Your partner with ELTEX TUB 220-RT. A unique combination of properties for Hot & Cold applications.
|
|
- Wilfred Curtis
- 5 years ago
- Views:
Transcription
1 Your partner with A unique combination of properties for Hot & Cold applications
2 INEOS METALLOCENE PROPRIETARY TECHNOLOGY INEOS O&P operates its newest metallocene technology at its petrochemical complex in Germany. Thanks to a unique molecular architecture, Eltex TUB 220-RT (PE-RT material) benefits the advantages of a high extrusion processability combined with a differentiated balance of mechanical properties. The carefully optimised physical properties confer unprecedented properties in the PE-RT type II class of applications.
3 A novel class of Polyethylene of Raised Temperature resistance Eltex TUB 220-RT fulfils all the requirements of the newly established EN ISO standard with a PE-RT type II classification. Eltex TUB 220-RT polymer architecture has been tailor made to be well suited for the extrusion of monolayer and multilayer pipes and offers a unique combination of properties between mechanical performance at elevated temperature, pipe flexibility and superior processing behaviour. HOOP STRESS PERFORMANCE OF INEOS internal data Stress MPa 3 2 Color by Temperature Shape by status ductile on-going failure time h
4 key properties PHYSICAL TEST METHODS VALUES UNITS Density ISO kg/m 3 Melt Flow Rate 190 C, 2.16kg ISO 1183 method D 1.2 g/10min MECHANICAL Tensile Strength at Yield 23 C ISO MPa Tensile strength at Break 23 C ISO MPa Elongation at break 23 C ISO >500 % Tensile Modulus 23 C ISO MPa The values given are typical values measured on the product. Data should not be used for specification work. Melt Flow Index (g/10min) Competitive PE-RT II material a Competitive PE-RT II material b Flexibility (Flexural Modulus MPa) Pressure resistance class (acc. to EN ISO 22391)
5 Excellent processing behaviour has been proven at high line speeds (e.g. up to 50 m/min). Eltex TUB 220-RT distinguishes itself by the production of smooth and glossy pipes without the need of costly processing aids. Flexibility is a key requirement for easy pipe installation. Eltex TUB 220-RT ranks the best in the PE-RT type II class reducing the flexibility gap with PE-RT type I materials. HIGH FLEXIBILITY PE-RT type II competitive material b TYPE II resins PE-RT type II competitive material a PE-RT type I competitive material TYPE I resins E-MODULUS (MPa) This mix of properties makes Eltex TUB 220-RT the right choice in a range of applications: underfloor heating, plumbing, radiator connections, industrial applications. Using Eltex TUB 220-RT will enable you to produce innovative Hot & Cold pipes. EXCLUSION OF LIABILITY: The information contained in this brochure, as at the date of publication, is accurate to the best knowledge and belief of INEOS Europe Ltd. and its affiliates («INEOS») and any further information or advice provided by INEOS relating to INEOS or third party materials is also given in good faith. INEOS makes no representations or warranties, express or implied, regarding the completeness, quality or accuracy of this or any other information and any decisions you make based on the information contained in this website or otherwise provided by INEOS, including as to the suitability or fitness of materials for a particular purpose, are your sole responsibility. The information contained in this website is subject to change, and your INEOS representative will be happy to help in providing you with the latest version of this information. Please otherwise note that we advise you regularly check the validity of the information you may have already downloaded from our website. Except as required by mandatory law or as expressly provided in INEOS s standard terms and conditions of sale, INEOS accepts no liability whatsoever arising from the use of information supplied by this website or otherwise, or from the application, adaptation or processing of the products described herein, the use of other materials in lieu of INEOS materials or the use of INEOS materials in conjunction with such other materials. Innovex, Novex, Rigidex, Eltex, Eltex P, Rigidex P, Innovene, INEOS and the breakthrough mark are all trademarks of the INEOS group, used with its permission, and are registered in a number of countries.
6 INEOS is one of the world s largest chemical companies. Founded in 1998, the company employs 15,000 people and has turnover of around 47 billion US Dollars. INEOS Olefins & Polymers Europe is a business leading European producer of olefins and polyolefins. INEOS Olefins & Polymers Europe utilises a full range of high valued polyolefins solutions for selected market applications such as pressure pipes and fittings, sewage and drainage pipes as well as Hot & Cold through dedicated sales, marketing and technical teams focusing on each market segment. As a result of its leading technologies, strong product development capability and willingness to create value as well as long term relationships with customers and end-users, INEOS O&P Europe is committed to serve the current and future needs of the pipe industry. In the field of Hot & Cold applications, plastic pipes offer an alternative to traditional copper pipes with their ease of installation, resistance to corrosion and lightweight properties. Polyethylene materials PEX and PE-RT are leading the growth of this demanding market. PE-RT (Polyethylene of Raised Temperature resistance) materials are the latest generation of the Polyethylene family which offer a superior processing ability, product performance and cost balance compared to other plastic materials. INEOS O&P Europe enjoys an extensive know-how of the Hot & Cold market requirements with a long lasting experience in supplying PEX materials. Adrian Popa Technical Service & Development Leader Construction & Durables t e adrian.popa@ineos.com INEOS Olefins & Polymers Europe, October 2010
Your partner with ELTEX TUB PP. The efficient solution for non pressure drainage and sewerage pipe systems.
Your partner with ELTEX TUB PP The efficient solution for non pressure drainage and sewerage pipe systems www.ineospolyolefins.com ELTEX TUB PP ELTEX TUB PP Eltex TUB PP grades provide the optimal combination
More informationYour partner in HDPE PERFORMANCE PIPES. Leading the. pipe market.
Your partner in HDPE PERFORMANCE PIPES Leading the pipe market www.ineospolyolefins.com Non pressure We offer a natural bimodal HDPE resin with slight stabilization package. This grade with no long term
More informationYour partner in HDPE PERFORMANCE PIPES. Leading the. pipe market.
Your partner in HDPE PERFORMANCE PIPES Leading the pipe market www.ineos.com HDPE PERFORMANCE PIPES HDPE material exhibits a lot of advantages over traditional materials for pressure pipe applications.
More informationClear choice, ADVANCED PACKAGING APPLICATIONS. perfect container
INEOS is one of the world s largest chemical companies. Founded in 1998, the company employs 15,000 people and has turnover of around 47 billion US Dollars. www.ineos.com INEOS Olefins & Polymers Europe
More informationYour partner in PP FILM. Faster, thinner, better with ELTEX P.
Your partner in PP FILM Faster, thinner, better with ELTEX P www.ineospolyolefins.com Our cast and blown Polyolefins resins range We also provide the Flexible Packaging market with a broad and specialized
More informationYour partner in EXTRUSION COATING. Goods that make our life. convenient.
Your partner in EXTRUSION COATING Goods that make our life convenient www.ineos.com EXTRUSION COATING Extrusion Coating Perfectly suited for liquid food packaging, photographic paper, flexible and commercial
More informationYour partner in pharmaceutical BLOW FILL SEAL. Proven Solutions. for medical and pharmaceutical packaging.
Your partner in pharmaceutical BLOW FILL SEAL Proven Solutions for medical and pharmaceutical packaging www.ineos.com BLOW FILL SEAL BLOW FILL SEAL Pharmaceutical applications what Eltex Med provides Product
More informationSERVICES & SOLUTIONS for analysis, processing and testing
Your partner in SERVICES & SOLUTIONS for analysis, processing and testing www.ineos.com ANALYTICAL, PROCESSING AND TESTING Our Experience Knowledgeable people makes the difference 1 INEOS Olefins & Polymers
More informationYour partner in CAPS & CLOSURES. Polyolefins. the material of choice for caps & closures.
Your partner in CAPS & CLOSURES Polyolefins the material of choice for caps & closures www.ineos.com CAPS & CLOSURES Organoleptic resins for beverage caps The consistency of beverages is preserved by using
More informationYour partner for RIGID PACKAGING SOLUTIONS. Clear, clean. and tough.
Your partner for RIGID PACKAGING SOLUTIONS Clear, clean and tough www.ineos.com CONTENT High density polyethylene grades 1 Low density polyethylene grades 6 Polypropylene grades 10 High density polyethylene
More informationImproving the sustainability of thermoformed polyolefin food packaging through UPES interpolymer modification
Improving the sustainability of thermoformed polyolefin food packaging through UPES interpolymer modification Presenter: Dr. Eric Vignola ASTM Committee D10 Workshop on Packaging October 12, 2010 San Antonio,
More informationTOMORROW S INFRASTRUCTURE SOLUTIONS
TOMORROW S INFRASTRUCTURE SOLUTIONS TOMORROW S INFRASTRUCTURE SOLUTIONS Borcoat 3LPE/PP For steel pipe coating PP-R For domestic plumbing PE80 & PE100 For utilities BorECO PP-B For wastewater and stormwater
More informationIntroduction of LG PE-RT Material
Introduction of LG PE-RT Material LUCENE TM SP980 & SP988 PE-RT Characteristics PE-RT : Polyethylene of Raised Temperature Resistance - Excellent Physical & Good Thermal Properties - Ideal for Hot Water
More informationInnovative material science for pipe applications from a global technology leader
Innovative material science for pipe applications from a global technology leader Plastic Pipe Plastics Global Plastics the right choice for pipe Reliable, efficient, and safe piping systems are essential
More informationComposite Production Systems Global Poly Linepipe
Headquarters 25 Bethridge Road Toronto, ON M9W 1M7 Canada Tel: +1 416 743 7111 Canada 3501 54 Avenue Southeast Calgary, AB T2C 0A9 Canada Tel: +1 403 503 0548 shawcor.com Shawcor Ltd. is a global energy
More informationHostalen PP XN Series Pipe
Hostalen PP XN Series Pipe Leading the way Insert Image Here lyb.com Leadership in Technology and Innovation An innovator and leader in the production of resins used in piping systems, LyondellBasell and
More informationPolypropylene (PP-R) for pipes and fittings in hot and cold water systems
Polypropylene (PP-R) for pipes and fittings in hot and cold water systems MEMBER OF Polypropylene (PP-R) for pipes and fittings in hot and cold water systems Borouge is a joint venture between the Abu
More informationDryflex TPV. Thermoplastic Vulcanisate Compounds
Dryflex TPV Thermoplastic Vulcanisate Compounds CONTENTS INTRODUCTION SERIES OVERVIEW PRODUCT TESTING & PERFORMANCE What is TPV? Compression Set Behaviour TPV or TPS? GRADE TABLES Influence of Oil Dryflex
More informationYour partner with. Metallocene Eltex PF. Thinner, faster and better.
Your partner with Metallocene Eltex PF Thinner, faster and better. www.ineos.com Metallocene Eltex PF INEOS Metallocene product family A unique technology for distinctive products INEOS developments have
More informationTHE NEXLENE TM ADVANCED TECHNOLOGY PLATFORM
THE NEXLENE TM ADVANCED TECHNOLOGY PLATFORM International Polyolefins Conferences 2017 Contents 1) Market opportunity for mpe, including POP and POE 2) Introduction to SABIC SK Nexlene Company 3) Introduction
More informationH112PC AN INNOVATION BEYOND PE100
H112PC AN INNOVATION BEYOND PE100 ABOUT EL-Lene TM H112PC Nowadays polyethylene pipe has been used beyond performance boundaries, ranging from severe environment to replacement of other materials in some
More informationDryflex CS. TPEs with optimised compression set
Dryflex CS TPEs with optimised compression set CONTENTS INTRODUCTION KEY PROPERTIES GRADE TABLE PROCESSING - EXTRUSION PROCESSING - INJECTION MOULDING PROCESSING CONTACT US INTRODUCTION Dryflex CS is a
More informationINTERNATIONAL STANDARD ISO 4427-2 First edition 2007-08-01 Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes Systèmes de canalisations en plastique Tubes et raccords
More informationSilox* 23. Technical Data Sheet. Silox* 23
Technical Data Sheet Silox* 23 Silox* 23 Description Silox 23 silane is a liquid additive that is an excellent candidate to consider for crosslinking high- and medium-density polyethylene (PEXb) for use
More informationARM Fall Conference 2015, Denver CO
Third-Generation Tank Grade ARM Fall Conference 2015, Denver CO Henry Hay and Céline Bellehumeur, NOVA Chemicals November 2015 1 Contents Tank Resin History Tank Resin Requirements Resin Design and Characteristics
More informationembrace the future NONYLPHENOL-FREE DROP-IN LIQUID SOLUTION 20% HIGHER PHOSPHORUS CONTENT BROAD GLOBAL FOOD CONTACT APPROVAL
embrace the future NONYLPHENOL-FREE Fulfills food brand owners demand for a nonylphenolfree alternative antioxidant. DROP-IN LIQUID SOLUTION Handles and feeds like TNPP with accurate liquid feeding and
More informationSolutions for Pipe and Fitting Applications. Summary Data Sheet
Solutions for Pipe and Fitting Applications Summary Data Sheet Polyethylene pipe solutions BorSafe Tailor made PE pressure pipe products from our proprietary bimodal process PE-X One stop shop for experience
More informationOctober 21, 2014 Hot melt adhesives using new metallocene propylene performance polymers
October 21, 2014 Hot melt adhesives using new metallocene propylene performance polymers This presentation includes forward-looking statements. Actual future conditions (including economic conditions,
More informationIntroduction. Mechanical Characteristics of PEX.
Introduction C o n c e p t P i p i n g S y s t e m s Industries (formally Gulf Dura Industries) is committed to continuously develop & maintain the manufacture & supply of world class construction materials,
More informationAPPLICATION Additive in polypropylene-compatible systems. TYPICAL PROPERTIES DESCRIPTION
Product Information Plastics DOW CORNING MB5 2 Masterbatch FEATURES Imparts processing improvements and modified surface characteristics BENEFITS Improved throughput Reduced energy consumption Enhanced
More informationPLAZCAST-LED CAST ACRYLIC (PMMA) SHEETS FOR LED LIGHTING SOLID SHEETS YOUR LOCAL STRATEGIC PARTNER
CAST ACRYLIC (PMMA) SHEETS FOR LED LIGHTING SOLID SHEETS YOUR LOCAL STRATEGIC PARTNER TECHNICAL PROPERTIES sheets feature the same advantageous qualities that standard Plazit-Polygal PLAZCAST sheets: Beautiful
More informationSTRENGTH+ High Modulus Carbon Fiber Reinforced LNP. High performance compounds for structural healthcare applications
STRENGTH+ Stiffness High Modulus Carbon Fiber Reinforced LNP THERMOCOMP and LUBRICOMP Compounds High performance compounds for structural healthcare applications SABIC Founded in 1976, SABIC is today the
More informationGUR 4120 PE-UHMW Unfilled
Description GUR 4120 UHMW-PE is a linear polyolefin resin in powder form with a molecular weight of approximately 5.0 MM g.mol calculated using Margolies equation. The extremely high molecular weight of
More informationWidely accepted for use in polyethylene film applications that involve food contact see Food Contact Acceptability section.
Technical Data Sheet Silquest* PA-1 Silquest* PA-1 Description Silquest PA-1 organosilicone is an additive acceptable at trace level for food contact; it is used to enhance the extrudability of high-viscosity
More information2-part epoxy impregnation resin
Product Data Sheet Edition 21/05/2015 Identification no: 020206040010000006 2-part epoxy impregnation resin Product Description is a two part, epoxy based impregnating resin. Uses Impregnating resin for
More informationISO INTERNATIONAL STANDARD. Polyethylene of raised temperature resistance (PE-RT) pipes Effect of time and temperature on the expected strength
INTERNATIONAL STANDARD ISO 24033 Second edition 2009-01-15 Polyethylene of raised temperature resistance (PE-RT) pipes Effect of time and temperature on the expected strength Tubes en polyéthylène de meilleure
More informationmore freedom KetaSpire PEEK /
more freedom KetaSpire PEEK / AvaSpire modified PEEK MORE PLASTICS WITH MORE PERFORMANCE KetaSpire PEEK is produced using nucleophilic displacement chemistry starting with hydroquinone and 4,4 -difluorobenzophenone.
More informationHDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
More informationSuccessful in the Past Prepared for the Future
Successful in the Past Prepared for the Future A Review of the Performance of Polybutylene Pressure Piping Systems in meeting the needs of sustainable building regulations An Introduction to Polybutylene
More informationHDPE anti-corrosion pipe coating system with outstanding performance
HDPE anti-corrosion pipe coating system with outstanding performance www.bhrgroup.co.uk 18th International Conference on PIPELINE PROTECTION Antwerp, Belgium November 4-6, 2009 Who we are First French
More informationENTEC POLYMERS 1900 Summit Tower Blvd., Suite 900 Orlando, FL P: EntecPolymers.com
POLYETHYLENE 101 1/22/2019 The information presented in this document was assembled from literature of the resin product producer(s). The information is believed to be accurate however Entec Polymers (
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationMediprene 500M. Transparent TPE Series
Mediprene 500M Transparent TPE Series CONTENTS INTRODUCTION KEY PROPERTIES RAW MATERIAL SELECTION TYPICAL APPLICATIONS COLOURED & TRANSPARENT COMPOUNDS GRADE TABLE PROCESSING CONTACTS INTRODUCTION The
More informationAraldite LY 5052 Resin / Aradur 5052 Hardener
Araldite LY 5052 Resin / Aradur 5052 Hardener Product Description Araldite LY 5052 is a low-viscosity epoxy resin that is used with Aradur 5052, a mixture of polyamines, to form a cold curing epoxy system.
More informationPOLYMER ADDITIVES ADDITIVES FOR POLYAMIDES
POLYMER ADDITIVES ADDITIVES FOR POLYAMIDES PRODUCT INNOVATIONS TARGETED TO CUSTOMER DEMANDS BrüggemannChemical continuously develops speciality additives in response to the requirements of the market.
More informationPEarlene* SiPP MB05. Technical Data Sheet
Technical Data Sheet PEarlene* SiPP MB05 Description PEarlene silicone gum containing masterbatches provide improved processability (extrusion rate, mold fill and power consumption) and performance (mar
More informationAutoclave Sterilizable Biocompatible Ductile E-beam Sterilizable
Technical Data Sheet KetaSpire KT-880 KetaSpire KT-880 is a high flow grade of unreinforced (PEEK) supplied in pellet form. KetaSpire PEEK is produced to the highest industry standards and is characterized
More informationCrosslinked Polyethylene (PEX) Pipe & Tubing TN-17/2013
Crosslinked Polyethylene (PEX) Pipe & Tubing TN-17/2013 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org Foreword This report was developed and published
More information3LPO coating systems for corrosion protection of steel pipelines for oil, gas, petrochemicals and water
3LPO coating systems for corrosion protection of steel pipelines for oil, gas, petrochemicals and water Save Resources and Protect the Environment Oil, gas, petrochemicals and water are the lifelines of
More informationHDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
More informationQUALITY MOBILIZES. High-tech polyamides for blow-molded parts
QUALITY MOBILIZES. High-tech polyamides for blow-molded parts MATERIALS AND KNOW-HOW HAND IN HAND APPLICATIONS IN AUTOMOTIVE ENGINEERING LANXESS high-tech polyamides have been synonymous with quality,
More informationFlexible Polymers _ Wire & Cable Grades Lucofin 7410HFFR and Lucofin 7440HFFR
Flexible Polymers _ Wire & able Grades Lucofin 7410FF and Lucofin 7440FF LUOBIT FF Wire & able compounds based on ethylene butyl acrylate _ General alogen Free Flame etardant (FF) compounds are a relatively
More informationXIAMETER brand Sealants
XIAMETER brand Sealants Product Technical Data/Selection Guide (for Asia) When you re looking for a reliable silicone or polymer that will help you stay cost-competitive, XIAMETER brand is the way to go.
More informationSABIC SETS COURSE FOR PROGRESS IN PIPES
TECHNICAL ARTICLE SABIC SETS COURSE FOR PROGRESS IN PIPES As the global need for improved pipe systems across infrastructure, industry, agriculture and households continues to grow, SABIC is putting increasing
More informationProperty Unit Typical Value Test Method Density gm / cm ASTM-D-792 Melt Flow Index (190 C, 2.16
KALPENA INDUSTRIES LIMITED An ISO 9001:2008 company TECHNICAL DATA Kablo Sanayi ve Dış Ticaret Ltd. Şti Ambient Curable Polyethylene Compound For Insulation Of Low Voltage Power Cable With High Line Speed
More informationMold Design Guide. Geon Vinyl Molding Compounds
Mold Design Guide Geon Vinyl Molding Compounds Mold Design Guide For Geon Vinyl Rigid Molding Compounds Table of Contents INTRODUCTION....................................................2 MATERIAL SELECTION.............................................3
More informationMASTERBATCHES. Masterbatch Application and Selection Guide for Irrigation Pipes
MASTERBATCHES Masterbatch Application and Selection Guide for Irrigation Pipes Table of contents Page Nr Introduction 2 Definitions 3 Key Performance Requirements of Irrigation Pipes 3 Drip Irrigation
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationLow viscosity, unfilled epoxy casting resin system, curing at room temperature. High filler addition possibility. Casting; vacuum casting.
Advanced Materials Araldite DBF 100 pbw Aradur HY 956 EN 20 pbw Low viscosity, unfilled epoxy casting resin system, curing at room temperature. High filler addition possibility. Application Encapsulating
More informationThe Performance of L-MODU TM for HMA Base Polymer Use
The Performance of L-MODU TM for HMA Base Polymer Use May. 217 Idemitsu Kosan Co.,Ltd. Performance Materials Laboratories Petrochemical Business Department 175-2 1 1.Introduction of L-MODU TM (1)New Polyolefin
More informationSole carrier with universal application Licocene for
Sole carrier with universal application Licocene for MASTERBATCH Made to fulfill your requirements Licocene PP 1302 Licocene PP 1502 Licocene PP 2602 Licocene PP 3602 TP* Licocene PP 6102 Clariant s high-performance
More informationRoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data polyaryletherketone AvaSpire AV-621 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance
More informationTECHNICAL DATA SHEET. Araldite CY Resin. Advanced Materials
Advanced Materials TECHNICAL DATA SHEET Araldite CY 179-1 Resin GENERAL Liquid cycloaliphatic epoxy resin Araldite CY 179-1 Resin is a very low viscosity resin, which offers high temperature performance,
More informationAdvanced Materials. Arathane XW pbw Arathane HY pbw
Advanced Materials Arathane XW 949-1 100 pbw Arathane HY 5610 50 pbw Polyurethane, halogen free, unfilled casting system for processing and curing at room temperature. Flexible polyurethane system for
More informationSupertough 32ST05S01 Innovative Technology Polyethylene Blown Film Grade
Supertough 32ST05S01 Innovative Technology Polyethylene Blown Film Grade Sankt Augustin Germany July 11-12 th, 2012 B. Riquet F. Fant OUTLOOK 1. Presentation of Total with accent on Polyolefins 2. New
More informationRev. Jan 2018 valid until next revision
AUTOMOTIVE Disclaimer: - The applications specified for reference only. - It is customer s responsibilities to inspect and test the product for suitability of the customer s own use and purpose. The customer
More informationCI/SfB 53/In6 June Environmental and Performance Characteristics of Polybutylene Pipe
CI/SfB 53/In6 June 2005 Environmental and Performance Characteristics of Polybutylene Pipe PIPE USAGE Polybutylene pipe is widely used for heating and plumbing applications in domestic, commercial and
More informationLUCITE DIAKON FROST. The textured surface to provides a matt, non-glossy effect giving a cool, soft look and feel with excellent scratch resistance.
key benefits Frost is an acrylic polymer primarily designed for sheet, profile and tube extrusion where a textured surface and unique diffusing properties are key requirements. This makes Lucite Diakon
More informationMAKING THE PIPE OF THE FUTURE. Pipes and Fittings
MAKING THE PIPE OF THE FUTURE Pipes and Fittings Engineering solutions Certified for more than 30 years with the Standard ISO 9001. PROFILE 2018 GROUPPIPE 2 Profile GROUPPIPE The best solutions in plastic
More informationAqueous polyurethane dispersion. Hazy low viscosity liquid
Type Form supplied Aqueous polyurethane dispersion Hazy low viscosity liquid Uses INCI-Name Polyurethane 48 Suitable for any kind of hair styling product. Specially recommended for aerosol spray formulations.
More informationAWA International Sleeve & Label Conference Chicago, IL (updated 2017)
COC Enhanced Polyolefin Films for Shrink Sleeves and Labels AWA International Sleeve & Label Conference 2010 Chicago, IL (updated 2017) Randy Jester, Market Development Packaging and Film Inc. TOPAS Cyclic
More informationKraton polymers boost functional life of thermoplastic road marking paints
Kraton polymers boost functional life of thermoplastic road marking paints Outline Why modify with thermoplastic road marking paints? Other requirements from the market Kraton polymers introduction Improved
More informationDuPont Engineering Polymers for High Performance Extrusion Solutions. October, 2005
DuPont Engineering Polymers for High Performance Extrusion Solutions October, 2005 2 Legal Disclaimer The information and suggestions provided in this presentation are based on data believed to be reliable,
More informationElongation at break 0.7%
Advanced Materials Araldite 2014 Structural Adhesive Structural Adhesives Araldite 2014 Two component epoxy paste adhesive Key properties Grey paste High temperature and chemical resistance Low shrinkage
More informationCelcon acetal copolymer Short Term Properties Brochure
CE-4 Celcon acetal copolymer Short Term Properties Brochure acetal copolymer Celcon acetal copolymer Grade Characteristics M25 High melt strength for extrusion, high molecular weight for maximum toughness
More informationAraldite 2014 Structural Adhesive
Advanced Materials Araldite 2014 Structural Adhesive Structural Adhesives Araldite 2014 Two component epoxy paste adhesive Key properties Grey paste High temperature and chemical resistance Low shrinkage
More informationBATTERY CAS E A ND COVE R
BATTERY CAS E A ND COVE R IN T RO DU CTI O N Chemicals Business, SCG is one of the largest integrated petrochemical companies in Thailand and a key industry leader in Asia. We offer a full array of petrochemical
More informationDERAKANE MOMENTUM 510 C-350 Epoxy Vinyl Ester Resin
Document 1200 V1 F2, Language EN V1, Approved 2008-9-9, 2009 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 510 C-350 is a brominated epoxy vinyl ester resin that offers a high degree of fire retardance while
More informationRIMLINE SK Polyol
RIMLINE SK 97018 Polyol Pultrusion Polyol Blend CHEMICAL TYPE Formulated Polyol Blend APPLICATIONS Composites Pultrusion Processing DESCRIPTION RIMLINE SK 97018 is a fully formulated, low viscosity polyol
More informationDryflex SE. Standard TPE range, optimised for injection moulding
Dryflex SE Standard TPE range, optimised for injection moulding CONTENTS INTRODUCTION KEY PROPERTIES DRYFLEX SE : UNFILLED SERIES DRYFLEX SE : FILLED SERIES DRYFLEX SE : SEMI-FILLED SERIES PROCESSING APPLICATIONS
More informationAraldite LY 1568 Aradur 3489 / Aradur 3492
Advanced Materials / STRUCTURAL COMPOSITES Provisional Technical Data Sheet APPLICATIONS Industrial composites PROPERTIES Laminating system with low viscosity and high flexibility. The reactivity of this
More informationMarlex Polyethylene Resins
Marlex Polyethylene Resins Disclaimer Technical Advice - Any technical advice, recommendations, results, or analysis ("Information") contained herein, including, without limitation, Information as it may
More informationEXTRUSION LINES FOR PRODUCTION OF PIPES
EXTRUSION LINES FOR PRODUCTION OF PIPES Extrusion lines for pipes DESIGN Bausano designs and implements complete lines based on twin screw extruder technology of MD Plus family, suitable for production
More informationSilane Crosslinking of Low Voltage Wire and Cable Applications of ENGAGE ENR / LLDPE Blend
Silane Crosslinking of Low Voltage Wire and Cable Applications of ENGAGE ENR 7256.00 / Blend ENGAGE Polyolefin Elastomers Introduction One process option of Silane crosslinking of a polyolefin involves
More informationSikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.
Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin
More informationDuPont Delrin 100ST NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationUltramid Balance Specialty plastics based on PA 610
Balance Balance Specialty plastics based on PA 610 BASF supplies polyamide 610 for processing by injection molding under the trade name Balance which is produced by polycondensation of hexamethylene diamine
More informationLarge plastic pipe technology. Large diameter pressure pipe. up to DN/ID 5000 mm
Large plastic pipe technology Large diameter pressure pipe up to DN/ID 5000 mm Powerful and designed according to YOUR specifications Large diameter pressure pipes No sagging and less wallthickness saves
More informationStainless Steel - St St Introduction
Stainless steel is not a single material but the name for a family of corrosion resistant steels. Like many scientific discoveries the origins of stainless steel lies in a serendipitous accident. In 1913
More informationDuPont Zytel HTN51G50HSL BK083 (Preliminary Data)
PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,
More informationThe drinking water tube with internal tin plating
COPATIN The drinking water tube with internal tin plating KME Germany GmbH & Co. KG COPATIN [GB] Contents COPATIN the internally tin-plated drinking water tube 1 KME 2 Applications 4 Benefits 5 Availability
More informationSANGIR PLASTICS P. LTD
SANGIR PLASTICS P LTD Polyethylene for Dredging Applications Corp Off: Sangir House, 366/2933, Motilal Nagar No 2, Mumbai 400090, India T: +91-22-28724023/6120 Website: wwwsangirin ; wwwpvdfin sangir@vsnlcom;
More informationCIMENT FONDU. Special cement for concrete and mortar solutions
Special cement for concrete and mortar solutions >> Rapid return to service Rapid hardening: more than 25 MPa in 6 hours Ciment Fondu mortars and concretes are very rapid hardening, with a setting time
More informationEntering a new market. Polyolefins for pharmaceutical packaging and medical devices
Entering a new market Polyolefins for pharmaceutical packaging and medical devices New A new step forward polyolefins for pharmaceutical packaging and medical devices Our strengths will allow us to become
More informationWhy are BorECO polypropylene materials the best for your sewage and drainage pipes?
Why are BorECO polypropylene materials the best for your sewage and drainage pipes? MEMBER OF 10 good reasons for choosing BorECO polypropylene for sewage and drainage systems compared to other materials
More informationARALDITE 420 A/B Two component epoxy adhesive system
Advanced Materials Araldite 420 A/B Structural Adhesives ARALDITE 420 A/B Two component epoxy adhesive system Key properties Very high lap shear and peel strength Bonds a wide variety of materials (metal,
More information