Engineering Specifications February, 2004 Schedule H to Bylaw 7452, Subdivision Bylaw Page 105 ELECTRICAL DETAILS. base. base. base.

General Symbols, Ducts and Cables

DIVISION 2000 ABBREVIATIONS 2009 11 2000.001 0 Abbreviations, General 2009 11 2011.101 0 General Symbols, Ducts and Cables 2009 11 2011.201 0 General Symbols, Maintenance Holes, Junction Boxes, Pads, and

General Symbols, Ducts and Cables

MUNICIPAL AND COMMON DIVISION 2000 ABBREVIATIONS 2009 11 2000.001 0 Abbreviations, General 2009 11 2011.101 0 General Symbols, Ducts and Cables 2009 11 2011.201 0 General Symbols, Maintenance Holes, Junction

General Symbols, Ducts and Cables

DIVISION 2000 - ABBREVIATIONS 2009 11 2000.001 0 Abbreviations, General 2009 11 2011.101 0 General Symbols, Ducts and Cables 2009 11 2011.201 0 General Symbols, Maintenance Holes, Junction Boxes, Pads,

1/5/2018 WHAT S NEW SINCE B & B QUALIFICATION OF WORKERS. What's New Since SPEC BOOK 2018 SPEC BOOK 2018 SPEC BOOK

CHAPTER 2 STANDARD SPECIFICATIONS AND SPECIAL PROVISIONS 2545.1B & 2565.1B QUALIFICATION OF WORKERS The provisions of 1802 are hereby supplemented with the following: Signal and Lighting Certification:

12/21/2018 WHAT S NEW SINCE What's New Since SPEC BOOK 2018 SPEC BOOK 2018 SPEC BOOK WHAT S NEW SINCE 2014

CHAPTER 2 STANDARD SPECIFICATIONS AND SPECIAL PROVISIONS 2545.1B & 2565.1B QUALIFICATION OF WORKERS The provisions of 1802 are hereby supplemented with the following: Signal and Lighting Certification:

CHAPTER 13 GROUNDING AND BONDING

GROUNDING AND BONDING CHAPTER 13 GROUNDING AND BONDING Grounding and bonding must be in accordance with Article 250 of the National Electrical Code (NEC). Bonding is defined in the NEC as the permanent

SECTION 1101 TRAFFIC SIGNALS AND APPURTENANCES END OF SECTION

SECTION 1101 SIGNALS AND APPURTENANCES PART 1 GENERAL 1.4 SUBMITTALS E. Submit warranty for all supplied material and workmanship for a period of two years from final acceptance. The warranty must state

STREET LIGHTING GENERAL INFORMATION

SECTION 1102 STREET LIGHTING GENERAL INFORMATION These specifications are for street lighting that is to be dedicated to the public and maintained by the City of Meridian. Such installations require a

SECTION 10 - ROADWAY LIGHTING AND TRAFFIC SIGNALS CONTENTS

CONTENTS DESIGN CRITERIA SECTION NO. Roadway Lighting 10.01 Traffic Signals 10.02 Conduit 10.03 Junction Boxes 10.04 Conductors 10.05 Service Equipment 10.06 Concrete Bases 10.07 -Not Used- 10.08 SPECIFICATIONS

OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA

106-5(a-f) 09 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA These Special Provisions amend, revise, and where in conflict, supersede applicable sections of the 2009 Standard

DIVISION 1100 TRAFFIC

SECTION 1102 STREET LIGHTING GENERAL INFORMATION The Idaho State Electrical Board has determined that all street lights are to be provided with an external fuse disconnect, in a junction box between the

ENGINEERS ESTIMATE MARYLAND STATE HIGHWAY ADMINISTRATION

ENGINEERS ESTIMATE The Engineer s Estimate is an important part of the overall design process. It is a determination of the construction costs for any given project. The estimate is then used for programming

UNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2015 REVISIONS

, NEVADA YEAR 2015 REVISIONS SECTION TITLE AND REVISIONS SUMMARY EFFECTIVE DATE 217.S2 "Residential Curb and Gutter, R-Type" - New drawing to accommodate ADA requirements. 223 "Residential Driveway" -

SPECIAL SPECIFICATION 1924 Neighborhood Friendly High Mast Illumination System

1993 Specifications CSJ 2374-01-154 SPECIAL SPECIFICATION 1924 Neighborhood Friendly High Mast Illumination System 1. Description. This Item shall govern for furnishing and installing the various types

RESIDENTIAL QUICK REFERENCE

RESIDENTIAL QUICK REFERENCE PROVO CITY POWER STANDARDS ELECTRICAL ENGINEERING UPDATED: 2016 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION. 18" MIN. OF TAIL. (NEUTRAL CONDUCTOR MUST BE WHITE OR

SPECIAL SPECIFICATION 8710 Decorative Pole Lighting Assembly

2004 Specifications CSJ 0902-48-682, 0902-48-825 & 0902-48-826 SPECIAL SPECIFICATION 8710 Decorative Lighting Assembly 1. Description. Furnish and install a Decorative Lighting Assembly (Type A) as shown

ROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING

ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity

5-1 Street Lights Required Street Lights on Private Roadways Developer s Responsibility...5-1

SECTION 5 STREET LIGHTING CONTENTS Page 5-1 Street Lights Required...5-1 5-2 Street Lights on Private Roadways...5-1 5-3 Developer s Responsibility...5-1 5-4 Utility Company Authorization...5-1 5-5 General

MATERIAL SPECIFICATION FOR STEEL POLES, BASE MOUNTED

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 2423 APRIL 2017 MATERIAL SPECIFICATION FOR STEEL POLES, BASE MOUNTED TABLE OF CONTENTS 2423.01 SCOPE 2423.02 REFERENCES 2423.03 DEFINITIONS -

ISSUE DATE JANUARY 1st, 2008 SECTION 5G FIBERGLASS PACKAGE LIFT STATION

ISSUE DATE JANUARY 1st, 2008 SECTION 5G FIBERGLASS PACKAGE LIFT STATION FIBERGLASS PACKAGE LS SITE PLAN PAGE No. 111 NUMBER: FG-LS-SITE-PLN FIBERGLASS PACKAGE LS PIPING PLAN PAGE No. 112 NUMBER: FG-LS-PIPE-PLN

Cutouts and Fuse Links Equipment to protect against faults and over-current conditions on power distribution systems. Open-Type Cutouts Linkbreak Cutouts Loadbreak Cutouts Cutout-Arrester Combinations

City of Redding Construction Standards Index

City of Redding Construction Standards Index A. Purpose and Reference Documents... A1 B. Modifications to the Standard Specifications for Public Works Construction (Greenbook)... B1 I. Streets Materials...

Section 820. TRAFFIC SIGNALS

820.02 Section 820. TRAFFIC SIGNALS 820.01. Description. This work consists of providing required components to complete the following: A. Provide complete, operating traffic and pedestrian signals, span

Item 442 Metal for Structures

Item 442 Metal for Structures 1. DESCRIPTION 2. MATERIALS Provide structural steel, high-strength bolts, forgings, steel castings, iron castings, wrought iron, steel pipe and tubing, aluminum castings

Duke Energy Carolinas Distribution Construction Standards Reference Guide

Duke Energy Carolinas Distribution Construction Standards Reference Guide The Duke Energy Carolinas (DEC) Distribution Construction Standards are available on the My Duke Energy Contractor Portal. Access

PART 7 COMMUNICATIONS, LIGHTING, TRAFFIC CONTROL, POWER

PART 7 COMMUNICATIONS, LIGHTING, TRAFFIC CONTROL, POWER COMMUNICATIONS LIGHTING Street Lighting Plan 710 Riser... 287 730 Collar for street light pole... 289 731 Pull box... 291 732 Trench for street light

Delivering Reliability. Electrical Vaults. Power & Energy-Underground Structures

A Delivering Reliability Electrical Vaults Power & Energy-Underground Structures A The Benefits of Precast Vaults Electrical vaults house power cables and transformers, and are a preferred alternative

CITY OF ROCKLIN STANDARD DRAWINGS

CITY OF ROCKLIN STANDARD DRAWINGS November 2016 Table of Contents Page # Section 1 Section 2 Section 3 General Notes and Review Boxes 01-01 Signature Blocks... 1 01-02 General Notes (Sheet 1 of 8)... 2

2008 Interim Standard Sheet List For Use with the 2008 Imperial Road and Bridge Standards July, 2015

2008 Interim Standard Sheet List For Use with the 2008 Imperial Road and Bridge Standards July, 2015 The following is a complete list of special design IMPERIAL interim standard sheets that will be used

TABLE OF DRAWINGS. Pierce County Public Works & Utilities

Section A Concrete and Asphalt Concrete Pavement and Roadway Sections PC.A1.1 Arterial with Cement Concrete Traffic Curb and Gutter and Sidewalk, Closed Drainage 05/10/2018 PC.A1.2 Arterial with Cement

Draft. Not yet Approved

2016 Part 3.2.5 Recommended Design Criteria and Functional/Operating Guidelines for Overhead Bridge and Cantilever Structures and Placement of Grade Crossing Warning Devices Revised 2017 (8 Pages) A. Purpose

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4. 6.2 OVERHEAD SERVICES Wiring of any premises for connection

STANDARD DRAWINGS. September 2013 UPDATED FEBRUARY 2016

STANDARD DRAWINGS September 2013 UPDATED FEBRUARY 2016 CONSTRUCTION STANDARD DRAWINGS DIVISION 15 LIST OF DRAWINGS: 1. 01 2004-1 Rev. A - Concrete Standards General Outline and Reinforcement Notes 2. 01

TABLE OF DRAWINGS. Pierce County Public Works & Utilities

Section A Concrete and Asphalt Concrete Pavement and Roadway Sections PC.A1.1 Arterial with Cement Concrete Traffic Curb and Gutter and Sidewalk, Closed Drainage 04/01/2019 PC.A1.2 Arterial with Cement

Ontario Ministry of Transportation. Designated Sources of Material (DSM) Index

2 GRADING 2.35 Fill 2.35.30 Lightweight Fill Material 3 PAVEMENTS 3.05 Asphalt 3.05.10 Anti-Stripping Treatments (formerly Anti-stripping Additives) 3.05.22 Asphalt Cement, Performance Graded (PGAC) 3.05.25

STREET LIGHTING. Springville City Power standard street lights will be installed in accordance with Springville City Power's Line Extension Policy.

General The following general requirements shall apply to street lights installed in new underground residential subdivisions or developments located within the service area of Springville City Power (within

GENERAL NOTES PEDERNALES ELECTRIC COOPERATIVE, INC. RESIDENTIAL AND COMMERCIAL AMP METER LOOP SPECIFICATIONS

GENERAL NOTES 1. Residential and commercial meter loops are typically used when constructing facilities for permanent service. It is important that all guidelines outlined in this document be followed

AREMA C&S Manual 2018 (Includes 2018 Revisions) Volume 4 Index SECTION 14 - ELECTRICAL DEVICES, FOUNDATIONS, HARDWARE

SECTION 14 - ELECTRICAL DEVICES, FOUNDATIONS, HARDWARE 14.1 Recommended Wire Connectors, Terminals 14.1.1 37-2 Recommended Design Criteria and Functional/Operating Guidelines for Solderless Crimp-Type

2008 Interim Standard Sheet List For Use With The 2008 Imperial Road and Bridge Standards October, 2014

2008 Interim Standard Sheet List For Use With The 2008 Imperial Road and Bridge Standards October, 2014 The following is a complete list of special design IMPERIAL interim standard sheets that will be

Tacoma Mall Office Building 4301 South Pine Street, Suite 446 Tacoma, Washington (253) Fax (253)

Tacoma Mall Office Building 4301 South Pine Street, Suite 446 Tacoma, Washington 98409-7207 (253) 798-7250 Fax (253) 798-4233 www.piercecountywa.org/roadstandards March 2012 Comment Form Date: To: From:

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4. 6.2 OVERHEAD SERVICES Wiring of any premises for connection

SECTION EXTERIOR ATHLETIC LIGHTING

PART 1 GENERAL 1.1 SECTION INCLUDES A. Sports luminaries and accessories B. Poles 1.2 REFERENCES SECTION 26 58 68 EXTERIOR ATHLETIC LIGHTING A. ANSI C78.379 - Classification of Beam Patterns of Reflector

Via Internet Posting 14 pages

Michael Pacholok Director Purchasing and Materials Management Division City Hall, 18 th Floor, West Tower 100 Queen Street West Toronto, Ontario M5H 2N2 Joanne Kehoe Manager Construction Services March

EFFECTIVE DATE: November 1, 2011, unless a later date is cited at the end of a section. [ NMAC - Rp,

TITLE 14 CHAPTER 10 PART 4 HOUSING AND CONSTRUCTION ELECTRICAL CODES 2011 NEW MEXICO ELECTRICAL CODE 14.10.4.1 ISSUING AGENCY: The Construction Industries Division of the Regulation and Licensing Department.

HALIFAX REGIONAL MUNICIPALITY MUNICIPAL DESIGN GUIDELINES

HALIFAX REGIONAL MUNICIPALITY MUNICIPAL DESIGN GUIDELINES 2013 PART B STANDARD DETAILS Municipal Design Guidelines Contents PART B: STANDARD DETAILS Municipal Roads/Streets HRM 1 HRM 2 HRM 3 HRM 4 HRM

SUPPLEMENTAL DRAWINGS

CITY OF GREATER SUDBURY SUPPLEMENTAL DRAWINGS TO THE ONTARIO PROVINCIAL STANDARD DRAWINGS Rev: February 2012 CITY OF GREATER SUDBURY STANDARD DRAWINGS TABLE OF CONTENTS Greater Sudbury Standard Drawings

SUBJECT: Signal and Lighting Standard Plates , 8112, 8120, 8126, 8127, 8128, and 8134

MINNESOTA DEVELOPED BY: Design Standards ISSUED BY: Office of Project Management and Technical Support, Design Support Section TRANSMITTAL LETTER (5-0) MANUAL: Standard Plates DATED: July, 05 SUBJECT:

PLANNING GUIDE FOR SINGLE CUSTOMER SUBSTATIONS SERVED FROM TRANSMISSION LINES

Prepared by: NIB/EOB PLANNING GUIDE FOR SINGLE CUSTOMER SUBSTATIONS SERVED FROM TRANSMISSION LINES 05503 Department: Electric T&D Section: T&D Engineering and Technical Support Approved by: G.O. Duru (GOD)

SECTION ELECTRIC FOUR FOLD DOORS MODEL 46 FLAT SHEETED

SECTION 08350 ELECTRIC FOUR FOLD DOORS MODEL 46 FLAT SHEETED PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

Solar Powered TS1000 Installation Pictures. (Trench and Fill Method) City of Vallejo, CA

Solar Powered TS1000 Installation Pictures (Trench and Fill Method) City of Vallejo, CA 12/04/09 Page 1 Pre-installation Phase 1. Main system components arrive on one or more pallets. 2. Optional pole

Revisions for the 2015 Edition of the "Specifications and Requirements for Electric Installations (Bluebook)"

Revisions for the 2015 Edition of the "Specifications and for Electric Installations (Bluebook)" PAGE NUMBER OF 2015 EDITION Front Cover Front Cover i i PAGE NUMBER OF 2007 EDITION Front Cover Front Cover

City of Parksville Roadway Lighting and. Roadway Lighting and Traffic Signals Section 8 I N D E X

Traffic Signals Design Roadway Lighting and Traffic Signals Section 8 I N D E X Roadway Lighting and Traffic Signals Design Criteria 8.1 General 8.2 Standard Drawings 8.3 Roadway Classification 8.4 Pole

05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES

PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories

ENGINEERING DESIGN & IMPROVEMENT STANDARDS

ENGINEERING DESIGN & IMPROVEMENT STANDARDS 2016 Prepared by: Engineering Division For latest edition of these Improvement Standards, refer to City of Visalia website at: www.visalia.city/engineeringdocuments

ANY SPECIFICATION DRAWINGS OR DATED PRIOR TO SEPTEMBER 2015 WILL NOT BE HONORED.

November 30, 2015 Dear STEMC Member and Contractors, Over the years, STEMC has made many changes to its member requirements for new services and specifications associated with those requirements. As a

Transformer Pads and BURD Cages

Transformer Pads and BURD Cages 48 x 54 Concrete Pad SCE BOX4854CON 48 x 54 RPM Pad SCE BOX4854P 44 x 46 Concrete SDG&E Pad - BOX3421P 48 x 72 Concrete Pad IID BOX4872P 72 x 94 Concrete Pad S.C.E. BOX7294P

TS 804 CABLES TABLE OF CONTENTS TRAFFIC SIGNAL EQUIPMENT POLE WIRING DIAGRAM LOCATIONS WITH CENTRE MEDIANS

TORONTO TRANSPORTATION January 2012 TS 804 CABLES TABLE OF CONTENTS 1. DRAWINGS TTD 804.001 TTD 804.002 TTD 804.003 TTD 804.005 TTD 804.006 TTD 804.007 TTD 804.010 TTD 804.015 TTD 804.020 TTD 804.025 TTD

Street Light Installation Specifications. 425 East Baltimore Street Hagerstown, MD Phone: (301) Fax: (301)

Street Light Installation Specifications 425 East Baltimore Street Hagerstown, MD 21740 Phone: (301) 790-2600 Fax: (301) 739-7958 Effective: June 2018 Table of Contents I. Introduction 3 II. Definitions

CONTENTS. B. System Design and Performance Requirements

16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or

Sign & Post Installation. Standard Specifications and Standard Drawings. July 2017 Edition

Standard Specifications Sign & Post Installation Utility Services Department 500 George Street North, Peterborough, Ontario, K9H 3R9 Transportation Division Telephone: 705-742-7771 Fax: 705-876-4621 Sign

Metering Installations for Mobile Homes or Mobile Home Parks:

Metering Installations for Mobile Homes or Mobile Home Parks: Overhead Installations The metering pole must be a minimum of 17 ft, Class 5 pole set at least 4 ft deep so that it will be of sufficient height

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions

Hennepin County Transportation Department ADDENDUM

Hennepin County Transportation Department ADDENDUM TO PLANS, SPECIFICATIONS AND SPECIAL PROVISIONS FOR SPAN WIRE AL REPLACEMENTS HENNEPIN COUNTY TRANSPORTATION DEPARTMENT (To be opened Tuesday, February

Re: Cable Terminals, Cable Terminal Boxes or Housings or Electric Meter Sockets, or Cable Terminal or Junction Blocks

Re: Cable Terminals, Cable Terminal Boxes or Housings or Electric Meter Sockets, or Cable Terminal or Junction Blocks Staff Contact: William F. Mascaro Telephone (703) 838-1834 mascaro@nmfta.org Proponent:

CS-21 STREET STRUCTURES TABLE OF CONTENTS

TABLE OF CONTENTS CS-21.0 Street Structures... 1 CS-21.1 Road Signs... 1 CS-21.2 Safety Barriers... 1 CS-21.3 Bollards and Removable Bollards... 1 CS-21.4 Pedestrian Barrier Rails and Handrails... 1 CS-21.5

SUBSTRUCTURE ELECTRIC CONSTRUCTION STANDARDS TABLE OF CONTENTS SECTION 1 GENERAL INFORMATION CONTENTS

ELECTRIC STANDARDS SECTION 1 GENERAL INFORMATION CONTENTS ELECTRIC S INSTALLATION GUIDE INFORMATION - INFO GENERAL INFORMATION TO VOLUME HOLDERS...SHEET 1.2.2 ELECTRIC INSTALL GUIDE - GENERAL #1 PURPOSE...SHEET

Drawing Modification Summary Effective:

Illinois Tollway Base Sheet Revisions Section M Base Sheet Drawings Drawing Modification Summary Effective: 03-31-2017 Roadway (RDY)-Series 400 M-RDY-408 Approach Slab, Mainline Sheet 3 Added slipforming

CONSTRUCTION STANDARDS SECTION CS 15 STREET LIGHTING

CONSTRUCTION STANDARDS SECTION CS 15 STREET LIGHTING CS 15-0l SCOPE: Street Lighting improvements shall be constructed in conformance with Section 86, Signals, Lighting and Electrical Systems, of the CALTRANS

INDEX. Page SECTION 1.0: SCOPE Toronto Hydro Requirements Ontario Electrical Safety Code 1 SECTION 2.0: PURPOSE 1

INDEX Page SECTION 1.0: SCOPE 1 1.1 Toronto Hydro Requirements 1 1.2 Ontario Electrical Safety Code 1 SECTION 2.0: PURPOSE 1 SECTION 3.0: DEFINITIONS AND THE INTERNATIONAL SYSTEM OF UNITS 1 3.1 Definitions

SMALL CELL DESIGN GUIDELINES

Section 1: Collocations on Existing Wireless Support Structures (Type I and II Requests) 1.1 Collocations Encouraged. The collocation of wireless facilities on existing support structures engineered to

2019 Traffic Signal Specifications

2019 Traffic Signal Specifications This document contains the specifications for construction and maintenance of traffic signals within Arlington County. These specifications supplement related VDOT Road

Embry-Riddle Aeronautical University Signage Specifications 03/25/2008

Embry-Riddle Aeronautical University Signage Specifications 03/25/2008 The following specifications are for the fabrication, painting of signs, graphics& installation of 4 (four) typical sign designs for

CHAPTER 12 HANDHOLES, PULLING VAULTS, AND JUNCTION BOXES

CHAPTER 12 HANDHOLES, PULLING VAULTS, AND JUNCTION BOXES HANDHOLES, PULLING VAULTS, AND JUNCTION BOXES The standards and requirements for handholes, pulling vaults, and junction boxes are presented in

SECTION 2900 TRAFFIC SIGNALS CITY OF LEES SUMMIT, MISSOURI STANDARD SPECIFICATIONS TABLE OF CONTENTS

SECTION 2900 TRAFFIC SIGNALS CITY OF LEES SUMMIT, MISSOURI STANDARD SPECIFICATIONS TABLE OF CONTENTS 2901 General... 2 2902 Temporary Traffic Signals... 3 2903 Span Wire Assemblies... 3 2904 Power Supplies...

Transmission Line General Requirements Including Typical Overhead Line Structures. Document Number: 1-03-FR-09

Transmission Line General Requirements Including Typical Overhead Line Structures Document Number: 1-03-FR-09 VERSION 1.0 June 2018 This functional requirements document is in line with the organisation's

SECTION B PART 3 SUPPLEMENTAL STANDARDS FOR TRAFFIC SIGNAL AND STREET LIGHTING (STS)

SECTION B PART 3 SUPPLEMENTAL STANDARDS FOR TRAFFIC SIGNAL AND STREET LIGHTING STANDARD CONTRACT DOCUMENTS FOR MUNICIPAL CONSTRUCTION PROJECTS 2019 EDITION 141 SECTION B PART 3 SUPPLEMENTAL STANDARDS FOR

SCHEDULE G REGULATIONS, STANDARDS AND SPECIFICATIONS FOR THE INSTALLATION OF STREET LIGHTING

SCHEDULE G REGULATIONS, STANDARDS AND SPECIFICATIONS FOR THE INSTALLATION OF STREET LIGHTING This is Schedule G of the City of Vernon Subdivision and Development Servicing Bylaw No. 3843, 2008 Patti Bridal

16. Design of Pipeline Structures.

16. Design of Pipeline Structures. a. General. 1) The following guidelines are for the design of structures for water and sewer pipelines including structural concrete and miscellaneous metals design.

CITY OF FARGO SPECIFICATIONS SIGNING

SECTION 4300 SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary

ADDENDUM NO. 1 LAWRENCE MERRIMACK STREET UTILITY IMPROVEMENTS PROJECT RESPONSE TO CONTRACTOR QUESTIONS:

City of Lawrence Office of Planning & Development Merrimack Street Utility Improvements Project IFB ADDENDUM NO. 1 September 15, 2017 To Prospective Bidders and Others on: LAWRENCE MERRIMACK STREET UTILITY

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL WARNING Before digging or trenching... Call 811 Indiana Underground Protection Service 1-800-382-5544 AVOID BURIED POWER CABLES 4901 East Park 30 Drive P.O.

CONSTRUCTION SPECIFICATION FOR POLE ERECTION

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 615 NOVEMBER 2006 CONSTRUCTION SPECIFICATION FOR POLE ERECTION TABLE OF CONTENTS 615.01 SCOPE 615.02 REFERENCES 615.03 DEFINITIONS - Not Used 615.04

SECTION G40 SITE ELECTRICAL UTILITIES 11/10

G40 GENERAL SECTION G40 SITE ELECTRICAL UTILITIES 11/10 RFP Part 3 including the Engineering System Requirements (ESR) provide project specific requirements. The RFP Part 4, Performance Technical Sections

Lesson 7 REINFORCING CAGE. Version 1-1/

Lesson 7 REINFORCING CAGE 7-1 Version 1-1/15 7-1 Learning Outcomes Describe cage construction Determine the circumference of a shaft and rebar cage and calculate the required number of side spacers. Explain

Tacoma Mall Office Building 4301 South Pine Street, Suite 446 Tacoma, Washington (253) Fax (253)

Tacoma Mall Office Building 4301 South Pine Street, Suite 446 Tacoma, Washington 98409-7207 (253) 798-7250 Fax (253) 798-4233 www.piercecountywa.org/roadstandards March 2012 Foreword This manual contains

Section 7: Specifications

Section 7: Specifications 29 31 Building Boundary of Clear Area See Note # 1 8' Shrubs 8' Concrete Pad Equipment 8' TRAVELED WAY M Meter Pedestal 8' Curb Protective Vehicle Posts (Bollards) If Required

2017 Traffic Signal Specifications

2017 Traffic Signal Specifications This document contains the specifications for construction and maintenance of traffic signals within Arlington County. These specifications supplement related VDOT Road

Electrical Standard Specifications and Standard Drawings

Utility Services Department 500 George Street North, Peterborough, Ontario, K9H 3R9 Transportation Division Telephone: 705-742-7771 Fax: 705-876-4621 Electrical Standard Specifications and Standard Drawings

Grant PUD. Joint Use Standards. For Pole Attachments including: Cable Television Fiber Optics Telecommunications

Grant PUD Joint Use Standards For Pole Attachments including: Cable Television Fiber Optics Telecommunications REVISED: July 25, 2018 INTRODUCTION AND OVERVIEW The information contained in these Joint

HIGH MAST CAMERA POLE ASSEMBLY GENERAL

10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera

CONSTRUCTION SPECIFICATION FOR TRAFFIC ACTUATION EQUIPMENT

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 623 JANUARY 1990 CONSTRUCTION SPECIFICATION FOR TRAFFIC ACTUATION EQUIPMENT 623.01 SCOPE 623.02 REFERENCES 623.05 MATERIALS TABLE OF CONTENTS 623.05.01

This guide can be used to prepare a specification for incorporating wall bracket jib cranes into a competitively bid construction project.

SECTION 14654 WALL BRACKET JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial

VSS-2 ½ D HIGH HEAD SUMP PUMP FREE STANDING

Flows to 200 GPM. TDH to 95 Feet at 1750 RPM Free Standing or Guide Rail Design. Available in Standard Submersible or Explosion Proof Design. Provided with 25 feet of submersible motor power cable. Cast

Drawing Modification Summary Effective: Roadway (RDY)-Series 400

Illinois Tollway Base Sheet Revisions Section M Base Sheet Drawings Drawing Modification Summary Effective: 03-31-2016 The electronic (pdf) version of the Standard Drawing are now made searchable (text).

SECTION HIGHWAY GRADE CROSSING WARNING SYSTEMS

SECTION 18700 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes requirements for highway grade crossing warning systems. B. Where shown on the Contract Drawings or as required to accommodate associated

2017 Traffic Signal Specifications

2017 Traffic Signal Specifications This document contains the specifications for construction and maintenance of traffic signals within Arlington County. These specifications supplement related VDOT Road

VILLAGE OF LOMBARD CONTRACT DOCUMENT NUMBER SS BID PROPOSAL

Page 312 VILLAGE OF LOMBARD CONTRACT DOCUMENT NUMBER SS-12-01 BID PROPOSAL I/We hereby agree to furnish to the Village of Lombard all necessary materials, equipment, and labor, to complete the IL ROUTE

F-SERIES: F SPECIFICATIONS Four-Fold Door Systems

Version 5.22.13 F-SERIES: F100-600 SPECIFICATIONS Four-Fold Door Systems OPTIONS ARE IN BOLD, PLEASE MODIFY THESE AREAS AS NEEDED BASED ON YOUR PROJECT. CONSULT MANUFACTURER FOR ADDITIONAL OPTIONS OR MODIFICATIONS.

400 watt, high pressure sodium. Type C watt, high pressure sodium Collector Street Light Units

CITY OF MEDFORD PUBLIC WORKS DEPARTMENT ENGINEERING & DEVELOPMENT DIVISION TRAFFIC ENGINEERING SECTION April 15, 2010 Street Lighting Standards and Specifications Luminaire Types Type R-100 100 watt, high

Douglas County Traffic Signal Installation Guidelines (January 2013)

Douglas County Traffic Signal Installation Guidelines (January 2013) The following guidelines are minimum requirements for equipment installation. Section A. Poles and Foundations ( Wood, Concrete, Mast