PLUMMING AND SANITATION

Transcription

1 Pumps, Tubings, Compression fittings and Drainages 9 PLUMMING AND SANITATION Pumps, Tubings, Compression fittings and Drainages Submersible pumps Industrial and Construction supplies Submersible Pump TAE AL-KO For clean water. Effective protection against corrosion and oxidation fibreglass-reinforced polypropylene. TAE300 TAE500 Engine 230V/50Hz 230V/50Hz Output 300W 500W With float switch Yes Yes Maximum height of transport 5,9 m 7,9 m Maximum capacity 7500 l/h l/h Maximum submersion depth 5 m 5 m Remaining water level 3 mm 8 mm Particles/maximum 2-3 mm 8 mm Max. temperature 35 C 35 C Lift-pressure connection diam. 1 1/4" 1 1/4" Art.no. Model Width Depth Height Weight Unit Pack TAE mm 160 mm 295 mm 5,1 kg PCS TAE mm 160 mm 310 mm 5,1 kg PCS 1 Submersible pump SUB 6000/8001/15001 AL-KO For clean and wastewater. Submersible pump for draining in water removal, as well as for circulating water and pumping out cellars, swimming pools and ponds. SUB6000 SUB8001 SUB15001 Engine 230V/50Hz 230V/50Hz 230V/50Hz Output 250W 350W 550W With float switch Yes, external Yes, external Yes, external Maximum height of transport 6 m 7 m 9,5 m Maximum capacity 6500 l/h 8000 l/h l/h Maximum submersion depth 5 m 7 m 7 m Remaining water level 10 mm 10 mm 10 mm Particles/maximum 2-3 mm 2-3 mm 2-3 mm Max. temperature 35 C 35 C 35 C Lift-pressure connection diam. 1 1/4" 1 1/4" 1 1/4" Art.no. Model Width Depth Height Weight Unit Pack SUB mm 282 mm 4,6 kg PCS SUB mm 142 mm 282 mm 5,0 kg PCS SUB mm 202 mm 282 mm 5,1 kg PCS 1 SUB

2 9 Pumps, Tubings, Compression fittings and Drainages Submersible pump BVP AL-KO For contaminated water, displaces suspended debris particles up to 38 mm. The pump offer high capacity. With a reinforced pump wheel. Solid seals on a ceramic coated motor shaft. With adjustable guard. For demanding tasks. Engine 230V/50Hz Output 1000W With float switch Yes Maximum height of transport 11 m Maximum capacity l/h Maximum submersion depth 7 m Remaining water level 50 mm Particles/maximum 38 mm Max. temperature 35 C Lift-pressure connection diam. 1 1/2" Art.no. Model Diam. Height Weight Unit Pack BVP mm 400 mm 8,2 kg PCS 1 Submersible pump SPV15000 AL-KO Non-corrosive wastewater submersible pump with high flow rate for a variety of implementations. For particulate size up to 35 mm. Made in stainless steel and effective protection against corrosion and oxidation fibreglass-reinforced polypropylene. For demanding tasks. Engine 230V/50Hz Output 550W With float switch Yes, external Maximum height of transport 11 m Maximum capacity 15000l/h Maximum submersion depth 7 m Remaining water level 40 mm Particles/maximum 35 mm Max. temperature 50 C Lift-pressure connection diam. 1 1/4" Art.no. Model Depth Width Height Weight Unit Pack SPV mm 169 mm 379 mm 8 kg PCS 1 Twin Drain 8001 Submersible pump Twin 10000/14000 Combi AL-KO Used for suction tasks and for clean and wastewater. For demanding tasks. Twin Twin Engine 230V/50Hz 230V/50Hz Output 750W 950W With float switch Yes, external Yes, external Maximum height of transport 7,5 m 9 m Maximum capacity l/h l/h Max. submersion depth 7 m 7 m Remaining water level 60 mm manual operation 60 mm manual operation Particles/maximum 30 mm 30 mm Max. temperature 35 C 35 C Lift-pressure connection diam. 1 1/4" 1 1/4" Art.no. Model Width Depth Height Weight Unit Pack Twin Combi 182 mm 330 mm 360 mm 7 kg PCS Twin Combi 182 mm 330 mm 360 mm 7,5 kg PCS 1 Submersible pump Drain 6001/8001/11001 AL-KO Used for suction tasks and for pumping out wastewater from foundations, flooded cellars. For demanding tasks. DRAIN6001 DRAIN8001 DRAIN11001 Engine 230V/50Hz 230V/50Hz 230V/50Hz Output 400W 550W 850W With float switch Yes, external Yes, external Yes, external Maximum height of transport 5,0 m 8,5 m 9,5 m Maximum capacity 7500 l/h l/h l/h Maximum submersion depth 5 m 7 m 7 m Remaining water level 40 m 40 mm 40 mm Particles/maximum 30 mm 35 mm 35 mm Max. temperature 35 C 35 C 35 C Lift-pressure connection diam. 1 1/4" 1 1/4" 1 1/4" Art.no. Model Width Depth Height Weight Unit Pack DRAIN mm 204 mm 306 mm 4,9 kg PCS DRAIN mm 212 mm 306 mm 5,2 kg PCS DRAIN mm 204 mm 332 mm 6,7 kg PCS 1 716

3 Pumps, Tubings, Compression fittings and Drainages Submersible pump 6000 SL GARDENA Practical, robust submersible pump for draining, drawing off water, and pumping water from and between containers. For clean to slightly contaminated water containing particles up to 5 mm. With float switch. Pumps out water down to 5 mm. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 220 W Maximum capacity 6000 l/h Max. pressure 5 m/0,5 bar Max. submersion depth 9 m Max. temperature 35 C Weight 3,8 kg Connection cable 10 m H05 RNF Art.no. Orig. num. Description Unit Pack Submersible pump 6000 SL PCS 1 Submersible pump aqua sensor GARDENA Practical, robust submersible pump for draining, drawing off water, and pumping water from and between containers. For clean to slightly contaminated water, minimum water level 5 mm. With aqua sensor: automatic start from minimum water level 5 mm. With adjustable float switch for automatic start/stop. Pump impeller: low wear for long life. Thermal overload switch, prevents the motor being overloaded. Universal connection 13 mm, 16 mm, 19 mm, 25 mm. Thread 41,9 mm (G 1 1/4). 10 m cable. Can also be used in swimmingpools and ponds. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 650 W Maximum capacity l/h Max. pressure 8 m/0,8 bar Max. submersion depth 8 m Flat suction depth 1 mm Max. temperature 35 C Weight 5,4 kg Connection cable 10 m H05 RNF Art.no. Orig. num. Description Unit Pack Submersible pump aqua sensor PCS 1 Rainwater tank pump 6000 SP GARDENA Practical, robust submersible pump for draining, drawing off water, and pumping water from and between containers. For clean to slightly contaminated water containing particles up to 25 mm in diameter. Pumps out water down to 30 mm. With float switch for automatic start/stop. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 220 W Maximum capacity 6000 l/h Max. pressure 5 m/0,5 bar Max. submersion depth 9 m Max. temperature 35 C Weight 3,8 kg Connection cable 10 m H05 RNF Particles/maximum 25 mm Art.no. Orig. num. Description Unit Pack Rainwater Tank Pump 6000 SP PCS 1 Rainwater tank pump aqua sensor GARDENA Multifaceted, robust submersible pump for draining and pumping water from and between containers. For contaminated water, maximum particles up to 38 mm. With aqua sensor: automatic start from minimum water level 65 mm. With adjustable float switch for automatic start/stop. Pump impeller: low wear for long life. Thermal overload switch, prevents the motor being overloaded. Universal connection 13 mm, 16 mm, 19 mm, 25 mm. Thread 41,9 mm (G 1 1/4). 10 m cable. Can also be used in swimmingpools and ponds. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 380 W Maximum capacity 8300 l/h Max. pressure 6 m/0,6 bar Max. submersion depth 8 m Max. temperature 35 C Weight 4,0 kg Connection cable 10 m H05 RNF Particles/maximum 30 mm Art.no. Orig. num. Description Unit Pack Rainwater tank pump 8500 aqua sensor PCS

4 9 Pumps, Tubings, Compression fittings and Drainages TDS 1001 Submersible pressure pumps Submersible pressure pump TDS 1001/1201 AL-KO For clean water. The pump has effective protection against corrosion and oxidation fibreglass-reinforced polypropylene. Combine the advantage of garden pumps and submersible pumps in one device. For watering from wells and cisterns, the pump reliably ensure the necessary pressure for operation of lawn sprinklers and complex watering systems, and even the automatic domestic water supply in conjunction with a Hydro control unit. TDS 1001 TDS 1201 Engine 230V/50Hz 230V/50Hz Output 1000W 1200W With float switch Yes, external Yes, external Maximum height of transport 34/3,4 bar 44 m/4,4 bar Impeller 3-stage 4-stage Maximum capacity 6000 l/h 6300 l/h Max. submersion depth 10 m 10 m Particles/maximum 1 mm 1 mm Max. temperature 35 C 35 C Lift-pressure connection diam. 1" 1" Art.no. Model Width Depth Height Weight Unit Pack TDS mm 148 mm 485 mm 8,8 kg PCS TDS mm 143 mm 502 mm 9,1 kg PCS 1 Jet 601 JET 601 Inox Submersible pressure pump JET 601 AL-KO Pumps for clean and wastewater. For watering and sprinkling. 601: With fibre-glass reinforced pump housing. 601 Inox: with non-corrosive Inox stainless steel pump head. Ideal pumps for watering with powerful motors that are protected from overload. JET 601/JET 601 Inox Engine 230V/50Hz Output 600W Dry-running protection control No Maximum height of transport 35 m/3,5 bar Impeller 1-stage Maximum capacity 3100 l/h Max. submersion depth 9 m Max. temperature 35 C Lift-pressure connection diam. 1" Art.no. Model Width Depth Height Weight Unit Pack JET mm 352 mm 187 mm 6.5 kg PCS JET 601 Inox 193 mm 352 mm 181 mm 6,3 kg PCS 1 Submersible pressure pump set 3000/3 Jet GARDENA The pump is lightweight and robust, and versatile in use: for watering, for increasing pressure, for pumping rainwater and chlorinated swimming pool water. High reliability due to double seal system between motor and pump mechanism. Automatic protection of the maintenance-free capacitor motor from overload by thermal cut-out. Salt water, aggressive and easily combustible substances as well as food must not be pumped. With 20 m 1/2" hose, connectors and 3,5 m suction hose. Output 600W Maximum capacity 3000 l/h Max. pressure 32 m/3,2 bar Max. submersion depth 7 m Weight 6,1 kg Connection cable H07 RNF 1.5 m Art.no. Orig. num. Description Unit Pack Submersible pressure pump set 3000/3 Jet PCS 1 Submersible pressure pump 4000/5 Jet GARDENA Versatile in use: for watering, for increasing pressure, for pumping rainwater and chlorinated swimming pool water. Big refill opening. High reliability due to double seal system between motor and pump mechanism. Automatic protection of the maintenance-free capacitor motor from overload by thermal cut-out. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 1000W Maximum capacity 4000 l/h Max. pressure 49 m/4,9 bar Max. submersion depth 9 m Weight 10,3 kg Connection cable H07 RNF 1.5 m Art.no. Orig. num. Description Unit Pack Submersible pressure pump 4000/5 Jet PCS 1 718

5 Pumps, Tubings, Compression fittings and Drainages Submersible pressure pump 3000/3 Jet GARDENA The pump is lightweight and robust, and versatile in use: for watering, for increasing pressure, for pumping rainwater and chlorinated swimming pool water. High reliability due to double seal system between motor and pump mechanism. Automatic protection of the maintenance-free capacitor motor from overload by thermal cut-out. Salt water, aggressive and easily combustible substances as well as food must not be pumped. Output 600W Maximum capacity 3000 l/h Max. pressure 32 m/3,2 bar Max. submersion depth 7 m Weight 6,1 kg Connection cable H07 RNF 1.5 m Art.no. Orig. num. Description Unit Pack Submersible pressure pump 3000/3 Jet PCS 1 Domestic water supply systems Automatic domestic pump systems GPI 900 AL-KO Suitable for drinking water, watering plants. The hydro control automatically detects leaky pressure lines. Dry-running protection control through integrated transducer. Supplied complete with cable and plug, 90 angle connection, swivel 360 for 1" hose/thread. Engine 230V/50Hz Output 900W Dry-running protection control Yes Maximum height of transport 35 m/3,5 bar Impeller 3-stage Maximum capacity 5100 l/h Max. submersion depth 8 m Maximum height of transport 35 C Lift-pressure connection diam. 1" Art.no. Model Width Depth Height Weight Unit Pack GPI mm 260 mm 310 mm 11 kg PCS 1 Automatic domestic pump 4000/4 LCD GARDENA Automatic water supply: for all types of watering with garden sprinklers and irrigation systems using stored water and for increasing water pressure. Electronic manometric switch automatically switches the pump on if water is required and then off again. Maintenance-free capacitor motor with thermal overload switch. Electronic control with function and fault indicators. Output 800W Maximum capacity 3600 l/h Max. height 44 m Max. pressure 4,4 bar Start pressure 2,0 bar Max. submersion depth 9 m Max. temperature 35 C Weight 10,5 kg Connection cable H07 RNF 1.5 m Art.no. Orig. num. Description Unit Pack Automatic domestic pump 4000/4 LCD PCS

6 9 Pumps, Tubings, Compression fittings and Drainages HW 601 HW 601 Inox Automatic water supply Automatic water supply HW 601 AL-KO Powerful, quiet and reliable pump in continuous operation with a constant pressure. Can also be used for an extra increase in pressure in existing water supply. Maintenance-free. Protection from overload for long lifetime and reliable operations. HW 601: Protection against corrosion and oxidation in polypropylene. HW 601 Inox: Additionally fitted with a non-corrosive stainless steel pump head. HW 601/HW 601 Inox Engine 230V/50Hz Output 600W Dry-running protection control No Maximum height of transport 35 m/3,5 bar Impeller 1-stage Maximum capacity 3100 l/h Max. submersion depth 9 m Pump wheel 1 pc Max. temperature 35 C Engagement/Disengagement 1,5 bar/2,8 bar Volume pressure tank 20 litre Lift-pressure connection diam. 1" Art.no. Model Width Depth Height Weight Unit Pack HW mm 300 mm 555 mm 12 kg PCS HW 601 Inox 430 mm 270 mm 555 mm 12 kg PCS 1 Automatic water supply HW 802 AL-KO Automatic water supply for house and garden. Maintenance-free. With adjustable guard. Complete with pressure gauge. With effective protection against corrosion and oxidation fibreglass-reinforced polypropylene. For long lifetime and the tank in steel. Accessories: Suction hose, pre-filter and Electronic hydro control with integrated Dry-running protection control. Engine 230V/50Hz Output 700W Dry-running protection control No Maximum height of transport 38 m/3,8bar Impeller 1-stage Maximum capacity 3400 l/h Max. submersion depth 9 m Max. temperature 35 C Engagement/Disengagement 2,0 bar/3,5 bar Volume pressure tank 20 litre Lift-pressure connection diam. 1" Art.no. Model Width Depth Height Weight Unit Pack HW mm 380 mm 460 mm 11,8 kg PCS 1 Automatic water supply GARDENA Automatic water supply: For all types of watering in house and garden. All necessary accessories are available. The pump is lightweight and robust, and versatile in use: for watering, for increasing pressure, for pumping rainwater and chlorinated swimming pool water. Salt water, aggressive and easily combustible substances as well as food must not be pumped. 3000/4 5000/5 Output 650W 1100 W Maximum capacity 2800 l/h 4500 l/h Max. height 40 m 50 m Max. pressure 4,0 bar 5,0 bar Start pressure 1,5 bar 2,0 bar Max. submersion depth 8 m 8 m Max. temperature 35 C 35 C Weight 12,8 kg 15,5 kg Connection cable H07 RNF 1.5 m 1.5 m Art.no. Orig. num. Description Unit Pack Automatic water supply 3000/4 PCS Automatic water supply 5000/5 PCS 1 Pump accessories Non-return valve AL-KO Flow mounting with O-ring and gasket. 1 internal thread. Indispensable for all surface suctioning pumps and hydrophore pumps intended for self suctioning and automatic work. Art.no. Description Unit Pack Non-return valve 1" PCS 1 720

7 Pumps, Tubings, Compression fittings and Drainages Pre-filter AL-KO Pre-filter: Type 100/1" for garden pumps, protects pump from suspended substances. With two 1 /1 thread adapters and one 1 /3/4 thread adapter. Type 250/1" for all domestic water pumps. Includes two 1 /1 thread adapters and one 1 /3/4 thread adapter and washable plastic filter insert. Filter insert: Plastic, washable, 60 microns, for sand and solids. Art.no. Description Unit Pack Pre-filter 100/1" PCS Pre-filter 250/1" PCS Filter insert for 100/1" PCS Filter insert for 250/1" PCS 1 PVC-hose AL-KO Hose for pumps, length 6 metres. Art.no. Description Length Unit Pack PVC-hose 1 1/2" 6 m PCS PVC-hose 1 1/4" 6 m PCS PVC-hose 1" 6 m PCS 1 PVC-hose AL-KO Complete with filter basket, check valve, fittings and 1 threaded adapter. Art.no. Description Length Unit Pack Suction hose 3/4" 4 m PCS Suction hose 1" 7 m PCS 1 Suction hose with non-return valve Vacuum-resistant spiral hose. Ready for connection. With suction filter and backflow preventer. 3,5 or 7 m. For pumps with 33.3 mm (G 1) male thread. Art.no. Orig. num. Description Length Diam. Unit Pack Suction hose with Non-return valve 3,5 m 25 mm 1" PCS Suction hose with Non-return valve 7,0 m 25 mm 1" PCS 1 9 Electric drill pump GARDENA Small, handy, fits any electric drill. Max. capacity with 1/2" hose 1700 l/h with 3/4" hose 2400 l/h. Art.no. Orig. num. Description Unit Pack Electric drill pump PCS 5* Bottom valves Bottom valve brass 2905 Prevents return flow of water in piping. Brass. Art.no. Description Int. thread Unit Pack Bottom valve 20 DIY G3/4 PCS 5* Bottom valve 25 DIY G1 PCS 5* Bottom valve 32 DIY G1 1/4 PCS 5* Bottom valve 40 DIY G1 1/2 PCS 5* Pipes Pex tubing 5816 Approved for drinking water. Pex has many advantages, no ferrous (metal/iron) components, no rust and low friction. The low friction means low pressure drops and that no deposits reduce the inner diameter. May easily be connected with Kuterlite compression fittings for external 15 mm tube. Incl. 5 pcs copper liner 12x1,0. Art.no. Description Length Outer diameter Unit Pack Pex tube 5 m 15 mm PCS 1 Copper tube Annealed. Art.no. Description Length Diam. Thickness Unit Pack Copper tube Chromed 1200 mm 10 mm 0,8 mm PCS 25* Copper tube Chromed 1200 mm 12 mm 1,0 mm PCS 25* Copper tube Chromed 2000 mm 12 mm 1,0 mm PCS 25* Copper tube Chromed 1200 mm 15 mm 1,0 mm PCS 15* 721

8 9 Pumps, Tubings, Compression fittings and Drainages Prisol copper tube Soft annealed copper tube with a two-layer polyethylene coating. Easy to bend - use suitable bending device for bending more narrow radius. Marked with dimension, meter e.g. Joining by soldering or with a compression fitting with copper liner. Approved according to SITAC num. 1448/87. Art.no. Description Thickness Mantel diam Contents Unit Pack Prisol tube DIY 12x1 mm 17,2 mm 5 m PAC Prisol tube 12x1 mm 17,2 mm Prisol tube DIY 15x1 mm 20,6 mm 5 m PAC Prisol tube 15x1 mm 20,6 mm 25 Connection hoses Connection hose, angle/angle Kombipex 5805 With connection of water for washing and dish washing machines and shower cabins. Manufactured by Wirsbo- inpex(r) made of polyethylene. Angle x angle. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Thread Length Unit Pack Connection hose 5805 G1/2xG1/ mm PCS 1 Connection hose, straight/angle Kombipex 5800 With connection of water for washing and dish washing machines and shower cabins. Made of Wirsbo- inpex(r) crosslinked polyethylene. Straight x angle. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Thread Length Unit Pack Connection hose 5800 G1/2xG1/ mm PCS Connection hose 5800 G1/2xG1/ mm PCS Connection hose 5800 G1/2xG3/ mm PCS Connection hose 5800 G1/2xG1/ mm PCS Connection hose 5800 G1/2xG3/ mm PCS Connection hose 5800 G1/2xG3/ mm PCS Connection hose 5800 G1/2xG3/ mm PCS 1 Connection hose, straight/straight Ajepex 5821 With connection of WC, wash basins, etc. Bendable and easy to mount. Made of Wirsbo-inPex(R) cross-linked polyethylene. Straight x straight. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Thread Length Unit Pack Connection hose 5821 G1/2 300 mm PCS 5* Connection hose 5821 G1/2 500 mm PCS 5* Connection hose 5821 G1/2 700 mm PCS 5* Transfer nipple 5711, 5712 With connection of water for shower cabins. Art.no. Description Thread Contents Unit Pack Transfer nipple 5711 M26xG1/2 2 pcs PAC 5* Transfer nipple 5712 M34xG1/2 2 pcs PAC 5* Angle support 5811 Angle support for Kombipex hose. Art.no. Description Contents Unit Pack Angle support pcs PAC 1 Gasket 5814 Intended for Kombipex hose. Art.no. Description Thread Contents Unit Pack Gasket 5814 DIY G1/2 + G3/4 2 pcs of each PCS 5* Compression fittings 722 Compression fitting Kuterlite 5610 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x tube, with 2 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Unit Pack Compression fitting mm PCS Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5

9 Pumps, Tubings, Compression fittings and Drainages Compression fitting, straight Kuterlite 5611 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x male coupling, with 1 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting R15 mm 10xG1/2 PCS 5* Compression fitting R15 mm 12xG1/2 PCS 5* Compression fitting R15 mm 15xG1/2 PCS 5* Compression fitting R15 mm 16xG1/2 PCS 5* Compression fitting R15 mm 22xG1/2 PCS 5* Compression fitting R15 mm 8xG1/2 PCS 5* Compression fitting R20 mm 15xG3/4 PCS 5 Compression fitting, straight Kuterlite 5612 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x female coupling, with 1 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting R15 mm 10xG1/2 PCS 5* Compression fitting R15 mm 12xG1/2 PCS 5* Compression fitting R15 mm 15xG1/2 PCS 5* Compression fitting, straight Kuterlite 5613 GB ROT A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x tube, with 2 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Unit Pack Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting, elbow Kuterlite 5615 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x tube with 2 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Unit Pack Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5 Compression fitting, elbow Kuterlite 5616 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x male coupling with 1 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting R15 mm 12xG1/2 PCS 5* Compression fitting R15 mm 15xG1/2 PCS 5* Compression fitting, elbow Kuterlite 5617 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x female coupling with 1 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting R15 mm 12xG1/2 PCS 5* Compression fitting R15 mm 15xG1/2 PCS 5* Compression fitting, elbow back plate Kuterlite ASF5617 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x int. thread, with 1 copper liner, reduction set is included. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting ASF R15 mm 15xG1/2 + 12xG1/2 PCS 3* 9 Compression fitting, tee Kuterlite 5618 GB A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Tube x Tube x tube, with 3 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Unit Pack Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 5* Compression fitting mm PCS 3 723

10 9 Pumps, Tubings, Compression fittings and Drainages Compression fitting, tee Kuterlite 5621 GB ROT A range of duplex brass compression fittings for jointing copper tube or Pex tube. Made of hard zinc coated brass. Male thread, with 2 copper liner. Approved according to SWEDCERT num and SITAC num. 5775/88. Art.no. Description Outer diameter Thread Unit Pack Compression fitting R15 mm 10xG1/2 PCS 5* Compression fitting R15 mm 12xG1/2 PCS 5* Compression fitting R15 mm 15xG1/2 PCS 5* Compression fitting R15 mm 16xG1/2 PCS 5* Reduction set Kuterlite 5648 GB With copper liner. Art.no. Description Outer diameter Unit Pack Reduction set mm PCS 5* Reduction set mm PCS 5* Reduction set mm PCS 5* Reduction set mm PCS 5* Reduction set mm PCS 5* Reduction set mm PCS 5* Blanking plug Kuterlite 5672 GB For blanking plugs. Art.no. Description Outer diameter Unit Pack Blanking plug mm PCS 5* Blanking plug mm PCS 5* Blanking plug mm PCS 5* Compression ring Kuterlite 5678 GB Art.no. Description Outer diameter Contents Unit Pack Compression ring mm 5 pcs PAC 5* Compression ring mm 5 pcs PAC 5* Compression ring mm 5 pcs PAC 5* Spare parts, copper liner - Compression ring Kuterlite 5689 GB For soft copper tubes, 2 pcs of each. Art.no. Description Outer diameter Contents Unit Pack Spare parts mm 2 pcs PAC 5* Spare parts mm 2 pcs PAC 5* Spare parts mm 2 pcs PAC 5* Copper liner Kuterlite 5690 GB For soft copper tubes. * Copper liner to Pex-tube. Art.no. Description Outer diameter Contents Unit Pack Copper liner mm 5 pcs PAC 5* Copper liner mm 5 pcs PAC 5* Copper liner mm 5 pcs PAC Copper liner 5690 PEX* 15 mm 5 pcs PAC 5* Half nipples Half nipple yellow Kuterlite 5680 GB Intended for jointing the copper tube for calibrated seamless soft steel pipes and polyethylene tube. Tube x int. thread. Art.no. Description Outer diameter Thread Unit Pack Half nipple R15 mm G1/2xR16 PCS 5* Half nipple, Pipefix Kuterlite 3085 GB Half nipple Pipefix, is intended for jointing the copper tube with valve, unit, etc equipped with male thread. Made of chromed brass. Art.no. Description Outer diameter Thread Unit Pack Half nipple R15 mm 8xG1/2 PCS 5* Half nipple R15 mm 10xG1/2 PCS 5* Half nipple R15 mm 12xG1/2 PCS 5* Half nipple R15 mm 15xG1/2 PCS 5* Half nipple R10 mm 10xG3/8 PCS 5* Half nipple R10 mm 12xG3/8 PCS 5* 724

11 Half nipple FMM With copper liner. For copper tube Ø10x0,8 mm. Chromed nut. Half nipple FMM With copper liner. For copper tube Ø12x1 mm. Chromed nut. Half nipple FMM With copper liner. For copper tube Ø15x1 mm. Chromed nut. Pipe clips Pipe clip, single 5128 GB For plastic isolated and unisolated copper tubes, with screws and plugs as well as sealing. Pumps, Tubings, Compression fittings and Drainages Art.no. Orig. num. Description Thread Unit Pack Half nipple G1/2 PCS 10* Art.no. Orig. num. Description Thread Unit Pack Half nipple G1/2 PCS 10* Art.no. Orig. num. Description Thread Unit Pack Half nipple G1/2 PCS 10* Art.no. Description Diam plastic isolated Diam unisolated Contents Unit Pack Pipe clip mm 15 mm 2 pcs PAC 5* Pipe clip mm 18 mm 2 pcs PAC 5* Pipe clip mm 22 mm 2 pcs PAC 5* Pipe clip 5128F 10 mm 2 pcs PCS 5* Pipe clip 5128F 12 mm 2 pcs PAC 5* Pipe clip, double 5129 GB For plastic isolated and unisolated copper tubes, with screws and plugs as well as sealing. Art.no. Description Diam plastic isolated Diam unisolated Unit Pack Pipe clip mm 15 mm PCS 5* Pipe clip mm 18 mm PCS 5* Pipe clip mm 22 mm PCS 5* Pipe clip Purus Snap-on for tubes dimension 12 and 15 mm - for wet areas, with sealing round the hole. Art.no. Description Dimension RSK num. Contents Unit Pack Pipe clip Purus, single mm White pcs PAC Pipe clip Purus, single mm Chromed pcs PAC Pipe clip Purus, CC mm White pcs PAC Pipe clip Purus, CC mm Chromed pcs PAC 5 Cover plate/protective cover Art.no. Orig. num. Description Dimension Contents Unit Pack GB12 Cover plate/protective cover 12 mm White 4 pcs PAC FGB12 Cover plate/protective cover 12 mm Chrome 2 pcs PAC GB15 Cover plate/protective cover 15 mm White 4 pcs PAC FGB15 Cover plate/protective cover 15 mm Chrome 2 pcs PAC GB22 Cover plate/protective cover 22 mm White 4 pcs PAC 1 Cover plate/protective cover Purus Duo-täck Art.no. Description Dimension RSK num. Contents Unit Pack Cover plate/protective cover Duo-täck cc mm White pcs PAC Cover plate/protective cover Duo-täck cc mm Brown pcs PAC 5 9 Wet room cover plate/protective cover Purus Aqua-tät Art.no. Description Type Dimension RSK num. Contents Unit Pack Cover plate Single White pcs PAC 5* Cover plate Single Chromed pcs PAC 5* Cover plate Double White pcs PAC 5* Cover plate Double Chromed pcs PAC 5* 725

12 9 Pumps, Tubings, Compression fittings and Drainages Valves Non-return valve 1105 Prevents return flow of water in piping. Art.no. Description Outer diameter Thread Unit Pack Non-return valve mm G1/2 PCS 5* Non-return valve mm G3/4 PCS 5* Non-return valve mm G1 PCS 3* Ball valve Ballofix 3053 For shutting of cold and hot water and central heating water. Approved according to Boverket (2192/81). Art.no. Description Thread Unit Pack Ball valve 3053 Int. + ext. G1/2 PCS 5* Ball valve Ballofix 3057 For shutting of cold and hot water and central heating water. With compression fittings incl. copper liner. Approved according to Boverket (2192/81). Art.no. Description Outer diameter Unit Pack Ball valve 3057 DIY 10 mm PCS 5* Ball valve 3057 DIY 12 mm PCS 5* Ball valve 3057 DIY 15 mm PCS 5* Ball valve Ballofix 3071 For shutting of cold and hot water and central heating water. With compression fittings incl. copper liner. Approved according to Boverket (2192/81). Art.no. Description Thread Unit Pack Ball valve 3071 Ext. G1/2 PCS 5* Ball valve Ballofix 3073 For shutting of cold and hot water and central heating water. Angle with black handle. Incl. gasket. Approved according to Boverket (2192/81). Art.no. Description Thread Unit Pack Ball valve 3073 Int. + ext. G1/2 PCS 5* Ball valve FMM With swivelling nut. With teflon coated ball. Detachable knob. Shaft with key grip. Approved according to SITAC num. 0492/78. Art.no. Orig. num. Description Unit Pack Ball valve Chromed PCS 10* Valve 9385 For water and lighter oils. Valve housing made of PP-plastic. Handle made of nylon. Shaft and thread connection of brass. Ball and hose-coupling nipple made of chromed brass. Max. working pressure 16 bar. Max. working temperature +65 C. Art.no. Description Thread Unit Pack Valve 9385 DIY G1/2 PCS 5* Valve 9385 DIY G3/4 PCS 5* Ball valve 3600 Cut-off valve made of brass for water, gases for instance air, nitrogen, bottled gas, city gas, natural gas, vacuum, some lighter oils and saturated steam at maximum 6 bar. Max. working pressure 40 bar (e). Max temp C. Silicone free. Not for municipal drain water. Art.no. Description Thread Unit Pack Ball valve 3600 G3/8 PCS Ball valve 3600 G1/2 PCS Ball valve 3600 G3/4 PCS Ball valve 3600 G1 PCS Ball valve 3600 G11/4 PCS 1 726

13 Pumps, Tubings, Compression fittings and Drainages Ball valve 3637 Cut-off valve made of brass for fluids and gas systems for instance, air, nitrogen, bottled gas, city gas, natural gas, vacuum, some lighter oils and saturated steam max 6 bar. Max. working pressure 25 bar (e). Max temp C. Silicone free. Not for municipal drain water. Art.no. Description Thread Unit Pack Ball valve 3637 G1/2 PCS 5* Ball valve 3637 G3/4 PCS 5* Ball valve 3637 G1 PCS 5* Ball valve 3637 G11/4 PCS 5* Full bore ball valve Description: Ball valve for air in hose or pipe lines. Handle: Sheet steel Spindle: brass, Ball: brass alloy 58, hard chromeplated brass. Sealing: PTFE/teflon. : -30 till +200 C. Max pressure 30 bar. Art.no. Description Dim. Unit Pack Ball valve female threads 1/4" PCS Ball valve female threads 3/8" PCS Ball valve female threads 1/2" PCS Ball valve female threads 3/4" PCS Ball valve female threads 1" PCS Ball valve female threads 1 1/4" PCS 1 9 Double and airhammer ball valves Description: For connecting claw couplings. Ball valve with lever stop and exhaust. Working pressure: 1,0 MPa. Material: Zinc plated, malleable iron. Brass ball. Art.no. Description Dim. Width Height Unit Pack Airhammer ball valve 3/4" mm 172 mm 95 mm PCS Airhammer ball valve 1" mm 195 mm 88 mm PCS Double ball valve 3/4" mm 240 mm 100 mm PCS Double ball valve 1" mm 240 mm 100 mm PCS 1 Airhammer ball valve Double ball valve Pipe fittings, brass Double nipple Brass Art.no. Description Dimension Unit Pack Double nipple ext G1 thread PCS 5* Double nipple ext G1 1/4 thread PCS 3* Double nipple ext G1xG1/2 thread PCS 5* Double nipple ext G1xG3/4 thread PCS 5* Double nipple ext G1 1/4xG3/4 thread PCS 3* Double nipple ext G1 1/4xG1 thread PCS 3* Chromed Brass Art.no. Description Dimension Unit Pack Double nipple ext G3/8 thread PCS 5* Double nipple ext G1/2 thread PCS 5* Double nipple ext G3/4 thread PCS 5* Double nipple ext G1/2xG3/8 thread PCS 5* Double nipple ext G3/4xG3/8 thread PCS 5* Double nipple ext G3/4xG1/2 thread PCS 5* Bush Brass Art.no. Description Dimension Unit Pack Bush ext G1xG1/2 thread PCS 5* Bush ext G1xG3/4 thread PCS 5* Bush ext G1 1/4xG1/2 thread PCS 5* Bush ext G1 1/4xG3/4 thread PCS 5* Bush ext G1 1/4xG1 thread PCS 5* Bush ext G1 1/2xG1 1/4 thread PCS 5* Chromed Brass Art.no. Description Dimension Unit Pack Bush ext G1/2xG3/8 thread PCS 5* Bush ext G3/4xG3/8 thread PCS 5* Bush ext G3/4xG1/2 thread PCS 5* 727

14 9 Pumps, Tubings, Compression fittings and Drainages Plug Brass Art.no. Description Dimension Unit Pack Plug ext G1 thread PCS 5* Plug ext G1 1/4 thread PCS 5* Chromed Brass Art.no. Description Dimension Unit Pack Plug ext G3/8 thread PCS 5* Plug ext G1/2 thread PCS 5* Plug ext G3/4 thread PCS 5* Elbow Art.no. Description Dimension Unit Pack Elbow Brass int x ext G1 thread PCS 3* Elbow Art.no. Description Dimension Unit Pack Elbow Brass int G1 thread PCS 3* Elbow back plate Art.no. Description Dimension Unit Pack Elbow back plate Brass int G1/2 thread PCS 3* Elbow back plate Brass int G3/4 thread PCS 3* Tee-pipe Art.no. Description Dimension Unit Pack Tee-pipe Brass int G1 thread PCS 3* Reduction nipple Art.no. Description Dimension Unit Pack Reduction nipple Brass int x ext G3/8 thread PCS 5* Reduction nipple Brass int x ext G1/2 thread PCS 5* Reduction nipple Brass int x ext G3/4 thread PCS 5* Reduction nipple Brass int x ext G1 thread PCS 5* Reduction nipple Brass int G1 x ext G1/2 thread PCS 5* Reduction nipple Brass int G1 x ext G3/4 thread PCS 5* Cap with gasket Brass Art.no. Description Dimension Unit Pack Cap with gasket int G1 thread PCS 5* Cap with gasket int G1 1/4 thread PCS 5* Chromed Brass Art.no. Description Dimension Unit Pack Cap with gasket int G3/8 thread PCS 5* Cap with gasket int G1/2 thread PCS 5* Cap with gasket int G3/4 thread PCS 5* Muff Art.no. Description Dimension Unit Pack Muff Brass int G1 thread PCS 3* Muff Brass int G1 1/4 thread PCS 3* Muff Chromed int G1 3/8 thread PCS Muff Chromed int G 1/2 thread PCS Muff Chromed int G1 3/4 thread PCS 1 728

15 Pipe couplings, brass Reduction nipple 3229 Bush 3231 Muff 3275 Elbow 3259, 3261 Angle : Internal thread in both ends. 3261: Internal and external thread. T-pipe 3243 Pumps, Tubings, Compression fittings and Drainages Art.no. Description Thread RSK num. Unit Pack Reduction nipple x8 Brass G 3/8 x G1/ PAC 5 Art.no. Description Thread ext x int RSK num. Unit Pack Bush x6 Brass G1/4 x G 1/ PAC Bush x8 Brass G 3/8 x G 1/ PAC 5 Art.no. Description Thread RSK num. Unit Pack Muff Brass G 3/ PAC Muff Brass G 1/ PAC Muff Brass G 3/ PAC Muff Brass G PAC 5 Art.no. Description Thread RSK num. Unit Pack Elbow Int-Int Brass G 3/ PAC 5* Elbow Int-Int Brass G 1/ PAC 5* Elbow Int-Int Brass G 3/ PAC 5* Elbow Int-Ext Brass G 3/ PAC 5* Elbow Int-Ext Brass G 1/ PAC 5* Elbow Int-Ext Brass G 3/ PAC 5* Art.no. Description Thread RSK num. Unit Pack T-pipe Brass G 3/ PAC 5* T-pipe Brass G 1/ PAC 5* T-pipe Brass G 3/ PAC 5* 9 Floor gullies Floor gully Purus Sigyn stainless steel The removable water trap, making them easy to keep clean. Blue extension ring and a round grating. Made of Acidresistant stainless steel water trap 150 mm. Max. load 500 kp. Auto-adjust clamping ring in connection to the vinyl. When connecting the sealing layer to the floor gully in tiled flooring, the gully should be fitted with a 100 mm wide membrane or plate flange. Made of acid-resistant stainless steel. Fits bath, shower bath etc. Art.no. Description Outlet Capacity RSK num. Unit Pack Floor gully Sigyn 75 R 75 mm 3,0 litres/sec PCS 1 Floor gully Purus Balder stainless steel The removable water trap, making them easy to keep clean. Blue extension ring and a round grating. Made of Acidresistant stainless steel water trap 150 mm. Auto-adjust clamping ring in connection to the vinyl. Max. load 500 kp. When connecting the sealing layer to the floor gully in tiled flooring, the gully should be fitted with a 100 mm wide membrane or plate flange. Fits bath, shower bath etc. Art.no. Description Outlet Capacity RSK num. Unit Pack Floor gully Balder 75 R 75 mm 3,0 litres/sec PCS 1 Gratings Purus PK stainless steel Square frame and grating in stainless steel. Max. load 300 kp. Art.no. Description Dimension x height Height PK-ring RSK num. Unit Pack PK-ring PK 175 Art Deco 175x175 mm 6 mm PCS PK-ring PK 175 Wave 175x175 mm 6 mm PCS PK-ring PK 175 Drop 175x175 mm 6 mm PCS PK-ring PK 175 Classic 175x175 mm 6 mm PCS 1 Classic 729

16 9 Pumps, Tubings, Compression fittings and Drainages With hole PK-ring Purus PK 175 stainless steel They can be used for all types of sealing layer and brick floors. Frame and grating in stainless steel. Max. load 300 kp. Art.no. Description Dimension x height Height PK-ring RSK num. Unit Pack PK-ring PK x175 mm 6 mm PCS 1 PK-ring Purus PK 200 stainless steel Square frame and grating in stainless steel. Max. load 300 kp. Art.no. Description Dimension x height Height PK-ring RSK num. Unit Pack PK-ring PK x200 mm 6 mm PCS 1 Grating Purus SR 150 stainless steel Grating in stainless steel to the vinyl. Art.no. Description Load classification Max. load Diam. RSK num. Unit Pack Grating SR 150 U, with hole K3 500 kp 150 mm PCS 5* Grating SR 150 U, no hole K3 500 kp 150 mm PCS 5* Without hole Frame and grating KGC With grating. Art.no. Description Measure, dimension Unit Pack Frame and grating 7534 White 200x200x7 mm PCS Frame and grating 7536, with hole White 200x200x7 mm PCS Frame and grating 7530 Stainless 200x200x7 mm PCS Frame and grating 7531, with hole Stainless 200x200x7 mm PCS 1 Floor gully Purus Freja ROT Type-approved floor gully made of ABS plastic. Extra-low profile, H=102 mm, with 50 mm outlet. Suitable for renovation jobs. Delivered with removeable water trap inset for easy cleaning. Auto-adjust clamping ring KL 150, for vinyl and coupling gaskets. Plastic grating which is snapped into place P 150 U. Load classification according to EN 1253: K3. Can be locked with screw set. Installation instructions. Art.no. Description Dimension Capacity RSK num. Unit Pack Floor gully Freja ROT 150x50 mm 2,0 litres/sec PCS 1 Floor gully Purus Type-approved floor gully made of ABS-plastic, with 50 mm bottom outlet. Extra-low profile H=97 mm. Delivered with removeable water trap inset for easy cleaning. Auto-adjust clamping ring KL 150, for vinyl and coupling gaskets. Plastic grating which is snapped into place P 150 U. Load classification according to EN 1253:K3. Can be locked with screw set. Installation instructions. Art.no. Description Dimension Capacity RSK num. Unit Pack Floor gully 150x50 mm 2,0 litres/sec PCS 1 Floor gully Purus Oden Type-approved floor gully made of polypropylene plastic (PP). With low profile and high capacity. Outlet 75 mm. Delivered with removeable water trap inset (RAN) for easy cleaning. Auto-adjust clamping ring, KL150, for vinyl and coupling gaskets. Plastic grating which is snapped into place P 150 U. Load classification according to EN 1253:K3. Can be locked with screw set. Installation instructions. Art.no. Description Dimension Capacity RSK num. Unit Pack Floor gully Oden vinyl 150x75 mm 3,0 litres/sec G PCS Floor gully Oden brick 175x75 mm 3,0 litres/sec G PCS 1 Floor gully Purus Brage Type-approved bottom-emptying plastic floor gully with outlet spigot that can be cut to size. Removable water trap RAN for easy cleaning. Auto-adjust clamping ring KL150. Plastic grating which is snapped into place P 150 U. Load classification according to EN 1253:K3. Can be locked with screw set. Installation instructions. Art.no. Description Dimension Capacity RSK num. Unit Pack Floor gully Brage vinyl 150x75 mm 3,0 litres/sec G PCS Floor gully Brage brick 150x75 mm 3,0 litres/sec G PCS 1 Removable water trap inset Purus RAN Water trap for Oden, Brage, Sigyn, Balder floor gully. Can be split, easy to keep clean. Made of polypropylene plastic (PP). Art.no. Description Capacity RSK num. Unit Pack Water trap inset RAN 3,0 litres/sec PCS 1 730

17 Pumps, Tubings, Compression fittings and Drainages Removable water trap inset Purus NOOD Water trap effectively stops back flows, gas leaks, foul air. Fits the floor gullies - Oden, Brage, Sigyn, Balder. Made of polypropylene plastic (PP). Also available in stainless steel. Art.no. Description Capacity RSK num. Unit Pack Water trap inset NOOD 3,0 litres/sec PCS 1 Overflow protection Purus Safe, for vinyl floors Protection according to BBR 6:614 when floor gullies i missing. Unintentional outflow of warm or cold water. With removable, automatic odour-stop, preventing foul air from the drainage system, even if the odour-stop is dry. Outletunit of PP-plastic. Made of polypropylene plastic (PP). The floor around the SAFE does not need to have inclination. BBR 6:534. Art.no. Description Capacity RSK num. Unit Pack Overflow protection 0,4 litres/sec PCS 1 Overflow protection Purus Safe, for tiled- and brick floors Protection according to BBR 6:614 when floor gullies i missing. Unintentional outflow of warm or cold water. With removable, automatic odour-stop, preventing foul air from the drainage system, even if the odour-stop is dry. Removable grating, made of stainless steel. Made of polypropylene plastic (PP). The floor around the SAFE does not need to have inclination. BBR 6:534. Art.no. Description Capacity Measure RSK num. Unit Pack Overflow protection 0,4 litres/sec. 95x95 mm PCS 1 9 Grating, plastic Purus P 150 The grating is designed for use with vinyl floors. Gratings with hole - intended for pipes max. 40 mm. Art.no. Description Load classification Max. load Diam. RSK num. Unit Pack Grating, plastic P 150, with hole K3 300 kp 150 mm PCS 5* Grating, plastic P 150, no hole K3 300 kp 150 mm PCS 5* With hole Knife Purus 150 For making holes in vinyl floors for floor gullies. Joining a vinyl floor to a Purus gully - with the Purus knife. When the Purus auto-adjust clamping ring (the blue one) is used, the vinyl should not be glued to the gully. N.B. Screws, glue and sealing compound may not be used on Purus floor gullies. Art.no. Description Dimension RSK num. Unit Pack Knife mm PCS 1 Without hole Clamping ring Purus KL 150 Auto-adjust clamping rings provide the vinyl floor with the correctclamping pressure and self-adjust automatically and plate flange. Art.no. Description Dimension Specific inf RSK num. Unit Pack Clamping ring KL mm Blue Plastic Automatic PCS 5* Plate Purus 300 For the installation of floor gullies in timber-joist floors, 22 mm. Intended for 300 c/c wood. Delivered with blocks in heights 6 mm and 13 mm, 4 pcs of each. Made of ABS plastic. Art.no. Description Dimension RSK num. Unit Pack Plate Purus mm PCS 1 Extension ring Purus round Made of ABS plastic. Complete with O-ring seal. Art.no. Description Dimension Height Unit Pack Extension ring round 150 mm 13 mm White PCS Extension ring round 150 mm 25 mm White PCS 1 Extension ring Purus square Made of ABS plastic. Complete with O-ring seal. Art.no. Description Dimension Height Unit Pack Extension ring square 150 mm 13 mm White PCS 1 731

18 9 Pumps, Tubings, Compression fittings and Drainages Drainages Rubber nipple/combi nipple Purus The nipples are used as an elastic seal at the transition from one dimension to another. The only rubber/combi nipple range on the market that is approved for horizontal and vertical installation. They are also approved for internal use. EPDM rubber in the rubber nipples and TPE in the combi-nipples are materials you can rely on. Type-approved by SITAC. Art.no. Description D1/D2 RSK num. Unit Pack Rubber nipple 43/32 mm Black PCS Rubber nipple 45/32 mm Black PCS Rubber nipple 43/40 mm Black PCS Rubber nipple 45/40 mm Black PCS Combi nipple 75-70/50-40 mm Black PCS Combi nipple 64-58/50-40 mm Black PCS Combi nipple 50-40/32 mm Black PCS Combi nipple 96-83/75-50 mm Black PCS 5* Combi nipple /75 mm Black PCS Combi nipple /50 mm Black PCS 1 Water trap washbasin Design Purus chrome Complete kits with bottle water trap. Pipe fitting, square. Wall mounting. Art.no. Description G1 (int) D1 H1 RSK num. Unit Pack Water trap washbasin set G11/4" 32 mm mm Bright chrome PCS 1 Water trap washbasin Design Purus wall chrome Complete kits with bottle water trap. Pipe fitting. Wall mounting. Art.no. Description G1 (int) D1 H1 L1 RSK num. Unit Pack Water trap washbasin set G11/4" 32 mm mm 265 mm White PCS Water trap washbasin set G11/4" 40 mm mm 265 mm White PCS Water trap washbasin set G11/4" 40 mm mm 265 mm Chrome PCS 1 Water trap washbasin Universal Purus For connection to bottom outlet 1 1/4" and with outlet 40 mm. For wall or floor connection. : white. Art.no. Description G1 (int) D1 H1 L1 RSK num. Unit Pack Water trap washbasin 11/4" 40 mm mm mm G PCS 1 Water trap washbasin s-trap Purus Complete kits with bottle water trap. All bottle water traps are type-approved by SITAC. Flow capacity 0.6 l/s. Water trap: Polypropylene (PP). Outlet pipe: ABS. Gasket: EPDM rubber. White. Art.no. Description G1 (int) D1 H1 L1 RSK num. Unit Pack Water trap washbasin G11/4" 40 mm mm mm PCS 1 Water trap washbasin, angled Purus Complete kits with bottle water trap. All bottle water traps are type-approved by SITAC. Flow capacity 0.6 l/s. Water trap: Polypropylene (PP). Outlet pipe: ABS. Gasket: EPDM rubber. Art.no. Description G (int) D1 H1 L1 RSK num. Unit Pack Water trap washbasin G11/4" 40 mm 695 mm mm White PCS Water trap washbasin G11/4" 40 mm 695 mm mm Chrome PCS 1 732

19 Water trap washbasin, straight Purus Complete kit. Water trap: Polypropylene (PP). Outlet pipe. Gasket: EPDM rubber. Water trap washbasin Purus Eliminates hole making. Pumps, Tubings, Compression fittings and Drainages Art.no. Description G1 (int) D1 H1 RSK num. Unit Pack Water trap washbasin G11/4" 40 mm 650 mm White PCS 30* Art.no. G1 (int) D1 D2 H1 L2 L1 RSK num. Unit Pack /4" 32 mm 40 mm mm mm 340 mm PCS 1 Outlet kit with water trap Purus Attached on the wall with clips, works as outlet for washing machine where the water trap is missing on the floor. Art.no. Description H1 D1 RSK num. Unit Pack Outlet kit with water trap 1110 mm 32 mm White PCS 1 9 Outlet kit without water trap Purus Polypropylene (PP). Art.no. Description L1 H1 H2 H3 D1 RSK num. Unit Pack Outlet kit without water trap 825 mm 160 mm 62 mm 0-12 mm 32 mm White PCS Plug, extra White PCS 5 Water trap washbasin, bottle Purus For connection to the bottom outlet 11/4" and with outlet 40 mm. For wall or floor connection. Art.no. Description G1 (int) D1 RSK num. Unit Pack Water trap washbasin, bottle 11/4" 40 White PCS 5 Water trap Purus Fits bath, shower bath etc. and with outlet 50 mm. Art.no. Description D1 D2 H1 RSK num. Unit Pack Water trap 40 mm G11/2" 90 mm White PCS 5 Water trap Purus Fits 32 pipes, use reduction 40/32 ( ). Art.no. Description D1 H1 RSK num. Unit Pack Water trap 40 mm 85 mm White PCS 5 Eccentric adaptor Purus Eccentric adaptor 0-50 mm. ABS. Art.no. Description G1 (int) G2 (ext) H1 RSK num. Unit Pack Eccentric adaptor 11/4" mm 11/4" mm 70 mm White PCS 5* 733

20 9 Pumps, Tubings, Compression fittings and Drainages Pipes, PP for inset Purus Fittings with compression ends. Material ABS. Art.no. Description D1 L1 RSK num. Unit Pack PP Pipe 32 mm 2000 mm White PCS PP Pipe 32 mm 1000 mm Chrome plated PCS 5* PP Pipe 40 mm 2000 mm White PCS PP Pipe 40 mm 1000 mm Chrome plated PCS 5* PP Pipe for gluing 32 mm 1000 mm White PCS 5 Outlet pipes, angled Purus Material ABS. Art.no. Orig. num. Description D1 L1 Angle Unit Pack G Outlet pipes, angled 32 mm 600 mm 160 mm White PCS G Outlet pipes, angled 40 mm 600 mm 160 mm White PCS 1 Telescopic inlet pipe Purus Fits the bottle water trap when the old is too short. With gasket. Art.no. Description Measure RSK num. Unit Pack Telescopic inlet pipe G 11/4"x32x200 mm White PCS 5 Pipe grinder Purus For burring of plastic pipes, for internal and external burring. Art.no. Description Dimension diam. RSK num. Unit Pack Pipe grinder mm Red PCS 5* Nut / Cone Purus Nut, Polypropylene (PP). Cone, TPE Cone D1 32 mm 40 mm Nut G1 11/4" mm 11/2" mm Nut H1 15 mm 15 mm, Nut White White, Cone Black Black Contains, nut+cone/pack 2+2 pcs 2+2 pcs Art.no. Description RSK nr, Nut/Cone Unit Pack Nut / Cone / PAC Nut / Cone / PAC 5 Connector with compression ends, 90 bend Purus Polypropylene (PP). Art.no. Description D1 G1 (int) L1 L2 RSK num. Unit Pack Connector 90 bend 32 mm 11/4" mm 35 mm 49 mm White PCS Connector 90 bend 32 mm 11/2" mm 33 mm 50 mm White PCS 5 Reverse nut adaptor, internal thread Purus Completes push-in coupling with thread. Material, Polypropylene (PP). Art.no. Description G1 D1 H1 RSK num. Unit Pack Reverse nut adaptor 11/2" 32 mm 37 mm White PCS Reverse nut adaptor 11/4" 32 mm 37 mm White PCS Reverse nut adaptor 11/2" 40 mm 37 mm White PCS 5 734

21 Threaded adaptor, external thread Purus Completes push-in coupling with thread. Material, Polypropylene (PP). Straight connector, pipe fitting Purus Polypropylene (PP). Pumps, Tubings, Compression fittings and Drainages Art.no. Description G1 G2 D1 L1 RSK num. Unit Pack Threaded adaptor 11/4" - 32 mm 65 mm White PCS Threaded adaptor 1 1/2" - 32 mm 65 mm White PCS Threaded adaptor 1" - 32 mm 65 mm White PCS Threaded adaptor 3/4" 1/2" 32 mm 65 mm White PCS 5 Art.no. Description D1 D2 L1 RSK num. Unit Pack Straight connector 32 mm 40 mm 58 mm White PCS 5* Bend 90, double socket Purus The fittings have an integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1 L1 RSK num. Unit Pack Bend 90, double socket 32 mm 61 mm White PCS Bend 90, double socket 32 mm 61 mm Chrome plated PCS 5* Bend 90, double socket 40 mm 64 mm White PCS Bend 90, double socket 40 mm 64 mm Chrome plated PCS 5* Bend 90, Spigot/Socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1/D2 L1/L2 RSK num. Unit Pack Bend 90, Spigot/Socket 32/32 mm 61/26 mm White PCS Bend 90, Spigot/Socket 32/32 61/26 mm Chrome plated PCS 5* Bend 90, Spigot/Socket 40/40 mm 61/20 mm White PCS Bend 90, Spigot/Socket 40/40 mm 61/20 mm Chrome plated PCS 5* Bend 45, double socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1 L1 RSK num. Unit Pack Bend 45, double socket 32 mm 42 mm White PCS Bend 45, double socket 32 mm 42 mm Chrome plated PCS 5* Bend 45, double socket 40 mm 42 mm White PCS Bend 45, double socket 40 mm 42 mm Chrome plated PCS 5* Bend 45, Spigot/Socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1/D2 L1 RSK num. Unit Pack Bend 45, Spigot/Socket 32/32 mm 45 mm White PCS Bend 45, Spigot/Socket 32/32 mm 45 mm Chrome plated PCS 5* Bend 45, Spigot/Socket 40/40 mm 45 mm White PCS Bend 45, Spigot/Socket 40/40 mm 45 mm Chrome plated PCS 5* Single Branch 90, all socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP). Art.no. Description D1 H1 L1 RSK num. Unit Pack Single Branch 90, all socket 32 mm 118 mm 59 mm White PCS Single Branch 90, all socket 40 mm 118 mm 59 mm White PCS 5 9 Single Branch 45, all socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1 H1 RSK num. Unit Pack Single Branch 45, all socket 40 mm 140 mm White PCS Single Branch 45, all socket 32 mm 140 mm White PCS Single Branch 45, all socket 40 mm 140 mm Chrome plated PCS 5* Single Branch 45, all socket 32 mm 140 mm Chrome plated PCS 5* 735

22 9 Pumps, Tubings, Compression fittings and Drainages Straight Coupler-double socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1 L1 RSK num. Unit Pack Straight Coupler-double socket 32 mm 84 mm White PCS Straight Coupler-double socket 32 mm 84 mm Chrome plated PCS 5* Straight Coupler-double socket 40 mm 85 mm White PCS Straight Coupler-double socket 40 mm 85 mm Chrome plated PCS 5* Socket Plug Purus Material, Polypropylene (PP). Art.no. Description D1 RSK num. Unit Pack Socket Plug 32 mm White PCS Socket Plug 40 mm White PCS 5 Reducer 40/32 double socket Purus The fittings have a integrated TPE gasket. Withstands temperatures, temporary: 90 C. Type-approved by Sitac. For easy and rapid mounting. Material, Polypropylene (PP) and ABS. Art.no. Description D1 D2 L1 RSK num. Unit Pack Reducer double socket 32 mm 40 mm 44 mm White PCS 5 Outlet hose Purus With bracket. Art.no. Description Length Connecting diam. RSK num. Unit Pack Outlet hose 2500 mm 19, 21 mm Grey PCS 5* Washbasin connector, TS-40 Purus Seals against vinyl with no risk of leakage. Both for floor and wall installation. The product are recommended by (GVK). Art.no. Description D1/D2/D3 H1 RSK num. Unit Pack Washbasin connector 40/40/80 mm 89 mm White PCS 5 Dishwasher and washing machine connection Purus For connection to gullies. Includes hose coupling, nut, gasket. Material, Polypropylene (PP). Art.no. Description D1 G1 G2 L1 RSK num. Unit Pack Connection 32 mm 11/4" mm 1" mm mm White PCS 5* Connection 40 mm 11/2" mm 1" mm mm White PCS 5* Hose connector for threaded adaptor Purus Intended for thread connector 1", art. no Art.no. Description G1 RSK num. Unit Pack Hose connector for threaded adaptor 1" White PCS 5 Tundish Purus The fittings with socket have an integrated gasket. Large tolerance, flexible, stable and heat resistant. Quick and easy mounting. Material, Polypropylene (PP). Art.no. Description D1 B1 H1 RSK num. Unit Pack Tundish 32 mm 70 mm 190 mm White PCS 5 736

23 Coupling gasket Purus Thermoplastic elastomer (TPE). Pumps, Tubings, Compression fittings and Drainages Art.no. Description Ext/int diam. Height RSK num. Unit Pack Coupling gasket 110/90 mm 40 mm Black PCS Coupling gasket 146/90 mm 40 mm Black PCS 5 WC connector Purus Material: TPE-rubber plastic, recyclable. Cuttable in different heights. For more information, please contact us. Art.no. Description RSK num. Unit Pack WC connector Rot Black PCS 1 WC connector Purus Wide sleeve which seals over the edge of the vinyl. Locking ring which provides extra security (no floor cover necessary). Fits in spigot end 110 NA, PP, PVC and 4 normal pipe.supplied with odour-stop. Polypropylene plastic (PP). The product is recommended by the GVK. Art.no. Description L1 H1 Note RSK num. Unit Pack WC connector 140 mm 55 mm Exc 0-13 mm White PCS 20* 9 Floor cover for WC Purus 2-part fits over normal pipe with 4" socket. Polypropylene plastic (PP). Art.no. Orig. num. Description D1 H1 Unit Pack G Floor cover mm 65 mm White PCS 5 Floor cover for WC, 2-part Purus 2-part fits over normal pipe with 4" socket. Polypropylene plastic (PP). Art.no. Description D1 H1 RSK num. Unit Pack Floor cover 2-part 180 mm 90 mm White PCS 5 Air admittance valve Purus ABS plastic. Art.no. Description RSK num. Unit Pack Air admittance valve 40 White PCS 1 Air admittance valve Purus ABS plastic. Art.no. Description RSK num. Unit Pack Air admittance valve 1/2" White PCS 1 Clips Purus Stable. For wet areas. Polypropylene plastic (PP). Art.no. Description Dimension, diam. RSK num. Contents Unit Pack Clips 32 mm White pcs PAC Clips 40 mm White pcs PAC 5 Distance plate to clips Purus Distance from wall and floor mm. For wet areas, with sealings round the hole. Art.no. Orig. num. Description Diam. Height Contents Unit Pack G Distance plate to clips 32 mm 5 mm White 2 pcs PAC 2* G Distance plate to clips 40 mm 5 mm White 2 pcs PAC 2* 737

24 9 Pumps, Tubings, Compression fittings and Drainages Drip strip Purus The drip strip prevents water passing down to the floor between the wall and bathtub. The drip strip is easily installed with double-sided sticky tape. No screws making holes in the sealing layer. An installation that is safe for wet rooms. *Incl. corner joint and end cover. Art.no. Description Measure lxw RSK num. Unit Pack Drip strip complete 1700x800 mm White PCS Drip strip* 800 mm White PCS 1 Lubricating oil Purus Used to facilitate mounting with forced fitting. Art.no. Description Temp max Contents Unit Pack Lubricating oil 90ºC 5 g PAC 1 Drain cleaners Washing plate / Sink Plunger Purus Made in EPDM. The gasket kit contains gaskets 39x29x2 and 44x32x2. Art.no. Description Diameter Handle length Temp. range RSK num. Unit Pack Washing plate 185 mm - -50ºC ºC PCS Sink Plunger 100 mm 250 mm -60ºC ºC PCS Sink Plunger 130 mm 250 mm -60ºC ºC PCS Sink Plunger 150 mm 250 mm -60ºC ºC PCS Gasket kit PCS 5* Drainages; Sink plungers Drain cleaning hoop 109, swivel 47 Made of cold-rolled, hardened steel. 4-winged swivel. Treated with rust inhibiting oil. Delivered with a holder. Art.no. Type Width Thickness Length Unit Pack Drain cleaning hoop mm 1,6 mm 7.5 m PCS Drain cleaning hoop mm 1,6 mm 15 m PCS Drain cleaning hoop mm 1,6 mm 10 m PCS Drain cleaning hoop mm 1,6 mm 15 m PCS Drain cleaning hoop mm 1,6 mm 22,5 m PCS Drain cleaning hoop mm 2,4 mm 30 m PCS Swivel For 6-12 mm band - - PCS Swivel For mm band - - PCS 1 Drain cleaning hoop 108 DIY Made of special steel with a spring for cleaning basins, drains e.g. Art.no. Description Width Thickness Length Unit Pack Drain cleaning hoop mm 1,6 mm 12,5 m PCS 1 Drain cleaning hoop 107 Mini A small cleaning hoop for cleaning basins, drains, Floor gullies etc. Hardened steel. Art.no. Description Width Length Unit Pack Drain cleaning hoop 107 Mini 3,8 mm 7.5 m PCS 1 738

25 Bathroom accessories Bathroom sets Bathroom set Cabin Bathroom accessories 9 Cabin is available in brushed and polished chrome finish. The core material is solid brass. This range features sleek, elegant lines and a rounded corner to the back plate adding a contemporary elegance to your bathroom. Satin chrome Art.no. Description Attachment wxh Dim. Distance to wall Unit Pack Holder with glass soap dish 45x61 mm B 132 mm 100 mm PCS 3* Holder with glass tumbler 45x61 mm H 80 mm 105 mm PCS 3* Tumbler PCS Towel ring 45x61 mm H 160, B 218 mm - PCS 3* Quadruple hook 150x45 mm Between hooks 93 mm 36 mm PCS 3* Towel hook - Diam. 17 mm 27 mm PAC 6* Double towel hook 45x61 mm - 36 mm PCS 6* Single towel rail 45x61 mm W 600 mm - PCS 3* Double towel rail 45x61 mm W 600 mm - PCS 2* Swing arm towel rail 45x61 mm W 440 mm - PCS 2* Glass bathroom shelf 45x61 mm W 600 mm 120 mm PCS 2* Toilet roll holder 45x61 mm W 165, H 122 mm - PCS 3* Toilet roll holder 45x61 mm W 165, H 122 mm - PCS 3* Spare toilet roll holder 45x61 mm H 175 mm 71 mm PCS 3* Mirror - W 475, H 695 mm - PCS Single soap basket - W 198, H 130 mm 100 mm PCS 2* Double soap basket - W 198, H 280 mm 100 mm PCS 2* Toilet brush - W 135, H 380 mm - PCS Toilet brush, extra PCS Soap dispenser - H 160 mm 95 mm PCS 2* Handtag 55x71 mm W 275 mm 66 mm PCS 1 Chrome Art.no. Description Attachment wxh Dim. Distance to wall Unit Pack Holder with glass soap dish 45x61 mm B 132 mm 100 mm PCS 3* Holder with glass tumbler 45x61 mm H 80 mm 105 mm PCS 3* Tumbler PCS Towel ring 45x61 mm H 160, B 218 mm - PCS 3* Quadruple hook 150x45 mm Between hooks 93 mm 36 mm PCS 3* Towel hook - Diam. 17 mm 27 mm PAC 3* Double towel hook 45x61 mm - 36 mm PCS 6* Single towel rail 45x61 mm W 600 mm - PCS 3* Double towel rail 45x61 mm W 600 mm - PCS 2* Swing arm towel rail 45x61 mm W 440 mm - PCS 2* Bathroom shelf 45x61 mm W 600 mm 120 mm PCS 2* Toilet roll holder 45x61 mm W 165, H 122 mm - PCS 3* Toilet roll holder 45x61 mm W 165, H 122 mm - PCS 3* Spare toilet roll holder 45x61 mm H 175 mm 71 mm PCS 3* Mirror - W 475, H 695 mm - PCS Single soap basket - W 198, H 130 mm 100 mm PCS 2* Double soap basket - W 198, H 280 mm 100 mm PCS 2* Toilet brush - W 135, H 380 mm - PCS Toilet brush, extra PCS Soap dispenser - H 160 mm 95 mm PCS 2* Grab bar 55x71 mm W 275 mm 66 mm PCS 6* 739

26 9 Bathroom accessories Bathroom hooks, metal Towel hook 123 Art.no. Description Type Measure, wxh Unit Pack Towel hook DIY 2-hooks Brass, nickel plated 106x25 mm PAC Towel hook DIY 3-hooks Brass, nickel plated 170x25 mm PAC Towel hook DIY 4-hooks Brass, nickel plated 230x25 mm PAC Towel hook DIY 5-hooks Brass, nickel plated 290x25 mm PAC Towel hook DIY 6-hooks Brass, nickel plated 355x25 mm PAC Towel hook DIY 2-hooks Brass, white lacquered 106x25 mm PAC 6 Towel hook 1803 Art.no. Description Type Measure, wxh Unit Pack Towel hook 2-hooks White lacquered 160x45 mm PAC Towel hook 2-hooks Chrome 160x45 mm PAC Towel hook 4-hooks White lacquered 335x45 mm PAC Towel hook 4-hooks Chrome 335x45 mm PAC 5 Bathroom hooks, plastic Powerstrip hook tesa Self-adhesive. Plastic. Art.no. Description Type Contents Unit Pack Hook Classic White 2 hooks/4 strips PAC Hook Oval White 2 hooks/4 strips PAC Hook Oval Chrome 2 hooks/4 strips PAC 6 Towel accessory Plastic. Art.no. Description Unit Pack Towel accessory White PAC 13 Bathroom hooks, self-adhesive Hook chromed Self-adhesive. Art.no. Description Type Measure, wxh Unit Pack Hook Large Plastic Chrome 33x55 mm PAC Hook Medium Plastic Chrome 26x42 mm PAC Hook Small Plastic Chrome 15x25 mm PAC 12 Hook plastic Self-adhesive. Art.no. Description Type Measure, wxh Unit Pack Hook Large Plastic White 33x55 mm PAC Hook Medium Plastic White 26x42 mm PAC Hook Small Plastic White 15x25 mm PAC 12 Hook Thomas Self-adhesive. Plastic. Art.no. Description Type Measure, hxw Contents Unit Pack Thomas hook Medium White 30x30 mm 3 pcs PAC Thomas hook Large White 50x50 mm 2 pcs PAC Thomas hook "Gäster" White 30x30 mm 1 pc PAC Thomas hook Kitchen White 4 pcs PAC Multi hook 5 - White 40x250 mm 1 pc PCS Multi hook 3 - White 40x150 mm 1 pc PCS Multi hook 4 - White 40x200 mm 1 pc PCS 6 Toilet roll holder Toilet roll holder Grunda DIY Screw holes cc 75 mm. Art.no. Description Measure, lxh Distance to wall Unit Pack Toilet roll holder Bright chrome 125x85 mm 78 mm PAC 5* Toilet roll holder White 125x85 mm 78 mm PAC 5* 740

27 Toilet roll holder 3700 Art.no. Description Measure, wxhxd Unit Pack Toilet roll holder White Plastic 146x80x80 mm PAC 1 Spare toilet roll holder 2229 Art.no. Description Height Unit Pack Spare toilet roll holder Brass chrome Chrome 165 mm PCS 5* Spare toilet roll holder White 165 mm PAC 5 Kitchen roll holders 3510 Art.no. Description Unit Pack Kitchen roll holders Chrome PAC 1 Bathroom mirrors Mirror Tilde Femett The fully tilted mirror makes it possible for both people standing up and people in wheelchair to use the mirror to the maximum. Steel plate, with powder coating, easy to clean. 3 attachments, easy to mount. Art.no. Description Measure wxhxd Unit Pack Mirror 525x712x40 mm PCS 1 Bathroom accessories 9 WC mirror 4 mm silver coated float glass. Grided, bright edges. Art.no. Description Measure hxw Unit Pack Mirror 510x390 mm PCS Mirror 600x450 mm PCS Mirror 720x510 mm PCS Mirror 800x600 mm PCS Mirror 900x450 mm PCS Mirror 600x600 mm PCS 4 Mirror, Wall mirror The package is provided with a handle. Silver coated float glass, protected with one layer of cupper and one layer of paint, dried in a oven. The edges are grinded. Intended for hall rooms, living rooms or bathrooms. The mirror bracket fittings are included, 4 pcs per package. Art.no. Description Measure, hxw Contents Unit Pack Mirror, DIY 510x390 mm 1 pc PCS 10* Mirror, DIY 600x450 mm 1 pc PCS 10* Wall mirror with fittings 450x600 mm 4 pcs PAC Mirror bracket fittings - 10 pcs PAC 1 Mirror For public enviroments, schools, sports arenas e.g. Thickness 1,5 mm. Art.no. Description Measure, hxw Unit Pack Mirror Stainless plate 400x600 mm PCS 1 Mirror bracket fitting Each package contains 2 fixed and 2 spring cushioned fittings. DIY-pack. Screws are included. Art.no. Description Contents Unit Pack Mirror bracket fitting Nickel brass 1 pc PAC Mirror bracket fitting Nickel iron 4 pcs PAC 50* Mirror bracket fitting Nickel brass 4 pcs PAC 50* 741

28 9 Bathroom accessories Satin brushed Bathroom signs Door plate Man & Woman Osmos Self-adhesive. Art.no. Description Diam. Unit Pack Door plate Man Polished Stainless steel 80 mm PCS Door plate Man Satin brushed Stainless steel 80 mm PCS Door plate Woman Polished Stainless steel 80 mm PCS Door plate Woman Satin brushed Stainless steel 80 mm PCS Door plate Man & Woman Polished Stainless steel 80 mm PCS Door plate Man & Woman Satin brushed Stainless steel 80 mm PCS 1 Door plate WC Osmos Self-adhesive. Art.no. Description Diam. Unit Pack Door plate "WC" Polished Stainless steel 80 mm PCS Door plate "WC" Satin brushed Stainless steel 80 mm PCS 1 Polished Toilet seats, glass fibre reinforced polyester Cornflower Pool blue Anthracite grey Cooper Toilet seat Kan 2001 Universal design. Fits most WC s. : Body made in wood chips, covered with glass fibre reinforced polyester. The surface is enamelled with polyurethane. This varnish is resistant to many chemicals. The hinges are made in durable polyamide. Mounting instructions: The seat can be mounted on WC s with centre spacing mm. Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: The seat can easily be cleaned on place, but due to the quick release hinge, it can also be removed from the WC for cleaning. Use normal mild cleaning liquids (avoid liquids containing abrasives). In order to avoid damages to the surface, avoid solvents like thinners and acetone. Art.no. Orig. num. Description Unit Pack Toilet seat White, glossy PCS 6* Toilet seat Red, glossy PCS 6* Toilet seat Topaz, glossy PCS 6* Toilet seat Black, glossy PCS 6* Toilet seat Grey, glossy PCS 6* Toilet seat Anthracite grey, glossy PCS 6* Toilet seat Yellow, glossy PCS Toilet seat Light blue, glossy PCS 6* Toilet seat Cornflower, glossy PCS 6* Toilet seat Pool blue, glossy PCS 6* Toilet seat Navy blue, glossy PCS Toilet seat Honey, glossy PCS 6* Toilet seat Chestnut, glossy PCS 6* Toilet seat Whisper peach, glossy PCS 6* Toilet seat Medium blue, glossy PCS 6* Toilet seat Blue ocean, glossy PCS 6* Toilet seat Cobalt blue, glossy PCS 6* Toilet seat Ultra marine, glossy PCS 6* Toilet seat Bordeaux, glossy PCS 6* Toilet seat Whisper green, glossy PCS 6* Toilet seat Moss green, glossy PCS 6* Toilet seat Pergamon, glossy PCS 6* Toilet seat Ambre pale, glossy PCS 6* Toilet seat Bahama beige, glossy PCS 6* Toilet seat Graphite, mat PCS 6* Toilet seat Azzurro, mat PCS 6* Toilet seat Kan 2001, metallic/mother-of-pearl Universal design. Fits most WC s. : Body made in wood chips, covered with glass fibre reinforced polyester. The surface is enamelled with polyurethane. This varnish is resistant to many chemicals. The hinges are made in durable polyamide. Mounting instructions: The seat can be mounted on WC s with centre spacing mm. Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: The seat can easily be cleaned on place, but due to the quick release hinge, it can also be removed from the WC for cleaning. Use normal mild cleaning liquids (avoid liquids containing abrasives). In order to avoid damages to the surface, avoid solvents like thinners and acetone. Art.no. Orig. num. Description Unit Pack Toilet seat Granite grey, metallic PCS 6* Toilet seat Blue, metallic PCS 6* Toilet seat Silver, metallic PCS 6* Toilet seat Silky silver, metallic, mat PCS 6* 742

29 Toilet seat Kan Exclusive Relief The seat Exclusive has separate buffering of the ring and lid, for soft and quiet closing. Universal design. Fits most WC s. : Body made in wood chips, covered with glass fibre reinforced polyester. The surface is enamelled with polyurethane. This varnish is resistant to many chemicals. The hinges are made in durable polyamide. Mounting instructions: The seat can be mounted on WC s with centre spacing mm (on special request mm for old toilet seats). Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: The seat can easily be cleaned on place, but due to the quick release hinge, it can also be removed from the WC for cleaning. Use normal mild cleaning liquids (avoid liquids containing abrasives). In order to avoid damages to the surface, avoid solvents like thinners and acetone. Art.no. Orig. num. Description Unit Pack Toilet seat Black PCS 6* Toilet seat Silver/Metallic PCS 6* Toilet seats wood Toilet seat Kanwood Nordia : Made in solid wood. Mounting instructions: The seat can be mounted on WC s with centre spacing mm. Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: Quick release for easy cleaning. Wood is a natural material and should be treated with care, in order to avoid damages to the surface. Use normal mild cleaning liquids i.e. soap water. When necessary, furniture polish can be used to improve the finish. Specially designed to fit narrow fronts IFÖ: Cera, Ceranova, City, Cascade, Carezza. IDO: Evita, 59. GUSTAVSBERG: Epic. Art.no. Orig. num. Description Unit Pack Toilet seat Birch cherry coloured PCS 6* Toilet seat Birch antique PCS 6* Toilet seats plastic Toilet seat Kanlette Universal design. Fits most WC s. Specially designed to fit. Gustavsberg: All from 1949 to 1995, Classic, Epic, Atlantic, Nordic 1993-, Scandic 1995-, Delphi IDO: All , Aniara , Trevira 1993-, Evita 1999-, Lilje. IFÖ: Carezza 1974, Cascade , Aqua , Aqua , Cera 1992-, Ceranova, City 2001-, Carat. Svedbergs: 9020, 9021, 9022, 8095, Villeroy&Boch: Gracia, Grangracia. : Made of ultrastrong polypropylene. Mounting instructions: The Kanlette fits all WC pans with fitting holes from 130 mm up to 170 mm apart. The specially developed Quick release hinges, allow a very simple and quick installation as well as very easy cleaning. Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: The seat can easily be cleaned on place, but due to the quick release hinge, it can also be removed from the WC for cleaning. Use normal mild cleaning liquids (avoid liquids containing abrasives). In order to avoid damages to the surface, avoid solvents like thinners and acetone. Art.no. Orig. num. Description Unit Pack Toilet seat White PCS 10* Toilet seats Ideal Adjustable hinges. Easy to remove. The seat can easily be cleaned. Material: Propene plastic. Specially designed to fit: Gustavsberg: Classic, Skandic and Nordic. IFÖ: Ceranova, Cera, City and Aqua. IDO: Evita, Trevi and Aniara. Art.no. Orig. num. Description Measure, c/c Unit Pack Toilet seat White 8,5-17,5 cm PCS 5* Toilet seats, handicap Toilet seat for hospitals Kan This WC seats are specially made for public toilets, hospitals etc. The seat and the raise are designed for people with an eye disease or other situations where you need a contrast in a white bathroom. To many people the sitting of a standard toilet bowl is too low and uncomfortable. The Kan raised WC seats offer a simple solution to that problem. Universal design, fits most WC s. : Body made in wood chips, covered with glass fibre reinforced polyester. The surface is enamelled with polyurethane. This varnish is resistant to many chemicals. The hinges are made in durable polyamide. Mounting instructions: The seat can be mounted on WC s with centre spacing mm. Forward and backward the seat can be adjusted approx. 20 mm. Easy to mount, without tools. Care instructions: The seat can easily be cleaned on place, but due to the quick release hinge, it can also be removed from the WC for cleaning. Use normal mild cleaning liquids (avoid liquids containing abrasives). In order to avoid damages to the surface, avoid solvents like thinners and acetone. Art.no. Orig. num. Description seat raising Height Unit Pack Toilet seat without lid Red - - PCS 6* Toilet seat with lid Red - - PCS 6* Raising Red White 50 mm PCS Raising Red White 75 mm PCS Raising Red White 100 mm PCS Raising Red White 125 mm PCS 1 Bathroom accessories Birch cherry coloured 9 743

30 9 Bathroom accessories Shower sets/accessories Hand-shower set/shower handle Galaxy Mars Anti calcium function. Warranty 2 years. Spray position Normal Air Massage, jet Normal + Air Normal + Massage Soft Soft + Air X X X Art.no. Description Measure, lxw Measure c/c Unit Pack Hand-shower set White 635 mm 590 mm PCS Hand-shower set Chrome 635 mm 590 mm PCS Shower handle White 225x75 mm - PCS Shower handle Chrome 225x75 mm - PCS 1 Hand-shower set Galaxy Meteor Anti calcium function. Warranty 2 years. Spray position Normal Air Massage, jet Normal + Air Normal + Massage Soft Soft + Air X Art.no. Description Length Measure c/c Unit Pack Hand-shower set Chrome 635 mm 590 mm PCS 1 Hand-shower set/shower handle Galaxy Pluto Anti calcium function. Warranty 2 years. Spray position Normal Air Massage, jet Normal + Air Normal + Massage Soft Soft + Air X Art.no. Description Measure, lxw Measure c/c Unit Pack Hand-shower set White 635 mm 590 mm PCS Hand-shower set Chrome 635 mm 590 mm PCS Shower handle White 225x75 mm - PCS Shower handle Chrome 225x75 mm - PCS 1 Metal Shower hose Galaxy Super strong. Warranty 2 years. Art.no. Description Length Unit Pack Shower hose Metal Metal Chrome 1.5 m PCS Shower hose Metal Metal Chrome 2,0 m PCS Shower hose Wire Plastic White 1.5 m PCS Shower hose Wire Plastic White 2,0 m PCS Shower hose Double Reinforced plastic Silver/black 1.5 m PCS Shower hose Double Reinforced plastic Silver/black 2,0 m PCS Shower hose S strong Metal Chrome 1.5 m PCS Shower hose S strong Metal Chrome 2,0 m PCS 1 Shower rail Galaxy Art.no. Description Length Distance to wall Measure c/c Unit Pack Shower rail Chrome 630 mm 65 mm 600 mm PCS 1 Wall bracket Galaxy Fit handles for serie Galaxy. Art.no. Description Unit Pack Wall bracket Chrome PCS Wall bracket with spike Chrome PCS 1 744

31 Bathmats/Shower curtains Bathmats and Shower curtain Pictograms Decobad Mat: 100 % Cotton. Curtain: 100 % polyester. Art.no. Description Size Unit Pack Bathmat Navy blue 50x80 cm PCS 5* Bathmat Nature 50x80 cm PCS 5* Bathmat Royal blue 50x80 cm PCS 5* Shower curtain Navy blue 180x200 cm PCS 5* Shower curtain Royal blue 180x200 cm PCS 5* Bathmat Solid and Cotton Solid Decobad Solid: 100 % Acrylic. Cotton Solid: 100 % Cotton. Art.no. Description Size Unit Pack Bathmat Royal blue 55x90 cm PCS 5* Bathmat Blue 55x90 cm PCS 5* Bathmat Ecru 55x90 cm PCS 5* Bathmat Terra 55x90 cm PCS 5* Bathroom accessories Royal blue Royal blue Cotton Blue 9 Shower curtain Solid Decobad 100 % polyester. Art.no. Description Size Unit Pack Shower curtain White 180x200 cm PCS 5* Shower curtain Light blue 180x200 cm PCS 5* Shower curtain Navy blue 180x200 cm PCS 5* Shower curtain Ecru 180x200 cm PCS 5* Navy blue Shower curtain Double Decobad 100 % polyester. Art.no. Description Measure, wxh Unit Pack Shower curtain Navy blue 180x200 cm PCS 5* Shower curtain Green 180x200 cm PCS 5* Shower curtain St Tropez Decobad 100 % polyester. Art.no. Description Size Unit Pack Shower curtain White 180x200 cm PCS 5* Drying racks, wall Laundry drying rack TorkReda, wall mounting Intended for small laundry at home. Takes up to 7 metres laundry. Hinged, also with laundry. Two types are available. Through using brackets the laundry rack can be used in the balcony e.g. The frame is made of 13 mm steel tubes and the stay is made of 5 mm steel thread. The brackets are made of durable polystyrene. Finish: electrostatic powder coating with epoxy. Load maximum 30 kg. Two sizes: Torkreda 1, 1000x530 mm. Torkreda 2, 570x730 mm. Spare parts: Brackets. Art.no. Description Type of pack Unit Pack Torkreda 1 White Consumer pack PCS 10* Torkreda 2 White Consumer pack PCS 10* Torkreda 1 Silver Consumer pack PCS 10* Torkreda 2 Silver Consumer pack PCS 10* Torkreda 1 White Building pack PCS Torkreda 2 White Building pack PCS Brackets new mod White PAI Brackets new mod Silver PAI 1 Laundry drying rack RollDry The rack contains 5 lines of 4.2 metres each inside with an automatic rolling mechanism and a lock on its side. Holds 12 kg of wet washing. Easy to mount. Art.no. Description Number of lines Line length Width Unit Pack Laundry drying rack White 5 pcs 21 m 430 mm PCS 1 745

32 9 Bathroom accessories in public areas Bathroom accessories in public areas Bathroom cabinets Kungsör-Femett Bathroom cabinet Kungsör Favorit Specially constructed to suit both adults and children. Despite the extra height, the cabinet is easy to place in all types of bathrooms and toilets. May also be completed with an extra lower shelf if required. Sturdy frame made of galvanized steel. Finish with white, environmental friendly powder coating, easy to clean. The cabinet has sliding doors made of mirror glass and three moveable shelves made of sheet metal. Mounting: The cabinet s upper edge is mounted 1870 mm above the finished floor with only two fixing screws. The lighting is fastened on the cabinet s top side with two screws in pre-drilled holes. The electrical connection for lighting is mounted 1900 mm above finished floor. Electric outlet, 230 V, is moveable from right to left. Art.no. Orig. num. Description Width Depth Height Unit Pack Bathroom cabinet 640 mm 115 mm 600 mm PCS Undershelf 640 mm 115 mm 140 mm PCS 1 Bathroom cabinet Kungsör Classic Specially constructed for narrow rooms and available in two different heights. The sturdy construction and durable surface treatment provides a maximum practical function to a low cost. Sturdy frame of galvanized sheet with double sidewalls. Finish with white, environmental friendly powder coating, easy to clean. Adjustable mirror door with swing bar. Two moveable shelves made of sheet metal. Mounting: The cabinet s upper edge is mounted 1870 mm above finished floor with only two fixing screws. The lighting is fastened on the cabinet s top side with two screws in pre-drilled holes. The electrical connection for the lighting is mounted 1900 mm above finished floor. The electric outlet, 230 V is moveable from right to left. Art.no. Orig. num. Description Width Depth Height Unit Pack Bathroom cabinet 400 mm 115 mm 500 mm PCS Bathroom cabinet 400 mm 115 mm 600 mm PCS Undershelf 400 mm 115 mm 140 mm PCS 1 Hygiene cabinet Femett Ultra A very flexible hygiene system that efficiently may be adapted to different needs within the public hygiene environment. For the cabinets there are a number of different base plates for different combination of dispensers for soap and disinfection fluids, paper towels and rolls as well as drinking cups. Made of white, environmental friendly powder coating which makes them easy to keep clean. They are all equipped with cylinder locks. The cabinets are mounted with only four screws. 2 standard keys are included. Push function control. B = Cup. H = Towel. DP = Dispenser. Art.no. Description Orig. num. Width Depth Height B H DP Unit Pack Hygiene cabinet mm 150 mm 720 mm x x 1 pc PCS Hygiene cabinet mm 150 mm 720 mm x x 2 pcs PCS 1 Lighting Art.no. Orig. num. Description Width Electric outlet Unit Pack x15 W, fluorescent tube 525 mm No PCS x15 W, fluorescent tube 525 mm 230V, with earth fault breaker PCS x15 W, fluorescent tube 525 mm 230V PCS 1 Accessories Art.no. Orig. num. Description Fits Unit Pack Extra shelf Ultra PCS Lever control 140 mm Ultra PCS 1 Hygiene cabinet Femett Ultra Care A specially adapted version for disabled persons. Thanks to the extended construction, the hygiene cabinet may be mounted at a lower height giving better accessibility for people in wheelchairs. The tilted mirror makes it possible for both people standing up and people in wheelchair to use the mirror to the maximum. For the cabinets there are a number of different base plates for different combination of dispensers for soap and disinfection fluids, paper towels and rolls as well as drinking cups. Made of white, environmental friendly powder coating which makes them easy to keep clean. They are all equipped with cylinder locks. The cabinets are mounted with only four screws. 2 standard keys are included. Push function control. B = Cup. H = Towel. DP = Dispenser. Art.no. Orig. num. Width Depth Height B H DP Unit Pack mm 190 mm 840 mm x x 1 pc PCS mm 190 mm 840 mm x x 2 pcs PCS 1 Lighting Art.no. Orig. num. Armature Width Electric outlet Unit Pack x15 W, fluorescent tube 525 mm No PCS x15 W, fluorescent tube 525 mm 230V, with earth fault breaker PCS x15 W, fluorescent tube 525 mm 230V PCS 1 Accessories Art.no. Orig. num. Description Fits Unit Pack Extra shelf Ultra PCS Lever control 140 mm Ultra PCS 1 746

33 Bathroom accessories in public areas Hygiene cabinet Femett Sturdy frame of sheet steel. Finish with white, environmental friendly powder coating, easy to clean. All cabinet types are equipped with cylinder lock. 2 standard keys are included. The cabinets may be equipped with a number of different zinc-electroplated base plates for different combinations of accessories and dispensers for drinking cups, soap and disinfecting fluids along with paper towels and wiping rolls. There are also lighting and mirror doors in different applications. Hygiene cabinet in design for disabled people: The hygiene cabinets for disabled people are designed for maximum accessibility and flexibility. All built-in functions and controls are easy to access due to the extended cabinet allowing lower mounting height over the floor surface. For cases where the washbasin is extra deep or mounted with a distance, there are also a corresponding distance frame for the hygiene cabinet which increases the accessibility further. The fully tilted mirror makes it possible for both people standing up and people in wheelchair to use the mirror to the maximum The cabinet for disabled people is built according to the same principles as Femett Hygiene cabinet. All cabinets are equipped with a tearing assembly for rolls and a push control for soap dispenser , Hygiene cabinet with tilted mirror , Hygiene cabinet with extended tilted mirror. B = Cup. H = Towel. DP = Dispenser. Art.no. Orig. num. Width Depth Height B H DP Unit Pack mm 140 mm 640 mm x x 1 pc PCS mm 140 mm 640 mm - x 2 pcs PCS mm 175 mm 640 mm x x 1 pc PCS mm 175 mm 810 mm x x 1 pc PCS mm 175 mm 810 mm - x 2 pcs PCS 1 Accessories Art.no. Orig. num. Description Height Unit Pack Shelf with 2 levels PCS 1 Lightings to Hygiene cabinet Femett The electric outlet is moveable from right to left. Art.no. Orig. num. Armature Lamp Electric outlet B/d/h Unit Pack x15W Fluorescent tube No 475/250/68 mm PCS x15W Fluorescent tube 230V with earth fault breaker 475/250/68 mm PCS x15W Fluorescent tube 230V 475/250/68 mm PCS x40W Incandescent lamp No 475/250/68 mm PCS 1 Hygiene cabinet Flexett Several functions in one unit for limited rooms. The cabinets are made of 0,75 mm sheet steel, phosphated and baking varnished in white. Equipped with cylinder lock. 2 standard keys are included. For the cabinets there are a number of different base plates for different combinations of accessories and dispensers for drinking cups, soap and disinfection fluids, paper towels and rolls. B = Cup. H = Towel. DP = Dispenser. AR = Lever control. Art.no. Orig. num. Height Width B H DP AR Unit Pack mm 380 mm - x Refill x PCS mm 475 mm x x Refill x PCS mm 380 mm x x - - PCS mm 475 mm - x 2xRefill x PCS 1 Accessories Femett/Ultra Spare automat Femett/Ultra for old types of hygiene cabinets Femett this type of soap automat is intended for hygiene cabinets Femett and Ultra. Art.no. Orig. num. Description Fits Unit Pack Spare automat 101 Hygiene cabinet older model/femett PCS Dispenso 103 Hygiene cabinet/femett Ultra PCS 1 Accessories Art.no. Orig. num. Description Fits Unit Pack Pump Dispenso 103 PCS 1 Brush band Femett/Ultra Art.no. Orig. num. Description Fits Unit Pack Brush band Tumbler, 12 cl PCS 1 Lock complete Femett/Ultra Art.no. Orig. num. Description Fits Unit Pack Lock, complete Hygiene cabinet Femett PCS Key Hygiene cabinet Femett/Ultra PCS 1 9 Shelf Femett/Ultra Art.no. Orig. num. Description Depth Unit Pack Shelf with 2 levels 140 mm PCS 1 Pump Femett/Ultra Art.no. Orig. num. Description Fits Unit Pack Pump Dispenso 350/600 PCS Pump 3MP Dispenso Bubblan PCS Valve housing/pump Dispenso 101 PCS 1 747

34 9 Bathroom accessories in public areas Wall attachment Dispenso 600 Art.no. Orig. num. Description Fits Unit Pack Wall attachment with lever control Dispenso 600 PCS 1 Bathroom cabinets Towel cabinet M 300 Epoxy coated steel. Art.no. Description Measure Contents Unit Pack Towel cabinet with lock 275x105x350 mm - PCS 64* Towel cabinet with snap locking 275x105x350 mm - PCS Key - 10 pcs PAC 1 Soap dispensers Soap dispenser Dispenso 350 This dispenser, is intended for the health-care sector, food industry and pharmaceutical industry. Effective in working environments with high hygiene requirements. Delivered without dosing lever. The bottle is made of chemical resistant plastic, volume 0,6 litre. The wire basket and attachment are made of stainless steel. The most important advantages: Easy to handle, drop-free operation, easy to fill. Art.no. Orig. num. Description Text, labels Unit Pack Dispenser White SOAP, DISINFECTION PCS 10* Dispenser Blue SOAP, DISINFECTION PCS 10* Accessories Art.no. Orig. num. Description Text, labels Unit Pack Bottle, blue with labels SOAP, DISINFECTION PCS Bottle, white with labels SOAP, DISINFECTION PCS Pump to disp. 350/600 PCS 1 Soap dispenser Dispenso 600 This dispenser, is intended for the health-care sector, food industry and pharmaceutical industry. Effective in working environments with high hygiene requirements. Delivered with dosing lever. The bottle is made of chemical resistant plastic, volume 0,6 litre. The wire basket and attachment are made of stainless steel. The most important advantages: Easy to handle, drop-free operation, easy to fill. Art.no. Orig. num. Description Text, labels Unit Pack Dispenser, complete Blue SOAP, DISINFECTION PCS 10* Dispenser White SOAP, DISINFECTION PCS 10* Accessories Art.no. Orig. num. Description Text, labels Unit Pack Bottle, blue with labels SOAP, DISINFECTION PCS Bottle, white with labels SOAP, DISINFECTION PCS Pump to disp. 350/600 PCS Wall bracket with lever PCS 1 Soap dispenser Dispenso 73-R, 83-R Intended for tough environment with wear, in schools, work shops e.g. The dispenser, made of stainless steel, volume 0,9 litre. Only thinly liquid soap should be used. Art.no. Orig. num. Description Note Unit Pack Soap-/Disinfection automat PCS Soap-/Disinfection automat Lockable PCS 1 Soap dispenser Dispenso 101 with lever Intended for showers and toilets on hotels, offices e.g. The dispenser, volume 0,6 litre, can be used to all types of soap, sprit and lotions. Delivered with dosing lever. The most important advantages: Easy mounting, precise dosing, drop-free operation, easy to fill. Art.no. Orig. num. Description Text, labels Unit Pack Soap-/Disinfection automat SOAP, DISINFECTION PCS 1 Accessories Art.no. Orig. num. Description Fits Unit Pack Pump Dispenso 103 PCS 1 748

35 Bathroom accessories in public areas Soap dispenser Dispenso Bubblan Practical dispenser in classic design with blue or white dispenser made of chemical resistant plastic. Wall bracket made of white plastic. Volume 0,4 litre and fits easily into smaller spaces. The dosing pump 3MP has only three moving parts and has precise dosing. Maintenance-free operation. For dosing everything from thin liquids to different lotions. Drop-free operation. The dosing pump causes no back suction and empties the packaging to the last drop. Art.no. Orig. num. Description Text Unit Pack Soap dispenser Blue - PCS Soap dispenser Blue SOAP PCS Disinfection automat White DISINFECTION PCS 10* Soap-/Disinfection automat White - PCS 10* Accessories Art.no. Orig. num. Description Fits Unit Pack Dosing pump Dispenso Bubblan PCS 1 Tork Soap system Soap TORK Premium S1 Premium soap S1: Liquid soap/shower soap for everyday washing needs. Lathers in both salt and fresh water. Lightly parfumed. Premium soap extra mild S1: Extra mild and conditioning liquid soap designed for frequent use. Suitable within the food industry and health-care sector. Contains no pigments or parfume. Premium industrial soap S1: Industrial soap for heavy cleansing. Effectively removes oils, fats, salt and sugar solutions, etc. Despite its efficacy, is lenient on skin - does not cause wear and tear of skin or dry skin out. Wash hands afterwards with normal soap. Premium shower soap S1: Liquid soap which functions equally good as a shampoo or shower soap. No Swan-label. Premium soap exclusive S1: Liquid soap "Luxury" with a light parfume. Art.no. Orig. num. Description Contents Unit Pack Soap S1 1 litre BOT Soap S1 5 litre CON 3* Soap extra mild S1 1 litre BOT Industrial soap S1 1 litre BOT Shower soap S1 1 litre BOT Soap exclusive S1 1 litre BOT 6 Dispenser soap TORK S1 Use with Tork Premium soap (1 litre). Reliable dispensing system for all hygeine areas including wash-rooms, showers, kitchens and health-care environments. Art.no. Orig. num. Description HxWxD Unit Pack Dispenser S1 White 289x112x105 mm PCS 12* Dispenser S1 Quarts blue 289x112x105 mm PCS 12* 9 Soap Mini TORK Premium S2 Premium soap Mini S2: Liquid soap for all normal washing needs. Lathers in both fresh and salt water. Lightly parfumed. Works even as a shower soap. Premium shower soap Mini S2: Liquid soap which works equally good as a shampoo as a shower soap. Has a low ph value (5) and can be used every day. No Swan-label! Art.no. Orig. num. Description Contents Unit Pack Soap Yellow 0,5 litre BOT Shower soap Blue 0,5 litre BOT 8 Dispenser soap TORK S1, metal Durable box for one litre Tork Premium soap products. Zinc treated metal surface with oven tempered epoxy finish. For use in tough environments. When refilled, the entire container is changed. Art.no. Orig. num. Description Material HxWxD Unit Pack Dispenser S1 Metal White 279x115x98 mm PCS 10* Dispenser S1 Stainless steel Steel grey 279x115x98 mm PCS 10* Dispenser soap TORK Mini S2 Use with Tork Premium soap (0,5 litre). A solution for hygiene areas with less usage or limited space. Has a design which is specially suited for hotel rooms. Art.no. Orig. num. Description HxWxD Unit Pack Dispenser S2 White 188x112x105 mm PCS 12* Dispenser S2 Quarts blue 188x112x105 mm PCS 12* 749

36 9 Bathroom accessories in public areas Soap baskets Soap basket B 15C For wall mounting. Bright chromed iron wire. Art.no. Description Measure, wxhxd Unit Pack Soap basket 135x35x95 mm PCS 25* Soap- /brush basket B 30C For wall mounting. Bright chromed iron wire. Art.no. Description Measure, wxhxd Unit Pack Soap- /brush basket 305x160x140 mm PCS 1 Waste paper bins Waste paper bin Steel wire, epoxy lacquered, white. Recommended refuse liner bags: Art. no Art.no. Description Height Width Depth Unit Pack Waste paper bin 355 mm 320 mm 240 mm PCS 10* Hand towel baskets Hand towel basket Steel wire, epoxy lacquered, white. Contains ca 150 pcs hand towels. Art.no. Description Height Width Depth Unit Pack Hand towel basket 170 mm 294 mm 117 mm PCS 6* Sanitary towel holders TORK Waste Paper Holder B3 Chromium-plated metal with lid. For plastic sanitation bags. Art.no. Orig. num. Description Measure WxD Unit Pack Waste Paper holder for sanitation bags 165x175 mm PCS 5* Accessories Art.no. Description Thickness Height Width Contents Unit Pack Waste Paper 0,03 mm Black 400 mm 180/140 mm 50 pcs PAC 20 Sanitary refuse sack Made of polyethene plastic. Suitable for all sanitary paper holders. Art.no. Description Thickness Height Width Contents Unit Pack Refuse sack 0,03 mm Black 400 mm 180/140 mm 50 pcs PAC 20 Toilet armrests Toilet armrest Optima L Etac Optima L has a round finishing which secures the support when standing up or sitting down. The small wall attachment facilitates mounting, since it only requires very little wall space. The supporting leg relieves the strain on the wall. Length of armrest Height from floor Wall bracket, width cc Wall bracket, height cc Material, wall mounting, support rail and supporting leg Material, locking mechanism Max user weight 735 mm 800 mm 78 mm 82 mm Powder coated tubular steel Polypropylene 150 kg Art.no. Description Weight Unit Pack Toilet armrest White/grey 3,1 kg PCS Toilet roll holder White PCS 1 750

37 Toilet armrest Optima 4, lockable Etac This armrest locks in folded position to enable the user to obtain support when standing up. The unique locking mechanism can be operated with one hand. A supporting leg can be fitted to relieve the strain on the wall. Wall armrest 71,5 cm Wall bracket 16,5x30,4 cm Floor armrest 80 cm Floor armrest folded up 147,5 cm Material, wall bracket Powder-coated aluminium Material, support rail and supporting leg Powder-coated tubular steel Armrest cover Polypropylene Art.no. Description Weight Unit Pack Toilet armrest 2,4 kg PCS 2* Toilet roll holder PCS 1 Hoses Chemical hoses Hoses 9 Allround hose 2,0 MPa Description: Allround hose for chemicals, wearing products, air pressure and water. Chemical, petrochemical, aggressive and corrosive products. s, paste, ink and solvents. Transport of wearing products. Perfect for vacuum. Design: Veneer: PEE elastomer. Inner tube: Elastomer. Reinforcement: Polyester fibre. Cover: Elastomer. Max working pressure 2,0 MPa Max negative pressure 50% Smooth Black Branding Technobel C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Bending radius Weight Unit Pack mm 14 mm 62 mm 0,13 kg/m mm 16 mm 75 mm 0,16 kg/m mm 19,5 mm 90 mm 0,22 kg/m 50 Solvent hose 2 MPa, EPDM, grey Description: A universal hose suitable as air pressure hose and water hose, resistant against many chemicals, Oil mist etc. Excellent weather resistance. Design: Inner tube: EPDM. Reinforcement: Synthetic textile. Cover: EPDM. Max working pressure 2,0 MPa Smooth Grey Electrical properties Antistatic C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Bending radius Weight Unit Pack mm 14 mm 50 mm 0,20 kg/m mm 18 mm 70 mm 0,26 kg/m mm 22 mm 90 mm 0,35 kg/m mm 30 mm 165 mm 0,66 kg/m mm 36 mm 225 mm 0,73 kg/m

38 9 Hoses Oil and petrol hoses Laboratory hose, PVC Unreinforced Description: Unreinforced, transparent hose for laboratories, foods and medical industry. Food quality. Resistant to common chemicals. Not resistant to oil and petrol. Design: Hose: PVC, food quality. Branding Smooth Transparent C TUBCLAIR AL Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 4 mm 0,5 MPa 15 mm 0,01 kg/m mm 5 mm 0,5 MPa 15 mm 0,02 kg/m mm 5 mm 0,5 MPa 22 mm 0,01 kg/m mm 6 mm 0,5 MPa 22 mm 0,03 kg/m mm 6 mm 0,5 MPa 35 mm 0,02 kg/m mm 7 mm 0,5 MPa 35 mm 0,03 kg/m mm 7 mm 0,5 MPa 40 mm 0,02 kg/m mm 8 mm 0,5 MPa 40 mm 0,04 kg/m mm 8 mm 0,5 MPa 60 mm 0,02 kg/m mm 9 mm 0,5 MPa 60 mm 0,04 kg/m mm 10 mm 0,5 MPa 60 mm 0,06 kg/m mm 12 mm 0,5 MPa 60 mm 0,10 kg/m mm 10 mm 0,5 MPa 65 mm 0,05 kg/m mm 10 mm 0,5 MPa 70 mm 0.05 kg/m mm 11 mm 0,5 MPa 85 mm 0,05 kg/m mm 12 mm 0,5 MPa 85 mm 0,07 kg/m mm 12 mm 0,5 MPa 105 mm 0,06 kg/m mm 13 mm 0,5 MPa 105 mm 0,09 kg/m mm 13 mm 0,5 MPa 110 mm 0,10 kg/m mm 14 mm 0,5 MPa 110 mm 0,09 kg/m mm 16 mm 0,5 MPa 110 mm 0,14 kg/m mm 15 mm 0,5 MPa 160 mm 0,07 kg/m mm 16 mm 0,5 MPa 160 mm 0,11 kg/m mm 18 mm 0,5 MPa 160 mm 0,17 kg/m mm 17 mm 0,5 MPa 160 mm 0,17 kg/m mm 18 mm 0,5 MPa 160 mm 0,12 kg/m mm 19 mm 0,5 MPa 205 mm 0,13 kg/m mm 20 mm 0,5 MPa 205 mm 0,17 kg/m mm 20 mm 0,5 MPa 210 mm 0,13 kg/m mm 21 mm 0,5 MPa 210 mm 0,17 kg/m mm 22 mm 0,5 MPa 230 mm 0,22 kg/m mm 22 mm 0,5 MPa 220 mm 0,15 kg/m mm 23 mm 0,5 MPa 230 mm 0,19 kg/m mm 24 mm 0,5 MPa 230 mm 0,23 kg/m mm 24 mm 0,5 MPa 260 mm 0,20 kg/m mm 25 mm 0,5 MPa 260 mm 0,26 kg/m mm 24 mm 0,5 MPa 240 mm 0,16 kg/m mm 26 mm 0,4 MPa 240 mm 0,25 kg/m mm 28 mm 0,4 MPa 270 mm 0,28 kg/m mm 31 mm 0,3 MPa 310 mm 0,32 kg/m mm 32 mm 0,3 MPa 325 mm 0,38 kg/m mm 33 mm 0,3 MPa 330 mm 0,33 kg/m mm 37 mm 0,3 MPa 360 mm 0,43 kg/m mm 38 mm 0,3 MPa 380 mm 0,51 kg/m mm 40 mm 0,3 MPa 390 mm 0,55 kg/m mm 42 mm 0,3 MPa 450 mm 0,71 kg/m mm 45 mm 0,3 MPa 420 mm 0,69 kg/m mm 48 mm 0,3 MPa 475 mm 0,79 kg/m mm 49 mm 0,3 MPa 520 mm 0,76 kg/m mm 60 mm 0,2 MPa 700 mm 1,05 kg/m mm 70 mm 0,2 MPa 940 mm 1,23 kg/m 25 Silicon hose unreinforced Description: The hose is intended for a coffee machine, beverage machine etc. The silicon withstands sterilization and boiling water. The silicon is free from taste and smell. Design: Inner tube: Transparent silicon rubber. Smooth Transparent C Safety Factor 4:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 9 mm 0,5 MPa 60 mm 0,05 kg/m

39 Oil hose 2,0 MPa Description: Light and flexible hose for oil and petrol (also lead-free petrol). A universal hose for oil, grease and petrol. Return line hose in hydraulic systems and for farming equipment. Design: Inner tube: Nitrile. Reinforcement: Synthetic textile. Cover: Nitrile/EPDM. Max working pressure 2,0 MPa Smooth Black C Safety Factor 4:1 Electrical properties Conducting Art.no. Inner Ø Outer Ø Bending radius Weight Unit Pack mm 11 mm 40 mm 0,11 kg/m mm 13 mm 45 mm 0,13 kg/m mm 14 mm 55 mm 0,15 kg/m mm 17 mm 70 mm 0,21 kg/m mm 22 mm 90 mm 0,33 kg/m mm 25 mm 110 mm 0,42 kg/m mm 30 mm 140 mm 0,54 kg/m mm 36 mm 170 mm 0,73 kg/m 50 Hoses 9 Petrol and oil resistant hose PVC unreinforced Description: Unreinforced PVC hose for petrol, oil and light chemicals. Design: Inner tube: PVC. Carton package. Smooth Blue transparent C Art.no. Inner Ø Outer Ø Working pressure Unit Pack mm 8 mm 0,3 MPa mm 8 mm 0,3 MPa mm 9 mm 0,3 MPa mm 10 mm 0,3 MPa mm 12 mm 0,3 MPa mm 12 mm 0,3 MPa mm 14 mm 0,3 MPa mm 16 mm 0,2 MPa 25 Petrol hose 1,3 MPa textile braided Description: Light and flexible hose for transfer of petrol and diesel. Design: Inner tube: NBR. Reinforcement: Textile braided. Braided Black C Safety Factor 4:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack ,0 mm 7,0 mm 1,3 MPa 15 mm 0,05 kg/m ,5 mm 7,5 mm 1,3 MPa 20 mm 0,06 kg/m 25 Petrol hose 1,0 MPa, delivered on bobbins Description: Light and flexible hose for transfer of petrol (leaded and unleaded) and diesel. Design: Inner tube: Nitrile. Reinforcement: Polyester. Cover: Nitrile. Smooth Black Branding HYDRO ECO C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack ,0 mm 14 mm 1,0 MPa 52 mm 0,14 kg/m ,0 mm 17 mm 1,0 MPa 62 mm 0,20 kg/m

40 9 Hoses Welding hoses Welding hose 2,0 MPa, EN 559 Description: Flexible and light weight for easy handling. A hose for all kind of welding. Approved according to EN 559.fD Design: Inner tube: Synthetic rubber with ignition temperature and low diffusion. Reinforcement: Synthetic textile. Cover: Synthetic wearing and weather resistant rubber. Ribbed Red for acetylene, blue for oxygen C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Note Unit Pack mm 12 mm 2,0 MPa 50 mm 0,16 kg/m Red mm 12 mm 2,0 MPa 50 mm 0,16 kg/m Blue mm 13 mm 2,0 MPa 65 mm 0,17 kg/m Red mm 13 mm 2,0 MPa 65 mm 0,17 kg/m Blue mm 13 mm 2,0 MPa 65 mm 0,17 kg/m Blue mm 15 mm 2,0 MPa 80 mm 0,41 kg/m Red mm 15 mm 2,0 MPa 80 mm 0,41 kg/m Blue mm 17 mm 2,0 MPa 100 mm 0,48 kg/m Red mm 17 mm 2,0 MPa 100 mm 0,48 kg/m Blue 50 Welding hose 2,0 Mpa, twin, EN 559 Description: Twin line rubber hose. Flexible and light weight for easy handling. A hose for all kind of welding. Approved according to EN 559.fD Design: Inner tube: Synthetic rubber with ignition temperature and low diffusion. Reinforcement: Synthetic textile. Cover: Synthetic wearing and weather resistant rubber. Twin, smooth Red for acetylene, blue for oxygen C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 12 mm 2,0 MPa 60 mm 0,34 kg/m mm 13 mm 2,0 MPa 75 mm 0,38 kg/m mm 15 mm 2,0 MPa 100 mm 0,42 kg/m mm 17 mm 2,0 MPa 140 mm 0,52 kg/m 50 Hose for liquefied petrolium gas, LPG, 1,2 MPa, EN 559 Description: Flexible hose for transporting LPG for LPG driven kitchens, lamps, refrigerators and blowpipes in laboratories and industries. Good resistance against propane, butane etc. Approved according to EN 559.fD Design: Inner tube: Nitrile. Reinforcement: Synthetic textile. Cover: NR/SBR. Smooth Orange C Safety Factor 5:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 12 mm 1,2 MPa 15 mm 0,15 kg/m mm 13 mm 1,2 MPa 20 mm 0,17 kg/m mm 13 mm 1,2 MPa 20 mm 0,17 kg/m mm 15 mm 1,2 MPa 25 mm 0,20 kg/m mm 17 mm 1,2 MPa 40 mm 0,24 kg/m 50 Breathing hose 2,0 Mpa, EN 139, antistatic Description: Light, kink resistant and flexible for fresh air breathing masks, blasting, paint spray guns etc. The hose is odourless and tasteless. Approved according to FDA and EN 139. Supply line for fresh breathing masks and compressed air supply. Design: Veneer: PVC. Inner tube: PVC. Reinforcement: Polyester fibre. Cover: PVC. Smooth Blue C Safety Factor 4:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 16 mm 2,0 MPa 33 mm 0,15 kg/m

41 Air pressure hoses Air pressure hose 1,0 MPa Description: Light and smooth hose for air pressure units and tools, used within mechanical, mining and building/construction industry. Also suitable for water. Oil mist resistant. Approved according to SIS type B.fD Design: Inner tube: Synthetic rubber resistant against oil mist. Reinforcement: Synthetic textile. Cover: Synthetic wearing and weather resistant rubber. Smooth until 25 mm, the other woven fabric Black C Safety Factor 5:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 13 mm 1,0 MPa 35 mm 0,14 kg/m mm 14 mm 1,0 MPa 40 mm 0,17 kg/m mm 17 mm 1,0 MPa 50 mm 0,22 kg/m mm 21 mm 1,0 MPa 65 mm 0,30 kg/m mm 30 mm 1,0 MPa 100 mm 0,56 kg/m mm 35 mm 1,0 MPa 125 mm 0,69 kg/m mm 45 mm 1,0 MPa 155 mm 1,12 kg/m 50 Hoses 9 Air pressure hose PVC 1,0 MPa Description: Light flexible hose for compressed air driven handtools, pneumatic equipment and water. Suitable for in-door use. Design: Inner tube: Transparent PVC. Reinforcement: Polyester fibre. Cover: Transparent PVC. Smooth Transparent C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 10 mm 1,0 MPa 18 mm 0,07 kg/m mm 11 mm 1,0 MPa 25 mm 0,08 kg/m mm 13 mm 1,0 MPa 35 mm 0,10 kg/m mm 13 mm 1,0 MPa 35 mm 0,10 kg/m mm 15 mm 1,0 MPa 45 mm 0,12 kg/m mm 15 mm 1,0 MPa 45 mm 0,12 kg/m mm 18 mm 1,0 MPa 65 mm 0,17 kg/m mm 18 mm 1,0 MPa 65 mm 0,17 kg/m mm 22 mm 1,0 MPa 85 mm 0,22 kg/m mm 22 mm 1,0 MPa 85 mm 0,22 kg/m mm 26 mm 1,0 MPa 105 mm 0,30 kg/m mm 26 mm 1,0 MPa 105 mm 0,30 kg/m mm 33 mm 1,0 MPa 125 mm 0,44 kg/m mm 33 mm 1,0 MPa 125 mm 0,44 kg/m mm 33 mm 1,0 MPa 125 mm 0,44 kg/m mm 41 mm 1,0 MPa 164 mm 0,62 kg/m mm 41 mm 1,0 MPa 164 mm 0,62 kg/m mm 47 mm 1,0 MPa 346 mm 0,73 kg/m mm 60 mm 1,0 MPa 522 mm 1,15 kg/m 25 Air pressure hose PVC 1,5 MPa, Tricoclair Description: Light flexible hose for compressed air driven handtools, pneumatic equipment and water. Suitable for healthcare and food industry. Can be used as vacuum hose up to 25 mm. Dimension over 25 mm has a working pressure of 0,8 MPa. Design: Inner tube: Transparent PVC, food quality. Reinforcement: Polyester fibre. Cover: Transparent PVC. Smooth Transparent C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working Max negative Bending Weight Unit Pack pressure pressure radius mm 12 mm 1,5 MPa 70% 24 mm 0,11 kg/m mm 14 mm 1,5 MPa 70% 30 mm 0,13 kg/m mm 16 mm 1,5 MPa 70% 40 mm 0,15 kg/m mm 19 mm 1,5 MPa 70% 65 mm 0,21 kg/m mm 20 mm 1,5 MPa 70% 110 mm 0,23 kg/m mm 23 mm 1,5 MPa 70% 75 mm 0,30 kg/m mm 27 mm 1,5 MPa 70% 130 mm 0,36 kg/m mm 34 mm 1,5 MPa 70% 144 mm 0,54 kg/m mm 42 mm 0,8 MPa mm 0,75 kg/m mm 48 mm 0,8 MPa mm 0,87 kg/m mm 64 mm 0,8 MPa mm 1,48 kg/m

42 9 Hoses Air pressure hose 2,0 MPa Description: Light and smooth hose for air pressure units and tools, used within mechanical, mining and building/construction industry. Also suitable for water. Oil mist resistant. Approved according to SIS type B.fD Design: Inner tube: Synthetic rubber resistant to oil mist. Reinforcement: Synthetic textile. Cover: Synthetic wear and weather resistant rubber. Smooth Black C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 17 mm 2,0 MPa 90 mm 0,25 kg/m mm 17 mm 2,0 MPa 90 mm 0,25 kg/m mm 17 mm 2,0 MPa 90 mm 0,25 kg/m mm 23 mm 2,0 MPa 100 mm 0,40 kg/m mm 30 mm 2,0 MPa 175 mm 0,72 kg/m mm 30 mm 2,0 MPa 175 mm 0,72 kg/m mm 35 mm 2,0 MPa 225 mm 0,86 kg/m 50 Air pressure hose 2,0 MPa, Yellow Description: Light and smooth hose for air pressure units and tools, used within mechanical, mining and building/construction industry. Also suitable for water. Oil mist resistant. Approved according to SIS type B.fD Design: Inner tube: Synthetic rubber resistant to oil mist. Reinforcement: Synthetic textile. Cover: Synthetic wear and weather resistant rubber. Smooth Yellow C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 17 mm 2,0 MPa 90 mm 0,25 kg/m mm 23 mm 2,0 MPa 100 mm 0,40 kg/m mm 30 mm 2,0 MPa 175 mm 0,72 kg/m mm 35 mm 2,0 MPa 225 mm 0,86 kg/m 40 Air pressure hose 2,5 MPa, oil resistant Description: Strong and robust hose for compressed air applications with high pressure. Used within mining and building/ construction industry. Also used as return line hose in hydraulic systems. Design: Inner tube: Synthetic oil resistant rubber. Reinforcement: Synthetic textile. Cover: Synthetic wear and weather resistant rubber. Smooth Black C Safety Factor 4:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 14 mm 2,8 MPa 64 mm 0,17 kg/m mm 15 mm 2,8 MPa 76 mm 0,17 kg/m mm 17 mm 2,8 MPa 76 mm 0,24 kg/m mm 21 mm 2,8 MPa 102 mm 0,28 kg/m mm 25 mm 2,1 MPa 152 mm 0,55 kg/m mm 35 mm 2,1 MPa 250 mm 0,71 kg/m 50 Air pressure hose PVC AC 1 MPa Description: Extremely light, flexible and thin wall hose pneumatic tools. Especially for indoor use. Design: Inner tube: PVC. Reinforcement: Polyester fibre. Cover: PVC. Smooth Blue C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Weight Unit Pack mm 9,0 mm 1,4 MPa 0,04 kg/m mm 11,5 mm 1,4 MPa 0,05 kg/m mm 13,5 mm 1,2 MPa 0,07 kg/m mm 16,0 mm 1,0 MPa 0,10 kg/m

43 Air pressure hose PVC 1,5 MPa, SE Description: Very light and flexible hose for compressors and pneumatic tools. Used within mechanical, mining and building/construction industry. Oil mist resistant. Small bending radius. Approved according to SIS type A and ISO fD Design: Inner tube: PVC. Reinforcement: Polyester fibre. Cover: PVC. Smooth Light blue C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 11 mm 1,5 MPa 22 mm 0,08 kg/m mm 13 mm 1,5 MPa 28 mm 0,11 kg/m mm 16 mm 1,5 MPa 45 mm 0,14 kg/m mm 19 mm 1,5 MPa 37 mm 0,20 kg/m mm 23 mm 1,5 MPa 56 mm 0,27 kg/m mm 27 mm 1,5 MPa 66 mm 0,34 kg/m mm 34 mm 1,5 MPa 88 mm 0,50 kg/m 50 Air pressure hose PU 2,0 MPa Description: Light and flexible hose for air pressure, petroleum products, paint, solvents, paste, inc and wearing products. Good chemical resistance, good flexibility and excellent for pressure. Design: Inner tube: PU, virgin, ester based. Reinforcement: Polyester fibre. Cover: PVC. Smooth Green Branding TECNOBEL PU dia 20/60 BAR logo kod C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 11 mm 2,0 MPa 20 mm 0,08 kg/m mm 14 mm 2,0 MPa 28 mm 0,13 kg/m mm 16 mm 2,0 MPa 32 mm 0,16 kg/m mm 19 mm 2,0 MPa 40 mm 0,20 kg/m mm 26 mm 2,0 MPa 70 mm 0,34 kg/m mm 33 mm 2,0 MPa 90 mm 0,46 kg/m 25 Hoses 9 Air pressure hose PVC 4,0 MPa Description: Light and flexible hose for air and water at high pressure. Ex; Self service car wash. The hose is excellent for agricultural spraying purpose. Design: Inner tube: PVC. Reinforcement: Polyester. Cover: PVC. Smooth Light blue Branding TRESS-NOBEL 40 bar C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 13 mm 4,0 MPa 19 mm 0,13 kg/m mm 15 mm 4,0 MPa 25 mm 0,15 kg/m mm 17 mm 4,0 MPa 45 mm 0,19 kg/m mm 20 mm 4,0 MPa 75 mm 0,26 kg/m mm 24 mm 4,0 MPa 95 mm 0,32 kg/m mm 35 mm 4,0 MPa 195 mm 0,58 kg/m 50 Pneumatic tubing PA DIN Description: Dimensional stable and flexible tube for pneumatic and hydraulic control. The tube is also excellent for use together with laboratory equipment, transfer of chemical products, fuel, grease, and steam (max temp 140 C). It can also be used as a mechanical support. Very good vacuum properties. Complies with DIN fD Design: Tube: Polyamide 11 (PA 11). Smooth inside and outside Blue or white Branding T 11 NOBEL every 30 cm C Safety Factor 4:1 Electrical properties Isolating Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Note Unit Pack mm 4 mm 3,3 MPa 48 mm 10,6 g/m ,7 mm 4 mm 1,8 MPa 60 mm 7,3 g/m mm 6 mm 2,0 MPa 72 mm 17,0 g/m mm 7 mm 1,6 MPa 84 mm 20,0 g/m White mm 8 mm 1,4 MPa 96 mm 24,0 g/m ,5 mm 10 mm 1,4 MPa 120 mm 36,0 g/m White mm 10 mm 1,1 MPa 120 mm 30,0 g/m mm 12 mm 0,9 MPa 144 mm 37,0 g/m

44 9 758 Hoses Industrial vacuum cleaning and Evacuation hoses Kitchen fan hose free from PVC Description: Extremely flexible ducting hose free from PVC. The hose is used for connecting the kitchen fan with the kitchen flue. The hose is constructed from a number of aluminium/polyester film layers with an imbedded spring steel helix. Certificate 0025.fD Design: Tube: 3 layer aluminium foil + 1 polyester film. Spiral: Steel spiral. Each length can be compressed axial 6:1. Kitchen fan hose PVC Description: Flexible ducting hose made of PVC-coated glass fibre cord highly resistant to tear. PVC-covered steel helix. The hose complies with the rule of fire resistant material. Approved for connecting kitchen fan with kitchen flue. The hose is certified and classified as fire resistant in Sweden. Certificate 0432.fD Design: Inner tube: PVC-coated glass fibre. Spiral: PVC-covered steel helix. Each length can be compressed axial 6:1. Flexible tube Description: Flexible and pliable aluminium tube. Compressible 3:1. Cutting by knife. Easily combined with tubes with cuffs in different lengths. Certificate 4151/86. Approved as connector between kitchen fan and kitchen flue. Please contact us for further details. Design: Inner tube: Corrugated aluminium. Suction hose PCV, L Description: Light, flexible ducting hose for air, smooke (also corrosive) gas, dust and small particles. The hose has a small bending radius. Design: Inner tube: PVC, smooth inside. Reinforcement: Rigid PVC-spiral. Corrugated Grey C Art.no. Inner Ø Working pressure Bending radius Weight Unit Pack mm 0,03 MPa 48 mm 0,19 kg/m mm 0,03 MPa 52 mm 0,20 kg/m mm 0,03 MPa 59 mm 0,23 kg/m mm 0,03 MPa 74 mm 0,33 kg/m mm 0,02 MPa 88 mm 0,41 kg/m mm 0,02 MPa 93 mm 0,43 kg/m 6 Corrugated Grey C Art.no. Inner Ø Working pressure Max negative pressure Bending radius Weight Unit Pack mm 0,08 MPa 0,02 MPa 25 mm 0,18 kg/m mm 0,07 MPa 0,02 MPa 84 mm 0,19 kg/m mm 0,06 MPa 0,01 MPa 32 mm 0,23 kg/m mm 0,06 MPa 0,01 MPa 38 mm 0,33 kg/m mm 0,04 MPa 0,008 MPa 44 mm 0,41 kg/m mm 0,04 MPa 0,006 MPa 50 mm 0,43 kg/m mm 0,03 MPa 0,005 MPa 52 mm 0,48 kg/m mm 0,02 MPa 0,004 MPa 57 mm 0,55 kg/m mm 0,01 MPa 0,003 MPa 70 mm 0,75 kg/m mm 0,01 MPa 0,001 MPa 83 mm 1,0 kg/m 6 Corrugated Aluminium up to +200 C Art.no. Inner Ø Length Note Unit Pack mm 3 m - PCS mm 3 m - PCS mm 3 m - PCS mm 1 m Muff/Muff PCS mm 1 m Muff/Muff PCS mm 1 m Muff/Muff PCS 1 Corrugated Blue -10 C C Art.no. Inner Ø Max negative pressure Bending radius Weight Unit Pack mm 50 % 20 mm 0,12 kg/m mm 40 % 25 mm 0,14 kg/m mm 40 % 32 mm 0,16 kg/m mm 40 % 38 mm 0,19 kg/m mm 40 % 50 mm 0,29 kg/m mm 30 % 60 mm 0,43 kg/m mm 30 % 63 mm 0,45 kg/m mm 30 % 76 mm 0,55 kg/m mm 30 % 80 mm 0,59 kg/m mm 25 % 90 mm 0,67 kg/m mm 25 % 102 mm 0,75 kg/m mm 25 % 127 mm 1,10 kg/m 30

45 Suction hose PCV, M Description: Medium, flexible ducting hose for air, smooke (also corrosive) gas, dust and small particles. Used for industrial vacuum cleaners and wood working machines. The hose has a small bending radius. Design: Inner tube: PVC, smooth inside. Reinforcement: Rigid PVC-spiral. Corrugated Grey -10 C C Art.no. Inner Ø Max negative pressure Bending radius Weight Unit Pack mm 80 % 20 mm 0,12 kg/m mm 80 % 25 mm 0,16 kg/m mm 80 % 30 mm 0,20 kg/m mm 80 % 32 mm 0,21 kg/m mm 80 % 38 mm 0,26 kg/m mm 80 % 40 mm 0,28 kg/m mm 80 % 50 mm 0,43 kg/m mm 70 % 63 mm 0,53 kg/m mm 70 % 76 mm 0,64 kg/m mm 70 % 80 mm 0,75 kg/m mm 55 % 90 mm 0,85 kg/m mm 55 % 100 mm 0,97 kg/m mm 55 % 110 mm 1,10 kg/m mm 50 % 120 mm 1,20 kg/m mm 50 % 125 mm 1,27 kg/m mm 50 % 150 mm 1,60 kg/m mm 40 % 160 mm 1,78 kg/m mm 40 % 180 mm 2,00 kg/m mm 40 % 200 mm 2,20 kg/m 10 Hoses 9 Suction hose PCV, HD Description: Heavy duty ducting hose for air, smooke (also corrosive) gas, dust and abrasive particles. Used for industrial vacuum cleaners and wood working machines. The hose has a small bending radius. Design: Inner tube: PVC, smooth inside. Reinforcement: Rigid PVC-spiral. Vacuum cleaner hose EVA Description: A very flexible hose for fume extraction, central vacuum cleaner and carpet cleaner. The hose is resistant to oil and chemicals. Resistant to abrasion and kinking, will bounce back to original shape after being crushed. Cold resistant. Design: Inner tube: EVA-plastic. Corrugated Black -15 C C Art.no. Inner Ø Max negative pressure Bending radius Weight Unit Pack mm 80 % 110 mm 0,28 kg mm 80 % 140 mm 0,37 kg mm 80 % 175 mm 0,55 kg 50 Corrugated Grey -50 C C Art.no. Inner Ø Outer Ø Working pressure Max negative pressure Bending radius Weight Unit Pack mm 40 mm 0,08 MPa 80 % 72 mm 0,27 kg/m mm 48 mm 0,08 MPa 80 % 85 mm 0,37 kg/m mm 55 mm 0,07 MPa 70 % 105 mm 0,45 kg/m mm 62 mm 0,07 MPa 70 % 115 mm 0,48 kg/m 30 Vacuum cleaner hose EVA, antistatic Description: A very flexible and antistatic hose for fume extraction, central vacuum cleaner and carpet cleaner. The hose is resistant to oil and chemicals. Cold resistant. Resistant to abrasion and kinking, will bounce back to original shape after being crushed. Design: Inner tube: Polyethylene, antistatic. Corrugated Black -50 C C Art.no. Inner Ø Outer Ø Working pressure Max negative pressure Bending radius Weight Unit Pack mm 41 mm 0,08 MPa 80 % 72 mm 0,27 kg/m mm 49 mm 0,08 MPa 80 % 85 mm 0,37 kg/m mm 62 mm 0,07 MPa 70 % 115 mm 0,48 kg/m

46 9 Hoses Suction hose PU, HD, steel spiral Description: A heavy duty hose in polyurethane. The hose is intended for very abrasive material as granules, wood chips, cement, grains, cereals, sugar etc. Polyurethane has good resistance to high and low temperature, oil and weather. Design: Inner tube: Polyurethane (PU). Spiral: spring steel. Corrugated Transparent -40 C C (Temporary +125 C) Art.no. Inner Ø Wall thickness Working Max negative Bending Weight Unit Pack pressure pressure radius mm 1,5 mm 0,18 MPa 40 % 75 mm 0,40 kg/m mm 1,5 mm 0,12 MPa 40 % 120 mm 0,70 kg/m mm 1,5 mm 0,10 MPa 30 % 150 mm 1,30 kg/m 10 Suction hose PU, L, steel spiral Description: A light and flexible hose in polyurethane. The hose is intended for very abrasive material as granules, chips, cement, seed, sugar, milk powder, meal etc. Also suitable for exhaust, steam within chemical and car industry. Polyurethane has good resistance to high and low temperature, oil and weather. Design: Inner tube: Polyurethane (PU). Spiral: spring steel. Corrugated Transparent -40 C C (Temporary +125 C) Safety Factor 3:1 Art.no. Inner Ø Wall Working Max negative Bending Weight Unit Pack thickness pressure pressure radius mm 0,7 mm 0,13 MPa 30% 50 mm 0,33 kg/m mm 0,7 mm 0,13 MPa 30% 60 mm 0,40 kg/m mm 0,7 mm 0,08 MPa 25% 76 mm 0,47 kg/m mm 0,7 mm 0,08 MPa 25% 90 mm 0,56 kg/m mm 0,7 mm 0,06 MPa 20% 102 mm 0,74 kg/m mm 0,7 mm 0,06 MPa 20% 127 mm 0,92 kg/m mm 0,7 mm 0,03 MPa 15% 152 mm 1,10 kg/m mm 0,7 mm 0,03 MPa 15% 160 mm 1,20 kg/m mm 0,7 mm 0,03 MPa 15% 203 mm 1,80 kg/m 10 Water and garden hoses Garden hose 1,0 MPa Description: A fluted garden hose, also for parks and sport arenas etc. Design: Inner tube: Synthetic rubber. Reinforcement: Synthetic textile. Cover: Synthetic weather resistant rubber. Ribbed Red -20 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 20 mm 1,0 MPa 65 mm 0,32 kg/m mm 23 mm 1,0 MPa 80 mm 0,38 kg/m mm 28 mm 1,0 MPa 100 mm 0,56 kg/m mm 34 mm 1,0 MPa 125 mm 0,72 kg/m 50 Garden hose PVC, knit. Description: A knitted PVC garden hose, also for, parks and sport arenas etc. High quality watering hose. Design: Inner tube: PVC. Reinforcement: Polyester fibre, knitting armed. Cover: PVC. Smooth Green -5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 18 mm 0,8 MPa 80 mm 0,15 kg/m mm 18 mm 0,8 MPa 80 mm 0,15 kg/m mm 26 mm 0,8 MPa 175 mm 0,27 kg/m mm 26 mm 0,8 MPa 175 mm 0,27 kg/m

47 Garden hose PVC, Tricoflex Description: A high quality knitted PVC garden hose, suitable also for industrial use. Flexible hose with very good wear and ageing properties. Design: Inner tube: PVC. Reinforcement: Polyester fibre, knitting reinforcement. Cover: PVC. Smooth Yellow -5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 17,5 mm 1,0 MPa 80 mm 0,15 kg/m mm 17,5 mm 1,0 MPa 80 mm 0,15 kg/m mm 25,5 mm 1,0 MPa 175 mm 0,27 kg/m mm 25,5 mm 1,0 MPa 175 mm 0,27 kg/m mm 32,5 mm 0,8 MPa 230 mm 0,43 kg/m mm 32,5 mm 0,8 MPa 230 mm 0,43 kg/m mm 39,0 mm 0,8 MPa 275 mm 0,62 kg/m mm 51,0 mm 0,8 MPa 500 mm 0,94 kg/m mm 63,0 mm 0,8 MPa 600 mm 1,37 kg/m 50 Garden hose Trico-ATS Revolution A high quality hose, pliable and flexible for easy handling. Kink resistant, the hose wouldn t twist under pressure. Design: Inner tube: PVC. Reinforcement: Polyester fibre, knitting reinforced. Cover: PVC. Smooth Yellow -5 C C Safety Factor 3:1 Branding Tricot ATS Revolution Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Pallet quantity Unit Pack mm 18 mm 1,0 MPa 80 mm 155 g/m 1650 m mm 25 mm 1,0 MPa 175 mm 290 g/m 875 m 25 Hoses 9 Garden hose Elastoflex Avantgarde Description: A garden hose of high quality. Flexible and cold flexible hose with very good wearing and ageing characteristics. Design: Inner tube: PVC. Reinforcement: Polyester fibre, knitting reinforcement. Cover: PVC. Smooth Yellow -5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Pallet quantity Unit Pack mm 18 mm 1,0 MPa 80 mm 155 g/m 1650 m mm 18 mm 1,0 MPa 80 mm 155 g/m 1800 m mm 25 mm 1,0 MPa 175 mm 290 g/m 875 m mm 25 mm 1,0 MPa 175 mm 290 g/m 900 m mm 33 mm 0,8 MPa 230 mm 410 g/m 400 m 25 Garden hose DAN-TRICO Elegance Description: High quality garden hose. Flexible hose for watering in gardens, parks etc. Design: Inner tube: PVC. Reinforcement: Polyester fibre, knitting reinforcement. Cover: PVC. Smooth Green -5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Pallet quantity Unit Pack mm 17 mm 0,8 MPa 80 mm 120 g/m 1440 m mm 17 mm 0,8 MPa 80 mm 120 g/m 1680 m mm 24 mm 0,8 MPa 175 mm 210 g/m 875 m mm 24 mm 0,8 MPa 175 mm 210 g/m 900 m 50 Garden hose JADE-LIGHT Basic Description: Light water hose for gardens, parks, sport arenas, ice tracks etc. Design: Inner tube: PVC. Reinforcement: Synthetic textile. Cover: PVC. Smooth Green/Black +5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Length Unit Pack mm 16 mm 0,7 MPa 65 mm 95 g/m 20 m PCS 176* mm 29 mm 0,8 MPa 60 mm 410 g/m 25 m

48 9 Hoses Sprinkler hose incl. couplings A hose for watering. Easily extendable through the system of connecting fittings. Can be cut to length. The three channels provide an even and economical watering. Produces a fine spray, protecting plants and eliminates earth erosion. Coverage: 50 m² (7,5 m x 6,6 m) for 7,5 m length, 100 m² (15 m x 6,6 m) for 15 m length. Design: Tube: PVC. Three separate channels Coupling tap end 1/2" quick coupling Coupling end 1/2" ext screw coupling with lid Green +5 C C Safety Factor 3:1 Art.no. Working pressure Weight Length Pallet quantity Unit Pack ,7 MPa 90 g/m 7.5 m 180 pcs PCS 10* ,7 MPa 90 g/m 15 m 180 pcs PCS 10* Industrial water hose 1,0 MPa Description: For high demands in durability and strength. Especially suitable within industry, construction sites and shipping. Also suitable as fire hose. Made according to SIS fD Design: Inner tube: Synthetic rubber. Reinforcement: Synthetic textile. Cover: Synthetic wearing and weather resistant rubber. Smooth until 25 mm, the other woven fabric Red -30 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Note Unit Pack ,0 MPa 100 mm 0,35 kg/m ,0 MPa 175 mm 0,56 kg/m ,0 MPa 175 mm 0,56 kg/m ,0 MPa 225 mm 0,71 kg/m ,0 MPa 320 mm 0,90 kg/m fabric ,0 MPa 380 mm 1,10 kg/m fabric ,0 MPa 510 mm 1,45 kg/m fabric ,0 MPa 760 mm 2,50 kg/m fabric 40 Drainage hose Description: A hose, ready to use with couplings and adjustable in one end, especially for washing machine. Design: Inner tube: Polyethylene. Couplings: Thermo plastic id 19 mm. Corrugated Grey -10 C C Art.no. Inner Ø Outer Ø Working pressure Bending radius Length Unit Pack mm 27 mm 0,01 MPa 40 mm 1.5 m PCS 1 Lay flat PVC hose Description: Light weight hose for lay flat for submersible pumps and as a trunk hose. Design: Inner tube: PVC. Reinforcement: Polyester fibre. Cover: PVC. Smooth Blue -5 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Working pressure Weight Unit Pack mm 28 mm 0,4 MPa 0,23 kg/m mm 35 mm 0,4 MPa 0,25 kg/m mm 55 mm 0,4 MPa 0,28 kg/m mm 43 mm 0,4 MPa 0,21 kg/m mm 55 mm 0,4 MPa 0,28 kg/m mm 66 mm 0,4 MPa 0,40 kg/m mm 79 mm 0,3 MPa 0,50 kg/m mm 106 mm 0,3 MPa 0,67 kg/m

49 Trunk hose PVC Description: Trunk hose for filling of concrete into the cast. The hose is weather resistant and will not be destroyed from outdoor storage. Withstands chemicals and temporary contact with petrol and oil. Lay flat. Design: Inner tube: PVC. Reinforcement: Polyester woven. Cover: PVC. Smooth Black 0 C C Safety Factor 3:1 Art.no. Inner Ø Outer Ø Weight Unit Pack mm 154 mm 1,00 kg/m mm 205 mm 1,50 kg/m mm 256 mm 2,50 kg/m mm 307 mm 4,00 kg/m 25 Coolant hose EPDM Description: A pliable and heat resistant hose for cooling systems. The hose is resistant to glycol and other chemicals. Design: Inner tube: Synthetic heat resistant rubber. Reinforcement: Synthetic textile. Cover: Synthetic ageing and ozone resistant rubber. Fabric Black -30 C C Safety Factor 4:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Note Unit Pack mm 27 mm 0,7 MPa 190 mm 0,53 kg/m fabric mm 30 mm 0,7 MPa 220 mm 0,60 kg/m fabric mm 33 mm 0,7 MPa 250 mm 0,65 kg/m fabric mm 36 mm 0,7 MPa 280 mm 0,72 kg/m fabric mm 40 mm 0,7 MPa 320 mm 0,81 kg/m fabric mm 43 mm 0,7 MPa 350 mm 0,87 kg/m fabric mm 46 mm 0,6 MPa 380 mm 0,94 kg/m fabric mm 48 mm 0,6 MPa 400 mm 0,97 kg/m fabric mm 53 mm 0,6 MPa 450 mm 1,07 kg/m fabric mm 56 mm 0,6 MPa 480 mm 1,15 kg/m fabric mm 59 mm 0,4 MPa 510 mm 1,21 kg/m fabric mm 62 mm 0,4 MPa 540 mm 1,27 kg/m fabric mm 97 mm 0,4 MPa 900 mm 2,26 kg/m fabric 1 Hoses 9 Car heater hose Description: A flexible and heat resistant hose for refrigerant in private cars, trucks and tractors etc. Design: Inner tube: Synthetic heat resistant rubber. Reinforcement: Synthetic textile. Cover: Synthetic, ageing and ozone resistant rubber. Smooth Black -40 C C Safety Factor 7,5:1 Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 20 mm 0,2 MPa 90 mm 0,25 kg/m mm 23 mm 0,2 MPa 120 mm 0,30 kg/m mm 27 mm 0,2 MPa 140 mm 0,41 kg/m 25 Steam hoses Washdown hose 0,7 MPa Description: Intended for hot water and cleaning liquids. Working pressure; 0,7 MPa for steam up to 170 C, 0,8 MPa for hot water up to 90 C, 2,0 MPa for cold water. Design: Inner tube: Synthetic white rubber. Reinforcement: Synthetic textile. Cover: Synthetic blue rubber. Fabric Inner white, Cover: blue -40 C C Burst pressure 7,0 MPa Art.no. Inner Ø Outer Ø Working pressure Bending radius Weight Unit Pack mm 23 mm 0,7 MPa 90 mm 0,40 kg/m mm 31 mm 0,7 MPa 130 mm 0,70 kg/m mm 39 mm 0,7 MPa 175 mm 1,10 kg/m

50 9 Couplings Couplings Hose connectors Claw coupling, nipple Description: A quick coupling for low and medium high pressure. Recommended maximum working pressure 0,7 MPa. Safety couplings with double locking. In accordance with DIN 3482 and 3483 (with 42 mm between the lugs). Material: Malleable iron, zinc plated. Gasket: Oil resistant rubber. Clamp: Two bolt clamp. Art.no. Description Hose Inner Ø Dimension Working pressure Unit Pack Claw coupling 6 mm 1/4" 0,7 MPa PCS 10* Claw coupling 8 mm 5/16" 0,7 MPa PCS 10* Claw coupling 10 mm 3/8" 0,7 MPa PCS 10* Claw coupling 13 mm 1/2" 0,7 MPa PCS 10* Claw coupling 16 mm 5/8" 0,7 MPa PCS 10* Claw coupling 19 mm 3/4" 0,7 MPa PCS 10* Claw coupling 25 mm 1" 0,7 MPa PCS 10* Claw coupling 32 mm 1 1/4" 0,7 MPa PCS 10* Claw coupling, female thread Description: A quick coupling for low and medium high pressure. Recommended maximum working pressure 0,7 MPa. Safety couplings with double locking. In accordance with DIN 3482 and 3483 (with 42 mm between the lugs). Material: Malleable iron, zinc plated. Gasket: Oil resistant rubber. Clamp: Two bolt clamp. Art.no. Description Dimension Working pressure Unit Pack Claw coupling R 1/4" 0,7 MPa PCS 10* Claw coupling R 3/8" 0,7 MPa PCS 10* Claw coupling R 1/2" 0,7 MPa PCS 10* Claw coupling R 3/4" 0,7 MPa PCS 10* Claw coupling R 1" 0,7 MPa PCS 10* Claw coupling R 1 1/4" 0,7 MPa PCS 10* Claw coupling, male thread Description: A quick coupling for low and medium high pressure. Recommended maximum working pressure 0,7 MPa. Safety couplings with double locking. In accordance with DIN 3482 and 3483 (with 42 mm between the lugs). Material: Malleable iron, zinc plated. Gasket: Oil resistant rubber. Clamp: Two bolt clamp. Art.no. Description Dimension Working pressure Unit Pack Claw coupling R 1/4" 0,7 MPa PCS 10* Claw coupling R 3/8" 0,7 MPa PCS 10* Claw coupling R 1/2" 0,7 MPa PCS 10* Claw coupling R 3/4" 0,7 MPa PCS 10* Claw coupling R 1" 0,7 MPa PCS 10* Claw coupling R 1 1/4" 0,7 MPa PCS 10* Claw coupling, end cap Description: A quick coupling for low and medium high pressure. Recommended maximum working pressure 0,7 MPa. Safety couplings with double locking. In accordance with DIN 3482 and 3483 (with 42 mm between the lugs). Material: Malleable iron, zinc plated. Gasket: Oil resistant rubber. Clamp: Two bolt clamp. Art.no. Description Working pressure Unit Pack Claw coupling with chain 0,7 MPa PCS 10* Claw coupling without chain 0,7 MPa PCS 10* Claw coupling, gasket A gasket intended for the quick coupling for low and medium high pressure. Recommended maximum working pressure 0,7 MPa. Art.no. Description Working pressure Unit Pack Gasket Oil resistant 0,7 MPa PCS 100* Gasket Steam resistant 0,7 MPa PCS 100* Y - branch Description: For connection of claw couplings. Material: Malleable iron, zinc plated. Art.no. Description Dimension Working pressure Unit Pack Y - branch R1" 0,7 MPa PCS 1 764

51 Hose mender Made of brass. Art.no. Description Hose Inner Ø Working pressure Unit Pack Hose mender 1/4"-1/4" 6 mm 0,7 MPa PCS 10* Hose mender 3/8"-3/8" 10 mm 0,7 MPa PCS 10* Hose mender 1/2"-1/2" 13 mm 0,7 MPa PCS 10* Hose mender 3/4"-3/4" 19 mm 0,7 MPa PCS 10* Hose mender 1"-1" 25 mm 0,7 MPa PCS 10* Water wash down gun incl nipple Description: Adjustable, from a large stream to mist. Delivered with connecting hose nipple with internal diameter 13 and 19 mm. Material: Rubber-coated brass with a plastic handle. : max. +95 C. Art.no. Orig. num. Hose Inner Ø Working pressure Unit Pack /19 mm 2,4 MPa PCS 1 Water wash down nozzle Lonn Water Saver Description: For water. The water will only pass through the unit when pressure is applied to the hose end, when you bend the nozzle. It will close automatically when the grip is off. Sturdy, concentrated stream. Length 220 mm. Material: Made of brass and a weather resistant rubber quality. Rubber gasket and with R3/4" female thread. Art.no. Orig. num. Description Dimension Working Unit Pack pressure Water wash down nozzle Lonn R3/4" int 1,0 MPa PCS 1 Couplings 9 Hose clamps Two bolt clamp Description: An robust clamp for even pressure. Recommended maximum working pressure 0,7 MPa. Material: Malleable iron, zinc plated. Art.no. Description Hose Inner d Hose Outer d Unit Pack Two bolt clamp 13 mm mm PCS 10* Two bolt clamp 19 mm mm PCS 10* Two bolt clamp 25 mm mm PCS 10* Two bolt clamp mm PCS 10* Two bolt clamp mm PCS 10* Two bolt clamp mm PCS 10* Two bolt clamp mm PCS 10* Two bolt clamp mm PCS 10* Hose Clamp ABA Original Alu-zinc S20 ABA Original clamps feature an extra strong one-piece pressed housing, rolled-up band edges and a smooth band underside that protects the hose. For added corrosion resistance the band in the ABA 12 mm Standard is made of Alu-zinc which gives three times the protection offered by conventional galvanized steel. ABA Original - the trouble-free clamp with high tightening force and highbreaking torque. Standard - S20. Screw: Electro zinc plated. Band: Alu-zinc. Housing: Painted. ABA s material choice is high quality, Swedish, Alu-zinc. Closest to W2 but since the screw is in carbon steel and the band is in chromium steel the time to red rust is lower for W2. Art.no. Hose size Band width Rec. tightening torque Unit Pack (15) mm 9 mm 2,5-3,5 PCS 50* (17) mm 9 mm 2,5-3,5 Nm PCS 50* (22) mm 9 mm 3-4 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* 765

52 9 Couplings Hose Clamp ABA Ultra Acid resistant S50 The acid resistant clamp is produced from SS 2343/AISI 316 high tensile strength steel. It has one of the best clamping force ratings in the world thanks to its special thread design and ABA s manufacturing methods. Whenever required this clamp has a very high clamping force and premium corrosion resistance. Every clamp is date stamped for traceability. This clamp has received high praise from US Powerboats, amongst others. Standard - S50. All parts in acid resistant steel /AISI 316/SS2343. Min. time to red rust is hours. Comparable to W5. Art.no. Hose size Band width Rec. tightening torque Unit Pack mm 9 mm 2,5-3,5 Nm PCS 50* mm 9 mm 2,5-3,5 Nm PCS 50* mm 9 mm 2,5-3 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 4-5 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* Hose Clamp ABA Mini Standard S10 / W 1 The ABA Mini is particularly suitable for use on small, thin-walled hoses. The band tongue that fits under the hose is profiled for added strength. The band tongue that fits under the hose is profiled for added strength. One piece without welding points. The nut is retained even if the screw is removed. 7 mm hexagonal head. Suitable hose clip screwdrivers art. no Electro zinc plated. Standard - S10 / W 1. Art.no. Size Del Min Band width Rec. tightening torque Unit Pack mm 6.5 mm 9 mm 1,5 Nm PCS 50* mm 7 mm 9 mm 1,5 Nm PCS 50* mm 8 mm 9 mm 1,5 Nm PCS 50* mm 9 mm 9 mm 1,5 Nm PCS 50* mm 9.5 mm 9 mm 1,5 Nm PCS 50* mm 10.5 mm 9 mm 1,5 Nm PCS 50* mm 11.5 mm 9 mm 1,5 Nm PCS 50* mm 12.5 mm 9 mm 1,5 Nm PCS 50* mm 13.5 mm 9 mm 1,5 Nm PCS 50* mm 15,5 mm 9 mm 1,5 Nm PCS 50* mm 16,5 mm 9 mm 1,5 Nm PCS 50* Hose Clamp ABA Mini Stainless S40 / W 4 All parts in stainless steel. Rolled-up band edges that are gentle on hoses, the band tongue that fits under the hose is profiled for added strength. The band is made in one piece without welding points. The nut is retained even if the screw is removed. The screw has hexagonal and Phillips head. Suitable hose clip screwdrivers art. no Stainless - S40/ W4. All parts in stainless steel /AISI 304/SS2333. Art.no. Size Del Min Band width Rec. tightening torque Unit Pack mm 7 mm 9 mm 1,5 Nm PCS 50* mm 8 mm 9 mm 1,5 Nm PCS 50* ,5 mm 9 mm 9 mm 1,5 Nm PCS 50* ,5 mm 9,5 mm 9 mm 1,5 Nm PCS 50* ,5mm 10,5 mm 9 mm 1,5 Nm PCS 50* ,5 mm 11,5 mm 9 mm 1,5 Nm PCS 50* ,5 mm 12,5 mm 9 mm 1,5 Nm PCS 50* ,5 mm 13,5 mm 9 mm 1,5 Nm PCS 50* ,5 mm 15,5 m 9 mm 1,5 Nm PCS 50* ,5 mm 16,5 mm 9 mm 1,5 Nm PCS 50* 766

53 Hose Clamp ABA Ultra W1 ABA Original clamps feature an extra strong one-piece pressed housing, rolled-up band edges and a smooth band underside that protects the hose. Standard is made of Alu-zinc which gives three times the protection offered by conventional galvanized steel. The tensile strength is minimum 600 N/mm². The screw has 7 mm hexagonal head. Suitable hose clip screwdrivers art. no Art.no. Hose size Band width Rec. tightening torque Unit Pack mm 9 mm 2-2,5 Nm PCS 50* mm 9 mm 2-2,5 Nm PCS 50* mm 9 mm 2-2,5 Nm PCS 50* mm 12 mm 2,5-3,5 Nm PCS 50* mm 12 mm 2,5-3,5 Nm PCS 50* mm 12 mm 2,5-3,5 Nm PCS 50* mm 12 mm 3,5-4,5 Nm PCS 50* mm 12 mm 3,5-4,5 Nm PCS 50* mm 12 mm 3,5-4,5 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* mm 12 mm 5-6 Nm PCS 50* Couplings 9 Clamp DIY Version: Galvanized or Acid resistant. Art.no. Description Hose size Contents Unit Pack Clamp DIY 8-14 mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY mm Galvanized 2 pcs PAC Clamp DIY 8-14 mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC Clamp DIY mm Acid resistant 2 pcs PAC 10 Clamp Mini DIY Galvanized. Fits petrol and compressed air hoses. Art.no. Description Hose size Contents Unit Pack Clamp Mini DIY 6-8 mm 2 pcs PAC Clamp Mini DIY 8-10 mm 2 pcs PAC Clamp Mini DIY 9-12 mm 2 pcs PAC Clamp Mini DIY mm 2 pcs PAC 10 Banding system ABA W2B An instant solution for clamping. The ABA Banding System offers a immediate possibility to make a clamp from the components. Ideal for service & maintenance. Each system is supplied in a dispenser box containing a full length of band and a number of the unique quick-lock housings with screw. The band is perforated, flexible and in stainless steel. 9 mm band width. ABA Banding System/W2B: Screw and housing: Electro zinc plated and yellow chromated. Band: AISI 430. Contain: KIT 3 m band, 8 quick-lock housing. Art.no. Description Band width Length Unit Pack Banding system W2B 9 mm 3 m PCS 1 767

54 9 Couplings Standard SMS Stainless DIN Rubber Lined Clips ABA Standard and Stainless Retaining clamps are primarily used for securing pipes, tubes and cables in place. The rubber profile prevents vibrations from being transmitted, safeguards against scratching and also insulates. Rubber clips are used in the automotive industry, machine construction, hydraulic and pneumatic applications, process industries, shipbuilding and Refrigeration. Band width 12,7 mm ABA Standard W1. Stainless (W4) SQ Retaining clamps are produced to DIN Bands have reinforced bolt holes for extra strength and rubber profile. Band width 12 mm. Other material options and clamp forms available on request. Art.no. Description For outer diam. Unit Pack Rubber Lined Clips Standard 4,8 mm PCS 100* Rubber Lined Clips Standard 6,4 mm PCS 100* Rubber Lined Clips Standard 7,9 mm PCS 100* Rubber Lined Clips Standard 9,5 mm PCS 100* Rubber Lined Clips Standard 11,1 mm PCS 100* Rubber Lined Clips Standard 12,7 mm PCS 100* Rubber Lined Clips Standard 14,3 mm PCS 100* Rubber Lined Clips Standard 15,9 mm PCS 100* Rubber Lined Clips Standard 19,0 mm PCS 50* Rubber Lined Clips Standard 22,2 mm PCS 50* Rubber Lined Clips Standard 25,4 mm PCS 50* Rubber Lined Clips Standard 28,6 mm PCS 50* Rubber Lined Clips Standard 31,8 mm PCS 50* Rubber Lined Clips Standard 34,9 mm PCS 50* Rubber Lined Clips Standard 38,1 mm PCS 50* Rubber Lined Clips Standard 44,5 mm PCS 25* Rubber Lined Clips Standard 51,0 mm PCS 25* Rubber Lined Clips SQ Stainless steel 5 mm PCS 100* Rubber Lined Clips SQ Stainless steel 6 mm PCS 100* Rubber Lined Clips SQ Stainless steel 8 mm PCS 100* Rubber Lined Clips SQ Stainless steel 10 mm PCS 100* Rubber Lined Clips SQ Stainless steel 13 mm PCS 100* Rubber Lined Clips SQ Stainless steel 15 mm PCS 100* Ear Clips ABA Standard S10 Ear Clips are available in galvanized steel. For permanent connection used for hoses to fuel filters, water pumps and radiator hoses. Tool: See Luna Hose clamp pliers art. no Standard - S10. Comparable to W1. Art.no. Description Hose size Unit Pack Ear Clip 5-7 mm PCS 100* Ear Clip 7-9 mm PCS 100* Ear Clip 9-11 mm PCS 100* Ear Clip mm PCS 100* Ear Clip mm PCS 100* Ear Clip mm PCS 100* Ear Clip mm PCS 100* Hose Clamp ABA Robust W2 A heavy-duty clamp with rolled-up band edges that is gentle on hoses. It is used in many applications such as for sealing heavy-gauge reinforced hoses used for irrigation, drainage, sludge pumping etc. Robust W2 in standard version is made in stainless steel AISI 430 (SS2320 / W3). Bolts in galvanized steel. Art.no. Description Hose size Band width Unit Pack Robust W mm 20 mm PCS 100* Robust W mm 20 mm PCS 100* Robust W mm 20 mm PCS 100* Robust W mm 20 mm PCS 100* Robust W mm 20 mm PCS 100* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* Robust W mm 20 mm PCS 50* 768

55 Power Clamps, single, double, standard S10 A very strong heavy duty double band clamp. Also available in a double screw version for extra clamping force. Both single and double are available in standard version. Acid resistant, are available to order, not in stock. Power Clamp Standard-S10: All parts are made of high grade carbon steel which have an electro zinc plating. Comparable to W1. Art.no. Description Hose size Unit Pack Single mm PCS 100* Single mm PCS 75* Single mm PCS 75* Single mm PCS 70* Single mm PCS 60* Single mm PCS 50* Single mm PCS 40* Single mm PCS 75* Single mm PCS 65* Single mm PCS 60* Single mm PCS 50* Double mm PCS 60* Double mm PCS 60* Double mm PCS 50* Double mm PCS 45* Double mm PCS 40* Double mm PCS 40* Double mm PCS 70* Double mm PCS 60* Double mm PCS 55* Double mm PCS 50* Double mm PCS 50* Double mm PCS 40* Double mm PCS 40* Double mm PCS 35* Double mm PCS 30* Double mm PCS 30* Double mm PCS 30* Couplings 9 Assortment clamps ABA 270 Contain: 270 pcs Clamps ABA and a Hose clip screwdrivers. The plastic box has a handle on top. Art. no = Stainless. Contents 8-14 mm, mm, mm 50 pcs mm, mm 25 pcs mm 20 pcs mm, mm 15 pcs mm, mm 10 pcs Hose clip screwdrivers 1 pc Art.no. Description Unit Pack Assortment clamps ABA 270 Standard PCS Assortment clamps ABA 270 Stainless PCS 1 Assortment clamps ABA 335 Contain: 235 pcs Clamps ABA and 100 pcs mini clamps and 3 pcs Hose clip screwdrivers. Approx. length 900 mm - ready to use in Hestra. Contents 8-14 mm, mm 30 pcs mm 45 pcs mm 34 pcs mm 36 pcs mm, mm, mm, mm, mm, mm 12 pcs Mini clamp 8-17 mm 10 pcs of each Hose clip screwdrivers 3 pcs Art.no. Description Unit Pack Assortment clamps ABA 335 Standard PCS 1 Hose clip screwdrivers Flexidriver ABA Flexible, Bends 90 angle. Art.no. Description Size hexagon Unit Pack Hose clip screwdriver ABA-250 mm 7 mm PCS 1 769

56 9 Couplings Pipe Clamp DIY Robust M8 pipe clamps for pipe dimensions between mm. Material: Steel, galvanized alternative stainless A2. Art.no. Description For diameter Contents Unit Pack Pipe Clamp 25 mm Galvanized PCS Pipe Clamp 28 mm Galvanized PCS Pipe Clamp 32 mm Galvanized PCS Pipe Clamp 35 mm Galvanized PCS Pipe Clamp 38 mm Galvanized PCS Pipe Clamp 42 mm Galvanized PCS Pipe Clamp 45 mm Galvanized PCS Pipe Clamp 48 mm Galvanized PCS Pipe Clamp 51 mm Galvanized PCS Pipe Clamp 54 mm Galvanized PCS Pipe Clamp 57 mm Galvanized PCS Pipe Clamp 60 mm Galvanized PCS Pipe Clamp 64 mm Galvanized PCS Pipe Clamp 67 mm Galvanized PCS Pipe Clamp 70 mm Galvanized PCS Pipe Clamp 73 mm Galvanized PCS Pipe Clamp 76 mm Galvanized PCS Pipe Clamp 83 mm Galvanized PCS Pipe Clamp 89 mm Galvanized PCS Pipe Clamp 95 mm Galvanized PCS Pipe Clamp 102 mm Galvanized PCS Pipe Clamp 25 mm Galvanized 2 pcs PAC Pipe Clamp 28 mm Galvanized 2 pcs PAC Pipe Clamp 32 mm Galvanized 2 pcs PAC Pipe Clamp 35 mm Galvanized 2 pcs PAC Pipe Clamp 38 mm Galvanized 2 pcs PAC Pipe Clamp 42 mm Galvanized 2 pcs PAC Pipe Clamp 45 mm Galvanized 2 pcs PAC Pipe Clamp 48 mm Galvanized 2 pcs PAC Pipe Clamp 51 mm Galvanized 2 pcs PAC Pipe Clamp 57 mm Galvanized 2 pcs PAC Pipe Clamp 60 mm Galvanized 2 pcs PAC Pipe Clamp 64 mm Galvanized 2 pcs PAC Pipe Clamp 54 mm Galvanized 2 pcs PAC Pipe Clamp 67 mm Galvanized 2 pcs PAC Pipe Clamp 70 mm Galvanized 2 pcs PAC Pipe Clamp 73 mm Galvanized 2 pcs PAC Pipe Clamp 76 mm Galvanized 2 pcs PAC Pipe Clamp 83 mm Galvanized 2 pcs PAC Pipe Clamp 89 mm Galvanized 2 pcs PAC Pipe Clamp 95 mm Galvanized 2 pcs PAC Pipe Clamp 102 mm Galvanized 2 pcs PAC Pipe Clamp 25 mm Stainless A2 2 pcs PAC Pipe Clamp 35 mm Stainless A2 2 pcs PAC Pipe Clamp 38 mm Stainless A2 2 pcs PAC Pipe Clamp 45 mm Stainless A2 2 pcs PAC Pipe Clamp 51 mm Stainless A2 2 pcs PAC Pipe Clamp 64 mm Stainless A2 2 pcs PAC Pipe Clamp 76 mm Stainless A2 2 pcs PAC 10 Power clamp Single 20 mm, carbon steel A very strong heavy duty band clamp for extra clamping force and it is used in many applications for most of our hoses. Material: Band steel 20x1 mm, yellow chromated carbon steel. Single screw version. Hexagonal screw, M6x45. Art.no. Description Diameter range Band width Material Unit Pack Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* Power clamp Single mm 20 mm Carbon steel PCS 10* 770

57 Power clamp Double 20 mm, carbon steel A very strong heavy duty band clamp for extra clamping force and it is used in many applications for most of our hoses. Material: Band steel 20x1 mm, yellow chromated carbon steel. Double screw version. Hexagonal screw, M6x45. Art.no. Description Diameter range Band width Material Unit Pack Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Power clamp Double mm 20 mm Carbon steel PCS 10* Couplings 9 Power clamp Double 25 mm, carbon steel A very strong heavy duty band clamp for extra clamping force and it is used in many applications for most of our hoses. Material: Band steel 25x1 mm, yellow chromated carbon steel. Double screw version. Hexagonal screw, M6x45. Art.no. Description Diameter range Band width Material Unit Pack Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Double mm 25 mm Carbon steel PCS 10* Power clamp Single 20 mm, Acid resistant A very strong heavy duty band clamp for extra clamping force and it is used in many applications for most of our hoses. Material: Band steel 20x1 mm, 2343 w5 Acid resistant steel. Single screw version. Hexagonal screw, M6x45. Art.no. Description Diameter range Band width Material Unit Pack Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* Power clamp Single mm 20 mm Acid resistant PCS 10* 771

58 9 Couplings Power clamp Double 20 mm, Acid resistant A very strong heavy duty band clamp for extra clamping force and it is used in many applications for most of our hoses. Material: Band steel 20x1 mm, W5 (EN ). Double screw version. Hexagonal screw, M6x45, A4 (EN /AISI 3.16). Art.no. Description Diameter range Band width Material Unit Pack Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Power clamp Double mm 20 mm Acid resistant PCS 10* Tensioning Tool Bandimex An efficient band tool for several applications within the industry. It is used for mounting bands, buckles and clamps. Suitable for instance for urgent temporary pipe repairs, for instance traffic signs, cables, ventilation ducts, poles, bars, etc. Fits all pipe dimensions. Pressure capacity over 1000 kg. Suitable for electric installations, construction, shipping, aviation, heating, ventilation and sanitary installations and other industrial purposes where a flexible fastening is required. Art.no. Orig. num. Description Unit Pack Tensioning Tool Bandimex PCS 1 Adapter Bandimex Bandimex HD-Adapter to apply Bandimex Preformed Clamps. For use with the Bandimex Tool W 001 fixed in a vise as well as for portable applications. Art.no. Orig. num. Description Unit Pack Adapter PCS 1 Band Bandimex Band of stainless steel, intended for general industrial use. Available in different widths and thickness. Art.no. Orig. num. Description Band width Band thickness Length Unit Pack B202 Band 1/4" - 6,4 mm 0,50 mm 30 m PCS B203 Band 3/8" - 9,5 mm 0,64 mm 30 m PCS B204 Band 1/2" - 12,7 mm 0,75 mm 30 m PCS B205 Band 5/8" - 16 mm 0,75 mm 30 m PCS B206 Band 3/4" - 19 mm 0,75 mm 30 m PCS 1 Buckles Bandimex Constructed to fit as well as single as double wrapped Bandimex Band, in material and width. Made of stainless steel. Art.no. Orig. num. Description For band width Contents Unit Pack S252 Buckles 6,4 mm 100 pcs PAC S253 Buckles 9,5 mm 100 pcs PAC S254 Buckles 12,7 mm 100 pcs PAC S255 Buckles 16 mm 100 pcs PAC S256 Buckles 19 mm 100 pcs PAC 1 Screw-Buckles Bandimex Is used when a small space doesn t allow rotation of the tool or when a temporary or adjustable clamp is required, for retensioning clamps. Made of stainless steel. Art.no. Orig. num. Description For band width Contents Unit Pack S722 Screw-Buckles 9,5 mm 50 pcs PAC S724 Screw-Buckles 12,7 mm 25 pcs PAC S726 Screw-Buckles 19 mm 25 pcs PAC 1 772

59 Band Bandimex A thin band made of stainless steel, 0,4 mm. Intended for light applications such as mounting small signs, or insulating round pipes or cisterns. Art.no. Orig. num. Description Band width Band thickness Length Unit Pack B133 Band 9,5 mm 0,4 mm 30 m PCS B134 Band 12,7 mm 0,4 mm 30 m PCS B135 Band 16 mm 0,4 mm 30 m PCS B136 Band 19 mm 0,4 mm 30 m PCS 1 Buckles Bandimex Intended for band for light applications such as mounting small signs, or insulating round pipes or cisterns. Made of stainless steel. Art.no. Orig. num. Description For band width Contents Unit Pack S153 Buckle 9,5 mm 100 pcs PAC S154 Buckle 12,7 mm 100 pcs PAC S155 Buckle 16 mm 100 pcs PAC S156 Buckle 19 mm 100 pcs PAC 1 Preformed Clamps Bandimex The Preformed Clamps are resistant against vibrations and needs no hammering or jolting. They are locked automatically under full tension with a simple lever movement. The clamps are mounted with a tension tool and adapter. Made of stainless steel. Art.no. Orig. num. Description Band width Thickness Diameter Contents Unit Pack V240 Preformed Clamp 6,4 mm 0,5 mm 19 mm 100 pcs PAC V242 Preformed Clamp 6,4 mm 0,5 mm 25 mm 100 pcs PAC V243 Preformed Clamp 9,5 mm 0,64 mm 25 mm 100 pcs PAC V202 Preformed Clamp 9,5 mm 0,64 mm 35 mm 100 pcs PAC V236 Preformed Clamp 12,7 mm 0,75 mm 45 mm 100 pcs PAC 1 Couplings 9 Endless Worm Drive Bands Bandimex To make hose clips as required. Cut the steel strip to appropriate length and then fit the clip and bend the steel strip under the clip. Band and housing are made of stainless steel. The band is available in different length and width. Suitable for food industries etc. Use an ordinary screwdriver. Art.no. Description Length Width Min. diameter Unit Pack Endless Worm Drive Band 2 m 7 mm 35 mm PCS Endless Worm Drive Band 3 m 11 mm 35 mm PCS Endless Worm Drive Band 5 m 14 mm 35 mm PCS Endless Worm Drive Band 30 m 14 mm 35 mm PCS 1 Housing Bandimex To make hose clips as required. Use an ordinary screwdriver. Made of stainless steel. Intended to be used in combination with the endless worm drive bands. Art.no. Description For band width Contents Unit Pack Housing 7 mm 10 pcs PAC Housing 11 mm 10 pcs PAC Housing 14 mm 10 pcs PAC Housing 14 mm 50 pcs PAC 1 773

60 9 Rubber sheeting and Rubber mats Rubber sheeting and Rubber mats Rubber sheeting Rubber sheeting NR/SBR Description: Produced in NR, Natural rubber/sbr, Styrene-butadiene Rubber, for gaskets e.g. This material is suitable for gaskets and abrasion resistant applications, where the requirements for heat, chemical and oil resistance are limited. The sheeting is excellent for mud flaps. SIS Hardness 70±7 Shore Density 1,46±0,05 g/cm³ dry air -10 C to +70 C (temporary +90 C) moist air -10 C to +50 C Tensile strength at break 4,0 MPa Elongation at break 200% Black Art.no. Thickness Number of layers Length Width Weight Unit Pack mm 20 m 1400 mm 1,46 kg/m ,5 mm 20 m 1400 mm 2,19 kg/m mm 20 m 1400 mm 2,92 kg/m mm 10 m 1400 mm 4,38 kg/m mm 10 m 1400 mm 5,84 kg/m mm 10 m 1400 mm 7,30 kg/m mm 10 m 1400 mm 8,76 kg/m mm 5 m 1400 mm 11,68 kg/m mm 5 m 1400 mm 14,60 kg/m mm 1 10 m 1400 mm 4,38 kg/m mm 1 10 m 1400 mm 5,84 kg/m mm 1 10 m 1400 mm 7,30 kg/m mm 2 5 m 600 mm 3,75 kg/m mm 2 5 m 1200 mm 7,50 kg/m 6 Chloroprene rubber sheeting CR Description: Weather resistant. Chloroprene rubber has good ageing properties due to depending on good ozone and weather resistance against ozone and ageing outdoor. The material also has moderately good abrasion resistance and oil resistance. Hardness 65±7 Shore Density 1,38±0,05 g/cm³ dry air -10 C to +70 C (temporary +90 C) Tensile strength at break 5,0 MPa Elongation at break 300% Black Art.no. Thickness Number of layers Length Width Weight Unit Pack mm 20 m 1400 mm 1,38 kg/m mm 10 m 1400 mm 4,14 kg/m mm 10 m 1400 mm 5,52 kg/m 14 Nitrile rubber sheeting NBR Description: Nitrile rubber is recommended when good resistance against petrol, oil and fat is required. The material has good mechanical as well as heat properties. It is moderately resistant against acids, it is not resistant to against sulphuric acid above 60%, nitric acid and chrome acid. The sheeting is smooth on both sides. Feather-white dusting up to and including 6 mm. Hardness 65±7 Shore Density 1,48±0,05 g/cm³ in oil -10 C to +90 C in water -10 C to +80 C in air -10 C to +70 C (temporary +90 C) Tensile strength at break 6,0 MPa Elongation at break 250% Black Art.no. Thickness Number of layers Length Width Weight Unit Pack mm 20 m 1400 mm 1,48 kg/m mm 20 m 1400 mm 2,96 kg/m mm 10 m 1400 mm 4,44 kg/m mm 10 m 1400 mm 5,92 kg/m mm 10 m 1400 mm 7,40 kg/m mm 1 10 m 1400 mm 4,44 kg/m

61 Rubber sheeting EPDM Description: Heat and cold resistant. EPDM has very good temperature and ozone properties. It has also good ageing and chemical properties. SIS Hardness 70±5 Shore Density 1,23±0,05 g/cm³ dry air -40 C to +100 C Tensile strength at break 5,0 MPa Elongation at break 200% Black Art.no. Thickness Length Width Weight Unit Pack mm 20 m 1400 mm 2,46 kg/m mm 10 m 1400 mm 3,69 kg/m mm 10 m 1400 mm 4,92 kg/m mm 10 m 1400 mm 6,15 kg/m 14 Wear resistant rubber sheeting 60 Description: An exceptional wear resistant rubber sheeting. The material has very good physical characteristics. The sheeting is especially produced to withstand wear from material with sharp edges and high weight as stone, crushed minerals, etc. The material has low resistance against oil, oil splashes etc. Hardness 60±5 Shore Density 1,15±0,05 g/cm³ dry air -30 C to +70 C Tensile strength at break 15,0 MPa Elongation at break 400% Black Art.no. Thickness Length Width Weight Unit Pack mm 10 m 1400 mm 3,40 kg/m mm 10 m 1400 mm 5,70 kg/m mm 10 m 1400 mm 6,90 kg/m 14 Rubber sheeting and Rubber mats Material for gaskets Neoprene rubber: Chloroprene rubber (CR) has good ozone and weather resistance resistance against ozone and withstands weather and wind very good. Moderately good oil resistance. : ºC. Oil Proof Jointing: An excellent material for making gasket jointings for combustion engines (carburettors, sump, gear box etc). Organic fibres free from rubber, impregnated with oil resistant to solvents. Max. temperature and pressure: +120ºC, 10 MPa. High pressure gasket: A high quality universal gasket for different media. Very good resistance to steam, hot water and carbon hydrogen kolväten. Max. temperature 300ºC. Rubber cork: Suitable as gasket material for cold and hot water, organic solvents, gas, air, flanges, lids, doors like combustion engines, petrol gauges, refineries, tanks, transformers e.g. Made of fine granulated cork, vulcanized together with a synthetic rubber compound under high pressure. Max temperature: + 120ºC. Max pressure: 10 MPa. Complete gasket assortment: contains all sheeting (60 pcs), and an exposition box, size 900x150x490 mm (Length x height x depth). The box can be purchased separately. Art.no. Description Thickness Length Width Unit Pack Neoprene rubber 1 mm 500 mm 200 mm Black PCS 5* Neoprene rubber 2 mm 500 mm 200 mm Black PCS 5* Neoprene rubber 3 mm 500 mm 200 mm Black PCS 5* Oil Proof Jointing 0,25 mm 500 mm 200 mm Brown PCS 5* Oil Proof Jointing 0,50 mm 500 mm 200 mm Brown PCS 5* Oil Proof Jointing 1 mm 500 mm 200 mm Brown PCS 5* High pressure gasket 0,50 mm 500 mm 200 mm Green PCS 5* High pressure gasket 1 mm 500 mm 200 mm Green PCS 5* High pressure gasket 1,50 mm 500 mm 200 mm Green PCS 5* Rubber cork 1 mm 500 mm 200 mm cork PCS 5* Rubber cork 2 mm 500 mm 200 mm cork PCS 5* Rubber cork 3 mm 500 mm 200 mm cork PCS 5* Complete gasket assortment PAC Exposition box, wood PCS

62 9 Rubber sheeting and Rubber mats Rubber mats Hammer blow mat Description: Rubber flooring for heavy traffic areas. Slip resistant. Easy to clean. Hardness Density black flooring Density grey flooring black flooring grey flooring Fine grooved rubber mat Description: A durable rubber flooring, natural rubber. Intended as anti slip protection on stairs, ladders, inside all kinds of vehicles and premises vulnerable to wear. Suitable for elevators and walls. The mat is also available with one insert. It has good properties with regard to tear resistance. Delivered in grey or black, made of patterned fabric back to facilitates gluing and provide fixing. Oil resistant: See Nitrile rubber sheeting for specification. Hardness black flooring Hardness grey flooring Density black flooring Density grey flooring Electrical properties 70±5 Shore 1,46±0,05 g/cm³ 1,60±0,05 g/cm³ -10 C to +70 C -20 C to +70 C Art.no. Thickness Length Width Note Unit Pack mm 10 m 1200 mm Nature Black mm 10 m 1400 mm Nature Black mm 10 m 1400 mm Oil resistant Black mm 10 m 1400 mm Electrical insulation Grey mm 10 m 1400 mm Electrical insulation Grey 14 60±5 Shore 70±5 Shore 1,46±0,05 g/cm³ 1,60±0,05 g/cm³ -20 C to +70 C Electrical insulation Art.no. Thickness Length Width Note Unit Pack mm 10 m 1000 mm Durable Black mm 10 m 1200 mm Durable Black mm 10 m 1400 mm Durable Black mm 10 m 1400 mm Oil resistant Black mm 10 m 1000 mm Electrical insulation Grey mm 10 m 1400 mm Electrical insulation Grey 14 Medium grooved rubber mat Description: Suitable as a runner, floor- and wall covering in cars, busses, boats, elevators, trucks etc. Can also be used as collision guard on walls and uprights. The mat has one insert. Hardness Density Electrical properties Wide grooved rubber mat Description: A rubber flooring intended as gratings, foot scraper or protective cover. The mat is also suitable as wall and floor covering, scuff guard e.g. The longitudinal grooves makes the mat easy to clean. Delivered with a smooth surface. The back is made of patterned fabric to facilitates gluing and provide good stability. Oil resistant: See Nitrile rubber sheeting for specification. Hardness Density 70±5 Shore 1,46±0,05 g/cm³ -20 C to +70 C Electrical insulation Art.no. Thickness Length Width Weight Unit Pack ,5 mm 10 m 1300 mm 3,70 kg/m² Black ,5 mm 10 m 1400 mm 3,70 kg/m² Black ,5 mm 10 m 1300 mm 3,70 kg/m² Grey, electrical insulation ,5 mm 10 m 1400 mm 3,70 kg/m² Grey, electrical insulation 14 60±5 Shore 1,46±0,05 g/cm³ -20 C to +70 C Art.no. Thickness Length Width Note Unit Pack mm 10 m 1250 mm Nature Black mm 10 m 1400 mm Nature Black mm 10 m 1200 mm Oil resistant Black mm 10 m 1400 mm Oil resistant Black

63 Entrance mat rib patterned surface Description: A rubber flooring intended as gratings, foot scraper or protective covering. The mat is suitable in entrances as well as wall and floor covering, scuff guard e.g. The back is made of patterned fabric, the mat will be fixed and not glide away. Hardness Density Vibration absorbers Machine mounting Machine mounting Type MS Description: Suitable for lathes, milling machines, blanking presses, grinding machines, presses etc. With levelling bolt for height adjustment. Can be adjusted as long as the screw length permits. Provides simple mounting without permanent attachment. The machine park becomes flexible. The rubber block is oil and chemical resistant and all metal parts are galvanized and chromated finish against rust. This provides the greatest possible friction and prevents the machine from walking. 70±5 Shore 1,45±0,05 g/cm³ -30 C to +50 C Art.no. Length Width Thickness Note Unit Pack ,8 m 1350 mm 14 mm Black PCS ,8 m 1350 mm 14 mm Black Oil resistant PCS 1 Art.no. Type D H min G Screw Max. load Weight Unit Pack MS mm 23 mm M mm 250 kg 0,4 kg PCS 4* MS mm 25 mm M mm 600 kg 0,5 kg PCS 4* MS mm 29 mm M mm 1200 kg 1,0 kg PCS 4* MS mm 35 mm M mm 3000 kg 2,2 kg PCS 2* MS mm 39 mm M mm 4000 kg 2.9 kg PCS 2* MS mm 44 mm M mm 6000 kg 4,8 kg PCS 2* Vibration absorbers 9 Machine mounting Type Rego 401 and 402 Description: With levelling screw for height adjustment. Can be adjusted as long as the screw length permits. Provides simple mounting without permanent attachment. For light machines. Vertical height adjustment is made by conical side control of the adjuster screw. Patented, concave rubber section of oil resistant neoprene rubber (60º Shore), this prevents the machine from wandering. Accessories: Long adjuster screw. Thread (G): M12. Screw length Accessories Art.no. Description Thread Length Unit Pack Screw M6S 8.8 M12x200 DIN 933 FZB Thread M mm PCS 2 Machine mounting Type Rego Description: With levelling screw for height adjustment. Can be adjusted as long as the screw length permits. Provides simple mounting without permanent attachment. Made of nodular iron. The adjuster screw is galvanized, with square milled end. Contact between upper and lower sections is made through a patented, precision machined column guide of large diameter. Patented, concave rubber section of oil resistant neoprene rubber (60º Shore), this prevents the machine from wandering. The unit s surface automatically forms after the machine weight. Accessories Long adjuster screw. Screw length 80 mm Art.no. Orig. num. Ext. size Adjustable height Max. load Weight Unit Pack x63 mm mm 250 kg 0,8 kg PCS 4* x70 mm mm 500 kg 1,1 kg PCS 4* 120 mm Art.no. Orig. num. Ext. size Adjustable height G Max. load Weight Unit Pack x84 mm mm M kg 0,5 kg PCS 2* x116 mm mm M kg 1,1 kg PCS 2* x160 mm mm M kg 5,1 kg PCS 1 Accessories Art.no. Description Thread Length Unit Pack Extra adjuster screw, long M mm PCS Extra adjuster screw, long M mm PCS 2 777

64 9 Vibration absorbers Picture 1 Picture 2 Picture 3 Machine mounting Type LFJ Description: The rubber features are utilised effectively combining compression and shear. This produces a stable element with a wide range of application. Suitable for combustion engines, pumps, workshop machines, compressors, fans etc. Dimensions in mm. Table heading Description Type LFJ A=45 Shore, B=60 Shore D/H Diam. x Height G Thread mm Max Max. load rating option kg Resilience Max. resilience mm Pressure Pressure load static spring coefficient K, kg/mm Weight Weight in grams Art.no. Type Fig D/H L a d S G Max Resilience Pressure Weight Unit Pack A 1 55X40 10x PCS B 1 55X40 10x PCS A 2 106X PCS B 2 106X PCS A 3 150X PCS B 3 150X PCS A 2 150X PCS B 2 150X PCS A 3 177X PCS B 3 177X PCS 1 Picture 4 Machine mounting Type LFJ/S Description: A design which employs the advantage of rubber in an efficient way, combining compression and shear loading on the rubber body. This produces a stable element with a wide range of application. Suitable for combustion engines, pumps, workshop machines, compressors, fans etc. LFJ/S is provided with fail-safe construction and resilient stop. The element resists temporary traction forces up to 3 g and gives great security against unexpected traction forces. Dimensions in mm. Table heading Description Type LFJ/S A=45 Shore, B=60 Shore D/H Diam. x Height G Thread mm Max Max. load rating option kg Resilience Max. resilience mm Pressure Pressure load static spring coefficient K, kg/mm Weight Weight in grams Art.no. Type Fig D/H L a d S G Max Resilience Pressure Weight Unit Pack A 4 77X PCS B 4 77X PCS A 4 77X PCS B 4 77X PCS A 4 94X PCS B 4 94X PCS A 4 108X PCS B 4 108X PCS A 4 121X PCS B 4 121X PCS 1 Machine mounting Type LFJ/S-M Description: The same area of application as LFJ but a softer spring action to provide a better isolation degree. LFJ-M is particularly suitable for low-speed machines. Dimensions in mm. Table heading Description Type LFJ/S-M A=45 Shore, B=60 Shore G Thread mm Max Max. load rating option kg Resilience Max. resilience mm Pressure Pressure load static spring coefficient K, kg/mm Weight Weight in grams Art.no. Type D H d K A G Max Resilience Pressure Weight Unit Pack A M ,0 6,0 255 PCS B M ,0 12,0 255 PCS A M ,0 14,0 372 PCS B M ,0 30,0 372 PCS A M ,5 27,0 800 PCS B M ,0 53,5 800 PCS 1 778

65 Machine mounting Type IS Description: The IS-element is provided with chock security, combining compression and shear loads and can therefore be used with compression, pull and shear load. Suitable for apparatus in boats, ships and stationary installations. The rubber has a neoprene base and is oil and ageing resistant. The rubber has not been vulcanised to the steel parts. The IS-element is also available in 50 and 70 Shore A. Dimensions in mm. Table heading Type G Max Resilience Pressure K Isolation mount Type W Description: Especially designed to allow considerable downward flexibility at low loads. Achieved by a cub-shaped recess on the underside. Recommended when a soft installation is required, i.e. low-speed compressors, refrigerator units, fans and for sensitive equipment such as measuring apparatus, scales etc. Dimensions in mm. Table heading Type G Max Resilience Pressure Description A=45 Shore, B=60 Shore Thread mm Max. load rating option kg Max. resilience mm Pressure load static spring coefficient K, kg/mm Art.no. Type AxB D d h t H G Max Resilience Pressure K Weight Unit Pack IS 30 A 50x g PCS IS 30 B 50x g PCS IS 40 A 61x g PCS IS 40 B 61x g PCS IS 100 A 64x g PCS IS 100 B 64x g PCS IS 150 A 74x g PCS IS 150 B 74x g PCS IS 200 B 108x g PCS IS 300 A 143x g PCS IS 300 B 143x g PCS 1 Description A=45 Shore, B=60 Shore Thread mm Max. load rating option kg Max. resilience mm Pressure load static spring coefficient K, kg/mm Art.no. Type D H B E A d G Max Resilience Pressure Weight Unit Pack W7A M 6 4 3,5 1,1 20 g PCS W7B M 6 9 3,5 2,6 20 g PCS W25A M ,5 4,4 72 g PCS 12* W25B M ,5 8,9 72 g PCS W50A M ,0 5,7 156 g PCS W50B M ,5 11,8 156 g PCS W75A M ,5 8,2 260 g PCS 4* W75B M ,5 15,3 260 g PCS W150A M ,0 13,0 420 g PCS W150B M ,0 22,0 420 g PCS W400A M ,0 17, g PCS W400B M ,0 31, g PCS 1 Vibration absorbers 9 779

66 9 Vibration absorbers ANC ANC AND Schock buffer Type ANC and AND Description: ANC consists of a cylindrical rubber body bonded to a square baseplate of steel, each corner of the baseplate has a fixing hole. AND has a threaded bolt instead of a baseplate of steel. This type of schock absorber can absorb big energy and is delivered in nine different sizes. ANC and AND is used to limit movement of equipment on machine components, wagons, traversing cranes, lifting cranes etc. Hardness: 70 Shore. Dimensions in mm. Table heading Description G Thread mm Max Max. load rating option kg Resilience Max. resilience mm Art.no. Type D/H a L d S G Max Resilience Weight Unit Pack ANC 40 40x g PCS ANC 50 50x g PCS ANC 63 63x g PCS ANC 80 80x g PCS ANC x g PCS ANC x g PCS ANC x g PCS ANC x g PCS ANC x g PCS AND 40 40x M g PCS AND 50 50x M g PCS AND 63 63x M g PCS AND 80 80x M g PCS AND x M g PCS AND x M g PCS AND x M g PCS AND x M g PCS 1 Isolation mat Description: Made of oil resistant rubber. Several boards can be connected in series to achieve the required resilience. Intended for vibrations absorbing with limited requirements. Suitable for damping high frequency vibrations, high narrow machine, pillar drills. Also suitable for use in offices and households. Art.no. Type L B H Max. load Weight Unit Pack Single 500 mm 250 mm 5 mm 8 kg/cm² 60 g PCS 20* Double 500 mm 250 mm 10 mm 9 kg/cm² 120 g PCS 15* Isolation mount Type SE 75 Description: Type SE is suitable for the isolating of high frequency disturbances and provides reduction of structure-borne noise. Suitable for office equipment, textile machinery, domestic appliances, electric motors and weighing equipment. The SEmounting consists of an annular rubber section, securely bonded to a single steel support. A clearance hole is provided which can either be left plain or tapped to suit the application. Dimensions in mm. Art.no. Type Diam. Height Hole Max. load Weight Unit Pack SE mm 15 mm 8 mm 150 kg 0,069 kg PCS 1 780

67 Bobbin Type A Description: Cylindrical mountings is a simple and robust rubber element, 60 Shore. Suitable for a wide range of applications, isolating fans, pumps, air conditioning plants, equipment cabinets, electric motors, compressors etc. Type A with screw/ screw. Table heading Description D/H Diameter x Height mm B=60 Shore Thread Thread x length mm Pressure K Pressure load static spring coefficient K, kg/mm Pressure F Pressure load max F, kg Shear K Shear load static spring coefficient K, kg/mm Shear F Shear load max F, kg Art.no. D/H Thread Pressure K Pressure F Shear K Shear F Unit Pack A 10/10 B M4X10 4,7 6,0 0,9 4,0 PCS A 15/15 B M4X15 6,5 12,5 1,4 9,5 PCS A 20/15 B M6X15 14,0 22,5 2,7 16,5 PCS A 20/20 B M6X15 8,5 24,0 1,7 15,5 PCS A 20/25 B M6X15 6,0 14,5 1,3 15,0 PCS A 25/15 B M6X15 25,5 37,5 4,5 25,0 PCS A 25/20 B M6X15 14,5 37,5 3,0 23,5 PCS A 25/25 B M6X15 8,5 37,5 1,5 21,0 PCS A 30/15 B M8X20 47,0 66,0 6,0 38,0 PCS A 30/20 B M8X20 23,5 53,0 4,5 37,0 PCS A 30/30 B M8X20 11,5 49,0 3,5 35,0 PCS A 40/30 B M8X20 20,0 84,0 5,0 67,0 PCS A 40/40 B M8X20 14,5 81,0 3,5 59,0 PCS A 50/20 B M10X25 53,0 175,0 9,5 115,0 PCS A 50/30 B M10X25 45,0 150,0 8,0 105,0 PCS A 50/40 B M10X25 26,0 150,0 8,5 100,0 PCS A 50/50 B M10X25 17,5 135,0 1,5 95,0 PCS A 70/45 B M10X30 42,0 290,0 9,0 200,0 PCS A 75/40 B M12X35 78,0 360,0 12,5 226,0 PCS A 75/50 B M12X35 51,0 333,0 7,2 233,0 PCS A 75/55 B M12X35 45,0 322,0 8,0 215,0 PCS A 100/55 B M16x45 96,0 640,0 16,5 415,0 PCS 1 Bobbin Type B Description: Cylindrical vibration damper is a simple and robust rubber element, 60 Shore. Suitable for a wide range of applications, isolating fans, pumps, air conditioning plants, equipment cabinets, electric motors, compressors etc. Type B with screw/internal thread. Table heading Description D/H Diameter x Height mm B=60 Shore Thread Thread x length mm Pressure K Pressure load static spring coefficient K, kg/mm Pressure F Pressure load max F, kg Shear K Shear load static spring coefficient K, kg/mm Shear F Shear load max F, kg Art.no. D/H Thread Pressure K Pressure F Shear K Shear F Unit Pack B 10/10 B M4X10 4,7 5,0 0,9 3,5 PCS B 15/15 B M4X8 6,5 11,5 1,4 8,5 PCS B 20/15 B M6X15 14,0 22,5 2,7 15,5 PCS B 20/20 B M6X15 8,5 20,0 1,8 15,0 PCS B 20/25 B M6X15 6,0 19,5 1,3 15,0 PCS B 25/15 B M6X15 24,0 35,0 7,0 24,0 PCS B 25/20 B M6X15 14,5 32,5 3,0 23,5 PCS B 30/15 B M8X20 58,5 50,0 7,5 33,0 PCS B 30/20 B M8X20 23,5 45,0 4,5 31,0 PCS B 30/30 B M8X20 21,5 43,0 1,8 28,0 PCS B 40/30 B M8X20 20,0 81,0 5,0 59,0 PCS B 40/40 B M8X20 14,5 77,0 3,5 54,0 PCS B 50/20 B M10X25 53,0 175,0 9,5 115,0 PCS B 50/30 B M10X25 45,0 150,0 8,0 105,0 PCS B 50/40 B M10X25 26,0 145,0 3,5 102,0 PCS B 50/50 B M10X25 17,5 135,0 2,2 100,0 PCS B 70/45 B M10X30 42,0 290,0 9,0 200,0 PCS B 75/40 B M12X35 78,0 360,0 12,5 226,0 PCS B 75/50 B M12X35 51,0 333,0 10,3 223,0 PCS B 75/55 B M12X35 45,0 322,0 8,0 220,0 PCS B 100/55 B M16X45 96,0 640,0 16,5 415,0 PCS 1 Vibration absorbers 9 781

68 9 Hose connectors Bobbin Type C Description: Cylindrical vibration damper is a simple and robust rubber element, 60 Shore. Suitable for a wide range of applications, isolating fans, pumps, air conditioning plants, equipment cabinets, electric motors, compressors etc. Type C with internal thread/internal thread. Table heading Description D/H Diameter x Height mm B=60 Shore Thread Thread x length mm Pressure K Pressure load static spring coefficient K, kg/mm Pressure F Pressure load max F, kg Shear K Shear load static spring coefficient K, kg/mm Shear F Shear load max F, kg Art.no. D/H Thread Pressure K Pressure F Shear K Shear F Unit Pack C 10/10 B M4X4 4,7 3,0 0,9 2,2 PCS C 15/15 B M4X4 6,5 9,0 1,4 7,0 PCS C 20/20 B M6X6 8,5 16,0 1,7 11,5 PCS C 25/20 B M6X6 14,5 32,5 3,0 23,5 PCS C 25/25 B M6X6 8,0 30,0 2,0 18,0 PCS C 30/20 B M8X8 27,5 38,0 4,5 38,0 PCS C 30/30 B M8X8 11,5 30,0 2,5 30,0 PCS C 40/30 B M8X8 20,0 81,0 5,0 59,0 PCS C 40/40 B M8X8 14,5 70,0 3,5 52,0 PCS C 50/30 B M10X10 45,0 150,0 8,0 105,0 PCS C 50/36 B M10X10 28,0 147,0 7,0 103,0 PCS C 50/40 B M10X10 26,0 145,0 5,0 100,0 PCS C 50/50 B M10X10 17,5 135,0 4,0 95,0 PCS C 70/45 B M10X10 49,0 290,0 9,0 200,0 PCS C 75/40 B M12X12 78,0 360,0 12,5 226,0 PCS C 75/50 B M12X12 51,0 333,0 9,0 223,0 PCS C 75/55 B M12X12 45,0 322,0 8,0 220,0 PCS C 100/55 B M16X16 96,0 640,0 16,5 415,0 PCS 1 Bobbin Type D, K/D, KP/D, E Description: Cylindrical vibration damper is a simple and robust rubber element, 60 Shore. Suitable for a wide range of applications, isolating fans, pumps, air conditioning plants, equipment cabinets, electric motors, compressors etc. Type D with screw. Type K/D conic with screw. Type KP/D conic with screw. Type E with internal thread. Table heading D/H Thread Pressure K Pressure F Description Diameter x Height mm B=60 Shore Thread x length mm Pressure load static spring coefficient K, kg/mm Pressure load max F, kg Art.no. D/H Thread Pressure K Pressure F Unit Pack D 10/10 B M4X10 5,5 3 PCS D 20/15 B M6X15 150,0 25 PCS D 25/17 B M6X18 24,0 25 PCS D 30/20 B M8X20 28,7 25 PCS D 30/30 B M8X15 32,0 25 PCS D 40/30 B M8X23 34,2 25 PCS D 50/20 B M10X28 97,1 100 PCS D 75/25 B M12X37 281,0 220 PCS D 75/36 B M12X35 300,0 230 PCS K/D 25/17 B M6X PCS K/D 50/18 B M10X PCS K/D 80x80x30 B M12X PCS K/D 125/45 B M16X PCS KP/D 30/36 B M8X20 30 PCS KP/D 50/58 B M10X PCS KP/D 115/133 B M16X45 50 PCS E 30/20 B M8 28,7 25 PCS E 40/30 B M8 34,2 25 PCS E 50/20 B M10 93,1 100 PCS 1 Hose connectors Quick release couplings Nito 1/2"-system Coupling set Nito 5460 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Content: Coupler with 1/ 2 hose tail 5350 S and Nipple with 1/2 hose tail Art.no. Description Fits Unit Pack Coupling set /2" hose PCS 5* 782

69 Coupling set Nito 5450 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Content: Coupler with 1/ 2 hose tail 5350 S and Nipple with 1/2 hose tail Art.no. Description Fits Unit Pack Coupling set /2" hose PCS 5* Coupler with hose tail Nito 5349S, 5350S, 5351S For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Fits Unit Pack Coupler with hose tail 5349S 3/8" hose PCS 5* Coupler with hose tail 5350S 1/2" hose PCS 5* Coupler with hose tail 5351S 3/4" hose PCS 5* Coupler with hose tail and stop valve Nito 5353S For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Art.no. Description Fits Unit Pack Coupler with hose tail 5353S 1/2" hose PCS 5* Coupler with female thread and stop valve Nito 5353R For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Art.no. Description Dimension Unit Pack Coupler with hose tail 5353R Female G1/2 and G3/4 thread PCS 5* Coupler with male thread Nito 5350N, 5352N For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Coupler with hose tail 5350N Male G1/2 thread PCS 5* Coupler with hose tail 5352N Male G3/4 thread PCS 5* Coupler with female thread Nito 5350 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Coupler with hose tail 5350 Female G1 1/2 thread PCS 5* Coupler with 1/2", 3/4" female thread and M22x1 Thread Nito 5352RM For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Coupler with hose tail 5352RM Female G3/4, G1/2, M22x1 PCS 5* Nipple Nito 5359 In combination with plastic connections. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. For quick and safe hose connections for indoor and outdoor use. Art.no. Description Fits Unit Pack Nipple /2" hose PCS 5* Nipple Nito 5369, 5370 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Nipple 5369 Female G3/4 x Male G1/2 thread PCS 5* Nipple 5370 Female M22x1 x Male G1/2 thread PCS 5* Nipple with hose tail Nito 5360, 5360B For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Fits Unit Pack Nipple with hose tail /2" hose PCS 5* Nipple with hose tail 5360B 3/8" hose PCS 5* Hose connectors 9 783

70 9 Hose connectors Nipple with hose tail Nito 5360A For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Fits Unit Pack Nipple with hose tail 5360A 1/2" and 3/4 hose PCS 5* Nipple with female thread Nito 5361, 5361A, 5362 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Nipple 5361 Female G1/2 thread PCS 5* Nipple 5361A Female G3/4 thread PCS 5* Nipple 5362 Female M22x1 thread PCS 5* Nipple with male thread Nito 5364, 5364A, 5365A For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Nipple 5364 Male G1/2 thread PCS 5* Nipple 5364A Male G3/4 thread PCS 5* Nipple 5365A Male M24x1 thread PCS 5* Connector, double Nito 5366 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. To be used in combination with 1/2" Coupler. Art.no. Description Unit Pack Connector, double 5366 PCS 5* Adjustable nozzle for 1/2" hose coupling Nito 5375 Adjustable from hard jet to fine mist. Suitable for Nito couplings. Art.no. Description Unit Pack Adjustable nozzle 5375 PCS 5* Water Gun Nito 5380 Adjustable from hard jet to fine mist. Suitable for Nito couplings. With on/off function. Chrome plate brass. Handle of polypropene, insulated against cold and hot water. Max temperature 60 C and max working pressure 4 bar, max temperature 40 C and max working pressure 6 bar. Art.no. Description Unit Pack Water Gun Nito 5380 PCS 5* Quick release couplings Nito 3/4"-system Coupler with female thread Nito 5750 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Coupler 5750 Female G3/4 thread PCS 5* Coupler with hose tail Nito 5750S For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Fits Unit Pack Coupler with hose tail 5750S 3/4" hose PCS 5* Coupler with hose tail Nito 5750SV For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Note! Mounting with hose clamp. Art.no. Description Fits Unit Pack Coupler with hose tail 5750SV 3/4" hose PCS 5* 784

71 Coupler with female thread and stop valve Nito 5750V For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Art.no. Description Dimension Unit Pack Coupler Nito 5750V Female G3/4 thread PCS 5* Nipple with hose tail and stop valve Nito 5751 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Art.no. Description Fits Unit Pack Coupler with hose tail /4" hose PCS 5* Nipple with female thread Nito 5752 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. With stop valve. Art.no. Description Dimension Unit Pack Nipple 5752 Female G3/4 thread PCS 5* Nipple with male thread Nito 5753 For quick and safe hose connections for indoor and outdoor use. Made of brass with O-ring nitrile rubber sealing for long trouble free working lives. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Dimension Unit Pack Nipple 5753 Male G3/4 thread PCS 5* Water Gun Nito 5383 Adjustable industrial model with ergonomic design. Delivered with G3/4 female thread. Temperature -30 C C. Max. working pressure 25 bar. Art.no. Description Unit Pack Water Gun 5383 PCS 1 Hose connectors 9 Accessories and spare parts Nito Rubber sealing Nito 5010, 5011, 5014 Art.no. Description Dimension Contents Unit Pack Rubber sealing 5010 For female G1/2 thread 3 pcs PAC 5* Rubber sealing 5011 For female G3/4 thread 2 pcs PAC 5* Rubber sealing 5014 For female M22 thread 3 pcs PAC 5* O-rings Nito 5016 Art.no. Description Contents Unit Pack O-rings pcs PAC 5* Dimensions ring Nito 5021 Art.no. Description Dimension Unit Pack Dimensions ring 5021 Female G1/2, M22x1 x Male G3/4 thread PCS 5* Dimensions ring Nito 5022 Art.no. Description Dimension Unit Pack Dimensions ring 5022 Female G1/2 x Male G3/4 thread PCS 5* Hose Clamp Art.no. Description Dimension Contents Unit Pack Hose Clamp Galvanized 3/8 hose, mm 2 pcs PAC 5* Hose Clamp Galvanized 1/2 hose, mm 2 pcs PAC 5* Hose Clamp Galvanized 3/4 hose, mm 2 pcs PCS 5* Hose Clamp Galvanized 1 hose, mm 2 pcs PCS 5* Hose Clamp Galvanized 11/4 hose, mm 2 pcs PAC 5* 785