VOUGHT AIRCRAFT INDUSTRIES, INC.

Transcription

1 AIRCRAFT INDUSTRIES, INC. P.O Box Dallas, TX Cage Code VSS SL-0 REV. DATE OF ISSUE: SHEET OF 8 : SUPERSESSION LIST OF HERITAGE STANDARD SPECIFICATIONS TRANSITION FROM This document serves as an index for the Vought Aircraft Industries process specifications, VSS, to be used on Grumman Heritage Programs. This list is meant for reference only and gives the status of the specifications at the time of issue. In this index the document listed in the Superseded Number column is the Grumman specification that has been superseded by the Vought document specified in the Superseding Number column. NOTICE THIS DOCUMENT IS APPLICABLE ONLY TO HERITAGE PROGRAMS. PROGRAMS AFFECTED Astra, Model 25 CFM56 CF34-8D CF6-80C2/E Falcon 50 F0A-5-Actuator F0A-5-, Model AMD F0A-5-2, Model F0A F00 GIV HS25-600/-700/-800 PMNTR-SCHED-92-, Model DC8 PW2037 Rockwell International, Sabreliner 65 TF73-5 Westwind, Model 24

2 GSS4200F GSS4302C GSS4306C GSS4308E GSS430H GSS4407F GSS4504 GSS4507 GSS4509D GSS450F GSS4704C GSS4706C GSS470E GSS47E GSS4800B GSS480A GSS500G Cleaning and Chemical Surface Treatment of Aircraft Surfaces Integral Fuel Tank Coating (MIL-C ), Application of Primer Coating, Epoxy, Preparation and Application of, (Finish Code 202 and 302) Primer Coating, Epoxy Polyamide, Application of Lacquer: Acrylic, MIL-L-8352 (GP0H), Application of Coatings, Epoxy Finish, Application of Coating, Fuel and Oil Resistant, for Polycarbonate Surfaces, Application of Coating, Polyurethane, Application of Tape, Tube Identification - Application of Marking Electro-Etch Process Identification of Fabricated Metallic Parts and Assemblies Identification of Fabricated Nonmetallic Parts and Assemblies Preservation of Ferrous and Non-Ferrous Metal Surfaces Corrosion Preventative Compound, Application of Heat Treatment of Low Alloy Steels VSS 4200 VSS 430 VSS 4306 VSS 4308 VSS 430 VSS 4407 VSS 4504 VSS 4507 VSS 450 VSS 450 VSS 4704 VSS 4706 VSS 470 VSS 47 VSS 4800 VSS 480 VSS 500 2

3 GSS502C GSS503 GSS504B GSS550C GSS5300E GSS530C GSS5360D GSS602D GSS6203, 3 GSS6204B GSS702C GSS703 GSS705E GSS7020D GSS702F GSS7022F Heat Treatment of Wrought Precipitation Hardenable Stainless Steels Heat Treatment of Martensitic Stainless Steel Heat Treatment of Austenitic Corrosion and Heat Resistant Steels Heat Treatment of Titanium and Titanium Forming and Straightening of Aluminum Peening of Ferrous and Non-Ferrous Forming of Titanium and Titanium Resistance Welding of Foil, Mesh and Sheet Fusion Welding of Steels, Corrosion and Heat Resistant Steels and Nickel Base Fusion Welding of Titanium and Titanium Preparation of Surfaces by Abrasive Methods Polishing of Corrosion Resistant Steel Surfaces for Cosmetic Requirements Cleaning and Descaling of Titanium and Titanium Acid Cleaning of Aluminum and Aluminum Acid Cleaning of Ferrous Preparation of Surfaces Prior to Structural Adhesive Bonding VSS 502 VSS 503 VSS 504 VSS 550 VSS 5300 VSS 530 VSS 5360 VSS 602 VSS 6203 VSS 6204 VSS 702 VSS 703 VSS 705 VSS 7020 VSS 702 VSS

4 GSS7025A GSS7030E GSS8052A GSS8056A GSS8060D GSS8250D GSS900C GSS9030B GSS0300C GSS0400 GSS00D GSS0B, 3 GSS02B GSS04B GSS4 6 GSS5G Preparation of Titanium and Titanium Alloy Parts for Organic Coatings Alkaline Cleaning of Ferrous and Non- Ferrous Cadmium Plating (Electro-Deposited), for Ferrous Parts Heat Treated in the Rockwell C-46 to C-49 Range Cadmium Plating, Vacuum Deposited Brush Plating of Ferrous and Non- Ferrous Chromium Plating (Electrodeposited) Solid Dry Film Lubricant (Molybdenum Disulfide); Application of Glass Fiber Base Plastic Laminates for Structural Application (General) Glass Fiber Base, Polyester Resin, Structural Laminates Glass Fiber Base, Epoxy Resin, Structural Laminates Glass Fiber Base, Silicone Resin, Structural Laminates Structural Laminates Graphite Fiber Base, Polyimide Resin (DC-8R Nacelle) Honeycomb Sandwich and Low Pressure Laminate Structures, Graphite/Epoxy Unidirectional Tape and Woven Fabric Prepregs, 350F Cure, Fabrication of VSS 7025 VSS 7030 VSS 8052 VSS 8056 VSS 8060 VSS 8250 MIL-C-554 MIL-A-8625 VSS 0300 MEPS VSS 00 VSS 0 VSS 02 VSS 04 VSS 4 VSS 5 4

5 GSS300D, 3 GSS700D GSS800C GSSS80C GSS804B GSS900C GSS400D GSS40B GSS404A GSS405E GSS4200D, 3, 4 GSS420C, 3 GSS4500D,2,3,4,5 GSS530D Metallic and Non-Metallic Honeycomb Core and Facings for Sandwich Construction Cast Plastic Shims, Requirements for Fabrication of Thermoforming; Acrylonitrile Butadiene Styrene (ABS) Plastic Sheet Modified Acrylic Plastic Panels; Forming of Thermoforming Polycarbonate Plastic Sheet Material Injection Molding of Thermoplastic Resins Sealing; Pressurized Areas, Skin Joints, Faying Surfaces, Access Closures and Coating Exterior Surfaces Application of High Temperature Sealant (Not Fuel and Oil Resistant) Application of Flame Resistant Sealants Sealants, High Temperature, Fuel Resistant, Application of Dielectric Sealing (Potting and Molding) of Electrical Connectors and Components ( 65F to 80F) Dielectric Sealing, (Potting and Molding) of Electrical Connectors and Components for High Temperature (-65F to 500F) Sealing of Surfaces for Aerodynamic Smoothness Installation of High Strength, Threaded, Blind, Mechanical Fasteners (Jo-Bolts or Visu-Lok) VSS 300 VSS 700 VSS 800 VSS 80 VSS 804 VSS 900 VSS 400 VSS 40 VSS 404 VSS 405 VSS 4200 VSS 420 VSS 4500 VSS 530 5

6 GSS5302E GSS5303E GSS5304E GSS5306C GSS5308F GSS535B GSS537 GSS5330C GSS5350C GSS5500C GSS550C GSS5502 GSS600F, 3, 4 GSS60C GSS602B GSS7403C GSS7404B Installation of Solid and Tubular Rivets Installation of Blind Rivets Installation of High Strength, Pull Type, Blind Fasteners Installation of Hi-Lok Type Fasteners Installation of Lockbolts Dimpling, Flush Head Mechanical Fastener Installation of High Strength, Internally Threaded, Blind, Mechanical Fasteners (Composi-Lok IIA) Helical Coil, Screw Threaded Inserts, Installation of Cold Expansion of Holes in Aluminum and Titanium Swaged Pushrods Fabrication of Structural Tubing, Swaging, Reducing and Expanding of Non-Structural Tubing, Swaging, Reducing and Expanding of Ultrasonic Quality Requirements for Aluminum Alloy Products Ultrasonic Inspection of Low Alloy and Stainless Steels Ultrasonic Quality Requirements for Titanium and Titanium Swaging of Tubing to Flanges Swaging of Tubing to Resistoflex Dynatube Fittings VSS 5302 VSS 5303 VSS 5304 VSS 5306 VSS 5308 VSS 535 VSS 537 VSS 5330 VSS 5350 VSS 5500 VSS 550 VSS 5502 VSS 600 VSS 60 VSS 602 VSS 7403 VSS

7 GSS8400 GSS9200B GSS20000D GSS2000A, 3 GSS20200B Cylindrical Grinding of Unplated and Chromium Plated Steel Parts Nital Etching of Low Alloy Steel Parts Structural Adhesive Bonding Structural Adhesive Bonding, FM-47 Adhesive System Structural Adhesive Bonding, FM-6 (GA00DJ/GPAA) Adhesive System VSS 8400 VSS 9200 VSS VSS 2000 VSS GSS20300C, 3, 4 GSS20350C GSS20360, 3 GSS20400A, 3 GSS20450A, 3 GSS20460A GSS2046 GSS20470B GSS2047 GSS20500A GSS22500A Structural Adhesive Bonding FM-58 (GA00Y/GPH) Adhesive System Structural Adhesive Bonding for 67F to 350F Service Temperature Structural Adhesive Bonding, GM4358 Adhesive System Structural Adhesive Bonding, HT-424 Adhesive System Adhesive Bonding of the Panel Assembly, Acoustic Barrel Inlet Adhesive Bonding of Metallic Linear Acoustic Structure (Proprietary) Adhesive Primer, Epoxy, Application of Fabrication and Adhesive Bonding of Acoustic Liners Fabrication and Adhesive Bonding of Acoustic Fan Case Liners Structural Adhesive Bonding, Adhesive System AF-820 Non-Structural Adhesive Bonding Using Epoxy Adhesives VSS VSS VSS VSS VSS VSS VSS 2046 VSS VSS 2047 VSS VSS

8 GSS22600A GSS2260A GSS22650B GSS2600F GSS26300B GSS2700F Non-Structural Adhesive Bonding Using Rubber Cements Non-Structural Bonding Using Elastomeric Silicone Adhesives Adhesive Bonding of Metallics and Non- Metallics, General Purpose Chemical Milling (Caustic Process) of Aluminum Chemical Milling of Titanium and Titanium Insulation Installation, Ducts and Tubes VSS VSS 2260 VSS VSS 2600 VSS VSS