Ceramic PTC Thermistor: PSB Series
|
|
- Douglas Hopkins
- 6 years ago
- Views:
Transcription
1 Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition: UL&cUL File No. E38827 VDE File No Recommended Applications Inverter Air Conditioner Part Number Code P S B H A 2 B Y PS Product Code THINKING Ceramic PTC Thermistor PS Series B Series Case Type Resistance (R 25 ) 00 0Ω Ω 0 00Ω Tolerance of R 25 M ±20% H ±25% N ±30% Y Special Curie Temperature A2 20 A3 30 Max. Voltage A4 B7 C8 40 V 270 V 380 V Structure Code 07 Case type A 0 Case type B 08 Case type C Internal Control Code Optional Suffix Y RoHS Compliant Structure and Dimensions Case Type: A Case Type: B Case Type: C 8± ± ±0.3 5±0.5.0±0.2 5± ±0.05 0±0.5 Note: The case is only typical type. Contact us if you have any requests. (Unit: mm) THINKING ELECTRONIC INDUSTRIAL CO., LTD
2 Characteristics Part No. Case Type Max. Voltage Max. Link Voltage Zero-power Resistance at 25 Curie Temperature Heat Capacity Max Non-operating Energy at 60 Safety Approvals V max (V ac ) V Lmax (V dc ) R 25 (Ω) Tc ( ) Cth(J/K) E Non60 (J) UL/cUL VDE PSB00 A2A407 A PSB50 A2A407 A PSB200 A2A407 A PSB220 A2A407 A PSB330 A2B707 A PSB400 A2B707 A PSB470 A2B707 A PSB680 A2B707 A PSB0 A2C807 A PSB220 A3B708 C PSB560 A3D408 C PSB0 A3E608 C PSB00 A2A40 B PSB50 A2B70 B PSB220 A2B70 B PSB330 A2B70 B PSB400 A2B70 B PSB470 A2B70 B PSB0 A2C80 B Note: is the tolerance of R 25 Application and Selection Typical application circuit V s PTC Thermistor Bulk Cap. Load Selection Select charging capacitor according to the following formula. C < 0.7x(Tc-Ta)xCthx xV 2 (Unit: uf) C: Bulk Cap. 0.7: Safety factor Tc: Curie temperature of PTC Ta: Ambient temperature V: Voltage of capacitor charging (V=.44x Vs) E Non60 =0.7x (Tc-Ta)xCth E Non60: Max Non-operating Energy at 60 (Ta= 60) THINKING ELECTRONIC INDUSTRIAL CO., LTD
3 R-T Characteristic Curve (Typical) PSB *07 series PSB *08 series Resistance ( ) :PSB0 A2B707 2:PSB680 A2B707 3:PSB470 A2B707 4:PSB400 A2B707 5:PSB330 A2B707 6:PSB220 A2A407 7:PSB50 A2A407 8:PSB00 A2A Resistance ( ) :PSB0 A3E608 2:PSB560 A3D408 3:PSB220 A3B Temperature( C) Temperature( C) Resistance ( ) PSB0 A2C80 2.PSB470 A2B70 3.PSB400 A2B70 4.PSB330 A2B70 5.PSB220 A2B70 6.PSB50 A2B70 7.PSB00 A2A40 PSB *0 series Temperature( C) THINKING ELECTRONIC INDUSTRIAL CO., LTD
4 Soldering Recommendation Wave Flow Soldering Profile Preheating Soldering Cooling 260 Max Temperature 30±20 Note 2 Note 3 Note Ta 30~90 sec. < sec. <0 sec. >60sec Time Note : (~3 )/sec 2: Approx. 200 /sec 3: 5 /sec. (Max) Recommended Reworking Conditions with Soldering Iron Item Temperature of Soldering Iron-tip Soldering Time Distance from Thermistor Conditions 360 (max.) 3 sec (max.) Do not touch the case bottom THINKING ELECTRONIC INDUSTRIAL CO., LTD
5 Reliability Test Item Standard Test conditions and Methods Specifications Robustness of Terminations IEC Gradually apply 40±0.5N and keep the unit fixed for 0± sec. Solderability IEC ±3, 2±0.5 sec At least 95% of terminal electrode is covered by new solder Resistance to Soldering Heat IEC ±3, 0± sec Vibration IEC Shock IEC Frequency range:0~55hz Amplitude:0.75mm or 98m/s 2 Direction:3 mutually perpendicular directions Duration :6hrs(3x2 hrs) Wave: half-sine V:.0m/s Acceleration:50 m/s 2 Pulse time:30ms The thermal shock conditions shown below shall be repeated 5 cycles. Rapid Change of Temperature IEC Step Temperature ( ) Period (minutes) -40 ± 5 30 ± 3 2 Room temperature 5 ± ± 5 30 ± 3 4 Room temperature 5 ± 3 Climatic Sequence IEC Dry heat:25 for 6hrs Damp heat first cycle: 40,95%R.H,cycle time:24hrs Cold: -25 for 2hrs Damp heat (cyclic), remaining cycles:5 cycles Test according to IEC Damp Heat, Steady State Endurance at Maximum Operating Temperature and Maximum Voltage Endurance for Charging of Capacitor IEC ±2,90~95%RH, 000±2hrs IEC ±5, Vmax, 000±2hrs Specification Standard Operating cycles at Vmax >00,000 cycles (charging of capacitor) THINKING ELECTRONIC INDUSTRIAL CO., LTD
6 Packaging (unit:mm) Series PSB *07 and PSB*08 Series PSB *0 Series Case type A and C B 50pcs per box 25pcs per box Quantity 30 boxes per carton 8 boxes per carton Warehouse Storage Conditions of Products Storage Conditions:. Storage Temperature: -0 ~ Relative Humidity: 75%RH 3. Keep away from corrosive atmosphere and sunlight. Period of Storage: year Usage Please keep products away from the conditions mentioned below to avoid their characteristic deterioration and failure.. Corrosive gas or deoxidizing gas(cl 2, H 2 S, NH 3, SOx, NOx etc.) 2. Place in a vacuum or put pressure 3. Salt water, oil, solvent and chemical liquid 4. Flammable gas 5. Place in splashed water, or high humidity and dewing place 6. Other places similar to any conditions mentioned above THINKING ELECTRONIC INDUSTRIAL CO., LTD
Ceramic PTC Thermistor: PSB Series
Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition:
More informationCeramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. Two resistance-matched s in a plastic housing 3. Wide resistance range in telecom area from 10 to 50Ω 4. Compliant with ITU-T standards 5. Operating temperature range: 0 ~
More informationNTC Thermistor:TTS Type
Features 1. RoHS compliant 2. Body size ψ1.6mm~ψ2.5mm 3. Radial lead resin coated 4. Long leads for easy sensor placement 5. -40 ~ +100 operating temperature range 6. Wide resistance range 7. Agency recognition:
More informationoperating current (*1) (*5) NCU18XH103F60RB 10k±1% 3380±1% Reference Only Thermal Dissipation Constant (mw/ C) (*1)
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P / 8.Part Numbering. (ex.) NC U 8 XH 03 F 60 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationPosistor for over current protection PRG SERIES BC-E0272I PRG18BC***MM1RB SERIES
Posistor for over current protection PRG SERIES BC-E0272I PRG18BC***MM1RB SERIES 1.Part Numbering ex) PR G 18 BC 1R0 M M1 RB C Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationMaximum. operating. Temperature P/N. current. Reference Only. (*1) (*5) NCU15XH103F60RC 10k±1% 3380±1% operating. Temperature P/N.
Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size P / 8.Part Numbering. (ex.) NC U 5 XH 03 F 60 RC Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationPosistor for over current protection PRG SERIES BC-E0273H PRG21BC***MM1RA SERIES
Posistor for over current protection PRG SERIES BC-E0273H PRG21BC***MM1RA SERIES 1.Part Numbering ex) PR G 21 BC 0R2 M M1 RA C Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationPosistor for over heat sensing PRF SERIES PRF15**102R SERIES
Posistor for over heat sensing PRF SERIES PRF15**102R SERIES BC-E0268D 1.Part Numbering ex) PR F 15 AR 102 R B6 RC C Product ID Series Dimensions Temperature Resistance Resistance Individual Packaging
More informationMaximum. operating. current. (*1) (*5) NCP15XH103F03RC 10k±1% 3380±1% Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size P 1 / 10 1.Part Numbering. (ex.) NC P 15 XH 103 F 03 RC Product ID Series Dimensions Temperature Resistance Resistance
More informationP/N: RGTCM H0T. Halogens Free Product. RGTCM Series 0806(3025)- RoHS Compliance THIN FILM CERAMIC COMMON MODE FILTER.
RGTCM Series 0806(3025)- RoHS Compliance THIN FILM CERAMIC COMMON MODE FILTER Halogens Free Product P/N: RGTCM0806650H0T *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationHIGH VOLTAGE RESISTOR HVR
HIGH VOLTAGE RESISTOR FEATURES Metal film technology High pulse loading capability Small size Meeting safety requirements of: UL1676 (37 and 68, range 510 KΩ ~ 11 MΩ) - pending IEC 60065 EN 60065 VDE 0860
More informationMaximum. operating. current. Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 020 size P /. Part Numbering. (ex.) NC P 03 XH 03 F 05 RL Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationPart No.: ZLMR1608 Series Specification
1. Scope This Specification is applied to the Pb free SMD Chip Ferrite bead for ZLMR1608 Series Product. 2. Part Number Code ZLMR 1608 D 121 G T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More informationMaximum. operating. current. (*1) (*5) NCP18XH103F03RB 10k±1% 3380±1% Reference Only
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P / 0.Part Numbering. (ex.) NC P 8 XH 03 F 03 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationHOS LOW OHM POWER RESISTORS. SERIES Size As per AEC-Q Open frame strip type. 2W to 5W. R001 to R05.
SERIES Open frame strip type. 2W to 5W. R1 to R5. As per AEC-Q2 PHYSICAL CONFIGURATION L W H T D Recommended PCB layout for high precision applications : Kelvin (4 terminal pad design) is suggested as
More information(a) Series code. (b) Dimension code (c) Material code. Recommended PCB Pattern. 1.0 Ref. 3.2 Ref. (b) Coating : Epoxy with magnetic powder
1. PART NO. EXPRESSION : S D S 3 0 1 0 D 1 0 0 M F (a) (b) (c) (d) (e)(f) (a) Series code (b) Dimension code (c) Material code (d) Inductance code : 100 = 10.0uH (e) Tolerance code : M = ± 20% (f) F :
More informationP/N: RBBPF C67B1U. Halogens Free Product. RBBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER
RBBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 1125 ~ 1675 MHz RF Application 50 ohm impedance with DC blocking caps in I/O pins P/N: RBBPF3225180C67B1U
More informationApplications. Note PC, Tablet PC
PTC Thermistor (Resettable Fuse) Features Applications Compact Design to save Board space Low profile High Reliability Less Characteristics change after mounting and energization RoHS Compliant and Halogen
More informationPTC thermistors for degaussing
PTC thermistors for degaussing Series/Type: B59*** Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationData Sheet FTN Series
NTC Thermistor (Flat Thin head Insulated Temperature Sensor) FTN18XH 103F01RT FTN18WF 104F01RT Features Insulation by resin mold Strong for mechanical stress Quick response time Low profile Flip chip mounting
More informationPosistor for over heat sensing PRF SERIES BC-E0240G PRF18**471R SERIES
Posistor for over heat sensing PRF SERIES BC-E0240G PRF18**471R SERIES 1.Part Numbering ex) PR F 18 BB 471 R B5 RB C Product ID Series Dimensions Temperature Resistance Resistance Individual Packaging
More informationPTC thermistors for degaussing
PTC thermistors for degaussing Series/Type: B59*** Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationP/N: RFBPF C07B1U. Halogens Free Product. 1125~1675MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance
RFBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 1125~1675MHz Band Application P/N: RFBPF3225180C07B1U *Contents in this sheet are subject to change without
More informationP 2 / Resistance - Temperature Characteristic (typical curve) : AR 1000 Resistance e Charac(R/R25)
P 1 / Posistor For Circuit Protection 1. Part Numbering (Part Number) PT GL 09 AR 390 N 0B52 A0 Product ID Series Dimensions Temperature Characteristics Resistance Resistance Tolerance Individual Specifications
More informationMMP - Metal Film MELF
Specifications Per IEC 60115-1, IEC 60115-2 EN140401-803 B L D Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high
More informationP 2 / 6 3.Dimensions 1.6± Quantity (Standard Quantity) 0.8± ~ ~ ±0.15 Products quantity in a reel 4,000 pcs./1 reel 1.The
Chip NTC Thermistor for temperature sensor and temperature compensation 0603 size P 1 / 6 1.Part Numbering. (ex.) NC U 18 XH 103 F 60 RB Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationDATA SHEET Metal Element Current Sensing Chip Resistor CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This
More information(1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. Equivalent circuit. No Polarity
(1) SHAPES AND DIMENSIONS B C D A : 2.2 ± 0.2 B : 1.45 ± 0.2 E C : 1.30 ± 0.15 D : 0.65± 0.25 A F E : 0.44 ± 0.1 F : 1.15 ± 0.1 E G : 1.27± 0.1 G Terminal Terminal wraparound : Approx. 0.38 both ends Equivalent
More informationChip NTC Thermistor for temperature sensor and temperature compensation 0805 size
P 1 / 6 Chip NTC Thermistor for temperature sensor and temperature compensation 0805 size 1. Part Numbering (ex.) NC P 21 XV 103 J 03 RA Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationP/N: RFBPF Y07B1U. Halogens Free Product. 475~675 MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance
RFBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 475~675 MHz Band Application P/N: RFBPF3225200Y07B1U *Contents in this sheet are subject to change without
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Low-Inductance X5R / X7R
Product Specification November 21, 2016 V.1 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS - X5R / X7R 6.3 V TO 50 V 10 nf to 1 uf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationSCT500H Twin SMD Ceramic PTC Thermistor
Descriptions The component consists of two high-performance ceramic PTCs mounted in a lead-frame for (SMD) direct soldering on a printed-circuit board (PCB) or substrate. The ceramic PTCs are soldered
More informationLM1235HP Series SMD Power Choke Coil
1. PART NO. EXPRESSION : LM 1 5 H P 1 R M F - (a) (b) (c) (d) (e)(f) (g) (a) Series code (b) Dimension code (c) Type code (d) Inductance code : 1R = 1.uH (e) Tolerance code : M = ± %, Y = ± % (f) F : RoHS
More informationINDEX. NTC Thermistor SCK Type Edition:SCK200512MSY-KB Page 1. Part Number Code. Structure and Dimensions. Electrical Characteristics
NTC Thermistor SCK Type Edition:SCK200512MSY-KB080704 INDEX Part Number Code Structure and Dimensions Electrical Characteristics Reliability Soldering Recommendation Power Derating Curve RoHS Compliant
More informationAnti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Re sis tors Type: ERJ PA2, P3, PA3, P6, P8, P14 Features ESD surge characteristics superior to standard metal fi lm resistors High reliability Metal glaze thick fi lm resistive
More informationP 2 / 1000 Resistance - Temperature Charac Range AR Charac 100 Resista ance Change (R/R25)
P 1 / Posistor For Circuit Protection 1. Part Numbering (Part Number) PT GL 05 AR 151 H 8P52 B0 Product ID Series Dimensions Temperature Characteristics Resistance Resistance Tolerance Individual Specifications
More informationTesting Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current Capability P
Application Notes Testing Procedures SMD Soldering Recommendations 57 Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current
More informationChip NTC Thermistor for temperature sensor and temperature compensation 0402 size
P 1 / 8 Chip NTC Thermistor for temperature sensor and temperature compensation 0402 size 1. Part Numbering 2.Ratings 2.1 F SERIES (ex.) NC P 15 XH 103 J 03 RC Product ID Series Dimensions Temperature
More informationType RQ73 1E RQ73 1J RQ73 2A RQ73 2B Size Resistance tolerance ±0.1% Resistance Range 40R ~ 35K 40R ~ 130K 10R ~ 350K 10R ~1M0
Key Features Type RQ73 Series SMD TaN Thin film resistor Special passivation layer on resistive element AEC-Q200 qualified Sulfur resistant (per ASTM B809-95 humid vapor test) RoHS Compliant TE Connectivity
More informationIWLSeries FEATURES APPLICATIONS ORDERING CODE. SMD Wirewound Chip Ferrite Open-Type Inductors (Low Profile) 0805 TRIGON COMPONENTS
SMD Wirewound Chip Ferrite Open-Type s (Low Profile) 0805 CONFIGURATIONS: FEATURES Size Smaller, Lower profile Higher Efficiency due to the lower loss Higher current in compact size Customer design is
More informationCeramic ESD Protection Device LXES15GAA1-155 For Automotive
Ceramic ESD Protection Device LXES15AA1-155 For Automotive 1. This specification shall be applied to the ESD Protection Device. p1/15 LXES15AA1-155 ( car accessory, Vehicle interior ) 2. Part Number Configuration
More informationAMOTECH SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S July 3, 2001 MULTILAYER CHIP VARISTOR SHEET 1/6 DESIGNED CHECKED APPROVED
SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S 02 050 July 3, 2001 CO., LTD. 17-2, JAMWON-DONG, SEOCHO-GU, SEOUL, KOREA TEL : 82-2-544-1351 FAX : 82-2-517-7183 DESIGNED CHECKED APPROVED MULTILAYER
More informationMULTILAYER CERAMIC BAND PASS FILTER
RFBPF Series 2520(1008) - RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER 2.4 GHz ISM Band Working Frequency P/N: RFBPF2520080AUT *Contents in this sheet are subject to change without prior notice.
More informationReference Only. DC Resistance Impedance at 100MHz (mω) Rated Current *1 MURATA (A) Part Number. (Ω) Tolerance Typ. Max.
Spec No. JENF243J-0002B-01 P1/8 CHIP NOISE FILTER NFZ2MSM SN10L REFERENCE SPECIFICATION 1. Scope This reference specification applies to NFZ2MSM_SN10L, Chip Noise Filter.. 2. Part Numbering (ex) NF Z 2M
More information2.4 GHz ISM Band Working Frequency
MULTILAYER CERAMIC ANTENNA RFANT Series RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT3216120A1T Series *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_RFANT3216120A1T_V04
More informationCeramic ESD Protection Device LXES**A series Document No. LX Rev1.0
Ceramic ESD Protection Device LXES**A series Document No. LX 1-1111 Rev1.0 1. This specification shall be applied to the ESD Protection Device. p1/18 LXES03AAA1-098 LXES15AAA1-117 LXES15AAA1-153 LXES03AAA1-154
More informationDisc Type NTC Thermistors
Disc Type NTC Thermistors Type: ERTD The ÒType ERTDÓ are disc type negative temperature coefficient thermistors. Resistances are available from 8 W to 150 kw and B Values are from 3000 K to 5000 K. The
More informationYour Perfect Inductor Ver Multilayer Ferrite Chip Inductor (FL SERIES) FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS FEATURE
Multilayer Ferrite Chip Inductor (FL SERIES) FEATURE 1. Monolithic structure for high reliability 2. Dimensions are unified for automatic mounting 3. Closed magnetic circuit avoids crosstalk and is suitable
More informationMULTILAYER CERAMIC BAND PASS FILTER - Balanced Type
RFBPB Series 2012(0805)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBPB2012090AM8T62 *Contents in this sheet are
More informationReference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L
SpecNo.JENF243J-0011A-01 P1/10 CHIP NOISE FILTER NFZ5BBW LN10 REFERENCE SPECIFICATION 1.Scope This reference specification applies to NFZ5BBW_LN10L Series, Chip Noise Filter. 2.Part Numbering (ex) NF Z
More informationThick Film Chip Resistors
Thick Film Chip Resistors Type: ER XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features Small size and lightweight High reliability Metal glaze thick fi lm resistive element and three layers of electrodes
More informationChip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
More informationBROADBAND RFCMF 1220(0508) Series RoHS Compliance MULTILAYER COMMON MODE FILTER. For USB 2.0 / IEEE 1394 Application
BROADBAND RFCMF 1220(0508) Series RoHS Compliance MULTILAYER COMMON MODE FILTER Halogens Free Product For USB 2.0 / IEEE 1394 Application P/N: RFCMF1220100M4T *Contents in this sheet are subject to change
More informationP/N: RFBPB A9T. RFBPB 2012(0805) Series RoHS Compliance. MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type. 2.4 GHz ISM Band Working Frequency
RFBPB 2012(0805) Series RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBPB2012090A9T *Contents in this sheet are subject
More informationSUPERWORLD ELECTRONICS (S) PTE LTD PG. 1
1. PART NO. EXPRESSION : P I C 0 5 1 5 H P 1 R 0 M F - (a) (b) (c) (d) (e)(f) (g) 2. CONFIGURATION & DIMENSIONS : (a) Series code (b) Dimension code (c) Type code (d) Inductance code : = 1.0uH (e) Tolerance
More informationSUPERWORLD ELECTRONICS (S) PTE LTD PG. 1
1. PART NO. EXPRESSION : P I C 0 6 1 5 H 1 R 0 M F - (a) (b) (c) (d) (e)(f) (g) 2. CONFIGURATION & DIMENSIONS : (a) Series code (b) Dimension code (c) Type code (d) Inductance code : = 1.0uH (e) Tolerance
More informationSUPERWORLD ELECTRONICS (S) PTE LTD
1. PART NO. EXPRESSION : P I C 0 3 1 5 H 2 R 2 M F - (a) (b) (c) (d) (e)(f) (g) 2. CONFIGURATION & DIMENSIONS : (a) Series code (b) Dimension code (c) Type code (d) Inductance code : 2R2 = uh (e) Tolerance
More informationP/N: RGCMF H4T. RGCMF Series 1210(0504)- RoHS Compliance MULTILAYER CERAMIC COMMON MODE FILTER. Halogens Free Product.
RGCMF Series 1210(0504)- RoHS Compliance MULTILAYER CERAMIC COMMON MODE FILTER Halogens Free Product P/N: RGCMF1210121H4T *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationFerrite Chip Inductor(Lead Free)
Ferrite Chip Inductor(Lead Free) FCI- Series P1. 1. Features 1.Monolithic inorganic material construction. 2.Closed magnetic circuit avoids crosstalk. 3.S.M.T. type. 4.Suitable for flow and reflow soldering.
More informationMetal Film Leaded Precision Resistor-MFR Series
Metal Film Leaded Precision ResistorMFR Series Construction 5 6 1 2 3 4 7 d D L H 1 Insulation Coating (Expose resin) 5 Resistor Layer (Nickel alloy) 2 Trimming Line 6 Marking (Expose) 3 Ceramic Rod (Alumina
More informationMULTILAYER CERAMIC NOTCH FILTER. RFDIP Series 1608(0603)- RoHS Compliance
MULTILAYER CERAMIC NOTCH FILTER RFDIP Series 1608(0603)- RoHS Compliance Halogens Free Product 2.4 GHz & 5 GHz ISM Band Working Frequency P/N: RFDIP1608060L3T *Contents in this sheet are subject to change
More informationP/N: RFBPF A3T MULTILAYER CERAMIC BAND PASS FILTER. 2.4 GHz ISM Band Working Frequency. RFBPF Series 1608(0603)- RoHS Compliance
RFBPF Series 1608(0603)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBPF1608070A3T *Contents in this sheet are subject to change
More informationNTC thermistors for inrush current limiting
NTC thermistors for inrush current limiting Leaded and coated disks Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
More informationMULTILAYER CERAMIC NOTCH FILTER
RFDIP Series 2012(0805)- RoHS Compliance MULTILAYER CERAMIC NOTCH FILTER Halogens Free Product 2.4 GHz & 5 GHz ISM Band Working Frequency P/N: RFDIP2012050L7T *Contents in this sheet are subject to change
More information2.4 GHz ISM Band Working Frequency
RGBPB 2520(1008) Series RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type 2.4 GHz ISM Band Working Frequency P/N: RGBPB2520090A5T *Contents in this sheet are subject to change without
More informationElectrical Specifications. Mechanical Specifications. A B C D Body Length Body Diameter Lead Length (Bulk) Lead Diameter. Percent Rated Power (%) 80
Features: Non-inductive design Molded body for package uniformity Ideal for pulse-load handling characteristics RoHS compliant / lead-free ` Electrical Specifications Maximum Power Rating Maximum Dielectric
More informationNTC thermistors for inrush current limiting
NTC thermistors for inrush current limiting Leaded and coated disks Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the
More informationNTC thermistors for inrush current limiting
NTC thermistors for inrush current limiting Leaded and coated disks, insulation voltage 1000 VDC Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication,
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 62-7265 n/a 1R 2W 1% METAL FILM RESISTOR RC 62-7266 n/a 2R2 2W 1% METAL FILM RESISTOR RC 62-7267 n/a 3R3 2W 1% METAL FILM RESISTOR RC 62-7268 n/a 4R7
More informationNo.JEMCP B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM18PC Series Reference Sheet 1.Scope 2.Reference PART No. List
No.JEMCP0-0086B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM8PC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 This product specification is applied to Chip
More informationDatasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
More informationHigh Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationReference Only. Spec No. JENF243G-0003E-01 P 1 / 6
Spec No. JENF243G-0003E-01 P 1 / 6 1.Scope Ferrite Bead Inductor BL01RN1A Reference Specification This reference specification applies Ferrite Bead Inductor. 2.Part Numbering (Ex.) BL 01 RN 1 A1 F 1 A
More informationReference Only. Spec. No. JENF243D-0003J-01 P1/ 8
Spec. No. JENF243D-0003J-01 P1/ 8 Chip EMIFIL LC Combined Monolithic NFL18SP X1A3 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL18SP
More informationRF Transformer (Stabilized Matching Device) SMST18 series
1 Features RF Transformer Stabilized Matching Device is RF impedance matching component. You can adjust impedance matching easily between antenna and feeding point, when you use RF Transformer. RF Transformer
More informationP/N: RFECA A1T. Halogens Free Product. 2.4 GHz ISM Band Working Frequency. RFECA Series RoHS Compliance CERAMIC ANTENNA.
RFECA Series RoHS Compliance CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFECA32166A1T *Contents in this sheet are subject to change without prior notice. Page 1 of 9
More informationNTC Thermistors for automotive devices (chip type)
Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions The, hereafter referred to as Thermisotrs, is designed for use in automotive devices. When subjected to severe electrical,
More informationMULTILAYER CERAMIC BAND PASS FILTER
RFBPF 3225(1210) Series- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER 2.4 GHz ISM Band Working Frequency P/N: RFBPF3225150A4T *Contents in this sheet are subject to change without prior notice.
More informationMultilayer NTC Thermistors
Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions Multilayer NTC Thermistors (hereafter referred to as Thermistors ) should be used for general purpose applications found
More informationPLS NOTE THE VERSION STATED
LR Series Metall Alloy Low-Resistanc ce Docu ument No. Released Date Page No. IE-SP-022 2018/04/27 1 1 Scope: 1.1 This specification is applicable to lead free, halogen free f of RoHS directive for metal
More information5.Rated value No.JEMCP B MURATA PART NO. (3) Nominal Capacitance Capacitance Tolerance (5) Rated Voltage Rated Current (ma) DC Resistance Insul
No.JEMCP0-010871B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT NFM41PC155 Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor for Large
More informationFeatures Small size Low insertion loss High selectivity Hermetic seal. 1000MHz MHz. 1500MHz MHz. 1795MHz MHz.
SAW Filters RF SAW Filters for TDSCDMA SF15 Series (Diplex Type Dual Filter) Features Small size Low insertion loss High selectivity Hermetic seal Applications TDSCDMA How to Order SF 15 19 T A SB A1 1
More information5.Rated value. 6.Package. No.JEMCP B. Section 7.1 (-55 to 125 C / -55 to 125 C) 1000MΩmin pf NFM3DPC223R1H3L ±20 % DC 50 V
No.JEMCP0-010856B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM3DP Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor
More informationReference Only. Reference Spec. No.: JENF243H P 1/ 7. Withstanding Voltage V(DC) Rated Current A(DC) BNX
Reference Spec. No.: JENF243H-0011-01 P 1/ 7 lock Type EMIFIL NX00-11 Reference Specification 1. Scope 2. Rating This specification applies to lock Type EMIFIL. Customer Part Number Murata Part Number
More informationApplications R46 K I P0 M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
More informationNTC thermistors for temperature measurement
NTC thermistors for temperature measurement Series/Type: Date: March 2006 EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained
More informationNo.JEMCP B a)equivalent Circuit 5.Rated value MURATA PART NO. NFM2PC04RE3D (3) Nominal Capacitance Capacitance Tolerance 0. uf ±20 % (
No.JEMCP0-00865B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM2PC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 7 This product specification is applied to Chip
More information2 of 13 pages Directory 1. Outline Drawing 3/13 2. Features 3/13 3. Typical Applications 3/13 4. Specifications 3/13 5. Capacitor series code informat
1 of 13 pages Product specifications Product name CL21 Type Film Capacitor Specifications Series Parts origin China Shantou 汕头高新区松田实业有限公司 SHANTOU HIGH-NEW ZONE SONGTIAN ENTERPRISE CO., LTD Add:9,kejixi
More informationSPECIFICATIONS AND TEST METHODS
Messrs. Specification No. : JEMCP0-00869A Product Specification for Reference Issued Date : 20 FEB. 204 Part Description : Chip EMIFIL Chip 3-terminal Capacitor for Large Current for General Customer Part
More information4. Type & Dimensions No.JEMCP B (Unit:mm) MURATA PART NO. (1)-1 L a (1)-2 W b T e g d p 1 NFA31CC101S1E4D 3.2± ± ± min. 2 N
No.JEMCP0-010875B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR ARRAY TYPE FOR GENERAL NFA31CC Series Reference Sheet 1.Scope 2.Reference PART No. List 1 2 3 4 5 6 7 8 This product specification is applied to
More informationMULTILAYER CERAMIC ANTENNA
RFANT Series RoHS Compliance MULTILAYER CERAMIC ANTENNA 2.4 GHz ISM Band Working Frequency P/N: RFANT5220110A1T *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_RFANT5220110A1T_V02
More informationGeneral Purpose Chip Resistors MCMR Series
Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
More informationG M R H T B F A
High power low ohmic chip shunt resistors GMR series Features 1)High power (3W to 5W ) 2)High heat dissipation 3)Excellent TCR characterristics 4)Low ohmic (5mΩ to 220mΩ) Products list Part No. Size (mm)
More informationApplications R41 3 I M1 M
R41, Class Y2, 300 VAC, 110 C (Automotive Grade) Overview The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements
More informationXSL-375-TB-5. UV LED, TO46 with glass ball lens TECHNICAL DATA. Absolute Maximum Ratings (T a =25 C) Specifications (If=20mA, T a =25 C) Drawing
XSL-375-TB-5 TECHNICAL DATA UV LED, TO46 with glass ball lens Drawing Absolute Maximum Ratings (T a =25 C) Item Symbol Value Unit DC Forward Current I F 25 ma Peak Pulse Forward Current * 1 I FP 100 ma
More informationNo.JEMCP B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM18CC Series Reference Sheet 1.Scope 2.Reference PART No. List
No.JEMCP0-0085B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM8CC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 8 3.MURATA Part NO. System (Ex.) This product
More informationReference Only. *B:Bulk packing also available. Inductance DC Resistance ( m ohm)
P.1/9 CHIP COIL (CHIP INDUCTORS) LQM18PN FHD REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQM18PN_FH series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 18 P N 2R2
More informationThe product itself will remain within RoHS compliant version. Lens Color
Features Popular T-1 3/4 round package. Choice of various viewing angles. Available on tape and reel. Reliable and robust. UV resistant epoxy The product itself will remain within RoHS compliant version.
More information