Arco Cut Control System

Size: px

Start display at page:

Download "Arco Cut Control System"

Hilda Sophie Palmer
6 years ago
Views:

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:54 Page 1 Arco Cut

Terms and conditions apply. These are available on request or from www.

1 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :54 Page 1 Arco Cut Control System NEWS & COMMENT FOLLOW Arco Terms and conditions apply. These are available on request or from An innovative colour and number system for managing cut hazard protection

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:55 Page 3 Arco Cut Control System Handling injuries are the most common workplace injury accounting for around a third of all workplace injuries.

The estimated average number of days lost for each injury was 8.8 days (HSE)*.

application. With this in mind Arco has developed a new range of gloves offering mechanical protection that also includes a visual indicator of the level of cut protection the glove offers.

Having a number on the glove also removes any confusion as different brands have alternative colours for the different levels of protection.

2 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :55 Page 3 Arco Cut Control System Handling injuries are the most common workplace injury accounting for around a third of all workplace injuries. Handling injuries include trapped fingers and cuts from sharp objects. An estimated 1.2 million working days per year are lost due to handling injuries. The estimated average number of days lost for each injury was 8.8 days (HSE)*. Arco understand that there are many different types of gloves offering various levels of cut protection and it can be difficult to understand and specify the correct type of glove for your application. With this in mind Arco has developed a new range of gloves offering mechanical protection that also includes a visual indicator of the level of cut protection the glove offers. The new Arco Cut Control System makes it possible to see instantly what level of cut protection is being worn. Having a number on the glove also removes any confusion as different brands have alternative colours for the different levels of protection. Peace of mind, without the confusion Arco s new Cut Control System uses a clear colour/number coding system. Gloves are colour coded to illustrate the level of cut protection that they provide, plus as an additional visual aid each glove also features a clear number to confirm the level of cut protection. You can now carry out your visual inspections with confidence and ease. The colour/number combination is a convenient and failsafe solution which ensures both safety and efficiency. Excellent mechanical protection This new range of gloves features specifically sourced cut resistant threads blended together with other quality materials to provide excellent levels of cut protection, abrasion resistance and comfort. Standards Our new range of gloves have been designed and produced to the same high standards you have come to expect from Arco. We stay informed and are up to date with current regulations for hand protection, so, you can rest assured you are in safe hands. Our Cut Control System gloves have been tested and approved to meet all relevant standards. Arco Cut Control System gloves are approved to: EN 388:2003 Mechanical hazards are associated with the handling of rough or sharp objects which could abrade, cut or pierce the skin, such as glass, thin metal sheet and masonry blocks. This standard is intended to assess a glove s ability to protect against mechanical hazards such as cutting. It includes a series of four tests which measure the glove s resistance to abrasion, cutting, tearing and puncture. Throughout this leaflet you will see this 4 = Abrasion Performance Index = Blade Cut Performance Index = Tear Performance Index = Puncture Performance Index 1-4 Gloves must achieve at least Performance Level 1 for abrasion and tear. symbol with four numbers underneath, as shown below. If there is an x instead of a number score this means that the relevant test was not carried out. Choice of coatings Depending on the application and site conditions, the wearer can choose either a PU coating for dexterous handling and great abrasion resistance, or a Nitrile coating, better suited for more robust applications and all round grip. Arco Cut Control colour and number combination - gloves you can trust. * The figure1.2 million days was between 2011 and Peace of mind without the confusion 3

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:55 Page 5 Selecting the right glove Ensuring your workforce is kitted out with an effective cut protection system is absolutely paramount in the

Consisting of a range of six gloves, with two different coatings and three levels of cut protection all conforming to EN388 standard, this high specification system offers tailor-made cut-defence in

This can be quickly carried out by checking the colour of the palm coating as well as the number on the back of the glove.

Colour EN388 Cut Visual Number Coating Applications Resistance Level Arco Cut Control System Red 1 Red 1 1 PU Fine products assembly work Electronics Precision work Warehousing General handling

3 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :55 Page 5 Selecting the right glove Ensuring your workforce is kitted out with an effective cut protection system is absolutely paramount in the fight against hand injury. With the Arco Cut Control System, we ve made it easier than ever to choose the right gloves for the right job. Consisting of a range of six gloves, with two different coatings and three levels of cut protection all conforming to EN388 standard, this high specification system offers tailor-made cut-defence in both damp and dry conditions. Colour and number coded for instant visual identification. This can be quickly carried out by checking the colour of the palm coating as well as the number on the back of the glove. You can be confident not only that the correct glove is being used on site, but that the correct level of protection is being used in the designated areas. Colour EN388 Cut Visual Number Coating Applications Resistance Level Arco Cut Control System Red 1 Red 1 1 PU Fine products assembly work Electronics Precision work Warehousing General handling Automotive Light engineering Construction (dry trades) Transport Red 1 1 Nitrile Warehousing Maintenance Arco Cut Control System Amber 3 Cables and pipework Construction (dry trades) Transport and Haulage Light engineering With the Arco Cut Control System, you can be sure that your workforce can get on with the task in hand whilst minimising exposure to common hand injuries that can hold up projects and cause expensive delays. Amber 3 3 PU Sheet metalwork Warehousing Maintenance Automotive Construction trades Transport Engineering Amber 3 3 Nitrile Materials handling Maintenance Light engineering Automotive Construction trades Engineering Arco Cut Control System Green 5 Green 5 5 PU All day tasks needing Cut 5 protection Automotive Maintenance Construction trades Glass handling Engineering assembling Green 5 5 Nitrile Sheet metalwork Automotive Maintenance Engineering Glass handling Construction 4 Effective cut protection system 5

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:55 Page 7 Red EN 388 Cut Level 1 Protection The cut 1 protection gloves in the Cut Control System provide the lowest level of protection against

Both gloves have the same comfortable knitted liner but you will need to choose the most appropriate coating based on the environment where the gloves will be used, different coatings provide

XL Light and dexterous manual handling glove includes a knitted liner so the wearer benefits from a comfortable and secure fit and a PU coating to provide good grip and abrasion resistance in dry

Will help to reduce minor hand injuries during tasks that may traditionally have used bare hands Lightweight, seamless knitted liner makes the gloves comfortable to help with wearer compliance PU

4 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :55 Page 7 Red EN 388 Cut Level 1 Protection The cut 1 protection gloves in the Cut Control System provide the lowest level of protection against cuts and sharps. Both gloves have the same comfortable knitted liner but you will need to choose the most appropriate coating based on the environment where the gloves will be used, different coatings provide different grip in wet and dry surfaces. PU Red 1 Ref: 14H2000 Sizes: S. M. L. XL Light and dexterous manual handling glove includes a knitted liner so the wearer benefits from a comfortable and secure fit and a PU coating to provide good grip and abrasion resistance in dry conditions. Will help to reduce minor hand injuries during tasks that may traditionally have used bare hands Lightweight, seamless knitted liner makes the gloves comfortable to help with wearer compliance PU coating provides excellent grip and abrasion resistance in dry conditions Dexterous knitted liner provides a close, secure fit White liner with red coloured number one allows for easy visual check to ensure correct level of protection is being worn Fine product assembly work Electronics Precision work Warehousing General handling Automotive Light engineering Construction (dry trades) Transport Nitrile Red 1 EN 388 Cut Level 1 Protection Ref: 14H2300 Sizes: S. M. L. XL Lightweight handling glove with excellent dexterity, comfort and fit and a moisture resistant Nitrile coating to the palm and fingertips - ideal for working in damp conditions. Cut 1 protection helps reduce minor hand injuries during tasks that may traditionally have used bare hands A lightweight, seamless knitted liner makes the gloves flexible and very comfortable helping wearer compliance Nitrile coating provides excellent grip and abrasion resistance in damp conditions Dexterous knitted liner provides a close, secure fit White liner with red coloured number one allows for easy visual check to ensure correct glove is being worn Warehousing Maintenance Cables and pipework Construction (dry and wet trades) Transport & haulage Light engineering Excellent mechanical protection 7

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:56 Page 9 Amber EN 388 Cut Level 3 Protection The cut level 3 gloves in the Cut Control System provide mid level protection against cuts and

Both gloves also provide excellent comfort, value for money and real dexterity. PU Amber 3 4.3.4.2 Ref: 14H2100 Sizes: S. M. L.

provides excellent abrasion resistance in dry conditions White liner with amber coloured number three allows for easy visual check to ensure correct glove is being worn Sheet metalwork Warehousing

5 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :56 Page 9 Amber EN 388 Cut Level 3 Protection The cut level 3 gloves in the Cut Control System provide mid level protection against cuts and sharps. Both gloves are made from high performance cut resistant threads blended with other quality materials which provide abrasion resistance and comfort. Both gloves also provide excellent comfort, value for money and real dexterity. PU Amber Ref: 14H2100 Sizes: S. M. L. XL The seamless knitted liner ensures a comfortable and close fitting glove with cut level 3 protection; there s a PU coating to the palm and fingers which provides excellent abrasion resistance in dry conditions. Mid level cut protection in a lightweight glove for cut 3 protection without additional thickness in a glove Seamless liner provides comfortable protection which will help with compliance PU coating provides excellent abrasion resistance in dry conditions White liner with amber coloured number three allows for easy visual check to ensure correct glove is being worn Sheet metalwork Warehousing Maintenance Automotive Construction trades Transport Engineering Nitrile Amber 3 EN 388 Cut Level 3 Protection This glove offers excellent dexterity, comfort and fit plus extended glove life. The nitrile coating provides excellent abrasion resistance in damp conditions. Mid level cut protection in a lightweight glove provides the benefit of cut 3 protection without additional thickness Dexterous liner which provides a close, secure fit Seamless liner provides comfortable cut 3 level protection which will help with compliance Nitrile coating provides excellent grip and abrasion resistance in damp conditions White liner with amber coloured number three allows, easy visual check ensuring the correct glove Materials handling Maintenance Light engineering Automotive Construction trades Steel erection Ref: 14H2500 Sizes: S. M. L. XL 8 Cut resistant threads 9

ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/2013 12:56 Page 11 Green EN 388 Cut Level 5 Protection The cut level 5 gloves in the Cut Control System provide the highest level of cut

The knitted liner offers outstanding levels of comfort and dexterity. A choice of coating allows the wearer to select the one most suitable for their application.

Offers the highest level of protection against sharps; cut 5, using blended cut resistant fibre technology Dexterous liner provides a close, secure fit Seamless liner provides

easy visual check to ensure correct glove is being worn All day tasks needing Cut 5 protection Automotive Maintenance Construction trades Glass handling Engineering assembling 4.

Rugged Nitrile coating to the palm area gives moisture resistance and hard wearing durability.

compliance Nitrile coating provides excellent grip and abrasion resistance in damp conditions Nitrile palm coating is water resistant to keep your hands dry while you work Dexterous

6 ARC001_08 12pp CUT CONTROL GLOVES repro 21/08/ :56 Page 11 Green EN 388 Cut Level 5 Protection The cut level 5 gloves in the Cut Control System provide the highest level of cut protection available. These gloves offer the best protection from sharps and are made from a blend of high performance cut resistant threads and glass fibres. The knitted liner offers outstanding levels of comfort and dexterity. A choice of coating allows the wearer to select the one most suitable for their application. PU Green 5 Thread technology and PU coating enables even the finest tasks to be completed with the safest level of protection; cut 5. Offers the highest level of protection against sharps; cut 5, using blended cut resistant fibre technology Dexterous liner provides a close, secure fit Seamless liner provides comfortable protection, helping improve compliance PU coating provides excellent grip and abrasion resistance in dry conditions White liner with green coloured number five allows for easy visual check to ensure correct glove is being worn All day tasks needing Cut 5 protection Automotive Maintenance Construction trades Glass handling Engineering assembling Ref: 14H2200 Sizes: S. M. L. XL Nitrile Green 5 EN 388 Cut Level 5 Protection Ref: 14H2600 Sizes: S. M. L. XL Excellent level of cut protection whilst retaining the essential requirements of comfort and dexterity. Rugged Nitrile coating to the palm area gives moisture resistance and hard wearing durability. Offers the highest level of protection against sharps; cut 5, using blended cut resistant fibre technology Seamless liner provides comfortable protection which will help increase compliance Nitrile coating provides excellent grip and abrasion resistance in damp conditions Nitrile palm coating is water resistant to keep your hands dry while you work Dexterous fabric provides a close, secure fit White liner with green coloured number five allows for easy visual check to ensure correct glove is being worn Warehousing Maintenance Cables and pipework Construction (dry and wet trades) Transport & haulage Light engineering Sheet metalwork Automotive Maintenance Engineering Glass handling Construction 10 Choice of coatings 11

CUT CUT. Mechanical Risks. Overview of cut protection

CUT CUT. Mechanical Risks. Overview of cut protection Overview of cut protection As a glove specialist, effectively protecting the hands from cut injuries is one of uvex s most important tasks. Precision All-round Heavy duty For many years, uvex has concentrated