DRopped Object Prevention - DROPS. Sarah Molyneux SDA Drilling Engineer
|
|
- Rudolph Horn
- 6 years ago
- Views:
Transcription
1 DRopped Object Prevention - DROPS Sarah Molyneux SDA Drilling Engineer 1
2 Shell s DROPS campaign Shell Global DROPS programme was instigated in Q Dropped objects counted for great majority of potential and actual fatalities in Wells operations over the previous two years to that. In Wells every 5 days a potential DROPS incident was being recorded Standard Prevention of Dropped Objects manual ABC Guides to Dropped Object Prevention... 4 principles: Contractors providing equipment and personnel should have a DROPS scheme in place Systematic DROPS inspection programme shall be in place Worksite Hazard management for DROPS should be in place Audits to check for compliance with DROPS should be in place. 2
3 Vol 1 ABC Guide Worksite Hazard Management After listing the 4 mandatory requirements... Helps with some of those mandatory requirements Tubular Handling Checklist Derrick Temporary Equipment Register example 10 Questions for a safe lift Example of Red Zone Reliable securing 3
4 Vol 2 ABC Guide Inspection and Audit After listing the 4 mandatory requirements... Helps with some of those mandatory requirements Transport Inspections Weekly Inspections of permanent and temporary installations Independent Surveys of permanent installations Self Assessment Audit Audit Checklist 4
5 DROPS campaigns Communicating the scale of the problem and training key personnel on how to avoid dropped object incidents All campaigns included an animated video together with training material (and a facilitators guide) 2010 campaign s were... Tools at height Tubular Handling Red and No-Go zones 2011 campaign s were... Handling Toolstrings and lubricators 5
6 Prevention of Dropped Objects: DROPS - Tubular Handling Use this area for cover image (height 6.5cm, width 8cm) Sarah Molyneux SDA Drilling Engineer 6
7 What am I here to talk about today? Introduce the topic of tubular handing Part of Shell DROPS Why is it important topic to Shell. And why it should be for you Encourage some discussion around good and bad practices Encourage some feedback amongst yourselves about unsafe work practices Get you to look for improvements in your workplace. Starting with an awareness session. Share some of my experiences relating to tubular handling Show you an animation and get some feedback from you Follow up with.. Over next couple of days do some rigsite training sessions 7
8 Why is Tubular Handling Important? - Fatality N Sea
9 Why is Tubular Handling Important? 9
10 Why is Tubular Handling Important? - Dropped BOP 10
11 Why is Tubular Handling Important? Dropped 7 liner 11
12 Why is Tubular Handling Important? Dropped Drillpipe 12
13 Animation 13
14 Lifting and Hoisting Banksman left the job Is the deckhand qualified to do the banksmans job Now on his own - No double checking Checking / Positioning of slings Double wrapped? No tag line No barriers. Turned his back and stayed in the drop zone red zone Was his mind really on the job 14
15 Catwalk and Homemade Tools Handling of thread protectors Visual inspection of lifting gear Homemade equipment or rig repaired The right lifting equipment for the job Single joints latched and safety pin in Testing of lifting equipment People in red zone when not needed 15
16 Elevators Paying attention to the job in-hand Tired end of shift rotation of personnel Keeping a tally Knowing when the size changes Need good communication between derrickman and driller Checking and double checking the sizing of pipes and elevators Colour coded elevators 16
17 Where do we go from here End of the Awareness session Follow up with some rigsite training sessions Pre-job checks Lifting and Hoisting Elevators Encourage some discussion around good and bad practices Encourage some feedback amongst yourselves about unsafe work practices Get you to look for improvements in your workplace. 17
18 What more can we do? Attend the DROPS Forum Australia 3 rd November 2011 Pan Pacific Hotel All O&G industry members welcome Start an Australian Chapter of the DROPS Forum and support the local Steering Committee Share our success stories and failures 18
19
Use of Locally Fabricated or Modified Equipment. DROPS Forum July
Use of Locally Fabricated or Modified Equipment DROPS Forum July 02 2009 Incident 1: Welder Electrocution A rig subcontractor suffered fatal injuries from electrical shock while performing a welding operation.
More informationWritten Safety and Health Program
Written Safety and Health Program For XYZ Company Required for all Hawaii Businesses with 25 or More Employees Incorporates Provisions of Hawaii Administrative Rules Title 12, Subtitle 8, Part 2, Chapter
More informationRECOMMENDED PRACTICE 9.0 FOR LAND- BASED DRILLING RIGS AND SERVICE RIGS
RECOMMENDED PRACTICE 9.0 FOR LAND- BASED DRILLING RIGS AND SERVICE RIGS MINIMUM STANDARDS FOR DERRICK EGRESS Version 1.0 August 1, 2006 CANADIAN ASSOCIATION OF OILWELL DRILLING CONTRACTORS Introduction
More informationWorldwide Support. Field Services. 01. TenarisHydril
01. TenarisHydril 01. TenarisHydril Worldwide Support TenarisHydril premium connections are supplied and supported by Tenaris, a leading manufacturer and supplier of steel pipe and integrated tubular services
More information26 PROCESS SAFETY MANAGEMENT
26 PROCESS SAFETY MANAGEMENT QUIZ 1 (20 POINTS) True/False (5 points) 1. SARA Title III required companies to develop emergency preparedness plans; recognition, knowledge, and inventories of hazardous
More informationOPITO APPROVED STANDARD. LOLER Competent Person. Competence Assessment Standard
OPITO APPROVED STANDARD LOLER Competent Person Competence Assessment Standard OPITO Standard Code: 9064 The content of this document was developed by an industry work group coordinated by OPITO including:
More informationThe Advantage of Implementing a Safety Management System. Integrating Occupational Safety Management into Other Management Functions
Contents Introduction, Objectives The Advantage of Implementing a Safety Management System Occupational Safety Charter Integrating Occupational Safety Management into Other Management Functions Establishing
More informationMechanical Material Handling: The Loading Dock
Mechanical Material Handling: The Loading Dock Welcome Washrooms Beverages Emergency exit and procedures Slide #2 Agenda Ministry of Labour Handling Orders Overlooked Areas of an Operation Take the Mechanical
More informationBowmer. & Kirkland. Kirkland. & Accommodation. Health & Safety Policy.
Bowmer Kirkland & Kirkland & Accommodation Health & Safety Policy December 2013 www.bandk.co.uk Index Policy Statement Page 3 Interaction of Health and Safety Responsibilities Page 5 Organisation Page
More information2011 IRF Summit Conference Summary. Lars Herbst GOM Regional Director BSEE
2011 IRF Summit Conference Summary Lars Herbst GOM Regional Director BSEE As Attendees: Obtain an understanding of regulatory impacts from Montara and Macondo. Obtain an understanding of the avalanche
More informationScaffolding and Raised Platforms
Standard Operating Procedures Scaffolding and Raised Platforms Last Modified: JAN 2013 1 of 7 Scaffolding and Raised Platforms I Purpose To provide a guideline for personnel who work around or on stationary
More informationCranes and Derricks Standard Summary. April, 2010
Cranes and Derricks Standard Summary April, 2010 New Crane Regulations Federal OSHA proposed Crane and Derrick Standard in October, 2008. Expected final Federal regulation: June 2010?? In effect now in
More informationSHORT COURSES. Industry Training New Zealand
SHORT COURSES Industry Training New Zealand 2 CONTENTS About Tai Poutini Polytechnic About Training for Industry Short Courses Cranes Truck Mounted Crane Pendant Crane Lifting Loads Telehandler Scaffolding
More informationWORKFORCE ENGAGEMENT - PERSPECTIVES EVENT
WORKFORCE ENGAGEMENT - PERSPECTIVES EVENT Wednesday 5 September 2012 follow us on Twitter @StepChangeInfo WELCOME & SAFETY BRIEF Les Linklater Team Leader Step Change in Safety follow us on Twitter @StepChangeInfo
More informationBothered? Safety cannot be left to management or the big name companies.
Asset Integrity Collaboration Step Change in Safety is a member-led organisation, formed by the oil and gas industry, for the oil and gas industry. Step Change brings together operators and contractors,
More informationCAL/OSHA ELECTRICAL HIGH VOLTAGE
Preparation: Safety Mgr Authority: CEO Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to prevent injuries due to electrical exposure to high voltage for employees and contractors
More informationMechatronics Courses by School Period
Mechatronics Courses by School Period Year One P1 P1 P2 P3 P3 P3 P4 P4 P4 Integrated Systems Industrial Math (Geometry, Trig, Algebra,) Blueprint Reading Machine Tool I (Hand tools-measuring-saws & Drill
More informationIncident [Accident] Investigations
Incident [Accident] Investigations 1. Preserve/ Document Scene 2. Collect Information 3. Determine Root Causes 4. Implement Corrective Actions Objectives for Today Discuss the importance of why all incidents,
More informationISO Occupational Health and Safety Management System
ISO 45001 Occupational Health and Safety Management System Sandra Enciso Deann Desai Georgia Manufacturing Extension Partnership (GaMEP) Georgia Tech February 17, 2017 Partnership for a Sustainable Georgia
More information6 SAFETY CULTURE ESSENTIALS
6 SAFETY CULTURE ESSENTIALS Many organizations want to improve their safety culture in order to reduce injury rates, save money, and increase productivity. But how does a company begin to foster a culture
More informationHealth, Safety & Wellbeing Absolute Rules
Health, Safety & Wellbeing Absolute Rules Breaking our Absolute Rules is unacceptable We must always intervene when we see unsafe acts 2 Global Health, Safety & Wellbeing Background The following six rules
More informationSTART. Your Safety and Work. A guide to help small- and medium-sized enterprises get started on workplace safety and health
START Your Safety and Health @ Work A guide to help small- and medium-sized enterprises get started on workplace safety and health 1 CONTENTS Introduction 3 Quick Check 4 Set up a team 5 Think and plan
More informationScaffolding Procedures
Procedures Purpose It is the purpose of this company in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for scaffold work. Application This
More informationTHE NEW CRANE STANDARD
THE NEW CRANE STANDARD By Molly O Brien FDRsafety December 2012 Summary While cranes and derricks do make the movement of heavy materials much easier for workers, many safety hazards are associated with
More informationHealth and Safety Management Standards
Management Standards Curtin University Sept 2011 PAGE LEFT INTENTIONALLY BLANK Management Standards Page 2 of 15 CONTENTS 1. Introduction... 4 1.1 Hierarchy of Documents... 4 2. Management System Model...
More information"CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "CAUGHT-IN/BETWEEN HAZARDS IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
More informationElectrical Safety Programs
2017 NFPA Conference & Expo Electrical Safety Programs Ensuring Effective Development and Implementation Presented by: Barry Boggs Toyota Mark Hilbert MR H Electrical Inspections & Training Employer Responsibility
More informationRECOMMENDED SAFETY TRAINING REQUIREMENTS page 1 of 4
RECOMMENDED SAFETY TRAINING REQUIREMENTS page 1 of 4 OHSA s. 9 (12) - 2 JHSC Members (1 Management, 1 Worker) - Upon selection of the 2 to 3 days - Certified Workers are to be trained, at the employers
More informationGroup Health & Safety. Management System
Group Health & Safety Management System 2010 H ealth and Safety is our first priority. It has been our priority for several years and it will continue to be until it becomes clearly embedded in the culture
More informationSUBCONTRACTOR MANAGEMENT
Doc : Revision. 0 Preparation: Safety Mgr Authority: Director Issuing Dept: Safety Page: Page 1 of 9 Purpose The purpose of this program is to ensure that ANC Foster continues to improve subcontractor
More informationPROCESS SAFETY MANAGEMENT PROGRAM UNIPAR CARBOCLORO
PROCESS SAFETY MANAGEMENT PROGRAM UNIPAR CARBOCLORO Clorosur Technical Seminar & WCC Safety Workshop Flávia Mariano Pinto November 18, 2016 Facility Cubatao, Sao Paulo -Brazil 1,000 metric tons chlorine/day
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number E-2.0 Safety Audits and Inspection Program
Number E-2.0 Issued: 1/2009 Revised: 12/2015 Page 1 of 2 1.0 PURPOSE: To establish a formal system to routinely self-inspect each Euramax facility in an effort to detect unsafe and/or hazardous conditions,
More informationPIN s genericone time use access to the registration system online. PIN s are not tied to
1 2 PIN s genericone time use access to the registration system online. PIN s are not tied to a user in any way. It is given to them so that they can gain access to register as a user into the SCOT course.
More informationOPTUS SUPPLIER WORK HEALTH & SAFETY POLICY
OPTUS SUPPLIER WORK HEALTH & SAFETY POLICY 1. Introduction 1.1 SCOPE & PURPOSE This policy (which includes this document and the work health and safety standards, policies, procedures and safety control
More informationEDUCATION SUPPORT OFFICER Cardijn College Position Information Document
EDUCATION SUPPORT OFFICER Cardijn College Position Information Document Name: Position Title: Maintenance Officer Employment: Permanent Replacement Temporary x Commencement date: / / 2016 Full Time/Part-time
More informationCRANE INCIDENT ONBOARD TANKER. October 2005
CRANE INCIDENT ONBOARD TANKER October 2005! SM Introduction! Fatal incident onboard one of our in-charted vessels during crane operation!vessel was chartered out to our biggest customer STATOIL 2 Chain
More informationWilliam Mattiford CSP VP Corporate Safety
William Mattiford CSP VP Corporate Safety The ETD Partnership Structure of the Partnership Executive Committee Steering Committee Working Groups (Task Teams) Task Team 1 Data Task Team 2 Training Task
More informationMETHOD STATEMENT FOR PIPE WELDING WORKS
METHOD STATEMENT FOR PIPE WELDING WORKS Introduction This Method statement describes in detail the welding process for pipe work and the welder s qualification test procedures. This includes addressing
More informationCorporate Quality, Health, Safety and Environment Plan
Corporate Quality, Health, Safety and Environment Plan 2014 Document No: Revision: 0 Issue Date: 18 December 2013 1. MESSAGE FROM CHIEF EXECUTIVE OFFICER To All Songa Offshore Employees, 2013 was good
More informationLoad Handling (Hoisting) Policy
1.0 PURPOSE This policy is to promote safe load handling (hoisting) practices and reduce the frequency and severity of incidents. The purpose is to protect personnel from injury, the environment from harm,
More informationNATIONAL ENERGY BOARD PIPELINE PERFORMANCE MEASURES REPORTING GUIDANCE
NATIONAL ENERGY BOARD PIPELINE PERFORMANCE MEASURES REPORTING GUIDANCE Amended November 2014 PIPELINE PERFORMANCE MEASURES - OVERVIEW Introduction The National Energy Board (Board) took action in March
More informationHealth and safety in The Westpac Group
Health and safety in The Westpac Group Updated 15 February 2010 We care about your health and safety. And through our health and safety system, we aim to make your workplace safe by removing and managing
More informationJULY 10, 2013 INTRODUCTION
Guidelines to Establish the Chief Engineer s Responsibility N.J.A.C. 12:90 Boiler, Pressure Vessel and Refrigeration Rules Specifically N.J.A.C. 12:90-3.9 (a) NOTE: PROPER USE OF THIS DOCUMENT WILL ASSURE
More informationLevel 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
More informationCorrective Action IN RESPONSE TO FINAL REPORT FOR SURVEILLANCE OF THE TJNAF RIGGING AND MATERIAL HANDLING ACTIVITIES. AUGUST 2005
Plan IN RESPONSE TO FINAL REPORT FOR SURVEILLANCE ACTIVITIES. AUGUST 2005 FIND-1 FIND-2 A crane was located in the Experimental Equipment Laboratory (EEL) that had been retrofitted from a pendant to a
More informationOur health and safety policy objective is that no person will come to harm while working, studying or visiting UNSW.
Introduction This plan sets health and safety objectives for UNSW for -2018 based on UNSW s Policy and in support of the UNSW 2025 Strategy and associated Faculty and Division Operational Plans. This plan
More informationSpecific Accreditation Criteria Infrastructure and Asset Integrity ISO/IEC and ISO/IEC Annex. Lifting equipment assessment
Specific Accreditation Criteria Infrastructure and Asset Integrity ISO/IEC 17020 and ISO/IEC 17025 Annex Lifting equipment assessment January 2018 Copyright National Association of Testing Authorities,
More informationBuilding the culture. Contractor alignment workshop to build The HSE Culture Shell and Contractor on boarding workshops:
1 Alignment Objectives Understanding of the project importance Building a common HSE culture Setting targets Creating ownership and personal Action Plans Attendance No. of workshops/attendants: 30+/750
More informationFACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY AERIAL WORK PLATFORM POLICY 09/06/17 Last Revision 1. Intent This program has been developed to reduce the risk of physical injury or property
More information01 Intro & Services.qxd 15/2/12 4:43 PM Page 7 Services
www.tech-inspect.com.au 1. Are you having trouble keeping track of your critical lifting, height safety and lifted equipment assets? 2. Do you know if these assets are being inspected and maintained in
More informationHealth & Safety. Report 2011/12
Health & Safety Report 2011/12 1 Contents Page 1. Introduction 3 2. Health and safety policy 4 3. Health and safety model 4 4. Performance against 2011/12 objectives 5-8 5. Assurance activities 8 6. Health
More informationSECTION 4 MANAGEMENT OF CHANGE OCS Production Operations
Safety & Environmental Management Version 2.3 SECTION 4 MANAGEMENT OF CHANGE Reviewed By Director of Production and Operations Steve Bodden Stone Energy Corporation Reviewed By Director of Deepwater Drilling
More informationADVANCED WORKSITE TRAFFIC MANAGEMENT
ADVANCED WORKSITE TRAFFIC MANAGEMENT 1 - FULL COURSE Course Length: Course Times: Minimum - Five (5) days 8.00 am to 4.00pm (negotiable with PCBU - Employer) MRWA Substantive Accreditations (Valid for
More informationPeter Juhren Corporate Service Manager Morrow Equipment Co. L.L.C. Salem, OR USA. What s New in Tower Crane Standards?
Peter Juhren Corporate Service Manager Morrow Equipment Co. L.L.C. Salem, OR USA What s New in Tower Crane Standards? The opinions expressed in this presentation are those of the presenter, Peter Juhren,
More informationPAGE 1 OF 10 HEALTH, SAFETY & ENVIRONMENTAL MANUAL PROCEDURE: S370 Mobile Cranes Procedure REV /14/2012
PAGE 1 OF 10 PURPOSE: MOBILE CRANES PROCEDURE To establish a procedure that provides guidelines that constitute safe operation of mobile cranes. It is not all encompassing or intended to replace common
More informationHSSE TRAINING PLAN (Aim and Objectives)
Page 1 OF 6 Al-Yamama Engineering Company HSSE TRAINING PLAN (Aim and Objectives) 1 Page 2 OF 6 Purpose To ensure All AL-YAMAMA s staff, safety representatives, members of the working environment committee
More informationBP U.S. Pipelines and Logistics (USPL) Safety Manual Page 1 of 7
Safety Manual Page 1 of 7 Scaffolds 1. Purpose This policy establishes the basic safety requirements and safe work practices for the erection, use, inspection, movement, and dismantling of scaffolding.
More informationApprenticeship and Industry Training
Apprenticeship and Industry Training Rig Technician Apprenticeship Course Outline 052.2 (2011) ALBERTA ADVANCED EDUCATION AND TECHNOLOGY CATALOGUING IN PUBLICATION DATA Alberta. Alberta Advanced Education
More informationLoad Handling (Hoisting) Policy
1.0 PURPOSE This policy is to promote safe load handling (hoisting) practices and reduce the frequency and severity of incidents. The purpose is to protect personnel from injury, the environment from harm,
More informationBrad Whitaker, MSPH, CSP HSE Director BOS Solutions
HSE Management Systems What they are, how they work, and how to implement or improve your HSE Management System to successfully manage HSE in your organization Brad Whitaker, MSPH, CSP HSE Director BOS
More informationFORKLIFT OPERATOR SAFETY
Table of Contents SECTION 1. TRAINING PROGRAM INTRODUCTION..................3 Training Objectives...........................................3 Rationale for Training.........................................3
More informationPowered Industrial Truck/Forklift Operations Standards and Procedures. Disaster Cycle Services Standards & Procedures DCS SP DMWT
Powered Industrial Truck/Forklift Operations Standards and Procedures Disaster Cycle Services Standards & Procedures DCS SP DMWT April 2015 Change Log Date Page(s) Section Change Author: Deploy Materials,
More informationManagement Plan for Walking/Working Surfaces & Fall Protection (29 CFR , 23, 66 App.C; 29 CFR ) ISD #535
Management Plan for Walking/Working Surfaces & Fall Protection (29 CFR 1910.22, 23, 66 App.C; 29 CFR 1926.502) ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9½ Street Rochester, MN
More informationCONSTRUCTION INDUSTRY ADVISORY COMMITTEE Paper Meeting date: 21 July 2005 CONSTRUCTION INDUSTRY ADVISORY COMMITTEE (CONIAC)
CONSTRUCTION INDUSTRY ADVISORY COMMITTEE Paper CONIAC Meeting date: 21 July 2005 Open Govt. Status: Type of paper: (updated May 2009) Paper File Ref: M2/2005/2 Exemptions: CONSTRUCTION INDUSTRY ADVISORY
More informationA copy of this Policy Statement and our WPVP Program is readily available to all employees from each manager and supervisor.
Scope and Application Our establishment, [Organization Name] is concerned and committed to our employees' safety and health. We refuse to tolerate violence in the workplace and will make every effort to
More informationAre you in control of process safety? Basis of safety assurance can provide the answer
Loss Prevention Bulletin 231 June 2013 23 Safety practice Are you in control of process safety? Basis of safety assurance can provide the answer Phil Eames Eur Ing BSc CEng FIChemE Eames Risk Consulting
More informationCorporate Quality, Health, Safety and Environment Plan
Corporate Quality, Health, Safety and Environment Plan 2015 Document No: Revision: 1 Issue Date: 12 January 2015 Controlled Document Information Document Information Revision 1 Current Revision Approvals
More informationBuildings Department Safety and Inspection Requirements
Buildings Department Safety and Inspection Requirements Presented by Andrey Vishev, Chief of NYCDOB BEST Squad at the 28th Annual North-East Regional Tri-Sectional (NY-NJ-PA) Industrial Hygiene Conference
More informationMANUAL HANDLING PROCEDURE
Document uncontrolled when printed Procedure ID no 0480/05 MANUAL HANDLING PROCEDURE This procedure is applicable to: All Department of Education and Children's Services employees. DOCUMENT CONTROL Managed
More informationTransport Sector Portfolio
Transport Sector Portfolio Rehabilitation of 4.476 Kms of Asphalt Road in Shindand District, Herat Province, Afghanistan. United Nations Office for Project Services ( UNOPS ) -and- Name of Contractor Site
More informationMachine Guarding and Maintenance
1. Identification of Workplace Hazard Machine Guarding and Maintenance The exposed moving parts of machinery can cause serious injuries to an employee who is inadvertently caught by the machine. Hazardous
More informationPETOL Big D Tubing Elevator BDA100. Data Book. Warning
PETOL Big D Tubing Elevator BDA100 Data Book Warning Improper use of tubing elevators may result in injury or death. Do Not Exceed Rated Load of 100 Tons. Follow safe practices listed in Data Book. GEARENCH
More informationStandards Summary Sheet
Standards Summary Sheet CSA Standard B167-2008 (R2015) Overhead Travelling Cranes Design, Inspection, Testing, Maintenance and Safe Operation Scope and Application This standard specifies the minimum requirements
More informationTGL Fabrication Co.,Ltd. A growing Company with a growing reputation. Horizontal Load Testing & Inspection Services.
Horizontal Load Testing & Inspection Services. TGL Fabrications Co; Ltd Inspection Services provides comprehensive inspection of all hoisting and lifting gear onshore & offshore; the equipment is inspected
More informationConstruction & Trades Testing and Tagging Requirements
Construction & Trades Testing and Tagging Requirements All constructio n and demolition sites have a Testing and Tagging requirement for electrical equipment under AS/NZS 3012:2010. On this page you will
More informationSiemens Wind Power / HSE Service. By: Skilled? Maritime prepared? Safe? Risk prevention! Offshore Wind Turbine service
Siemens Wind Power / HSE Service By: Jesper.Haaning@siemens.com Skilled? Risk prevention! Maritime prepared? Safe? Offshore Wind Turbine service For internal use only / Siemens Protection AG 2008. notice
More informationLevel 2 NVQ Diploma in Construction Operations and Civil Engineering Services Highways Maintenance (Construction)
Civil Engineering Services Highways Maintenance (Construction) Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements
More information1. Introduction. 2. Background. 3. Guidelines. CICA-Endorsed ENGINEER S COMPETENCIES
CICA-Endorsed ENGINEER S COMPETENCIES 1. Introduction This document states the eligibility criteria for applicants seeking CICA recognition in the specific area of practice of Crane Major Inspection Certification,
More informationIsolating Potential Flow Zones During Well Construction
Isolating Potential Flow Zones During Well Construction API Standard 65 Part 2 Glen Benge http://publications.api.org/ API Standard 65-2 Document highlights industry recommended cementing and well construction
More informationSTANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2001 SUBJECT: Scaffolding Safety Program. REGULATORY STANDARDS: 29 CFR 1910.28 Safety Requirements For Scaffolding. 29 CFR 1910.29 Manually Propelled Mobile
More informationRecognition Programs. Chinook Drilling 8/9/2012
2012 Recognition Programs Chinook Drilling 8/9/2012 2 3 Table of Contents 34.0 Recognition & Accountability Programs...4 34.1 Operational Management...4 34.2 Rig Manager...4 34.3 Driller...4 34.4 Crew
More informationWork Based Training Policy and Procedure
1. Purpose This policy and procedure describes how practical placements are to be arranged to ensure that each placement achieves its aims and all stakeholders are protected from liability including gaining
More informationCURRICULUM DEVELOPMENT ADVISORY
CURRICULUM DEVELOPMENT ADVISORY Safety Instruction Course for Ship-Repair Managers (SICSM) Version 1.0 01 August 2011 Workplace Safety and Health Council, Ministry of Manpower, Singapore (MOM) All rights
More informationWHS Management Plans
WHS Management Plans Disclaimer This Guide provides general information about the obligations of persons conducting a business or undertaking and/or persons in control of premises and workers under the
More informationControl of Equipment on Masts, Towers and Rooftops BOP018.8
Control of Equipment on Masts, Towers and Rooftops BOP018.8 1.0 Introduction This document defines the rules to be followed for all works on Arqiva owned or managed sites/structures that have a structural
More informationAcross the industry, ways are being sought to
F O C U S Questioning the Way We Drill Across the industry, ways are being sought to find and extract oil and gas more cost-effectively, while improving safety and environmental performance. Drilling is
More informationNEBOSH International Technical Certificate in Oil & Gas Operational Safety
NEBOSH International Technical Certificate in Oil & Gas Operational Safety UNIT IOG Management of International Oil & Gas Safety Operational Safety Sample Trainer Pack RRC Trainer Packs are designed to
More informationOwner: Judy Brinkman Site Director
Title: Contractor Management Procedure Site Function: Ecology, Health & Safety Procedure No.: 4.03 Page: 1 of 12 Kankakee Reviewed: 08/16/2016 Effective: 08/16/2016 Supersedes: 10/2/09 Preparer: Jodie
More informationVehicle Impact Barriers for Elevated Structures
technical notes CAR IMPACT BARRIERS FOR ELEVATED STRUCTURES Wheel stops should not be relied upon to prevent cars falling off elevated structures. Impact barriers must be provided. Impact barriers must
More informationContractor Selection & Management Guideline Rev01. Revision 00. April 2011
Contractor Selection and Management Guideline Revision 00 April 2011 Document Details and Issue Record Rev No. Details Date Author 00 Draft 10/04/2011 CJMD Checked Text Calcs Approved Document Reference:
More informationScaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
More information10 minute read. Key Takeaways. How technology supports more proactive and efficient safety management
1 Key Takeaways 10 minute read Read this ebook to learn: 1 2 3 Tips on what an effective safety program should include Common shortcomings in contractor safety programs How technology supports more proactive
More informationWELCOME TO THE PILE DRIVING INSPECTOR COURSE
Lesson 1 WELCOME TO THE PILE DRIVING INSPECTOR COURSE 1-1 Welcome to the Pile Driving Inspector Course. This is a course designed to assist students to understand the specifications and inspection practices
More informationField ID Electronic Inspection System
Field ID Electronic Inspection System Field ID Seamless Management of Lifting Assets Field ID is the world s leading paperless safety compliance and equipment inspection system. The system combines webbased
More informationWork Health and Safety Toolkit for Congregations
Work Health and Safety Toolkit for Congregations Developing your WHS Management System Title Work Health and Safety Toolkit for Congregations Creation Date Dec 2014 Version 1 Last Revised Dec 2014 Approved
More informationGeneral Electrical Safety Awareness Course: E100
General Electrical Safety Awareness Course: E100 30 minutes No No All "non-qualified" or "unqualified" employees Facility or Plant Management All production personnel Office staff and personnel Any general
More informationPROGRAM OVERVIEW JOB HAZARD ANALYSIS (JHA) SAFETY PROGRAM REGULATORY STANDARD: 29 CFR
PROGRAM OVERVIEW JOB HAZARD ANALYSIS (JHA) SAFETY PROGRAM REGULATORY STANDARD: 29 CFR 1910.132-138. INTRODUCTION: Injuries in the workplace often occur because employees are not adequately trained in the
More informationJOB DESCRIPTION. Job Description Company: The Living Planet Aquarium (TLPA) and Loveland Living Planet Aquarium
Job Description Company: The Living Planet Aquarium (TLPA) and Loveland Living Planet Aquarium (LLPA) in Draper currently under construction Position: Facility Manager Reports to: Director of Operations
More informationPRO Traffic Management
MS&L Procedure PRO-4.5-0001-1-08 Traffic Management Version: 1 Prepared by: Adrian Connolly Authorised by: Michael Learmonth Authorisation Date: 29/5/2016 This document has been approved for release and
More informationApprenticeship and Industry Training
Apprenticeship and Industry Training Crane and Hoisting Equipment Operator Wellhead Boom Truck Apprenticeship Course Outline 0344.4 (2006) ALBERTA ADVANCED EDUCATION CATALOGUING IN PUBLICATION DATA Alberta.
More information