Compact Push-On Fittings
|
|
|
- Reynold Ramsey
- 6 years ago
- Views:
Transcription
1 4" - 24" DUIE IRON PUS-ON OIN OMP FIINGS GENER SPEIFIIONS Utility Pipe Fittings and ccessories NSI/WW 153/21.53 Material: Pressure: esting: Ductile iron per SM PSI rating for 4" - 24" sizes. Pressure rating applies to fittings only and does not apply to restraining lugs or external restrainers In accordance with NSI/WW 153/21.53 and U requirements aying ength: In accordance with NSI/WW 153/21.53 (fittings not listed in NSI/WW have dimensions per Star design as noted in the catalog) Weights: Flanges: ement ining: oating: re in pounds, unless noted otherwise and do not include accessories, cement lining and coating Flanged ends on fittings match NSI/WW 115/21.15 and NSI 16.1 class 125 flanges In accordance with NSI/WW 104/ sizes 4" - 24" double thickness sphaltic seal coat inside and out in accordance with NSI/WW 104/21.4 and referenced in NSI/WW 153/21.53 Gaskets: Dual hardness SR in accordance with NSI/WW 111/21.11 (see pg. 37) pprovals: Dimensions: 4" - 12" Underwriters aboratories isted. Please consult factory for detail listing and approvals. 4" and greater are U/NSF-61 ll dimensions are in inches unless noted otherwise. D D 7/8 DI. 2 OES MEMER 7/8 DI. 2 OES Ø.. Ø.. 4"-12" S 14"-24" S PUS-ON OIN DIMENSIONS Ø.. D Please note: ll fittings are standard with two (2) restraining lugs. ends 45 & 90 in sizes 4" -12" are also available with four (4) restraining lugs. U REGISERED RDEMRK OF SR PIPE PRODUS Page 31 SR PIPE PRODUS OUSON ORPORE O FREE FX
2 Utility Pipe Fittings and ccessories NSI/WW 153/21.53 po x po bends 90º po x po ends (¼) W 45º po x po ends (⅛) W 22 ½º po x po ends ( ) W 11 ¼º po x po ends ( ) W po x pe bends 90º po x pe ends (¼) W 45º po x pe ends (⅛) W 22 ½º po x pe ends ( ) W 11 ¼º po x pe ends ( ) W po x tapped cross t MX. tap W hreads in ccordance with NSI/SME po x tapped EE t MX. tap W hreads in ccordance with NSI/SME U REGISERED RDEMRK OF SR PIPE PRODUS SR PIPE PRODUS OUSON ORPORE O FREE FX Page 32
3 Utility Pipe Fittings and ccessories NSI/WW 153/21.53 po x FE bends 90º po x FE ends (¼) W 45º po x FE ends (⅛) W 22 ½º po x FE ends ( ) W 11 ¼º po x FE ends ( ) W po x po tees (on t) po x po tees 1 W 4 x x x x x x x x x x x x x x x x x x x (on t) W 16 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x U REGISERED RDEMRK OF SR PIPE PRODUS Page 33 SR PIPE PRODUS OUSON ORPORE O FREE FX
4 Utility Pipe Fittings and ccessories NSI/WW 153/ po x FE tees W 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x po x pe tees W 6 x x x po laterals Y Y 1 t t1 a y W 4 x x x x x x x x x x x x x x x x x x x x x x x x U REGISERED RDEMRK OF SR PIPE PRODUS SR PIPE PRODUS OUSON ORPORE O FREE FX Page 34
5 Utility Pipe Fittings and ccessories NSI/WW 153/ po crosses t t1 W 4 x x x x x x x x x x x x x x x x x x x x x x PO REDUERS t1 PO x PO PO x FE FE x po W W 6 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x W po x FNGE DPER t W po small end bell (seb) reducer t t1 W 6 x x x x U REGISERED RDEMRK OF SR PIPE PRODUS Page 35 SR PIPE PRODUS OUSON ORPORE O FREE FX
6 Utility Pipe Fittings and ccessories NSI/WW 153/ PO PS & PUGS (SOID OR PPED) MX. W P PS PUGS hreads in ccordance with NSI/SME po x swivel hydrant tees W 6 x x x x x x x PO GSKES PO RNSIION GSKES U REGISERED RDEMRK OF SR PIPE PRODUS SR PIPE PRODUS OUSON ORPORE O FREE FX Page 36
7 Utility Pipe Fittings and ccessories Standard Push-On oint Gaskets (SR, NR, EPDM, Neoprene, FKM) NSI/WW 111/21.11 GSKE GENER SPEIFIIONS Star Pipe Products Push-On Gasket dimensions conform to the requirements for yton style bells. Gasket markings include size, Manufacturer s mark, ountry of origin and product identification. No markings are positioned on sealing surfaces per the NSI/WW 111/21.11 standard. Push-on ransition gaskets follow the requirements of NSI/WW 111/21.11 where applicable. Standard gasket material is vulcanized styrene butadiene rubber (SR). Special application elastomers (EPDM, Nitrile, Neoprene & FKM) are available and shall be identified on all documentation and corresponding gaskets. Star Pipe gaskets are manufactured under quality control standards and procedures that are maintained by the gasket supplier. ppropriate documentation is maintained by the manufacturer and available for review upon request. Star Pipe gasket suppliers maintain a quality assurance program and manual that is reviewed and updated on an ongoing basis to ensure product quality. Star Pipe gasket suppliers perform in house testing and submit to random testing by Underwriters aboratories, Inc. Star Pipe gasket providers are recognized under the component program (U 194/ U 157) of Underwriters aboratories, Inc. Star Pipe provides that our Push-On gaskets for potable or wastewater projects will perform as designed, based on the published chemical and environmental resistance data for "generic" rubber compounds. Star Pipe should be consulted for specific recommendations or for unusual applications. gasket properties Property SM ES MEhod Main body EE ardness, Shore "" D ±5 83±5 Minimum ensile D PSI 1200 PSI Minimum Elongation D % 125% Minimum ging D573 60% --- Maximum ompression Set D395, Method 20% --- Resistance to Surface Ozone racking D1149 No racking --- GSKE type SR (Styrene utadiene Rubber/ una-s) Maximum ONINuous temp 150 F SNdard usage Drinking Water, Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Not Recommended for ydrocarbon Service EPDM (Ethylene Propylene) 212 F lcohols, Dilute cids, Dilute alkalis, Ketones (MEK/cetone), Strong Oxidizing hemicals; Drinking Water, Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Not Recommended for ydrocarbon Service Neoprene (Polychlorprene / R) 200 F ydrocarbons, Unrefined Petroleum Products, Greasy Waste; Salt Water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. Nitrile (NR / una-n) 150 F Refined Oils and Fluids, Fats, Greases and Waste; Drinking water, Sanitary Sewage, Reclaimed Water, Raw Water, Storm Water. FKM (Flouroelastomer / Viton ) 212 F romatic ydrocarbons, hlorinated ydrocarbons, Vegetable Oils, most hemicals; Drinking Water, Reclaimed Water, Raw Water, Storm Water. U REGISERED RDEMRK OF SR PIPE PRODUS Page 37 SR PIPE PRODUS OUSON ORPORE O FREE FX
Compact Push-On Fittings
4" - 24" DUCIE IRON PUS-ON OIN COMPC FIINGS GENER SPECIFICIONS MERI: PRESSURE: ESING: Ductile iron per SM 536 350 PSI rating for 4" - 24" sizes. Pressure rating applies to fittings only and does not apply
RUBBER COMPOUNDS. Talk to one of our Application Experts Phone: Web:
RUBBER COMPOUNDS This PDF lists the main types of rubber compound we stock. For further details on any of these compounds, please contact our sales department. Silicone Rubber........ 2 SBR (Red Rubber)........
Paper, Cork & Rubber. Sheet Material. Telephone : Fax : E- mail :
Paper, Cork & Rubber 165 Paper, Rubber & Cork Gasket Materials Rubber, cork and paper-based gasket materials offer a low cost sealing solution for applications where the additional strength offered by
Effective Date: Revision #: 1. Section H: Repair Sleeves, Couplings, Clamps & Non-Pressure Adapters. Pipe Adapters, Non-Pressure
Section H: Repair Sleeves, Couplings, Clamps & Non-Pressure Adapters H 1 Pipe Adapters, Non-Pressure H 1.2 Pipe Adapters, Concrete Manhole Connection Boots: H 2 H 3 H 4 H 5 Repair Clamps/ Ductile Iron
Connexion Developments Ltd + Solenoid Valves (UK) Ltd Unit 3, Rainbow Court, Armstrong Way, Great Western Business Park, Yate, Bristol, BS37 5NG,
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 THERMOPLASTICS & ELASTOMERS ABS Acrylonitrile Butadiene Styrene Class 32222 conforming to ASTM D3965 is a time-proven material. The smooth
Section B: Fittings and Accessories Effective Date: Revision #: 1
B 1 PVC Fittings - Schedule 40 B 2 PVC Fittings - Schedule 80 B 3 HDPE Flange & Mechanical Joint Adapters (AWWA C 906) B 4 B 5 HDPE Pipe Wall Stiffeners Plastic Fittings (SDR-21) B 6 PVC Fittings - Gasketed
SECTION 2. AMERICAN Pipe Joints
SECTION 2 AMERICAN Pipe Joints AMERICAN Joints for Pipe and Fittings AMERICAN Fastite Joint, 4"-64" The AMERICAN Fastite Joint, furnished in sizes 4-64, is a flexible, rubber ring compression-type joint
WEKO-SEAL Internal Joint Sealing. internal pipe-joint sealing
WEKO-SEAL Internal Joint Sealing internal pipe-joint sealing We know seals inside and out. Retaining Band Test Valve WEKO-SEAL WEKO-SEAL is the leading trenchless system for internally and economically
SECTION SANITARY UTILITY SEWERAGE PIPING
SECTION 33 31 00 SANITARY UTILITY SEWERAGE PIPING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Sanitary sewer pipe and fittings. 2. Underground pipe markers. 3. Connection to existing manholes. 4.
Watertight solutions that last
TRELLEORG PIPE SELS Watertight solutions that last The best Sealing Solutions for Plastic Pipes 1 Introducing Trelleborg Pipe Seals Trelleborg Pipe Seals is a leading supplier of pipe seals and repair
Combination Air Valves - Stainless Steel/ Sanitary Sewer/ For 2 Thru 12 Mains
D 1 D 1.1 D 1.2 D 1.3 D 1.4 D 1.5 D 2 D 3 D 3.1 D 3.2 D 4 D 4.1 D 5 D 6 D 7 D 8 Valves- Resilient Seat/ 2 (FIPT X FIPT) Valves - AWWA C509/ Resilient Seat/ 2 Thru 12 (MJ X MJ) Tap Valves - AWWA C509/ Resilient
APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS
BULLETIN 9000.00-2 SEPTEMBER 2015 APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS Materials of Construction DUCTILE IRON BODY Item Description Material A1 Body Ductile Iron, ASTM A536 A2
NATURAL RUBBER (NR) Temperature Range (dry heat)
NATURAL RUBBER (NR) Natural rubber is a product coagulated from the latex of the rubber tree, hevea brasiliensis. Natural rubber features compression set, tensile strength, resilience, abrasion and tear,
General Service Butterfly Valves. Series 120, 140, 160, 300
General Service Butterfly Valves Series 0, 0, 0, 00 Av-Tek Butterfly Valves Concentric Series Technical Data Size Range: Series 0 - " to " Wafer Series 0 - " to 0" Lug Series 0 - " to " Flanged Series
Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe
F 1 F 1.1 F 1.2 F 2 F 2.1 F 3 Service Saddles/ Hinged Type for 2 PVC Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe Service Saddles/ Ductile Iron/ Stainless Steel Straps
Rubber Material Selection Guide Nbr Nitrile Or Buna N
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with rubber material selection
TOTAL PIPING SOLUTIONS, INC. Quick Cam. Rapid Seal Repair Clamp. Patent Pending Technical Specifications
TOTAL PIPING SOLUTIONS, INC. Quick Cam Rapid Seal Repair Clamp Technical Specifications Rev B July 2017 1. Pressure Rating: Quick Cam Rapid Seal Repair Clamps by when properly installed are capable of
SECTION CARTRIDGE-LOADED, RESTRAINED JOINT POLYVINYL CHLORIDE PIPE
SETION 15066 RTRIGE-LOE, RESTRINE JOINT POLYVINYL HLORIE PIPE PRT 1 GENERL 1.01 ESRIPTION SOPE 1. This section specifies cartridge-loaded, restrained joint polyvinyl chloride pipe, including standards
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
EXHIBIT D SEACOAST UTILITY AUTHORITY 4200 HOOD ROAD PALM BEACH GARDENS, FL (PHONE: ) "SHOP" SPECIFICATIONS
EXHIBIT D SEACOAST UTILITY AUTHORITY 4200 HOOD ROAD PALM BEACH GARDENS, FL 33410 (PHONE: 561-627-2900) "SHOP" SPECIFICATIONS Project Name: Concurrence of Utility Contractor: Signature Date Firm Concurrence
KENNEBUNK, KENNEBUNKPORT & WELLS WATER DISTRICT MATERIAL SPECIFICATIONS 10/11/2018
KENNEBUNK, KENNEBUNKPORT & WELLS WATER DISTRICT MATERIAL SPECIFICATIONS 10/11/2018 The following material specifications section is intended to apply to ALL new construction, both public and private. For
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
RUBBER MATERIAL COMMERCIAL and MIL SPEC
RUBBER MATERIAL COMMERCIAL and MIL SPEC NEOPRENE BUNA-N FDA BUNA-N VITON EPDM SILICONE CLOTH INSERTED RUBBER NYLON INSERTED RUBBER RED RUBBER PURE GUM CLOSED CELL SPONGE OPEN CELL SPONGE CORK and RUBBER
Effective Date: Revision #: 1. Section A: Pipe. A 1 PVC Pipe - Schedule 40. A 2 PVC Pipe - Schedule 80. Polyethylene Service Tubing
A 1 PVC Pipe - Schedule 40 A 2 PVC Pipe - Schedule 80 A 3 A 3.1 A 3.2 A 4 Polyethylene Service Tubing Polyethylene 2 Potable Water Main Tubing High Density Polyethylene Pipe (HDPE) PVC Pipe (2 SDR-21)
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS Pipe material used to construct, repair or modify sewers shall conform to the specifications within this Section. 1.0 Clay Pipe Construction of clay
All definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
SPECIFICATIONS - DETAILED PROVISIONS Section Plastic (PVC) Pressure Water Pipe & Fittings C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 15064 - Plastic (PVC) Pressure Water Pipe & Fittings C O N T E N T S PART 1 - GENERAL... 1 1.01 REQUIREMENT... 1 1.02 DELIVERY... 1 1.03 QUALITY ASSURANCE...
PRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
SECTION 7 SEPARATION OF WATER MAINS AND SANITARY SEWERS
SECTION 7 SEPARATION OF WATER MAINS AND SANITARY SEWERS To prevent the contamination of the public water supplies from nearby sanitary sewers, the following State Water Resources Control Board Division
***************************************************************************************************************
02732 SANITARY FORCE MAIN *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 33 34 00. ***************************************************************************************************************
SECTION WATER UTILITIES
SECTION 33 10 00 PART 1 - GENERAL 1.1 DESCRIPTION: Underground water distribution system complete, ready for operation, including all appurtenant structures, and connections to both new building service
Materials. Butyl Rubber. Description. Composition. Physical Properties*
Materials Listed below is an overview of commonly specified rubber compounds. As such, the information presented here is necessarily general in nature and abbreviated. However, Kelseal Rubber Pty Ltd not
EMKA (UK) Ltd Patricia House Bodmin Road Coventry CV2 5DG West Midlands, England
EMKA (UK) Ltd Patricia House Bodmin Road Coventry CV DG West Midlands, England Tel: +(0) 7 0 Fax: +(0) 7 87 Info@emka.co.uk www.emka.co.uk E-mail: info@emka-profiles.co.uk
McWANE. SIZES - 4" to 36"
McWNE S - 4" to 36" 4" - 36" DUCILE IRON PIPE MERIL Ductile Iron per WW C150/NSI 21.50, WW C151/NSI 21.51, SM 536 PRESSURE 350 PSI Water Workg Pressure 4" - 24" & 250PSI FOR 30 & 36" ESING LYING LENGH
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
General Service Butterfly Valves. Series 120, 140, 160, 300
General Service utterfly Valves Series 0,,, 00 v-tek Resilient Seated utterfly Valves Technical Data Size Range: Series 0 - " to " Wafer Series - " to 0" Lug Series - " to " Flanged Series 00 - " to "
Pipes & Fittings.
Pipes & Fittings 0036 Content Perface... 1 Certificates... 2 Advantages of Ductile Iron Pipes... 3 Application Areas of Ductile Iron Pipes... 3 Technical Speccification od Ductile Iron Pipe Fittings...
Rubber 101: How to Choose Elastomers
While there are many formulations or recipes of rubber available, the following text contains essential information to assist you in choosing the elastomer that will work best for your project. If you
MATERIAL CHART THE WORLD OF RUBBER. Basic Rubber Properties
MATERIAL CHART Basic Rubber Properties POLYNORBORNENE RUBBER POLYNORBORNENE PNR NORSOREX, NSX 15NA, NSX 15NB ETC. This rubber is generally used for special applications where a very soft material is required.
Series 1100 Mechanical Joint Restraint for Ductile Iron Pipe
MEGALUG Series 1100 Mechanical Joint Restraint for Ductile Iron Pipe Features and Applications: Sizes 3 inch through 54 inch Constructed of ASTM A536 Ductile Iron Torque Limiting Twist-Off Nuts Nominal
DUKE UNIVERSITY CONSTRUCTION STANDARDS
1 33 11 00 Water Utility Distribution Piping 1. Introduction A. Duke University owns and operates the water distribution system throughout the campus boundaries; however, water is supplied by the City
Wafer and Lug style resilient seated butterfly valves with cartridge seat design.
Wafer and Lug style resilient seated butterfly valves with cartridge seat design. FEATURES AND BENEFITS Suitable for high pressure and full vacuum service due to the use of a cartridge seat design. Triple
Rubber Boots and Bellows
Rubber Boots and Bellows Engineering Information and Product Specifications A Myers Industries Company Rubber Boots and Bellows Buckhorn Rubber manufactures a wide range of quality, injection-molded rubber
Sheet Rubber Products
Sheet Rubber Products Trelleborg Sheet Rubber Products Trelleborg are specialists in Polymer Technology and are one of the world s leading suppliers of high grade, quality RUBBER SHEETING. Our products
Effective Date: Revision #: 1. Section K: Miscellaneous. Casing Insulators/ Stainless Steel. Polyethylene Encasement.
K 1 K 2 K 3 K 4 K 5 K 6 K 7 K 8 K 9 Casing Insulators/ Stainless Steel Polyethylene Encasement Manhole Inserts Pipe Saddle Support/ Valve Vaults/ Adjustable Cylindrical Wall Seals & Line Sleeves Metal
Rubber Washers & Spacers
http//:www.rubbersealing.com E-mail: sales@rubbersealing.com, MSN: towerpacking@hotmail.com Rubber Washers & Spacers Rubber Washers & Spacers Multi purpose rubber washers and spacers designed to satisfy
Rubber Bearings. Rubber Bearings Rubber bearings mainly used for pump shafts. Bearings with metal housing (shell) are also available
http//:www.rubbersealing.com E-mail: sales@rubbersealing.com, MSN: towerpacking@hotmail.com Rubber Bearings Rubber Bearings Rubber bearings mainly used for pump shafts. Bearings with metal housing (shell)
Section POLYVINYL CHLORIDE PIPE. B. Polyvinyl chloride sewer pipe for gravity sewers in nominal diameters 4 inches through 60 inches.
PART 1 GENERAL 1.01 SUMMARY This Section includes: Section 02506 A. Polyvinyl chloride pressure pipe for water transmission and distribution, in nominal diameters 4 inches through 30 inches. B. Polyvinyl
All definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
Husky 307 Polypropylene AOD Pump
Husky 307 AOD Pump Please Contact Us With Any Questions 604 988 7151 sales@cpesystems.com www.cpesystems.com Husky 307 Plastic Pumps Technical Specifications Husky 307 Plastic Pumps Acetal Maximum fluid
Contents. dimensions and weights external loads deflection and testing installation...17
GRAVITY SEWER Contents 01 02 03 04 05 06 07 08 09 product description...2 short form specification...5 dimensions and weights....................... 6 flow/discharge charts....................... 8 external
Elastomeric / Polymer Sheetings & Jointings
Elastomeric / Sheetings & Jointings Page 2 Table of Contents and information Sheetings & Jointing's Page 3 Information Page - Materials Page 4 New and Speciality grades and services Page 5-6 NR / SBR general
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO. Alan Andreani, Ed. D. Mayor of Alliance
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO 2016 Alan Andreani, Ed. D. Mayor of Alliance Mike Dreger, Director Public Safety & Service GENERAL TERMS AND CONDITIONS 1. Special
SECTION POLYVINYL CHLORIDE (PVC) PRESSURE PIPE
SECTION 02622 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE PART 1 - GENERAL 1.1 SCOPE A. The work covered by this section includes furnishing all labor, equipment, and materials required to install and test
PIPE AND FITTINGS. Submit product information sheet for joint restraint system to be used.
PIPE AND FITTINGS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe B. Fittings C. Special Fittings D. Pipeline Accessories 1.02 DESCRIPTION OF WORK Construct water mains and building service pipes. 1.03
SUPPLEMENTAL SPECIFICATIONS TO STANDARD SPECIFICATIONS FOR WATER MAIN AND SERVICE LINE INSTALLATION NO. 2611
Revised October 10, 2014 SUPPLEMENTAL SPECIFICATIONS TO STANDARD SPECIFICATIONS FOR WATER MAIN AND SERVICE LINE INSTALLATION NO. 2611 Water Main and Service Line Installation shall be in accordance with
INDUSTRY LEADER STATE-OF-THE-ART DESIGN AND MANUFACTURING CUSTOMER SUPPORT TITAN CUSTOM MADE HOSE...MANUFACTURED TO YOUR SPECIFICATIONS
TITAN CUSTOM MADE HOSE...MANUFACTURED TO YOUR SPECIFICATIONS INDUSTRY LEADER Titan Industries is proud to be the largest full-service Custom Made Hose manufacturer in the United States. Titan specializes
Model Specifications for Sclairpipe High Density Polyethylene (HDPE) Pipe
This publication is intended for use as a guide to support the designer of piping systems. The recipient is encouraged to independently verify all information and agrees that such information is not to
60W - Wafer style resilient seated butterfly valve 60L - Lugged style resilient seated butterfly valve Cartridge Seat Design
60W - Wafer style resilient seated butterfly valve 60L - Lugged style resilient seated butterfly valve Cartridge Seat Design Features and Benefits Suitable for high pressure and full vacuum service due
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER WATER MAIN 1. All open cut water main shall be polyvinyl chloride plastic (PVC) pressure pipe per AWWA specification
CHAPTER 8 WATER SUPPLY SYSTEM
CHAPTER 8 WATER SUPPLY SYSTEM 8-1 INTRODUCTION These improvement standards shall govern the engineering design of all domestic water systems intended for operation and maintenance by the County of Sutter
VALLECITOS WATER DISTRICT SECTION POLYVINYL CHLORIDE (PVC) PRESSURE PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. This section designates the requirements for the manufacture and installation of polyvinyl chloride, abbreviated PVC, pressure pipe. 1.2 RELATED WORK SPECIFIED ELSEWHERE
E D I T I O N XTRA FLEX 4"-24" RESTRAINED JOINT HIGH DEFLECTION FITTINGS
4"-24" FOR WATER & WASTEWATER, & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Coupling and Fittings 3 Coupling Diagram 4 Reducer 5 350 psi Working ressure 90º Bends 6 45º Bends 7 22 1/2 Bends 8
S U B M I T T A L T R A N S M I T A L
3679 S Huron Street, Suite 404 Englewood, Colorado 80110 Phone: (303) 789-4111 FAX: (303) 789-4310 S U B M I T T A L T R A N S M I T A L PROJECT: ENGINEER: OWNER: CONTRACTOR: Harold Thompson Regional WRF
This section includes materials and installation of ductile-iron pipe and fittings for potable and recycled water systems.
NORTH MARIN WATER DISTRICT STANDARD SPECIFICATIONS SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS PART 1 GENERAL 1.01 DESCRIPTION This section includes materials and installation of ductile-iron pipe and
ARTICLE 26 UTILITY LINE INSTALLATION REQUIREMENTS
UTILITY LINE INSTALLATION REQUIREMENTS Index 26.01 JACK AND BORE OPERATIONS 26.02 PRESSURE PIPE RESTRAINT 26.03 PRESSURE CONNECTION BACK TO TABLE OF CONTENTS Section 26.01 JACK AND BORE OPERATIONS 26.01.01
Catalogue. Celullar rubber
Catalogue Celullar rubber About cellular rubber Cellular rubber, sponge rubber and foam rubber are all classified as foamed elastomers. Cellular rubber can be used for water, air and oil seals. It is often
Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
INVITATION FOR BIDS DUCTILE IRON PIPE CITY OF LEBANON AUTHORITY LEBANON, PA
INVITATION FOR BIDS DUCTILE IRON PIPE CITY OF LEBANON AUTHORITY LEBANON, PA Sealed proposals will be received by the City of Lebanon Authority until 1:30 p.m. prevailing time on Tuesday, October 30, 2018
AMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPE AND FITTINGS FOR WASTEWATER SYSTEMS IGC 270-2008 1. PURPOSE 1.1
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
PVC PRESSURE FITTINGS
GUIDE FOR PVC PRESSURE FITTINGS TABLE OF CONTENTS Introduction 3 Standards and Specifications 3 Products 4 Manufacturing Methods 8 Fabricated Fittings 8 Injection-Molded Fittings 9 Machined Couplings 9
SECTION 2100 WATER MAIN
SECTION 2100 WATER MAIN WATER MAIN PART 1 GENERAL 1.01 Section Summary A. This section includes product and installation requirements for water main pipe, gate valves, hydrants, fittings, and miscellaneous
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.
EPDM RUBBER AND IT S BENEFITS EPDM RUBBER AND IT S BENEFITS
INDIAN RUBBER MANUFACTURERS RESEARCH ASSCOCIATION Affiliated to Ministry of Commerce & Industry GOVT. OF INDIA EPDM RUBBER AND IT S BENEFITS EPDM RUBBER AND IT S BENEFITS Suchismita Sahoo Assistant Director
MECHANICAL JOINT PIPE
3"-24" DUCTILE IRON FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 866.DI.IE 2 Table of Contents Mechanical Joint ipe 3 Assembly of Mechanical Joint ipe 4 Technical Information 5 U.S. IE
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
Series 2000PV Mechanical Joint Restraint for PVC Pipe
Series 2000PV Mechanical Joint Restraint for PVC Pipe Features and Applications: For restraining plain end PVC pipe at mechanical joint fittings and appurtenances Sizes 3 inch through 36 inch Sizes 42
DIAPHRAGM VALVES b y H a k o h a v V a l v e s
b y H a k o h a v V a l v e s DIAPHRAGM VALVES by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who set their goal to become
Straightway Valves. Sec 2: Products. Dia-Flo Diaphragm Valves /15
Features and Benefits Ideal for slurry, abrasive and corrosive applications, the Dia-Flo Straightway Diaphragm Valve provides the following benefits: Slurry Applications Due to the streamlined fluidpassage,
PMG LISTING CRITERIA FOR STRUCTURAL ADHESIVE JOINING SYSTEMS FOR FITTINGS PREFACE
www.icc-es.org/pmg (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council PMG LISTING CRITERIA FOR STRUCTURAL ADHESIVE JOINING SYSTEMS FOR FITTINGS Approved March 2009 (Editorially
Bellofram Silicones Inc Ohio River Boulevard Newell, West Virginia Toll-free: Fax:
TM Silicones Bellofram Silicones Inc. 8019 Ohio River Boulevard Newell, West Virginia 26050 www.belloframsilicones.com Bellofram Closed Cell Silicone Sponge Extrusion Products Bellofram Silicones closed
NOTICE OF INTENT TO USE THE GENERAL PERMIT FOR CONSTRUCTION OF WATER MAIN EXTENSIONS FOR PWSs
NOTICE OF INTENT TO USE THE GENERAL PERMIT FOR CONSTRUCTION OF WATER MAIN INSTRUCTIONS: This notice shall be completed and submitted by persons proposing to construct projects permitted under the "General
7. Allowable Fittings.
7. Allowable Fittings. a. General Requirements. 1) The fittings listed in this section are generally the allowable fittings for the design of DIP and PVC pipe. For steel pipe and fittings, see Part One,
UNIVERSITY OF MISSOURI Hydronic Energy Distribution 2016 Q1
GENERAL: The scope of this document is to provide instruction for the installation and testing of chilled water piping installed for the University of Missouri. DESIGN GUIDELINES: 1. Materials 1.1. Pipe
BALL VALVE SEAT MATERIALS AND APPLICATIONS
BALL VALVE SEAT MATERIALS AND APPLICATIONS Virgin PTFE(Polytetrafluoroethylene) PTFE or TFE (Teflon ) is a fluorocarbon based polymer and typically is the most chemically- resistant of all plastics while
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT
2 5 0 P. S. I. G. AMERICAN DARLING 5 1 /4" B-84-B FIRE HYDRANT CONSTRUCTION OPERATING NUT-cast one piece bronze operating nut. Design of the operating thread permits slow closing of the hydrant valve,
DUCTILE IRON PIPE AND FITTINGS
Section 02501 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Ductile iron pipe and fittings for water lines, wastewater force mains, gravity sanitary sewers, and storm sewers. 1.02 MEASUREMENT AND PAYMENT
Husky 716 Aluminum. Please Contact Us With Any Questions
Husky 716 Aluminum Please Contact Us With Any Questions 604 988 7151 sales@cpesystems.com www.cpesystems.com Husky 716 Metal Pumps Air-Operated Double Diaphragm Ordering Information D X X X X X Diaphragm
Sheet Rubber Products Index
Products Index Rubber Type Oil Res. Abrasion Res. Thickness Width Tensile Duro "A" Temp. "C" Colour Page AASHTO Natural Poor Good 48 3000 60 Black 06-07 Butyl Poor Good 1/16,1/8 48 1000 60-34 C to 100
VIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.
Page 635.1 Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Operating 1: Series 8124A Model H8124A Nominal Flow Temp. 2 Viscosity (GPM) 15-200 (M 3 /hr.) 3.4-45 (PSI) To 200 PSI (Bar) To 14 Bar (
Aero s experienced sales engineers stand ready to guide you towards the best solution for your specific requirements.
While there are many formulations or recipes of rubber available, the following text contains essential information to assist you in choosing the elastomer that will work best for your project. If you
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
Sclairpipe VERSATILE HIGH DENSITY POLYETHYLENE PIPE
Sclairpipe VERSATILE HIGH DENSITY POLYETHYLENE PIPE Sclairpipe Sclairpipe high density polyethylene (HDPE) pipe represents the latest advances in both material and manufacturing techniques. Since 1968,
SECTION FACILITY SANITARY SEWERS
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Gravity-flow, non-pressure sanitary sewerage outside the building, with the following components: 1.02 DEFINITIONS 1. Cleanouts. 2. Precast concrete manholes.
SECTION 18. AMERICAN General Index
SECTION 18 AMERICAN General Index General Index A Abbreviations Organizations...1-1 Standard, American...17-23 Abrasion Resistant Pipe...12-12 Accessories (See Joint Materials) American Flow Control Valves
PRODUCT GUIDE. C.A. Baldwin & Co Ltd. Quality is our strength
PRODUCT GUIDE C.A. Baldwin & Co Ltd Quality is our strength INDEX Expansion / Anti-vibration Couplings Pages 1 7 Repair Bandage Page 8 Fixing and Repair Clamps Pages 9 19 Compression Fittings for Steel
SPECIFICATIONS FOR PIPE JOINT RESTRAINT SYSTEMS Revised April 2010
95-10 San Antonio Water System San Antonio, Texas 1. SCOPE SPECIFICATIONS FOR PIPE JOINT RESTRAINT SYSTEMS Revised April 2010 This specification covers pipe joint restraint systems to be used on domestic