Polymer Matrix Composites: Materials Properties
|
|
- Austen Nichols
- 6 years ago
- Views:
Transcription
1 Composite Materials Handbook Volume 2 CMH-17 COMPOSITE MATERIALS HANDBOOK Volume 2 Polymer Matrix Composites: Materials Properties The Composite Materials Handbook, referred to by industry groups as CMH-17, is a sixvolume engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials. R-423 Polymer Matrix Composites: Materials Properties T he second volume of this six-volume compendium contains statistically-based data for polymer matrix composites that meets specific CMH-17 population sampling and data documentation requirements, covering material systems of general interest. Selected historical data from previous versions of the handbook that do not meet current data sampling, test methodology, or documentation requirements, but that still are of potential interest to industry are also included in this volume. Polymer Matrix Composites: Materials Properties Volume 2
2 FOREWORD... ii Summary of Changes... xi CHAPTER 1 GENERAL INFORMATION INTRODUCTION TO THE HANDBOOK OVERVIEW OF HANDBOOK CONTENT PURPOSE AND SCOPE OF VOLUME ORGANIZATION OF DATA IN VOLUME PRESENTATION OF DATA Complete documentation Data set description Summary tables Individual data tables - normalized data Individual data tables - unnormalized data Individual data tables - notched laminate data Individual data tables - bearing data Individual data tables - bearing/bypass data MIL-HDBK-17 Rev F data Appended MIL-HDBK-17 Rev A data MATERIALS SYSTEMS Materials system codes Index of materials MATERIAL ORIENTATION CODES Laminate orientation codes Stacking sequence notation Ply percentage notation Braiding orientation codes SYMBOLS, ABBREVIATIONS, AND SYSTEMS OF UNITS Symbols and abbreviations Constituent properties Laminae and laminates Subscripts Superscripts Acronyms System of units DEFINITIONS...36 CHAPTER 2 carbon FIBER COMPOSITEs INTRODUCTION COMPLETE DOCUMENTATION Carbon - epoxy prepreg tape T700GC 12k/2510 unidirectional tape T700 24k/E765 unidirectional tape Carbon - epoxy prepreg fabric T700SC 12k/2510 plain weave fabric T300 3k/E765 plain weave fabric T300 6k/E765 5-harness satin weave fabric iv
3 AS4C 3k/HTM45 8-harness satin weave fabric AS4C 3k/HTM45 plain weave fabric HTA k/M20 plain weave fabric Carbon - epoxy wet-lay-up fabric HTA k/Epocast A/B plain weave fabric MIL-HDBK-17 REV F LEGACY DATA Carbon - epoxy prepreg tape T500 12k/976 unidirectional tape HITEX 33 6k/E7K8 unidirectional tape AS4 12k/E7K8 unidirectional tape Celion 12k/E7K8 unidirectional tape AS4 12k/938 unidirectional tape Celion 12k/938 unidirectional tape AS4 12k/3502 unidirectional tape AS4/ (bleed) unidirectional tape AS4/ (no bleed) unidirectional tape T300 15k/976 unidirectional tape IM7 12k/8551-7A unidirectional tape IM6 12k/ unidirectional tape IM7 12k/8552 unidirectional tape IM7 12K/977-2 unidirectional tape AS4 12k/997 unidirectional tape T k/976 unidirectional tape IM7 12k/PR 381 unidirectional tape T800HB 12k/ unidirectional tape Carbon - epoxy prepreg fabric T300 3k/934 plain weave fabric Celion 3000/E7K8 plain weave fabric HITEX 33 6k/E7K8 plain weave fabric AS4 3k/E7K8 plain weave fabric AS4 3k/ plain weave fabric AS4 3k/3501-6S 5-harness satin weave fabric AS4 6k/3502-6S 5-harness satin weave fabric AS4 3k/ (bleed) 5-harness satin weave fabric AS4 3k/ (no bleed) 5-harness satin weave fabric T300 3K/977-2 plain weave fabric T300 3K/ harness satin weave fabric T k/976 plain weave fabric T k/976 8-harness satin weave fabric T700S 12k/ plain weave fabric Carbon - epoxy wet-lay-up fabric T300 3k/EA harness satin weave fabric Carbon - epoxy resin-transfer-molded fabric AS4 6k/PR500 5-harness satin weave fabric IM7 6k/PR500 4-harness satin weave fabric Carbon - bismaleimide prepreg tape and fabric T300 3k/F650 unidirectional tape T300 3k/F650 8-harness satin weave fabric T300 3k/F652 8-harness satin weave fabric AS4/ unidirectional tape T k/ harness satin weave fabric T k/ plain weave fabric v
4 2.3.6 Carbon - bismaleimide resin-transfer-molded fabric IM7 6k/ RTM 4-harness satin weave fabric Carbon - polyimide prepreg fabric Celion 3000/F670 8-harness satin weave fabric Carbon - thermoplastic prepreg tape IM6 12k/APC-2 unidirectional tape Carbon - cyanate ester prepreg tape M55J 6k/954-3 unidirectional tape CHAPTER 3 Boron fiber composites INTRODUCTION COMPLETE DOCUMENTATION MIL-HDBK-17 REV F LEGACY DATA Boron - epoxy prepreg tape B4.0 / 5521 unidirectional tape...1 CHAPTER 4 glass FIBER COMPOSITES INTRODUCTION COMPLETE DOCUMENTATION Glass - epoxy prepreg fabric E-Glass 7781 Finish 558/ harness satin weave fabric MIL-HDBK-17 REV F LEGACY DATA Glass - epoxy prepreg tape and fabric S k/SP 381 unidirectional tape S k/SP 381 unidirectional tape E-Glass 7781 G 816/PR 381 plain weave fabric Glass - epoxy wet-lay-up /EA harness satin weave fabric...50 CHAPTER 5 Quartz FIBER composites INTRODUCTION COMPLETE DOCUMENTATION MIL-HDBK-17 REV F LEGACY DATA Quartz - bismaleimide prepreg fabric Astroquartz II/F650 8-harness satin weave fabric...1 appendix a1. CMH-17A DATA...1 A1.1 GENERAL INFORMATION...1 A1.2 INTRODUCTION...2 A1.3 HANDBOOK TEST PROGRAM...2 A1.3.1 Objectives...2 A1.3.2 Preimpregnated materials...2 A1.3.3 Test panels...2 A1.3.4 Test procedures...3 A Tensile tests...3 A Compression tests...3 A Shear tests...3 A Interlaminar shear...3 A Flexural tests...3 vi
5 A Bearing strength...3 A1.3.5 Dry conditioning...3 A1.3.6 Wet conditioning...4 A1.3.7 Test schedule...4 A1.4 DATA PRESENTATION...4 A1.4.1 Epoxy-fiberglass laminates...4 A1.4.2 Phenolic-fiberglass laminates...4 A1.4.3 Silicone-fiberglass laminates...4 A1.4.4 Polyester-fiberglass laminates...4 A1.4.5 Boron-epoxy laminates...5 INDEX...1 vii
COMPOSITE MATERIALS HANDBOOK. Volume. Structural Sandwich. Composites
COMPOSITE MATERIALS HANDBOOK Structural Sandwich Volume 6 Composites TABLE OF CONTENTS Page FOREWORD... ii CHAPTER 1 GENERAL INFORMATION... 1 1.1 INTRODUCTION TO THE HANDBOOK... 1 1.2 OVERVIEW OF HANDBOOK
More informationCOMPOSITES. Composite Materials: Structure, General Properties, and Applications
COMPOSITES Composite Materials: Structure, General Properties, and Applications COMPOSITES Composite Materials Metal Matrix Composites (MMC) Mixture of ceramics and metals reinforced by strong, high-stiffness
More informationCYCOM 2237 POLYIMIDE RESIN SYSTEM
DESCRIPTION CYCOM 2237 is Cytec Engineered Materials version of PMR-5. It is formulated for high temperature applications where low void content is critical. CYCOM 2237 has the best overall balance of
More informationAdvanced Composite Materials
Advanced Composite Materials Moscow, 2017 About Company Prepreg-ACM is a Rusnano portfolio company founded in 2009; The company is producing wide range of unidirectional, bidirectional woven and non-woven
More informationCycom Modified Cyanate Prepreg System
TECHNICAL DATA SHEET AEROSPACE MATERIALS Cycom 55-2 Modified Cyanate Prepreg System DESCRIPTION The Rigidite 55-2 Prepreg System is a 350 F (177 C) curing modified cyanate ester resin. This system has
More informationCYCOM Epoxy Resin System
T E C H N I C A L D A T A S H E E T CYCOM 9773 EPOXY RESIN SYSTEM CYCOM 9773 Epoxy Resin System DESCRIPTION CYCOM 9773 is a 350 F (177 C) curing resin. It is a toughened epoxy resin with 350 F (177 C)
More informationPREPREG System BX Low-temperature. Tooling Structural parts
PREPREG System BX Low-temperature Tooling Structural parts Overview on mold making Metal and fiber composite molds are used to manufacture components from PREPREG materials. Fiber composite molds are produced
More informationPolymer Matrix Composites: Guidelines for Characterization of Structural Materials
Composite Materials Handbook Volume 1 CMH-17 Polymer Matrix Composites: Guidelines for Characterization of Structural Materials The Composite Materials Handbook, referred to by industry groups as CMH-17,
More informationRM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS
RM-3004 OUT OF AUTOCLAVE PROCESSABLE BISMALEIMIDE (BMI) PREPREG FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-3004 Out of Autoclave (OOA) Processable Bismaleimide (BMI) Prepreg Product Information Developed
More informationSPECIALTY MATERIALS, INC.
DETERMINATION OF CROSS-PLY LAMINATE STACKING SEQUENCE FOR THE COMPRESSION STRENGTH TESTING OF A UNIDIRECTIONAL BORON EPOXY MATERIAL Submitted to SAMPE Fall Technical Conference Dallas, November 6-9, 2006
More informationCYCOM 2020 EPOXY PREPREG
DESCRIPTION CYCOM 2020 is a versatile curing, toughened epoxy resin that can be cured from 180 F to 350 F (80 C to 180 C), depending on service temperature requirements. This prepreg resin extracts the
More informationComposite Materials and their Properties. Ing. Bohuslav Cabrnoch, Ph.D. VZLÚ, a.s.
Composite Materials and their Properties Ing. Bohuslav Cabrnoch, Ph.D. VZLÚ, a.s. Composite material Introduction Material made from two or more constituent materials with significantly different physical
More informationNovel Test Setup for Determination of High Temperature Mechanical Properties of Composites
Novel Test Setup for Determination of High Temperature Mechanical Properties of Composites 6th International Conference on Composites Testing and Model Identification Aalborg, 23.04.13 A. Chripunow 1,
More informationA Study on Cotton-Ramie Fabric Reinforced Composites
International Journal of Materials Science ISSN 0973-4589 Volume 12, Number 1 (2017), pp. 117-125 Research India Publications http://www.ripublication.com A Study on Cotton-Ramie Fabric Reinforced Composites
More informationVACUUM INFUSION AND CURING OF CARBON FIBER/BENZOXAZINE COMPOSITES FOR HIGH TEMPERATURE APPLICATIONS
VACUUM INFUSION AND CURING OF CARBON FIBER/BENZOXAZINE COMPOSITES FOR HIGH TEMPERATURE APPLICATIONS Amol Ogale 1, David Leach 2, Ehsan Barjasteh 2, Helder Barros-Abreu3, Dale Brosius 4, Jens Schlimbach
More informationEpoxide equivalent weight ASTM D 1652 g/eq C (77 F), Brookfield ASTM D 2196 cp or mpa.s 650
Starting Formulation EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Epoxy Resin System for Infusion and RTM EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Introduction EPON FlameX
More informationMODELING OF HARNESS SATIN WEAVE USING FINITE ELEMENT METHOD
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS MODELING OF HARNESS SATIN WEAVE USING FINITE ELEMENT METHOD Yutaka Arimitsu, Masahiro Eki, Yuji Sogabe, Zhiqiang Wu Ehime University Keywords: textile
More informationPark Advanced Composite Materials. E-752-LT Epoxy Prepreg. Product Overview. Applications / Qualifications. Key Features & Benefits
E-752-LT Epoxy Prepreg Product Overview Park s E 752 LT is a toughened; 350 F (177 C) cure epoxy resin system with 315 F (157 C) wet Tg for primary and secondary structural applications. E 752 LT is formulated
More informationBrendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University of Nevada Las Vegas
MEG 495/695 Special Topics: Entertainment Engineering Introduction to Composite Materials Brendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University
More informationCURVED BEAM TEST BEHAVIOR OF 3D WOVEN COMPOSITES
CURVED BEAM TEST BEHAVIOR OF 3D WOVEN COMPOSITES Christopher Redman, Harun Bayraktar, Michael McClain Albany Engineered Composites 112 Airport Drive Rochester, NH 03867 ABSTRACT The use of traditional
More informationMilitary Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C *MIL-P-997C MIL-P-997D Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset
More informationMilitary Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine
More informationFunktionsintegrierter Leichtbau mit Carbonfaser verstärkten Thermoplastwerkstoffen. Dr. Andreas Erber Werkstoff-Forum; Hannover Messe
Funktionsintegrierter Leichtbau mit Carbonfaser verstärkten Thermoplastwerkstoffen Dr. Andreas Erber Werkstoff-Forum; Hannover Messe 2015-04-15 Company Profile. SGL Group One of the world s largest manufacturers
More informationPerspectives on Emerging Composite Technologies from a Materials Supplier
Perspectives on Emerging Composite Technologies from a Materials Supplier Trevor Gundberg, P.E. Director of Composites Engineering September 15, 2016 Introduction to Vectorply End Use Markets Served &
More informationTHERMOPLY COMMINGLED E-GLASS/POLYPROPYLENE WOVEN & STITCH-BONDED BIAXIAL
THERMOPLY COMMINGLED E-GLASS/POLYPROPYLENE WOVEN & STITCH-BONDED BIAXIAL Continuous reinforcement fiber thermoplastic composites offer many desirable attributes including specific high strength & modulus,
More informationGrowth Opportunities in the Global Composites Market
Growth Opportunities in the Global Composites Market Published: May 2016 Trends, opportunities and forecast in this market to 2021 by fiber type (fiberglass, carbon fiber, aramid fiber), resin type (thermoplastic,
More informationAnalysis of Mechanical Properties of Silk/Flax Hybrid Epoxy Composite Material
Analysis of Mechanical Properties of Silk/Flax Hybrid Epoxy Composite Material P.Ramesh 1, J.Ayyamperum 2, P.Boopathi 3, V.M.Gokulakannan4 Assistant Professor, Department of Mechanical Engineering, Muthayammal
More informationGuide to Composites. PRO-LITE Technical Information. Introduction
Introduction To fully appreciate the role and application of composite materials to a structure, an understanding is required of the component materials themselves and of the ways in which they can be
More informationApplication of FRP Materials for Construction of Culvert Road Bridges
Application of FRP Materials for Construction of Culvert Road Bridges Manufacturing and life-cycle cost analysis REZA HAGHANI JINCHENG YANG Department of Civil and Environmental Engineering Division of
More informationInvestigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials
Available online at www.sciencedirect.com Procedia Engineering 10 (2011) 3279 3284 ICM11 Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials
More informationRicerca e Sviluppo Produzione resine Servizio clienti Servizio tecnico
Structure Delta-Tech Spa Ricerca e Sviluppo Produzione resine Servizio clienti Servizio tecnico Delta-Preg Spa Uninominale (25% dell energia di processo fornita dall impianto fotovoltaico) Vendite e Marketing
More informationAdvanced General Aviation Transport Experiments
Advanced General Aviation Transport Experiments A Basis and B Basis Design Allowables for Epoxy Based Prepreg TORAY T700GC-12K-31E/#2510 Unidirectional Tape [US Units] AGATE-WP3.3-033051-132 November 2002
More informationPRODUCT BENEFITS/FEATURES Good resistance to galvanic corrosion Low outgassing Low dielectric performance
BTCy-1 Resin System PRODUCT TYPE 350 F (177 C) Cure Cyanate Ester TYPICAL APPLICATIONS Aircraft Spacecraft High Temperature Radomes and Antennae Radar Transparent Structures Low Outgassing Applications
More informationFILM ADHESIVES NOMINAL CURE TEMP F (C ) / TIME. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 260 (126) / 20 min Cream
FILM ADHESIVES LC-E220 LC-E221 LC-E221ET LC-E221FR LC-E221QC LC-E222 LC-E23 LC-E224 LC-E225 Elevated Tg vs. LC-E221 Additional vs LC-E221 with Accelerated Cure Cycle vs LC-E221 Optically Clear, Low Temp
More informationMANUFACTURING PROCESSES PREPREGS
PREPREGS Prepregging The reinforcement (carbon, fiberglass or aramid fiber or cloth) is saturated by dipping through the liquid resin. In an alternate method called a Hot Melt Process the resin is impregnated
More informationCare and Repair of Advanced Composites
Care and Repair of Advanced List of Chapters: Foreword Preface to the Preface to the First Edition Chapter 1 Introduction to and Care of Composite Parts 1.1 Definition of 1.2 History of Composite Materials
More informationAVIMID R POLYIMIDE COMPOSITE
DESCRIPTION AVIMID R is a high temperature, 581 F (305 C) Tg*, thermoset polyimide resin with good 500 F (260 C) wet and 550 F (288 C) dry service capability. AVIMID R has outstanding thermal oxidative
More informationHealable, Shape Memory Polymers for Reflexive Composites
Healable, Shape Memory Polymers for Reflexive Composites Thomas Barnell Research Engineer This work was funded under a NASA SBIR, Contract number NNL06AA07C from NASA Langley. barnelltj@crgrp.com (937)
More informationCOMPOSITES MATERIALS FOR AVIATION INDUSTRY
HENRI COANDA AIR FORCE ACADEMY ROMANIA INTERNATIONAL CONFERENCE of SCIENTIFIC PAPER AFASES 2012 Brasov, 24-26 May 2012 GENERAL M.R. STEFANIK ARMED FORCES ACADEMY SLOVAK REPUBLIC COMPOSITES MATERIALS FOR
More informationIMPACT RESISTANCE AND TOLERANCE OF INTERLEAVED RTM LAMINATES
IMPACT RESISTANCE AND TOLERANCE OF INTERLEAVED RTM LAMINATES Andre Duarte 1, Israel Herszberg 2 and Rowan Paton 3 1 Sir Lawrence Wackett Centre for Aerospace Design Technology, Royal Melbourne Institute
More informationDocument No.: NPS NCAMP Process Specification
Date: November 10, 2014 Document No.: NPS 85321 NCAMP Process Specification Fabrication of NMS 532 Qualification, Equivalency, and Acceptance Test Panels (Cytec Cycom 5320-1) Prepared by: Amy Buxman (Cytec),
More informationAdvancing Composites Education and Training through Curriculum Design
Advancing Composites Education and Training through Curriculum Design George D. Gray Applied and Engineering Technologies Division Wichita Area Technical College Abstract This paper will outline the increasing
More informationTECHNICAL DATA NEAT RESIN MECHANICAL PROPERTIES
TYPICAL APPLICATIONS Marine Structures Dielectric Structures Aerospace Structures PRODUCT FORMS Unitape to 24 Inches Wide Fabric Prepreg to 50 Inches Wide TYPICAL CURE PARAMETERS (If Aerospace applications
More informationCold-curing epoxy system based on Araldite LY 564 / Hardener HY 560
Ciba Specialty Chemicals Performance Polymers Structural Composites MATRIX SYSTEMS FOR AEROSPACE COMPOSITES MATRIX SYSTEMS FOR INDUSTRIAL COMPOSITES DATA SHEET Cold-curing epoxy system based on Araldite
More information3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products Selection Guide Revision E 3 Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant
More informationStructural composites in industrial applications: future solutions for today's engineering challenges in design and simulation
Structural composites in industrial applications: future solutions for today's engineering challenges in design and simulation Prof. dr. ir. Wim VAN PAEPEGEM Mechanics of Materials and Structures (MMS)
More informationC A R B O N F I B E R
CARBON FIBER 101 What is this stuff anyway? Carbon fiber is a high strength, high stiffness, low weight synthetic fiber that can be used in a wide variety of aesthetic and structural applications. Carbon
More informationISO 180 INTERNATIONAL STANDARD. Plastics Determination of Izod impact strength. Plastiques Détermination de la résistance au choc Izod
INTERNATIONAL STANDARD ISO 180 Third edition 2000-12-15 Plastics Determination of Izod impact strength Plastiques Détermination de la résistance au choc Izod Reference number ISO 180:2000(E) ISO 2000 PDF
More informationPart 4 MECHANICAL PROPERTIES
Part 4 MECHANICAL PROPERTIES Fiber Composite Materials M. S. Ahmadi 192 TENSILE PROPERTIES Tensile properties, such as tensile strength, tensile modulus, and Poisson s ratio of flat composite laminates,
More informationTHE DESIGN OF EXTERNALLY BONDED REINFORCEMENT (EBR) FOR REINFORCED CONCRETE STRUCTURES BY MEANS OF FIBRE REINFORCED POLYMERS (FRP)
THE DESIGN OF EXTERNALLY BONDED REINFORCEMENT (EBR) FOR REINFORCED CONCRETE STRUCTURES BY MEANS OF FIBRE REINFORCED POLYMERS (FRP) Introduction Dott. Ing. Giovanni Cerretini Studio Technica (studio@technica.net)
More informationANALYSIS OF FORMABILITY OF THICK COMPOSITE COMPONENT UNDER DOUBLE- DIAPHRAGM FORMING PROCESS
ANALYSIS OF FORMABILITY OF THICK COMPOSITE COMPONENT UNDER DOUBLE- DIAPHRAGM FORMING PROCESS Hassan Alshahrani Mehdi Hojjati Concordia Center for Composites, Concordia Center for Composites, 1455 De Maisonneuve
More informationOverview of mechanical properties of polymer matrix composites
Overview of mechanical properties of polymer matrix composites Dr. Suhasini Gururaja Assistant Professor Aerospace Engineering, IISc, Bangalore (Parts of the material for this presentation has been borrowed
More informationDATA SHEET CARBON FABRIC
CARBON FABRIC Carbon fiber, also referred to as graphite fiber, is one of the strongest and stiffest reinforcements available. When properly engineered, carbon fiber advanced composites can achieve the
More informationContinuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications
Continuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications Thomas Smith, President TenCate Performance Composites Kipp Grumm, PE Advanced Development
More informationEffect of PEK Content on Fracture Toughness of Glass Woven Fabric / Phenolic Resin Composites
Effect of PEK Content on Fracture Toughness of Glass Woven Fabric / Phenolic Resin Composites Y.Q. Sun 1,2, J.H. Li, 2 J.B. Wang, 2 S.R. Zheng 3 and M.L. Sun 3 1 Laboratory for Nonlinear Mechanics of Continuous
More informationDocument No.: NPS NCAMP Process Specification. Fabrication of NMS 688 Qualification, Equivalency, and Acceptance Test Panels (TenCate TC250)
Date: July 29, 2008 Document No.: NPS 81688 NCAMP Process Specification Fabrication of NMS 688 Qualification, Equivalency, and Acceptance Test Panels (TenCate TC250) Prepared by: Barry Meyers (TenCate),
More informationDiscoTex : Highly Formable Carbon Fiber Fabric
DiscoTex : Highly Formable Carbon Fiber Fabric Elizabeth K. Goodine Pepin Associates 15 Log Home Rd Greenville, ME 04441 ABSTRACT The aerospace structures community continues to face manufacturing, performance,
More informationComposites Processing
Composites Processing Fabrication Methods Wet Layup Prepreg Layup Filament Winding Fiber placement/fiber steering RTM/VaRTM Press Molding Pultrusion Wet Layup Fabric plies are wetted out and then placed
More informationSupplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA
Report No. 51A REINFORCED PLASTICS Supplement A by WING SIEN FONG October 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
More informationCarbon Fiber SMC Technology for Lightweight Structures
Carbon Fiber SMC Technology for Lightweight Structures Matt Kaczmarczyk Senior Design Engineer Quantum Composites- AS9100C:2009 / ISO9001:2008 1310 South Valley Center Drive Bay City, Michigan 48706-9798
More informationMECHANICAL CHARACTERIZATION OF STRETCH BROKEN CARBON FIBER MATERIALS IM7 FIBER IN 8552 RESIN
MECHANICAL CHARACTERIZATION OF STRETCH BROKEN CARBON FIBER MATERIALS IM7 FIBER IN 8552 RESIN Guenther Jacobsen Hexcel Corporation 6700 W. 5400 S. Salt Lake City, UT 84118 ABSTRACT Interest in aligned discontinuous
More informationPRODUCT DATA SHEET TYPICAL NEAT RESIN PROPERTIES. Dielectric Constant at 10 Ghz on 4581 quartz Loss Tangent at 10 Ghz on 4581 quartz...0.
PRODUCT TYPE 250 F (121 C) Cure Epoxy TYPICAL APPLICATIONS Secondary Aircraft Structures Radomes with Spectra, Glass, Quartz & Kevlar Reflectors Sporting Goods Knee Braces and Other Related Medical Items
More informationLow Temperature Mechanical Testing of Carbon-Fiber/Epoxy-Resin Composite Materials
NASA Technical Paper 3663 Low Temperature Mechanical Testing of Carbon-Fiber/Epoxy-Resin Composite Materials Alan T. Nettles and Emily J. Biss November 1996 NASA Technical Paper 3663 Low Temperature Mechanical
More informationThe Flexural Properties of Glass Fabric/Epoxy -Rigid Polyurethane Foam Core Sandwich Composites at Different Span to Depth Ratios and Densities
Proc. of the Intl. Conf. on Advances In Engineering And Technology - ICAET-214 ISBN: 978-1-63248-28-6 doi: 1.15224/ 978-1-63248-28-6-3-87 The Flexural Properties of Glass Fabric/Epoxy -Rigid Polyurethane
More informationModule 1: Introduction to Composites. Lecture 7: Fabrication Processes. The Lecture Contains: Wet/Hand Lay-Up. Spray Lay-Up.
The Lecture Contains: Wet/Hand Lay-Up Spray Lay-Up Autoclave Curing Filament Winding Pultrusion References file:///d /Web%20Course%20(Ganesh%20Rana)/Dr.%20Mohite/CompositeMaterials/lecture7/7_1.htm[8/18/2014
More informationHexcel 8552S AS4 Plain Weave Fabric Prepreg 193 gsm & 38% RC Qualification Material Property Data Report
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University CAM-RP--6 April 4, Revision N/C Hexcel 855S AS4 Plain Weave Fabric Prepreg 9 gsm & 8% RC Qualification Material Property Data Report FAA
More informationDURABILITY OF WOVEN COMPOSITE STRUCTURES
DURABILITY OF WOVEN COMPOSITE STRUCTURES SATRIO WICAKSONO SCHOOL OF MECHANICAL AND AEROSPACE ENGINEERING 214 DURABILITY OF WOVEN COMPOSITE STRUCTURES SATRIO WICAKSONO School of Mechanical and Aerospace
More informationStudy of the Curing Process of CFRP by Means of Electricity
Study of the Curing Process of CFRP by Means of Electricity Heating of the Carbon Fiber Reinforced Polymer (CFRP) during the curing process by conducting electricity through the fibers (Baltic Yachts)
More informationFeasibility Analysis for Electrically-Powered Hoverboard
Feasibility Analysis for Electrically-Powered Hoverboard A Senior Project presented to the Faculty of the Aerospace Engineering Department California Polytechnic State University, San Luis Obispo In Partial
More informationNumerical and experimental investigation of bolted joints
MultiCraft International Journal of Engineering, Science and Technology Vol. 3, No. 8, 2011, pp. 285-296 INTERNATIONAL JOURNAL OF ENGINEERING, SCIENCE AND TECHNOLOGY www.ijest-ng.com 2011 MultiCraft Limited.
More informationVOUGHT AIRCRAFT INDUSTRIES, INC.
AIRCRAFT INDUSTRIES, INC. P.O Box 655907 Dallas, TX 75265-5907 Cage Code 80378 VSS SL-0 REV. DATE OF ISSUE: SHEET OF 8 : SUPERSESSION LIST OF HERITAGE STANDARD SPECIFICATIONS TRANSITION FROM This document
More informationImproving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites. ArmorGuard ARMORCOTE
Improving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites ArmorGuard ARMORCOTE Cosmetic Quality Products with the best cosmetics are perceived to be higher quality are
More informationA RAPID HEATING PROCESS FOR OUT-OF-AUTOCLAVE CURING OF TOUGHENED EPOXY PREPREGS
A RAPID HEATING PROCESS FOR OUT-OF-AUTOCLAVE CURING OF TOUGHENED EPOXY PREPREGS Dale Brosius and Benjamin Luedtke, Quickstep Composites LLC Karl Gruenberg, Vector Composites, Inc. 3251 McCall Street Dayton,
More informationMultiaxial Non-Crimp Fabric (NCF) Reinforcements
Multiaxial Non-Crimp Fabric (NCF) Reinforcements Owens Corning is redefining product performance to provide composite solutions that help our customers win. As a world leader in glass science, Owens Corning
More informationInfluence of the Stacking Sequence on the Tensile Properties of Hybrid Composite
Influence of the Stacking Sequence on the Tensile Properties of Hybrid Composite Dr. Noori Hasoon Mohammed Al-Saadi Assistant Professor,. Dijlah University, building and Construction Engineering ABSTRACT
More informationStatistics for Allowable Generation. Statistically Based Material Allowables (Not Design Values) CMH-17 statistical analysis methods
Statistics for Allowable Generation Statistically Based Material Allowables (Not Design Values) CMH-17 statistical analysis methods September 14-16, 2010 A- and B-basis Values Design values must be chosen
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12215-1 First edition 2000-09-01 Small craft Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate Petits navires
More informationPREVENT AND CORRECT MANUFACTURING DEFECTS OF COMPOSITE STRUCTURAL PARTS
PREVENT AND CORRECT MANUFACTURING DEFECTS OF COMPOSITE STRUCTURAL PARTS www.esi-group.com Manage Each Step of the Composites Manufacturing Chain with PAM-COMPOSITES PAM-COMPOSITES allows you to define
More informationISO INTERNATIONAL STANDARD. Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test
INTERNATIONAL STANDARD ISO 179-1 Second edition 2010-06-15 Plastics Determination of Charpy impact properties Part 1: Non-instrumented impact test Plastiques Détermination des caractéristiques au choc
More informationESI s Composites Simulation Solution
ESI s Composites Simulation Solution Integrated solution to simulate the manufacturing of structural composites components Dr. Xiaoshi Jin November 2015 1 Copyright ESI Copyright Group, 2015. ESI Group,
More informationCompressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing carbon and silicon carbide fibres
Sudarisman, I. J. Davies, and H. Hamada, Compressive failure of unidirectional hybrid fibre-reinforced epoxy composites containing carbon and silicon carbide fibres, Compos. Part A, 38(3) pp. 1070-1074
More informationCarbon Composites. are becoming Competitive and Cost Effective for Automobile Industry. Automotive Mega Trends USA Dearborn, Michigan, Mar 17, 2015
Carbon Composites are becoming Competitive and Cost Effective for Automobile Industry Automotive Mega Trends USA Dearborn, Michigan, Mar 17, 2015 Shama Rao N., Simha T.G.A., Rao K.P., Ravi Kumar G. V.
More informationHexcel 8552 AS4 Unidirectional Prepreg at 190 gsm & 35% RC Qualification Material Property Data Report
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University CAM-RP-- April 4, Revision N/C Hexcel 855 AS4 Unidirectional Prepreg at 9 gsm & 5% RC Qualification Material Property Data Report FAA Special
More informationComposites. Aerospace Product Selector Guide
Aerospace Product Selector Guide Composites 3 Composites Benzoxazines p. 4 Infusion Structural Resins p. 6 Composites With composites, your aircraft manufacturing gets moving With, it takes flight Mold
More informationThe Effect of Manufacturing Induced Defects on Performance of Composite Laminates
The Effect of Manufacturing Induced Defects on Performance of Composite Laminates Date 27 th February 2013 Presenter Wayne Van Rooyen, Materials Technologist Composites Slides 17 Event SAMPE Seminar, Advanced
More informationCURING OF COMPOSITE MATERIALS USING THE RECENTLY DEVELOPED HEPHAISTOS MICROWAVE M. Kwak 1 *, P. Robinson 2, A. Bismarck 2, R.
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS CURING OF COMPOSITE MATERIALS USING THE RECENTLY DEVELOPED HEPHAISTOS MICROWAVE M. Kwak 1 *, P. Robinson 2, A. Bismarck 2, R. Wise 1 1 Advanced Materials
More informationFE MODELING OF CFRP STRENGTHENED CONCRETE BEAM EXPOSED TO CYCLIC TEMPERATURE, HUMIDITY AND SUSTAINED LOADING
FE MODELING OF STRENGTHENED CONCRETE BEAM EXPOSED TO CYCLIC TEMPERATURE, HUMIDITY AND SUSTAINED LOADING H. R. C. S. Bandara (Email: chinthanasandun@yahoo.com) J. C. P. H. Gamage (Email: kgamage@uom.lk)
More informationQuakeWrap s PileMedic System November 30, 2010
PileMedic for Repair and Strengthening of Columns & Underwater Piles How can we fix these piers in a day while maintaining traffic? Mo Ehsani, Ph.D., P.E., S.E. President, QuakeWrap, Inc., and Professor
More informationMTM49 series of prepregs is based on C ( F) curing toughened epoxy matrix resins designed for the manufacture of components.
ACG MTM 49 SERIES COMPONENT PREPREGS Product Description MTM49 series of prepregs is based on 80-160 C (176-320 F) curing toughened epoxy matrix resins designed for the manufacture of components. The series
More informationEffect of Angle Ply Orientation On Tensile Properties Of Bi Directional Woven Fabric Glass Epoxy Composite Laminate
International Journal of Computational Engineering Research Vol, 03 Issue, 10 Effect of Angle Ply Orientation On Tensile Properties Of Bi Directional Woven Fabric Glass Epoxy Composite Laminate K.Vasantha
More informationExperimental Test on Gfrp-Epoxy Composite Laminate for Mechanical, Chemical & Thermal Properties
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 8, Issue 6 (Sep. - Oct. 2013), PP 47-52 Experimental Test on Gfrp-Epoxy Composite Laminate for Mechanical,
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES FIBERGRATE MOLDED GRATING WITH GRATING PEDESTALS. January 24,
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES FIBERGRATE MOLDED GRATING WITH GRATING PEDESTALS January 24, 2014 06600-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS
More informationHexForce and HexPly Aerospace Selector Guide
HexForce and HexPly Aerospace Selector Guide European version About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of
More informationCOMPOSITES TERMS GLOSSARY
COMPOSITES TERMS GLOSSARY abrasion: The wearing away of a portion of the surface by either natural (rain, wind, etc.), mechanical (misfit, etc.), or manmade (oversanding, etc.) means; penetrates only the
More informationDEVELOPMENT OF THERMOPLASTIC RESIN IMPREGNATED YARN AND ITS COMPOSITE PROPERTIES
DEVELOPMENT OF THERMOPLASTIC RESIN IMPREGNATED YARN AND ITS COMPOSITE PROPERTIES Akio Ohtani 1, Mitsuro Takagi 2, Jun Takashima 3, Kouji Nakajima 4, Takayuki Imai 4, Tadashi Uozumi 1, Asami Nakai 1, Hiroyuki
More informationEffect of Hygrothermal Aging and Circular Notch on Tensile Strenght of Woven Composite Materials Repaired by a Bonded Composite Patch
International Journal of Composite Materials 2015, 5(2): 25-29 DOI: 10.5923/j.cmaterials.20150502.01 Effect of Hygrothermal Aging and Circular Notch on Tensile Strenght of Woven Composite Materials Repaired
More informationENGINEERING SPECIFICATION FIBERTRED MOLDED STAIR TREADS SECTION 06610
ENGINEERING SPECIFICATION FIBERTRED MOLDED STAIR TREADS SECTION 06610 PART 1 - GENERAL 1.1 SCOPE OF WORK FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED STAIR TREADS A. The CONTRACTOR shall furnish,
More informationDesign, Testing, Analysis, and Material Properties of Carbon Fiber Reinforced Polymers
Rose-Hulman Institute of Technology Rose-Hulman Scholar Rose-Hulman Undergraduate Research Publications 5-30-2016 Design, Testing, Analysis, and Material Properties of Carbon Fiber Reinforced Polymers
More informationALTERNATIVE REACTIVE MONOMER CHEMISTRIES IN RESINS FOR PULTRUSION PROCESSING
ALTERNATIVE REACTIVE MONOMER CHEMISTRIES IN RESINS FOR PULTRUSION PROCESSING W. Grant Richmond Deltech Corporation 11911 Scenic Highway Baton Rouge LA. 70807 ABSTRACT Vinyl toluene (VT), under the family
More information