Click here to continue >
|
|
- Nigel McDonald
- 5 years ago
- Views:
Transcription
1 Capability Matrix
2 Please click on any of the blue or green circles contained in the matrix below to progress to more specific CVI Infrared Optics capability Optical components Optical Glass Silicon Ge ZnS ZnS(M) ZnSe Chalcogenides Sapphire CaF 2 MgF 2 GaAs Lenses Beamsplitters Windows Window Assemblies Heated Window Assemblies Domes Dome Assemblies IR Detector Filters / Windows 3-6µm A/R 3-6µm L/S WP 3-6µm NBP 7-12µm A/R 7-12µm L/S WP 7-12µm NBP Metallising Detector Filters Detector Windows CVI Infrared Optics is the trading name of CVI Laser Ltd in the UK. The company is part of the IDEX Optics and Photonics Group. Strong capability Moderate capability No current capability
3 INFRARED, VISIBLE AND MULTISPECTRAL WINDOWS AND DOMES TYPES External IR windows and domes External visible windows and domes Heated window assemblies EMC screened window assemblies Dome assemblies Detector windows MATERIALS MAXIMUM DIMENSIONS Windows: up to 4mm diameter / diagonal Domes: up to 4mm diameter Optical glasses COATINGS FOR: ONGOING DEVELOPMENT Development work continues to add to CVI s range of high durability coatings, in particular to increase the salt and abrasion resistance of external surfaces. Other development activities include improvements in electrically conductive coatings and bus-barring to enhance the performance of heated window assemblies for demisting and de-icing. The company is also developing advanced masking techniques for precision placement of coatings CVI manufactures customised optical components. This datasheet is intended as a guide to our capabilities. Please contact us if your requirement is not coverered by this information. TYPICAL TOLERANCES Dimensional:.1mm Surface figure: 2 fringes power x.5 fringe irregularity Transmitted wavefront error: we have the capability of measuring at 1.6µm over a 26mm diameter aperture and 152mm dia in the visible. Parallelism: 3 arc seconds Edge thickness variation (domes):.5mm Please click on any of the symbols to proceed Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page
4 INFRARED AND MULTISPECTRAL BEAMSPLITTERS TYPES Visible reflection / IR transmission IR reflection / Visible Split laser λ from TI bands 5/5 split of a single λ or λ band MATERIALS MAXIMUM DIMENSIONS Depend on beamsplitter type. Please call CVI for further details. Optical glasses COATING TYPES CVI beamsplitters are custom designed. CVI manufactures customised optical components. This datasheet is intended as a guide to our capabilities. Please contact us if your requirement is not coverered by this information. TYPICAL TOLERANCES Dimensional:.1mm Surface figure: 2 fringes power x.5 fringe irregularity Transmitted wavefront error: we have the capability of measuring at 1.6µm over a 26mm diameter aperture and 152mm dia in the visible. Parallelism: 3 arc seconds Please click on any of the symbols to proceed Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page
5 LENSES TYPES Biconvex Plano-convex Convex-concave Meniscus Plano-concave Biconcave Spherical Aspheric Diffractive MATERIALS MAXIMUM DIMENSIONS Up to 3mm diameter COATINGS FOR: TYPICAL TOLERANCES Dimensional:.1mm Surface figure: 2 fringes power x.5 fringe irregularity Centration: 1 arc minute CVI manufactures customised optical components. This datasheet is intended as a guide to our capabilities. Please contact us if your requirement is not coverered by this information. Please click on any of the symbols to proceed Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page
6 FILTERS TYPES Long and shortwave pass filters Bandpass filters Wavelength range.7 to 2µm Edge metallising Filter assemblies MATERIALS Glass / Filter glasses MAXIMUM DIMENSIONS Typical dimensions: Up to 2mm diameter or square Metal layers for edge soldering: Gold Nickel Chrome Titanium COATING TYPES TYPICAL TOLERANCES Spectral position: ±.5% Dimensional tolerances: ±.1mm CVI manufactures customised optical components. This datasheet is intended as a guide to our capabilities. Please contact us if your requirement is not coverered by this information. Please click on any of the symbols to proceed Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page
7 TEST EQUIPMENT Zygo interferometer Smartscope MVP 3 LUPI 1.6µm laser unequal path 26mm dia aperture interferometer Spectrophotometers Humidity chamber Salt spray chamber Temperature cycling chambers Windscreen wiper test facilities LENSES WINDOWS/DOMES BEAMSPLITTERS FILTERS Smartscope MVP 3 measuring system Zygo Phase-Shifting Interferometers with Metro Pro Software: for measuring flatness and form error Perkin Elmer Spectrophotometers: for measuring spectral characteristics PRODUCTION EQUIPMENT
8 PRODUCTION EQUIPMENT Peter Wolters Polisher Lapmaster Coating chambers Thermal evaporation Electron beam deposition Ion assisted deposition Advanced plasma source Chemical vapour deposition RF Sputtering Conventional Polishing System Schneider CNC polisher Diamond Turning Machines LENSES WINDOWS/DOMES BEAMSPLITTERS FILTERS Lapmaster 48 inch Polishing Systems: for flat-polishing Peter Wolters Twin-Sided Polishing Systems: for lapping and flat-polishing large or high volume optics Schneider CNC Polishing System: for high-speed polishing of spherical surfaces Diamond-turning machines for production of aspheric and diffractive surfaces Coating Chambers: 7 chambers of various sizes and configurations for a variety of infrared and visible coating types
9 GERMANIUM Ge Germanium is a broad band infrared transmitting material. It is useful for optical components operating in the mid- and far-infrared regions MATERIAL PROPERTIES OPTICAL PROPERTIES Bulk 1.6µm <.27 cm -1 Reflection Loss at 11µm (Two surfaces) 53% Refractive Index at 11µm 4.26 Temp change in Refractive Index 3.9 x 1-4 K -1 THERMAL PROPERTIES Thermal Conductivity at 2 C W m -1 K -1 Specific Heat J Kg K -1 Thermal Expansion x 1 K -1 at 2K MECHANICAL PROPERTIES Youngs Modulus Rupture Modulus Shear Modulus noop Hardness Poisson Ratio 12.7 GPa 93 Mpa 67 GPa 78 Kg/mm.28 K -1 Ge polished window 2mm path length The above technical information is supplied as an introductory outline only. We do not recommend that this data be relied upon without independent verification of suitability.
10 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for GERMANIUM Ge All CVI Infrared Optics coatings are now radioactive-free
11 CO 44 Ge 8-12 Hard Carbon antireflection coating for Germanium 8-12µm This coating is designed for outer surface (O.S.) applications where severe environmental conditions are likely to be encountered Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which The coating will be will carried withstand out on the representative following environmental witness piece tests coated which will in the be same carried batch. out on a representative witness piece coated in the same batch. ADHESION MIL-C para ADHESION TS1888 MIL-C para para TS1888 para 5.1 HUMIDITY MIL-C para HUMIDITY 7 days TS1888 MIL-C para para days TS1888 para ABRASION windscreen ABRASION wiper windscreen wiper TS1888 (O.S) TS1888 (O.S) para para SALT FOG 24 SALT hours FOG MIL-STD-81C MIL-STD-81C para 59.1 para hours The coating will operate under conditions such as: exposed optical surfaces of hand-held or vehicle-mounted thermal imaging systems; exposed optical surfaces of airborne or naval FLIR systems; exposed window surfaces where windscreen wiper or chemical attack is to be endured. Transmission values are for a 1mm thick Germanium substrate which has been coated on one surface with CO 44 and on the second surface with CO 49 (High Efficiency coating). TRANSMISSION > 9% (average) from µm Reflection values are for a single Germanium surface coated with CO 44. REFLECTION < 3% (average) from µm
12 CO 44E Ge 8-12 Hard Carbon antireflection coating with enhanced salt resistance for Germanium 8-12µm This coating is designed for outer surface (O.S.) applications where severe environmental conditions, particularly salt spray and salt fog, are likely to be encountered Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para days TS1888 para ABRASION TS1888 (O.S.) para Windscreen wiper para SALT FOG MIL-STD-81C para days The coating is designed for such applications as: exposed optical surfaces of hand-held or vehicle-mounted thermal imaging systems; exposed optical surfaces of airborne or naval FLIR systems; exposed window surfaces where windscreen wiper or chemical attack is to be endured. Transmission values are for 1mm thick Germanium substrate which has been coated on one surface with CO 44E and on the second surface with CO 49 (High Efficiency coating). TRANSMISSION > 9% (average) from µm Reflection values are for a single germanium surface coated with CO 44. REFLECTION < 3% (average) from µm
13 CO 45EN Ge 8-12 High durability antireflection coating for Germanium 8-12µm This coating is designed for modular interface surface (M.I.S.) applications where maximum external durability is required whilst maintaining high transmission Transmission values are for a 1mm thick Germanium substrate which has been coated on both surfaces with CO 45EN. TRANSMISSION > 97% (average) from µm Reflection values are for a single Germanium surface coated with CO 45EN. REFLECTION <.5% (average) from µm (typical) Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para hours TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS 1888 para SALT FOG MIL-STD-81C para hours
14 CO 48 Ge Dual band Dual band antireflection coating for Germanium 3-5µm and 8-12µm Transmission Wavelength Wavelength µm - nm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Reflection This coating is designed for applications requiring transmission in both thermal imaging spectral bands. Transmission values are for a 1mm thick Germanium substrate which has been coated on both surfaces with CO 48 TRANSMISSION > 95% (average) from 3-5µm TRANSMISSION > % (average) from 8-12µm Reflection values are for a single Germanium surface coated with CO 48. REFLECTION < 2% (average) from 3-5µm REFLECTION < 2% (average) from 8-12µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para hours TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para SALT FOG MIL-STD-81C para hours
15 CO 49 Ge 8-12 High efficiency antireflection coating for Germanium 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with low reflection Typically used in thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para Transmission values are for a 1mm thick Germanium substrate which has been coated on both surfaces with CO 49. TRANSMISSION > % (average) from µm TRANSMISSION > % (absolute) from µm TRANSMISSION > % (average) from µm Reflection values are for a single Germanium surface coated with CO 49. REFLECTION <.9% (average) from 7.5-8µm REFLECTION <.3% (average) from µm REFLECTION < 1.3% (average) from µm ABRASION MIL-C para TS1888 para This coating is also unaffected by the following environmental tests which will be performed upon request. SALT SOLUTION MIL-C para TS1888 para TEMPERATURE CYCLE MIL-M-1358C para
16 CO 41 Ge 3-5 Hard carbon antireflection coating for Germanium 3-5µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para This coating is designed for outer surface (O.S.) applications where severe environmental conditions are likely to be encountered. Optimised for the nominal 3-5µm waveband, transmission is peaked at a specific wavelength within this band, normally specified by the end user. The coating will operate under conditions such as: exposed optical surfaces of hand-held or vehicle mounted thermal imaging systems, exposed optical surfaces of airborne or naval FLIR systems, exposed window surfaces where windscreen wiper or chemical attack is to be endured. Transmission values are for a 1mm thick Germanium substrate which has been coated on one surface with CO 41 and on the second surface with CO 429 (High Efficiency coating). TRANSMISSION > % (average) from 3-5µm TRANSMISSION > % (at peak wavelength) within 3-5µm Reflection values are for a single Germanium surface coated with CO 41. REFLECTION < 3.% (average) from 3-5µm HUMIDITY MIL-C para days TS1888 para ABRASION TS1888 (O.S) para windscreen wiper SALT Fog MIL-STD-81C para hours
17 CO 416 Ge 3. to 14.µm Broad band antireflection coating for Germanium 3. to 14.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. This coating is designed for dual band thermal imaging systems. Average Transmission 93% 3. to 13.µm Average Reflectance 4.% 3. to 13.µm Transmission values are a for a 1mm thick Germanium substrate which has been coated on two surfaces with CO416. Reflection values are for a single Germanium surface coated with CO416. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
18 CO 419 Ge 8-12 High durability antireflection coating for Germanium 8-12µm This coating is designed for modular interface surface (M.I.S.) applications where maximum durability is required whilst maintaining high transmission Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch Transmission values are for a 1mm thick Germanium substrate which has been coated on one surface with CO 419 and on the second surface with CO 49 (high efficiency coating). TRANSMISSION > % (average) from µm Reflection values are for a single Germanium surface coated with CO 419. REFLECTION <.5% (average) from µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS 1888 para TEMPERATURE CYCLE MIL-M-1358C para 4.4.4
19 CO 429 Ge 3-5µm High efficiency antireflection coating for Germanium 3. to 5.µm This coating is designed for optimum performance of thermal imaging systems in the 3. to 5.µm region Transmission % average 3. to 5.µm 93 3 Reflectance <.5% average for 3. to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
20 CO 441 Ge 7.5 to 1.5µm High efficiency antireflection coating for Germanium 7.5 to 1.5µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. 1 This coating is designed for optimum spectral performance in the 7.5 to 1.5µm region. Average Transmission.5% 7.5 to 1.5µm Average Transmission.5% 7.5 to 1.5µm Average Reflectance.3% 7.5 to 1.5µm Transmission values are a for a 1mm thick Germanium substrate which has been coated on two surfaces with CO441. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Reflection values are for a single Germanium surface coated with CO441 ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para MILD ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
21 CO 444 Ge 3.5-5µm High efficiency antireflection coating for Germanium 3.5 to 5.µm This coating is designed for systems optimised for the 3.5 to 5.µm waveband Average Transmission.5% 3.5 to 5.µm 93 3 Absolute Transmission.% 3.5 to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Average Reflectance.3% 3.5 to 5.µm Absolute Reflectance.75% 3.5 to 5.µm Transmission values are a for a 1mm thick Germanium substrate which has been coated on two surfaces with CO444. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Reflection values are for a single Germanium surface coated with CO444 ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
22 CO 49 Ge µm and 8.2 to 9.3µm Dual band antireflection coating for Germanium 3.8 to 5.µm and 8.2 to 9.3µm This coating is designed for dual band thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para T.25% Average 3.8 to 5.µm T 97.% Absolute 3.8 to 5.µm T.5% average 8.2 to 9.3µm T 97.5% absolute 8.2 to 9.3µm R < 2%(average) from 3.5µm to 5.µm R < 2%(average) from 7.5µmto 1.5µm Transmission values are a for a 1mm thick Germanium substrate which has been coated on two surfaces with CO49. Reflection values are for a single Germanium surface coated with CO49.
23 SILICON Si Silicon is a broad band infrared transmitting material. It is useful for optical components operating in the mid-infrared region MATERIAL PROPERTIES CZ 5mm FZ 5mm CZ 1mm CZ 2mm FZ 3mm Czochralski grown (CZ) Typical absorption band at 9 micron Small absorption at 5.8 micron Float Zone (FZ) Reduces these absorptions OPTICAL PROPERTIES Bulk 3µm <.1 cm -1 Reflection Loss at 5µm (Two surfaces) 46.2% Refractive Index at 5µm Change in Refractive Index with Temperature 16 x 1-6 K -1 THERMAL PROPERTIES Thermal Conductivity at C W m -1 K -1 Specific Heat J Kg K -1 Thermal Expansion 4.15 x 1-6 K -1 at 2K MECHANICAL PROPERTIES Youngs Modulus Rupture Modulus Shear Modulus noop Hardness Poisson Ratio 131 GPa 125 MPa 67 GPa 115 kgf mm.266 K -2 The above technical information is supplied as an introductory outline only. We do not recommend that this data be relied upon without independent verification of suitability.
24 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for SILICON Si All CVI Infrared Optics coatings are now radioactive-free
25 CO 344 Si 3-5 Hard Carbon antireflection coating for Silicon 3-5µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para days TS1888 para ABRASION TS1888 (O.S) para windscreen wiper SALT FOG MIL-STD-81C para hours This coating is designed for outer surface (O.S.) applications where severe environmental conditions are likely to be encountered. Optimised for the nominal 3-5µm waveband, transmission is peaked at a specific wavelength within this band, normally specified by the end user. The coating will operate under conditions such as: exposed optical surfaces of hand-held or vehicle mounted thermal imaging systems, exposed optical surfaces of airbourne airborne or naval FLIR systems, exposed window surfaces where windscreen wiper or chemical attack is to be endured. Transmission values are for a 1mm thick Silicon substrate which has been coated on one surface with CO 344 and on the second surface with CO 3429 (High Efficiency coating). TRANSMISSION > % (average) from 3-5µm TRANSMISSION > % (at peak wavelength) within the 3-5µm band Reflection values are for a single Silicon surface coated with CO 344 REFLECTION < 3.% (average) from 3-5µm This coating can be adapted to meet the spectral requirements of specific application
26 CO 3429 Si 3-5µm High efficiency antireflection coating for Silicon 3. to 5.µm This coating is designed for optimum performance of thermal imaging systems in the 3. to 5.µm region Transmission % average 3. to 5.µm 93 3 Reflectance <.5% average for 3. to 5.µm Transmission values are a for a 1mm thick Si substrate which has been coated on two surfaces with CO Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Reflection values are for a single surface coated with CO3429. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
27 CO 3435 Si 3-5 High durability antireflection coating for Silicon 3-5µm This Salt Tolerant Anti Reflection (STAR) coating is designed for use on the external surface of lenses and windows that are exposed to harsh (in particular, marine) environments, in those cases where the residual reflectance and lower transmittance of hard carbon (CO 344) is undesirable Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Coated one side with CO3435 and the other with CO3429 The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para SOLUBILITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT FOG MIL-STD-81F method 59.4 In addition the coating can be designed to match the response curve of particular detectors in order to minimise narcissus. Transmission values are for a 1mm thick Silicon substrate which has been coated on one surface with CO 3435 and on the second surface with CO 3429 (High Efficiency Coating) TRANSMISSION > 97.5% (average) from 3-5µm, or > % (average) from 3.5 5µm Reflection values are for a single Silicon surface coated with CO 3435 REFLECTANCE <.5% (average) from 3 5µm, or <.3% (average) from 3.5 5µm * Exception: this coating withstands 1 days continuous salt fog exposure without the drying steps.
28 CO 3437 Si µm Salt fog resistant antireflection coating for Silicon 3.5 to 5.µm This coating is designed for external surfaces of 3.5 to 5.µm Silicon components exposed to a salt environment Transmission % average 3.5 to 5.µm 2 Reflectance.3% average for 3.5 to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Coated one side with CO3437 and the other with CO Transmission values are a for a 1mm thick Si substrate which has been coated on one surface with CO3437 and on the second surface with CO3429. Reflection values are for a single surface coated with CO3437. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para SALT FOG 6 DAYS (<2% T LOSS) MIL-STD TEMPERATURE CYCLE MIL-C-48497A * Exception: this coating withstands 6 days continuous salt fog exposure without the drying steps.
29 CO 3444 Si 3.5-5µm High efficiency antireflection coating for Silicon 3.5 to 5.µm This coating is designed for systems optimised for the 3.5 to 5.µm waveband Reflectance.3% average 3.5 to 5.µm 93 3 Reflectance.75% absolute 3.5 to 5.µm Transmission values are a for a 1mm thick Si substrate which has been coated on two surfaces with CO Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Reflection values are for a single surface coated with CO3444. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
30 ZINC SULPHIDE / MULTISPECTRAL ZINC SULPHIDE ZnS ZnS Multispectral Transmission Spectrum 8% 5mm thick 7% ZnS Transmission Spectrum 8% 5mm thick 7% Two grades of ZnS are available for use in imaging systems and instruments. Regular grade material is grown by the chemical vapour deposition process. This material is often used in the 3 to 5µm and 8 to 12µm region. It is available in large sizes as well. 6% 5% 4% 3% 2% 6% 5% 4% 3% 2% MultiSpectral grade ZnS is treated after growth to eliminate microscopic voids and defects which occur in the Regular grade, thus extending the usefulness of this material to include the visible region. MATERIAL PROPERTIES 1% % OPTICAL PROPERTIES STANDARD MULTISPECTRAL Bulk 1.6µm _<.24 _<.2 cm -1 cm -1 Temperature Change of Refractive 1.6µm 41 x 1-5 K -1-5 Temperature Change of Refractive 54 x 1 K -1 THERMAL PROPERTIES Thermal 293K W m K W m -1 K -1 Specific Heat.469 J kg -1 K J kg -1 K -1 Linear Expansion 293K 6.8 x 1-5 K K -1 MECHANICAL PROPERTIES Young's Modulus 74.5 GPa 74.5 GPa Rupture Modulus 13 GPa 69 GPa Knoop Hardness kgf mm kgf mm -2 Density kg m 4.9 kg m -2 Poisson's Ratio The above technical information is supplied as an introductory outline only. We do not recommend that this data be relied upon without independent verification of suitability.
31 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for ZINC SULPHIDE / MULTISPECTRAL ZINC SULPHIDE ZnS All CVI Infrared Optics coatings are now radioactive-free
32 CO 224 ZnS Dual band Dual band antireflection coating for Zinc Sulphide 3-5µm and µm This coating is designed for applications requiring transmission in both thermal imaging spectral bands Transmission values are for a 2mm thick Zinc Sulphide substrate which has been coated on both surfaces with CO 224. TRANSMISSION > % (average) from 3-5µm TRANSMISSION > 95% (average) from µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Reflection values are for a single Zinc Sulphide surface coated with CO 224. REFLECTION < 2% (average) from 3-5µm REFLECTION < 2% (average) from µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para
33 CO 224E ZnS Dual band Wiper resistant dual band antireflection coating for Zinc Sulphide 3-5µm and µm An improved abrasion resistant coating for external surfaces, offering high transmission in both thermal imaging spectral bands The specification is similar to that of CO 224, except that this coating offers windscreen wiper resistance Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para Transmission values are for a 1mm thick Zinc Sulphide substrate which has been coated with on one surface with CO 224E and on the second surface with CO 224. TRANSMISSION > 95% (average) from 3-5µm TRANSMISSION > 95% (average) from µm Reflection values are for a single Zinc Sulphide surface coated with CO 224E. REFLECTION < 3% (average) from 3-5µm REFLECTION < 2% (average) from µm HUMIDITY MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para WIPER ABRASION TS1888 para wipes
34 CO 227 ZnS 3-5 High efficiency antireflection coating for Zinc Sulphide 3-5µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with low reflection Typically used in thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch Transmission values are for a 2mm thick Zinc Sulphide substrate which has been coated on both surfaces with CO 227. TRANSMISSION > % (average) from 3.2-5µm Reflection values are for a single Zinc Sulphide surface coated with CO 227. REFLECTION <.5% (average) from 3.2-5µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
35 CO 229 ZnS 8-12 High efficiency antireflection coating for Zinc Sulphide µm This coating is designed to maximise transmission for applications in the thermal spectral band Transmission values are for a 1mm thick Zinc Sulphide substrate which has been coated on both surfaces with CO 229. TRANSMISSION > 97% (average) from µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Reflection values are for a single Zinc Sulphide surface coated with CO 229. REFLECTION <.5% (average) from µm The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
36 CO 2214EN ZnS 8-12 Rain rain erosion resistant resitant antireflection coating for Zinc Sulphide 8-12µm Transmission Wavelength 95 µm Typical spectral performance. Measured at Wavelength angle of incidence - nm and at 2 C on a 1mm thick witness piece. The ENVIRONMENTAL coating will withstand PERFORMANCE the following environmental tests which The coating will be will carried withstand out on the a representative following environmental witness piece tests coated which will in the be same carried batch. out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 ADHESION MIL-C para HUMIDITY MIL-C para TS1888 para 5.1 TS1888 para HUMIDITY MIL-C para SALT SOLUTION MIL-C para TS1888 para TS1888 para SALT SOLUTION MIL-C para WIPER ABRASION TS1888 para TS1888 para wipes WIPER ABRASION TS1888 para Rain 5 wipes Erosion Resistance TRANSMISSION LOSS < 4% (average) from µm Rain Erosion Resistance Under the following test conditions: TRANSMISSION LOSS < 4% (average) from µm PERIOD Under the OF following EROSION: test conditions: 1 hour RAIN DROPS: 2mm mean diameter PERIOD OF EROSION: 1 hour IMPACT ANGLE: 6 to the surface RAIN DROPS: 2mm mean diameter SPEED: 5 mph/223 m/s IMPACT ANGLE: 6 to the surface RATE OF RAIN: 25mm/hour SPEED: 5 mph/223 m/s RATE OF RAIN: 25mm/hour Reflection An improved rain erosion resistant coating for external surfaces, offering high transmission in the 8-12µm waveband. It is particularly suitable for dome applications, where the same coating is applied to both faces. Transmission values are for a 6mm thick Zinc Sulphide substrate which has been coated on both surfaces with CO 2214EN. TRANSMISSION > 91% (average) from µm TRANSMISSION 87% (absolute) from µm TRANSMISSION > 73% (average) from µm TRANSMISSION > 65% (absolute) from µm
37 CO 222E Multispectral ZnS.45 to.65µm and 8. to 11.5µm Visible / Longwave IR antireflection coating for Multispectral ZnS.45 to.65µm and 8. to 11.5µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. This coating is designed for external surfaces of multispectral Zinc Sulphide components facing harsh environments and operating and both the visible and long wave infrared wavebands. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para WIPER TS Ave Transmission 9.%.45 to.65µm Ave Transmission.% 8. to 11.5µm
38 CO 2229 ZnS 3-5µm High efficiency antireflection coating for Zinc Sulphide 3. to 5.µm This coating is designed for optimum performance of thermal imaging systems in the 3. to 5.µm region Transmission % average 3. to 5.µm 93 3 Reflectance.5% average for 3. to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Transmission values are a for a 1mm thick Germanium substrate which has been coated on two surfaces with CO2229. Reflection values are for a single Germanium surface coated with CO2229. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
39 CO 2244 ZnS 3.5-5µm High efficiency antireflection coating for Zinc Sulphide 3.5 to 5.µm This coating is designed for systems optimised for the 3.5 to 5.µm waveband Transmission.5% Average 3.5 to 5.µm Transmission.% Absolute 3.5 to 5.µm Reflectance.3% Average 3.5 to 5.µm Reflectance.75% Absolute 3.5 to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Transmission values are for a 1mm thick Zinc Sulphide substrate which has been coated on two surfaces with CO2244. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Reflection values are for a single surface coated with CO2244. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
40 CO 229 Multispectral ZnS µm and 8.2 to 9.3µm Dual band antireflection coating for Multispectral Zinc Sulphide 3.8 to 5.µm and 8.2 to 9.3µm This coating is designed for dual band thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para Ave Transmission.25% 3.8 to 5.µm Abs Transmission 97.% 3.8 to 5.µm Ave Transmission.5% 8.2 to 9.3µm Abs Transmission 97.5.% 8.2 to 9.3µm Reflection < 2%(average) from 3.5µm to 5.µm Reflection < 2%(average) from 7.5µmto 1.5µm Transmission values are a for a 1mm thick Zinc Sulphide substrate which has been coated on two surfaces with CO229. Reflection values are for a single surface coated with CO229.
41 ZINC SELENIDE ZnSe Zinc Selenide is used for its very broad transmission range and low absorption, from the visible through to the far Infrared. Since it is a toxic material, processing and handling are subject to strict procedures 8% 1mm thick MATERIAL PROPERTIES 7% 6% 5% 4% 3% 2% 1% OPTICAL PROPERTIES Bulk Absorption 1.6µm _<.5 cm -1 Temperature Change of Refractive 1.6µm 61 x 1-5 K -1 THERMAL PROPERTIES Thermal Conductivity W m K -1 Specific Heat J kg K -1 Linear Expansion 2 C x 1 K -1 ZnSe Transmission Spectrum MECHANICAL PROPERTIES Young's Modulus Rupture Modulus noop Hardness ensity Poisson's Ratio 67.2 GPa 55 GPa kgf mm 527 kg m.28-2 K -2 D The above technical information is supplied as an introductory outline only. We do not recommend that this data be relied upon without independent verification of suitability.
42 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for ZINC SELENIDE ZnSe All CVI Infrared Optics coatings are now radioactive-free -
43 CO 244 ZnSe Dual band Dual band antireflection coating for Zinc Selenide 3-5µm and 8-12µm This coating is designed for applications requiring transmission in both thermal imaging spectral bands Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch Transmission values are for a 2mm thick Zinc Selenide substrate which has been coated on both surfaces with CO 244. TRANSMISSION > 95% (average) from 3-5µm TRANSMISSION > % (average) from 8-12µm Reflection values are for a single Zinc Selenide surface coated with CO 244. REFLECTION < 2% (average) from 3-5µm REFLECTION < 2% (average) from 8-12µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para
44 CO 244E ZnSe Dual band Wiper resistant dual band antireflection coating for Zinc Selenide 3-5µm and 8-12µm An improved abrasion resistant coating for external surfaces, offering high transmission in both thermal imaging spectral bands The specification is similar to that of CO 244, except that this coating offers windscreen wiper resistance Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para Transmission values are for a 2mm thick Zinc Selenide substrate which has been coated on one surface with CO 244E and on the second surface with CO 244. TRANSMISSION > 95% (average) from 3-5µm TRANSMISSION > % (average) from 8-12µm Reflection values are for a single Zinc Selenide surface coated with CO 244E. REFLECTION < 2% (average) from 3-5µm REFLECTION < 2% (average) from 8-12µm HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para WIPER ABRASION TS1888 para wipes
45 CO 249 ZnSe 8-12 High efficiency antireflection coating for Zinc Selenide 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with minimum reflection Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para Typically used in thermal imaging systems. Transmission values are for a 1mm thick Zinc Selenide substrate which has been coated on both surfaces with CO 249. TRANSMISSION > % (average) from 8-12µm Reflection values are from a single Zinc Selenide surface coated with CO 249. REFLECTION <.5% (average) from 8-11µm HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para This coating is also unaffected by the following environmental tests which will be performed upon request. SALT SOLUTION MIL-C para TS1888 para TEMPERATURE CYCLE MIL-M-1358C para
46 CO 241 ZnSe 8. to 17.µm Broad band antireflection coating for Zinc Selenide 8. to 17.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. This coating is designed for ultra broad band longwave infrared performance. T 9.% average 8. to 15µm T 88.% average 8. to 17µm Transmission values are for a 1mm thick ZnSe substrate which has been coated on two surfaces with CO241. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
47 CO 2411 ZnSe 8-12 Antinarcissus antireflection coating for Zinc Selenide 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with extremely low reflection Typically used in thermal imaging systems. The coating does not transmit in the visible part of the spectrum and does not therefore facilitate laser alignment Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 Transmission values are for a 1mm thick Zinc Selenide substrate which has been coated on both surfaces with CO TRANSMISSION > % (average) from µm TRANSMISSION > % (absolute) from µm Reflection values are for a single Zinc Selenide surface coated with CO REFLECTION <.3% (average) from µm REFLECTION <.2% (average weighted to typical system response) from µm HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para SALT SOLUTION MIL-C para TS1888 para
48 CO 2429 ZnSe 3-5µm High efficiency antireflection coating for Zinc Selenide 3. to 5.µm This coating is designed for optimum performance of thermal imaging systems in the 3. to 5.µm region Transmission % average 3. to 5.µm 93 3 Reflectance <.5% average for 3. to 5.µm Transmission values are a for a 1mm thick ZnSe substrate which has been coated on two surfaces with CO Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Reflection values are for a single surface coated with CO2429. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
49 CO 2444 ZnSe High efficiency antireflection coating for Zinc Selenide 3.5 to 5.µm This coating is designed for systems optimised for the 3.5 to 5.µm waveband Transmission.5% Average 3.5 to 5.µm Transmission.% Absolute 3.5 to 5.µm Reflectance.3% Average 3.5 to 5.µm Reflectance.75% Absolute 3.5 to 5.µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Transmission values are a for a 1mm thick ZnSe substrate which has been coated on two surfaces with CO2444. Reflection values are for a single surface coated with CO2444. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
50 CO 249 ZnSe µm and 8.2 to 9.3µm Dual band antireflection coating for Multispectral Zinc Selenide 3.8 to 5.µm and 8.2 to 9.3µm This coating is designed for dual band thermal imaging systems T.25% Average 3.8 to 5.µm T 97.% Absolute 3.8 to 5.µm T.5% average 8.2 to 9.3µm T 97.5.% absolute 8.2 to 9.3µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
51 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for OPTICAL GLASS All CVI Infrared Optics coatings are now radioactive-free
52 Visible Conductive Coating CO CCO1 Without Anti-reflection coating CO CCO2 Including Anti-reflection coating 1% 15Ω/sq CCO2 on BK7 This coating is designed to have high conductivity and transmission over the.4-1.2µm range. It is suitable for use in aircraft instrumentation windows, CRT displays, anti-static, heating and EMC screening applications and LCD displays. 8% 6% 4% 2% Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Spectral performance of a typical coating is shown below. (NB. No anti-reflection coating on back surface). Ω/sq %T on 1mm thick BK7 CC1 CC The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Adhesion MIL-C para Humidity MIL-C Para Abrasion MIL-C Para Salt Solution MIL-C Para ELECTRICAL PERFORMANCE Sheet resistance in the range 1 ΩΩ to 5 ΩΩ per square can be achieved with tolerances of 1 to 15%, depending on resistivity requirements. This is achieved by varying the thickness of the Indium Tin Oxide (ITO) layer. The optical performance can then be achieved by adjusting the design of the anti-reflection coating.>? BUSBARS We can also provide busbar technology, required for Electromagnetic Interference (EMI) and heating applications. EMC SCREENING PROPERTIES Ω/sq Shielding effectiveness (3-1MHz) 1 15dB 2 36dB 1 42dB This coating to can be adapted to meet the specific spectral requirements of specific applications.
53 CO OM12 Wideband IR mirror for oblique incidence 1% 99% % 97% % 95% % 93% % 91% 9% Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. This coating is designed to retain high reflectivity in the IR over a wide angular range. The mirror uses gold as the medium for high reflectivity, and the protective overlayers have been chosen so as to eliminate the reflectivity problems suffered by conventional protected mirrors when used in the IR at oblique incidence. Measured at 45 angle of incidence REFLECTION >% (average) 3-5µm REFLECTION >% (average) 8-12µm The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
54 Heating / De-frosting & EMC Shielding Windows CVI has the capability to offer de-misting/defrosting windows by means of heating. This is typically used in systems that are likely to encounter variances in temperature or weather conditions. There are two different ways of heating a window: Direct By using the bulk resistivity of Semiconductor materials such as Germanium and Silicon, a current can be passed directly through the material by means of busbar technology. Busbars can be manufactured to fit most thicknesses of window. Indirect Indirect heating is suitable for use where non-conducting materials are required in a system such as Zinc Sulphide. Heating can be achieved using insulated foil heaters. Foil heaters can be manufactured to a minimum width of approx. 6mm. POWER REQUIREMENTS It is best to consider requirements for a system at an early stage. This way, CVI can offer advice on the power required and the best method for delivering heat into a window. Options to consider would be whether a current limiter or temperature control are required. Current/Voltage combinations should also be considered. As each individual system has different requirements, we would recommend discussing your requirements with us prior to finalising design.
55 CO 521 Standard visible antireflection coating on glass This coating is designed to combine high visual transmission with low reflection. Three versions of the coating cover the refractive index range 1.46 to Average reflection per coating.5% 42-7nm Wavelength nm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
56 CO 528 Broadband antireflection coating on glass This coating is designed to combined to give low reflectivity in the visible, Near IR and 164nm laser wavelength. Three versions of the coating cover the refractive index range 1.46 to Average reflection per coating <.75% 45 to 11nm Reflection at 164nm <.5% Wavelength nm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Alternatively:- Average Reflection per coating <.5% 45 to 65 nm Reflection at 164nm <.5% ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
57 CO 521 Fused Silica µm High efficiency antireflection coating for Fused Silica 1.2 to 2.4µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. 1 This coating is designed for optimum spectral performance in the 1.2 to 2.4µm region. T.% average 1.2 to 2.4µm The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
58 CO 524E Glass.45 to.75µm and 1.543µm High efficiency antireflection coating for Glass.45 to.75µm and 1.543µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. CO524E on one surface and CO524 on the other This coating is designed for optimum visible and laser performance in the.45 to.75µm and 1.543µm regions. CO524E on one surface and CO524 on the other. T 97.5% absolute.45 to.75µm T.% absolute.45 to.75µm T 93.% absolute 1.543µm R 1.8% average for.45 to.75µm (two surfaces) The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para SALT FOG [24HRS] MIL-STD
59 CC21 Glass.425 to.7µm and 1.643µm Conductive coating with antireflective overcoat for Glass.425 to.7µm and 1.643µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. This coating is designed for optimum conductivity whilst maximising transmission in the visible and NIR regions. T 88.% average.425 to.7µm T 9.% absolute at 1.64µm CONDUCTIVITY 2 to 3ohm/sq The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
60 CHALCOGENIDE GLASSES CVI can polish and coat many of the proprietary Chacogenide Glasses on the market. For material characteristics, see the manufacturers websites. The following sites contain useful information:
61 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for CHALCOGENIDE GLASS All CVI Infrared Optics coatings are now radioactive-free
62 TM CO 251 AMTIR 8-12 High efficiency antireflection coating on for Chalcogenide Glasses 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with minimum reflection Typically used in thermal imaging systems. Transmission values are for a 1mm thick AMTIR TM substrate which has been coated on both surfaces with CO 251. TRANSMISSION > % (average) from µm Reflection values are from a single AMTIR TM surface coated with CO 251. REFLECTION _<.4% (average) from µm Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
63 TM CO 269 GASIR 8-12 High efficiency antireflection coating on GASIR TM 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with minimum reflection Typically used in thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch Transmission values are for a 1mm thick GASIR TM substrate which has been coated on both surfaces with CO 269. TRANSMISSION > % (average) from µm Reflection values are from a single GASIR TM surface coated with CO 269. REFLECTION <.4% (average) from µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
64 GALLIUM ARSENIDE GaAs Gallium Arsenide is used in some far infrared applications where its refractive index, light weight and relative strength, compared with some other IR materials, can be of benefit. Since it is a toxic material, processing and handling are subject to strict procedures MATERIAL PROPERTIES OPTICAL PROPERTIES UNITS Bulk 1.33µm -1 <.1 cm Reflection Loss at 1.33µm (Two surfaces) 44% Refractive Index at 1.33µm Change in Refractive Index with Temperature (dn/dt) 14.7 x 1-3 K -1 THERMAL PROPERTIES Thermal Conductivity at 2 C W m K -1 at 273K Specific Heat 36 J kg -1 K -1 Thermal Expansion x 1 K -1 at 3K MECHANICAL PROPERTIES Youngs Modulus Rupture Modulus Shear Modulus noop Hardness Poisson Ratio 84.8 GPa 7.34 MPa GPa 75 kgf mm.31 K -1 The above technical information is supplied as an introductory outline only. We do not recommend that this data be relied upon without independent verification of suitability.
65 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page Coatings for GALLIUM ARSENIDE GaAs All CVI Infrared Optics coatings are now radioactive-free
66 CO 329 GaAs 8-12 High efficiency antireflection coating for Gallium Arsenide 8-12µm This coating is designed for internal surface (I.S.) applications and offers maximum transmission combined with low reflection Typically used in thermal imaging systems Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. Transmission values are for a 1mm thick GaAs substrate which has been coated on both surfaces with CO 329 TRANSMISSION > % (average) from µm Reflection values are for a single GaAs surface coated with CO 329 REFLECTION <.5% (average) from µm ADHESION MIL-C para TS1888 para 5.1 HUMIDITY MIL-C para TS1888 para ABRASION MIL-C para TS1888 para 5.4.1
67 CO 3229 GaAs 3-5µm High efficiency antireflection coating for Gallium Arsenide 3. to 5.µm This coating is designed for optimum performance of thermal imaging systems in the 3. to 5.µm region Transmission % average 3. to 5.µm 93 3 Reflectance <.5% average for 3. to 5.µm Transmission values are a for a 1mm thick GaAs substrate which has been coated on two surfaces with CO Typical spectral performance. Measured at angle of incidence and at 2 C on a 1mm thick witness piece. Reflection values are for a single surface coated with CO3229. The coating will withstand the following environmental tests which will be carried out on a representative witness piece coated in the same batch. ADHESION MIL-C-48497A para HUMIDITY MIL-C-48497A para SEVERE ABRASION MIL-C-48497A para SOLUBILITY & CLEANABILITY MIL-C-48497A para SALT SOLUTION MIL-C-48497A para WATER SOLUTION MIL-C-48497A para TEMPERATURE CYCLE MIL-C-48497A para
68 Please click on any of the symbols to select a coating Alternatively you can click on the Next page icon at the bottom of screen to scroll through our capabilities page by page FILTER DESIGN All CVI Infrared Optics coatings are now radioactive-free
About us. Capabilities
Catalog 215 Content About us... 2 Capabilities... 2 Anti-reflection coatings... 4 High reflection coatings... 5 Beamsplitter coatings... 6 Filter coatings... 7 Multiband precision filters... 8 DLC coatings...
More informationUnderstanding Optical Coatings For Military Applications
Understanding Optical Coatings For Military Applications By Trey Turner, Chief Technology Officer, REO Virtually all optical components used in military applications, such as target designation, rangefinding
More informationPrecision Optical Engineering
Precision Optical Engineering Products: Prisms Windows Mirrors Flats and Master angles Sight Glasses Key Features: Prisms (Contacted, Cemented, AR coated, Mounted) Windows (Flat, wedged, curved, drilled,
More informationCoatings. Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition. Coatings on Optical Fibers
Anti-Reflection Custom Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition Anti-Reflection on Optical Fibers OptoSigma supplies a wide selection of optical
More informationPLEIGER LASEROPTIK COMPONENTS AND COATINGS
PLEIGER LASEROPTIK CO2-LASER COMPONENTS AND COATINGS Content Introduction 1 Infrared Material Data 2 Laser Optics Lenses, Meniscus 4 Lenses, Plano Convex 6 Windows, AR-coated 8 Silicon, Mirror / High Reflector
More informationOptical Coatings. Phone: Fax: Domostroitelnaya str St. Petersburg, Russia
The Fresnel reflection at the boundary of media with different refractive indices and interference in thin films allow the optical components reflecting and transmitting properties to be selectively and
More informationFused Silica: Bakeout to 200 C Operating Temperature -65 C to 150 C Standard Transmission Range 0.25 to 2 microns
Feedthrough Heater Crystal Sensor Baseplate Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Description A viewport, sometimes referred to as a window, is an optical component that provides
More informationHOMOSIL, HERASIL 1, 2 and 3
HOMOSIL, HERASIL 1, 2 and 3 1. GENERAL PRODUCT DESCRIPTION Heraeus HOMOSIL, HERASIL 1, 2, and 3 are optical quartz glass grades manufactured by flame fusion of natural quartz crystals. They combine excellent
More informationStandard Optics Information
INFRASIL 301, 302 1. GENERAL PRODUCT DESCRIPTION Heraeus INFRASIL 301 and 302 are optical quartz glass grades manufactured by fusion of natural quartz crystals in an electrically heated furnace. They combine
More informationA Tutorial on Infrared Optical Materials. M.R. Burgener. 7 November 2016
A Tutorial on Infrared Optical Materials M.R. Burgener 7 November 2016 Introduction Depending on the literature there are different definitions of the imaging bands within the electromagnetic spectrum.
More informationVACUUM VIEWPORTS. Introduction... I 03 KF Viewports... I 09 I 01. VACUUM / Components & Consumables
I VAUUM VIEWPORTS Introduction... I 03 KF Viewports... I 09 I I 01 Neyco manufactures a range of UHV viewports in F, ISO or KF flange styles including a variety of coatings to enhance performance. Materials
More informationOptical Coatings. Photonics 4 Luxury Coatings , Genève. Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG)
Optical Coatings Photonics 4 Luxury Coatings 21.06.2017, Genève Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG) RhySearch The Research- and Innovation Center in the Rhine Valley RhySearch
More informationFor historical reasons the range of glasses is divided into two subgroups: The crown glasses with n d. > 55 or n d
Optical Materials 1 OPTICAL GLASS Optical Glass There are a multitude of optical grade glasses available from various manufacturers worldwide. They have a wide variety of optical characteristics which
More informationCOMMERCIAL PRODUCTS GROUP. World Leader in High Performance, Ultra-Durable Thin Film Coatings
COMMERCIAL PRODUCTS GROUP Into the Future DSI was established in 1985 with a contract to develop an energy-efficient coating for halogen light bulbs. Since then, we have expanded our role in this specialized
More informationThe CVD diamond booklet
available at: www.diamond-materials.com/download Content 1. General properties of diamond... 2 2. Optical Properties... 4 Optical transparency... 4 Absorption coefficient at 10.6 µm... 5 Refractive index:
More informationMATERIALS. Silicon Wafers... J 04 J 01. MATERIALS / Inorganics & thin films guide
J MATERIALS SUBSTRATES Silicon Wafers... J 04 J J 01 MATERIALS SUBSTRATES NEYCO has a complete range of crystal substrates for a wide variety of applications, including Semiconductor, Biotechnology, Nanotechnology,
More informationVACUUM VIEWPORTS. Introduction... I 03 CF Viewports... I 09 I 01. VACUUM / Components & Consumables
I VACUUM VIEWPORTS Introduction... I 03 CF Viewports... I 09 I I 01 VACUUM VIEWPORTS Introduction Neyco manufactures a range of UHV viewports in CF, ISO or KF flange styles including a variety of coatings
More informationPotassium Titanyl Phosphate (KTP) Crystals
CASIX, Inc. Crystals Potassium Titanyl Phosphate (KTP) Crystals CASIX s KTP crystals feature high purity, low absorption at fundamental and second harmonic generation wavelengths. We supply super grade
More informationMirrors, Lenses, and IR Components
Mirrors, Lenses, and IR Components High performance optical components and coating services PLEIGER Laseroptik A benchmark for quality - CO 2 mirrors - ZnSe lenses - IR components - Coating services PLEIGER
More informationSINGLE CRYSTAL SAPPHIRE
SINGLE CRYSTAL SAPPHIRE Single Crystal Sapphire plays an everincreasingly important role as a material for high reliability Opto-Electronics today due to excellent mechanical characteristics, chemical
More informationMIRacle Single Reflection ATR: Design and Performance Features
MIRacle Single Reflection ATR: Design and Performance Features The single reflection attenuated total reflectance (ATR) accessory has become one of the most popular means of sampling for Fourier transform
More informationYour Supplier for Fused Silica
Your Supplier for Fused Silica Characteristics Our Company successfully developed synthetic fused silica SK-1300 as a result of significant improvements made by the conventional VAD (vapor-phase axial
More informationThin Films & AR Coated. Viewports. Thin Film & AR Coated. Viewports
Thin Films & AR Item Page Thin Film Coatings Introduction P 02 Kodial Zero Length with Anti-Reflective Coatings P 04 Kodial Zero Length with Anti-Reflective Coatings-Non-Magnetic P 07 Kodial Zero Length
More informationBOROFLOAT 33 & Functional Coatings: A Union of Inspiration & Quality
BOROFLOAT 33 & Functional Coatings: A Union of Inspiration & Quality The sum of its properties is what makes it unique. More than years ago, SCHOTT set up the first micro-float production line for what
More informationPRACTICAL DESIGN AND PRODOCTION OF OPTICAL THIN FILMS
PRACTICAL DESIGN AND PRODOCTION OF OPTICAL THIN FILMS RONALD R.WILLEY LexaLite International Corporation Charlevoix, Michigan Marcel Dekker, Inc. New York Basel Hong Kong Contents From the Series Editor
More informationQuartz Glass for Optics Data and Properties
Quartz Glass for Optics Data and Properties Technical Properties Internal transmission (%) Values of pure transmissions of a 10 mm thick sample for selected UV-Wavelengths. Wavelength nm Suprasil ArF/
More informationSpectrometer gratings based on direct-write e-beam lithography
Spectrometer gratings based on direct-write e-beam lithography U.D. Zeitner, T. Flügel-Paul, T. Harzendorf, M. Heusinger, E.-B. Kley Fraunhofer Institut für Angewandte Optik und Feinmechanik Jena, Germany
More informationHigh strain point glass substrate for photovoltaic solar cell
Empowering solar efficiency Module material PV200 High strain point glass substrate for photovoltaic solar cell Much less deformation in the heating process than soda-lime glass. Small variations in thermal
More informationFused silica and fused quartz: experience from GW projects
Fused silica and fused quartz: experience from GW projects K.A. Strain May 2006 contents introduction to fused silica/quartz mechanical/thermal properties polishing/flatness/stability optical properties
More informationLaser Micromachining of Bulk Substrates and Thin Films Celine Bansal
Laser Micromachining of Bulk Substrates and Thin Films Celine Bansal Oxford Lasers Ltd Moorbrook Park Didcot, Oxfordshire, OX11 7HP Tel: +44 (0) 1235 810088 www.oxfordlasers.com Outline Oxford Lasers Importance
More informationCorning HPFS 7979, 7980, 8655 Fused Silica. Optical Materials Product Information Specialty Materials Division
Corning HPFS 7979, 7980, 8655 Fused Silica Optical Materials Product Information Specialty Materials Division HPFS 7979, 7980 and 8655 Fused Silica HPFS Fused Silica glasses are known throughout the industry
More informationPELHAM RESEARCH OPTICAL L.L.C.
Specializing in Precision VUV/UV Optical Coating and Service Thank you for your interest in Pelham Research Optical (PRO), we are proud to offer our complete catalog of standard fi lters and broadband
More informationSUPER-SEALED LIQUID FLOW CELLS OPERATION AND USER MANUAL
SUPER-SEALED LIQUID FLOW CELLS OPERATION AND USER MANUAL Optimized Design for Continuous Flow Applications Rugged, heavy duty design compatible with continuous use Large IR port diameter to accommodate
More informationQuartz Glass for Optics
Shin-Etsu Quartz Products Co., Ltd. Quartz Glass for Optics Quartz has outstanding optical properties such as light transmission and has characteristics such as high purity, high resistance to heat and
More informationAttenuated Total Reflectance (ATR)
Technical Note FT-IR Spectroscopy Attenuated Total Reflectance (ATR) Key Features: Faster sampling Excellent for thick, continuous solids and liquids Saves sample preparation High quality spectral databases
More informationLASER GALVO SCANNING MIRRORS OPTOSIC SIC OPTICS FOR HIGH-END LASER PROCESSES
LASER GALVO SCANNING MIRRORS OPTOSIC SIC OPTICS FOR HIGH-END LASER PROCESSES REFLECTING PERFORMANCE We manufacture high-performance laser galvo scanning mirrors from 10mm to 500mm apertures for single
More informationBBO Crystals. Features. Broad phase-matchable second-harmonic-generation (SHG) range from nm to 2500 nm
BBO Crystals Broad phase-matchable second-harmonic-generation (SHG) range from 409.6 nm to 2500 nm Wide transparency range from 189 nm to 2600 nm High damage threshold of 10 J/cm 2 for 10 ns pulse-width
More informationoptosic+ ULTRA-HIGH PERFORMANCE NON-TOXIC & COST-EFFECTIVE OPTICS & STRUCTURES FOR THE 21st CENTURY optosic AG
optosic+ ULTRA-HIGH PERFORMANCE NON-TOXIC & COST-EFFECTIVE OPTICS & STRUCTURES FOR THE 21st CENTURY 1 SPACE AGE MATERIAL Originally developed for the space optics industry, alpha-grain sintered silicon
More informationHomogeneity of material and optical properties in HEM grown sapphire
Homogeneity of material and optical properties in HEM grown sapphire M. Stout *, D. Hibbard II-VI Optical Systems 36570 Briggs Rd., Murrieta, CA 92563 ABSTRACT Sapphire crystal boules, approximately 34
More informationPSS-3000 Sheet. Technical Design Guide. Revision Written By Date of Release. 01 Chuck Clontz March 23, 2012
PSS-3000 Sheet Technical Design Guide Revision Written By Date of Release 01 Chuck Clontz March 23, 2012 CR-39 is a registered trademark of PPG Industries Ohio, Inc. Table of Contents Product Definition...
More informationENABLE EXTREME PERFORMANCE PHOTONICS
OPTICS ENABLE EXTREME PERFORMANCE PHOTONICS Our CVD diamond has an extremely broad transmission spectrum, exceptional thermal conductivity, vastly increased component lifetime and can be engineered to
More informationAn innovative approach to coatings on large optics
An innovative approach to coatings on large optics OpTIC Strategic Conference 16 th -17 th November 2010 "Photographie: Philippe Bourgeois" CILAS - Établissement Marseille Z.I. St Mitre 15 avenue de la
More informationNEXTREMA. Glass-ceramics engineered and designed for extreme conditions
NEXTREMA Glass-ceramics engineered and designed for extreme conditions 2 Contents 4 6 8 10 15 NEXTREMA High-tech & functional design material NEXTREMA An all-round talent All materials at a glance Standard
More informationCVD Diamond Windows for Synchrotron Radiation Beamlines
CVD Diamond Windows for Synchrotron Radiation Beamlines Heinrich Blumer *, Saša Zelenika #, Jakob Ulrich *, Robin Betemps *, Lothar Schulz *, Franz Pfeiffer *, Uwe Flechsig*, Urs Ellenberger *, Christoph
More informationActive Composite Membrane Mirrors
Active Composite Membrane Mirrors William F. Hoffmann and Patrick M. Woida Steward Observatory - University of Arizona, Tucson, AZ James H. Burge Optical Sciences Center - University of Arizona, Tucson,
More informationPage 1 of 5 Welding plastics with near-ir lasers Improvements in the performance and cost-effectiveness of lasers have led to their wider use for welding thermoplastics. Increasing use of bonded plastics
More informationDielectric II-VI and IV-VI Metal Chalcogenide Thin Films in Hollow Glass Waveguides (HGWs) for Infrared Spectroscopy and Laser Delivery
Dielectric II-VI and IV-VI Metal Chalcogenide Thin Films in Hollow Glass Waveguides (HGWs) for Infrared Spectroscopy and Laser Delivery Carlos M. Bledt * a, Daniel V. Kopp a, and James A. Harrington a
More informationOptical Contacting ABSTRACT
Optical Contacting Jean-Jacques FERMÉ Société Européenne de Systèmes Optiques (SESO) 305. rue Louis Armand B.P. 55000 13792 Aix-en-Provence Cedex 3 - FRANCE Tel. + 33 442.168.504 - Fax + 33 442.168.585
More informationPRECISION MACHINING & FINISHING. Micron+ NE X T GENERATION MICRON+
PRECISION MACHINING & FINISHING NE X T GENERATION MICRON+ Toolmakers can achieve highly consistent engineered abrasive tools using, which increases productivity and dramatically improves workpiece quality.
More informationLaser Speckle Reducer LSR-3000 Series
Datasheet: LSR-3000 Series Laser Speckle Reducer LSR-3000 Series Speckle noise from a laser-based system is reduced by dynamically diffusing the laser beam. A diffuser is bonded to a thin elastic membrane,
More informationInstallation and User Guide. HATR Horizontal ATR Accessory
Installation and User Guide HATR Horizontal ATR Accessory The information in this publication is provided for reference only. All information contained in this publication is believed to be correct and
More informationVacuum Viewports. Standard Viewports. Viewports with Defined Optical Quality. Viewports with Electrical Conductive Layers.
Vacuum Viewports Standard Viewports Viewports with efined Optical Quality Viewports with Electrical Conductive ayers Special Viewports Viewports with d Socket Viewport Shutters Contents Introduction Page
More informationConductive glass (NTA glass )
Art Beam Co. Ltd. Conductive glass (NTA glass ) Nano Technology Assorted Glass Japanese Patent No. 3854985 (applied for 2001, granted 2006) Vanadate glass and its manufacturing method Patent holder: Tetsuaki
More informationCavity Filters. KIGRE, INC., 100 Marshland Road, Hilton Head, SC 29926, USA PH: FAX: Web:
Cavity Filters Kigre, Inc. s expertise in laser glass technology has led the way in the company s development of a wide range of cavity filter glass for solid-state lasers. Filters are used inside the
More information105 Micron Core Power Delivery Fibers
105 Micron Core Power Delivery Fibers Nufern's specialty multimode step-index fibers are designed for compatibility with the majority of fibercoupled, single-emitter, diode-laser packages and support the
More informationGlass Wafer. Specification
Glass Wafer Specification Glass Wafer Specification SCHOTT Thin Glass and Wafer products are the result of deep technological expertise. With a product portfolio of more than 100 optical glasses, special
More informationLOW TEMPERATURE PHOTONIC SINTERING FOR PRINTED ELECTRONICS. Dr. Saad Ahmed XENON Corporation November 19, 2015
LOW TEMPERATURE PHOTONIC SINTERING FOR PRINTED ELECTRONICS Dr. Saad Ahmed XENON Corporation November 19, 2015 Topics Introduction to Pulsed Light Photonic sintering for Printed Electronics R&D Tools for
More informationGlass Wafer. Specification
Glass Wafer Specification Glass Wafer Specification SCHOTT Thin Glass and Wafer products are the result of deep technological expertise. With a product portfolio of more than 100 optical glasses, special
More informationTable 1. Chemical and Structural Properties. About 1095 C g/cm 3 1.2W/m/K( c); 1.6W/m/K(//c)
CASTECH R NLO Crystals Beta-Barium Borate (β-bab 2 O 4 or BBO) Introduction Beta-Barium Borate (β-bab 2 O 4 or BBO), discovered and developed by FIRSM, CAS (Fujian Institute of Research on the Structure
More informationThe Benefits of a Vertically Integrated Optical Systems Supplier
The Benefits of a Vertically Integrated Optical Systems Supplier Daniel Staloff Corning Advanced Optics, 60 O Connor Rd, Fairport, NY 14450 StaloffDM@Corning.com ABSTRACT A company that specifies optical
More informationAxsys Technologies Optical Systems Cullman, AL. SPIE Presentation: Mirror Tech Days June 22, 2011
Axsys Technologies Optical Systems Cullman, AL SPIE Presentation: Mirror Tech Days June 22, 2011 1 Introduction Design and Manufacturing considerations for 0.50-1.5 meter beryllium telescopes for current
More informationEnergy-efficient glazing
Energy-efficient glazing Low-E solar reflective coatings Float glass is traditionally used in the building and automotive industries to provide both clear and tinted transparent barriers to the elements.
More informationAPPLICATIONS OF CHALCOGENIDE GLASS BULKS AND FIBRES
Journal of Optoelectronics and Advanced Materials Vol. 5, No. 5, 2003, p. 1327-1333 Invited Paper APPLICATIONS OF CHALCOGENIDE GLASS BULKS AND FIBRES X. Zhang *, H. Ma, J. Lucas UMR CNRS 6512 "Verres et
More informationProCell - Process Flow Cells Enabling continuous online spectroscopic analysis in the UV/Vis and NIR
brilliant spectroscopy ProCell - Process Flow Cells Enabling continuous online spectroscopic analysis in the UV/Vis and NIR Process flow cells for online spectroscopic analysis Reliable sampling. Process
More informationoptosic SiC optics for high-end laser processes
optosic SiC optics for high-end laser processes REFLECTING PERFORMANCE We manufacture high-performance laser galvo scanning mirrors from 10mm to 500mm apertures for single pair consumption with a range
More informationPrecision Electroforming in High-Strength NiColoy
Taking the Stress out of Electroforming www.nicoform.com Precision Electroforming in High-Strength NiColoy Copyright 2007 NiCoForm, Inc. (Rochester, NY) Electroforming What is it? What is it good for?
More informationAdditive Manufacturing of Materials. Dr Helen Swygart Qioptiq Capability Improvement Manager
Additive Manufacturing of Materials Dr Helen Swygart Qioptiq Capability Improvement Manager My Background Education (The University of Liverpool) 1 st Class Honours Degree in Mathematics MSc in Continuum
More informationIntroduction. Chapter Safety
Chapter 1 1.1 Safety Before cleaning optics, first read the relevant safety data sheet (SDS) formerly known as material safety data sheet (MSDS) to communicate the dangers of hazardous chemical products;
More informationLASER GALVO SCANNING MIRRORS OPTOSIC SIC OPTICS FOR HIGH-END LASER PROCESSES
LASER GALVO SCANNING MIRRORS OPTOSIC SIC OPTICS FOR HIGH-END LASER PROCESSES REFLECTING PERFORMANCE We manufacture high-performance laser galvo scanning mirrors from 10mm to 500mm apertures for single
More information3-6 Optical Thin Film Technology Used in the Terahertz Frequency
3-6 Optical Thin Film Technology Used in the Terahertz Frequency HOSAKO Iwao The multi-layer optical films realize various functions such as wide-band anti-reflection coating, high reflection coating,
More informationProduction(?) of chalcogenide glass optics : Xiang-Hua ZHANG, Laurent CALVEZ Hongli MA and Jacques LUCAS
Production(?) of chalcogenide glass optics : motivation, current status and future development Xiang-Hua ZHANG, Laurent CALVEZ Hongli MA and Jacques LUCAS Laboratory of glasses and ceramics, UMR CNRS Sciences
More informationLITE-ON TECHNOLOGY CORPORATION
Features * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter.
More informationSubstance WR4 Patinal
Product Information Substance WR4 Patinal GENERAL INFORMATION Substance WR4-SF Patinal was developed for the deposition of hydrophobic layers by evaporation in vacuum. Compared to other hydrophobic layers,
More informationA. Section Mirrors; mirrors for architectural application to receive window film.
1.1 SECTION INCLUDES A. Anti-graffiti window films for glazing systems and mirrors. 1.2 RELATED SECTIONS A. Section 08300 Mirrors; mirrors for architectural application to receive window film. B. Section
More informationBasics of Solar Photovoltaics. Photovoltaics (PV) Lecture-21
Lecture-21 Basics of Solar Photovoltaics Photovoltaics (PV) Photovoltaics (PV) comprise the technology to convert sunlight directly into electricity. The term photo means light and voltaic, electricity.
More informationMIRacle ATR Fast and Easy IR Sampling
MIRacle ATR Fast and Easy IR Sampling %Throughput PIKE MIRacle ATR ATR #2 ATR #3 MIRacle Highest IR Throughput ATR. The PIKE MIRacle is a universal ATR sampling accessory for analysis of solids, liquids,
More informationSpectroscopy Fiber Optic Probes for In-line Analytical Analysis
Spectroscopy Fiber Optic Probes for In-line Analytical Analysis FlexiSpec product line is a cluster of innovative Fiber Optic Probes and Fiber Probe Couplers designed for in-line analytical analysis in
More informationPRECISION OPTICAL FILTERS BY EOSS - ENHANCED OPTICAL SPUTTERING SYSTEM. Fraunhofer
PRECISION OPTICAL FILTERS BY EOSS - ENHANCED OPTICAL SPUTTERING SYSTEM EOSS ENHANCED OPTICAL SPUTTERING SYSTEM Fraunhofer IST, Braunschweig Contact: Dr. M. Vergöhl +49 531 2155 640 EOSS Coating System
More informationSpecimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process
Specimen Preparation Technique for a Microstructure Analysis Using the Focused Ion Beam Process by Kozue Yabusaki * and Hirokazu Sasaki * In recent years the FIB technique has been widely used for specimen
More informationProperties of Inclined Silicon Carbide Thin Films Deposited by Vacuum Thermal Evaporation
182 Properties of Inclined Silicon Carbide Thin Films Deposited by Vacuum Thermal Evaporation Oday A. Hamadi, Khaled Z. Yahia, and Oday N. S. Jassim Abstract In this work, thermal evaporation system was
More informationPhysics and Material Science of Semiconductor Nanostructures
Physics and Material Science of Semiconductor Nanostructures PHYS 570P Prof. Oana Malis Email: omalis@purdue.edu Today Bulk semiconductor growth Single crystal techniques Nanostructure fabrication Epitaxial
More informationInfrared Absorption by Ferroelectric Thin Film Structures Utilizing Novel Conducting Oxides
Approved for public release; distribution is unlimited. Infrared Absorption by Ferroelectric Thin Film Structures Utilizing Novel Conducting Oxides R. C. Hoffman, W. A. Beck, C. W. Tipton, D. N. Robertson,
More informationTECHNICAL PAPER. Author: Samuel Pellicori Materion Coating Materials News
TECHNICAL PAPER Achieving Mechanically Durable Coatings: General Discussion & Applications to Polymer Substrates Author: Samuel Pellicori Materion Coating Materials News Engineering thin-film coatings
More informationSupporting Information for
Electronic Supplementary Material (ESI) for Nanoscale. This journal is The Royal Society of Chemistry 2015 Supporting Information for Large-Scale Freestanding Nanometer-thick Graphite Pellicle for Mass
More informationMaterial as follows:
Part Number: AT3228ZG10ZS-RV Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features 1.Dimensions : 3.2mm X 2.8mm X 0.8mm. 2.Higher brightness. 3.Small package
More informationOPTICS AND COATINGS. MADE in GERMANY
OPTICS AND COATINGS MADE in GERMANY INTRODUCTION PRECISION OPTICS OPTICAL COATINGS SELECTION OF OPTICAL COMPONENTS FOR COMMON LASER TYPES CONTENTS INTRODUCTION ABOUT LAYERTEC 2 PRECISION OPTICS 3 SPUTTERING
More informationOPTICS and COATINGS for -80 C (ARENA workshop, Puerto Santiago march 2007)
Presentation by : Denis FAPPANI Commercial Engineer of SESO 1) SESO experience in OPTICS and COATINGS for -80 C A few typical examples of past realisations of : Mirrors (and reflective coatings) Lenses/objectives
More informationLow-cost, deterministic quasi-periodic photonic structures for light trapping in thin film silicon solar cells
Low-cost, deterministic quasi-periodic photonic structures for light trapping in thin film silicon solar cells The MIT Faculty has made this article openly available. Please share how this access benefits
More informationApplication note. Coated wafer mapping using an Agilent Cary 7000 Universal Measurement Spectrophotometer (UMS) with Solids Autosampler
Coated wafer mapping using an Agilent Cary 7000 Universal Measurement Spectrophotometer (UMS) with Solids Autosampler Application note Materials testing and research Authors Travis Burt, Farinaz Haq Agilent
More informationBeam Leads. Spider bonding, a precursor of TAB with all-metal tape
Beam Leads The vast majority of chips are intended for connection with thermosonic bonds: all other methods require some modification to the wafer. As early as 1972, Jordan described three gang-bonding
More informationNew Performance Levels for TPV Front Surface Filters
LM-4K54 June 1, 24 New Performance Levels for TPV Front Surface Filters TD Rahmlow, JE Lazo-Wasem, EJ Gratrix, PM Fourspring, and DM DePoy NOTICE This report was prepared as an account of work sponsored
More informationNTT-AT Optical Adhesives Lineup. Adhesives / Resins and Sealants for Optical Component Assembly
NTT-AT Optical Adhesives Lineup Adhesives / Resins and Sealants for Optical Component Assembly The adhesive technology used in optical communications is one of the key technologies we offer. Ask us anything
More information1/9. Through Hole Lamp. Through Hole Lamp LTL17KGH5D LTL17KGH5D. Rev Description By Date
Rev Description By Date Above data for PD and Customer tracking only - NPPR Receive and Upload on OPNC Lance 07/13/2016 1/9 Part No. : 1. Description Through hole LEDs are offered in a variety of packages
More informationState of the art in silicon immersed gratings for space - Aaldert van Amerongen, Hélène Krol, Catherine Grèzes-Besset, Tonny Coppens, Ianjit Bhatti,
State of the art in silicon immersed gratings for space - Aaldert van Amerongen, Hélène Krol, Catherine Grèzes-Besset, Tonny Coppens, Ianjit Bhatti, Dan Lobb, Bram Hardenbol, Ruud Hoogeveen Climate research
More informationPlasma Quest Limited
Plasma Quest Limited A Remote Plasma Sputter Process for High Rate Web Coating of Low Temperature Plastic Film with High Quality Thin Film Metals and Insulators Dr. Peter Hockley and Prof. Mike Thwaites,
More information1E5 Advanced design of glass structures. Martina Eliášová
1E5 Advanced design of glass structures Martina Eliášová List of lessons 1) History, chemical, production 2) Glass as a material for load bearing structures 3) Design of laminated plates 4) Design of glass
More informationCall for Expression of Interest (EoI)
Call for Expression of Interest (EoI) For the Supply of Grisms for Faint Object Spectrograph and Camera (FOSC) for ARIES 3.6m optical telescope at Devasthal, India 1. Background (i) Aryabhatta Research
More informationHigh Performance Optical Coatings Deposited Using Closed Field Magnetron Sputtering
High Performance Optical Coatings Deposited Using Closed Field Magnetron Sputtering D.R. Gibson, I.T. Brinkley, and J.L. Martin Applied Multilayers LLC, 1801 SE Commerce Avenue, Battle Ground, WA 98604
More informationEffects of Thin Film Depositions on the EUV mask Flatness
Effects of Thin Film Depositions on the EUV mask Flatness Kyoung-Yoon Bang, Jinback Back, Hwan-Seok Seo, Dongwan Kim, DongHoon Chung, SeongSue Kim, Sang-Gyun Woo, and HanKu Cho Photomask Team Semiconductor
More informationExtended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
More information