A New Wiper Insert Line Now Available for Gold Rhino
|
|
- Lily Nichols
- 6 years ago
- Views:
Transcription
1 Shapes: CNMG DNMG TNMG WNMX Cone Radius: (0.4mm) (0.8mm) (1.2mm) Gades: Coated Cabide TT7005 TT7015 TT8105 TT8115 TT8125 TT5100 CT3000 (uncoated) PV3010 (PVD-TiN coated) A New Wipe Inset Line Now Available fo Gold Rhino is pleased to announce the intoduction of wipe insets to the Gold Rhino poduct line. The smalle-sized Gold Rhino insets ae a pefect complement to the wipe geomety, paticulaly when using the insets in finishing applications whee lighte cutting depths ae geneally applied. Available in CNMG, DNMG, TNMG and WNMX shapes, and with thee adius and eight gade options, these Gold Rhino wipe insets cove a wide ange of machining applications whee highe feed ates and/o impoved suface finish is desied. PAGE 1 OF 10
2 WIPER INSERT FEATURES Compaed to geneal insets, the new wipe insets achieve equivalent oughness even in double feed ate conditions. At equivalent feed ates, the new Gold Rhino wipe insets achieve 2-3 times bette suface oughness. Pedictable suface oughness in a wide feed ange. Highe feed inceases poductivity. Conventional inset Wipe inset fn Rmax Rmax (Wipe) Rmax = fn 2 x 1000 / 8 Rmax (Wipe) = Rmax / 2 PAGE 2 OF 10
3 WIPER INSERT EDGE GEOMETRY Chip beake Edge geomety 10 WA 6 WIPER INSERT RANGE Depth of cut (inch) WA Inset : CNMG 332 (090408) WA Cutting speed (V) : 650 sfm Mateial : 0.45% Cabon Steel (HB200~230) Feed ate (ip) PAGE 3 OF 10
4 NOTE: PRIOR TO USING WIPER INSERTS In ode to obtain the full effect of the inset s wipe capability, please combine both the holde and the inset as suggested below: Tool holde Appoach angle at 95 Appoach angle at 75 Appoach angle at 93 Appoach angle at 91 Inset CNMG-WA (80 cone), WNMX-WA CNMG-WA (100 cone) DNMG-WA TNMG-WA Without using the above holde inset combinations, it is not possible to achieve the wipe effect duing machining. Effective application - Staight cutting in paallel o pependicula to the wok-piece s cente line Ineffective application - Tapeed o cuved face cutting * does not ecommend using wipe insets fo intenal machining in long ovehang conditions due to excessive adial tool pessue that can ceate vibation. PAGE 4 OF 10
5 NOTE: PRIOR TO USING WIPER INSERTS To set the wipe inset cutting edge height on the non wipe inset equivalent, the following adjustments should be applied. Index position diffeence Inset type Cone R Designation X (inch) Z (inch).016 CNMG331(090404) WA WNMX331(060404) WA CNMG & WNMX (80 ).031 CNMG332(090408) WA WNMX332(060408) WA CNMG333(090412) WA WNMX333(060412) WA CNMG331(090404) WA CNMG (100 ).031 CNMG332(090408) WA CNMG333(090412) WA DNMG (130504) WA DNMG (55 ).031 DNMG (130508) WA DNMG (130512) WA TNMG2.531(130404) WA TNMG (60 ).031 TNMG2.532(130408) WA TNMG2.533(130412) WA Z Cone R of wipe edge X Cone R of conventional edge PAGE 5 OF 10
6 CASE STUDY 1 Wokpiece mateial Automotive stuctual steel (SAPH 440-P) Opeation Intenal tuning Inset CNMG432(120408) cemet PVD coated CNMG331(090404) WA TT8115 Cutting speed V (sfm) 1180 Feed ate F (ip).005 Depth of cut ap (inch).020 Coolant Yes (pcs/cone) Suface finish (Ra) μ in (pcs/cone) inceased by 97% CASE STUDY 2 Wokpiece mateial SAE 8620 (SNCM220(H)) Opeation Extenal tuning Inset DNMG432(150408) cabide CVD coated DNMG (130508) WA TT8115 Cutting speed V (sfm) 700 Feed ate F (ip).020 Depth of cut ap (inch).008 Coolant Yes (pcs/cone) Suface finish (Ra) μ in (pcs/cone) inceased by 120% PAGE 6 OF 10
7 CASE STUDY 3 Wokpiece mateial SAE 8620 (SNCM220(H)) Opeation Extenal tuning Inset TNMG332(160408) cabide CVD coated TNMG2.532(130408) WA TT8115 Cutting speed V (sfm) 980 Feed ate F (ip).016 Depth of cut ap (inch).020 Coolant Yes (pcs/cone) Suface finish (Ra) 75 μ in (pcs/cone) inceased by 25% CASE STUDY 4 Suface oughness compaison among seveal chip beakes Wokpiece mateial S45C (AISI 1045) Opeation Extenal continuous tuning Inset CNMG332(090408) PC TT8115 / CNMG332(090408) FM TT8115 / CNMG332(090408) FG TT8115 / CNMG332(090408) WA TT8115 Cutting speed V (sfm) 650 Feed ate F (ip).006,.012 Depth of cut ap (inch).060 Coolant Wet Ra (μ in) ".012" 24 PC FM FG WA PAGE 7 OF 10
8 CNMG Negative 80º hombic insets d 80 Size Dimension (inch) d t t Inset Designation Feed (ip) ap (inch) PV3010 CT3000 TT7005 TT7015 CVD coated TT8105 TT8115 TT8125 TT5100 CNMG 331(090404) WA (090408) WA (090412) WA : Standad items DNMG Negative 55º hombic insets d 55 Size Dimension (inch) d t t Inset Designation Feed (ip) ap (inch) PV3010 CT3000 TT7005 TT7015 CVD coated TT8105 TT8115 TT8125 TT5100 DNMG (130504) WA (130508) WA (130512) WA : Standad items PAGE 8 OF 10
9 TNMG Negative tiangula insets 60 Size Dimension (inch) d t t d Inset Designation Feed (ip) ap (inch) PV3010 CT3000 TT7005 TT7015 CVD coated TT8105 TT8115 TT8125 TT5100 TNMG 2.531(130404) WA (130408) WA (130412) WA : Standad items WNMX Negative 80º tigon insets 80 Size Dimension (inch) d t t d Inset Designation Feed (ip) ap (inch) PV3010 CT3000 TT7005 TT7015 CVD coated TT8105 TT8115 TT8125 TT5100 WNMX 331(060404) WA (060408) WA (060412) WA : Standad items PAGE 9 OF 10
10 RECOMMENDED CUTTING SPEEDS (SFM) ISO Mateial Condition Tensile stength (N/mm 2 ) Hadness HB Coated PV3010 CT3000 TT7005 TT7015 TT8105 TT8115 TT8125 TT5100 P M K N S H Non-alloy steel, cast steel, fee cutting steel Low alloy steel and cast steel (less than 5% of alloying elements) High alloy steel, cast steel and tool steel Stainless steel and cast steel Gay cast ion (GG) Cast ion nodula (GGG) Malleable cast ion Aluminum - wought alloy Aluminumcast, alloyed Coppe alloys Non-metallic High temp. alloys Titanium, Ti alloys Hadened steel < 0.25%C Annealed >= 0.25%C Annealed < 0.55%C Quenched and tempeed >= 0.55%C Annealed Quenched and tempeed Annealed Quenched and tempeed Annealed Quenched and tempeed Feitic / matensitic Matensitic Austenitic Feitic Pealitic Feitic Pealitic Feitic Pealitic Not cueable 60 Cued 100 <=12% Si Not cueable 75 Cued 90 >12% Si High temp. 130 >1% Pb Fee cutting 110 Bass 90 Electolitic coppe 100 Duoplastics, fibe plastics Had ubbe Fe based Annealed 200 Cued 280 Ni o Co based Annealed 250 Cued 350 Cast 320 Rm 400 Alpha+beta alloys cued Rm 1050 Hadened 55HRC Hadened 60HRC Chilled cast ion Cast 400 Cast ion nodula Hadened 55HRC Steel Stainless steel Cast ion Nonfeous High temp. alloys Hadened steel PAGE 10 OF 10
A New Wiper Insert Line, Now Available for RHINORUSH
1/8 A New Wipe Inset Line, Now Available fo RHINORUSH 2/8 TaeguTec is pleased to announce the intoduction of wipe insets that extend tool life as well as achieving excellent suface finish to the RHINORUSH
More informationThreading Inserts UPDATED
atial ofile (55º and 60 ) Featues 4 Cutting edge inset Available in 60 & 55 patial pofiles NEW full pofile theading insets fo ISO and UN theads GOD RUSH coating gade to maximize tool life in all mateials
More informationPRODUCT HIGHLIGHTS. The Grades. Cutting tool materials suitable for universal use WPV10 (ISO P10) FV5: Finishing ISO M (Stainless Steel)
/20 FOR A LIMITED TIME SAVE 25% ON WALTER'S NEW ECONOMICAL ERFORM TURNING LINE! STARTING FROM $6.27 ER INSERT! E R F O R M TURNING INSERTS RODUCT HIGHLIGHTS Eicient machining with poven technology Fo vesatile
More informationGRADE ADDITION FOR CAST IRON TURNING
IO Class K20-K35 Available s Positive: CCMT, DCMT, CMT Negative: CNMA, CNMG, DNMG, NMG, TNMA, TNMG, VNMG, WNMG Chip Breakers Common tyle MT RT KT Flat Top GRADE ADDITION FOR CAT IRON TURNING Ingersoll
More informationOctober /10. Improved, New Grades and Chip Breakers for Machining Heat Resistant Super Alloys
October 2018 1/10 Improved, New Grades and Chip Breakers for Machining Heat Resistant uper Alloys 2/10 KEY POINT TaeguTec s new grades and chip breakers for heat resistant super alloys (HRA). TT3010 and
More informationCoroDrill Delta-C DRILLING. A Milling. C Deep hole. D Boring. F Indexes. The solid carbide drill a precision tool for high productivity hole making
The solid cabide dill a pecision tool fo high poductivity hole making Hole diametes.118.787 inch the fist choice in moden high pefomance machines Self-centeing dill No need fo pe- Good suface finish asy-to-egind
More informationHyperCoat CTPM125 EN
HypeCoat EN CEATIZIT secets of success Secets of success CEATIZIT is you patne fo exceptional had mateial solutions. Had mateials and tools fom CEATIZIT - ou solutions to complex poblems ae an integal
More informationSmall but Powerful Positive Insert with Dovetail Design
1/9 Small but Powerful Positive Insert with ovetail esign 2/9 Small but Powerful Positive Insert with ovetail esign TaeguTec is proud to introduce a brand new product line to its popular CHASEMI family.
More informationHIGH POSITIVE GEOMETRIES
HIGH POSITIVE GEOMETRIES TURNING Idea fo appication aeas within: www.anousa.com Phamaceutica Automotive Aeospace Measuing equipment Machine buiding Instument buiding 04/2015 High Positive Geometies Geometies
More informationA New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
More informationNew Large Diameter Drilling Solution with a Quick Change Tip and Indexable Inserts
Diameters (All with Inch Shanks) Inch: 1.032" - 1.781" (every 1/32") Metric: 26.0mm - 45.0mm (every 1mm) Bodies Inch Weldon Shanks Metric Shanks Available Upon Request Length/Diameter Ratio 5xD Tip Geometry
More informationNew Tip Geometry for Flat Bottom Hole-Making
New ip Geometry for Flat Bottom HoleMaking iameters: Metric: 8.00mm to 25.5mm (.5mm increments) Inch:.312" 1" Geometry: Steel & General Purpose PF esignation Grade: IN2505 Focus: ie Spring Industry SHCS
More informationNew FM Chip Breaker for Positive ISO Turning Inserts
hapes CCMT DCMT CMT TCMT VBMT / VCMT Corner Radii.008,.016,.031,.047 Grades Cermet (, ) CVD Coated (,, ) PVD Coated (, ) Feed Rate Range.003-.010 ipr Depth of Cut Range.020 -.100 (per side) New FM Chip
More informationE T HIGH PERFORMANCE MULTI-MATERIAL MILLING. The Mastermill VX range: Exceptional performance and reliability. UROPA OOL
E T UROPA OOL HIGH PERFORMANCE MULTI-MATERIAL MILLING The Mastemill ange: Exceptional pefomance and eliability. At Euopa Tool we ecognise that manufactuing components consistently and cost effectively
More informationTC burrs for tough applications especially in foundries, dockyards and steel constructions
TC bus fo tough applications especially in foundies, dockyads and steel constuctions High-pefomance cuts THOUGH, THOUGH-S TRUST BLUE Innovative high-pefomance cuts poviding exceptional impact esistance
More informationNew XEVT Line for Excellence in Aluminum Machining
1/14 New XEVT ine for Excellence in Aluminum Machining 2/14 To ensure excellence in aluminum machining across all industries, TaeguTec s CHASEAU line now comes in two new offerings: the XEVT 16 which is
More informationNow Available, New YNMG 2.53 Inserts. Insert Shapes YNMG Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Carbide: TT8115 (CVD) TT5080 (PVD)
Insert Sapes YNMG 2.53 Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Caride: TT8115 (CVD) TT5080 (PVD) Now Availale, New YNMG 2.53 Inserts Ingersoll is pleased to announce te expansion of te Gold-Rino
More informationSide Cutter with Low Cutting Resistance
TOOL NEWS Milling Side Cutte Seies B242A New Poduct Side Cutte with Low Cutting Resistance Vetical mount double-sided inset fo VAS and VOS. VAS0 VOS0 ASX0 1 Unique side cutte seies taking advantage of
More information4 Cutting Edges With Chip Former, For Grooving, Parting And Turning
4 Cutting Edges With Chip Former, For Grooving, Parting And Turning Inserts: Width:.020 -.125 (.5mm 3.18mm) Nose adius: From Sharp to Full adius Lead Angles: Also available to eliminate burrs T-Max: Up
More informationFerritic/martensitic cast steel. Stainless steel Austenitic
Machining Data for Threading ISO Material Condition Tensile Strength [N/mm ] Hardness HB Material < 0. %C Annealed 0 1 1 No. Non-alloy steel and cast steel, free cutting steel >= 0. %C Annealed 0 190
More informationExtended Flute Cutter & Splitter Insert
1/10 Extene Flute Cutter & Splitter Insert 2/10 TaeguTec has expane the MIRUS s line by aing extene flute cutters an splitter inserts to improve performance on roughing operations. Extene flute en mills
More informationUPDATED. High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making. Features & Benefits:
High Productivity, Quick Change, ipped Drills for Large Diameter Hole Making Ingersoll has introduced a new drilling line for large diameter hole applications. he Spadewist, with an optimized cutting edge
More informationHigh Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making
Diameters: Metric: 26.0mm - 32.9mm (.1mm increments) 33.0mm - 41.0mm (.5mm increments) Inch: 1.031-1.625 (every 1/32 ) High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making pade
More informationPcBn for cast iron Machining
spk competencies FOR CAST IRON MACHINING WITH PCBN tools technology application PcBn fo cast ion Machining CUTTING MATERIALS, TOOL SYSTEMS AND TECHNOLOGIES FOR TURNING 2 Machining cast ion mateials The
More informationNPA. ISCAR Introduces the Narrowest mm Indexable Slitting Cutter. New Product Announcement. Page 1 / 5
NPA ISCAR Introduces the Narrowest - 0.8 mm Indexable Slitting Cutter Page 1 / 5 Page 2 / 5 Highlights ISCAR is introducing the narrowest indexable slitting tool in the market: indexable SGST disk slitting
More informationDescription Series Page. Turning. Grades for holemaking 256 IN1030, IN2505, IN6505. Replaceable tip drill shanks 258
Turning Description Series Page IN1030, IN2505, IN6505 Grades for holemaking 256 Replaceable tip drill shanks 258 Drill/chamfer combo solution for inch & metric tap sizes 274 Indexable drill 276 CHAMFERING
More informationUTTING TOOLS. Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM
UTTING TOOLS Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM 7793 VXO12 Features & Benefits Silver satin plated surface & Improved heat treatment Improved body
More informationMaximize productivity in Superalloy machining!
Keeping the Customer First Tungaloy Report No. 404-US PVD coated grade for Superalloy turning Extended version TUNGALOY Maximize productivity in Superalloy machining! Features - The ideal grade for Superalloy
More informationProduct Expansion! ARNO FTA-milling system. Class leading technology - New. Face milling tool for cost reduction!
NEW www.arno.de FTA effective face milling! Face milling cutter for extreme conditions and high performance. High-Tech coating and accurate insert location Product Expansion! for excellent results. Class
More informationD101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
More information80_0VA90-_R-16 Series
Series Cartrige Shouler Milling Cutter Facing Slotting 90 CARTRIDGE SHOULDER MILLING ASSEMBLIES Applications: 80_0VA90 cutter series are assemble with cartriges for AP..16 milling inserts for face an shouler
More informationINCH. Revised. ADKT 1505R8T-FF a Combination of and
Page 1/7 MAY 2007 Revised ADKT 1505R8T-FF a Combination of and ISCAR is expanding the application range of the HELIMILL tools by a new 15 mm insert with a FEEDMILL configuration. The new ADKT 1505R8T-FF
More informationMILLING. Stellram tooling systems for all your milling requirements.
MILLING Stellam tooling systems fo all you milling equiements. MILLING All Stellam s poducts ae suppoted by a highly technical sales team backed by an extensive custome cae policy. Please contact us fo
More informationSetting new standards for milling tools
Milling Technology Effective volume machining in steel Pocess-safe chip evacuation in oughing Fo conventional machining jobs Roughing and fi nishing in one wok pocess Milling instead of polishing and ginding
More informationThread Turning Technical Section
Thread Turning Technical Section Contents: Page: Contents: Page: Carbide Grade Selection Type B inserts Recommended Cutting Speed Conversion of Cutting Speed to Rotational Speed Number of Threading Passes
More informationExpansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts
MILLING JANUARY Page 1 / 8 Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts JANUARY Page 2 / 8 Highlights Milling cutters carrying a double-sided triangular insert with six 10 mm
More informationThe new force in machining.
Product handbook Milling _ SILVER, BLACK, STRONG The new force in machining. Yesterday, it was machining. Today, it s tigering. Cutting tool materials with the Tiger tec technology brand are setting the
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More informationIntroduction. Inserts. Tools. Technical information. Contents D18 D20 D30
Contents D1 Introduction D2 Grade overview Grade description Chip grooves System characteristics for Classic Application for Classic D2 D3 D8 D10 D13 System characteristics for 900 Application for 900
More informationSQUARE 6 SQUARE SHOULDER MILLING GETS EVEN SMALLER
SQUARE 6 SQUARE SHOULDER MILLING GETS EVEN SMALLER SQUARE 6 PRODUCTIVITY WI COMPETITIVE EDGES This latest square-shoulder innovation is a result of our commitment to you, and a desire to engineer tooling
More information5315VA Series. Long Edge Milling Cutter
5315VA Series Long Edge Milling Cutter Profiling / Slotting LONG EDGE MILLING CUTTER The 5315VA family is the long edge cutter version of our versatile 7690VA shoulder milling series. This 5315VA series
More informationMAXIMILL MILLING SYSTEM ENGINEERED SIMPLICITY. 8 Cutting Edges. More milling. More parts. More profits.
MAXIMILL 491 MILLING SYSTEM ENGINEERED SIMPLICITY 8 Cutting Edges. More milling. More parts. More profits. www.ceratizit.com 22 We work hard to make things easy. It takes a lot of engineering and know-how
More informationNexus Cutting Tools. Accurate. Simplify. Nexus ShrinkMILL and Face Mills. Innovative. Solutions that are innovative, accurate, and simple.
Nexus Cutting Tools Solutions that are innovative, accurate, and simple. Minimize T.I.R. Maximize rigidity Increase tool life Lamina High-Performance Eliminate insert guesswork Minimize set up time Maximize
More informationContents. Turning. Boring. Milling. Adaptors and clamping units. General
Contents Turning Contents 15 Information 16 Indexable inserts and cutting tool materials 20 Toolholders for turning, grooving and threading 69 Technical information 206 Boring Contents 237 Information
More informationSuccess Stories (Version ) WWW. YG1. KR
Success Stories (Version 201805) WWW. YG1. KR YG602 on Austenitic Stainless Steel Case study Milling M Stainless Steel JIS SUS304 DIN X 5 CrNi 18 9, AISI 304 Operation Face Milling (Φ200, 12z) Stainless
More informationTURNING. Stellram Cutting Tool Products
TURNING Stellram Cutting Tool Products ATIstellram.com ATImetals.com Turning Machining Solutions for Mission Critical Metallics Increase productivity and reduce tooling costs in today s most challenging
More informationDOUBLE OCTOMILL ECONOMICAL FACE MILLING FAMILY FOR LARGE AND SMALL MACHINES
DOUBLE OCTOMILL ECONOMICAL FACE MILLING FAMILY FOR LARGE AND SMALL MACHINES DOUBLE OCTOMILL BOOST YOUR PRODU TWO SIZES Are now available to meet a wide variety of face milling challenges. The Double Octo
More informationEfficient Machining Solutions in Titanium Alloys. David J Wills
Efficient Machining Solutions in Titanium Alloys David J Wills Acknowledgement The following presentation is a result of collaboration of ATI s metallurgists, scientists and engineers in providing an effective
More informationPRIMARY GRADES TURNING TURNING / INSERTS / INTRODUCTION TO CARBIDE INSERTS
/ ISERTS / ITRODUCTIO TO CARBIDE ISERTS PRIMARY GRADES group PVD Coated grades Carbide CVD Ceramics CB PCD Uncoated grades Carbide Cermet P M K S H P01 P05 P10 P15 P20 P25 P30 P35 P40 P45 P50 M01 M05 M15
More informationTT8105: Expanded Product Line for Turning Steel at High Speeds
Insert Shapes Previous: CNMG43x CNMX43.5x, CNMX55x (Gold-Duty) DNMG43x, TNMG33x VNMG33x, WNMG43x New: CCMT21.5x, CCMT32.5x, CCMT43x CNMG33x, CNMG54x, CNMG64x DNMG3.53.5x DCMT21.5x, DCMT32.5x SCMT32.5x,
More informationNEW CERATIZIT 3x3 STEEL TURNING. The Perfect Combination
NEW CERATIZIT 3x3 STEEL TURNING SOLUTIONS The Perect Combination 2 SERVICE CERATIZIT website Online service O course we are also available or you online around the clock! On the new CERATIZIT website you
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT -
More informationBurrs. Table of Contents 2 I 202. Tool drive Contents Page HSS cutters (HSS = High-performance, high-speed steel) HSS rotary cutters 43-49
Bus 202 Bus Table of Contents Tool dive Contents Page Geneal infomation 3 The fast way to the best tool 4-5 Tool dive Contents Page HSS cuttes (HSS = High-pefomance, high-speed steel) HSS otay cuttes 43-49
More informationSUMMARY TECHNICAL INSTRUCTIONS. Technical Information. Geometries and feed rates. Cutting data. Carbide grades for grooving and parting off
SUMMARY TECHNICAL INSTRUCTIONS Technical Information Grooving / Side turning Face grooving Profiling Threading Parting off Page 2-5 6 7 8-9 10-11 Geometries and feed rates Cutting data Inserts type 217
More information7220VM Series. Disk Mill Cartridge Cutters
Series Disk Mill Cutters Slotting / Shoulder DISK MILL CARTRIDGE CUTTERS 7220VM Disk Mill Cutter series with adjustable cartridges are designed for machining deep slots or side shoulder milling operations.
More informationCutting Speed Vc [M/min] Hardness
HPD METRIC Non-alloyed steels, 1213, 13L13, 12, Cast steels Free-machining steels 12L14,1118 etc Low-alloyed steels, Cast steels(
More informationM.A. Ford Where high performance is the standard. Phone: or
For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and precision in advanced solid carbide
More informationTOOLS NEWS. The new high Al-(Al,Ti)N single layer coating significantly reduces edge fracturing. ISO Turning Inserts for Difficult to Cut Materials
TOO NEWS ISO Turning Inserts for Difficult to Cut Materials 0.5 Update BG Series Expansion The new high Al-(Al,Ti)N single layer coating significantly reduces edge fracturing. MP905 MT905 ISO Turning Inserts
More information5230VS Series. Chevron Long Edge Milling Cutter (Porcupine)
5230VS Series Chevron Long Edge Milling (Porcupine) Shoulder / Profiling / Slotting HIGH PERFORMANCE LONG EDGE MILLING CUTTERS The Stellram 5230VS09 and VS12 Series is perfectly quali ed for pro ling and
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling EN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
More informationTOOLMAKER SOLUTIONS Rotary Tool Blanks
TOOLMAKER SOLUTIONS Rotary Tool Blanks Cemented carbide blanks for drills and end mills TABLE OF CONTENTS HYPERION ROTARY TOOL BLANKS SOLID BLANKS 04 06 END MILL BLANKS WITH CHAMFER, GROUND TO HYPERION
More informationдля размещения заказа - VG-Cut Deep Grooving, Threading and Parting Off METRIC
Deep Grooving, Threading and Parting Off METIC Deep Grooving, Threading and Parting Off Complete ange of Solutions for External Turning Applications VAGUS Ltd., the leading supplier of premium thread turning
More informationCountersink Section 2018 Master Catalog
Countersink Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance
More informationCountersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute
Countersinks Countersinks Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute smooth cutting perfect chamfering countersinks Product Code: C108 This new generation
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT -
More informationMaxiMill HPC12 / HSV22 Milling with PCD and CBN
MaxiMill HPC12 / HSV22 Milling with PCD and CBN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
More informationNPA. New Gear Milling Solutions. New Product Announcement. Page 1 / 8
NPA New Product Announcement Page 1 / 8 New Gear Milling Solutions Page 2 / 8 Highlights ISCAR introduces new solutions for gear milling based on solid carbide milling heads and cutters carrying tangentially
More informationNPA. New Small Diameter Fast Feed Tools Carrying Inserts with Four Cutting Edges. New Product Announcement INCH MARCH 2018.
NPA New Product Announcement New Small Diameter Fast Feed Tools Carrying Inserts with Four Cutting Edges Page 1 / 7 Page 2 / 7 Highlights ISCAR is introducing new small diameter Fast Feed tools carrying
More informationCBN Grades. Insert types and cutting edge geometries. SUMIBORON Chipbreaker Break Master Type One-Use Wiper Insert Type. Uncoated SUMIBORON Grades
L SUMIBORO SUMIDIA L1 ~ L26 Gades Inset types and cutting edge geometies SUMIBORO Seies... L2 Recommended Gades... L3... L4 LF / LS / S Types... L5 SUMIBORO Chipbeake Beak Maste Type OneUse Wipe Inset
More informationContents E2. R a. Introduction. ProfileMaster. EcoCut. Index. Productivity. System overview E42 E3-E4. Designation system E43.
Contents E2 Introduction ProfileMaster Productivity E3-E4 System overview E42 Designation system E43 EcoCut System overview E6 Chip grooves, grades E44-E46 Designation system E7 Machining methods E47-E48
More informationExcellent stability und. ARNO SHORT-Cut -SIS. w w w. a r n o. d e. Introducing SHORT-Cut -SIS for internal groove turning. The new SHORT-Cut holder
Introducing SHORT-Cut -SIS for internal groove turning New w w w. a r n o. d e The new SHORT-Cut holder with optimum insert clamping. Easy handling and efficient in production. ARNO SHORT-Cut -SIS Excellent
More informationDHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
More informationUTTING TOOLS. Stellram Cutting Tools. 7713VR Round Insert Milling Cutter with Indexation. Inch.
UTTING TOOLS Stellram Cutting Tools 7713VR Round Insert Milling Cutter with Indexation Inch 7713VR Series Copy / Contour Milling Cutter ROUN INSERT MILLING CUTTER WITH INEXATION The 7713VR is our newest
More informationTapping products B59
Tapping Products B59 B60 Notes Hand Taps Taper, Plug and Bottoming Style - for Multi Purpose A3/A5/A7 Ansi EDP No. Bright Finish Bright Finish Bright Finish Thread per Inch No. of Taper Plug Bottoming
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
CUSTOM ADD-ONS FOR ENGLISH UNITS Specials Feed Control Valves See note below for location in the Specification Code V1 Dual Feed Manifold V2 Skip Feed Cam Bar (Not Shown) Please specify rapid distance,
More informationNEW. Outstanding performance in machining heat resistant alloys. positive inserts now available! TurnLine AH8000 SERIES
TurnLine Tungaloy Report No. 437-US AH8 SERIES Outstanding performance in machining heat resistant alloys NEW positive inserts now available! ACCELERATED MACHINING TurnLine New positive geometry inserts
More informationCarbide-tipped or Cermet-tipped Special Designs Ø>20mm up to 76.2mm HR 500 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER
Carbide-tipped or Cermet-tipped Special Designs Ø>20 up to 76.2 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER Pictograms Tool material Carbide Carbide-tipped Cermet tipped Internal coolant
More informationCARBIDE GRADE SELECTION/APPLICATION GUIDE
/ INSERTS / TECHNICHAL INFORMATION CARBIDE GRADE SELECTION/APPLICATION GUIDE Steels P Steels ISO P50 P40 P30 P20 P10 P01 Typical ailure modes Fracture Chipping Deormation Chipping Deormation Crater Deormation
More informationThe Art and Science of Milling Titanium.
Tom Hofmann Global Product Manager - Milling ATI Stellram The Art and Science of Milling Titanium. ATI Stellram, a business unit of ATI Engineered Products, and an Allegheny Technologies company. Increasingly
More informationNew CVD Coated Carbide. Gray and Nodular Cast Iron. for Gray and Nodular Cast Iron. New Bright Black (BB) Coating Technology
for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide Improved coating
More informationDEEP GROOVING DEEP GROOVING VDG-CB DEEP GROOVING VDG-METRIC DEEP GROOVING VDG-CB-METRIC DEEP GROOVING. Exclusive patented design!
78 Inserts Deep Grooving Insert Nomenclature Chart VDG Vee-ottom Deep Grooving 125 GOOVE IDT Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53 INSET EIGT.250.377 008 CONE DIUS
More informationSQUARE T4-08 & T4-12
SQUARE T4-08 & T4-12 SQUARE T4-08 & T4-12 DEFINITION Square T4 Definition Definition of Square T4-08/T4-12 Square = Square shoulder cutter T4 = Tangentially mounted inserts with 4 edges/insert 08/12 =
More informationDovetail insert clamping guarantees high productivity
MillLine Tungaloy Report No. 503-US DOTRIPLE-MILL Dovetail insert clamping guarantees high productivity CCELERTED MCHINING MillLine DoForce-Tri is a new series of tools with double-sided triangular insert
More informationCall: Fax: Visit:www.doriantool.com A-1
Call: 979-282-2861 Fax: 888-508-7055 Visit:www.doriantool.com E-mail:sales@doriantool.com A-1 Proven Performance Carbide Turning Inserts Technology Geometry Tolerances The physical characteristics of an
More informationCost reduction through Performance. SHARK-CUT + SHARK-CUT Rebore. Introducing Shark-Cut Rebore Tools and Inserts for boring
Introducing SharkCut Rebore Tools and Inserts for boring www.arno.de Due to the unique positioning and insert geometry excellent hole quality is achieved also for deeper holes. Easy handling and efficient
More information83% 110 pcs. 60 pcs. for Steel P Wheel Bearing for Automotive Industry YG3020. life. Low Alloy Steel CNMG UM,YG3020 (CNMG 432-UM,YG3020)
INSERT HIGHLIGHT for Steel P Wheel Bearing for Automotive Industry CNMG 120408-UM,YG3020 (CNMG 432-UM,YG3020) 83% 110 pcs Low Alloy Steel AISI 4140 JIS SCM440 DIN 42CrMo4 Vc Fn 350 m/min (1150 ft/min)
More information5 flute Trochoidal end mills with variable helix
BASIC LINE+ 5 flute Trochoidal end mills with variable helix The SCT 5 flute Trochoidal end mills combine a few unique characteristics to make them ideally suited for machining different types of steel
More informationLS MS RS TOOLS NEWS. The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing.
TOOL NEW 2016.10 Update IO Turning Inserts for Difficult to Cut Materials B214B eries Expansion The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing. MP9005 MT9005 MT9015
More informationDOUBLE SIDED POSITIVE INSERT WITH 6 CUTTING EDGES!
DOUBLE SIDED POSITIVE INSET WIT 6 CUTTING EDGES! s: 0-60 Cutting Edge : WNGU09 - WNGU3 - Geometry: ipos Corner Configurations:, 20, 3, 39, 62 Nominal Lead Angle: 0º Applications: oughing, finishing, one-cuts,
More informationMILLING End milling cutters with fixed cutting edges. Cx45
MILLING End milling cutters with fixed cutting edges 39 OptiMill -Uni-HPC Short design M3090 Milling cutter diameter: 3,00-20,00 mm Special features: Unequal spacing Groove milling and general applications
More informationCARBIDE. Being the best through innovation NC-SPOTTING DRILLS. - CENTERING and CHAMFERING
Being the best through innovation - CENTERING and CHAMFERING SELECTION GUIDE ITEM MODEL DESCRIPTION SIZE MIN MAX PAGE D5306 D5307, D D 1 D5315 D5318, D3.0 D 111 RECOMMENDED CUTTING CONDITIONS 112 8 phone:+82-32-526-09,
More information-CC-SUS. Features & Benefits. Revolutionary Technology
Features & Benefits Revolutionary Technology 1 www.osgtool.com 800.837.2223 Cutting Data Great consistency, reliability and long tool life Tool M6 x 1.0 Work Material 304 Stainless Tapping Speed 33 SFM
More informationMaxiMill the 90 shoulder and slot milling system
MaxiMill 211 - the 90 shoulder and slot milling system CERATIZIT - the parent companies Headquarters and parent company in MAMER / Luxembourg Parent company in REUTTE / Austria Hard material matters -
More informationNEW ANSI BORING BAR PROGRAM
NEW ANSI BORING BAR PROGRAM STEEL q CARBIDE q CARBIDE WITH COOLANT q INSERTS 2011 TABLE OF CONTENTS PAGE TABLE OF CONTENTS 1 NOMENCLATURE 2 INSERTS 3 CUTTING DATA 3-5 BORING BARS ORDERING INFORMATION MIN
More informationYE-SY16. Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine
YE-SY16 Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine FEATURES OF GEOMETRY Shorter thread length will reduce chip trouble at higher speed tapping conditions Tolerance
More informationCHAPTER 3 EXPERIMENTAL PROCEDURE
60 CHAPTER 3 EXPERIMENTAL PROCEDURE The objective of this study is to evaluate the performance of cermet tools which is subjected to either plain, coated, cryogenically treated. In order to evaluate these
More informationCoated Carbide for Highly Stable Cast Iron Machining
CA3-Series CVD Coated Carbide for Cast Iron Coated Carbide for Highly Stable Cast Iron Machining Improved Coating Adhesion Prevents Chipping and Provides Stable Machining Micro TiCN Coating Provides Excellent
More information4JER 4JER. For Superalloy Machining. High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel.
Solid End Mill For Superalloy Machining High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel Resistant to Breakage and Capable of Stable and Trochoidal Machining Long Tool Life
More informationMFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining
Micro Diameter High Feed Mills Micro Dia. Cutter for High Feed Machining Low Resistance and Durable Against Chatter for Highly Efficient Machining Shortens Rough Machining Times Replaces Solid End Mills
More informationMAXIDRILL 900 TAKE DRILLING TO A WHOLE NEW LEVEL.
MAXIDRILL 900 TAKE DRILLING TO A WHOLE NEW LEVEL. www.ceratizit.com 22 2 MaxiDrill 900. Meet the next MaxiDrill 900 intro headline generation in drilling performance. will go here. MaxiDrill 900 delivers
More information