User Requirement Specification Specyfikacja Wymagań Użytkownika
|
|
- Clara Melton
- 6 years ago
- Views:
Transcription
1 \ Project / Projekt: Albumina dożylna nowej generacji oparta o wielostopniowy proces inaktywacji wirusów Plasma Fractionation Department BIOMED-LUBLIN Wytwórnia Surowic i Szczepionek S.A. ALBUMINA / ALBUMIN Document Name: User Requirement Specification Specyfikacja Wymagań Użytkownika Equipment: Liquid products packaging line Linia pakowania produktów płynnych BIOMED-LUBLIN Wytwórnia Surowic i Szczepionek Spółka Akcyjna w Lublinie, ul. Uniwersytecka 10, Lublin Poland Elaborated by: Opracował: Name and Family name Imię i Nazwisko Position Funkcja Date / Signature Data / Podpis Checked by: Sprawdził: Checked by: Sprawdził: Approved by: Zatwierdził: Document no.: Dokument nr : Version: Wersja:
2 1 PROJECT DESCRIPTION 1.1 Project Scope BIOMED-LUBLIN intends to launch Plasma Fractionation Department (hereafter called the PROJECT). The existing building is located at Mielec; ul. Wojska Polskiego 3, Poland. The new Plasma Fractionation Department have to comply with the current GMPregulation of EU and Poland. Polish GMP is equivalent to European GMP. This User Requirements Specification defines a certain SCOPE OF DELIVERY for a VENDOR that is the part of PROJECT. 2 DOCUMENT OBJECTIVE The objective of the User Requirements Specification (URS) is to outline technical requirements for design, manufacture, supply, delivery and installation of the Filling Line. This URS will serve as a technical base for a VENDOR selection, purchase orders and qualification practices. 3 GENERAL The equipment shall be quoted as specified in the URS. VENDOR shall bring to CLIENT S attention for resolution any conflict that may occur between this specification and codes, standards or proven design practice. CLIENT S review of drawings and documents shall in no way lessen VENDOR S responsibility for completeness and accuracy of the submitted drawings and documents and to provide a complete and operating system in compliance to all applicable codes and regulations. In all cases the SCOPE of SUPPLY shall be capable of performing according to the requirements of this specification. VENDOR shall specifically remain liable for any errors and/or omissions contained in VENDOR S design and shall be responsible for all costs to remedy such defects in the design. VENDOR S obligation is also co-operation and liaison with other subcontractors involved in the PROJECT and responsibility for functionality of related equipment. 4 PRODUCT DESCRIPTION 4.1 Product Features and Production Program Information about products is listed in the table below. The main features are: All products are liquids, plasma fractionation protein products: 4.2 Primary Packaging All products will be filled In glass vials, closed with stoppers or with lyo-stoppers (+ filter + solvent) p. 2
3 and crimped with aluminum caps. 5 SYSTEM DESCRIPTION CARTONING PACKAGING LINE FOR GLASS VIALS WORKING WITH OUTPUT cartons / min (depends of vial format) Format parts for following containers should be included in delivery scope: Vials dimensions: Size 1 ) 20 H Dia. 32,0; h.58,8 [mm] Carton 36x36x50 [mm] Size 2 ) 50 H Dia. 42,0; h.73 [mm] Carton 46,5x46,5x80 [mm] Size 3 ) 100 H Dia. 49,0; h.104 [mm] Carton 53x53x111 [mm] Size 4 ) 250 H Dia. 69,0; h.125 [mm] Carton 73x73x132 [mm] Size 5 ) 500 H Dia. 88,0; h.147 [mm] Carton 92x92x154 [mm] The line should be composed: a) Rotary table for feeding product ( diameter min mm) - Manual in-feed tray - Safety and soundproof hood b) Inspection machine Optical inspection machine suitable for two operators. c) Rotary table after inspection machine d) Automatic labeling machine contains: - luminescent photocell, - unwinding device, - Hot foil printing unit, - Hot foil printing presence control, - rejection system with rejection control, - bar code laser scanner. e) e) buffer and rotary accumulation table before cartoning machine. The same like in item a). f) Cartoning machine contain: - folding unit of leaflets, - code reading head to leaflet ( both side) plus cartons, - printing unit wolke to print 2D code plus 5 lines (even though it will be used for now 3 lines), - camera for verify printing. Machine should have possibility to work on the glued cartons from two sides. g) Automatic case packer machine contains: - Station of rejection cases not complete. - verification of full layers of cartons (only presence camera), - case closing unit by PVC adhesive tape. h) Labeling machine base on PLC controllers with appropriate interface and screen p. 3
4 6 Fixation and Clean Room Finishes Fixations and penetrations The fixation of the fline on the final position will be specified by VENDOR. Any other mounting elements (as bolts, anchors, screws, steel structures etc. or it s counterparts) are within the SCOPE OF SUPPLY of VENDOR. If required, CLIENT will integrate these elements or it s counterparts into the concrete structure Penetrations through walls Penetrations through concrete walls/ceiling and clean room partition walls or suspended ceiling are provided by CLIENT, following VENDOR S specifications and according to current law regulations Elements of clean rooms For penetration through clean room partition walls, ceiling, floor of the clean room VENDOR shall provide the required GMP-conforming sealing elements (stainless steel plates, rosette, etc.). VENDOR ensures that no part of the SCOPE of SUPPLY is mounted on clean room partition walls. 6.2 Battery limits for utility and electrical systems The battery limits, defined below, describe the interfaces of the SCOPE OF SUPPLY as defined by this specification and the other parts of the PROJECT. VENDOR is completely responsible for any components, elements and equipment within the SCOPE OF SUPPLY. The following battery limits are defined below: Unit Utility Parameter Air for Control System Connection size Scope of supply by VENDOR 6-8 bar Manual valve Power 230/400 V/50 Hz As utility connections generally disconnectedly solutions shall be applied. 7 DOCUMENTATION REQUIREMENTS 7.1 The Documentation is a part of SCOPE OF SUPPLY: A Layout of whole line with all dimensions have to be delivered with the offer B draft of validation documentation and FAT protocols should be delivered 30 days before FAT execution C final documentation As-built before commissioning 7.2 Deliveries language Qualification documentation will be delivered in English language. Final reports will be translated into Polish p. 4
5 7.3 Documents to be delivered in Polish language: Safety Manual Installation & Maintenance Manual Opearation Manual DCS 7.4 Number of copies: Printed documents have to be delivered at least in one ( 1) hardcopy.; 7.5 File deliveries All documents which are delivered with offer shall be also supplied as electronic computer files; Allowed Format: MS-Software Word, Excel, Access Acrobat -.pdf AutoCAD Data on CD data carrier After start-up all machine documents will be corrected and pass on with changes. 8 Approval and commissioning VENDOR should provide all the documentation for PED, CE Mark certification of the unit. 9 List of materials and spare parts List of materials and spare parts should be supplied at the end of the project. 10 Inspection and Commissioning Inspection and commissioning tests at VENDOR S site (FAT) Work inspection and functional tests of constructed equipment will be carried out at VENDOR'S premises (Factory Acceptance Test FAT) by the CLIENT. CLIENT reserve the right to inspect VENDOR any time of contract duration. Before Factory Acceptance Test (FAT) VENDOR shall prepare written FAT Protocol containing all required inspection and testing activities. FAT protocol will be delivered to CLIENT. FAT tests will be executed and completed by VENDOR. VENDOR shall supply utilities and any auxiliary tools. Empty vials for testing of loading system will be supplied by CLIENT. Tests will be carried out by VENDOR personnel. Any costs which are caused by a prolongation of FAT due to permanent failure of certain tests shall be borne by VENDOR. VENDOR shall also produce the report upon completion of FAT (factory acceptance test) and shall commit to resolve any discrepancies taking during the FAT execution. FAT positive completion is a condition to release shipment Inspection and commissioning tests at CLIENT S site (SAT) Commissioning and SAT should be provided and carry out by VENDOR specialist with the presence of CLIENT specialist in a mutually agreed date p. 5
6 Work inspection and functional tests of constructed equipment will be carried out at CLIENT'S premises (Site Acceptance Test FAT) by the CONTRACTOR. CONTRACTOR and CLIENT reserve the right to inspect VENDOR any time of contract duration. Before Site Acceptance Test (SAT) VENDOR shall prepare a test program. This proposal of test program will be checked and if required modified by CLIENT and CONTRACTOR. SAT test will be executed and completed by VENDOR. VENDOR shall supply utilities and any auxiliary tools. Primary packages will be supplied by CLIENT. Tests will be carried out by VENDOR personnel. Any costs which are caused by a prolongation of SAT due to permanent failure of certain tests shall be borne by VENDOR. VENDOR shall also produce the report upon completion of SAT (site acceptance test) and shall commit to resolve any discrepancies taking during the SAT execution. VENDORS is allowed to use qualification tests results during SAT procedure and to use SAT procedure tests results during qualification. 11 Shipment Vendor will be responsible for the transport acc. to: DAP (INCOTERMS 2010) rule (EU) Mielec or DDP (INCOTERMS 2010) rule (exeu) Mielec Place of destination is Plasma Fractionation Plant building located at Mielec; ul. Wojska Polskiego 3, Poland VENDOR is responsible to fulfill all importing requirements and custom regulations of Poland. In case Polish authorities require additional information and certifications to accept an equipment to be imported to Poland, this shall be provided by VENDOR at no cost to CLIENT. 12 Installation After having received the shipment on site, equipment will be stored in the building. VENDOR will be also responsible for delivery of all auxiliary materials and means of transportation. CLIENT will be responsible for all connections and transfer of equipment in the building. After bringing equipment to the building, VENDOR will start installation of it. All necessary auxiliary materials are included in SCOPE OF SUPPLY. CLIENT will provide utilities connection acc. to Chapter 8.4. After acceptance of required documentation VENDOR shall prepare an Installation Plan containing the following information: 1. Installation Schedule 2. Methods of transfer and assembling 3. Required tools 4. Required personel p. 6
7 13 Qualification services The following activities shall take place during qualification; detailed requirements will be listed in qualification documentation - FAT by VENDOR (with vials delivered by CLIENT) - Computer system/software validation according to GAMP 5 - Risk analysis for the line will be done during project phase - IQ, OQ - qualification documentation (blank protocols, forms of reports) - to be elaborated and delivered by VENDOR Minimum scope of tests is as follows:. Each unit of the line o Formal proofing of calibration status o Problem alarming test und function test o Easy access to all motors, filters and pumps o Changing of formats o Measuring and regulating devices easy accessible Risk Analysis CONTRACTOR will be carrying out a detailed Risk Analysis for the equipment defined in SCOPE OF SUPPLY. It will be done after the order and defined in time schedule Design Qualification DDesign Qualification will be carried out by VENDOR. VENDOR shall deliver all required for this purpose documents Installation Qualification VAll necessary qualification documents (blank forms) will be supplied by VENDOR and delivered to CLIENT Operation Qualification All necessary qualification documents (blank forms) will be supplied by VENDOR and delivered to CLIENT Commissioning documents Commissioning will be done after: Fully successful and completed start-up, commissioning and SAT Hand over a complete As-Built Documentation Acceptance criteria The following acceptance criteria shall be fulfilled: Effective capacity -100 % of nominal capacity during time test acc. to DIN No system defects Change of formats reduced to minimum All other detailed acceptance criteria established and agreed together with CLIENT and CONTRACTOR p. 7
8 14 Warranties VENDOR shall propose the duration of warrant and should be not less than 12 months from SAT. 15 APPLICABLE RULES AND STANDARDS 15.1 General Norms and Standards Equipment covered by SCOPE OF SUPPLY shall comply with all actual technical Norms and Standards Internal Requirements of CLIENT and CONTRACTOR VENDOR S personnel responsible for installation at CLIENT S site must take part in training organized by the CLIENT for people temporary working at CLIENT S site. VENDOR S personnel must obey rules and requirements of the CLIENT (no smoking restriction, safety rules, fire protection requirements, GMP). There are not any CLIENTS and CONTRACTORS special requirements. Requirements of VMP must be fulfilled. 16 GMP-compliance regulations The SCOPE OF SUPPLY must comply with the following regulations: 1. Actual cgmp regulations 2. GMP requirements for automatic systems p. 8
User Requirement Specification Specyfikacja Wymagań Użytkownika
\ Project / Projekt : Albumina dożylna nowej generacji oparta o wielostopniowy proces inaktywacji wirusów Plasma Fractionation Department BIOMED-LUBLIN Wytwórnia Surowic i Szczepionek S.A. Document Name:
More information35 STATION DOUBLE ROTORY COMPRESSION MACHINE
Page 1 of 16 User Requirement Specifications 35 STATION DOUBLE ROTORY Equipment ID: T-35COMP 01 Page 2 of 16 Table of Contents 1.0 APPROVAL SIGNATURES 2.0 OVERVIEW 3.0 PROCESS DESCRIPTION 4.0 PRODUCTIVITY
More informationSPECIFICATION. Ir-192 hot cell
SPECIFICATION Ir-192 hot cell 1. Scope The purpose of this document is to define the specifications for the construction of a class C hot cell with two chambers (hereinafter referred as the System ) intended
More informationUser Requirement Specifications
Page 1 of 13 ANNEXURE III User Requirement Specifications MACHINE :Linear Bottle Washing CAPACITY: 120 Bottles/ minute Page 2 of 13 Table of Contents 1.0 APPROVAL SIGNATURES....03 2.0 INTRODUCTION...04
More informationUser Requirement Specifications
Page 1 of 15 User Requirement Specifications Tablet Inspection Belt Equipment ID: T-INSB01 Page 2 of 15 Table of Contents 1.0 APPROVAL SIGNATURES 2.0 OVERVIEW 3.0 PROCESS DESCRIPTION 4.0 PRODUCTIVITY REQUIREMENT
More informationQUALITY ASSURANCE PROTOCOL (QAP)
PREFACE This Standard details the level of documentation that PVT.LTD (IET) will provide during a contract for fabricating tank(s) or portable equipment s. Extensive documentation is required for this
More informationTECHNICAL SPECIFICATION OF HORIZONTAL MILLING MACHINE
SCOPE: SUPPLY, ERECTION & COMMISSIONING OF HORIZONTAL MILLING MACHINE WITH SPECIFICATIONS AS BELOW : SL. NO. DESCRIPTION OF BHEL REQUIREMENT REQUIRED OFFERED DEVIATION REMARKS 1.0 PURPOSE & WORKPIECE MATERIAL
More informationPRELIMINARY QUOTATION No for the supply of. STACKER FOR SHEET max L3000 x W2100 mm
Preliminary quotation No. 16-024.00 pag. 1 PRELIMINARY QUOTATION No. 16-024.00 for the supply of STACKER FOR SHEET max L3000 x W2100 mm Preliminary quotation No. 16-024.00 pag. 2 Preliminary quotation
More informationVALIDATION AS A KEY TOOL IN SUCCESSFUL TRANSFER OR ESTABLISHMENT OF A MEDICAL DEVICE COMPANY IN A NEW FACILITY
VALIDATION AS A KEY TOOL IN SUCCESSFUL TRANSFER OR ESTABLISHMENT OF A MEDICAL DEVICE COMPANY IN A NEW FACILITY Oren Levin, Diane Gordon VisionCare Ophthalmic Technologies, POB 3879, Petah Tikva 49130,
More informationSPECIAL INSPECTION AGREEMENT
PART 1 STATEMENT OF SPECIAL INSPECTIONS When special inspection is required to be performed in accordance with International Building Code Chapter 17, a building permit cannot be issued until a statement
More informationYOUR PARTNER FOR TURNKEY SOLUTIONS IN PHARMA & BIOTECH INDUSTRY AN ISO 9001:2008 CERTIFIED COMPANY
CHEMION PURIFIED WATER GENERATION, STORAGE AND DISTRIBUTION SYSTEM YOUR PARTNER FOR TURNKEY SOLUTIONS IN PHARMA & BIOTECH INDUSTRY AN ISO 9001:2008 CERTIFIED COMPANY CHEMION ENGINEERING THE COMPANY The
More informationValidation. An Easy to Understand Guide Validating Purified Water Systems
Validation Overview Validation Documentation Validation Activities Validation Mistakes Validation Protocols Test Selection Common Verifications When to test Test Layout and Content Validation Protocol
More informationProject QMS and Quality by Design Activities
QMS and Quality by Design Activities Main Topics of the Presentation Quality by Design Structure Critical Control Points in the Different Phases 1. Acquisition Phase 2. Design and Engineering Phase 3.
More informationPERFORMANCE QUALIFICATION PROTOCOL HVAC SYSTEM
Page 1 of 24 PERFORMANCE QUALIFICATION PROTOCOL FOR HVAC SYSTEM Signing of this Performance Qualification Protocol indicates agreement with the Validation Master Plan approach of the equipment. Further
More informationPIKES PEAK PARKING RESTORATION TABLE OF CONTENTS
23 HEATING, VENTILATING AND AIR CONDITIONING TABLE OF CONTENTS TABLE OF CONTENTS DIVISION 23 HEATING, VENTILATING AND AIR CONDITIONING - Basic HVAC Requirements 238239.19 - Wall and Ceiling Unit Heaters
More informationAssociation of American Railroads Quality Assurance System Evaluation (QASE) Checklist Rev. 1/12/2017
Company: Prepared By: Date: Changes from previous version highlighted in yellow. Paragraph Element Objective Evidence 2.1 Objective of Quality Assurance Program 2.2 Applicability and Scope 2.3 QA Program
More informationCUSTOMER: REFERENCE: DPTE TRANSFER SYSTEM Autoclavable containers PRODUCT SPECIFICATION PRODUCT The DPTE transfer system is recognized as being the safest method for introducing and removing sterile and/or
More informationEquipment Qualification Ensure Fit for Intended Use. IVT Amsterdam Conference Mary Sexton. 19 Mar 2015
Equipment Qualification Ensure Fit for Intended Use IVT Amsterdam Conference Mary Sexton 19 Mar 2015 Equipment Qualification Ensure Fit for Intended Use 1. Types of Qualification 2. Validating Equipment
More informationIn general, the SVQ Terms and Conditions of Purchase and Manufacture shall apply, unless agreements to the contrary are stated hereunder.
Terms for Tool Suppliers (Annex to the Purchase Order) Additional Commercial Contract Terms In general, the SVQ Terms and Conditions of Purchase and Manufacture shall apply, unless agreements to the contrary
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 102239 - FOLDING PANEL PARTITIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDesign, Fabrication, Supply, Installation & Commissioning of Scissor Lift for ITMT Building at. CREST, Hosakote. Indian Institute of Astrophysics
Design, Fabrication, Supply, Installation & Commissioning of Scissor Lift for ITMT Building at CREST, Hosakote Indian Institute of Astrophysics Bangalore October 2017 1. Introduction The required scissor
More informationManaging Validation. Paperless Recorders
Managing Validation Paperless Recorders Multitrend Plus Validation Background The past five years has seen an increase in the use of computerized systems and products in the pharmaceutical and bio-pharmaceutical
More informationSpecial Inspections Program Procedures - IBC Section 1704 Special Inspections - Index:
Building Safety Department 100 W. Eldorado Pkwy Little Elm, TX 75068 (214) 975-0456 www.littleelm.org Special Inspections Program Procedures - IBC Section 1704 Special Inspections - Index: A. Owner- Responsibilities.
More informationINSTALLATION INSTRUCTION IM 317 E
INSTALLATION INSTRUCTION IM 317 E Device: Thermal Gas flow meter Ecoflow 3 with measuring armature E3555 and flow sensor E3510 for measurement of pressured air, nitrogen, oxygen, carbon dioxide, DN 15
More informationP-196 MARINE CORPS RESERVE VEHICLE MAINTENANCE FACILITY NWS CHARLESTON, SC SECTION DESIGN AND CONSTRUCTION QUALITY CONTROL 11/07
PART 1 GENERAL 1.1 REFERENCES SECTION 01 45 00.05 20 DESIGN AND CONSTRUCTION QUALITY CONTROL 11/07 The publications listed below form a part of this specification to the extent referenced. The publications
More informationFORM HEADWALL. FORM HEADWALL (floating) (floating) Installation Manual
FORM HEADWALL (floating) Installation Manual FORM HEADWALL (floating) OVERVIEW The Form is a UL-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated
More informationFORM HEADWALL. FORM HEADWALL (floor mount) (floor mount) Installation Manual
FORM HEADWALL (floor mount) Installation Manual FORM HEADWALL (floor mount) OVERVIEW The Form is a UL-listed configurable headwall system. This system includes multiple horizontal equipment channels integrated
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler
More information«Company» «Address1» «Address2» «City» Sub.: Purchase of Capsule Polishing Machine. 01 No. Detailed Specifications as given below.
INDIAN INSTITUTE OF INTEGRATIVE MEDICINE (Formerly known as RRL) (Council of Scientific & Industrial Research CANAL ROAD, JAMMU Phones: 0191-2569000, 2569001, to 10 (11 Lines) Telefax: 2569023, 2569019,
More informationSECTION EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 EZ-SLIDE 80 AND 180 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSECTION CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 CRL70 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS [OR WOOD] PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationInstallation Qualification Equipment (Reference SOP: )
Installation Qualification Equipment (Reference SOP: ) Project: Equipment Description: Project No: Serial No: Manufacturer: Model No: Equipment No: Location: Protocol: PROGRAM INDEX 1. OBJECTIVE...3 2.
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS 01 45 35.05 20 (September 2015) Change 1-02/18 ------------------------------------ Preparing Activity: NAVFAC UNIFIED FACILITIES GUIDE SPECIFICATIONS References are
More informationOAİB PRODUCT CONFORMANCE SPECIFICATIONS -PUMPS- e - m a i l : i n f t u r q u m. c o m
PRODUCT CONFORMANCE SPECIFICATIONS -PUMPS- M a h a t m a G a n d h i C a d. N o : 1 0 3 G. O. P. 0 6 7 0 0 A N K A R A P h o n e : 9 0-3 1 2-4 4 7 2 7 4 0 F a x : 9 0-3 1 2-4 4 7 0 1 8 0-4 4 6 9 6 0 5
More informationSECTION SOUND-ABSORPTIVE PANELS
SECTION 09 77 23 SOUND-ABSORPTIVE PANELS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 General Requirements apply. 1.2 SECTION INCLUDES
More informationUser Requirement Specifications
Page 1 of 18 User Requirement Specifications Fluid bed drier Equipment ID: T-FBD01 Page 2 of 18 Table of Contents 1.0 APPROVAL SIGNATURES 2.0 OVERVIEW 3.0 PROCESS DESCRIPTION 4.0 PRODUCTIVITY REQUIREMENT
More informationMOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY
PURCHASE ENQUIRY Inquiry No : MDG/PUR/PKS/ENQ/BT, Dated: April 17, 2014 Description Qty : Purchase Inquiry for Supply, Installation and commissioning and testing of fully automatic Butter Thermoforming,
More informationTechnical Specification for. Insulators. Part 1. Insulators for High and Extra-High Voltage Overhead Lines
Page: 1 / 18 for Insulators Part 1 Insulators for High and Extra-High Voltage Overhead Lines 1.2 Cap-and-pin insulators made of pre-stressed glass This technical specification is valid for the business
More informationSAN FRANCISCO PUBLIC UTILITIES COMMISSION INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURES
SAN FRANCISCO PUBLIC UTILITIES COMMISSION INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURES SECTION: SFPUC INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURE NO: 018 TITLE: SYSTEM TESTING AND START-UP APPROVED:
More informationSECTION SERVICE AND TELLER WINDOW UNITS
SECTION 08 56 59 SERVICE AND TELLER WINDOW UNITS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. See Pharmacy Service Window and Package
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More informationPHYSICAL FACILITIES Consultant s Handbook Specifications Division 07 Thermal and Moisture Protection 8400 Firestopping
1 General 1.1 The bidding requirements, contracting requirements, and applicable parts of Division 1 - General Requirements, as listed in the Table of Contents, shall be included in and made a part of
More informationProprietary Document Disclosure Restricted To Employees and Authorized Holders
Revision Level: A Page 1 o f 33 Revision Level: A Page 2 o f 33 (This page left blank intentionally.) Revision Level: A Page 3 o f 33 S i g n a t u r e P a g e Reviewed By Management Representative: 1
More informationIADC GLOBAL SUPPLY CHAIN COMMITTEE
IADC GLOBAL SUPPLY CHAIN COMMITTEE Manufacturing Record Book Guidance (GU-IADC-SC-004) Effective date 1-January-2017 Copyrighted 2016, IADC Unlimited license is hereby granted for reproduction of this
More informationSECTION GENERAL ELECTRICAL REQUIREMENTS PART 1- GENERAL
1.01 DESCRIPTION SECTION 16000 GENERAL ELECTRICAL REQUIREMENTS PART 1- GENERAL A. This Section includes the general provisions applicable to electrical work and testing of the completed electrical systems.
More informationC. Requirements of this Section relate to customized fabrication and installation procedures, not production of standard products.
SECTION 01400 QUALITY CONTROL SERVICES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and other Division-1 Specification
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationMAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE
ELECTRICAL SPECIFICATION 1453 DIVISION OF ENGINEERING DEPARTMENT OF TRANSPORTATION CITY OF CHICAGO REVISED MARCH 14, 2013 MAST ARMS: ALUMINUM, TRUSS TYPE AND DAVIT TYPE SUBJECT 1. This specification covers
More informationSPECIAL INSPECTION AGREEMENT
DEVELOPMENT SERVICES DEPARTMENT BUILDING AND SAFETY DIVISION 156 S. BROADWAY, SUITE 130 TURLOCK, CALIFORNIA 95380 PHONE 209-668-5560 FAX 209-668-5107 SPECIAL INSPECTION AGREEMENT PERMIT NUMBER: DATE: OWNER:
More informationRobotized Integrated Blister Line INTEGRA 220. Liquids Solids Creams Packaging ENGLISH
220 Robotized Integrated Blister Line Liquids Solids Creams Packaging ENGLISH 220 Robotized Integrated Blister Line A concentrate of innovation in less than 8 meters Robotized Blister Line, integrating
More informationL-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System
Version 5.22.13 L-SERIES: LTH3900 SPECIFICATIONS Stainless Steel Hollow Metal Sliding Fire Door System OPTIONS ARE LISTED IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT CONSULT MANUFACTURER
More informationReference No. RAMP/C/03-10/CQ
REPUBLIC OF CROATIA MINISTRY OF FINANCE TAX ADMINISTRATION REVENUE ADMINISTRATION MODERNIZATION PROJECT Reference No. RAMP/C/03-10/CQ Terms of Reference Technical Supervision of reconstruction and construction
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section AUTOMATIC CONTROL VALVE INSULATED ENCLOSURE (HOT BOX)
Section 15959 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and the installation of Automatic Control Valve Insulated Enclosures (Hot Boxes) for control valves installed on water lines
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION MODEL Ref:- LSL/8/H/C/T(900) Load 8 person. Power system - Hydraulic TECHNICAL SPECIFICATION TYPE OF LIFT Passenger RATED SPEED 0.6m/s LIFT MODEL LSL / 8 / H / C / T(900) CAPACITY
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION MODEL Ref:- LSL/8/H/C/T(800) Load 8 person. Power system - Hydraulic TECHNICAL SPECIFICATION TYPE OF LIFT Passenger RATED SPEED 0.6m/s LIFT MODEL LSL / 8 / H / C / T(800) CAPACITY
More informationSUGGESTED SPECIFICATION for Low Voltage (600V) Generator Paralleling Switchboard
SUGGESTED SPECIFICATION for Low Voltage (600V) Generator Paralleling Switchboard PART 1 GENERAL 1.1 Scope A. The intent of this specification is to provide power control for the parallel operation of generator
More informationInstruction manual of Fluidized Bed Reactor FBR diameter 250 mm and larger
Systeme für Aquakultur, Aquaristik, Labore und zur Wasseraufbereitung Systems for aqua culture, sea water aquaria, labs and water desalination and purification Systèmes pour aquacultur, aquariums eau de
More informationXxxxx Xxxxxx Autoclave Validation Data Logging System
Xxxxx Xxxxxx Autoclave Validation Data Logging System INSTRUCTION SHEET MQS5775/0117 Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info Autoclave Validation
More informationINSTRUCTIONS FOR CERTIFICATION OF FACTORY PRODUCTION CONTROL
. August 2017 were approved by Manager of Product Certification Bureau of the Polish Register of Shipping on 25 August 2017 Copyright by, 2017. GDAŃSK, AUGUST 2017 1/12 CONTENTS 1. Factory Production Control
More informationSpecial Inspections Instructions
Special Inspections Instructions Based on Chapter 17 of the 2012 International Building Code PURPOSE The purpose of this document is to familiarize the Owner, Engineer, Architect, Special Inspector, Testing
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION MODEL Ref:- LSL/13/RT/H/S/F(1100) Load 13 person. Power system - Hydraulic TECHNICAL SPECIFICATION TYPE OF LIFT Passenger RATED SPEED 0.6m/s LIFT MODEL LSL / 13 / RT / H / S / F(1100)
More informationAutomatic inspection for vials, ampules and cartridges
CS-series Automatic inspection for vials, ampules and cartridges CS-Series Purity and sterility of parenterals vital to patients health. In the pharmaceutical industry, quality standards are becoming more
More informationFire Protection Contractor QA/QC Plan Sample
Fire Protection Contractor QA/QC Plan Sample Selected pages (not a complete plan) QA/QC Plan Sample Project-Specific Quality Plan Quality Manual Fire Protection Standards & Inspection Forms Contact: Ed
More informationBROADCAST: M BLOCKS, PLUGS, PLANKS NEW PRODUCT LAUNCH Date: June 16, 2016 Issued by: George Yoshida, Ted Colwell
BROADCAST: M16-001 BLOCKS, PLUGS, PLANKS NEW PRODUCT LAUNCH Date: June 16, 2016 Issued by: George Yoshida, Ted Colwell TITLE: DESCRIPTION: NEW PRODUCT LAUNCH 3M FIRE BARRIER BLOCKS, PLUGS AND PLANKS 3M
More informationTUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME
TUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME Copyright TUV SUD BABT 2017 A Certification Body of: Page 1 of 33 Contents AMENDMENT RECORD 3 0. INTRODUCTION 3 1. PRE-CONDITIONS TO SUPPORT PRODUCTION
More informationMETAL FABRICATION..1 General Conditions and Division 1 shall govern Work of this section.
CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 05500-1 PART 1 GENERAL 1.1 Description of Work.1 General Conditions and Division 1 shall govern Work of this section. 1.2 Quality Assurance.1 Personnel:.1
More informationA CHECKLIST FOR QUALITY. Seven Questions to Gauge Quality in Metal Stamping Suppliers
A CHECKLIST FOR QUALITY Seven Questions to Gauge Quality in Metal Stamping Suppliers The Value of Quality Quality. It s the #1 concern for OEM engineering and purchasing managers when evaluating and measuring
More informationA. The purpose of this section is to specify Division 23 responsibilities in the commissioning process.
SECTION 23 99 50 - (ADD#4) PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationSCOPE OF WORK SUBSTATIONS
Page 2 of 11 REVISION CONTROL Issued for Internal Review Issued for Client Review Issued for DFS REVISION HISTORY Revision Date Pages Revised Remarks 00 29/08/2017 Multiple Comments incorporated 01 05/04/2018
More informationSQ-1 INTELLIGENT ROOF
SQ-1 INTELLIGENT ROOF ROOF TRUSS TABLE With Intelligent Gantry. Zone Eject Automated Jigging TRUSS TABLE Operators Manual FOREWORD This manual explains the proper maintenance of Square 1 Design Roof Truss
More informationProject Address: Name of Person Completing Form:
Statement of Inspections This form is provided as a way to list aspects of the project that require special inspection and testing in accordance with IBC Sections 107.1, 1704, and 1705 and define duties
More informationSCHEDULE [NUMBER NAME OF WORK UNIT/WORK PACKAGE] TO THE IN-KIND CONTRIBUTION AGREEMENT SIGNED BETWEEN ESS AND PARTNER ON DATE
1 (11) TA Template V3.0 SCHEDULE [NUMBER NAME OF WORK UNIT/WORK PACKAGE] TO THE IN-KIND CONTRIBUTION AGREEMENT SIGNED BETWEEN ESS AND PARTNER ON DATE 1. SCOPE This document describes the Scope of Work
More informationCLEANING IN MEDICAL INDUSTRY
CLEANING AND SURFACE PROCESSING CLEANING IN MEDICAL INDUSTRY Hannes Köble, Sales parts2clean expert forum 2016 www.durr.com OVERVIEW 1. Parts / Requirements 2. Validation and qualification Machine equipment
More informationSECTION PROJECT CLOSEOUT
PART 1 - GENERAL 1.01 SCOPE OF WORK A. This Section specifies administrative and procedural requirements for project closeout, including but not limited to: 1. Close-out procedures 2. Final cleaning 3.
More informationSECTION COPPER/ SOLDERED RF SYSTEM SPECIFICATIONS
SECTION 13096 COPPER/ SOLDERED RF SYSTEM SPECIFICATIONS Prepared by: NELCO 125 Chenoweth Lane, Ste. 206 Louisville, KY 40207 (502) 899-3726 13096-1 SECTION 13096 COPPER RADIO FREQUENCY SHIELDING ENCLOSURE
More informationFORM FOOTWALL. FORM FOOTWALL (floating) (floating) Installation Manual
FORM FOOTWALL (floating) Installation Manual FORM FOOTWALL (floating) OVERVIEW The Form is a UL-listed configurable footwall system. This system can include any combination of base cabinets, upper cabinets,
More informationConveyor System Technology. krones AirCo. Air Conveyor
Conveyor System Technology krones AirCo Air Conveyor Gentle Product Conveyance The krones AirCo conveyor links the systems of a bottling line, and provides an important integral part of a smoothly running
More informationINSTALLATION MANUAL RECTANGULAR COLUMN
INSTALLATION MANUAL RECTANGULAR COLUMN Model # 5502 OVERVIEW The Rectangular Column is a UL-listed, multi-sided, vertical hospital modular service assembly. This system uses vertical and/or horizontal
More informationBFS IOA BFS Training 2018 Kunming Qualification and Validation of a BFS-Installation including CIP/SIP
Qualification and Validation of a BFS-Installation including CIP/SIP Presented by Christoph Bohn and Stefan Kiesel Director Rommelag Pharma Service Senior Manager Rommelag Pharma Service Coyright BFS IOA
More informationFABRICOIL BASIC January 10, 2006
FABRICOIL BASIC January 10, 2006 General Notes: This guide specification document is provided by Raynor Door for use by design professionals in preparing project specification documents for FABRICOIL BASIC
More informationTranslation authorised by DIBt. to: 1 December January 2017 I /16
Date: Reference: 24 January 2017 I 29-1.21.1-23/16 Approval number: Z-21.1-1711 Validity from: 1 December 2016 to: 1 December 2021 Applicant: fischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal
More informationCity of San Mateo Clean Water Program Programmable Logic Controller (PLC) and Human Machine Interface (HMI) Programming Services
ATTACHMENT A SAMPLE SCOPE OF SERVICES PLC & HMI PROGRAMMING City of San Mateo Clean Water Program Programmable Logic Controller (PLC) and Human Machine Interface (HMI) Programming Services December, 2017
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationGLOBAL INDUSTRIAL WATER
MANUFACTURING FACILITY, TAMPA, FL USA 5321 West Crenshaw Street Tampa, FL 33634 USA 1 P age Trade Name: GENERAL INFORMATION Global Industrial Water Inc. (GIW) Date Incorporated: January 16 th, 2009 Factory
More informationKE Durasol Awnings. Division of the BAT USA SECTION GENNIUS ALUMINUM FABRICATED ENGINEERED STRUCTURES
KE Durasol Awnings Division of the BAT USA SECTION 133400 GENNIUS ALUMINUM FABRICATED ENGINEERED STRUCTURES DESCRIPTION The Gennius is a retractable cover system custom made to protect against sun and
More informationSERVICE PEDESTAL FLOOR-MOUNTED SERVICE PEDESTAL. Installation Manual
SERVICE PEDESTAL Installation Manual FLOOR-MOUNTED SERVICE PEDESTAL Figure 1. DEFINITION OF STATEMENTS Statements in this manual preceded by the following words are of special significance: WARNING: Means
More informationUniversity of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 075423 - TPO
More informationSECTION A. Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 084239 PRESSURE-RESISTANT ENTRANCES **Note to Specifier** This specification contains component and configuration options. Where indicated choose the appropriate choice for your specific
More informationMissouri Army National Guard (RTI) MOARNG Project No. T Rev. 0 Ft. Leonard Wood, Missouri 15 April 2013 Bid Final Submittal
SECTION 142100 - ELECTRIC TRACTION ELEVATORS PART 1 - GENERAL 1.1 SUMMARY A. Section includes electric traction passenger elevators. 1.2 ACTION SUBMITTALS A. Product Data: Include capacities, sizes, performances,
More informationOPERATION AND MAINTENANCE MANUAL
OPERATION AND MAINTENANCE MANUAL Type mcr PLD Gdańsk 06.12.2012. Version PLD 06.12.12 DEPARTMENT OF FIRE VENTILATION SYSTEMS GDAŃSK 2012 1 TABLE OF CONTENTS 1. INTRODUCTION 2. SUBJECT OF DOCUMENTATION
More informationTÜV SÜD BABT Production Quality Certification Scheme
TÜV SÜD BABT Production Quality Certification Scheme The Production Quality Certification Scheme for Manufacturers A Certification Body of Copyright TÜV SÜD BABT 2014 Page 1 of 38 CONTENTS Page AMENDMENT
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationINS QA Programme Requirements
Specification Date: 20/3/17 INS QA Programme Requirements UNCONTROLLED WHEN PRINTED Author: J Cooch AUTHORISATION Date: 20/3/17 A Brown Owner: J Cooch (Signature) N.B. only required for hard copy If issued
More informationMachine Specification
Machine Specification Machine Type: 1230A 2 Component: 1x Base 1x Hardener Adhesive pump system Table of Contents 1230A Machine Specification ------------------------------------------------------------
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationARCHITECTURAL SPECIFICATIONS
ARCHITECTURAL SPECIFICATIONS CIG JAN PRODUCTS LTD VISUAL DISPLAY BOARDS Part 1-General 1.01 RELATED DOCUMENT A. The provision of the General Conditions. Supplementary Conditions and the Sections included
More informationSECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
More informationHOLLOW METAL DOORS AND FRAMES SECTION HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL
13686.00 HOLLOW METAL DOORS AND FRAMES 081113-1 SECTION 081113 - HOLLOW METAL DOORS AND FRAMES 1.1 RELATED DOCUMENTS: PART 1 - GENERAL A. Drawings and general provisions of Contract, including General
More informationSECTION FUEL-FIRED UNIT HEATERS
SECTION 23 55 33 PART 1 - GENERAL 1.1 DESCRIPTION A. This Section includes gas-fired unit heaters. SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable
More information