Success in plastics. Semi-finished engineering plastics. Delivery program

Transcription

1 Success in plastics Semifinished engineering plastics Delivery program

2

3 PLASTICS SPECIALIST WITH PRODUCTION IN DEPTH CENTROPLAST Engineering Plastics GmbH is a member of the CENTROTEC Sustainable AG, a successful group of companies which is active in the fields of engineering plastics, medical technology, climate and gas flue systems. More than years of experience in production of semifinished and machined components from high quality technical plastics are the base of our continuing success in business. Our partnershiplike relationship with our customers, both domestically and abroad, secure our firm position as a competent supplier to technicians, designers and purchasing managers. System certification according to DIN EN ISO 9001:00 ensures the consistency and reliability of our processes. foils. We are specialists in modifying materials in accordance with the desires of our customers and so are able to guarantee individual solutions. Our flexibility is demonstrated by our reasonable minimum production quantities or trials in cooperation with our customers. Our experienced application technicians can advise you on material selection, design, or appropriate working and handling of the desired materials. We have an extensive highperformance machine park. Due to a large number of various CNC driven lathes and milling centres it is possible for us to produce small to medium scaled quantities as well as technically demanding prototypes reliable and cost effectively. affiliated companies within the CENTROTEC Group. Substantial stocks ensure the regular availability of our standard products, the details of which are shown on the following pages. Please contact us if you have an inquiry concerning different dimensions, colours or materials. For the manufacture of semifinished thermoplastic products we have extrusion lines for continuous extrusion, calendaring and vacuum calibration. These enable us to produce rods, thin and thick walled tubes as well as sheets and We can also offer solutions in production processes for injection moulded or large scale vacuum forming through our regular dialogue with our sister company ROLF SCHMIDT INDUSTRIPLAST A/S in Denmark and various 1

4 OVERVIEW OF PRODUCTS CENTRODAL 5 CENTRODAL C POM C ROD PLATE SHEET TUBE SQUARE BAR CENTRODAL G POM + PE ROD PLATE SHEET TUBE CENTRODAL TF POM + PTFE ROD PLATE TUBE CENTRODAL W POM W ROD PLATE SHEET TUBE CENTRODAL GF POM GF ROD PLATE TUBE CENTRODAL LF POM LF ROD PLATE CENTRODAL CENTROLYTE CENTROLYTE PET ROD PLATE SHEET CENTROLYTE ZX PET ZX ROD PLATE SHEET CENTROLYTE CENTROMID 21 CENTROMID 6 E PA 6 E ROD PLATE SHEET TUBE CENTROMID 6 G PA 6 G ROD PLATE CENTROMID 6 GF PA 6 GF ROD PLATE TUBE CENTROMID 6.6 PA 6.6 ROD PLATE SHEET TUBE CENTROMID 6.6 GF PA 6.6 GF ROD CENTROMID 6.6 CF PA 6.6 CF ROD CENTROMID 12 PA 12 ROD PLATE SHEET TUBE CENTROMID 12 GF PA 12 GF ROD PLATE TUBE CENTROMID 12 soft PA 12 soft TUBE CENTROMID 12 LE soft PA 12 LE soft TUBE CENTROMID CENTROFLON 23 CENTROFLON PVDF ROD PLATE TUBE CENTROFLON CENTROPHEN CENTROPHEN PPE ROD PLATE SHEET TUBE CENTROPHEN GF PPE GF ROD PLATE CENTROPHEN 2

5 CENTROTRON CENTROTRON PPS ROD PLATE CENTROTRON SKX PPS SKX ROD PLATE TUBE CENTROTRON GF PPS GF ROD PLATE TUBE CENTROTRON GF PPS GF ROD CENTROTRON HIGH PERFORMANCE MATERIALS other HIGH PERFORMANCE MATERIALS CENTROPEEK PEEK ROD CENTRO HPM PPSU ROD CENTRO HPM PEI ROD CENTRO HPM PSU ROD other HIGH PERFORMANCE MATERIALS CENTROLEN CENTROLEN PEHD PEHD ROD TUBE CENTROLEN PEUHMW PEUHMW ROD CENTROLEN PPH PPH ROD TUBE CENTROLEN PPs PPs ROD TUBE CENTROLEN PP LF PP LF ROD TUBE CENTROLEN TV PP TV ROD CENTROLEN PP GF PP GF ROD CENTROLEN CENTROLAB CENTROLAB CENTROLAB HT PPHT ROD PLATE TUBE CENTROCARB CENTROCARB PC ROD PLATE CENTROCARB GF PC GF ROD PLATE CENTROSOL 49 CENTROSOL ABS ROD CENTROSOL LF ABS LF ROD CENTROCARB CENTROSOL MATERIAL PROPERTIES

6

7 CENTRODAL CENTRODAL CENTRODAL POM strength with high dimensional stability CENTRODAL has good machinability and is highly resistant to solvents. CENTRODAL has high creep strength and low creep tendencies. CENTRODAL absorbs very little water and has good abrasion and wear resistance. bearing bushes structural components subjected to dynamic loads sliding plates CENTRODAL GF: % glass fibre reinforced POM very high strength high heat strength dimensional stability high strength and hardness very good machinability dimensionaly stable low water absorption very low creep behaviour CENTRODAL TF: with PTFE modified POM improved sliding properties racks and annular gears dimensionally accurate structural components for pumps housings and transmission components subjected to high loads CENTRODAL C: versatile high performance material good chemical resistance very good machinability good surface slip properties seals scrapers and chain guides toothed wheels and rollers CENTRODAL LF: electrically conductive ( 3 Ohm) high mechanical strength high dimensional stability sliding components and rollers toothed wheels, ratchets, and cams guides, sliding plates pump components CENTRODAL G: with UHMWPE modified POM, blue coloured sliding friction coefficient 0.19 compared to steel improved dry running and 5 emergency running properties CENTRODAL W: versatile high performance material very good machinability high mechanical strength tested and certified for the use with drinking water equipment in the field of drinking water seals for pipes for domestic installation, supply lines and main lines valve bodies pump components structural components in potentially explosive areas components for diverting static charges applications in research and development conveyor paddles for powdered materials

8 CENTRODAL Rods POM CENTRODAL C CENTRODAL C CENTRODAL G CENTRODAL TF CENTRODAL GF CENTRODAL LF black blue black black reference (DIN) POM C POM C black POM + PE blue POM + PTFE POM GF black POM LF black density (g/cm 3 ) 1,41 1,41 1,35 1,52 1, 1,45 diameter tolerance diameter weight (mm) (mm) (kg/m) +0,1 +0,4 +0,1 +0,4 +0,1 +0,5 +0,1 +0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,4 +2,0 +0,5 +2,2 +0,5 +2,2 +0,6 +2,5 +0,6 +2,5 +0,7 +3,0 +0,7 +3,0 +0,8 +3,5 +0,8 +3,5 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,1 +4,5 +1,1 +4,5 +1,2 +5,0 +1,2 +5,0 +1,2 +5,0 +1,2 +5,0 +1,3 +5,5 +1,3 +5,5 +1,3 +5,8 +1,3 +5,8 +1,5 +6,2 +1,5 +6,2 +1,5 +6,2 +1,5 +6,2 +1,6 +6,5 0,031 0,044 0,077 0,119 0,174 0,268 0,4 0,383 0,4 0,572 0,734 0,916 1,049 1,198 1,5 1,857 2,358 2,901 3,626 4,176 4,889 5,658 6,492 7,411 8,381 9,3,435 11,591 12,833 14,062,426 16,771 18,172 19,689 21,5 22,777 26,175 27,989 29,791 31,762 33,6 35,654 37,684 42,042 46,3 51,9 56,173 58,868 61,468 64,1 72,432 75,4 Additional dimensions available on request. 0,031 0,044 0,077 0,119 0,174 0,268 0,4 0,383 0,4 0,572 0,734 0,916 1,049 1,198 1,5 1,857 2,358 2,901 3,626 4,176 4,889 5,658 6,492 7,411 8,381 9,3,435 11,591 12,833 14,062,426 16,771 18,172 19,689 21,5 22,777 26,175 27,989 29,791 31,762 33,6 35,654 37,684 42,042 46,3 51,9 56,173 61,468 64,1 72,432 stock lengths: mm, 00 mm tolerance length: 0% to + 3% 0,291 0,366 0,4 0,547 0,3 1,004 1,446 1,778 2,7 2,777 3,472 3,998 4,681 5,417 6,249 7,096 8,024 8,981,032 11,098 13,464 16,057 17,399 18,851 21,7,061,411 36,0 nonstandard item (not available from stock, underlies minimum order quantity) 0,328 0,7 0,791 1,131 2,002 3,127 4,1 6, 7,989,112 12,496,9 19,590 24,554 28,217 34,2,623 0,345 0,533 0,833 1,190 2,8 3,292 4,738 6,421 8,4,644 13,3,957 19,031,621 0,313 0,483 0,755 1,079 1,929 2,983 4,294 5,819 7,621 9,646 11,9

9 CENTRODAL Plates / Sheets / Films POM CENTRODAL C CENTRODAL C CENTRODAL G CENTRODAL TF CENTRODAL GF CENTRODAL LF black blue black black reference (DIN) POM C POM C black POM + PE blue POM + PTFE POM GF black POM LF black density (g/cm 3 ) 1,41 1,41 1,35 1,52 1, 1,45 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) 0,5** 0,8** 1 1,5 2 2, ,02 +0,08 0,05 +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, +0,5 +3,5 +0,5 +3,5 +0,5 +3,5 +0,5 +3,5 +0,5 +3,5 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 0,774 1,4 1,4 2,190 2,9 3,649 4,379 5,839 7,299 8,759 6,271 12,481 7,738 * 9,4,1 9,462 * 11,543 11,662 * 14,228 23,2,123,329 * 18,2,9 18,997 * 23,176 37,8 23,4 * 28,187 45,983 26,771 32,661,439 * 37,135,581 34,6 41,9 37,773 * 46,084 75,178 41,7 51,005 45,475 55,479 90,6 49,692 53,3 65,099 6,198 74,047 1,796 82,995 91, ,992 1,4 2,9 4,379 5,839 7,299 8,759 6,271 12,481 7,738 * 9,4,1 9,462 * 11,543 11,662 * 14,228 23,2,329 * 18,2,9 18,997 * 23,176 37,8 23,4 * 28,187 45,983 26,771 32,661,439 * 37,135,581 34,6 41,9 37,773 * 46,084 75,178 41,7 51,005 45,475 55,479 90,6 49,692 53,3 65,099 6,198 74,047 1,796 82,995 91, ,992 7,9 9,039 9,059 11,052 11,166 13,622 14,677 17,906 18,188 22,190 22,121 26,988,632 31,271 29,144 35,555 39,862 36,166 44,123 43,5 53,118 51,089 62,328 Additional dimensions available on request. ** continuous rolls (cardboard ID 76 mm),177 12,444,338,161 24,984,386,032 49,679 8,781,737 13,234 17,395 21,557 26,217 34,5 42,863 stock lengths: width mm length /00 mm; width mm length /00 mm; width mm length /00 mm tolerance length: 0% to + 3% tolerance width: +1% to + 4% * discontinued standard dimension, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 7,958 9,7 11,993,764 19,563 23,7 31,2 38,845

10 CENTRODAL Tubes POM Continue right page ,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,4 +1,1 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,6 +2,0 +0,8 +2,5 +0,8 +2,5 +0,8 +2,5 +0,8 +2,5 +0,8 +2,5 +0,8 +3,0 +0,8 +3,0 +0,8 +3,0 +0,8 +3,0 +0,8 +3,0 +0,8 +3,0 +0,8 +3,0 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,4 1,1 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,6 2,0 0,8 2,5 0,8 2,5 0,8 2,5 0,8 2,5 0,8 2,5 0,8 3,0 0,8 3,0 0,8 3,0 0,8 3,0 0,8 3,0 0,8 3,0 0,8 3,0 CENTRODAL C CENTRODAL C CENTRODAL G black blue reference (DIN) POM C POM C black POM + PE blue density (g/cm 3 ) 1,41 1,41 1,35 outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) ,388 0,342 0,6 0,486 0,3 0,3 0,517 0,411 0,787 0,1 0,513 0,835 0,646 1,035 0,853 0,6 1,435 1,353 1,287 1,171 0,932 1,524 1,286 0,991 2,016 1,778 1,484 2,565 2,327 2,032 1,275 3,123 2,486 3,369 2,619 1,644 3,399 2,4 4,923 4,179 3,2 4,046 2,853 0,388 0,342 0,6 0,486 0,3 0,3 0,517 0,411 0,787 0,1 0,513 0,835 0,646 1,035 0,853 0,6 1,435 1,353 1,287 1,171 0,932 1,524 1,286 0,991 2,016 1,778 1,484 2,565 2,327 2,032 1,275 3,123 2,486 3,369 2,619 1,644 3,399 2,4 4,923 4,179 3,2 4,046 2,853 4,001 3,874 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 8

11 CENTRODAL Tubes POM Continuation ,8 +3,0 +0,8 +3,0 +0,8 +3,0 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,2 +3,6 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,5 +4,5 +1,8 +5,4 +1,8 +5,4 +1,8 +5,4 +1,8 +5,4 +1,8 +5,4 +2,0 +6,0 +2,0 +6,0 +2,0 +6,0 +2,0 +6,0 +2,0 +6,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +11,0 +3,0 +11,0 +3,0 +11,0 +3,0 +11,0 +3,0 +11,0 +3,0 +11,0 0,8 3,0 0,8 3,0 0,8 3,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 1,6 5,0 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,0 6,5 2,2 7,5 2,2 7,5 2,2 7,5 2,2 7,5 2,2 7,5 2,5 8,5 2,5 8,5 2,5 8,5 2,5 8,5 2,5 8,5 3,0 12,0 3,0 12,0 3,0 12,0 3,0 12,0 3,0 12,0 3,5 14,0 3,5 14,0 3,5 14,0 3,5 14,0 3,5 14,0 3,5 14,0 CENTRODAL C CENTRODAL C CENTRODAL G black blue reference (DIN) POM C POM C black POM + PE blue density (g/cm 3 ) 1,41 1,41 1,35 outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 5,908 4,939 3,745 8,083 7,145 5,983 4,596,272 9,335 8,173 5,174 11,749 7,588,792 7,386 16,063 11,966 8,111 18,126 14,7 12,6 19,863 16,007 23,736 19,908 29,7 22,986 17,359 42,1 36,7 32,041 23,7 19,947,362 37,4 28,443,839 32,012,9 51,472 97,765 79,078 2,143 47,909 5,908 4,939 3,745 8,083 7,145 5,983 4,596,272 9,335 8,173 5,174 11,749 7,588,792 7,386 16,063 11,966 8,111 18,126 14,7 12,6 19,863 16,007 23,736 19,908 29,7 22,986 17,359 42,1 36,7 32,041 23,7 19,947,362 37,4 28,443,839 32,012,9 51,472 97,765 79,078 2,143 47,909 5,656 4,729 6,841 5,728 8,938 7,8 11,013,332 11,457 17,355 12,1 19,017 19,061 22,008,678 9

12 CENTRODAL Square bar POM CENTRODAL C CENTRODAL C black reference (DIN) POM C POM C black density (g/cm 3 ) 1,41 1,41 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) 0 0 0,00 +12,00 137, ,000 stock length: mm tolerance length: 0% to + 3% tolerance width: +0 mm to +12 mm nonstandard item (not available from stock, underlies minimum order quantity) Rods POM CENTRODAL W reference (DIN) POM W density (g/cm 3 ) 1,41 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,5 +2,2 +0,6 +2,5 +0,7 +3,0 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,1 +4,5 0,119 0,4 0,4 0,734 1,049 1,5 1,857 2,901 4,176 5,658 7,411 9,3 11,591 14,062 16,771 19,689 22,777 26,175 29,791 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity)

13 CENTROLYTE CENTROLYTE PET electrically insulating, good chemical resistance, and excellent machinability CENTROLYTE: high mechanical strength outstanding dimensional stability CENTROLYTE ZX: with solid lubricant additive improved sliding properties selflubricating CENTROLYTE nontoxic higher load capability in dry CENTROLYTE has only limited very good wear resistance running heat expansion and has very good good weather resistance electrical insulating properties. CENTROLYTE is a material for sliding bearings with high mechanical strength, very good creep strength, low friction coefficient, and good dimensíonal stability. precision plain bearings high strength, hardness, pump components plug connectors and toughness coil bodies rollers low heat expansion, ball bearing cups toothed gears dimensionally stable protective housings good acid resistance covers good wearing properties very good electrical insulating properties can be bonded and welded good machinability good UVresistance of the black types 11

14 CENTROLYTE reference (DIN) PET PET ZX light grey density (g/cm 3 ) 1,39 1,45 diameter tolerance diameter weight (mm) (mm) (kg/m) Rods PET +0,1 +0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,4 +2,0 +0,5 +2,2 +0,6 +2,5 +0,7 +3,0 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,1 +4,5 +1,2 +5,0 +1,2 +5,0 +1,3 +5,5 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% CENTROLYTE 0,122 0,179 0,273 0,3 0,0 0,463 0,738 1,055 1,436 1,518 1,868 2,371 2,917 3,519 4,199 4,916 5,690 6,563 7,452 9,4 11,6 14,1 16,9 19,7 22,9 26,2 29,8 33,7 37,9 46,8 nonstandard item (not available from stock, underlies minimum order quantity CENTROLYTE ZX light grey 0,482 0,753 1,074 1,908 2,972 4,277 5,3 7,0 11,897 17,219 26,857 12

15 CENTRODAL Plates / Sheets PET CENTROLYTE reference (DIN) PET PET ZX light grey density (g/cm 3 ) 1,39 1,45 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) , +0, 0, +0, 0, +0, 0, +0, 0, +0, +0,5 +3,5 +0,5 +3,5 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 +0,5 +5,0 Additional dimensions available on request. 2,878 4,317 5,756 7,195 8,634 7,618 12,612 9,0,562 11,493 19,028 14,166 23,453 18,621,828 23,076 38,4 28,065 46,464 36,975 61,214 45,884 75,965 55,239 91,453 64,817 7,9 73, ,0 83,636 91,546 1,561 CENTROLYTE ZX light grey stock lengths: width mm stock length /00 mm; width mm stock length /00 mm tolerance length: 0% to + 3% tolerance width: +1% to + 4% nonstandard item (not available from stock, underlies minimum order quantity) 19,176 28,8 37,951 47,088 56,676 CENTROLYTE 13

16

17 CENTROMID CENTROMID PA technical standard plastics CENTROMID 6 E: extruded PA CENTROMID 6.6 GF: extruded % glass fibre tough and impact resistant reinforced PA CENTROMID materials are macro good chemical resistance very high strength and rigidity molecular, semicrystalline thermo can be bonded and welded lower moisture absorption plastics with high impact resistance. The differences between the various types are achieved through the composition and structure of the molecular chains and using special additives. CENTROMID has relatively high moisture absorption. Tensile and compressive strengths vary by type. CENTROMID 6 GF: extruded % glass fibre reinforced PA sealing rings flanges sleeves very high strength and rigidity improved ultimate elongation behaviour housing parts threaded bolts distance pieces CENTROMID 12: extruded, unreinforced PA CENTROMID good machinability increased dimensional increased impact resistance can be bonded and welded accuracy when hot lower moisture absorption chemical resistance to fats, increased operating improved chemical resistance oils, gasoline unreinforced types electrically insulating good sliding characteristics with high wear resistance temperature possible ( C ) rollers belt pulleys racks precision elements drive parts cases and housing CENTROMID 6.6: extruded, unreinforced PA CENTROMID 12 GF: extruded % glass fibre increased hardness and wear reinforced PA CENTROMID 6 G: cast PA resistance increased abrasion strength good impact strength even at dimensionaly stable and hard wearing very good electrical insulating improved tensile and compres low temperatures properties sive strength compared to PA 6E improved dimensional accuracy and lower moisture absorption can be bonded and welded bearing cages sliding bearings articulated joint blocks good mechanical strength, rigidity, and hardness lever valve parts sliding bearings with low loads hammerheads toothed gears CENTROMID 6.6 CF: extruded % carbon fibre reinforced PA CENTROMID 12 soft: extruded, unreinforced PA suitable for conveying increased operating foodstuffs temperature ( 1 C ) furthermore availabe with addi very high strength tional antistatic performance (PA 12 LE soft antistatic) precision components drive parts case and housing flexible tubes for worm gears and spiral conveyors

18 CENTROMID Rods PA Continue right page CENTROMID 6 E CENTROMID 6 E CENTROMID 6 GF CENTROMID 6.6 CENTROMID 6.6 black black black reference (DIN) PA 6 E PA 6 E black PA 6 + GF black PA 6.6 PA 6.6 black density (g/cm 3 ) 1,14 1,14 1,34 1,14 1,14 diameter tolerance diameter weight (mm) (mm) (kg/m) +0,1 +0,4 +0,1 +0,4 +0,1 + 0,5 +0,1 + 0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,4 +2,0 +0,5 +2,2 +0,6 +2,5 +0,7 +3,0 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,2 +5,0 +1,2 +5,0 +1,2 +5,5 Additional dimensions available on request. 0,0 0,035 0,063 0,096 0,141 0,217 0,3 0,462 0,593 0,745 0,848 0,969 1,221 1,2 1,906 2,345 2,932 3,376 3,953 4,575 5,249 5,992 7,584 9,372 11,369 13,5,919 18,4 21,163,6,468 37,598 stock lengths: mm, 00 mm tolerance length: 0% to + 3% 0,096 0,217 0,3 0,593 0,848 0,969 1,221 1,2 1,906 2,345 2,932 3,376 4,575 5,992 7,584 9,372 13,5 21,163 * discontinued standard dimension, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 0,447 0,697 0,997 1,765 2,757 3,968 5,377 7,043 8,914 11,016,939 24,875 0,096 0,217 0,3 0,593 0,848 1,221 1,2 1,906 2,345 2,932 3,376 3,953 4,575 5,249 5,992 7,584 9,372 11,369 13,5,919 18,4 21,163,6,468 37,598 0,3 0,593 0,848 1,221 1,2 1,906 2,345 2,932 3,376 3,953 4,575 * 5,249 5,992 7,584 9,372 16

19 Rods PA Continuation CENTROMID 6.6 GF CENTROMID 6.6 CF CENTROMID 12 CENTROMID 12 CENTROMID 12 GF black black black reference (DIN) PA 6.6 GF black PA 6.6 CF black PA 12 PA 12 black PA 12 GF density (g/cm 3 ) 1,34 1,23 1,04 1,04 1,23 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,4 +0,1 +0,4 +0,1 + 0,5 +0,1 + 0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,4 +2,0 +0,5 +2,2 +0,6 +2,5 +0,7 +3,0 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,2 +5,0 +1,2 +5,0 +1,2 +5,5 0,111 0,2 0,436 0,6 0,9 1,0 1,7 2,6 3,8 5,2 6,8,0, 18,0 24,0 0,4 0,4 0,9 1,6 2,5 3,643 0,088 0,198 0,347 0,541 0,774 1,114 1,3 1,739 2,1 2,675 3,0 3,6 4,173 4,814 5,466 6,918 8,5,372 12,3 14,522 16,0 19,6 0,088 0,198 0,347 0,541 0,774 1,114 1,3 1,739 2,1 2,675 3,0 3,6 4,173 4,814 5,466 6,918 8,5,372 12,3 14,522 16,0 19,6 0,4 0,6 0,9 1,317 1,6 2,5 3,643 4,936 6,465 8,182,112 12,267 14,6 19,869 22,833 CENTROMID Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 17

20 CENTROMID Rods PA Cast reference (DIN) PA 6 Cast PA 6 Cast black density (g/cm 3 ) 1, 1, diameter tolerance diameter weight (mm) (mm) (kg/m) ,0 +3,0 +1,0 +3,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,0 +4,0 +1,5 +5,0 +1,5 +5,0 +1,5 +5,0 +1,5 +5,0 +1,5 +5,0 +1,5 +5,0 +2,0 +7,0 +2,0 +7,0 +2,0 +7,0 +2,0 +7,0 +2,0 +7,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +3,0 +9,0 +4,0 +11,0 +4,0 +11,0 +4,0 +11,0 +4,0 +11,0 +5,0 +13,0 +5,0 +13,0 Additional dimensions available on request. CENTROMID 6 G 2,390 2,990 3,4 4,0 4,6 5,390 6,1 6,9 7,7 8,6 9,5 11,0 13,0 14,9 16,0 18,7 21,5 24,900 28,0 31,3 34,8 38, 42,9 47,0 51,0 55,0,3 65,1,1 75,0 86,0 1,0 117,0 137,0 2, , , stock lengths: Ø 1 mm: /00 mm Ø 1 mm: mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) CENTROMID 6 G black 2,390 2,990 3,4 4,0 4,6 5,390 6,1 7,7 9,5 11,0 13,0 14,9 16,0 18,7 21,5 24,900 28,0 31,3 34,8 38, 42,9 47,0 51,0,3,1 75,0 86,0 1,0 117,0 137,0 2,900 18

21 Plates / Sheets / Films PA Continue next page CENTROMID 6 E CENTROMID 6 E CENTROMID 6 GF CENTROMID 6.6 black black reference (DIN) PA 6 E PA 6 E black PA 6 GF black PA 6.6 density (g/cm 3 ) 1,14 1,14 1,34 1,14 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) 0,3** 0,5** 0,8** 1 1,5 2 2, ,02 +0,08 0,02 +0,08 0,05 +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, +0, +0,90 +0,5 +3,5 0,354 0,590 0,944 1,1 1,7 2,3 2,951 3,541 4,721 5,901 7,081,091 7,633 11,3,121 18,738 22,790,024 37,9 1,1 2,3 3,541 4,721 5,901 7,081,091 7,633 11,3,121 18,738 22,790,024 37,9 7,354 11,083 14,568 18,054 21,957 28,928 35,898 1,7 2,3 2,951 3,541 4,721 5,901 7,081,091 7,633 11,3 *,121 18,738 22,790,024 37,9 CENTROMID Additional dimensions available on request. ** continuous rolls (cardboard ID 76 mm) stock lengths: width mm length /00 mm; width mm length /00 mm; width mm length /00 mm tolerance length: 0% to + 3% tolerance width: +1% to + 4% * discontinued standard dimension, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 19

22 CENTROMID Plates / Sheets / Films PA Continuation 0,3** 0,5** 0,8** 1 1,5 2 2, CENTROMID 6.6 CENTROMID 12 CENTROMID 12 CENTROMID 12 GF black black reference (DIN) PA 6.6 black PA 12 PA 12 black PA 12 GF density (g/cm 3 ) 1,14 1,04 1,04 1,23 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) 0,02 +0,08 0,02 +0,08 0,05 +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, 0, +0, +0,5 +3,5 Additional dimensions available on request. 7,633 11,3,121 18,738 22,790,024 37,9 2,3 3,2 4,7 5,384 6,4 5,7 8,2 11,7 14,012 17,041 22,451 27,861 33,542 ** continuous rolls (cardboard ID 76 mm) 5,7 8,2 11,7 14,012 17,041 22,451 27,861 33,542 stock lengths: width mm length /00 mm; width mm length /00 mm; width mm length /00 mm tolerance length: 0% to + 3% tolerance width: +1% to + 4% nonstandard item (not available from stock, underlies minimum order quantity) 6,7,173 13,372 16,572,5 26,553 32,951

23 Plates / Sheets PA Cast reference (DIN) PA 6 Cast PA 6 Cast black density (g/cm 3 ) 1, 1, thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) ,5 +3,0 +0,5 +3,0 +0,5 +3,0 +0,5 +3,0 +0,5 +3,0 +0,5 +3,0 +0,5 +3,5 +0,5 +3,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 +0,5 +4,5 CENTROMID 6 G 13, 16,575,8 19,4,6,0,3,975 31,175 38,175 37, 45,9 49,3,3 61,0 74,7 73,5 90,0 85,3 4,4 97, 118,8 8,8 133,2 1,0 147,6 CENTROMID 6 G black 13, 16,575,8 19,4,6,0,3,975 31,175 38,175 37, 45,9 49,3,3 61,0 74,7 73,5 90,0 85,3 4,4 97, 118,8 8,8 133,2 1,0 147,6 CENTROMID Additional dimensions available on request. stock lengths: 00 mm tolerance length: 0% to + 3% tolerance width: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) Tubes PA reference (DIN) density (g/cm 3 ) CENTROMID outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) (mm) (mm) Tubes in all PA qualities and dimensions are available on request. 21

24

25 CENTROFLON CENTROFLON PVDF very good chemical and temperature resistance and good slip characteristics CENTROFLON unifies good mechanical, thermal, and electrical characteristics with excellent chemical resistance. The very low water absorption of CENTROFLON allows unlimited use in liquids. The operative temperature range of C to 1 C offers a large range of operation for this material. high stress cracking resistance large operative temperature range very high chemical resistance excellent insulating properties CENTROFLON: excellent chemical resistance dimensionally stable at C to 1 C without load good machinability extremely low water absorption good welding characteristics UV resistance excellent flammability rating (V 0) pump wheels pump covers flanges CENTROFLON valve bodies laboratory equipment medical technology 23

26 CENTROFLON Rods PVDF reference (DIN) PVDF density (g/cm 3 ) 1,78 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,5 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +0,7 +0,2 +1,1 +0,2 +1,1 +0,2 +1,1 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,3 +0,3 +1,6 +0,3 +1,6 +0,3 +1,6 +0,4 +2,0 +0,4 +2,0 +0,5 +2,2 +0,5 +2,2 +0,6 +2,5 +0,6 +2,5 +0,7 +3,0 +0,8 +3,5 +0,8 +3,5 +0,8 +3,5 +0,9 +3,8 +0,9 +3,8 +0,9 +3,8 +1,0 +4,2 +1,0 +4,2 +1,1 +4,5 +1,2 +5,0 +1,2 +5,0 +1,2 +5,0 +1,3 +5,5 +1,5 +6,2 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% CENTROFLON 0,1 0,2 0,339 0,384 * 0,593 0,722 0,926 1,7 1,324 1,513 1,906 2,345 2,977 3,662 3,956 4,418 4,578 5,271 6,172 7,143 8,239 9,356,5 11,841 13,228 14,633 17,752 19,474 21,172 22,941 24,856 26,769 28,754,914 33,043 * 37,8,097 45,009 47,572 58,5 91,439 * discontinued standard dimensions, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 24

27 Plates / Sheets PVDF CENTROFLON reference (DIN) PVDF density (g/cm 3 ) 1,78 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) ,5 +3,5 Additional dimensions available on request. stock lengths: / 00 mm tolerance length: 0% to + 3% tolerance width: +1% to + 4% 9,769 11,945 14,722 19,352 23,982 29,167 33,797 38,426 43,056 47,686 * 57,8 * * discontinued standard dimensions, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) CENTROFLON Tubes PVDF reference (DIN) density (g/cm 3 ) CENTROFLON outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) (mm) (mm) Tubes made of PVDF are available on request.

28

29 CENTROPHEN CENTROPHEN PPE impact resistant at low temperatures to C and dimensionally stable up to 1 C CENTROPHEN: high dimensional stability high impact resistance heat resistant up to 1 C very low water absorption CENTROPHEN GF: % glass fibre reinforced PPE extremely high impact resistance increased temperature range CENTROPHEN is lightweight plastic with low moisture absorption, good dimensional stability and accuracy, and hydrolysis resistance. CENTROPHEN has low tendency to creep even at high temperatures and is difficult to burn. can be used over a large range of temperatures easy to work good chemical resistance low tendency to creep high resistance to hydrolysis fittings drive components for domestic appliances components for electrotechnical equipment electronic housings valve pistons support roller CENTROPHEN 27

30 CENTROPHEN Rods PPE reference (DIN) PPE grey PPE GF density (g/cm 3 ) 1,06 1, diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,5 +0,2 +1,2 +0,2 +1,2 +0,2 +1,6 +0,3 +2,0 +0,3 +2,0 +0,3 +2,5 +0,3 +2,5 +0,4 +3,0 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 +0,8 +4,6 +0,9 +5,4 +0,9 +5,4 +1,0 +5,8 Additional dimensions available on request. CENTROPHEN grey 0,090 0,133 0,231 0,357 0,558 0,796 1,414 1,0 2,211 3,186 4,8 4,971 5,6 7,144 8,826 13,7 14,981 17,316 19,884 stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) CENTROPHEN GF 0,1 0,438 0,684 0,977 1,734 2,711 3,907 5,283 6,917 8,762,824 16,900 28

31 Plates / Sheets PPE reference (DIN) PPE grey PPE GF density (g/cm 3 ) 1,06 1, thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) ,5 +3,5 +0,5 +3,5 Additional dimensions available on request. CENTROPHEN grey stock lengths: / 00 mm tolerance lengths: 0% to + 3% tolerance width: +1% to + 4% 5,817 7,113 8,767 * 9,319 11,524 14,281 17,369 *,126 22,883,6 28,397 31,4 34,187 * discontinued standard dimensions, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) CENTROPHEN GF 7,134 8,724,752 14,133 17,5 21,2 28,064 34,827 41,927 CENTROPHEN Tubes PPE reference (DIN) density (g/cm 3 ) CENTROPHEN outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) (mm) (mm) Tubes made of PPE are available on request. 29

32

33 CENTROTRON CENTROTRON PPS suitable for high temperatures CENTROTRON is a plastic that is resistant to oxidation and hydrolysis which can be used in applications with an operating temperature of up to 2 C. CENTROTRON has a low sliding friction coefficient and high abrasion resistance CENTROTRON: very good friction and wear behaviour excellent electrical insulating properties hydrolysis resistant low warping tendencies close tolerances possible high hardness CENTROTRON GF : excellent combination of impact resistance and improved rigidity % glass fibre reinforced permanent use at up to 1 C and temporary use at up to 2 C high strength, hardness, and rigidity very good chemical resistance low water absorption outstanding dimensional accuracy resistant to oil and petrol plug connectors sensor housings parts for electrical ovens CENTROTRON SKX: modified for impact resistance good machinability permanent use at up to 1 C and temporary use at up to 2 C CENTROTRON GF : % glass fibre reinforced significantly improved rigidity permanent use at up to 2 C and temporary use at up to 2 C CENTROTRON gas and oil pipings flanges automotive components bearings sealing rings 31

34 CENTROTRON Rods PPS reference (DIN) PPS PPS SKX PPS GF anthracite PPS GF PPS GF black density (g/cm 3 ) 1,35 1, 1,41 1,65 1,65 diameter tolerance diameter Weight weight (mm) (mm) (kg/m) (kg/m) 36 +0,2 +1,2 +0,2 +1,2 +0,2 +1,6 +0,2 +1,6 +0,3 +2,0 +0,3 +2,5 +0,3 +2,5 0,455 0,714 1,021 1,479 1,818 2,838 4,098 5,549 Additional dimensions available on request. stock lengths: mm; tolerance length: 0% to + 3% CENTROTRON CENTROTRON SKX CENTROTRON GF CENTROTRON GF CENTROTRON GF anthracite black 0,438 0,684 0,977 1,411 1,734 2,711 3,907 5,283 nonstandard item (not available from stock, underlies minimum order quantity) 0,482 0,756 1,082 1,566 1,926 3,007 4,341 5,878 0,555 0,869 1,2 1,791 2,0 3,441 4,959 6,6 0,555 0,869 1,2 1,791 2,0 3,441 4,959 6,6 Plates / Sheets PPS CENTROTRON SKX CENTROTRON GF anthracite reference (DIN) PPS SKX PPS GF anthracite density (g/cm 3 ) 1, 1,41 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) Additional dimensions available on request. +0,5 +3,5 8,4 13,118 17,243 21,368,988 34,238 42,488 51,1 9,4 14,228 18,2 23,176 28,187 37,135 46,084 55,479 stock lengths: mm; tolerance length: 0% to + 3% tolerance width: +1 % to +4 % nonstandard item (not available from stock, underlies minimum order quantity) Tubes PPS reference (DIN) density (g/cm 3 ) CENTROTRON outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) (mm) (mm) Tubes made of PPS SKX and PPS GF are available on request. 32

35 CENTROPEEK CENTROPEEK perfect for the highest demands for temperature resistance and strength CENTROPEEK is a high performance material with the unusual combination of high temperature resistance, excellent chemical resistance, and superb mechanical characteristics. The top operating temperature in air is about 2 c and brief peaks of up to 3 C are possible CENTROPEEK: good sliding friction properties suitable for use with foodstuffs suitable for use with medical equipment very high strength values can be hot steam sterilized high mechanical strength very high dimensional stability good electrical insulating properties resistance to high energy radiation excellent chemical resistance hydrolysis resistant motor elements sliding bearings insulations object holders CENTROPEEK 33

36 CENTROPEEK Rods PEEK reference (DIN) PEEK PEEK black density (g/cm 3 ) 1,31 1,31 diameter tolerance diameter weight (mm) (mm) (kg/m) +0,1 +0,5 +0,2 +1,2 +0,2 +1,2 +0,2 +1,6 +0,2 +1,6 +0,3 +2,0 +0,3 +2,0 +0,3 +2,5 +0,3 +2,5 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 +0,9 +5,4 +1,0 +5,8 CENTROPEEK 0,1 0,164 0,285 0,439 0,685 0,9 1,3 1,7 2,2 2,7 3,9 5,0 6,9 8,0,8 18,0 24,1 CENTROPEEK black 0,1 0,164 0,285 0,439 0,685 0,9 1,3 1,7 2,7 Additional dimensions available on request. stock lengths: mm, 00 mm; tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 34

37 other HIGH PERFORMANCE MATERIALS other HIGH PERFORMANCE MATERIALS for various uses at high temperatures Unreinforced amorphous high performance thermoplastics with very good mechanical, electrical and thermal properties for use at higher operating temperatures ( in air ) with low mechanical loads. variety in usage high mechanical strength nontoxic very high dimensional stability suitable for repeated steam sterilization PPSU: up to 2 C high impact resistance high chemical resistance outstanding hydrolysis resistance improved impact resistance compared to PEI and PSU medical equipment construction pharmaceutical equipment construction PSU: up to 1 C very good hydrolysis resistance very good chemical resistance very good radiation resistance food processing industry pumps, valves medical equipment PEI: up to 0 C high strength and rigidity even at higher temperatures very good electrical and thermal properties high flame resistance other HIGH PERFOR MANCE MATERIALS electrical insulators loadbearing components for higher temperatures 35

38 other HIGH PERFORMANCE MATERIALS Rods PPSU, PSU reference (DIN) PPSU black PSU density (g/cm 3 ) 1,29 1,24 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,5 +0,2 +1,2 +0,2 +1,2 +0,2 +1,6 +0,3 +2,0 +0,4 +3,0 +0,6 +3,8 Additional dimensions available on request! CENTRO HPM PPSU black 0,167 0,288 0,443 0,695 0,985 1,7 2,7 stock lengths: Ø mm: mm, Ø mm: 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) CENTRO HPM PSU, translucent yellow 0,7 0,424 0,945 1,6 2,6 6,6,4 Rods PPSU, PSU reference (DIN) PEI density (g/cm 3 ) 1,27 diameter tolerance diameter weight (mm) (inch) (mm) (kg/m) 12,7,4 38,1,8 76,2 1,6 1/ / ,0 +0, +0,0 +0, +0,0 +0, +0,0 +0, +0,0 +6, +0,0 +6, Additional dimensions available on request. CENTRO HPM PEI, translucent yellow 0,162 0,648 1,459 2,594 5,836,369 stock lengths: Ø 12,7,8 mm: 24 mm, Ø 76,2 1,6 mm: 12 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 36

39 CENTROLEN CENTROLEN Polyolefins PE PP easy to work and versatile CENTROLEN is characterised by low density, good machinability, high chemical resistance. CENTROLEN materials are nontoxic. CENTROLEN PPH: very good chemical resistance does not swell can easily be welded CENTROLEN PP TV: reinforced PP with talc high rigidity largely nonwarping noise and vibration damping very good machinability low density can be welded low water absorption filter housings chemical pump components apparatus engineering components for the electrical industry housings covers CENTROLEN PEHD: water repellant does not swell high stress cracking resistance high chemical resistance CENTROLEN PPs: flame resistant PP can easily be welded good mechanical characteristics exhaust systems for heating systems apparatus engineering CENTROLEN PP GF: % glass fibre reinforcement higher impact resistance improved heat form retention (up to 1 C) high dimensional stability apparatus engineering machines in the foodstuffs industry CENTROLEN PEUHMW: very low sliding friction coefficient very high impact resistance high abrasion resistance CENTROLEN PP LF: very good surface or volume conductivity high stress cracking resistance good chemical resistance filter heads and housings conveyor equipment for flammable liquids pump bodies for mining air filter housings fan blades fittings with high loads CENTROLEN CENTROLAB glide strips pump components wearing parts 37

40 CENTROLEN Rods PE PP Continue right page reference (DIN) PEHD PEHD black PEUHMW PPH density (g/cm 3 ) 0,96 0,96 0,94 0,91 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,6 +0,2 +0,7 +0,2 +0,8 +0,2 +1,0 +0,2 +1,1 +0,2 +1,2 +0,2 +1,3 +0,2 +1,5 +0,3 +1,7 +0,3 +2,0 +0,3 +2,0 +0,3 +2,3 +0,3 +2,3 +0,3 +2,5 +0,3 +2,5 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 +0,7 +4,2 +0,8 +4,6 +0,8 +4,6 +0,8 +4,6 +0,9 +5,4 +1,0 +5,8 +1,1 +6,3 +1,1 +6,3 +1,2 +7,4 +1,3 +8,5 +1,3 +8,5 +1,3 +9,0 +1,3 +9,5 +1,3 + +1,3 +12 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% CENTROLEN PEHD CENTROLEN PEHD CENTROLEN PEUHMW CENTROLEN PPH black 0,082 * 0,119 * 0,184 * 0,327 0,6 * 0,7 0,988 * 1,2 1,6 * 2,0 2,3 * 2,8 3,3 * 3,9 4,490 * 5, * 6,4 7,9 9, * 11,3 12,4 * 13,3 *,5 * 17,900,3,0 * 32,0 42,000,000 71,0 98,000 * 0,082 * 0,119 * 0,184 * 0,327 0,6 0,7 0,988 * 1,2 1,6 * 2,0 2,3 * 2,8 * 3,3 * 3,9 4,490 5, 6,4 7,9 9, 11,3 12,4 * 13,3,5 * 17,900,3,0 32,0 42,000,000 71,0 * 98,000 * * discontinued standard dimensions, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 0,3 0,7 1,2 2,0 2,9 3,0 5, 6,0 8,000 12,0 17,0 0,078 0,114 0,176 0,312 0,484 0,694 0,947 1,2 1,5 1,9 2,0 2,7 3,1 3,7 4,2 4,8 6,1 7,6 9,2,9 11,900 12,7 14,9 17,1 19,,3 24,6,890 38,0 47,900 58,0 68,0 93,000 * * * * * * * * * * * * * * * * * * * 38

41 Rods PE PP Continuation reference (DIN) PPH beige PP LF black PP TV black density (g/cm 3 ) 0,91 1,04 1,22 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,6 +0,2 +0,7 +0,2 +0,8 +0,2 +1,0 +0,2 +1,1 +0,2 +1,2 +0,2 +1,3 +0,2 +1,5 +0,3 +1,7 +0,3 +2,0 +0,3 +2,0 +0,3 +2,3 +0,3 +2,3 +0,3 +2,5 +0,3 +2,5 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 +0,7 +4,2 +0,8 +4,6 +0,8 +4,6 +0,8 +4,6 +0,9 +5,4 +1,0 +5,8 +1,1 +6,3 +1,1 +6,3 +1,2 +7,4 +1,3 +8,5 +1,3 +8,5 +1,3 +9,0 +1,3 +9,5 +1,3 + +1,3 +12 Additional dimensions available on request. CENTROLEN PPH CENTROLEN PP LF CENTROLEN PP TV beige black black 0,078 * 0,114 * 0,176 * 0,312 * 0,484 0,694 0,947 * 1,2 1,5 * 1,9 2,0 * 2,7 3,1 * 3,7 4,2 * 4,8 6,1 7,6 9,2,9 * 11,900 * 12,7 14,9 * 17,1 19,,3 * 24,6,890 38,0 47,900 58,0 68,0 93,000 stock lengths: mm, 00 mm tolerance length: 0% to + 3% 0,352 0,545 0,781 1,383 2,169 3,1 4,227 5,534 7,0 8,659 12,482 16,989 19,9 28,1 34,8 43,819 53,973 77,453 * discontinued standard dimensions, then nonstandard item nonstandard item (not available from stock, underlies minimum order quantity) 0,413 0,6 0,917 1,623 2,545 3,655 4,958 6,492 8,223,8,8 19,9 22,886 33,034,832 CENTROLEN CENTROLAB 39

42

43 CENTROLAB CENTROLAB HT Tailormade material for hightech applications CENTROLAB HT is an innovative polypropylenebased compound material bridging the gap between polyolefins and engineering thermoplastics. Special admixtures enable CENTROLAB HT applications particularly at higher temperatures (up to 1 C) together with high mechanical load. CENTROLAB HT: low density high mechanical strength higher temperature and chemical resistance versatile machinability physiologically compatible High strength, hardness and rigidity good friction and wear behaviour excellent electrical insulating properties outstanding thermal dimensional stability, even at higher temperatures heavy duty sliding elements pump components, roller applications chemical container and apparatus engineering sterilizers CENTROLEN CENTROLAB 41

44 CENTROLAB Rods PPHT reference (DIN) PPHT white density (g/cm 3 ) 0,93 diameter tolerance diameter weight (mm) (mm) (kg/m) ,1 +0,6 +0,2 +0,8 +0,2 +1,0 +0,2 +1,1 +0,2 +1,2 +0,2 +1,3 +0,2 +1,5 +0,3 +1,7 +0,3 +2,0 +0,3 +2,0 +0,3 +2,3 +0,3 +2,5 +0,3 +2,5 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 Additional dimensions available on request. CENTROLAB HT white 0,079 0,178 0,3 0,488 0,699 1,001 1,237 1,569 1,9 2,421 2,786 3,269 3,7 4,949 6,268 7,744 stock lengths: mm, 00 mm; tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) 42

45 Plates / Sheets PPHT reference (DIN) PPHT white density (g/cm 3 ) 0,93 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) 12 Additional dimensions available on request. +0,5 +3,5 CENTROLAB HT white 5,4 6,241 7,692,111 12,5,239,077 24,914 29,994 stock lengths: / 00 mm; tolerance length: 0% to + 3% tolerance width: +1 % to +4 % nonstandard item (not available from stock, underlies minimum order quantity) Tubes PPHT reference (DIN) density (g/cm 3 ) CENTROLAB HT outer diameter inner diameter tolerances tolerances weight (mm) (mm) outer diameter inner diameter (kg/m) Tubes made of PPHT are available on request. CENTROLEN CENTROLAB 43

46

47 CENTROCARB CENTROCARB PC transparent and with high dimensional stability CENTROCARB in industrial quality is a transparent or semitransparent plastic with high strength and impact resistance at lower temperatures. CENTROCARB has excellent electrical insulating properties and is nontoxic. CENTROCARB: extruded, unreinforced PC tough, hard, and dimensionally rigid very good electrical insulating properties nontoxic CENTROCARB GF: % glass fibre reinforced PC very high strength improved service temperature (up to 1 C) higher tensile modulus of elasticity high strength and impact resistance good thermal dimensional retention, even at low temperatures very high dimensional stability good electrical insulation properties can be bonded and welded containers distributor blocks optical components structural elements insulating components 45 CENTROCARB CENTROSOL

48 CENTROCARB Rods PC reference (DIN) PC PC GF density (g/cm 3 ) 1, 1,43 diameter tolerance diameter weight (mm dia.) (mm) (kg/m) +0,1 +0,5 +0,2 +1,2 +0,2 +1,2 +0,2 +1,6 +0,2 +1,6 +0,3 +2,0 +0,3 +2,5 +0,4 +3,0 +0,4 +3,0 +0,6 +3,8 +0,8 +4,6 Additional dimensions available on request. CENTROCARB 0,1 0,1 0,1 0,632 0,902 1,3 1,0 2,3 3,6 4,877 6,385 9,992,0 stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) CENTROCARB GF 0,121 0,1 0,481 0,753 1,074 1,552 1,907 2,983 4,298 5,812 7,9 11,907 18,590 46

49 Plates / Sheets PC reference (DIN) PC PC GF density (g/cm 3 ) 1, 1,43 thickness width tolerance thickness weight (mm) (mm) (mm) (kg/m) ,5 +5,0 +0,5 +5,0 +0,5 +5,0 Additional dimensions available on request. stock lengths: mm, 00 mm tolerance length: 0% to + 3% tolerance width: 1% to + 4% CENTROCARB 6,586 8,053 9,9 13,046 16,167 19,663 22,784,905 29,026 32,148 38,2 63,019 78,2 nonstandard item (not available from stock, underlies minimum order quantity) CENTROCARB GF 7,848 9,596 11,828,547 19,266 23,432,871 38,9 47 CENTROCARB CENTROSOL

50

51 CENTROSOL CENTROSOL ABS high rigidity and hardness even at low temperatures CENTROSOL has good scratch resistance and very good mechanical properties. CENTROSOL has low tension crack formation and is nontoxic. CENTROSOL: good scratch resistance nontoxic nonfading with high surface finish high surface resistance high volume resistance CENTROSOL LF: permanently conductive no filling with carbon black excellent rigidity great hardness usable to 45 C low electrostatic charging support components for the semiconductor industry operation components for electrical equipment and precision mechanics 49 CENTROCARB CENTROSOL

52 CENTROSOL reference (DIN) ABS ABS LF (cream) density (g/cm 3 ) 1,05 1,07 diameter tolerance diameter weight (mm dia.) (mm) (kg/m) Rods ABS +0,2 +1,2 +0,2 +1,2 +0,2 +1,2 +0,2 +1,5 +0,3 +2,0 +0,3 +2,3 +0,3 +2,5 +0,4 +3,0 +0,5 +3,4 +0,6 +3,8 +0,7 +4,2 +0,8 +4,6 +0,9 +5,4 +1,0 +5,8 Additional dimensions available on request. CENTROSOL 0,355 0,551 0,789 1,397 2,190 3,145 4,267 5,587 7,077 8,743,584 13,6 17,3 19,697 stock lengths: mm, 00 mm tolerance length: 0% to + 3% nonstandard item (not available from stock, underlies minimum order quantity) CENTROSOL LF (cream) 0,362 0,561 0,4 1,423 2,232 3,5 4,348 5,694 7,212 8,909,786 13,9 17,479,072

53 51 CENTROCARB CENTROSOL

54 MATERIAL PROPERTIES (PART 1) Physical properties, guide values (1) values for dry material [deviations are possible for saturated material] Polyoximethylene Copolymer Polyoximethylene + PEUHMW Polyoximethylene + PTFE Polyoximethylene Polyoximethylene % glass fibre Polyoximethylene conductive CENTRODAL C CENTRODAL G CENTRODAL TF CENTRODAL W CENTRODAL GF CENTRODAL LF basic mechanical electric thermal Method of Property verification Unit Density Moisture pickup till saturation (in normal climate 23 C/% r.h.) Water absorption till saturation (in water at 23 C) Food compliance (3) Tensile stress at yield [v = mm/min] / Tensile stress at break [v = 5 mm/min] Nominal percentage elongation at break Tensile modulus of elasticity Flexural modulus of elasticity Ball indentation hardness (value at sec.) Rockwell hardness (measured with test pieces mm thick) Charpy impact strength (+23 C) Charpy impact strength notched (+23 C) Specific insulation resistance [>] Specific surface resistance [>] Dielectric constant Dissipation factor Dielectric strength K/K (in transformer oil) Comparative tracking index (CTI) Temperature for usage in air Minimum service temperature in air at 1 MHz (3) at Hz (3) at 1 MHz (3) at Hz (3) (max. short term) (max. lasting) heat distortion temperature (HDT A process bending temperature under stress 1,8 MPa) Coefficient of linear expansion (at length, 23 C) Thermal conductivity (+23 C) Flammability according UL Standard (thickness 3 and 6 mm) Vicat softening temperature (VST/B/) Melting point (DSC, K/min) ISO 1183 ISO 62 ISO 62 BfR / FDA ISO 5272 ISO 5272 ISO 5272 ISO 178 ISO 391 ISO 392 ISO 179/1eU ISO 179/1eA IEC 093 IEC 093 IEC 2 IEC 2 IEC 2 IEC 2 IEC 2431 IEC 112 ISO 752 ISO DIN UL 94 ISO 6 ISO 3146 g/cm 3 % % MPa % MPa MPa MPa kj/m 2 kj/m 2 Ohm * m Ohm 6 Hz 2 Hz 6 Hz 2 Hz kv/mm C C C C 4/K W/(K*m) Class C C POM C / black 1,41 0, 0, yes/yes (5) 63 / M ,8 3,8 0,008 0, ,1 0,31 HB POM+PE blue 1,35 0, 0, yes/yes 43 / ,8 3,8 0,007 0, ,4 HB POM+PTFE 1,52 0, 0,65 yes/yes 48 / ,7 3,7 0,008 0, ,2 0, HB POM W 1,41 0, 0, yes/yes (6) 63 / M ,8 3,8 0,008 0, ,1 0,31 HB POM GF black 1, 0,17 0,90 no/no 135 / ,3 4,3 0,006 0, ,4 HB POM LF black 1,45 0, 0, no/no 63 / M , ,1 0, HB g/cm 3 = kg/m 3 ; 1 MPa = 1 N/mm 2 ; 1 KV/mm = 1 MV/m (1) PLEASE NOTE: The data is based on average values provided by our main raw material suppliers, or our own measurements and correspond to our latest state of knowledge. Specifications may change with different raw material suppliers, but all necessary checks are made. The suitability of the products for a special application can not be guarenteed legally binding. All data is approximate and for general information (errors and misprints excepted). They do not represent guaranteed property values and they should not be used for specification purposes, or as general construction fundamentals. They do not relieve customers from the necessity of checking for suitability. (2) at thickness 1,6 mm (3) values do not apply to black colored qualities (4) tensile strength (testing speed v=5 mm/min) (5) also applicable for black material (6) tested and certified for use with drinking water n.br. = without break n.a. = not applicable o.r. = on request r.h. = relative humidity 52

55 Polyethylene terephtalate Polyethylene terephtalate with lubricant Polyamide 6 extruded Polyamide 6 cast Polyamide 6 % glass fibre Polyamide 6.6 Polyamide 6.6 % glass fibre Polyamide 6.6 % carbon fibre Polyamide 12 Polyamide 12 % glass fibre Polyamide 12 soft Polyamide 12 LE soft Polyvinylidene fluoride Polyphenyle ether modified CENTROLYTE CENTROLYTE ZX CENTROMID 6 E CENTROMID 6 G CENTROMID 6 GF CENTROMID 6.6 CENTROMID 6.6 GF CENTROMID 6.6. CF CENTROMID 12 CENTROMID 12 GF CENTROMID 12 soft CENTROMID 12 LE soft CENTROFLON CENTROPHEN PET 1,39 0, 0, yes/yes PET ZX light grey 1,45 0,23 0,47 yes/yes PA 6 E / black 1,14 2, 9 yes/yes PA 6 Cast / black 1, 2, 6, yes/yes PA 6 GF black 1,34 2, 6, no/no PA 6.6 1,14 2, 8 yes/yes PA 6.6 GF black 1,34 1, 5, no/no PA 6.6 CF black 1,23 2, 6, no/no PA 12 1,04 0, 1, yes/yes PA 12 GF 1,23 0, 1, no/no PA 12 soft 1,03 0, 1,00 no/no PA 12 LE soft 1,00 0, 1, yes/no PVDF 1,78 0,04 0,04 yes/yes PPE grey 1,06 0,06 0,23 no/no 90 / / / 85 / 1 / 90 / / 2 / / / 5 / / / 55 / 30 1 M 95 > ,2 3,4 0,014 0, M 94 > 2, ,2 3,4 0,014 0, > 32 1 M 85 n.br. 5, ,3 3,9 0,021 0, M 88 n.br. 3, ,2 3,6 0,016 0, > > M 88 n.br ,3 3,8 0,0 0, M 76 > , > M n.br ,6 0, , > 0 64 n.br. n.br. 12 3, > 3 n.br. n.br > 00 M 75 n.br ,5 0,165 0, ,7 0, ,6 0,27 HB 5 0,65 0,29 HB 5 0,9 0,28 HB 2 0,8 0,29 HB 2 0,26 0,28 HB 2 0,8 0,28 V2 (2) 2 0,5 0, HB 5 0, 0,43 HB 2 1,2 0, ,2 0, ,0 HB 178 1,2 0,19 V ,22 HB MATERIAL PROPERTIES

56 MATERIAL PROPERTIES (PART 2) Physical properties, guide values (1) values for dry material [deviations are possible for saturated material] Polyphenylene ether % glass fibre Polyphenylene sulfide Polyphenylene sulfide impact resistant Polyphenylene sulfide, impact resistant, % glass fibre Polyphenylene sulfide % glass fibre Polyetheretherketone CENTROPHEN GF CENTROTRON CENTROTRON SKX CENTROTRON GF CENTROTRON GF CENTROPEEK basic mechanical electric thermal Method of Property verification Unit Density Moisture pickup till saturation (in normal climate 23 C/% r.h.) Water absorption till saturation (in water at 23 C) Food compliance (3) Tensile stress at yield [v = mm/min] / Tensile stress at break [v = 5 mm/min] Nominal percentage elongation at break Tensile modulus of elasticity Flexural modulus of elasticity Ball indentation hardness (value at sec.) Rockwell hardness (measured with test pieces mm thick) Charpy impact strength (+23 C) Charpy impact strength notched (+23 C) Specific insulation resistance [>] Specific surface resistance [>] Dielectric constant Dissipation factor Dielectric strength K/K (in transformer oil) Comparative tracking index (CTI) Temperature for usage in air Minimum service temperature in air at 1 MHz (3) at Hz (3) at 1 MHz (3) at Hz (3) (max. short term) (max. lasting) heat distortion temperature (HDT A process bending temperature under stress 1,8 MPa) Coefficient of linear expansion (at length, 23 C) Thermal conductivity (+23 C) Flammability according UL Standard (thickness 3 and 6 mm) Vicat softening temperature (VST/B/) Melting point (DSC, K/min) ISO 1183 ISO 62 ISO 62 BfR / FDA ISO 5272 ISO 5272 ISO 5272 ISO 178 ISO 391 ISO 392 ISO 179/1eU ISO 179/1eA IEC 093 IEC 093 IEC 2 IEC 2 IEC 2 IEC 2 IEC 2431 IEC 112 ISO 752 ISO DIN UL 94 ISO 6 ISO 3146 g/cm 3 % % MPa % MPa MPa MPa kj/m 2 kj/m 2 Ohm * m Ohm 6 Hz 2 Hz 6 Hz 2 Hz kv/mm C C C C 4/K W/(K*m) Class C C PPE GF 1, 0,06 0, no/no / 1, ,9 0, ,28 HB PPS 1,35 0,02 o.r./o.r. / 90 (4) M ,6 0, V 0 PPS SKX 1, 0,03 o.r./o.r. > 0,2 44,7 2 1 V 0 PPS GF anthracite 1,41 0,02 no/no / 86 (4) 2, V 0 PPS GF / black 1,65 no/no / 185 (4) 1, V 0 PEEK 1,31 0, 0,45 yes/yes 1 / 40 2 M 5 n.br. 3, ,6 3,2 0,002 0, ,5 0, V 0 3 1g/cm 3 = kg/m 3 ; 1 MPa = 1 N/mm 2 ; 1 KV/mm = 1 MV/m (1) PLEASE NOTE: The data is based on average values provided by our main raw material suppliers, or our own measurements and correspond to our latest state of knowledge. Specifications may change with different raw material suppliers, but all necessary checks are made. The suitability of the products for a special application can not be guarenteed legally binding. All data is approximate and for general information (errors and misprints excepted). They do not represent guaranteed property values and they should not be used for specification purposes, or as general construction fundamentals. They do not relieve customers from the necessity of checking for suitability. (2) at thickness 1,6 mm (3) values do not apply to black colored qualities (4) tensile strength (testing speed v=5 mm/min) (5) also applicable for black material (6) tested and certified for use with drinking water n.br. = without break n.a. = not applicable o.r. = on request r.h. = relative humidity 54

57 Polyphenylsulphone Polyetherimide Polysulfphone Polyethylene high density Ultrahigh molecular weight Polyethylene Polypropylene homopolymeric Polypropylene flame resistant Polypropylene conductive Polypropylene + talc Polypropylene higher temperatures Polypropylene % glass fibre Polycarbonate Polycarbonate % glass fibre Acrylnitrile butadiene Styrene copolymer Acrylnitrile butadiene Styrene copolymer conductive CENTRO HPM CENTRO HPM CENTRO HPM CENTROLEN PEHD CENTROLEN PEUHMW CENTROLEN PPH CENTROLEN PPs CENTROLEN PP LF CENTROLEN PP TV CENTROLAB HT CENTROLEN PP GF CENTROCARB CENTROCARB GF CENTROSOL CENTROSOL LF PPSU black PEI amber transparent PSU yellow transparent PEHD / black PEUHMW / black PPH / beige PPs middle grey PP LF black PP TV black PPHT white PP GF PC colorless transparent PC GF ABS ABS LF (creme) 1,29 0, 1, yes/yes 1,27 0,75 1,35 yes/yes 1,24 0, 0,85 yes/yes 0,96 0,01 yes/yes 0,94 0,01 yes/yes 0,91 0,01 yes/yes 0,92 no/no 1,04 < 0, no/no 1,22 yes/o.r. 0,93 yes/yes 1, 0, yes/no 1, 0, 0,35 yes/yes 1,43 0,08 0, no/no 1,05 0, 1,00 o.r./o.r. 1,07 no/no 76 / 5 / / / / / / 33 / 33 / 85 / / / / 27 / 35 2 M n.br ,5 3,4 0,005 0, M 114 n.br. 3, ,0 3,0 0,002 0, M 91 n.br ,0 3,0 0,003 0, > n.br ,3 2,3 0,0002 0, > 0 n.br ,0 2,3 0,00 0, > 67 n.br n.br. 12 2,3 0, n.br. 32 < 3 < 3 > ,3 0,0004 > > > 1 M 75 n.br ,9 3,0 0,009 0, ,5 3,6 0,008 0, , < > ,55 0,35 V 0 n.a. 0,45 0,22 V 0 n.a. 0, 0,26 HB n.a. 2,0 0,37 HB ,0 0,41 HB 135 1,5 0,22 HB ,17 V HB HB 0,86 HB ,28 HB ,65 0,21 HB 1 0,4 0,24 V ,2 HB MATERIAL PROPERTIES