Clamps INNOVATIVE FLUID POWER NEW! U-Bolt Clamps HRRBS Series (see page 95) Line Sizes from 3/4 to 16 O.D.

Transcription

1 Clamps Overview Standard Solutions HYDAC Manufactures a complete line of hose, tube, and pipe mounting components. For many years, these products have been successfully applied, worldwide. Our standard product offering includes: UBolt Clamps HRRBS Series (see page 9) Line s from / to O.D. DIN 0 Clamps HRL, HRS, HRZ, HREL, & HRES Series (see pages 7 89) Line s from / to O.D. UBolt with Cushion Clamps HUB Series (see pages 9) Line s from / to O.D. Oval Clamps HROS Series (see page 97) Line s from / to O.D. Flat Cushion Clamps HOM Series (see page 90) Line s from / to O.D. P Style Clamps HSPN Series (see page 98) Line s from / to O.D. Cushion Clamps CUSH Series (see pages 9 9) Line s from / to / O.D. Mount on standard /8 x 7/8 unistrut mounting rail Quick Release Swivel Bolt Clamps HRGKSM Series (see pages 99 00) Line s from. to 7.87 O.D. Buegu HRBGS Series (see pages 9 9) Line s from / to / O.D. NEW! Clamp Sample Kit P/N INNOVATIVE FLUID POWER

2 Clamps Custom Solutions HYDAC is also a market leader in providing custom mounting solutions. Our engineers work with yours to develop unique solutions that save time and money by simplifying inventory and installation. From simple modifications of standard product to custom bracketry, we will provide you a successful solution for your application. For more information on custom solutions, please contact product management at 877GO HYDAC. Series Strip Clamps HRRL & HRRLE Series (see page 0) Line s from to. mm O.D. Band Straps (see page 0) Length Ranges from 87 to mm Series Strip Clamp &Custom Bracketry Custom Molded Hose Bundle Stacking Series Strip Run Cylinder / Tube Clamp Series Strip Clamp & Custom Mounting Plates INNOVATIVE FLUID POWER 7

3 DIN 0 Clamps Overview HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. Series HRL Standard Duty (see pages 7 7) Available to tube outside diameter. Recommended for systems with less than 00 PSI operating pressure and no dynamic loads. Bore Styles Standard duty, heavy duty, and twin series are available with either ribbed bores (standard) or smooth bore (special order). When ordering a smooth bore arrangements or clamp pairs, a G is inserted in the code directly after the HR i.e. HRGL, HRGS, and HRGZ HRS Heavy Duty (see pages 77 78) Available to nominal pipe size Recommended for systems with greater than 00 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations. Ribbed Bore (standard) Arrangements Various arrangements are available in each series. Smooth Bore smooth surface and chamfered edge prevent chaffing of hose (special) HRZ Twin (see pages 79 80) Available to / nominal pipe size Recommended for systems with less than 00 PSI operating pressure and no dynamic loads HREL Standard Duty w/ Rubber Insert (see pages 8 8) Available to tube outside diameter Recommended for systems with less than 00 PSI operating pressure and no dynamic loads Provide for greater noise reduction and resistance to axial movement HRES Heavy Duty w/ Rubber Insert (see pages 8 8) Heavy duty available to / bore diameter Provide for greater noise reduction and resistance to axial movement Weld Plate Crail Stacking Mounting Mounting Modules & Kits Materials Metal components are carbon steel (standard). Stainless steel is also available (see page 8 for details). Metal components to be welded (weld plates and crails) and heavy duty top plates size 8 are phosphate coated, while all other metal components are zinc plated. Clamp pairs are polypropylene (standard). Polyamide and aluminum clamp pairs are also available. For specifications on these materials, see page 7. Ordering Clamps can be ordered as complete arrangements, or separate components. See each series for details. 7 INNOVATIVE FLUID POWER

4 Technical Specifications DIN 0 Clamps Mounting Guidelines The first clamp should be mounted directly after the threaded connection or coupling. This protects the connection from vibrations. Bends in the line should be clamped on BOTH sides of the bend. The line should be clamped directly before and after any inline valves. Proper Torquing of the clamp bolts is important, and is part of the DIN 0 Standard (see the chart below right for torque information) L Distance Between Clamps Pipe Distance (L) Tube Distance (L) / / / /8 / / /8 / 7 / / 8 /8 0 / / 0 7/8 / 7 / 7 / 7 7 Bolt Tightening Torque Specifications Series Thread PP PA AL HRL (Std. Duty) 0 to /0 8 0 HRS (Heavy Duty) HRZ (Twin) & /8 0 0 /8 7/ 0 0 /8 0 / / M M M /0 to /8 /8 8 8 Note: Torque is given in Nm (Nm x 0.77 = Ftlbs) Properties of Materials (clamp pairs) Properties Polypropylene PP Polyamide PA Aluminum AL Mechanical Properties Tensile Strength 00 psi psi Flexural Yield Strength 700 psi 000 psi Impact Strength (Izod Method) No Failure No Failure Tensile Test 8000 psi Brinell Hardness No. 0 BHN Modules of Elasticity 9.7 x 0. x 0 psi Thermal Properties Continuous Service Temperature Range Electrical Properties Volume Resistivity Chemical Properties Chemical Resistance to 9 F 0 to 90 C 0 to 8 F 0 to 0 C 7 to 00 F to 0 C 0 Ohmcm 0 Ohmcm Resistant to most aqueous solutions of inorganic salts, minerals, and organic acids, even at high temperatures. Resistant to organic solvents, dilute acids, and bases. Resistant to radiation. Resistant to neutral and sea water, organic acids, esters, oils, and inorganic salt solutions. INNOVATIVE FLUID POWER 7

5 HRL Series Standard Duty Clamps DIN 0 Clamps D 7 A Single Clamp with Weld Plate A Single Clamp without Weld Plate ATM Single Clamp for CRail Mounting (order CRail separately) D Single Clamp Stacking Module (size to only) A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page 87 to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Series HRL = Standard duty single clamp with ribbed bore HRGL = Standard duty single clamp with smooth bore Family 0 to 8 (refer to table A on next page) (size 7 and 8 available in Metric only) Arrangement A = Single clamp with top plate and weld plate A = Single clamp without weld plate ATM = CRail mounted clamp D = Single clamp stacking module (size only) Bore (in mm) (refer to table A on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum (not available for size 0) Metal Component Material (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRL A.7 PP UNC s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. 7 INNOVATIVE FLUID POWER

6 DIN 0 Clamps Dimensions 0 s CRail Nut CRail. () A.9 (0).7 (9.). () A A /" 0 UNC 9 (0). () H ø D H ø D H.9 (.) Plastic Cap H.08 (). (). () A.8 (0). () A.8 (0).0 () ø.9 (ø 0).9 ().0 (8). Table A 0 7 Recommended ød Bore Nominal Bolt Weight A A A H H Arrangement in mm Tube O.D. Pipe A B / / / / / / / / / 0..7 / / / / / / / / /.7. / / /.87 7 / (0).8 (8) N/A.8 (0).0 (8) 0. (). () 0.79 (0). (). () 0.) (). ().0 (). ().7 (0) 0.77 (9.). (9).0 ().97 (0).89 (8) 0.8 (.).9 ().7 (0). (9). (7) 0.9 ().89 (8).0 ().8 (7).7 (70). (). ().0 (). (88).8 (8). ().8 (7) /0 x / (M x 0) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x ) /0 x / (M x 0) /0 x / (M x 70) 0. (0.0) 0. (0.0) 0.8 (0.08) 0. (0.0) 0.7 (0.) 0. (0.07) 0. (0.) 0. (0.0) 0. (0.) 0.7 (0.) 0. (0.9) 0. (0.) 0. (0.) 0.0 (0.8).7 (9).8 (). (8). (.).7 (0) (M x 00) () ().7 (.9). (7.). () (M x ) () () Note: Other bore diameters are available Consult factory for details. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg). INNOVATIVE FLUID POWER 7

7 DIN 0 Clamps HRS Series Heavy Duty Clamps A S Single Clamp with Weld Plate S Single Clamp without Weld Plate STM Single Clamp for CRail Mounting (size to only) (order CRail separately) A Single Clamp Stacking Module (size to only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page 88 to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate Series HRS = Heavy duty single clamp with ribbed bore HRGS = Heavy duty single clamp with smooth bore Family to 0 (refer to table B on next page) Arrangement S = Single clamp with top plate & weld plate S = Single clamp without weld plate STM = CRail mounted clamp (sizes only) A = Single clamp stacking module (sizes only) Bore (in mm) (refer to table B on next page) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Metal Component Material (omit) = Carbon Steel A = Stainless Steel Thread Type UNC = Standard M = Metric HRS S.7 PP UNC s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. 77 INNOVATIVE FLUID POWER

8 DIN 0 Clamps Dimensions All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A S ø.7 (ø 8) /8" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ø D H.79 (0). (.). ().9 (). (.) S. ().87 ().8 (7). (8.) Table B A A ød Bore Recommended Nominal in mm Tube O.D. Pipe / / /8 / /8 / 7/8 / / / / / / / / / / 7/8 B /8 / /8 / / / / / / / ø.98 (ø ) A A A B H H S Bolt.0 ().77 (). (0). (90.).80 (). (8) 8.07 (0) 0. (). (9).0 () Note: Other bore diameters are available Consult factory for details. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg)..87 (7). (8).9 (00). (0) 7.09 (80) 8.8 () 0. (70).9 (0) 0.7 (0).77 (80).7 ().7 (70). (8). ().98 () 8.07 (0) 9.9 ().0 (0) 8. ().80 (0) ø.98 (ø ).8 (8).8 (0).8 (0).77 (). (0). (80). (90).7 (0).0 (0) 7.09 (80) 0.9 (). ().0 (8).7 ().7 (70).9 (00). ().0 (0) 9. (). (9).89 (8). ().99 (7). (0). (0) 7.87 (00) 9.0 (0).0 (0) 8.0 (70). (90) INNOVATIVE FLUID POWER 78.7 (0) 0. (8) 0. (8) 0. (8) 0.9 (0) 0.9 (0) 0.9 () 0.9 () 0.98 ().8 (0).8 (0).0 () /8 x / (M0 x ) /8x/ (M0 x 0) /8 x / (M0 x 70) 7/ x (M x 00) /8 x / (M x 0) /0x7/ (M0 x 90) 7/89x8/ (M0 x 0) M0 x 00 M0 x 0 M0 x 0

9 DIN 0 Clamps HRZ Series Twin Clamps D A Twin Clamp with Weld Plate A Twin Clamp without Weld Plate ATM Twin Clamp for CRail Mounting (order CRail separately) D Twin Clamp Stacking Module A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page 89 to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate 79 Series HRZ = Standard duty twin clamp with ribbed bore HRGZ = Standard duty twin clamp with smooth bore Family 0 to (refer to table C on next page) Arrangement A = Twin clamp with weld plate A = Twin clamp without weld plate ATM = CRail mounted twin clamp D = Twin clamp stacking module Bore (in mm) (refer to table C on next page) Clamp Material PP = Polypropylene PA = Polyamide INNOVATIVE FLUID POWER HRZ A PP UNC Thread Type UNC = Standard M = Metric s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available.

10 DIN 0 Clamps Dimensions All s CRail Nut CRail /" 0 UNC H H ø ø dd ø ø dd.9 (.) Plastic Cap 9 (0).08 (). () H. ().0 () A A A.8 (0).0 () ø.9 (ø 0)..9 ().0 (8) Table C Ød Bore in mm Tube O.D. Pipe / / / / / / 0..7 / / / / / / / / / / Recommended Nominal A A A H H H Bolt 0.79 (0). (9). ().77 ().0 () Note: Other bore diameters are available Consult factory for details. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg).. (7).7 ().7 (70). (8). (0). ().09 (). (7). (8).7 (0) 0.7 (8.) 0.7 (8) 0.9 (.).0 (). ().0 (7).0 (). (7). (). ().9 ().7 (.). (.). (9.).8 (7.) /0 x / (M x ) /8 x / (M8 x ) /8 x / (M8 x ) /8 x (M8 x 0) /8 x / (M8 x 0) INNOVATIVE FLUID POWER 80

11 DIN 0 Clamps HREL Series Standard Duty Clamps with Rubber Inserts A Single Clamp with Weld Plate A Single Clamp without Weld Plate ATM Single Clamp for CRail Mounting (order CRail separately) D Single Clamp Stacking Module (not available for size 0) A + D Order one A (red) arrangement and one D (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page 87 to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate 8 Rubber Insert 8 Series Family, (refer to table D on next page) Arrangement A = Single clamp with top plate and weld plate A = Single clamp stacking kit ATM = CRail mounted clamp D = Single clamp stacking module (not available for size 0) Bore (in mm) (refer to table D on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Components Materials (omit) = Carbon Steel A = 0 Stainless Steel A = Stainless Steel INNOVATIVE FLUID POWER HREL A.7 PP Thread Type UNC = Standard M = Metric s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. UNC

12 DIN 0 Clamps Dimensions All s CRail Nut CRail A A S /" 0 UNC ød.9 (.) 9 (0). () ød ød H Plastic Cap.08 (). () H A.8 (0) S.0 () ø.9 (ø 0)..9 ().0 (8) Table D Clamp / L / L EERubber Insert Recommended Nominal Bore ød Tube Pipe Hose O.D. in mm O.D. Min (in) Max (in) / / / / / / / / / /.. ød ød H H A A A S Bolt Note: Other bore diameters are available Consult factory for details. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg)..00 (.). (9). ().8 () 0.9 (.).0 (.).8 (7).80 (7).7 (0).0 (). (9). (88). (7).9 (8) 0.8 () 0.8 () /0 x / (M x ) /0x / (M x 70) Parts KP = Clamp Pair EE = Rubber Insert (Santoprene TPE 7) KP Series, (refer to table above) Clamp Pair Clamp Material PP = Polypropylene PA = Polyamide HREL KP PP EE Series* HRES / L EE / L, / L (refer to table above) Rubber Insert Bore (in mm) (refer to table above) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page 87 for details. * HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. INNOVATIVE FLUID POWER 8

13 DIN 0 Clamps HRES Series Heavy Duty Clamps with Rubber Inserts S Single Clamp with Weld Plate S Single Clamp without Weld Plate STM Single Clamp for CRail Mounting (size to only) (order CRail separately) A Single Clamp Stacking Module (size to only) S + A Order one S (red) arrangement and one A (black) arrangement separately. A maximum of stacking modules is recommended Parts Legend (see page 88 to order parts separately) Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate 8 Rubber Insert 8 Series Family to 7 (refer to table E on next page) Arrangement S = Single clamp with weld plate S = Single clamp stacking kit STM = CRail mounted clamp A = Single clamp stacking module Bore (in mm) (refer to table E on next page) Clamp Material PP = Polypropylene PA = Polyamide Metal Component Material (omit) = Carbon Steel A = Stainless Steel INNOVATIVE FLUID POWER HRES S PP Thread Type UNC = Standard M = Metric s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. UNC

14 DIN 0 Clamps Dimensions All s CRail Nut (sizes ) CRail Nut (size ) CRail (all sizes) A A ød S ø.7 (ø 8) /8" UNC ø.79 (ø 0) 7/" UNC.0 (.7) H ød ød H.79 (0). (.). ().9 (). (.). ().8 (7).87 (). (8.) Table E Clamp / L / L 7 7 A EERubber Insert Recommended Nominal Bore ød Tube Pipe Hose O.D. in mm O.D. Min (in) Max (in) B / / /8 / 7/8 / / / S /8 /8 / / / / / ø.98 (ø ) ød ød B H H A A A S Bolt.00 (.). (9). ().0 (89).7 ().0 () Note: Other bore diameters are available Consult factory for details. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg).. ().8 ().9 (7).8 (98).0 (). (8).8 (0).8 (0).77 (). (0). (80). (90) ø.98 (ø ) 0.9 (.).0 (.). (.).70 (8.).88 (98.).7 (.).8 (7).80 (7). (07).9 (7) 7.7 (97) 8.9 (7).7 (0).0 (). (90.).80 (). (8) 8.07 (0). (9). (88). (0) 7.09 (80) 8.8 () 0. (70). (7).9 (8). ().98 () 8.07 (0) 9.9 ().7 (0) 0.8 () 0.8 () 0.9 (0) 0.9 (0) 0.9 () 0.9 ().0 () /0 x / (M x ) /0x / (M x 70) 7/x (M x 00) /8x / (M x 0) /0x7 / (M0 x 90) 7/89x8 / (M0 x 0) KP = Clamp Pair KP Series to 7 (refer to table above) Clamp Pair Clamp Material PP = Polypropylene PA = Polyamide HRES KP PP EE = Rubber Insert (Santoprene TPE 7 sizes ) (Buna NBR 70 sizes 7) HRES / L EE.9 EE Series / L to 7 (refer to table above) Rubber Insert Bore (in mm) (refer to table above) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. Note: All other components for these clamps are the same as for HRS series heavy duty single clamps. Refer to page 88 for details. * HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. INNOVATIVE FLUID POWER 8

15 DIN 0 Clamps HRL & HRS Series with Stainless Steel Metal Components HRL Standard Duty Description HRS Heavy Duty Clamps with stainless steel metal components are available for corrosive environments. Our complete line of DIN 0 clamps are available in stainless steel. Some models are special order, which may require minimum quantities, and/or extended delivery times. Listed here are the standard duty and heavy duty single clamps with weld plate. 0 Stainless Steel: (A) Available from stock UNC bolts Stainless Steel: (A) Salt water resistance HRL sizes in UNC available from stock HRS sizes in UNC Larger sizes in metric only Typical Arrangement Single Clamp with Weld Plate (HRL...A...) for Standard Duty (HRS...S...) for Heavy Duty Hex Head Bolts (SCREW H) Top Plate (DP) Clamp Pair (KP) Weld Plate (AP) Perfect for your Offshore Applications! Stainless Steel UNC Stocked Program Light Duty Series (HRL) Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws Screw H /0 x. SS Screw H /0 x.0 SS Screw H /0 x.0 SS Screw H /0 x.7 SS Screw H /0 x.0 SS Heavy Duty Series (HRS) XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page 7 for available bore sizes Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC Weld Plates HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC Top Plates HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Ext Hex Screws Screw H /0 x. SS Screw H /0 x.0 SS Screw H /0 x.0 SS Screw H /0 x.7 SS Screw H /0 x.0 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page 78 for available bore sizes CRail Nuts (TM) CRail (TS) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. 8 INNOVATIVE FLUID POWER

16 DIN 0 Clamps HRL Standard Duty 0 stainless steel (A) metal components Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws ( Stainless Steel) SCREW H /0 x. SS SCREW H /0 x.0 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS SCREW H /0 x.0 SS SCREW H /0 x.7 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page 7 for available bore sizes HRL CRail HRL TS 8 x A M 009 HRL CRail Nuts HRL 0 TM / UNC A 0070 stainless steel (A) metal components Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M Weld Plates HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Hex Head Bolts SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX70 A XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page 7 for available bore sizes HRS Heavy Duty stainless steel (A) metal components Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A M HRS S XX PP A M HRS S XX PP A M HRS S XX PP A M HRS S XX PP A M HRS S XX PP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Weld Plates Top Plates Hex Head Bolts SCREW H M0X A SCREW H M0X0 A SCREW H M0X70 A SCREW H MX00 A SCREW H MX0 A SCREW H M0X90 A HRS CRail XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page 78 for available bore sizes HRS TS 0X A M 009 HRS TM 0 A M HRS TM A M HRS CRail Nuts s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. INNOVATIVE FLUID POWER 8

17 DIN 0 Clamps HRL Series Parts All metal components are carbon steel. For stainless steel metal components please refer to page 8 8. ST = Carbon Steel, BL = Phosphate coated, ZN = Zinc Plated UNC Threads UNC Hex Head Bolts 0 SCREW H / 0 x. GR SCREW H / 0 x. GR SCREW H / 0 x.0 GR SCREW H / 0 x.0 GR SCREW H / 0 x.7 GR SCREW H / 0 x.0 GR SCREW H / 0 x.7 GR DP = Top Plate 0 HRL 0 DP ST ZN HRL DP ST ZN HRL DP ST ZN HRL DP ST ZN HRL DP ST ZN HRL DP ST ZN HRL DP ST ZN AP = Weld Plate 0 HRL 0 AP ST UNC BL HRL AP ST UNC BL HRL AP ST UNC BL HRL AP ST UNC BL HRL AP ST UNC BL HRL AP ST UNC BL HRL AP ST UNC BL SIP = Safety Plate 0 HRL 0 SIP ST ZN Metric Threads UNC Threads Metric Hex Head Bolts 0 SCREW H M X SCREW H M X SCREW H M X 8.8 SCREW H M X SCREW H M X 8.8 SCREW H M X SCREW H M X AF = Stacking Bolt HRL AF ST UNC HRL AF ST UNC HRL AF ST UNC HRL AF ST UNC HRL AF ST UNC HRL AF ST UNC 7 TM = CRail Nut 0 HRL 0 TM/ ST UNC KAP 0 HRL 0 TM ST ZN KAP TS = CRail Model code 9 HRL TS 8x ST BL M 78 HRL TS 8x ST BL M Parts Legend Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate 8 Rubber Insert KP = Clamp Pair EE = Rubber Insert (Santoprene TPE 7) HRL KP 0 PP Series 8 0 to (refer to table A, page 7) Clamp Pair Bore (in mm) (refer to table A, page 7) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Series HRES / L EE / L, / L (refer to table page 8) Rubber Insert Bore (in mm) (refer to table page 8) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. 87 INNOVATIVE FLUID POWER

18 DIN 0 Clamps HRS Series Parts All metal components are carbon steel. For stainless steel metal components please refer to page 8 8. ST = Carbon Steel, BL = Phosphate coated, ZN = Zinc Plated UNC Threads UNC Hex Head Bolts SCREW H /8 x.7 GR SCREW H /8 x. GR SCREW H /8 x.7 GR SCREW H 7/ x.00 GR SCREW H /8 x.0 GR SCREW H / 0 x 7.0 GR 7 SCREW H 7/8 9 x 8.0 GR 8 N/A (size 8 metric only) DP = Top Plate HRS DP ST ZN HRS DP ST ZN HRS DP ST ZN HRS DP ST ZN HRS DP ST ZN HRS DP ST BL 7 HRS 7 DP ST BL 8 HRS 8 DP ST BL AP = Weld Plate HRS AP ST UNC BL HRS AP ST UNC BL HRS AP ST UNC BL HRS AP ST UNC BL HRS AP ST UNC BL HRS AP ST UNC BL 7 HRS 7 AP ST UNC BL 8 HRS 8 AP ST UNC BL SIP = Safety Plate HRS SIP ST ZN HRS SIP ST ZN HRS SIP ST ZN HRS SIP ST ZN HRS SIP ST ZN Metric Threads UNC Threads Metric Hex Head Bolts SCREW H M0 X 8.8 SCREW H M0 X SCREW H M0 X SCREW H M X SCREW H M X SCREW H M0 X SCREW H M0 X SCREW H M0 X AF = Stacking Bolt w/ Washer HRS AF ST UNC HRS AF ST UNC HRS AF ST UNC HRS AF ST UNC HRS AF ST UNC 7 TM = CRail Nut HRS TM/8 ST UNC BL HRS TM7/ ST UNC BL TS = CRail 9 HRS TS 0x ST BL M 78 HRS TS 0x ST BL M Parts Legend Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate 8 Rubber Insert KP = Clamp Pair EE = Rubber Insert (Santoprene TPE 7 sizes ) (Buna NBR 70 sizes 7) HRS KP.7 PP HRES / L EE.9 Series 8 to 8 (refer to table B, page 78) Clamp Pair Bore (in mm) (refer to table B, page 78) Clamp Material PP = Polypropylene PA = Polyamide AL = Aluminum Series / L to 7 (refer to table page 8) Rubber Insert Bore (in mm) (refer to table page 8) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. INNOVATIVE FLUID POWER 88

19 HRZ Series Parts DIN 0 Clamps UNC Threads UNC Hex Head Bolts SCREW H / 0 x. GR SCREW H / 8 x. GR SCREW H / 8 x.7 GR SCREW H / 8 x.00 GR SCREW H / 8 x.0 GR DP = Top Plate HRZ DP ST ZN HRZ DP ST ZN HRZ DP ST ZN HRZ DP ST ZN HRZ DP ST ZN AP = Weld Plate HRZ AP ST UNC BL AntiTurn HRZ AP ST UNC BL AntiTurn HRZ AP ST UNC BL AntiTurn HRZ AP ST UNC BL HRZ AP ST UNC BL SIP = Safety Plate HRZ SIP ST ZN HRZ / SIP ST ZN Metric Threads UNC Threads Metric Hex Head Bolts SCREW H Mx MM 8.8 DIN 9 SCREW H M8x MM 8.8 DIN 9 SCREW H M8x MM 8.8 DIN 9 SCREW H M8x0 MM 8.8 DIN 9 SCREW H M8x0 MM 8.8 DIN 9 AF = Stacking Bolt w/ Washer HRZ AF ST UNC HRZ AF ST UNC HRZ AF ST UNC HRZ AF ST UNC HRZ AF ST UNC 7 TM = CRail Nut HRZ TM/ ST UNC KAP HRZ / TM/ ST UNC ORing TS = CRail 9 HRL TS 8x ST BL M 78 HRL TS 8x ST BL M Parts Legend Hex Head Bolt Clamp Pair Top Plate Stacking Bolt Weld Plate 7 CRail Nut Safety Plate KP = Clamp Pair Series HRZ KP 9.9. PP 0 to (refer to table C, page 80) Clamp Pair Bore (in mm) (refer to table C, page 80) Clamp Material PP = Polypropylene PA = Polyamide s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability. Not all combinations are available. 89 INNOVATIVE FLUID POWER

20 Standard Clamps HOM Series F Dimensions D E A B C Description The interlock edge insures that the cushion remains in place. The HOM Series clamp assembly retains, guides, protects and uniformly spaces line runs. They go up fast, lines are rigid, and look neat. Features Attached with two standard* fasteners to any flat surface, the HOM Series clamp eliminates the use of specials channels, providing a savings in both space and cost. Low profile for limited space applications. Materials The Clamp Available in steel (with electrodichromate finish), and 0 stainless steel (A in the model code denotes 0 stainless steel). The Cushion Manufactured from a thermoplastic elastomer, it s built tough to withstand the effects of most oils, chemical and industrial cleaning compounds, in temperatures from 0 to 7 F. *Note: Fasteners not provided. Part Number HOM /T HOM /T A HOM /8T HOM /8T A HOM /T /P HOM /T /P A HOM /8/8P HOM /8/8P A HOM /T HOM /T A HOM 7/8 /P HOM 7/8 /P A HOM T HOM T A HOM /P HOM /P A HOM /8T HOM /8T A HOM /T HOM / A HOM P HOM P A HOM /8T HOM /8T A HOM /T HOM /T A HOM /8T HOM /8T A HOM /P HOM /P A HOM /T HOM /T A HOM 7/8T /P HOM 7/8T /P A HOM T HOM T A HOM /8T HOM /8T A HOM /8T P HOM /8T P A Copper & Steel Tubing O.D. Copper Water Pipe Pipe A B C D E F / /8 / / /8 / /8 / / / / /8 / / / / / /8 / / /8 / / / /8 / / / HOM /8T / Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs./(kg.) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 90

21 Standard Clamps CUSH Series Cushion Clamps Dimensions /8" 7/8" " øa C Description Cushion clamps are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. Features Distortion free clamping Shock and vibration reduction Elimination of rotation Retrofit without disassembly Easy installation Control squeeze shoulder bolt prevents over tightening of the clamp assembly, preventing the possibility of crushing the tube. Fits standard /8 wide mounting rail Materials Clamp carbon steel (with electrodichromate finish) Cushion thermoplastic elastomer Cushion material withstands the effect of most oils, chemicals and industrial cleaning solvents at temperatures 0 to 7 F. Mounting Rail Part Number: 007 : Cush Rail x Galvanized Material: Low gauge carbon steel Finish: Galvanized Length: Copper & Steel Tubing in. Application Copper Water Pipe (nom.) in. Tube Series: T = with Controlled Squeeze Shoulder Bolt (sizes /8 and smaller) Pipe Series: P = without Controlled Squeeze Bolt Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available B Dimensions Nom. Pipe in. ø A in. B in. C in. Part No. CUSH /T / CUSH /8T /8 / CUSH /T / / CUSH /P / CUSH /8T /8 / CUSH /8P / CUSH /T / / CUSH /P / CUSH 7/8T 7/8 / CUSH T CUSH /P / CUSH /8T / CUSH /T / CUSH P..7.` 007 CUSH /8T /8 / CUSH /T / CUSH /8T /8 / CUSH /P / CUSH /T / CUSH 7/8T 7/ CUSH /P / CUSH T CUSH /8T / CUSH /8T / CUSH P CUSH /8T / CUSH /P / CUSH /8T / CUSH P CUSH P CUSH P CUSH P INNOVATIVE FLUID POWER

22 Standard Clamps Dimensions Materials B /8" 7/8" øa /" Clamp Stainless steel 0 Cushion thermoplastic elastomer Mounting Rail : Cush Rail / x 0 A Part Number: Material: Stainless steel 0 Length: 0 0 C Part No. A B C CUSH /T A / CUSH /8T A / CUSH /T A / CUSH /8T A / CUSH /T A / CUSH 7/8T A / CUSH T A CUSH /8T A / CUSH /T A /..70. CUSH /8T A / CUSH /T A / CUSH /8T A / CUSH /T A / CUSH 7/8T A / CUSH T A CUSH /8T A /8..7. CUSH /T A / CUSH /8T A / CUSH /T A / CUSH /8T A / CUSH 7/8T A / CUSH T A CUSH /8T A /8..7. CUSH /T A /..9.7 CUSH /T A / CUSH /8T A /8..0. CUSH T A CUSH /8T A /8..7. CUSH /T A / CUSH /8T A /8..7. CUSH T A CUSH /8T A / CUSH /P A / CUSH /8P A / CUSH /P A / CUSH /P A / CUSH P A CUSH /P A /..7.7 CUSH /P A / CUSH P A CUSH /P A / CUSH P A CUSH /P A /.00.. CUSH P A CUSH P A CUSH P A Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs./(kg.) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 9

23 Standard Clamps HRBGS Series Buegu Clamps Dimensions : 0A & 0B slotted 0.0" mm ØD H H Description Buegu clamps are ideal for mobile applications where space is limited. They absorb shock and vibration, and reduce noise. Features Low Profile Design Shock and vibration reduction Easy installation Materials Stirrup & Weld Plate carbon steel Clamp Body thermoplastic elastomer (Santoprene TPE 7) 0.0" mm : and ØD 0." 9mm A A ØD slotted H H 0.0" mm Temp Specifications 0 to 7 F (0 to C) A A 0.0" mm 0.780" 0mm ) Consult Factory for sizes and with different bore diameters Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg.) 9 Clamp 0A 0B Bore Diameter Tube Pipe Clamp Assembly Dimensions ød ød Part No. in mm in mm A A H H / 0.0. HRBGS 0A A. STM 008 mm 0 / HRBGS 0A A 9. STM 009 / HRBGS 0A A 0.0 STM 000 / HRBGS 0B A.7 STM 00 / HRBGS 0B A.7 STM 00 / HRBGS 0B A.0 STM 00 / HRBGS 0B A 7. STM 00 / HRBGS 0B A 9.0 STM 00 / HRBGS A.. STM 00 / HRBGS A 9.9. STM 007 / HRBGS A 00 STM 008 / HRBGS A.7.7 STM 009 / HRBGS A STM 000 / HRBGS A 7.7. STM 00 s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER in mm in mm in mm 9 7 / HRBGS A 99 STM 00 in Hex Head Bolt M x

24 Standard Clamps Buegu Clamp Parts Hex Head Bolt for use with Weld Plate s Part Number 0A, 0B,, SCREW H Mx8.8 DIN BUE = Stirrup s Part Number Hex Head Bolt 0A HRBGS 0A BUE ST ZN 000 0B HRBGS 0B BUE ST ZN 0007 HRBGS BUE ST ZN 00 HRBGS BUE ST ZN 0009 BUE = Stirrup, 0 GT = Rubber Body HUE= Sleeve Clamp 0A 0B Bore Diameter ød ød GT = Clamp Body in mm in mm Part No HRBGS 0A GT HRBGS 0A GT HRBGS 0A GT HRBGS 0B GT HRBGS 0B GT HRBGS 0B GT HRBGS 0B GT HRBGS 0B GT HRBGS GT HRBGS GT HRBGS GT HRBGS GT HRBGS GT HRBGS GT HRBGS GT ) Consult Factory for sizes and with different bore diameters. HUE = Sleeve for use with Weld Plate s Part Number 0A HRBGS 0A/ HUE. ZN 008 0B HRBGS 0B/ HUE. ZN 009 HRBGS 0A/ HUE. ZN 008 HRBGS 0B/ HUE. ZN 009 HUE = Sleeve for use without Weld Plate 0A HRBGS 0A/ HUE 8 ZN 000 0B HRBGS 0B/ HUE ZN 00 HRBGS 0A/ HUE 8 ZN 000 HRBGS 0B/ HUE ZN 00 AP = Weld Plate AP = Weld Plate s Part Number 0A HRBGS 0A AP ST M BL VS B HRBGS 0B AP ST M BL VS HRBGS AP ST M BL VS HRBGS AP ST M BL VS 0789 Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg.) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 9

25 Standard Clamps HRRBS Series Ubolt Clamps Dimensions Pipe ø H A B H H Description Ubolt clamps are a simple solution for securing pipes and other cylindrical objects. The clamps consist of a threaded U and a contoured saddle. Features Metric Threads Easy installation Materials Threaded U zincplated carbon steel Saddle polypropylene D E L B Part No. Pipe or Tube Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available UBolt Pipe support long version A B D E H H H L B Pipe Ø HRRBS L. PP ST ZN / Pipe 0 M HRRBS L.9 PP ST ZN 000 / Pipe 0 0 M HRRBS L.7 PP ST ZN 00 Pipe 8 0 M HRRBS L. PP ST ZN 00 0 M HRRBS L 8. PP ST ZN 00 / Pipe 0 M HRRBS L 0. PP ST ZN 00 Pipe 0 M HRRBS 7 L 7. PP ST ZN 00 Tube 8 0 M HRRBS 8 L 88.9 PP ST ZN 00 Pipe 9 0 M HRRBS 9 L 08 PP ST ZN M HRRBS 9 L. PP ST ZN 008 Pipe / / Tube 0 80 M HRRBS 0 L 9.7 PP ST ZN 009 Pipe 8 80 M HRRBS L 9 PP ST ZN M HRRBS L 8. PP ST ZN 00 Pipe 7 80 M HRRBS L 9. PP ST ZN 00 8 Pipe 8 00 M HRRBS L 7 PP ST ZN 00 0 Pipe 8 00 M HRRBS 7 L 0. PP ST ZN 0088 Pipe 8 00 M INNOVATIVE FLUID POWER

26 Standard Clamps HUB Series Dimensions B A E B Description Designed for the tough jobs, the HUB Series secures pipe runs to any flat surface. The UBolt traps and secures the cushion in place to prevent lateral movement, while nylon insert locknuts provide a positive lock. Features The cushion design provides total load distribution, allowing the UBolt to become a full contact hanger, eliminating knifeedge loading. Extremely cost effective, especially in larger sizes. Materials UBolt Steel with electrogalvanized finish or stainless steel* Cushion Thermoplastic elastomer, rated from 0 to 7 F * The A in the model code denotes stainless steel G Part Number HUB /P HUB /P A HUB /P HUB /P A HUB P HUB P A Pipe C ø A B radius C D E F G H / / / / / F /0 UNCB /0 UNCB /0 UNCB HUB /P / /8 /8 UNCB HUB /P A HUB /P / /8 /8 UNCB HUB /P A HUB P HUB P A /8 /8 UNCB HUB /P / / / UNCB HUB /P A HUB P HUB P A / / UNCB HUB /P / / / UNCB HUB /P A HUB P HUB P A HUB P HUB P A HUB P HUB P A HUB 8P HUB 8P A HUB 0P HUB 0P A HUB P HUB P A / / / / / / / UNCB / UNCB /8 UNCB /8 UNCB /0 UNCB /0 UNCB Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 9

27 Standard Clamps HROS Series Oval Clamps Dimensions 0 A B ød Description Oval clamps are ideal for mobile applications where space is limited. Onepiece, hinged polypropylene clamp body. Features Low Profile Design Easy installation Materials PP Polypropylene (standard) PA or others may be available Temp Specifications to 9 F (0 to 90 C) ød ø. A A ø. A ød. H *D and D may be different bore sizes. Dimensions listed are standard. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/(mm) and lbs/(kg) 97 Part No. HROS 0a KP.0 PP 0077 Tube s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER Pipe HROS 0a KP. PP A / HROS 0a KP 8 PP 00 / HROS 0b KP 8 PP / HROS 0b KP 9. PP B /8 HROS 0b KP.7 PP 0079 / HROS 0c KP 0 PP /8 HROS 0c KP.7 PP C / HROS 0c KP PP 0080 /8 HROS 0d KP PP HROS 0d KP PP /8 /8 0D HROS 0d KP 9 PP / / HROS 0d KP. PP 0087 HROS KP PP 008 HROS KP.. PP 0080 / HROS KP 8 8 PP 0089 / HROS KP 8 8 PP 008 / HROS KP PP 0087 /8 HROS KP.7.7 PP 008 / HROS KP 0 0 PP 0080 /8 HROS KP.7.7 PP 008 / HROS KP PP 0087 /8 HROS KP PP HROS KP PP 0087 /8 /8 HROS KP 9 9 PP 0087 / / HROS KP.. PP A A B N/A 0. N/A 0. N/A 8 8. N/A ød* & ød* ød* & ød* H to 8. 8 to to. to. 0. to 8. 8 to to. to. 0.

28 Standard Clamps HSPN Series Dimensions 0. (.0mm) D E Description 0. (.mm) 0.0 (0.8mm) 0. (.0mm) 0. (.mm) 0. (.7mm) ø0. (ø.mm) P style clamp used for mounting a multitude of light duty applications including cables, pnuematic lines, and conduit. Features HSPN clamps provide electrical insulation and vibration absorbtion. Materials EPDM cushion Steel clamps are zinc electroplated for corrosion resistance Color Silver with black EPDM cushion The A in the model code denotes 0 stainless steel Part No. Holding Dia. D E HSPN / (.8) /8 (9.) HSPN HSPN A / (.) / (0.) HSPN HSPN A / (7.9) 7/ (.) HSPN HSPN A /8 (9.) / (.9) HSPN HSPN7 A / (.) / (.7) HSPN HSPN8 A / (.7) 7/ (.) HSPN HSPN9 A / (.0) 9/ (.) HSPN HSPN0 A /8 (.9) 9/ (.) HSPN / (7.) /8 (.9) HSPN HSPN A / (9.) / (9.) HSPN HSPN A /8 (.) / (0.) HSPN HSPN A (.) 7/8 (.) HSPN HSPN8 A /8 (8.) / (.8) HSPN HSPN0 A / (.8) (.) HSPN /8 (.9) / (9.) HSPN HSPN A / (8.) 7/ (0.9) HSPN /8 (.) 9/ (.) HSPN HSPN8 A / (.) / (.) HSPN /8 (7.) / (.7) HSPN HSPN A (0.8) / (7.) HSPN /8 (.0) 7/ (8.8) HSPN / (.) / (.) HSPN (7.) / (0.) s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 98

29 Standard Clamps HRGKSM Series Quick Release Swivel Bolt Clamps Dimensions (continued on next page) Swivel Point M T Clamping width Xthickness C H Rotates 70 D Easy Access to Bolts Polyethylene Profile A S Support Base Description E D The HRGKS is a clamp designed to mount cylindrical components. It is similar to the HYDAC HYRAC clamp, which is designed for accumulators, with some additional benefits that make it more practical for nonaccumulator applications. L B Features / Benefits Swivel Assembly Provides for simple installation and a tight fit Support Base Provides easy access to bolts / unit easy to install The clamp rotates ~70 / Easy access Polyethylene profile does not compress Clamp stays tight over time Materials Description Support Base Polyethylene Profile Quick Release Swivel Bolt Band Strap Material / Coating Zinc Plated Steel Polyethylene ZincPlated Steel Stainless Steel HRGKSM vs. HYRAC* Difference HRGKSM HYRAC Profile Material Polyethylene Rubber Capability to Rotate Can be rotated 70 Fixed at 90 deg Fit in clamp Component sits flat Two nubs ensure H dimension is consistent with other HYDAC Accumulator Clamps *HYRAC clamp sizes 900 and under have the same construction as the HRGKSM Series For more detailed information on the HYRAC Clamps please refer to the HYDAC Accumulator Catalog 99 INNOVATIVE FLUID POWER

30 Standard Clamps Part No. C Max D* M T A S L B E d Wt. HRGKSM 0 R 0/ ST HRGKSM 0 R /7 ST HRGKSM 0 R 70/0 ST HRGKSM 0 R / ST HRGKSM 0 R 8/9 ST HRGKSM 0 R 8/ ST HRGKSM 0 R / ST HRGKSM 0 R 9/9 ST M X 0 0x HRGKSM 0 R 707/7 ST HRGKSM 0 R 77/7 ST HRGKSM 0 R 7780/80 ST HRGKSM 0 R 88/8 ST HRGKSM 0 R 888/89 ST HRGKSM 0 R 899/9 ST HRGKSM 0 R 99/9 ST HRGKSM 0 R 900/00 ST HRGKSM R 009/0 ST HRGKSM R 08/ ST HRGKSM R 97/ ST HRGKSM R 8/ ST HRGKSM R 7/ ST M 8 X 80 x HRGKSM R / ST HRGKSM R 08/ ST HRGKSM R /0 ST HRGKSM R 7/9 ST HRGKSM R 7/9 ST HRGKSM R 77/7 ST HRGKSM R 780/78 ST HRGKSM R 89/87 ST HRGKSM R 89/9 ST M 8 X 80 x HRGKSM R 9907/0 ST HRGKSM R 08/ ST HRGKSM R 7/ ST HRGKSM R / ST HRGKSM R / ST HRGKSM R 89/ ST HRGKSM R 7/9 ST HRGKSM R 879/7 ST HRGKSM R 78/8 ST M 0 X 90 0x HRGKSM R 8798/9 ST HRGKSM R 90/0 ST HRGKSM R 00/08 ST HRGKSM R / ST HRGKSM R 7/ ST HRGKSM R 90/7 ST HRGKSM R / ST HRGKSM R /0ST HRGKSM R 7889/8 ST HRGKSM R 90/99 ST M 0 X 90 0x HRGKSM R 0 ST HRGKSM R 78/ ST HRGKSM R 0/8 ST HRGKSM R ST *Diameter range is noted in the model code. Example: HRGKSM 0 R 0/ ST. Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in millimeters and kilograms. s containing selections listed in RED italics are nonstandard items Minimum quantities will apply Contact HYDAC for information and availability Not all combinations are available INNOVATIVE FLUID POWER 00

31 Custom Clamps HRRL & HRRLE Series Series Strip Clamps Description For OEM s requiring solutions for multiple line runs HYDAC offers customized Weld series Plate strips. Mounting These clamps CRail reduce Mounting inventory and installation time, while providing a more compact solution than multiple DIN 0 clamps. The design and dimensions are based on the DIN 0 specifications set forth for single and twin clamps. The Series Strip Program, echoes that of the DIN 0 Clamps in that it offers similar arrangements, sizes, options, and model coding. Arrangements HRRL Series: Standard Duty Arrangements HRRLE Series: Heavy Duty with Rubber Inserts Stacking Weld Plate Mounting CRail Mounting Weld Plate Mounting CRail Mounting Stacking Number of Lines & Bolts HRRL Series: Standard Duty (diameter range: to. mm) Lines / Bolts (HRRL... X.../...) Number of Lines & Bolts HRRLE Series: Heavy Duty with Rubber Inserts (diameter range: to. mm) Lines / Bolt (HRRLE... Lines X.../...) / Bolt (HRRLE... X.../...) Stacking Check out my Sizing Program at Lines / Bolts (HRRL... X.../...) Lines / Bolts (HRRLE... Lines X.../...) / Bolts (HRRLE... X.../...) Weld Plate Mounting Lines / Bolts (HRRL... CRail X.../...) Mounting Lines / Bolts (HRRLE... Lines X.../...) / Bolts (HRRLE... X.../...) Lines / Bolts (HRRL... X.../...) Lines / Bolts (HRRLE... Lines X.../...) / Bolts (HRRLE... X.../...) Stacking Lines / Bolts (HRRL... X.../...) Lines / Bolts (HRRLE... Lines X.../...) / Bolts (HRRLE... X.../...) 0 Lines / Bolts (HRRL...0 X.../...) Lines / Bolts (HRRLE... Lines X.../...) / Bolts (HRRLE... X.../...) Series Strip Program Now ordering a Series Strip Clamp has become easier than ever before. Click on and try out our new Series Strip Sizing Program. When you are finished you will have a model code, drawings and everything you need to place your order. Ordering Series Strip Clamps are a custom product which must be quoted on an individual project basis. As with DIN 0 Clamps, the Series Strip Clamps can be ordered as complete arrangements or as individual components. Series Strip Clamps are available with differing bore sizes. Contact HYDAC at.877.go.hydac with your specifications to request a quotation. 0 INNOVATIVE FLUID POWER

32 Custom Clamps Band Straps Description For OEM s requiring mounting solutions to secure noncylindrical objects such as plastic fuel tanks, HYDAC offers steel band straps. Item Description/Material Clamping Band, Stainless Steel Metric ZincPlated Steel Socket Head Bolts (Note: other bolt and connection styles are available based on customer s specifications) Nuts, Zinc Plated Steel Swivel Sleeve, Zinc Plated Steel Rubber Profile Width Thickness Length Dimensions Width x Thickness Length Range (L) Light Range x 87 9 mm Heavy Range 0 X mm Heavy II Range 0 X. mm Ordering ± h = 8 to 0 H = D/+h Band Straps are a custom product which must be quoted on an individual project basis. Band Straps are available with various lengths, widths, connecting hardware, and with or without rubber profiles. Contact HYDAC at 877GO HYDAC with your specifications to request a quotation. L Diameter Range INNOVATIVE FLUID POWER 0