CASSETTE BS Specification book
|
|
- Andrea Stafford
- 6 years ago
- Views:
Transcription
1 CASSETTE BS Specification book Edition: April 2011 ArcelorMittal Construction International Industriestrasse Otelfingen / Zürich Switzerland
2 PRESENTATION OF THE SYSTEM The BS cassette system includes facings made of pre-coated galvanised steel sheets, of stainless steel sheets or of aluminium alloy sheets fixed with traversing fixtures, and flashings made of the same materials as the cassettes. A set of accessories obtained by folding enables to work on specific points (eaves, lead strips, angles...). The system is designed to be implemented on new constructions, or on constructions undergoing refurbishment work: private, public or industrial buildings, shopping malls, or residences. TECHNICAL SPECIFICATIONS Manufacturing: folding The manufacturing dimensions (height and width) can vary depending on the material used and its thickness. Galvanized steel cassettes Aluminium alloy cassettes Height (mm) Width (mm) Height (mm) Width (mm) 100 to to to to to to to to 1360 MATERIALS Material Thickness (mm) Steel 1 to 2 Stainless steel Aluminum alloy Grade Standard Protection Standard S320 GD + Z 225 EN P Pre-coated according to colorissime by ARVAL Post coating with polyester powdering XP P34301 P to EN to NF A Pre-coated NF P to H24 POLYESTER NF A H24 post coated NF P It's possible to order these in raw, pre-weathered, semi-hard copper, conditional on approval by AMC. The various colours and surface finishes are to be submitted to AMC so as to verify feasibility: Pre-coated steel with nacre finish: COLORISSIME by Arval colour Post-coated steel through powdering: RAL colour In the case of specific requirements, in terms of aesthetics for example, the visible face of BS cassettes can be rendered more rigid by fixing onto the back face a system comprising a rigid
3 core (extruded polystyrene, honey comb polypropylene or mineral wool) and 0.5 mm-thick galvanised steel sheets The seal covers are made of the same material as the cassettes, with 1 mm thick sheet. A waterproof seal is fixed to the seal cover, which enables to ensure that the vertical hollow joints remain watertight once fixed. The finishes are made of the same sheets as the cassettes, with a maximum length of 6.00 meters. Eave crown (technical diagrams - fig. 11) Outgoing angle (technical diagrams fig.13 &14) Ingoing angle (technical diagrams fig.15 & 16) Lead strips, etc (technical diagrams fig.12) etc. (technical diagrams fig.7 to 10) IMPLEMENTATION The BS Cassettes should be placed on an adjusted secondary frame so as to enable the circulation of a layer of ventilated air between the cassettes and the wall of the support, or possibly the thermal insulation. This frame must satisfy the requirements set forth in the document C.S.T.B. n 3194 January - February 2000 «General conditions governing the design and implementation of the metal structure and thermal insulation of decorative cladding." The fixing of BS cassettes to the frame must be made with self-tapping or hole-finding screws, which aren't supplied by AMC. These screws are to show a resistance to tearing that is compatible with the wind loads affecting the cassettes, especially in low pressure conditions. The lower section of the cassettes overlaps the upper section of the inferior cassettes, thus ensuring water tightness at the level of all horizontal seals. The vertical seal cover is attached at the level of the vertical hollow joint between two cassettes with self-tapping screws with a minimum diameter of 4.8 mm. At least two screws should be used per meter, in order to ensure that the vertical seals between cassettes are waterproof. PACKAGING AND TRANSPORT A delivery note is appended to each parcel and details the following: Customer order reference, Batch reference, Name of the customer Type of product Thickness of the facing Content of the package (amount and length) Colour reference of pre-coated sheets.
4 The BS cassettes are packaged as part of the production line. The weight of the package can not exceed 2.5 tons. BS cassettes and their accessories are to be transported in a manner that ensures their integrity (wedged parcels, carefully bunched and strapped down, closed trucks). ORGANIZATION The AMC company is a product manufacturer and does not carry out installation operations. The implementation of BS cassettes must be performed by professional companies that are qualified to carry out these operations. The design and preliminary studies prior to the building of the façade are neither the responsibility of AMC nor of its distributors. Upon request, AMC can provide technical assistance. This guide does not aim to provide all the details of the implementation process, but to give the main technical specificities and properties of the cassettes. In order to provide some assistance with the façades, some design suggestions concerning particular points and finishes are appended to the guide. The appended diagrams are given as examples, and other solutions may be considered. UNLOADING, STORAGE AND HANDLING The handling operations are to be carried out with the product specificities taken into account. They're to be handled vertically. They are to be stored on flat surfaces, with the parcels slightly inclined longitudinally, and care must be taken so that not more than two parcels overlap. The storage time on the construction site must be limited to the minimum necessary. One crucial precaution consists in preventing water infiltrating, by dripping or condensation, between the panels. They are to be sheltered from direct sunlight. The protection film covering the BS cassettes must be peeled-off in advance, at the latest 15 days after delivery. The metal façades are to undergo normal maintenance operations, as per provisions set forth in the Professional Regulations Governing Metal Cladding (article , outdoor maintenance). Although the surface is naturally cleaned by rain water, it can also be cleaned regularly with detergent-free household cleaning products, with no solvent nor abrasive agents, followed by clear water rinsing. Maintenance operations include: removal of various forms of vegetation (e.g. moss) and any other foreign items that have been deposited on the facing's surface. Repairs to localised damages as soon as these are identified, such as corrosion points caused by exterior actions and damages for example.
5 SCHEMATIC DRAWINGS OF DETAILS The following illustrations provide examples of specific points to treat when installing a BS cassette cladding. Many other solutions may be considered and examined by the company tasked with installation operations, depending on product specificities. Please contact us for any additional information. IMPORTANT The content of this document is based on data relating to construction and material properties. It's designed to help AMC customers use our products. Based on procedures and construction methods that were known at the moment of the publication, this Implementation Guide should not be considered as the final version and can be reviewed and/or amended at any moment. In case of doubt or difficulties, the user should contact AMC before proceeding with the project.
6 TECHNICAL DIAGRAMS BS cassette layout fig.1 BS cassette façade layout A A B B
7 BS cassette decorative façade l t fig.3
8 Decorative cladding acroterium crown fig.5 fig.6
9 Double skin cladding eave Base of decorative cladding fig.8
10 fig.9 Double skin cladding base fig.10
11 DECORATIVE CLADDING STRAIGHT ANGLE fig.11 STRAIGHT ANGLE CASSETTE CROSS- SECTION fig.12
12 DOUBLE SKIN CLADDING STRAIGHT ANGLE fig.13 BAY WINDOW COATING
13 CROSS SECTION ON JAMB fig.16
MASCARET Implementation Guide
MASCARET Implementation Guide Edition of August 21st, 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr -2-
More informationST PRODUCTS Implementation Guide
ST PRODUCTS Implementation Guide Edition of 24 october 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr -2SYSTEM
More informationECAILLE Implementation Guide
-1- ECAILLE Implementation Guide Published 21 August 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr -2PRESENTATION
More informationCASSETTE SP Implementation guide
CASSETTE SP Implementation guide Published on 21 August 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr PRESENTATION
More informationGASCOGNE Implementation Guide
GASCOGNE Implementation Guide Edition of August 21st, 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr SYSTEM
More informationOXYGEN Implementation Guide
OXYGEN Implementation Guide Published on 21 August 2007 PMA by Arval ZA du Pays de Podensac 33720 CERONS - France Tel. +33 (0)5.57.98.14.50 Fax. +33 (0)5.57.98.14.60 commercial@pma.fr www.pma.fr PRESENTATION
More informationInstallation guidelines System: Cofraplus 220
Edition: February 2012 Installation guidelines System: Cofraplus 220 ArcelorMittal Construction International Industriestrasse 19 8112 Otelfingen / Zürich Switzerland www.arcelormittal.com/arval Summary
More informationRUUKKI FORMA DESIGN INSTRUCTION
www.ruukki.com RUUKKI FORMA DESIGN INSTRUCTION 1. General Ruukki Forma is a complete façade system in which Ruukki energy panels form an energy efficient base structure and Ruukki cladding products finalize
More informationRUUKKI FAÇADE SYSTEMS
www.ruukki.co.uk RUUKKI FAÇADE SYSTEMS 1. General Ruukki Forma is a complete façade system in which Ruukki energy panels form an energy efficient base structure and Ruukki cladding products finalize the
More informationH92 RAINSCREEN CLADDING
TO BE READ WITH PRELIMINARIES/GENERALCONDITIONS TYPES OF CLADDING Plasmet PR-200 Aluminium Rainscreen System comprising of 3mm thick polyester powder coated cassette panels with riveted aluminium fixing
More informationPromistyl 3005T - roofing
Metal Cladding Panel reference Arval Globalroof Promistyl 3005T ribbed face fix composite fire rated roofing panels Arval Promistyl 3005T Manufacturer ArcelorMittal Lammerdries 82440 Geel Belgium web site:
More informationExterior System installation instructions
Exterior System installation instructions 11/20/14 WPS ES-400 & 500 INSTALLATION INSTRUCTION. The WPS ES-400 & 500 systems Façade panels are designed for use as an external wall cladding in conjunction
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationGA APPLICATION OF GYPSUM SHEATHING
1. Scope 1.1 This specification describes the minimum requirements for, and the methods of handling, storage, and application of, gypsum sheathing for use as a substrate for exterior claddings. 1.1.1 Exterior
More informationGM-CM30078-RevA. Metalcraft Insulated Panel Systems I Specification Guide V1 NZ I June
GM-CM30078-RevA Metalcraft Insulated Panel Systems I Specification Guide V1 NZ I June 2017 2 Metalcraft Insulated Panel Systems I Specification Guide V1 NZ I June 2017 INDEX 1. General 2 2. Documents 2
More informationArchitectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL WALL PANELS This Guide Specification
More informationPage 1 of 5
SPECIFICATIONS COMPOSITE MATERIAL PANEL SYSTEM ESTOLGA 1000 DRY SEAL SYSTEM PART 1 GENERAL 1.01 SECTION INCLUDES A. Exterior cladding consisting of formed metal composite material (MCM) sheet, secondary
More informationTable of Contents. Certificates and approvals Colour palette...52
Table of Contents "krono-plan" facade systems...2 1. Introduction...3 2. Facade system...4 3. Gaps and joints between the Kronoplan laminate panels...5 4. Corners...6 5. Visible joints. Aluminium structure
More informationSECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
More informationNational Master Specification (NMS) Section Publisher: Spex.ca Page 1. Approved: RELATED REQUIREMENTS.1 Section [ ].
National Master Specification (NMS) Section 07 21 16 BLANKET INSULATION Publisher: Spex.ca Page 1 Approved: 2014-12-31 Part 1 General 1.1 RELATED REQUIREMENTS.1 Section [ ]. 1.2 REFERENCES.1 CSA Group.1
More informationProduction Technology
Introduction There has been a need to introduce new QUALITY PRODUCTS in the construction & Cold Storage industry in the region for many years. EIP was set up at Dubai Investment Park in the UAE to address
More informationUnitised Curtain Wall Beaded
Unitised Curtain Wall Beaded Glazed Frame Unitised Curtain Wall Reference Brand: Sapa Building System Elegance 72 GF GENERAL DESCRIPTION Unitised curtain wall system using glazing beads for glass retention.
More informationArchitectural Roof Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Roof Products Guide Specifications FORMED METAL ROOF AND WALL PANELS This Guide Specification
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More informationSolarStyl BIPV New Building Integrated Photovoltaic System August V13 Page 0
SolarStyl BIPV New Building Integrated Photovoltaic System 2010 August V13 Page 0 By ArcelorMittal Stainless & Nickel Alloys SolarStyl Frame for BIPV Systems To simplify photovoltaic roof and facade design.
More informationGuide Specifications for Prodema PRODEX External Cladding
Guide Specifications for Prodema PRODEX External Cladding SECTION 07420 Exterior Wall Cladding Note: These specifications were current at the time of publication but are subject to change at any time without
More informationBAILEY. RAINSCREEN CLADDING. Bespoke secret fix Rainscreen Cladding Systems available in a range of materials and finishes
BAILEY. RAINSCREEN CLADDING. Bespoke secret fix Rainscreen Cladding Systems available in a range of materials and finishes WWW.BAILEY-UK.COM TOTAL BUILDING ENVELOPE CREATE STRIKING, INSPIRING BUILDINGS
More informationSECTION PORCELAIN TILE WALL SYSTEM. (Porcelanosa Venis Urbatek)
SECTION 074251 (Porcelanosa Venis Urbatek) PART 1 - GENERAL 1.1 GENERAL PROVISIONS A. Attention is directed to the CONTRACT AND GENERAL CONDITIONS and all Sections within DIVISION 01 - GENERAL REQUIREMENTS
More informationAMS MU800 Matrix Curtain Walling
SPECIFICATION AMS MU800 Matrix Curtain Walling The AMS MU800 Matrix mullion drained curtain walling system offers unique architectural design features combined with market leading weather performance.
More informationBlast Resistant Enhanced Curtain Wall. Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION PERFORMANCE
Blast Resistant Enhanced Curtain Wall Blast Resistant Enhanced Curtain Wall Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationArchitectural Louvre Panels. Manufactured in Great Britain. Aquarius. Louvre Panel Systems SOLINEAR. integration / imagination / innovation
Manufactured in Great Britain Aquarius SOLINEAR integration / imagination / innovation XLINE AQ50 Louvre Panel & Volume Control Damper XLINE AQ50 Louvre Panel Aquarius XLINE-AQ50 and XLINE-AQ50-CH2 This
More informationAluminium Coping Systems
Aluminium Coping Systems Excellence in aluminium engineering >Company Profile Alifabs leads the field in the design, production and installation of aluminium building products. Our experience spans some
More informationArchitectural Roof and Wall Products Guide Specifications
Architectural Roof and Wall Products Guide Specifications 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 FORMED METAL ROOF AND WALL PANELS This Guide Specification is to be used
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: TRESPA NORTH AMERICA, LTD.
0 ICC ES Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 Most Widely Accepted and Trusted ESR 1687 Reissued 02/2016 This report is subject to renewal 02/2017. DIVISION: 07 00 00 THERMAL
More informationRAINSCREEN CLADDING. Bespoke secret fix Rainscreen cladding system available in range of materials and finishes. Delivering your design
RAINSCREEN CLADDING Bespoke secret fix Rainscreen cladding system available in range of materials and finishes. Delivering your design Bailey Rainscreen cladding systems provide a bespoke solution to your
More informationSeries ESK / ESB. Cabinets in Modular Design. Manufacturing Program: ESK-20 ESK-40 ESK-80 ESB Sandwich construction 20 mm, 40 mm and 80 mm
Series ESK / ESB Sandwich construction 20 mm, 40 mm and 80 mm Thermal conductivity k: 1,2 W/m 2 K at ESK-20 : 0,75 W/m²K at ESK-40 : 0,35 W/m²K at ESK-80 Self-supporting, frameless construction built with
More informationmcr LAM louvered vents
mcr LAM louvered vents KLAPY LOUVERED ŻALUZJOWE VENTS Smoke and hot gases generated during fire pose a serious hazard to the life of people in burning rooms, to the property stored in the building and
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED RAINSCREEN SYSTEM
RAINSCREEN (H&J) SYSTEM INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630)
More informationARCHITECTURAL WALL PANELS APPLIED OVER A SHEATHED STUDWALL BY MEANS OF A FIELD ASSEMBLED RAINSCREEN SYSTEM
RAINSCREEN (H&J) SYSTEM INSTALLATION DATA & DETAILS Omnis Panels, Inc. Architectural Building Panels 22 East Chicago Avenue Suite 210 Naperville, Illinois 60540 (800) 450-6099 (630) 355-4040 Fax: (630)
More informationSPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF. Two Sided Structurally Glazed Curtain Walling. (Horizontal Structural joints)
SPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF Two Sided Structurally Glazed Curtain Walling (Horizontal Structural joints) Issue date Revision Comment R0 Draft 05/05/09 R1 Approved
More informationArchitectural Roof Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Roof Products Guide Specifications FORMED METAL ROOF AND WALL PANELS This Guide Specification
More informationDICTATOR Lift Shaft System
DICTATOR Lift Shaft System The Modular Lift Shaft System, also for Retrofitting Certified According to EN 1090 A lift is becoming more and more important for daily life, not only in newly constructed buildings
More informationType II Environmental Declaration according ISO 14021:2001/A1:2011
Type II Environmental Declaration according ISO 14021:2001/A1:2011 Product: Hunter Douglas Panels Module 200-600mm Product code: 26005 Module 601-900mm Product code: 26025 Module 901-1200mm Product code:
More informationArcwall. Rain Screen Wall System
Rain Screen Wall System is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines excellent performance
More informationPARTITIONS & EXTERNAL WALLS 5
PARTITIONS & EXTERNAL WALLS INTERNAL PARTITIONS CONVERSION OF EXTERNAL WALL TO INTERNAL WALL TECHNICAL DATA 30 minutes fire rating, integrity and insulation in accordance with the criteria of BS 7: Part
More informationKingspan Day-Lite Klick
Insulated Panel Envelope Systems Roof Wall Façades Lighting Rooftop PV Coldstore Structural Products Cleanrooms UK & Ireland Kingspan Day-Lite Klick Installation Guide Page 2 Accessories Overview Designation
More information1 Exam Prep Application and Finishing of Gypsum Board GA Tabs and Highlights
1 Exam Prep Application and Finishing of Gypsum Board GA-216-2013 Tabs and s These 1 Exam Prep Tabs are based on the Gypsum Association GA-216-2013 Application and Finishing of Gypsum Panel Products. Each
More informationSandwich panel SPA Product description
Sandwich panel SPA Product description Ruukki offers a sandwich panel system that combines an attractive appearance with excellent thermal insulation and fire-resistance. The panels are of a lightweight,
More informationPRELIMINARY. Flush Glazed Continental Folding Doors Section Identification. T: E: W:
V: 1.0 240614 Flush Glazed Continental Folding Doors Section Identification T: 01268 681612 E: sales@duration.co.uk W: www.duration.co.uk E.& O.E. Specification General Versatile and flexible this market
More informationSRP-AirOutshield UV Issued:
SECTION 07276: SRP-AirOutshield UV Ultra Violet (UV) resistant, Vapour Permeable Air Barrier Underlayment and Sheathing Membrane Guide Specification This specification is a guide only and may need editing
More informationPROFILE S6 CORRUGATED SHEETS
PROFILE S6 CORRUGATED SHEETS CONTENT 02 04 06 The ideal corrugated sheet exists Why choose PROFILE S6 corrugated sheets Colours 07 Range 08 Accessories 10 Pre-grooved/ mitred corners The ideal corrugated
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: PARKLEX USA
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3462 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 07 00
More informationSECTION ROOFING AND SIDING PANELS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 40 00 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph
More information1 Exam Prep Application and Finishing of Gypsum Board GA Tabs and Highlights
1 Exam Prep Application and Finishing of Gypsum Board GA-216-2016 Tabs and s These 1 Exam Prep Tabs are based on the Gypsum Association GA-216-2016 Application and Finishing of Gypsum Panel Products. Each
More informationArcwall. Rain Screen Wall System
Arcwall Rain Screen Wall System Arcwall is an economical drained and back-ventilated rain screen system for both walls and soffits manufactured from formed aluminum or stainless plate. The system combines
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationSpecifications. Some details shown in this document have been reproduced from CCANZ document CP 01.
BRICKVENEERS Specifications Bowers Brick Veneer meets the requirements of AS/NZS 4455 as a masonry brick veneer and complies with and exceeds the 15 year durability requirements as stated in the New Zealand
More informationLeading in integration for partial- and full roofs: Photovoltaic in-roof mounting system Solrif by Schweizer.
Leading in integration for partial- and full roofs: Photovoltaic in-roof mounting system Solrif by Schweizer. Aesthetically pleasing yet powerful: Photovoltaic in-roof mounting system Solrif by Schweizer.
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: FUNDERMAX GMBH
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3340 Reissued 05/2017 This report is subject to renewal 05/2018. DIVISION: 07 00 00 THERMAL
More informationOnduline covers the world. More than 100 countries across the globe
Onduline covers the world Onduline was founded in 1950 to manufacture and market the now famous corrugated roofing sheets. The outstanding growth and success of Onduline in the last 60 years has seen the
More informationCI/Sfb. (47) Nh March Aluminium & Steel Profiled Cladding Systems RIGIDAL PROFILEDCLADDING
CI/Sfb (47) Nh March 2006 Aluminium & Profiled Cladding Systems RIGIDAL PROFILEDCLADDING The Rigidal Range of Profiled Cladding Rigidal Industries manufacture an extensive range of aluminium and steel
More informationSPECIFICATION For the Supply and Installation of BRITAL UN Four Sided Unitized Structurally Glazed Curtain Walling
SPECIFICATION For the Supply and Installation of BRITAL UN-4-76 Four Sided Unitized Structurally Glazed Curtain Walling Issue date Revision Comment 07/05/09 R0 Draft 11/05/09 R1 Approved for Issue R1 Amended
More information[Project Name] Section [ ]
Page 1 PART 1 - GENERAL 1.1 SECTION INCLUDES 1.1.1 Design, labor, products, equipment and services necessary for interior/exterior Aluminum Facade System (AFS) work, in accordance with the Contract Documents.
More informationCurtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More information1.1.2 All window frames will be Kite marked to indicate compliance with these standards.
PVC-u WINDOWS Specification 1.1 General Spcification 1.1.1 All products supplied will fully comply with current editions of all relevant British Standards and Codes of Practice, and in particular all profiles
More informationSERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651
SERIES SA30 STEEL/ALUMINUM FIXED DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows as
More informationSERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651
SERIES STB30 STEEL FIXED THERMAL BREAK DETENTION WINDOWS SECTION 08651 PART 1 GENERAL 1.1 DESCRIPTION A. Work Included: 1. Furnish all labor and materials to complete the fabrication of detention windows
More informationArchitectural Roofing
ArcTray 1. GENERAL This section deals with the supply and fixing of ArcTray overlap rigid sheet metal profiled roofing and/or cladding complete with accessories. Documents 1.1 DOCUMENTS REFERRED TO Documents
More informationSUN LOUVRES. Allux Metal ceiling systems. Zagorska Jakovlje - Zagreb. Tel.: Fax:
Allux Metal ceiling systems Zagorska 22 10297 Jakovlje - Zagreb Tel.:+385 1 33 55 056 Fax:+385 1 33 55 058 e-mail: allux@zg.htnet.hr www.allux.hr SUN LOUVRES USE ALLUX PRODUCTS FOR YOUR TECHNICAL AND
More informationSamrat External Wall Cladding.
Samrat External Wall Cladding www.samratcladage.com Wall Cladding Dictionary Meaning A covering or coating on a structure or material. Definition Is an application of one material over another to provide
More informationPART 1 / GENERAL SECTION ALUMINUM PLATE PANEL SYSTEM. ALPLY Insulated Panels. Alply TECH WALL Aluminum Plate System 2002
SECTION 07 42 13 ALUMINUM PLATE PANEL SYSTEM ALPLY Insulated Panels Alply TECH WALL Aluminum Plate System 2002 PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Preformed Aluminum Plate System for Screen wall
More informationJ41 Reinforced bitumen membrane roof coverings
J41 Reinforced bitumen membrane roof coverings To be read with Preliminaries/ General conditions. TYPES OF COVERING 115A SINGLE LAYER REINFORCED BITUMEN MEMBRANE WARM DECK ROOF COVERING warm roofing system
More informationSRP-AirOutshield ROOF Issued:
SECTION 07276: Breathable Underlayment Guide Specification This specification is a guide only and may need editing for the specific intended application. It is the responsibility of the design professional
More informationInsulation. First Revison October DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS
Insulation First Revison October 2016 DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS 1. General Information This Guide describes the use of Kingspan GreenGuard DC14 Drainage
More informationAmeriplate. Rain Screen Wall System
Ameriplate Rain Screen Wall System Efficiency and fascinating free-floating effects are hallmarks of Metalwërks Ameriplate wall systems. With Ameriplate, the cut edges of the face plate material are the
More informationV 2.4. Hardwood Decking Installation Manual
V 2.4 Hardwood Decking Installation Manual TABLE OF CONTENTS 1. Scope... 2 2. Health and Safety... 3 3. Site Preparation... 4 4. Pre-Installation... 4 5. Fixings... 5 6. Fixing Details for Decking... 6
More informationmaintenance-free free from painting easy to install Fixing Guide Cedral Click
maintenance-free free from painting easy to install Fixing Guide Cedral Click www.cedralsidings.com CONTENT Step by step guide to installing your Cedral Click façade Required materials and tools 1. Prepare
More informationSECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
More informationABOUT PRODUCT DESCRIPTION COMPLIANT USE OF MATERIAL
P R O D UC T IN T R O D UC T IO N W W W. F V. C O M. A U ABOUT PRODUCT DESCRIPTION Vitrabond Aluminium Composite Panel (ACP), is a CodeMark certified, highly versatile facade panel, offering excellent
More informationPolymeric membrane for roof waterproofing
Roofing Product Data Sheet Edition 06.2012 Identification no. 02 09 05 05 100 0 180000 Version no. 01 Sikaplan -SGK 1.8 (Trocal SGK 1.8 mm) Polymeric membrane for roof waterproofing Construction Product
More informationNote:
Email: sales@koolwall.com.au JANUARY 2009 ISSUE Note: When installing the koolwall panel system, please ensure you are using a copy of the most recently published edition of the installation manual. If
More informationSECTION EXTERIOR GRILLS AND SCREENS
SECTION 10 82 13 PART 1 GENERAL PART 1 1 SUMMARY A. Section Includes: 1. Exterior perforated aluminum screen wall system with Ombrae TM Optical Tile imaging technology. 2. Accessories including attachments,
More informationLUXALON. Other Luxalon products. QuadroCladn. Sandwich Wall. Multiple Panel Façade. Sun Louvres. Ceilings and Soffits
QuadroClad n Other Luxalon products QuadroCladn Sandwich Wall Multiple Panel Façade Sun Louvres Ceilings and Soffits Luxaclair Sealed Blinds Hunter Douglas Construction Elements BV Bellsize Close Walsall
More informationPRODUCTION SPECIFICATIONS INSULATED CONCRETE FORMS
PRODUCTION SPECIFICATIONS SECTION 03135 INSULATED CONCRETE FORMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Insulated panel permanent concrete form system for: 1. Exterior structural wall panels. 2. Interior
More informationPRODUCTION SPECIFICATIONS INSULATED CONCRETE FORMS
PRODUCTION SPECIFICATIONS SECTION 03135 INSULATED CONCRETE FORMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Insulated panel permanent concrete form system for: 1. Exterior structural wall panels. 2. Interior
More informationSpecifiers: Click on the icon in the WORD toolbar to reveal detailed instructions
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated
More informationExternal Steel Stud and Top Hat Walls. Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185
Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185 GENERAL REQUIREMENTS 185 FRAMING 185 PLASTERBOARD LAYOUT 189 PLASTERBOARD FIXING 190 EXTERIOR
More informationStanding Seam Systems. NBS Specification. KingZip SF Standing Seam Roofing System
NBS Specification KingZip SF Standing Seam Roofing System H31 METAL PROFILED/FLAT SHEET CLADDING/COVERING To be read with Preliminaries/General conditions. TYPE OF CLADDING SYSTEM 140 METAL PROFILED CLADDING
More informationSECTION METAL ROOF PANELS
SECTION 07 41 13 PART 1 GENERAL 1.1 SECTION INCLUDES A. Standing-seam roof panels. B. Metal roofing accessories. 1.2 RELATED SECTIONS A. Section 07 62 00 - Sheet Metal Flashing. B. Section 07 72 00 - Roof
More informationValue Benefits of Modular Construction in Building Extensions
Value Benefits of Modular Construction in Building Extensions SPEED OF INSTALLATION Extensions to existing buildings using modular units can be constructed in less than 50% of the time required for conventional
More informationAluminium SLIDING & BI-FOLD DOOR SYSTEMS
Aluminium SLIDING & BI-FOLD DOOR SYSTEMS Bi-Fold 26Hi / 26Hi+ Systems High Performance Thermally Enhanced Bi-Folding Door At Carroll s Glass our thermal range of Bi-Folding doors are the perfect solution
More informationInstallation Guide. PAROC panel solutions
Installation Guide PAROC panel solutions Panel System 4.00 INT January 2008 THESE INSTRUCTIONS ARE FOR NORMAL APPLICATIONS Work safety Preparation Wear protective gloves and clothing when handling the
More informationEQUITONE is a material supplier. Installation Contractors shall be trained and approved by EQUITONE.
This specification has been numbered, organized and formatted in accordance with the MasterFormat, Section Format and Page Format documents published jointly by Construction Specifications Institute (CSI)
More informationSeries 700 Series 7000 * 4 Heavy Commercial Roto-Vent Rotating Ventilator Window
Windows Curtain Walls Entrances Storefronts Series 700 Series 7000 * 4 Heavy Commercial Roto-Vent Rotating Ventilator Window Configurations Roto-Vent Fixed Series 700 and 7000 retain an AAMA Heavy Commercial
More informationOmniplate Barrier Wall System
is an economical barrier wall system with visible caulk joints at all horizontal and vertical panel joints. As a barrier wall, serves as the primary weather barrier for the building envelope. It can be
More information50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated
50948-RHN Putney Friday, 15 December 2017 This document includes: Code Section Revision Dated Z11 Purpose made metalwork 1 Table of Contents Title Z11 Purpose made metalwork Page 3 Z11 Purpose made metalwork
More informationMagnum Board Section Digicon Information Inc. Page 1
Digicon Information Inc. Page 1 This section includes sheathing for exterior walls for use in a potentially damp or wet exterior cladding environment. This sheathing section forms an exterior flat plane
More informationCaledonian University, Glasgow - Aluminium Rainscreen System
Caledonian University, Glasgow - Aluminium Rainscreen System I n t r o d u c t i o n CGL Systems was formed over sixty years ago and remains a private company to the present day. Although the company s
More informationTechnical information & installation advice
Technical information & installation advice Drop-in type loft access doors Product 1168 This loft access door is designed to fit between standard trussed rafters spaced accurately at 600mm centres and
More informationResysta Wall Cladding Installation Guidelines
Resysta Wall Cladding Installation Guidelines NOTE: Proper planning of the wall cladding layout is essential for ease of installation of wall cladding boards and wall cladding components. Thoroughly read
More information