Flat Top Product Guide 2007

Similar documents
Tap Nomenclature. Key:

TC burrs for tough applications especially in foundries, dockyards and steel constructions

A New Wiper Insert Line Now Available for Gold Rhino

Side Cutter with Low Cutting Resistance

CoroDrill Delta-C DRILLING. A Milling. C Deep hole. D Boring. F Indexes. The solid carbide drill a precision tool for high productivity hole making

Threading Inserts UPDATED

HyperCoat CTPM125 EN

Power Module Installation Notes for TELP Series

AHP evaluation of different debris-removing methods Jingying Miao1, a

Ultra Final Series bearings for clean environment with enhanced durability and lower particle generation at high temperatures, clean rooms and

Cross-Roller Ring Series

A New Wiper Insert Line, Now Available for RHINORUSH

Setting new standards for milling tools

Springback Simulation with Complex Hardening Material Models

Concentric Induction Heating for Dismantlable Adhesion Method

PcBn for cast iron Machining

PRODUCT HIGHLIGHTS. The Grades. Cutting tool materials suitable for universal use WPV10 (ISO P10) FV5: Finishing ISO M (Stainless Steel)

INDOOR FOOTBALL FIELD

4 STRUCTURAL MODELLING

Super Precision Bearings for Machine Tools

OUTDOOR FOOTBALL FIELD

Analysis of Electric Stress in High Voltage Cables Containing Voids

UNITS ORKOT C322 (TLM MARINE) TXM MARINE

INDOOR FOOTBALL FIELD

Study on the Total Amount Control of Atmospheric Pollutant Based on GIS

OPTIMIZATION OF FILLER METALS CONSUMPTION IN THE PRODUCTION OF WELDED STEEL STRUCTURES

E T HIGH PERFORMANCE MULTI-MATERIAL MILLING. The Mastermill VX range: Exceptional performance and reliability. UROPA OOL

Structure Integrity Assessment of a Windflow Power Plant s Axle

CONICAL PIPE ENVELOPE FORMATION PROCESS

machine design, Vol.6(2014) No.3, ISSN pp

Series 878 TAB TAB TAB - 880M 879M TAB - 882M. Sideflexing plastic chains

Straight running slat-band chains made of steel and stainless steel

AN444 APPLICATION NOTE TRANSISTOR PROTECTION BY TRANSIL: DISSIPATION POWER AND SURGE CURRENT DURATION

Burrs. Table of Contents 2 I 202. Tool drive Contents Page HSS cutters (HSS = High-performance, high-speed steel) HSS rotary cutters 43-49

Estimating Fish Abundance - Mark Recapture Method

Lecture 3 Activated sludge and lagoons

Stacking Spheres. The dimensions of a tetrahedron. The basic structure of a stack of spheres is a tetrahedron.

FOOTHILL TECHNOLOGY CENTER MONROVIA, CALIFORNIA 91016

METAL TABLETOP CHAINS

ADDRESS: 3500 LOADSTONE DRIVE INTERIOR REMODEL / ADDITION SHERMAN OAKS, CA OWNER: JASON LUI. Sheet S0.0 CONNECTION NAILING.

Conceptual Design. and Cost Estimate. for a Phased. Wastewater. Collection and. Treatment System. Clearwater River. Wenck. Watershed District

A Note on Void Ratio of Fibre-Reinforced Soils

Self-assessment for the SEPA-compliance of infrastructures

ASSESSMENT OF MATERIAL BEHAVIOUR AND STRUCTURAL INTEGRITY OF ENGINEERING STRUCTURES BASED ON R6 PROCEDURE

Ratatouille. for flute, trumpet, violin, and cello. markfrederickthorvaldgurrola

GUIDE FOR THE DESIGN OF CRANE-SUPPORTING STEEL STRUCTURES

Journal of Chemical and Pharmaceutical Research, 2014, 6(6): Research Article

FUEL CELLS IN SHIPPING: HIGHER CAPITAL COSTS AND REDUCED FLEXIBILITY

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

uni Material Selection

PRODUCT CONTROL SECTION

GenomeLab GeXP Genetic Analysis System

5.5 Alternative 3: Nonstructural Flood Protection

PERFORMANCE ANALYSIS OF INTERNALLY REFORMED MCFC/IT-SOFC COMBINED CYCLE

Determination of sugars in spirit drinks of viti-vinicultural origin

THE EFFECT OF SHEAR STRENGTH NORMALISATION ON THE RESPONSE OF PILES IN LATERALLY SPREADING SOILS

Re-Designing a Customer Satisfaction and Loyalty Program via Linkage

The 3-D finite element analysis of press fitting process in railway wheel-set

A Shaking Table Test Design on Seismic Strengthened Brick Masonry Structures

Agricultural Trade Developments and Future Prospective in China

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

HIGH POSITIVE GEOMETRIES

PREFACE BAILEY METAL PRODUCTS LIMITED

Cascade Uses of Geothermal Energy in Sabalan - Iran

12 - RIGHT ANGLE DRIVES

The 23 rd. Corresponding author: Tel ,

Numerical Analysis of Current Attachment at Thermionic Cathode for Gas Tungsten Arc at Atmospheric Pressure

thermoplastic straight running chains

Sea-Level Rise and Coastal Wetlands Impacts

N.B.: Upon request, all our chains can be produced with other types of stainless steel. Minimum temperatures o

ZT VSD Product Description

FOR IMMEDIATE RELEASE TUESDAY, JULY 3, 2012, AT 10:00 A.M. EDT

POSITIVE METALLURGICAL RESULTS FOR THE TAMPIA GOLD PROJECT

Out-of-Merit-Order Dispatch

Precision Management of Nutrients, Water, & Seeds: A Holistic Approach

Numerical Simulation of Gas Tungsten Arc Welding in Different Gaseous Atmospheres. Tashiro, Shinichi; Tanaka, Manabu; Ushio, Masao

10.2% 2.5% FY19 to FY21

The Research of Risk Management in Two Non-Independent IT System

Investigation of a Dual-Bed Autothermal Reforming of Methane for Hydrogen Production

MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)

DEFECT ASSESSMENT ON PIPE USED FOR TRANSPORT OF MIXTURE OF HYDROGEN AND NATURAL GAS

Table of Contents. I. Introduction II. How To Use This Catalog Drives Idle End Conveyor Beams...

DECARBURIZATION OF FERROCHROME AND HIGH ALLOY STEELS WITH OPTIMIZED GAS AND SLAG PHASES TOWARDS IMPROVED Cr RETENTION

Key Principles in Evaluating Chains for Packaging Applications

Minimizing Carbon Leakage under Open Trade: Strategies for the Allocation of Pollution Permits

The impact of velocity on thermal energy storage performance of tube type thermocline tank

MULTI-OBJECTIVE OPTIMIZATION OF PLANNING ELECTRICITY GENERATION AND CO 2 MITIGATION STRATEGIES INCLUDING ECONOMIC AND FINANCIAL RISK

Oregon and Washington). The second major study used for this report is "Parks and Recreation Information

SANITARY ENGINEERING ASSISTANT, 7866 SANITARY ENGINEERING ASSOCIATE, 7870 SANITARY ENGINEER, 7872

DEPENDENCE OF FUEL CONSUMPTION OF MEDIUM POWER TRACTOR ON DIFFERENT SOIL AND TIRE DEFORMATIONS

Compaction. Soil Compaction I. What is Consolidation. What is Compaction? Chapter 4 Dr. Talat A Bader

Emad Alhseinat and Roya Sheikholeslami

Surface Water Hydrology

Solar in Wetlands. Photo credit: a k e.org/blog/2012/08/15mw solar field near philadelphia.html

Multi-year Expert Meeting on Transport, Trade Logistics and Trade Facilitation:

ScienceDirect. Measuring solid liquid interfacial energy by grain boundary groove profile method (GBG)

Proposed heat treatment conditions to improve toughness of steel grinding balls

Chapter 5 Holes and notches Contents

Transcription:

Flat To Poduct Guide 07

TA OF CONTNTS NGIND AND PUCD IT ONG ASTING VAU IN MIND CAON AND STAINSS ST FAT TOP CAINS s Used in Chain Poduction Staight un: Single-inge /5 4 Staight un: Double-inge D Seies 5 Staight un: ubbe To Seies 6 Staight un: " Pitch Seies 55 7 Side-Flexing: Seies Side-Flexing: Otimal Seies Side-Flexing: Magnetic system M Seies PASTIC FAT TOP CAINS s Used in Chain Poduction Staight un: Single-inge / Staight un: Double-inge Staight un: Mini-inge Seies 4 Staight un: P Seies / 5 Side-Flexing: P Seies 6 Side-Flexing: /7 Seies 7 Side-Flexing: Seies Side-Flexing: Magnetic System 7//57M PASTIC TO-PIC SNAP TOP CAINS Staight un: 4 Seies Staight un: 6 Seies Side-Flexing: 4 Seies Side-Flexing: 7 Seies PASTIC MUTIP FXING CAINS Novoflex Seies 700/70 TA/70 4 70 Seies Tos and Pushes PASTIC CONVYO CAINS Side-Flexing: CC 0/CC 0 Seies 6 Malleable Ion and Sockets CC0/0 7 SPIT PASTIC SPOCTS SPIT PASTIC IDS STANDAD SPOCTS IN ST- CAST ION/PASTC 0- COMPACT CUV AND STAIGT- GUIDING SCTIONS - SPOCTS FO TOP CAINS/GUIDING INGS 4 A STIPS 5 COOSION SISTANC TA 6 PMISSI CAIN OING OADS 7 NVIONMNTA ISSUS AND FICTIONA VAUS DSIGN INFOMATION www.flattosystems.com Coyight 05 CAON & STAINSS ST FAT TOP CAINS s Used in Chain Poduction. Cabon Steel : C (medium cabon) though hadened Pin : C5 (low cabon) cabuized and case hadened Poeties: Though hadening to lates to -46 c ovides high stength, toughness and excellent esistance to wea abasion. Cabuizing chain ins esults in high suface hadness, aoximately c, which ovides excellent wea oeties while maintaining a ductile coe fo shock esistance. These chains ae aticulaly well suited fo glass manufactuing and fo handling heavy-duty automotive comonents. Note: This mateial will ust if not oely lubicated.. Stainless Steels. Standad (0 Seies) : AISI (N.6) Pimay Alloy: 7% Chomium Pin : AISI 4 (N.57) Poeties: ust and coosion esistant stainless which offes an economical ice stuctue. Accetable fo use in alications whee high seed o esistance to chemicals ae not oeating consideations.. xta Secialty Stainless : N. xta Pimay Alloys: 5.5% Chomium,.5% Nickel,.% Molybdenum, 0.5% Titanium Pin : Secial C-Ni Stainless which undegoes an additional hadening ocess secifically designed to not imai coosion esistance. Poeties: A unique stainless steel featuing an additional level of cold olling which aises both the tensile stength and suface hadness significantly. This ocess also ceates a vey flat and smooth suface which is necessay fo high seed bottling lines. The hadened in ovides excellent esistance to wea and galling even unde hash conditions whee lubication may not be ossible. Secification U.T.S. N/ (P.S.I.) COMPAISON CAT adness inell adness ockwell C. Austic (00 Seies) : AISI 04 (N.) Pimay Alloys:.0% Chomium,.0% Nickel Pin : AISI 0 (N.4) Poeties: The taditional Austenitic gade of stainless steel which ovides excellent chemical and acid esistance. This mateial is non-magnetic. Note: xta chains ae available with vaccuum hadened ins = Coosion o Chemical esistance Alication Medium 0 igh ea 4-0 -46 Poo Cabon (0,000) esistance AISI 7 conomical -0 - ow (0 Seies) (,000) Nomal duty xclusive 00 igh Seed 70-00 7-0 igh C-Ni-Mo-Ti (,000) ottling ines AISI 04 Acid esistant -70 4-7 xcellent (00 Seies) (,000) Non-Magnetic Cost Facto $

CAON & STAINSS ST FAT TOP CAINS Staight un: Double-inge /5 (D) Seies Available s: Cabon Steel 0 Seies Stainless Steel Secialty Stainless Steels These chains, built in accodance with ISO (.7), ae double-hinge staight unning conveyo chains. D seies featue a hinge aea twice that of the /5 seies. This allows much highe loads to be conveyed in such alications as alletizes o heavy cate conveying. Note: These chains ae only available with a late width of 7 /". Chain efeence S 0 7 7 / 0.5 Not Alicable. 5. SS 7 7 / 0.5 4 0.6. 5. SS 5 7 7 / 0.5 0.. 5. Sockets age - Suface Finish Mico Ib/Ft g/m CAON & STAINSS ST FAT TOP CAINS Staight un: Single-inge /5 Seies Available s: Cabon Steel 0 Seies Stainless Steel Secialty Stainless Steels 00 Seies Stainless Steel These chains ae built in accodance with ISO (.7) and ae single-hinge staight unning conveyo chains, all featuing the same hinge aea dimensions. The chains do diffe in tems of late width (maximum 7 /") and mateial gades. A wide selection of stainless steel conveyo chains is available thus oviding the solution to you equiements, whethe they be seed, load, chemical esistance o uely budgetay. The gades of mateials ae clealy defined by symbols which simlifies the selection. The symbol signifies a to late handling ocess called SUPFINIS. This is a fine ginding and olishing oeation which ensues the smoothest and flattest stainless steel chain available. This finish is ideal fo combination bottling lines which may handle both glass and PT bottles o whee sensitive insection devices ae being used. -5 Chain efeence Suface Finish in Mico Ib/Ft g/m S 5 /4.5.75. S 5 0 4.6.0.00 S 5 0 4 / 4. Not Not..0 S 5 0 6 5.4 Alicable Alicable. 4. S 5 7 7 / 0.5.4 5. SS /4.5 4 0.6.75. SS 7 7 / 0.5.4 5. SS 5 /4.5.75. SS 5 /...70 SS 5 0 4.6.0.00 SS 5 0 4 / 4. 4 0.6..0 SS 5 0 6 5.4. 4. SS 5 7 7 / 0.5.4 5. SSA 5 /4.5.75. SSA 5 0 4 / 4. 6 0.4..0 SSA 5 7 7 / 0.5. 5. SSS 5 /4.5 0..75. SSS 5 /...70 0 - - - 5-5 (D Seies) Sockets age - Symbol Descition Inch Metic Symbol Descition Inch Metic P Chain Pitch /. eight Ove C /4 6.4 Thickness /. inge /6 4. Guide Cleaance /4.5 P e tm. lat to Chain tm. /. Pin Diamete /4 6.4 Min. ackflex adius 6.0 Tavel P Chain Pitch /. eight Ove C /4 6.4 Thickness /. inge /64.5 Guide Cleaance /4.5 tm. to Chain tm. /.5 P Diamete in /4 6.4 Tavel 4 5

STAINSS ST FAT TOP CAINS Staight un: Vulcanized ubbe Pad 5/5 Gito Seies Available s: Secialty Stainless Steels with vulcanized ubbe To Pad Cabon Steel late mateial (to ode) These chains wee designed to ovide a to late suface with a gi effect to allow oducts to be inclined on conveyos at an angle of u to. The basic chains utilized ae the 5 and 5 seies in staight unning fomat. These chains ae intended to elace ough to belting fo cate o box handling and ovide the following advantages ove taditional belting: No sliage due to ositive tooth socket dives, one way clutches ae not needed. ighe loading caacities. Planned maintenance imoved as chain wea is easie to monito than the tendency of a belt to tea. Staight unning 5 TA vesion also ovides a method of chain etun which events the ubbe to fom having to un against anothe suface. Chain efeence SS 5 V /4. 76.00 /.00 75.00.0. SS 5 7 V N 7 / 0. 5 5/6 5.00 /.00 6.00.70 5. SS 5 7 V ubbe 7 / 0. 5 5/6 5.00 /.00 6.00 4. 6. SS 5 TA V /4. 76.00 /.00 75.00.0. 5 TA 5 T Tavel ubbe ubbe X 5 X ubbe Thick T T ack end adius Ib/Ft g/m STAINSS ST FAT TOP CAINS Staight un: " Pitch 55 Seies Available s: Secialty Stainless Steels These chains ae built in accodance with ISO (.7) and ae single-hinge staight unning conveyo chains but featue a smalle itch than the oula 5 seies. The itch of " allows comact conveyo designs, esecially suitable fo the tansotation of oducts with naow dimensions. The hinge width is identical to the 5 seies but much smalle late widths ae available. 55 seies ae aticulaly used on the in-feed of bottle washing equiment due to excellent end tansfeability. Symbol Descition Inch Metic P Chain Pitch.4 eight Ove C /4 6.4 Thickness /. inge / 4. Guide Cleaance /4.5 tm. to Chain tm. /. Pin Diamete /4 6.4 Min. ackflex adius 4 0.0 55 Chain efeence Suface Finish in Mico h inc Ib/Ft SS 55 7 5/ 55.0.54. SS 55 6 /64.0.6.4 SS 55 0 / 6.5.6.5 SS 55 5/64 7.0 4 0.6..7 SS 55 /4.5.5. SS 55 /..00.0 SS 55 0 4.6.. g/m Gito 5 V - - 5 5 V V V 5 TA V Sockets age - Tavel Tavel 5 TA.65" 4.5 efeence Socket Tye & Numbe of Teeth Actual ffect. Pitch Cicle Dia. PD Inch Metic Outside Dia. Inch Metic Stock oe Inch Metic Max. oe Inch Metic Ib/ea g/ea Fo geneal chain dimensions efe to elevant catalog ages Chain Tye Page No. 5 5 5 TA (see TA) 5 6 P 6-55- 4. 6.4 4. 0.75.75 4.4.00 6-55-5 Piece 5 5 4..7 4. 4 0.75.0 4 6.4.0 6-55-7 Solid 7 7 5.. 5.55 4 0.75.00 5 7.74. 6-55- Poly- 6.0 54. 6. 57 0.75.75 70.4 4. 6-55- amid 6.7 70.4 6. 7 0.75.5.6 6.00 6-55- 7.4 6.54 7.4 0 0.75.5 5 7.4 7. 6-55- 7..66. 6 0.75. 0.00. 6 7

STAINSS ST FAT TOP CAINS Side-Flexing: Standad Seies Seies Available s: Secialty Stainless Steels 00 Seies Stainless Steel Featuing gound suface finish Side-flexing chains ceate ossibilities to convey oducts aound cones without the use of tuntables o dead-lates. All chains equie a welded guide shoe on the undeside of the chain to ovide a method of hold down in the guide tack. ithout these shoes the chain would have a tendency to lift when oeating in the cuve unde load. Guide shoes ae available in two foms: evel: Utilize an dovetail which ovides a simle but effective anti-lift device. TA: Utilize a ositive etention shoe which fits into a T ofile guide slot. Ideal fo heavie loads. NOT: Following the welding oeation, chains often have slight heat distotion and the aeaance of unsightly weld maks on the to late suface. In ode to estoe the to late to the ultimate in flatness and smoothness. chains eceive a unique ginding and olishing oeation to estoe the to late s smooth suface finish (within 4 Mico es). Chain efeence Min. Side Flex adius Symbol Descition Inch Metic P Chain Pitch /. eight Ove C /4 6.4 Thickness /. Pin Diamete /4 6.4 Min. ackflex adius 6 /.0 Fo evel Chains Ove all /6 4. P e tm. lat to Chain tm. 7/6. Guide Clea. Staight /4.5 Guide Clea. Cuve 5/ 4. Fo TA Chains Ove all /6 4. P e tm. lat to Chain tm. 7/6. G P e tm. lat to Tab To /. Tab 7/ 56.4 Guide Clea. Staight /6 46.0 Guide Clea. Cuve /4.5 Suface Finish in Mico Ib/Ft SS /4.5 7..00. SS 0 4 / 4. 4.6 4 0.6..7 SS 7 7 / 0.5 4.6.70 5.5 SS TA /4.5 7..4. SS TA 0 4 / 4. 4.6 4 0.6.6.0 SS TA 7 7 / 0.5 4.6. 5.70 SSA /4.5 7..00. SSA 0 4 / 4. 4.6 4 0.6..7 SSA 7 7 / 0.5 4.6.70 5.5 SSA TA /4.5 7..4. SSA TA 0 4 / 4. 4.6 4 0.6.6.0 SSA TA 7 7 / 0.5 4.6. 5.70 Sockets age - V TA G g/m STAINSS ST FAT TOP CAINS Side-Flexing: Otimal Seies O (Otimal) Seies Available s: Secialty Stainless Steels Featuing gound suface finish Cabon Steel made to ode Otimal seies is based on taditional side-flexing chains. y otimizing the design of the to lates, the chain s links ae able to nest moe closely, thus oviding imoved oduct stability at high seed. As with the seies, all chains equie eithe a bevel o TA to be welded on the undeside of the chain. These too eceive ou unique ginding oeation to emove any undesiable making fom the welding ocess. A secial featue of the seies is the inclusion of the /" (. ) width. This affods the use an otion othe than the tyical /4" and 4 /" widths. Sockets age - Symbol Descition Inch Metic P Chain Pitch /. eight Ove C /4 6.4 Thickness /. Pin Diamete /4 6.4 Min. ackflex adius /6.0 Fo evel Chains Oveall /6 4. tm. to Chain tm. 7/6. Guide Clea. Staight /4.5 Guide Clea. Cuve 5/ 4. Fo TA Chains Oveall /6 4. tm. to Chain tm. 7/6. G tm. to Tab To /. Tab 7/ 56.4 Guide Clea. Staight /6 46.0 Guide Clea. Cuve /4.5 Otimal Chain efeence Min. Side Flex adius Suface Finish in Mico SS /4.5 7..00. SS /. 7. 4 0.6.. SS 0 4 / 4. 4.6..7 SS 7 7 / 0.5 4.6.70 5.5 SS TA /4.5 7... SS TA /. 7. 4 0.6.. SS TA 0 4 / 4. 4.6.6.0 SS TA 7 7 / 0.5 4.6. 5.70 Also Available in Cabon Steel uon equest. V TA Tavel h Seies O Ib/Ft g/m Note: Seies Chains can un in the same guide tacks and use the same sockets as but they cannot intechange with chains due to the diffeent to late fom. G Seies

STAINSS ST FAT TOP CAINS Side-Flexing: Otimal M Seies Magnetic System Chains M and 57 M chains un in the Dual Magnetic System Cuves. Magnetic System chains ae secuely etained in the cuve by the small emanent magnets, located unde the hinge of the chain in the ue at of the cuve. The M seies chains un in the same Dual Magnetic System cuves as the M and 7 M lastic chains.they have 4 wide hinges, the same as 5 seies, staight un chain, so use standad 5 seies sockets. The 57 M chains, both stainless steel and lastic un in the new, heavy duty Dual Magnetic System cuves. The Novoflex MO (Otimal Seies Chain) is a futhe develoment of the Magnetic System Chain. The standad adius fo most cuves is 0. The MO chain has a diffeent shae which altes the minimum sideflex adius of the between the links. The smalle ga ensues geate oduct stability and less ossibility fo debis to become taed between the links. Seies 57 Stainless steel chains have a wide hinge, 57 to match the hinge of the heavy duty F chains. The wide hinge on the SS 57 M 7 chain means a 5% incease in the tensile stength of this chain comaed to the nomal 4 hinge wide chains. SS 57 M 7, F 57 M 7 and NG 57 M 7 chains have the same hinge width, and will un in the MD 57 Dual Magnetic System cuves.ide sockets ae also available. These sockets ae manufactued fom solid Polyamide and ae also available in slit fom. M MO 57 M Magnetic Systems Flexon -ef SS M- SS M- 0 SS M- 7 SS M- SS M- 0 SS M- 7 SS M0- SSS M- SSS M0- SS 57 M- 7 Seies Seies 57 Sockets age -,5 4, 0,5 and end adius adius min ** N um N g/m,5 4, 0,5 Dimensions in 7 7 6 7 7 6 Guide cleaance Suface Finish Max. oad Caability of Chain (Yield Point) 0,6 50 0, 7000,, 4,0,, 4,0,5,5 0 7 0, 7000 7000,, 0 0,5 0 0, 0 5,0 PASTIC FAT TOP CAINS Used fo Plastic Chain Poduction. Acetal Plastic (POM) Acetal is an engineeing Polyme with an outstanding ange of mechanical oeties. These ae: igh stength and stiffness. Anhydous (will not absob wate). xcellent fatigue esistance. xcellent sliding oeties. xhibits low fiction coefficients. xteme temeatue anges fom to + F ( to C). Acetal chains ae available in two basic gades:. Delin Acetal This is the oiginal basic comound intoduced in the s and contains no self lubicating additives which educe fiction, heat build u, noise and the slistick effect. Fo these easons D Acetal is now aely used as a side-flexing mateial.. ow Fiction Acetal This mateial was develoed in the 70s and contains a small ecentage of PTF which educes its fiction coefficient substantially. F has since become the industy standad fo lastic conveyo chains and is the ideal choice fo most alications. oweve, as industial demands become eve toughe F has cetain limitations unde dy conditions: lack owde oxidation, esecially on high seed aluminum can lines. ea and tea at fast seeds, esecially against UM P weastis. Noise when side-flexing. Stess coosion cacking when conveyos ae washed down with such cleaning agents as ydogen Peoxide. These factos have been edominant in the develoment of ou latest mateial, ceated fo the demands of the next centuy: New Geneation.. New Geneation xclusively develoed in conjunction with DuPont, this mateial looks to the futue equiements of conveying chains: highe seeds, educed lubication, less wea, less tea. The benefits ae clea: igh ea esistance Offes damatically sueio wea life against UM P o Stainless wea stis as well as educing wea between chain and oduct. Imoved Coefficient of Fiction Due to the addition of secial disesed lubicants. Imoved Flatness Offes a new suface finish fo moe accuate conveying. Imoved Chemical esistance Against such cleaning agents as ydogen Peoxide. Imoved Duability asts longe than standad Acetal conveyo chain and can ove moe economical in the long un. igh UV esistance Due to the secial chemical comound a high level of esistance to UV ays is ossible. owe Noise Noise is a facto of the PV atio (Pessue/Velocity) when chains ae foced to un in cuves. The chemical comound of NG vitually eliminates squeaking unde dy conditions. ighe Temeatue imits The highe temeatue ange of u to 0 F ( C) means that NG can often be utilized without going to the exense of a secial and costly igh Temeatue lastic gade.. Secial Puose s (Made to Ode) igh Temeatue Polyme Fo alications exceeding 0 F ( C), a high temeatue gade should be used (fo examle in heat shink tunnels o ovens). In each case lease consult Flexon. Anti-Static This mateial utilizes an Acetal base containing secial additives (including Cabon) which ovide use otection against static chage build u. Often used in the automotive and electonics industies. xta ow Fiction This mateial can be used fo aeas whee an exteme low fiction coefficient is equied. Although extemely slidable the mateial is vey soft due to the amount of additives contained and will wea aidly if weight o essue become too high. * Delin is a egisteed tademak of DuPont.

PASTIC FAT TOP CAINS Staight unning: Single-inge and Seies / Seies Available s: Delin Acetal ow Fiction Acetal New Geneation Anti-Static Acetal Stainless Steel Pins These chains wee designed as the lastic altenative to the stainless steel 5 seies and consequently shae the same basic dimensions. oweve, lastic chains ae not able to withstand the loads caied by steel chains and theefoe a cental einfocing ba is featued on the undeside. Fo this eason the sockets fo and chains ae gooved to allow fo this ba. All and chains featue a secial ovelaing to late system of acuic design which has the dual benefit of eliminating the gas between lates and ceating a self cleaing action to emove debis o dust. chains have the same hinge and oveall dimensions as the seies but featue a thicke to late of /6" which makes them comatible in ide height to the, 7 and seies. PASTIC FAT TOP CAINS Staight unning: Double-inge Seies Seies Novonom - Available s: - Chain efeence Flight Thickness Dimension Ib/Ft g/m D /4.5 0.56 0. D 0 4.6 0.64 0.5 D 0 4 / 4. 5/ 4.0 /.5 0.6.0 D 0 6 5.4 0.4. D 7 7 / 0.5 0..47 F /4.5 0.56 0. F /. 0. 0. F 0 4.6 5/ 4.0 /.5 0.64 0.5 F 0 4 / 4. 0.6.0 F 0 6 5.4 0.4. F 7 7 / 0.5 0..47 F /4.5 0.56 0. F 0 4 / 4. /6 4. /.7 0.6.0 F 7 7 / 0.5 0..47 NG /4.5 0.56 0. NG /. 0. 0. NG 0 4.6 5/ 4.0 /.5 0.64 0.5 NG 0 4 / 4. 0.6.0 NG 0 6 5.4 0.4. NG 7 7 / 0.5 0..47 NG /4.5 0.56 0. NG 0 4 / 4. /6 4. /.7 0.6.0 NG 7 7 / 0.5 0..47 AS /4.5 5/ 4.0 /.5 0.56 0. AS /4.5 /6 4. /.7 0.56 0. Delin Acetal (to ode) ow Fiction Acetal New Geneation Anti-Static Acetal (to ode) Stainless Steel Pins These ae heavy duty staight unning chains which, due to the length of the in and hinge aea, have load caying caacities on the same level as the singlehinge stainless steel 5 seies. As with the chains the has undeside einfocement but the design of the web means that the sockets do not equie gooving. Sockets fo these chains ae thus identical to the 5 Double-inge Seies. All chains featue the secial ovelaing to late system of acuic design which has the dual benefit of eliminating the gas between lates and ceating a self cleaing action to emove debis o dust. chains featue the thicke to late of /6" which makes them comatible in ide height to the, 7 and seies. Chain efeence Flight Thickness Dimension Ib/Ft g/m F 7 7 / 0.5.70.5 F 00 4.0 /6 4. /.5.00. F 04...7 NG 7 7 / 0.5.70.5 NG 00 4.0 /6 4. /.5.00. NG 04...7 Sockets age - Sockets age - Symbol Descition Inch Metic Symbol Descition Inch Metic P Chain Pitch /. eight Ove C / 7. inge / 4. Guide Cleaance /4.5 Pin Diamete /4 6.4 Min. ackflex adius /6.0 Tavel P Chain Pitch /. eight Ove C 5/6 7. inge 5 / 6.5 Guide Cleaance 5 /.7 Pin Diamete /4 6.4 Min. ackflex adius /6.0 Tavel

h PASTIC FAT TOP CAINS Staight un: Mini Seies Mini Seies Available s: Delin Acetal (lack) Delin Acetal (Gay) ow Fiction Acetal Stainless Steel Pins xclusive Mini-hinge designs fo use in aeas whee sace is esticted o fo the tansotation of small containes o bottles. Ideal fo the hamaceutical industy and fo the filling of miniatue siit bottles. oth Seies and chains have thei own unique hinge designs which ceate new ossibilities fo conveyo designes. Sockets standad seies but with naow width. Chain efeence D /4.0 /64.5 0.6. 0. 0.0 D.0 /.0 0.54.0 0. 0.5 F.0 /.0 0.54.0 0. 0.5 lack SPCIATY PASTIC FAT TOP CAINS Staight unning: P / ow ack Pessue P Seies Available s: ow Fiction Acetal New Geneation olles Stainless Steel Pins Mini Seies P P Flight Thickness Dimension Ib/Ft g/m P (ow ack Pessue) chains ae used in conveyo systems whee backline essue can occu. Unde these conditions the chain will continue to un undeneath the oduct but the to suface olles will otate, emove line essue and consequently event damage to oducts. The P chain will ovide ositive motion when backline essue is emoved. The olles ae attached to the to of the chain by a seies of stainless steel axles. The small cente distance of these axles offes a vey stable conveying suface which can also be used fo heavy duty goods. olles oduced in New Geneation mateial ovide educed oeating noise levels. P seies ae available in all standad widths. Chain efeence P 7 7 / 0.5 0..0 /.. 5.5 P 00 4.0 0..0 /..6 6.0 P 0. 0..0 /...0 P /4. 0..0 /.70..5 P 0 4 / 4.0 0..0 /.70..5 D olle olle Diamete D Dimension Ib/Ft g/m C C Sockets age - Symbol Descition Inch Metic Fo P seies P Chain Pitch.. tm. to To of Chain 0.75. eight Ove C 0..5 C Oveall Chain eight.4.0 Oveall 5.7 6.5 Guide Cleaance 5..7 Pin Diamete 0. 6.4 Min. ackflex adius 6.00 6.4 D h C Sockets age - Symbol Descition Inch Metic P Chain Pitch /. eight Ove C () /4 6.4 eight Ove C () 5/64 6.0 inge () /4.0 inge () /6.0 tm. to Chain tm. /. Pin Diamete /4 6.0 Min. ackflex adius /6.0 Tavel Symbol Descition Inch Metic Fo P seies P Chain Pitch.. tm. to To of Chain 0.75. eight Ove C 0..7 C Oveall Chain eight.4.0 Oveall 5.7 4. Guide Cleaance 5..5 Pin Diamete 0. 6.4 Min. ackflex adius 6.00 6.4 Tavel 4 5

SPCIATY PASTIC FAT TOP CAINS Side-Flexing: P ow ack Pessue P Seies Available s: ow Fiction Acetal New Geneation olles Stainless Steel Pins P (ow ack Pessue) chains ae used in conveyo systems whee backline essue can occu. Unde these conditions the chain will continue to un undeneath the oduct but the to suface olles will otate, emove line essue and consequently event damage to oducts. The P chain will ovide ositive motion when backline essue is emoved. The olles ae attached to the to of the chain by a seies of stainless steel axles. The small cente distance of these axles offes a vey stable conveying suface which can also be used fo heavy duty goods. olles oduced in New Geneation mateial ovide educed oeating noise levels. TA P Seies ae available in thee widths, the wide widths having a slightly diffeent olle configuation. PASTIC FAT TOP CAINS Side-Flexing: Seies /7 /7 Seies P TA Available s: /7 Chain efeence D D olle ack end adius Min. Side Flex adius h Ib/Ft G g/m G P 75 TA /4 5. 0.0.. P 0 TA 4 / 4. 5 0.0 4 6.6 4.00 P 7 TA 7 / 0.5 5 0.0. 4.7 k /4 C k 4 / k 7 / ow Fiction Acetal New Geneation Anti-Static Acetal Stainless Steel Pins These side-flexing chains have the same basic extenal dimensions as the stainless steel seies and can oeate in the same design of tack. As with the steel chain seies and 7 chains ae available in both evel and TA configuation. 7 chains featue the thicke to late of /6" which makes them comatible in ide height to the, and seies. All side-flexing chains ae now available in New Geneation mateial which offes imoved efomance unde dy conditions in tun conveyes. chains ae also available in /" width offeing advantages fo the tansotation of wide bottles and containes. Pin design is a secial D shae which ovides an anti-otation flat and does not equie a knuled ess fit which can ceate unnecessay stesses in the lastic unde heavy side loads in cuves. Chain efeence V Flight Thickness Dimension Min. adius h h Ib/Ft inc g/m inc F /4.5 7 0. 0. F /. 7 0.6 0. F 0 4 / 4. 4 6 0.70.04 5/ 4.0 5/ 5. F TA /4.5 7 0.6 0.4 F TA /. 7 0.67.0 F TA 0 4 / 4. 4 6 0.7.0 NG /4.5 7 0. 0. NG /. 7 0.6 0. NG 0 4 / 4. 4 6 0.70.04 NG TA /4.5 5/ 4.0 5/ 5. 7 0.6 0.4 NG TA /. 7 0.67.0 NG TA 0 4 / 4. 4 6 0.7.0 F 7 /4.5 7 0. 0. F 7 0 4 / 4. 4 6 0.70.04 F 7 TA /4.5 /6 4. / 5. 7 0.6 0.4 F 7TA 0 4 / 4. 4 6 0.7.0 NG 7 /4.5 7 0. 0. NG 7 0 4 / 4. 4 6 0.70.04 NG 7 TA /4.5 /6 4. / 5. 7 0.6 0.4 NG 7 TA 0 4 / 4. 4 6 0.7.0 AS /4.5 7 0. 0. AS TA /4.5 5/ 4.0 5/ 5. 7 0.6 0.4 Sockets age - C Tavel Sockets age - Symbol Descition Inch Metic P Chain Pitch /. eight Ove C /64 7.5 Pin Diamete / 7. Min. ackflex ad. /.0 Min. ackflex ad. 7 /6.0 Fo evel Chains Oveall /6 4. Guide Cleaance Staight /4.5 Guide Cleaance Cuve 5/ 4. Fo TA Chains Oveall /6 4. Tab / 6. Guide Cleaance Staight /6 46.0 Guide Cleaance Cuve /4.5 G ottom to Tab To 5/. TA Tavel G 6 7

PASTIC FAT TOP CAINS Side-Flexing: Seies Seies Available s: ow Fiction Acetal New Geneation Stainless Steel Pins These chains ae of heavy duty side-flexing design and due to the obust hinge design ovide high loading caabilities. chains ae available in both evel and Tab configuation, with TA seies being available u to width. chains featue the thicke to late of /6 which makes them comatible in ide height to the,, and 7 seies. All side-flexing chains ae now available in New Geneation mateial which offes imoved efomance unde dy conditions in tun conveyos. Pin design is a secial D-shae which ovides an anti-otation flat and does not equie a knuled ess fit which can ceate unnecessay stesses in the lastic unde heavy side loads in cuves. Chain efeence Flight Thickness Dimension Min. adius h h Ib/Ft inc g/m inc F 0 4 / 4..0.4 F 7 7 / 0.5 /6 4. /6 7.5 4 6.. F 00 4.0.0. F TA 0 4 / 4...6 F TA 7 7 / 0.5.6.4 F TA 00 4.0 /6 4. 7/. 4 6.0.7 F TA 04.0..7 NG 0 4 / 4..0.4 NG 7 7 / 0.5 /6 4. /6 7.5 4 6.. NG 00 4.0.0. NG TA 0 4 / 4...6 NG TA 7 7 / 0.5.6.4 NG TA 00 4.0 /6 4. 7/. 4 6.0.7 NG TA 04.0..7 PASTIC FAT TOP CAINS Side-Flexing: Seies M/7M/57M Plastic Magnetic System Chains Plastic Magnetic System Chains also un in the Dual Magnetic System Cuves. Plastic Magnetic System Chains do not have Tabs o evels, it is the stainless steel ins in the chain which ae attacted by the magnets embedded in the Dual Magnetic System Cuve. The chain is secuely etained in the cuve with minimal effect on chain loading. The in mateial is a Feitic C-Ni Stainless Steel which is magnetic but also gives vey good coosion and wea esistance. The F / NG 7 M and F / NG 57 chains have a thicke to late, 4. to match the, and seies chains. The 57 M seies chains, have a wide and deee hinge configuation than the and seies chains. This means that they equie diffeent, heavy duty cuves (efeence MD 4...) Secial cuves fo case conveyos ae also available. All Plastic Magnetic System Chains ae available in F Acetal and also in NG, New Geneation, high efomance mateial. 7 M M 57 M Flexon -ef F M- F M- 0 F 7 M- F 7 M- 0 F 57 M- 7 NG M- NG M- 0 NG 7 M- NG 7 M- 0 NG 57 M- 7 Seies 7 / 7,4,5 4,,5 4,, ack end adius adius min ** N N g/m,5 4,,5 4, Dimensions in 7 7 7 7 7 7 7 7 7,55 Guide cleaance Thickness 4,0 4,0 4, 4, 4,0 4,0 Allowable Chain Tension 00 00 00 00 00 00 00 00,05,5,05, 0,5 0 4, 0,5 4, 4,,05,5,, 0,5 0 4, 0,5 TA **Fo full details of ou lastic chain mateial secifications and also fo socket dimensions, lease efe to ou main Flexon System Plast Flat To Chain Catalogue. Seies 57 57 N V Sockets Page - Sockets age - Symbol Descition Inch Metic P Chain Pitch /. eight Ove C / 7.5 Pin Diamete /.7 Min. ackflex ad. /.0 Fo evel Chains Oveall / 6. Guide Clea. Staight 7/6 6. Guide Clea. Cuve / 57. Fo TA Chains Oveall /4 57. Guide Cleaance Staight /. Guide Cleaance Cuve / 57. G ottom to Tab To /6 7.5 Tab 76. Tavel 7,0,,5 Tavel

PASTIC SNAP TOP CAINS Staight un: Two-Piece 4 Seies Available s: To s: Delin Acetal ow Fiction Acetal New Geneation (to ode) ase olle Chains: Cabon Steel Stainless Steel 4 PASTIC SNAP TOP CAINS Staight un: Two-Piece 6 Seies Available s: To s: Delin Acetal ow Fiction Acetal New Geneation (to ode) ase olle Chains: Cabon Steel Stainless Steel 6 These chains have a two-iece design featuing lastic to lates which ae snaed on to a /" itch olle chain with secially extended ins to etain the lastic to. The system can often ove to be a wise investment as won o damaged to lates can be simly changed out on an individual basis without having to elace the comlete chain. The system ovides the benefits of a ositive chain dive which allows long cente distances and vey high seeds to be emloyed. To s ae available fom stock in F Acetal and on a made to ode basis in New Geneation o Anti-Static. The olle chain utilizes the geaing dimensions of ANSI - but due to the elongated in is not a standad chain. hen odeing only the base chain o connecting links lease note the coect efeence numbe as e the attached tables. 0 0 0 0 * 0 0 * D=No longe stock item. 0 0 0 0 0 0 These chains have a heavie duty two-iece design featuing lastic to lates which ae snaed on to a /4" itch olle chain with secially extended ins to etain the lastic to. The system can often ove to be a wise investment as won o damaged to lates can be simly changed out on an individual basis without having to elace the comlete chain. The system ovides the benefits of a ositive chain dive which allows long cente distances and vey high seeds to be emloyed. To lates ae available fom stock F Acetal and on a made to ode basis in New Geneation o Anti-Static. The olle chain utilizes the geaing dimensions of ANSI - but due to the elongated in is not a standad chain. hen odeing only the base chain o connecting links lease note the coect efeence numbe as e the attached tables. Chain efeence To Assembled Ib/Ft g/m To s eady Assembled on Cabon Steel ase Chain D 6 F 6 /4.5.4. D 6 0 F 6 0 4 / 4... D 6 0 F 6 0 6 5.4.70.5 D 6 7 F 6 7 7 / 0.5..6 To s eady Assembled on Stainless Steel ase Chain D 6 SS F 6 SS /4.5.4. D 6 SS 0 F 6 SS 0 4 / 4... D 6 SS 0 F 6 SS 0 6 5.4.70.5 D 6 SS 7 F 6 SS 7 7 / 0.5..6 oose To s efeence Individual oz/c g/c TOP D 6 TOP F 6 /4.5 0.7.5 TOP D 6 0 TOP F 6 0 4 / 4. 0. 6.4 TOP D 6 0 TOP F 6 0 6 5.4.7.6 TOP D 6 7 TOP F 6 7 7 / 0.5.4. ase olle Chain Connecting ink Cabon Stainless #6 #6 Con SS Con of ase Chain Cabon Stainless Ib/Ft g/m #6 #6 SS 0.4. of Conn. ink Ib/c g/c 0.06 0.0 Sockets age 4 Symbol Descition Inch Metic P Chain Pitch /.7 eight Ove C /64. Thickness /. inge /6.6 Guide Cleaance 5/6. tm. to Chain tm. /64.5 Pin Diamete 5/ 4.0 Min. ackflex adius 6 5.4 Tavel Sockets age 4 Symbol Descition Inch Metic P Chain Pitch /4. eight Ove C /6 4. Thickness 5/ 4.0 inge / 4. Guide Cleaance 7/6 6.5 tm. to Chain tm. /4. Pin Diamete 6.0 Min. ackflex adius 6 5.4 Tavel

PASTIC SNAP TOP CAINS Side-Flexing: Two-Piece 4 Seies Available s: To s: ow Fiction Acetal New Geneation Anti-Static ase olle Chains: Cabon Steel Stainless Steel 4 PASTIC SNAP TOP CAINS Side-Flexing: Two-Piece 7 Seies Available s: To s: Delin Acetal ow Fiction Acetal New Geneation ase olle Chains: Cabon Steel Stainless Steel 7 These chains have a two-iece design featuing lastic to lates which ae snaed on to a /" itch side-flexing olle chain with secially extended ins to etain the lastic to. The lastic tos incooate a TA tye design oviding ositive etention and anti-lift when unning in tight adius cuves as low as " (4). Guide tacks ae usually manufactued fom extuded aluminum. The 4 chain featues heavily in conveyes designed fo automotive ats handling o assembly lines fo electonic goods. Fo this eason To s ae also available in Anti-Static mateial. The olle chain utilizes the geaing dimensions of ANSI - but due to the elongated in is not a standad chain. hen odeing only the base chain o connecting links lease note the coect efeence numbe as e the attached tables. G These chains ae the heavie duty two-iece side-flexing system featuing a /4" itch side-flexing olle chain which has secially extended ins to etain the lastic to. The system can often ove to be a wise investment as won o damaged to lates can be simly changed out on an individual basis without having to elace the comlete chain. The system ovides the which allows long cente to be emloyed. To s ae available fom stock in both F Acetal o in New Geneation. The olle chain utilizes the geaing dimensions of ANSI - but due to the elongated in is not a standad chain. hen odeing only the base chain o connecting links lease note the coect efeence numbe as e the attached tables. G min ase olle Chain of ase Chain Cabon Stainless Ib/Ft g/m #6 #6 SS 0.06 0.0 Connecting ink of Conn. ink Tavel Cabon Stainless #6 #6 Con SS Con Ib/c g/c 0.0 0.0 4

h h 700 70 TA 70 PASTIC FAT TOP CAINS Multile-Flexing: To and Pushe Attachments Novoflex To Chains Novoflex Pushe Attachments Available s: hite Delin Acetal Gay Delin Acetal ow Fiction Acetal Stainless Steel Pins Tos Pushes Novoflex Tos Pushes 70 Seies To Chains ae available in two foms: TA / Seies: The extemely flat to lates have a cescent ofile which ovide a wide conveying aea with limited gas. Minimum tun adius can still be achieved by utilizing the smalle width seies. These chains featue a unique cental TA guide system which ovides stability and is ideal fo aluminum ofile conveyo systems. TA P/P Seies: These chains featue an ovelaing to late system which ovides maximum oeato secuity. As with the seies the chains featue a unique cental TA guide system fo stability when installed in Aluminum ofile guides. Novoflex 700 Seies/ Pushe Attachments M/M/M M seies attachments ae available in thee sizes oviding a wide ange of solutions fo oducts which need to be ushed o caied. The attachments ae assembled accoding to custome equiement (e.g. M evey 4th itch). The M attachment is a solid unit manufactued fom a chemical esistant Polyamide offeing high load caacity. Is aticulaly used in cate washing systems which demand high temeatues, often combined with New Geneation link late mateial which can oeate u to 0 F ( C). Novoflex 70 TA / Novoflex 70 TA P /P M /M /M h h 700 Pushe Attachment Seies efeence Pushe efeence of asic Chain Pushe D (hite) F (own) Geen Geen Tavel h 70 M 70 TA M M Acetal 4 /.00 /..75.0 70 M 70 TA M M Acetal / 4.00 7/..05 0.0 70 M 70 TA M NG 70 M 70TA M M Polyamide /6 0.00 /64.00.75.0 G G Tye oz/c g/c d Symbol Descition Inch Metic P Chain Pitch.6.0 eight Ove C 7/.5 h Tab eight /6.0 /64 55.0 Tab / 67.5 h eight 5/6 4.0 G Chain tm. to Tab To /4 5.5 Pin Diamete /6.0 Min. ackflex adius 70 7/ 0.0 Symbol Descition Inch Metic P Chain Pitch.6.0 eight Ove C 7/.5 h Tab eight /6.0 /64 55.0 Tab / 67.5 h eight 5/6 4.0 G Chain tm. to Tab To /64 5.5 Pin Diamete /6.0 Min. ackflex adius 70 7/ 0.0 eight M d M Diamete d d M 4

PASTIC CONVYO CAINS Side-Flexing: Case Conveyo Chain CAS CAIN MAA ION CC 0/0 Conveyo Chains Available s: hite Delin Acetal New Geneation Stainless Steel Pins These duable conveyo chains ae designed to tansot cates, cases, boxes, allets o taditionally bee kegs, hence the oduct gou title of Novokeg. Two itch sizes of /" o /4" ae available in lain vesions o with hold down side lugs (TAS) which taditionally use the lette D to denote the use of a TA. Paticulaly suited to wet aeas in beweies, daiies and bottling lants as they will not ust, equie little o no lubication, ae quiet and can be steam cleaned. NG mateial is aticulaly ecoended fo high esistance to both wea and temeatue and has excellent chemical esistance against cleaning agents such as hydogen eoxide. CC Chains ae sulied as standad with secial design of Sna-in in fo easy assembly and disassembly. Fo added secuity unde vey hot conditions (steam) sun iveted ins can also be sulied. Chain efeence CC 0 hite / 6.5 0....5 0.. CC 0 D (TA) / 6.5 0....5.00.4 CC 0 /4.5 0.7.5.5.5 6 5..7 CC 0 D (TA) /4.5 0.7.5.5.5 6 5..4 NG 0 / 6.5 0....5 0.. NG 0 D (TA) / 6.5 0....5.00.4 CC 0 CC 0 D (TA) P Pitch CC 0 Seies available in NG mateial to secial ode. h h inc Ib/Ft g/m inc O Pin Diamete CC 0 ink eight CC 0 D (TA) P Min. adius Chain No. CM0 CM 0D CM CM D Cast Ion Standad Tye Pitch P in...5 64.5 64.. in.. 6 4 6 4 6 5 6 5 Diamete of Pin D in.. 7 6 7 6 6 4 6 4 Nylacast Deth of Sideba in.. D Tye Oveall width in.. - - 54 - - 6 6 eight of D ug T in.. - - 6 4 - - 5 6 4 Symbol Descition Inch Metic Dimensions fo 0 Seies Chains eight Ove C /6 4. ove Pin / 4.0 ove TA / 54.0 eight of TA 4/64 7.0 Dimensions fo 0 Seies Chains eight Ove C /4. ove Pin /.0 ove TA 7/64 65.5 eight of TA 4/64.5 Dimensions fo 0 Seies Sockets Tooth 0.4.7.00.0 A ub Diamete.70 5.0 db Stock oe 0.75.0 Dimensions fo 0 Seies Sockets Tooth 0.6 7.5. 6.5 A ub Diamete.0 0.0 db Stock oe 0.75.0 P Tavel P Flexon ef Actual ffective Pitch Cicle P Sockets fo Case Conveyo chains Seies CC 0, Pitch: 6,5 (.5 ) -CC0-0 -CC0- -CC0- -CC0-4 7-CC0-0 7-CC0-7-CC0-7-CC0-4 Cast Ion Nylacast 4 4 4 4 66,00 5,, 5, 66,00 5,, 5, 7,, 5,0 6, 7,, 5,0 6, Sockets fo Case Conveyo chains Seies CC 0, Pitch:,5 (. ) -CC0-0 -CC0-0 -CC0-7-CC0-0 7-CC0-0 7-CC0- Cast Ion Nylacast,66 4,0 67,,66 4,0 67, Oute do.56 66,70,6.56 66,70,6 ub dia 5 5 5 5 5 5 5 5 0 0 0 0 0 0 Pilot oe Oveall Tooth,,,,,,,, 6,5 6,5 6,5 6,5 6,5 6,5,74,74,74,74,74,74,74,74 7,5 7,5 7,5 7,5 7,5 7,5 g/each, 5,70,,00,,,70,,00,65,0. 4, 6,00 6 7

SPIT PASTIC SPOCTS (SOID MATIA) SPIT PASTIC IDS (SOID MATIA) Available s: PA6G Nylon Polyamide Stainless Steel bolts and thead insets Novoat Available s: PA6G Nylon Polyamide Stainless Steel bolts and thead insets Novoat These socket wheels ae machined fom solid ods and then slit acoss the axle to ovide quick and easy installation and emoval onto the conveyo shaft. These idle wheels ae machined fom solid ods and then slit acoss the axle to ovide quick and easy installation and emoval onto the conveyo shaft. They ovide many use advantages All sockets available with stock boe.75" (). Finished boed and keyed sockets to ode. ecoended oe-shaft Toleance = P Fo futhe details consult Diamond. ygiene no dit tas as with molded sockets. Can be boed to " without weakening body. igh stength. xcellent wea life. ighte than cast ion. ill not ust. asy to machine. ow maintenance. They ovide many use advantages ygiene no dit tas as with molded idle units. Can be boed to " without weakening body. igh stength. xcellent wea life. ighte than cast ion. ill not ust. asy to machine. ow maintenance. 5 5 PD PD PD w w efeence fo Staight un Sockets Socket Tye & Numbe of Teeth Total Pitch Cicle Dia. PD Outside Dia. Max. oe Act. ff. Ib/ea g/ea Fo Chain Seies /5/ M G 6-5- Piece.5.65 4. 5.0. 5. 0.00. 0. G 6-5- Slit.5.65 4. 5.56 4. 5. 4.00.54 0.70 Polyamide G 6-5-.5.65 4. 6.0 5. 6.06 54.00.76 0. Fo Chain Seies /5 (D)//P G 6-5- Piece.5. 7. 5.0. 5. 0.00.0 0.5 G 6-5- Slit.5. 7. 5.56 4. 5. 4.00..05 Polyamide G 6-5-.5. 7. 6.0 5. 6.06 54.00.5.5 Fo Chain Seies // -/P G 6-- Piece.5.65 4. 5.0. 5. 0.00. 0.55 G 6-- Slit.5.65 4. 5.56 4. 5. 4.00.4 0.65 G 6-- Polyamide.5.65 4. 6.0 5. 6.06 54.00.76 0. All idles available with stock boe.75" (). Finished boed and idles to ode. ecoended oe-shaft Toleance= +0.0"/+0.06" +0./+0.4 5 5 D D efeence Idle quiv. Oveall eight Outside Dia. Max. oe fo Staight Tye & No. unning Idle Teeth Ib/ea g/ea Fo Chain Seies /5/55/ M///P UG 6-5- Piece.5 6.7 0.47.00 5.07 0.00. 0.7 UG 6-5- Slit.5 6.7 0.47.00 5.5 4.00.7 0.5 UG 6-5- Polymide.5 6.7 0.47.00 6.00 54.00.0 0.5 Fo Chain Seies /5 UG 6-5- Piece. 0. 0.47.00 5.07 0.00..05 UG 6-5- Slit. 0. 0.47.00 5.5 4.00.64. UG 6-5- Polymide. 0. 0.47.00 6.00 54.00.7.5 Fo Chain Seies /P UG 6-- Piece 6. 5.4 0.47.00 5.07 0.00.6.65 UG 6-- Slit 6. 5.4 0.47.00 5.5 4.00 4.07.5 UG 6-- Polymide 6. 5.4 0.47.00 6.00 54.00 4.5.05 PD PD T w w T.75 efeence fo Side-Flexing Sockets Socket Tye & Numbe of Teeth Tooth Oveall Pitch Cicle Dia. PD Act. ff. Ib/ea g/ea Fo Chain Seies // MG Outside Dia. Max. oe G 46-- Piece.5..0.65 4.5 5.0. 5. 0.00. 0.55 G 46-- Slit.5..0.65 4.5 5.56 4. 5. 4.00.4 0.65 G 46-- Polyamide.5..0.65 4.5 6.0 5. 6.06 54.00.76 0. Fo Chain Seies G 6-- 0.6 5..6 4. 4.4. 4.. 0.74 0.4 G 6-- Piece 0.6 5..6 4. 4.. 4.75.00 0. 0.7 G 6-- Slit 0.6 5..6 4. 5.7 5. 5.0 6.00 0. 0. G 6-- Polyamide 0.6 5..6 4. 5.74 47. 5.70 47.00.4 0.5 G 6--5 5 5 0.6 5..6 4. 7.5. 7.7 4.0. 0. Fo Chain Seies /P G 6-- 0.5.00.6 4. 4.. 4.6. 0. 0.7 G 6-- Piece Slit 0.5.00.6 4. 4.. 4.7 5.00 0. 0. G 6-- Polyamide 0.5.00.6 4. 5.7 5. 5.4 7.00.05 0.4 G 6-- 0.5.00.6 4. 5.74 47. 5. 4.00. 0.55 TA&V TA & V do do efeence fo Side-Flexing Idle Idle Tye & quiv. No. Teeth Oveall eight Ib/ea g/ea Fo Chain Seies / TA and evel Outside Dia. Max. oe UG 46-- Piece.65 4.5. 0.47.00 5.07 0.00. 0.55 UG 46-- Slit.65 4.5. 0.47.00 5.5 4.00.4 0.65 UG 46-- Polymide.65 4.5. 0.47.00 6.00 54.00.65 0.75 Fo Chain Seies TA and evel UG 6-- 0.5.00.6 4..5 75 4.. 0. 0.6 UG 6-- Piece 0.5.00.6 4..5 75 4.75.00 0. 0. UG 6-- Slit 0.5.00.6 4..5 75 5.0 6.00.05 0.47 UG 6-- Polymide 0.5.00.6 4..5 75 5.70 47.00. 0.54 UG 6--5 5 0.5.00.6 4..5 75 7.7 4.0. 0.6 Fo Chain Seies TA and evel/p UG 6-- 0.5.00.6 4..5 75 4.6. 0. 0.46 UG 6-- Piece Slit 0.5.00.6 4..5 75 4.7 5.00 0. 0.4 UG 6-- Polymide 0.5.00.6 4..5 75 5.4 7.00.05 0. UG 6-- 0.5.00.6 4..5 75 5. 4.00. 0.5

STANDAD SPOCTS IN ST/CAST ION/PASTIC STANDAD SPOCTS IN ST/CAST ION/PASTIC Seies /5/M/ 0//5/// MF and 6-5 -5 6-5 - 6-4- 6- - Sockets fo Seies /5/ M Pitch, = / Sockets fo Seies / Pitch, = / Steel and Polyamide Cast Ion Flexon ef No. of Teeth Actual ffective Pitch Cicle Oute do oot Pilot oe Max oe kg/each Steel and Polyamide Cast Ion Flexon ef No. of Teeth Actual ffective Pitch Cicle Oute do oot Pilot oe Max oe kg/each 4,5 4,5 4-5- 4-5- 4-5- 4-5- Steel,,,, 7,0, 4, 5, 7 0 4 54 4,7 6,07,07,07 67 75, 4, 5, 6,06 4 6,5 4 6,5 4-- 4-- 4-- 4-- Steel,,,, 7,0, 4, 5, 7 0 4 54 4,7 6,07,07,07 67 75,,7,4, Ø do Ø Ø Ø Ø Ø do -5- -5- -5- -5-6-5-7 6-5- 6-5- 6-5- 6-5- Cast Ion Polyamid 7,,,,,,,,, 7,0, 4, 5, 5, 7,0, 4, 5, 7 0 4 54 5 7 0 4 54 4,7 6,07,07,07,7 4,7 6,07,07,07 55 67 75,0,,, 0,0 0, 0, 0, 0,70 d0 d0 -- -- -- -- 6--7 6-- 6-- 6-- 6-- Cast Ion Polyamid 7,,,,,,,,, 7,0, 4, 5, 5, 7,0, 4, 5, 7 0 4 54 5 7 0 4 54 4,7 6,07,07,07,7 4,7 6,07,07,07 55 67 75,,,00, 0,0 0, 0, 0, 0,75 4,5 4,5 Sockets fo Seies 0//5/ Pitch, = / 4, 4, Sockets fo Seies Pitch, = / do 7,4 7,4 4 do 4-5- 4-5- 4-5- 4-5- -5- -5- -5- -5-6-5-7 6-5- 6-5- 6-5- 6-5- Steel Cast Ion Polyamid 7,,,,,,,,,,,,, 7,0, 4, 5, 7,0, 4, 5, 5, 7,0, 4, 5, 7 0 4 54 7 0 4 54 5 7 0 4 54 4,7 6,07,07,07 4,7 6,07,07,07,7 4,7 6,07,07,07 67 75 55 67 75 6,6,0,6,4,0,00,,0 0, 0,70 0, 0,0,00 5, d0 5, d0 4-- 4-- 4-- 4-- 4--5 -- -- -- -- --5 6-- 6-- 6-- 6-- 6--5 Steel Cast Ion Polyamid 5 5 5 5 5 5,, 5, 47,,,, 5, 47,,,, 5, 47,, 6 47 4 6 47 4 6 47 4 5, 7,70,, 67, 5, 7,70,, 67, 5, 7,70,, 67,,,56,76,,,0,,,,0 0,4 0, 0, 0,5 0, Sockets fo Seies // MF Pitch, = / 4,5 4,5 Sockets fo Seies Pitch, = / 4,5 4,5 -- -- -- -- Steel,,,, 7,0, 4, 5, 7 0 4 54 4,7 6,07,07,07 67 75,4,4 4,6 5, 4-- 4-- 4-- 4-- Steel,, 5, 47, 5 7 4,5,7 5,67 7,66,4,67,5,6 d0 do -- -- -- -- 46--7 46-- 46-- 46-- 46-- Cast Ion Polyamid 7,,,,,,,,, 7,0, 4, 5, 5, 7,0, 4,00 5, 7 0 4 54 5 7 0 4 54 4,7 6,07,07,07,7 4, 6,00,00,00 55 67 75,70,0,,0 0,5 0, 0, 0, 0,55 d0 d -- -- -- -- 6-- 6-- 6-- 6-- Cast Ion Polyamid,, 5, 47,,, 5, 47, 5 7 4 5 7 4,5,7 5,67 7,66,5,7 5,67 7,66,70,0,00, 0, 0,46 0,4 0, 0

COMPACT CUV AND STAIGT GUIDING SCTIONS COMPACT CUV AND STAIGT GUIDING SCTIONS Comact cuves ovide a fast and touble fee solution to conveyo building. Poduced fom Polyethylene UM P 00 to consistently guaantee a efect adius and cleaance between the chain. The mateial does not absob moistue thus eventing exansion and ossibility of taing chain. UM P 00 is also highly wea esistant and noise absobing. Comact Cuve Sections Flexon ef: S 00... S 06... S 006... T 00... T 06... T 006... S 6... S 06... S 6... TS 6... TS 06... TS 6... TS 46... TS 0... TS 6... TS 46... TS 06... TS 6... TS 46... Chain Tye // // / //TA //TA /TA TA TA TA TA 7 7 7 7 7 7 A 0 7 0 7 0 7 00 0 7 00 0 0 7 00 0 5 0 0 5 0 5 0 65 5 0 65 0 5 0 65 Guide Tack (+-0,5) (Dimensions in ) s 4 4,4 - - 6 70,5-5 - - 6 5 0 6 6-4,6 70 6 - adius 0 6 6 0 6 6 6 6 6 6 6 6 6 0 0 6 6 6 6 Cente Distance 0 5 0 5 5 5 0 5 Staight Sections Flexon ef: SS 0-00... SS 0-00... SS 00-00... ST 0-00... ST 0-00... ST 00-00... SS -00... SS 0-00... SS -00... ST -00... ST 0-00... ST -00... ST 4-00... ST -00... ST -00... ST 4-00... ST 0-00... ST -00... ST 4-00... Single Stand Double Stand V Design V Design TA Design TA Design Ode xamle (e Set) Double stand bevel design fo --0 =6, =70 incooating two stands within two cuve sections-to and etun un-lus cove late fo etaining etun un Ode No. S 0 6... (6/70) / only fo multistand ode No. of stands equied Tile Stand V Design TA Design adius Code no. fo chain tye (see below table) Guide Sections ae also available in staight unning fom. Standad length= metes. evel design Single & multi-tack staight sections fo sideflexing table to chains available in two mete lengths as standad. Dimensions 5 = Cleaance=To Thickness of Chain +.5 Mounting =MX5 Nut Inset =M Countesunk ole Infomation:

SPOCTS FO TOP PAT CAINS/GUID INGS A STIPS FO FAT TOP CAINS 4-4 6-7 7. Sockets fo Sna-On Seies 4/4 (Pitch:.7 / / ) Flexon ef. Flexon ef..7 Flexon ef No. of Teeth 0-0-05 0-0-06 0-0-07 0-0-0 0-0-0 0-0-0 0-0-0 0-0-0 0-0-0 0-0-04 0-0-0 5 6 7 4 Flexon ef No. of Teeth 0-0-05 0-0-07 0-0-0 0-0-0 0-0-0 0-0-0 0-0-07 0-0-0 0-0-00 0-0-0 0-0-0 5 7 7 0 Pitch Cicle Diamete do 6,0 65, 6, 7,4 77,6, 5,,4,7 7,0, Pitch Cicle Diamete do,6,7 5,7 7,, 5,0 64, 76,, 0,7 4, Oute Diamete dk 66 70 74 7 6 0 4 6 Oute Diamete dk 0 5 4 6 74 6 Dimensions in ub Diamete dn,0,0 5,0 56,0,0 64,0 6,0 70,0 70,0 70,0 70,0 Sockets fo Sna-On Seies 6/7 (Pitch:.05 / /4 ) Pilot oe d 4 4 4 4 4 Dimensions in ub Diamete dn 70 0 0 0 5 5 5 0 0 Pilot oe d 4 6 6 Max oe d 5 4 Max oe d 56 56 56 5 5 5 6 6 Oveall ength Oveall ength 5 5 5 Flexon offe a comehensive ange of UM P 00 ofiles to suit all bottling and canning alications. The unique oeties of this mateial offes the following advantages: No moistue absotion, low coefficient of fiction, high abasion esistance, low wea, excellent sliding oeties and substantial noise eduction. FD 6 Flat Pofile F4 F5 F7 /0 F7 /N F47 5.6 4 / /6 7 7 F55 F56 F57 F5 F5 5 4 6 4 4 6 5.5 5.5 C steel 5 GUID INGS, ST AND STAINSS ST Also available uon equest in stainless steel S F6 5.5 Fo Socket Tooth Size 5-6T 7-T -T -T -4T Outside Dia., Ins. ().6 (.) 4. (4.4) 4.5 (6.) 5.0 (.) 5.56 (4.) Thickness Ins. () /6 (.6) + /6 (.6) / (.) / (.) / (.) Pe Set bs (g). (.).6 (.).7 (.7). (.).46 (.) Fo Socket Tooth Size -6T 7-T -0T -T 4-4T Outside Dia., Ins. () 6.04 (5.4) 6.5 (65.) 7.0 (7.) 7. (0.5). (.) Thickness Ins. () / (.) / (.) / (.) / (.) / (.) Pe Set bs (g).47 (.).5 (.4).56 (.).67 (.0). (.4) Flexon ef. FP x FP 0x FP x FP x FP x5 FP 0x5 FP x5 FP x5 (F7) Dimensions in 0 0 S 5 5 5 5 F6 FG.5 Side Guide ails with C-Pofile 4 4 6.5.5.5 F F Side Guide ail (e.g. fo Glass Industy) 0.5.5 7 6.5.5.5 6.75 4 5

COOSION SISTANC TA Fo Chains and eastis PMISSI CAIN OING OAD DATA Chemical o Coon Tem of Conveyed Medium Cabon Steel S 5 SS SS Stainless Steel SS 5/SSC 5 SSA 5 SS 5/SSC 5 SSA SS O/SSC N ubbe Acetal D/F/AS/F Plastic NG A (Acid esistant) Acetic Sewage Acid ate (u to with 5%) Sulhu - - o+ + o - o o + + Acetone Aonia - + + + + - + - + + Aonia Ale ine - + + + + + + o + + Ale Acetone ine - + + + + + + + + ee o + + + + + + + + enzol (enzene) + + + + o + + + + ine - - o o - - + + - utyic Acid - + + + - - + + - Cabolic Acid - - o o - - - + o Cabon Tetachloide o o o o o + o - Cheese - + + + - - + + - Chocolate - + + + + + + + + Chlohydic Acid - o o o - - - + - Citic Acid - o + + - + + + + Coon Salt - - o o - + + + + Fomaldehyde + + + + - + + + + Fuit uices - + + + - + + + + ydochloic Acid (u to %) - - - - - - o + + ydogen Peoxide - o + + o - + + o actic Acid - - o o - + o + + emon uice - o + + - + + + + emonade, Mineal ate - + + + + + + + + iqueu - + + + - + - + + Milk - + + + - + + + + Mustad - + + + + - o + - Nitic Acid - o + + o - - + + Oil + + + + - + + + + Paaffin + + + + - + + + + Petol + + + + - + + - o Petoleum, Cude Oil - + + + - + + - - Phoshoic Acid (u to %) - - o o - - o + + Sewage ate with Sulhu - o + + - - o + o Soft dinks + + + + + + + + + Siits + + + + + + + + + Suga Solution - o + + - + + + + Sulhuic Acid - - o o - - - + + Tataic Acid - o + + - o + + o Vegetable uices o + + + - + + + + Vinega - o o o - - + + + ate - + + + - + + + + ate and Soa o + + + + + + + o ine o + + + o + + + + +=xcellent esistance = Satisfactoy esistance =Unsatisfactoy esistance eastis P 00 Chain Tye Steel & Stainless Steel Chains Pemissible oking oad S 5 00 00 SS 0 SSC 5 0 00 SS 5 5 00 SSA 5 0 0 S 0 7 7700 SS 7 0 SSC 5 70 SS 5 00 SSC 55 0 00 S O 0 SSC 0 00 SSA 5 0 SS O 5 0 SS M 0 SS M 5 0 SS MF 5 0 4 670 000 4 SS 0 6 7000 6 SS 00 00 4 0 00 4 SS 70 7 00 7 SS 75 74 00 74 SS 7 0 lb Pemissible oking oad N Chain Tye Plastic Chains Pemissible oking oad / 0 00 / 0 700 / 700 670 000 0 700 0 700 /7 45 0 /7 0 700 /7 0 700 00 00 0 0 0 0 700/70 T/70 00 00 700/70 T/70 0 0 700/70 T/70 7 0 CC 0 00 CC 0 0 50 CC 0 0 00 S (Mini) 0 lb Pemissible oking oad N 6 7

NVIONMNTA ISSUS & FICTIONA VAUS Coefficient of Fiction µ The values fo coefficient of fiction, between chain and weasti and between chain and oduct being conveyed, ae emiical data gained unde laboatoy conditions. The actual coefficient of fiction fo any secific installation can vay significantly and is deendent on factos such as lubication, suface condition of the chain, weasti and oduct, on the cleanliness of the suface, on the consistency of suface finish, etc. These figues should theefoe be used as a guide and alied with exeience and knowledge of the actual alication and installation. Choice of eastis The two most coonly used weastis ae stainless steel and UM P. The chat on the evious age indicates the coefficient of fiction fo both. Flat To chains will oeate effectively on these and on many othe weasti mateials. The uose of the weasti is to event wea to the conveyo fame, to educe fiction and to educe wea on the chain. The mateial of the chain and of the weasti must theefoe be comatible. If stainless steel is used as a weasti unde lastic chain, it should have sufficient hadness and coosion esistance to event oxides being dawn fom the steel which can cause acceleated wea to the lastic chain. ubication Coect lubication is imotant to olong the life of any conveyo chain and weasti. ubication will also ovide a smoothe unning conveyo with less maintenance. Develoments within the conveyo industy itself in ecent yeas has bought the intoduction of synthetic comounds to elace the taditional soa/wate solutions. Synthetic lubicants ae usually envionmentally fiendly as they tend to dilute moe efficiently in sewage teatment. Moden conveyo chain technology data must now addess the issue of synthetic lubicants. Today s comlete list of Flat To chain lubicants can be geneally listed as follows: a) ight Oil b) Soa/ate Mix c) ate Only d) ate with cleaning agent e) Synthetic Synthetic lubicants sometimes include a built-in cleaning agent which can also lead to chemical attack, aticulaly with standad lastics. Fo futhe infomation you should consult the conveyo manufactue concened. Cleaning If the conveyo system is cleaned on a egula basis then wea will be consideably educed. Steam o soa-based cleaning agents ae most coonly used. Standad Plastic chains must only be cleaned with liquids ossessing a value of between 4.5 and.0. It should be noted that with both steel and lastic chains it is often the cleaning agent which causes the most chemical attack. unning Dy If lubication is not desiable, o it has been decided fo cost easons to educe o emove lubication, Flexon offes cetain lastic mateials to coe with these conditions. F mateial will enable dy unning on a limited basis but New Geneation mateial will ovide imoved efomance unde dy conditions. oweve, it should be noted that even if the conveyo uns dy, cleaning should still occu on a egula basis. ate with a disinfectant agent geatly educes the damaging build u of oxides and dit. Dit and oxidation ae the majo causes of fictional inceases, theefoe the key to unning a conveyo at its most efficient and with less down time is to kee the fiction coefficient factos as low as ossible. oweve, the seach fo the lowest fiction coefficient is often a tade off fo a mateials esistance to wea. A satisfactoy medium is always advised. Flat To Chain mateials ae caable of efoming unde extemely aduous conditions. Obviously ime consideation in chain alication is the ambient temeatue faced by the conveyo and its consequent ability to efom within the mateials aametes. Flat To mateials offe wide temeatue anges as given in this table and these mateials will cove most conveyo alications.

T: + (0) 557 0 F: = (0) 557 6 : ti@flattosystems.com www.flattosystems.com Agent: