AXIOM Perimeter Trim. Straight and curved options. More than 17 different profiles and visuals 7-1. For more information call ARMSTRONG

Transcription

1 AXIOM Perimeter Trim The Axiom family of products provide functional and visual options in ceiling design. Extruded aluminum offers clean, crisp details Straight and curved options More than 17 different profiles and visuals 7-1

2 AXIOM-Classic profiles 7-13/ Minimum Bend Radius For Axiom-Classic 2, 4, 6, 8 profile 24 minimum 10 profile 36 minimum 12 profile 72 minimum 3-7/8 5-13/ /16 2 Axiom 4 Axiom 6 Axiom 8 Axiom 10 Axiom 12 Axiom 7-2

3 AXIOM-Classic accessories AXHGC AXTBC Axiom Drywall Bottom Trim (For 5/8 Gypsum Board) Hold Down Clip- AX-SPT-HDC AX2HGC AXSPLICE Axiom Splice Plate - (90 Corner Shown) Axiom Perimeter Trim Axiom Perimeter Trim AX4SPLICE 7-3

4 AXIOM-Classic Paired Unique system allows tandem sections of curved or straight Axiom to run parallel with a 5/8 or 1-3/8 reveal between profiles Hanging Bracket for 5/8 reveal (AXPHANG58) Hanging Bracket for 1-3/8 reveal (AXPHANG118) NOTES: For all 4, 6 or 8 profiles, stack two Hanging Brackets on top of each other and place every 4 on center. Paired sections less than 4 long require two sets of Hanging Brackets per section. Paired AXIOM-Classic available in 2, 4, 6 or 8 profiles 7-4

5 AXIOM-Knife Edge profiles 2-5/16 Axiom-Knife Edge For Vector for the unique Vector panel edge detail 1/2 5-9/16 2-1/2 Axiom-Knife Edge for traditional acoustical lay-in panels or drywall 6 7-5

6 AXIOM-Knife Edge details AX-V-TBC Axiom-Knife Edge For Vector with Vector panel Knife Edge AXIOM for Vector Knife Edge AXIOM Axiom-Knife Edge with Tegular panel Modified AXTBC Tegular Panel 7-6

7 AXIOM-Knife Edge with Drywall detail (Knife Edge with AX-V-TBC Connector Clip and AXDWT) 7-7

8 AXIOM-Knife Edge accessories Factory-assembled corner configurations available º (upon request) 12" AXTBC Knife Edge AXIOM Splice Plate (AX4SPLICE) T-Bar Connector Clip (AXTBC) AXIOM-Knife Edge Inside Corner 135º Corner Alignment Clip (AXKEALIGN) Axiom-Knife Edge with AX2HGC for single panel installation AXIOM-Knife Edge Outside Corner 60º Corner 7-8

9 AXIOM-Profiled Convex, Concave, Cove and Crown profiles AXCNVX Convex Axiom-Profiled 2-1/2 3-1/ /4 3-1/2 3-1/2 2-1/2 AXCNCV Concave Axiom-Profiled AXCOVE - Cove Axiom-Profiled AXCRWN - Crown Axiom-Profiled 5-1/4 7-9

10 AXIOM-Profiled accessories AXDWT - Axiom-Profiled Drywall Trim AXCNVX - Convex Axiom-Profiled Factory-welded corner configurations available º (upon request) AXCNVX - Convex Axiom-Profiled AXDWT - Axiom-Profiled Drywall Trim 12" Convex Outside Corner 135º Corner AXTBC - Axiom Tee Bar Connector Clip AXCNVX - Convex Axiom-Profiled AX4SPLICE - Splice Plate Convex Inside Corner 60º Corner 7-10

11 AXIOM-Transitions Tegular panel to drywall perimeter profile 1-1/2 2-9/16 5/8 1-1/16 Axiom-Transitions Tegular is available curved and straight with field cut perimeter panels AXIOM Transition from Tegular to drywall application 7-11

12 AXIOM-Transitions Vector panel to drywall perimeter profile 1-1/2 2-9/16 1/2 5/8 1-1/16 Axiom-Transitions Vector is available straight only for use with full size Vector panels (field cutting Vector panels can be avoided) AXIOM Transition from Vector to drywall application 7-12

13 AXIOM-Transitions accessories T-Bar Connector Clip (Tegular to drywall) (AXTBC) AXIOM Transition from Tegular to Drywall AXTBC Splice Plate (AX4SPLICE) AXIOM Transition from Vector to Drywall AXTBC T-Bar Connector Clip (Vector to drywall) (AXTBC) 7-13

14 AXIOM-Vector profiles 5-13/16 2-7/16 4 Axiom Vector application 1/2 1/2 1/2 2 Axiom-Vector 4 Axiom-Vector 6 Axiom-Vector 7-14

15 AXIOM-Vector corners 12 Axiom-Vector Inside Corner Axiom-Vector Outside Corner with (AXSPLICE) Splice Plate NOTE: Corners are shipped flat, formed on site. 7-15

16 AXIOM-Vector Paired Unique system allows tandem sections of curved or straight Axiom to run parallel with a 5/8 or 1-3/8 reveal between profiles Hanging Bracket for 5/8 reveal (AXPHANG58) Hanging Bracket for 1-3/8 reveal (AXPHANG118) NOTES: For all 4, 6 or 8 profiles, stack two Hanging Brackets on top of each other and place every 4 on center. Paired sections less than 4 long require two sets of Hanging Brackets per section. Paired AXIOM-Vector available in 2, 4, or 6 profiles 7-16

17 Sight Distance Calculation light coves built using AXIOM Perimeter Trim FACTORS PROFILED AXIOM FACTORS (acoustical) 2 Standard Axiom Standard Axiom Standard Axiom... * Knife Edge Knife Edge for Vector Axiom for Vector Axiom for Vector and 8 Axiom for Vector... * * = Sufficient to hide most light fixtures completely Concave Convex Crown Cove PROFILED AXIOM FACTORS (w/ drywall) Concave Convex Crown Cove Sight Line Sight Elevation Calculations Actual Example 1. Enter the finished ceiling height at light cove, (in feet) Add 0.5 ft. (approx. distance from #1 to top of bulbs) Subtract 6.0 ft. (98th percentile U.S. male eye level) This is your SIGHT ELEVATION Total Enter the COVE DEPTH (in feet) (see drawing) Enter the PROFILE FACTOR (see factor table) 2.7 [ (SIGHT ELEV. (ft.)) x (COVE DEPTH (ft.)) x (PROFILE FACTOR) ] [ (3.7) x (1.0) x (2.7) ] = 10.0 ft. 7. This is your SIGHT DISTANCE (+- 5%) (beyond this distance the top of the bulbs may be visible) ft. Eye Level Sight Distance Cove Depth Floor Level 7-17