reliability. As an internationally leading manufacturer of pipe
Operating Instructions Wall saw FZ-4S
Operating Instructions Index 002 10987111 EN /16.11.2016 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which has been designed and built to
Take it along. Set it up. Cut cleanly. HKC 55 cordless portable circular saw with FSK cross cutting guide rail
Take it along. Set it up. Cut cleanly. HKC 55 cordless portable circular saw with FSK cross cutting guide rail More independence. More precision. The HKC 55 with FSK cross cutting guide rail. For more
Restoration & Prosthetics. R liable. Efficient. Precise. Alegra. Turbines
Restoration & Prosthetics R liable. Efficient. Precise. Alegra. Turbines TRIPLE SPRAY for optimal cooling of the treatment site from all sides. SMALL TURBINE HEAD for optimal view of the treatment site.
Our technology makes an impact. BIG-MIX Model 35 Model 48 Model 60 Model 80 Model 110 Model 120. PUMPE BIG-Mix 1
Dosing technology Our technology makes an impact. BIG-MIX Model 35 Model 48 Model 60 Model 80 Model 110 Model 120 PUMPE BIG-Mix 1 Areas of application Optimal solutions for all requirements. Our experience
Pipe and Casing Cutting
Pipe and Casing Cutting A Buyers Guide Rev 1.2 www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence,
ORTHOPEDIC SUBCONTRACTING OPPORTUNITIES
ORTHOPEDIC SUBCONTRACTING OPPORTUNITIES By Martin von Walterskirchen and Scot Orgish, Swiss Business Hub USA Overview of the U.S. Orthopedics Market The orthopedics accounts for about 29 percent of the
METAL. The new drilling technology for quick and flexible use. FEIN KBH 25 The world s first hand-guided metal core drilling system
METAL The new drilling technology for quick and flexible use. FEIN KBH 25 The world s first hand-guided metal core drilling system Core drilling enters a new dimension with the FEIN KBH 25. The world s
Mow Mulch Site Prep. Turbo Mulcher TM-60
Mow Mulch Site Prep Turbo Mulcher TM-60 Almost Two Decades of Innovation Dougherty Forestry Manufacturing was founded in 2003 with the vision of producing high quality attachments at outstanding values.
TIG Welding Torch SR 9 V SR 17 V / FXV SR 26 V air cooled
TIG Welding Torch SR 9 V SR 17 V / FXV SR 26 V air cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M Technical Data (EN 50 078): SR 9 V / SR 17 V / SR 17 FXV / SR 26 V Rating: 110 / 140 / 180
0225/ IMTEC Moulded inserts. Thread inserts for in-moulding
0225/12.02 IMTEC Moulded inserts Thread inserts for in-moulding Table of contents IMTEC Moulded inserts Thread inserts for in-moulding Page Technology 3 Product types 4 Selection guide for IMTEC moulded
AUTOMATED BONE DRILLING IN THE ORTHOPEDIC SURGERY: EXPERIMENTAL ANALYSIS OF THE TEMPERATURE EFFECTS.
11 th National Congress on Theoretical and Applied Mechanics, 2-5 Sept. 2009, Borovets, Bulgaria AUTOMATED BONE DRILLING IN THE ORTHOPEDIC SURGERY: EXPERIMENTAL ANALYSIS OF THE TEMPERATURE EFFECTS. T.
Always. Reliable. Tight. Cable sealing system Cable entry system KES-M90. cablepipebuildingentry+
Always. Reliable. Tight. Cable sealing system Cable entry system KES-M90 cablepipebuildingentry+ Cable entry system KES-M90 KES-M90-D Features and technical data: pressure-tight ducting system up to 2.5
AFFORDABLE SAWING STARTS WITH TIMBERY!
AFFORDABLE SAWING STARTS WITH TIMBERY! timbery.eu M100 M100 FEATURES M100 with 4 kw Electric Motor 9 HP or 14 HP Gas Engine 4 kw or 5.5 kw Electric Motor Sawyer has quick and easy access to: head up and
ACO Marine. ACO Scuppers - ACO Channels ACO Drainage Systems for Shipbuilding and Offshore Installations
ACO Marine ACO Scuppers - ACO Channels ACO Drainage Systems for Shipbuilding and Offshore Installations Basic characteristic Through a consistent and effective product development, ACO Marine has developed
PRICE LIST Valid from June 1, 2018
PRICE LIST Valid from June 1, 1 All s e works! All previous Easy-Cut-Price Lists will epire by this date. INFORMATION How to order by telephone: 4 (0) 51 41/ 54-100 per E-mail: vertrieb@cedima.com by telefa:
Maximum flexibility for product presentation. PAGO System 520
Maximum flexibility for product presentation PAGO System 520 Decorative labelling expertise PAGO System 520 For years now, Pago has been successfully developing new products and building up the essential
PlastCoat PC 25/ PC 35
PlastCoat PC 25/ PC 35 The powerful ones Plaster spraying indoors and out with equipment geared to practical use. Quality Offensive! With their plaster spraying units WAGNGER have made it easier to get
Coating and Reconditioning Services
The Tool Company TWIST DRILLS REAMERS DIAMOND TOOLS TAPS END MILLS MODULAR TOOL SYSTEMS RECONDITIONING & COATING Coating and Reconditioning Services Guhring s Reconditioning Division turns worn cutting
We ve built a STRONG CASE. for changing the way you sterilize. Reusable Sterilization Container System
We ve built a STRONG CASE for changing the way you sterilize. Reusable Sterilization Container System Reusable Sterilization Container System Introducing the DePuy Synthes REUSABLE STERILIZATION CONTAINER
SAWS. S - Series - Sliding Table Panel Saws
SAWS S - Series - Sliding Table Panel Saws 2 SAWS S - Series - SLIDING TABLE PANEL Saws OVERVIEW OF S - Series PANEL SIZING SAWS S315 S400 S400NC Max. saw blade diameter (mm) 315 400 400 Max. cutting height
SPECIFICATION FOR AUTOMATIC DRILL POINT GRINDER
SPECIFICATION FOR AUTOMATIC DRILL POINT GRINDER NOTE :- 1. The vendor (OEM) must fill the "offered" column in compliance to specified requirements and also "Deviations". (OEM- Original Equipment Manufacturer)
SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
Product information. Hotrunner solutions for applications in the medical industry
Product information Hotrunner solutions for applications in the medical industry Hotrunner systems for the medical industrysolutions for a growing market The production of injection-moulded thermoplastic
SERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
NORMACONNECT Pipe Connections
V Profile clamps The V profile clamps are reliable and time-effective connection elements for industrial use. Short description of technical features They are made to customer requirements and can be supplied
Product Information. Pallet change system NSR-A 100
Product Information NSR-A 100 NSR-A Compact. Loadable. Precise. NSR-A Pneumatic pallet change system with patented locking system Field of application For automatic changing of tools such as pallets in
ORIGINAL-SPARE PARTS A PART OF US
ORIGINAL-SPARE PARTS A PART OF US 2 Only the genuine choice is first choice: LEMKEN spare parts The profitability of agricultural machinery often depends on details, and that s why it s best to use only
COMBINED SAFETY AND RESPONSIBILITY STRAUB PIPE COUPLINGS.
COMBINED SAFETY AND RESPONSIBILITY www.straub.ch STRAUB SOLUTIONS PROVIDE ADDED VALUE THE RIGHT CONNECTION Based on the well-proven STRAUB coupling technology, which can be found in millions of pipe connections
QV-800. Digital Universal System. Innovations in Digital Imaging.
QV-800 Digital Universal System Innovations in Digital Imaging. QV-800 Digital Radiography CORPORATE INFORMATION CORPORATE INFORMATION CORPORATE OVERVIEW Quantum Medical Imaging is one of the worlds leading
oil cleaner Electrostatic Product brochure
Product brochure Turbotect Saint-Petersburg Ltd., Krasnogo Kursanta str., 11/1-2, Saint-Petersburg, Russia, 197110 tel.: +7-812-380-20-77 fax: +7-812-380-31-46 www.turbotectspb.com e-mail: info@turbotectspb.com
Bosch TCE 4470 and TCE 4475 A new standard in professional tire changing
Bosch TCE 4470 and TCE 4475 A new standard in professional tire changing TCE 4470 and TCE 4475 Maximum performance and durability TCE 4470 S441 TCE 4475 S44 TCE 4470 and TCE 4475 are pneumatic tilting
OETIKER. Technical Data Sheet. 1-Ear Clamps. 1-Ear Clamps with Insert. 2-Ear Clamps. Connecting Technology. Dimple. Ear. Ear width.
OETIKER width Technical Data Sheet 1- Clamps Product Group 153 Insert width 1- Clamps with Insert Product Group 154 width (Double clamping range) 2- Clamps Product Group 101 & 151 Connecting Technology
HST -B Interlocking device (Translation of Original Manual)
Installation and Operating Manual for Components HST -B Interlocking device (Translation of Original Manual) HST-B Ident.-No.: 10201 HST-B Ident.-No.: 10207 HST-B Ident.-No.: 10202 HST-B Ident.-No.: 10208
Test Summary Resonant Fatigue Testing 7 OD, ppf, P-110 GB CD
Page 1 of 5 Introduction This report summarizes a Resonant Fatigue Test performed on 7 OD, 26.00 ppf, P-110 Casing finished with GB CD (Casing Drilling) Connections. The test was performed to determine
CROSSCUT x 12.90/9.0 x 75 mm. 66 interchangeable TCT inserts Tooth form Hollow tooth. Tooth type 4
CROSSCUT Teeth 2000 x 12.90/9.0 x 75 mm 66 interchangeable TCT inserts ollow tooth. 6 expansion slots with copper rivets 6 noise reduction slots with copper rivets DS-No. 10116 Designed for rough log yard
Präzisions-Kreissägeblätter USA PROGRAM CARBIDE TIPPED PRECISION CIRCULAR SAW BLADES.
USA PROGRAM CARBIDE TIPPED PRECISION CIRCULAR SAW BLADES www.walter-saegen.de EXPERIENCE, QUALITY, FLEXIBILITY From a one-man operation to one of the most modern manufacturing companies in the saw blade
Combiforwarder Systems manual,rapid,regent,powerful
Combiforwarder Systems manual,rapid,regent,powerful Always a step ahead The productivity of the E-series forwarders is being revolutionized by our systems. Our technical innovations for various load space
Cosasco Retractable System (Intermediate Pressure Access)
Cosasco Retractable System (Intermediate Pressure Access) COSASCO RETRACTABLE SYSTEM MODEL 6 Features Quick Mounting & Release Simple to Operate Lightweight 5 PSI Working Pressure Convenient Carrying Case
Bystronic: Best choice.
BENDING 4 BENDING Bending Bending is a procedure for forming a flat, sheet metal workpiece. It immediately follows cutting in the processing chain. The workpiece lies on a bottom tool with a v-shaped
TBS 3 V BSB. Made in. Germany. Band saws. It s the result that matters
TBS 3 V BSB Made in Germany Band saws It s the result that matters HOKUBEMA Band saws For any need, for any material - band saws by HOKUBEMA. Competence you feel If you have ever worked with band saws
passion for precision Spiral flute drills Supradrill U
passion for precision Spiral flute drills Supradrill U Spiral flute drills Supradrill U for drilling steels [ 2 ] Spiral flute drills of the Supradrill U type are solid carbide drills, which have been
TBS 3 V BSB. Made in. Germany. Band saws. It s the result that matters
TBS 3 V BSB Made in Germany Band saws It s the result that matters HOKUBEMA Band saws For any need, for any material - band saws by HOKUBEMA. Competence you feel If you have ever worked with band saws
Eliminates pilot hole 135 Self - Centering Split Point Made of Super Cobalt Steel Performs best at low RPM Cuts extremely fast
Double Ended Drill Bits Made of High Speed Steel for superb durability. 135 Split Point prevents the drill bit from walking. Long life. Won't break under normal use. Please use #12020 Boron Buster when
Trabecular Metal Revision Shell. Surgical Technique IMAGE TO COME. The Best Thing Next to Bone
Trabecular Metal Revision Shell Surgical Technique IMAGE TO COME The Best Thing Next to Bone Trabecular Metal Revision Shell Surgical Technique Initial and Long-Term Stability Fully-interconnected trabecular
CNC machining centres
CNC machining centres When competitiveness means maximum machining freedom Made In Biesse 2 The market demands a change in manufacturing processes that will allow companies to accept the largest possible
Hydraulic and lubrication systems & solutions and spare parts for the wind turbine industry
Hydraulic and lubrication systems & solutions and spare parts for the wind turbine industry Innovation based on experience and customer orientation PMC Hydraulics A/S is the centre of all wind turbine
Bosch Garden Shredders.
Bosch Garden Shredders. AXT 25 TC Universal shredding AXT Rapid 2200 Green and soft material AXT 25 D Shrubs How to choose your Bosch Shredder. Step 1 Decide which type of material and how often you need
CBF 300. Automatic side grinder for stellite-tipped bandsaw blades.
CBF 3 Automatic side grinder for stellite-tipped bandsaw blades. Outstanding grinding results coupled with simple operation. The CBF 3. The CBF 3 side grinder with supporting stands. The operation is simple
021 COUNTERBORES 055 MASONRY
010 BUTT WELDED TOOLS 016 DIE HEADS & CHASERS 017 THREAD RESTORERS Page...........................32 Page...........................33 Page...........................33 019 SHEET & TUBE DRILLS 020 COUNTERSINKS
PipeCut 170E. PipeCut 220E. PipeCut 280E. PipeCut 360E. PipeCut V1000. PipeCut P400
PipeCut 170E PipeCut 220E PipeCut 280E PipeCut 360E PipeCut V1000 PipeCut P400 www.exacttools.com A Unique, Exact method for cutting pipes. The Exact pipe cutting system is designed and made for professional
OPT 40/1. General introduction MOBILE OPERATING TABLE. OPT 40/1 and OPT 30/1
OPT 30/1 OPT 40/1 OPT SurgiSystems is an Italian brand and manufacturer of operating tables and OR accessories of the highest quality. OPT s production and headquarters are located in Calliano (Trento),
Cryogenic Homogenizing System
Cryogenic Homogenizing System Handheld homogenizer with mortars and pestles Increases sample throughput System helps preserve sample integrity The Talboys Cryogenic Homogenizing System combines the ease
CROSSCuT x 12.90/9.0 x 75 mm. 66 interchangeable TCT inserts Tooth form Hollow tooth. Tooth type 4
CROSSCuT 2000 x 12.90/9.0 x 75 mm Teeth 66 interchangeable TCT inserts ollow tooth. 6 expansion slots with copper rivets 6 noise reduction slots with copper rivets DS-No. 10116 CROSSCUT Designed for rough
PRODUCT CATALOG. Thin-Cutting Saw Blades & Maintenance Machines
PRODUCT CATALOG Thin-Cutting Saw Blades & Maintenance Machines EN QuadraTool stands for competence in Thin-Cutting. Behind QuadraTool you find a competent and skilled team. Many years of experience and
Homogenizer and Mixing Technology for the Laboratory
MEGATRON MT 3100 S Homogenizer and Mixing Technology for the Laboratory INLINE DISPERSING SYSTEM for a variety of applications «through-put of up to 12 l/min» MEGATRON - Inline Dispersing System When testing
SECURITY WITH SOPHISTICATED STYLE
SECURITY WITH SOPHISTICATED STYLE The attractive Roll-Vision model protects against theft and keeps out debris while allowing full view of what s inside. Unlike competitors grilles, our unique design uses
ESTABLISHED IN Infiltration Tank. Assembly and Installation Guide.
ESTLISHED IN 1986 Infiltration Tank ssembly and Installation Guide www.atlantiscorp.com.au Tank Module ssembly Guide 2 2 ssemble Matrix Tank Units If Matrix Tanks arrive on your project in flat panels
TECHNICAL SPECIFICATION OF HORIZONTAL MILLING MACHINE
SCOPE: SUPPLY, ERECTION & COMMISSIONING OF HORIZONTAL MILLING MACHINE WITH SPECIFICATIONS AS BELOW : SL. NO. DESCRIPTION OF BHEL REQUIREMENT REQUIRED OFFERED DEVIATION REMARKS 1.0 PURPOSE & WORKPIECE MATERIAL
TUBE LASER. Automotive Railways Petrochemical Aerospace Construction Commercial vehicles Agricultural machinery
TUBE LASER 4 TUBE LASER Automotive Railways Petrochemical Aerospace Construction Commercial vehicles Agricultural machinery TUBE LASER 5 Limitless applications The application of processed tubes and
Gas Pressure Regulator HON 330
Gas Pressure Regulator HON 330 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 330.20 EDITION 01/2017 330.20 p. 2 330.20 p. 23 Compensating diaphragm (118,168, 243,
Precision in fixation
For more information, visit Medartis at www.medartis.com or contact us directly: Medartis AG Hochbergerstrasse 60E CH-4057 Basel P +41 61 633 34 34 F +41 61 633 34 00 www.medartis.com Precision in fixation
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION 1.1. GENERAL INTRODUCTION Shell and tubes heat exchangers are used in a wide variety of applications in many industries for heat transfer purposes. The integrity of tube-tubesheet
The New Decanter Generation Westfalia Separator ecoforce. Born to run. GEA Mechanical Equipment / GEA Westfalia Separator Group
Liquids to Value The New Decanter Generation Westfalia Separator ecoforce Born to run GEA Mechanical Equipment / GEA Westfalia Separator Group Manages Everything, Needs Little, Lasts Forever Westfalia
BIG ENOUGH TO SERVE. SMALL ENOUGH TO CARE THE BLACKHAWK INDUSTRIAL TEAM. The BlackHawk Industrial Team Cares About You - The Customer
THE BLACKHAWK INDUSTRIAL TEAM BIG ENOUGH TO SERVE. SMALL ENOUGH TO CARE. BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating
BySprint Pro. laser cutting. efficiency in. The unique high-speed laser cutting system for the highest operational and economic efficiency
efficiency in laser cutting BySprint Pro The unique high-speed laser cutting system for the highest operational and economic efficiency 2 BySprint Pro swift and economical Record speeds when cutting thin
VIRIO the right turn for new challenges The new, flexible generation of vertical balancing machines
VIRIO the right turn for new challenges The new, flexible generation of vertical balancing machines RM 1041-1 e 2 VIRIO A further generation Modern technology is developing at a tremendous pace: Extreme
AT130D Rockwell principle bench hardness tester
AT130D Rockwell principle bench hardness tester The proper solution for any hardness control issue AT130D - Rockwell principle bench hardnesstester AT 130 D Not influenced by bending nor deflections Simple,
Index. MEGA-Spike-Drill. Product presentation 4 General information 5 Technical specification 5. MEGA-Spike-Drill M9535 6
The tool specialists for the trade. Standard product line MEGA-Spike-Drill The tool specialists for the trade. MILLER GmbH, Präzisionswerkzeuge in Altenstadt is a member of the tool-traders-partner association
Bystar. laser cutting. efficiency in. The modular laser cutting system for sheet metal, tubes, and profiles
efficiency in laser cutting Bystar The modular laser cutting system for sheet metal, tubes, and profiles 2 Bystar versatile, flexible, powerful Bystar is the flexible universal solution, which in addition
Instruction Guide Re-Usable Surgical Instruments. Instruction Guide Re-usable surgical instruments (GA 30.1)
Instruction Guide Re-usable surgical instruments (GA 30.1) Part A: General Information 1. Field of application 2. Basics 3. General 4. Construction and Material 5. Compatibility 6. Labelling label symbols
RF 100 Speed GUHRING - YOUR WORLD-WIDE PARTNER. High-performance roughing even at deep cutting depths. Smooth operation and high metal removal rate
High-performance roughing even at deep cutting depths Smooth operation and high metal removal rate HPC milling in tough, low-alloyed and high-alloyed steels, and other difficult-to-machine materials GUHRING
Installation and maintenance instructions for GRAF rainwater storage tank, Carat-S series
Distributed by: info@graf-online.de Installation and maintenance instructions for GRAF rainwater storage tank, Carat-S series 2700 Litres / 700 US-gallons Order No. 372001 3750 Litres / 1000 US-gallons
ENGLISH. hartl-crusher.com NOTHING CAN SUBSTITUTE EXPERIENCE HARTL KNOW-HOW
ENGLISH hartl-crusher.com NOTHING CAN SUBSTITUTE EXPERIENCE HARTL KNOW-HOW HBC 650-1250 UNIQUE QUATTRO MOVEMENT With a toggle plate that is specially designed to be positioned upwards instead downwards,
Technical Solutions for Renewable Energy
Technical Solutions for Renewable Energy intelligent engineering safe clean long-lasting Senior Berghöfer CSP Technology Concentrated Solar Power Your partner with more than 25 years of experience for
NUCLEAR. Nuclear Reactor Pressure Vessel Seals
NUCLEAR Nuclear Reactor Pressure Vessel Seals SEALING CONCEPT Technetics Group is the world s leading manufacturer of Nuclear Reactor Pressure Vessel (RPV) Closure Head Seals. In addition, Technetics Group
SERIES FC 600/780/1000 SPEEDMASTER plus STEEL RULE CUTTING MACHINES ENGLISH
ENGLISH SERIES FC 600/780/1000 SPEEDMASTER plus STEEL RULE CUTTING MACHINES FC SPEEDMASTER plus The FC SPEEDMASTER plus is an automatic vacum pressure forming machine with servo plugs and with steel rule
Pumps & Systems. Dosing Technology. Emptying Conveying Dosing
Pumps & Systems Dosing Technology Emptying Conveying Dosing Applications and Products Perfectly Matched You ve got the application, we ve got the solution As a truly global producer of progressing cavity
Xr2000C, Xr2000R, Xr3000C, Xr3000R 1
The reliable brand! xr Slow-running 1-shaft shredder for the coarse and medium shredding of waste Xr2000C, Xr2000R, Xr3000C, Xr3000R 1 function and design The clever waste shredder Ripper System With minimal
REAMER REAMER CARBIDE / HSS YE-RM13 CARBIDE / HSS
REAMER CARBIDE / HSS YERM HEAD OFFICE, CheongcheonDong, BupyeongGu, Incheon, Korea PHONE :+00, FAX:+7 http://www.yg.kr Email:yg@yg.kr Tool specifications are subject to change without notice. REAMER CARBIDE
ATLANTIC PRODUCTION PLANTS FOR YOUR SUCCESS BFS THE TECHNOLOGY LEADER ATLANTIC
ATLANTIC TECHNOLOGY PRODUCTION PLANTS FOR YOUR SUCCESS BFS THE TECHNOLOGY LEADER ATLANTIC A wide range of products, fast mould changes, and short cycle times with the Atlantic from BFS, this is all a reality.
VERTICAL MULTIPROCESS LATHES
VERTICAL MULTIPROCESS LATHES INTEGRATION OF MACHINING PROCESSES AND STRATEGIES GEMINIS VL is a new concept in multi-process machine developed in order to obtain the highest performance in the machining
Automatic Key Cutting Machine - CONDOR XC-007 CONDOR. Automatic Key Cutting Machine XC-007. User Manual V1.2
1 CONDOR Automatic Key Cutting Machine XC-007 User Manual V1.2 2 Table of Contents 1) Safety Precautions and Warnings --------------------------------------------3 2) General Information -------------------------------------------------------4
SKF linear motion solutions for medical equipment
SKF linear motion solutions for medical equipment The Power of Knowledge Engineering The way to care In today s medical world, comfort and safety are key requirements. Hospital environments become more
Has anyone really thought about the requirements for drilling living human bone tissue until now? One simple solution.
Has anyone really thought about the requirements for drilling living human bone tissue until now? One simple solution One easy decision Patents Pending Analysing the Needs For decades, orthopaedic surgery
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO. Alan Andreani, Ed. D. Mayor of Alliance
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO 2016 Alan Andreani, Ed. D. Mayor of Alliance Mike Dreger, Director Public Safety & Service GENERAL TERMS AND CONDITIONS 1. Special
Power and Performance
Mining Industry Products Power and Performance For the Mining Industry U.S. Tsubaki The Power to Perform The mining industry demands the most from power transmission products roller chains, engineering