APPENDIX A-2 TECHNICAL REFERENCES
|
|
|
- Vivian Jody Turner
- 6 years ago
- Views:
Transcription
1 APPENDIX A-2 TECHNICAL REFERENCES Appendix A-2
2 APPENDIX A-2 TECHNICAL REFERENCES 1.0 GENERAL Refer to Section TECHNICAL REFERENCES for application of codes and technical criteria included below. This list is not exhaustive and is not necessarily complete. The publications to be taken into consideration shall include those editions referenced in Chapter 35 of the 2009 International Building Code (2009 IBC) or the most recent editions. Additional references are listed in the Appendix A-1 SPECIFICATIONS. 2.0 LIST OF CODES AND TECHNICAL CRITERIA 2.1 STANDARDS A/E/C CAD Standards, V4.0 (or newer) available online at: GENERAL CONSTRUCTION ACI 318 ACI 530/ASCE 5/TMS 402 AISC 341 AISC 360 Building Code Requirements for Structural Concrete, American Concrete Institute Building Code Requirements for Masonry Structures Seismic Provisions for Structural Steel Buildings including Suppliment No. 1, American Institute of Steel Construction Specification for Structural Steel Buildings, American Institute of Steel Construction ANSI-ASC A American National Standard for Ladders Fixed Safety Requirements ASCE 7 ASTM ASTM-D-1586 ASTM-D-5299 AWS D1.1 BS7671 Minimum Design Loads for Buildings and Other Structures American Society for Testing and Materials Standard Test Method for Standard Penetration Test Standard Guide for Decommissioning Ground Water Wells Structural Welding Code Steel, American Welding Society Requirements for Electrical Installations, Institution of Electrical Engineers (IEE), Wiring Regulations, Seventeenth Edition Appendix A-2 - Page 1
3 CMAA 70 CMAA 74 EIA ANSI/TIA/EIA-607 Factory Mutual (FM) Specification for Top Running Bridge and Gantry Type Multiple Girder Electric Overhead Traveling Cranes (Crane Manufacturer s Association of America) Specification for Top Running Bridge and Under Running Single Girder Electric Overhead Traveling Cranes Utilizing Under Running Trolley Hoist (Crane Manufacturer s Association of America) (1994) Commercial Building Grounding/Bonding Requirement Standard Approval Guide-Fire Protection, latest edition IBC IEEE C2 IFGC IMC IPC Lighting Handbook International Building Codes, 2009 edition (including the Referenced Standards in Chapter 35 or the latest editions of those Standards) National Electrical Safety Code (NESC), latest edition International Fuel Gas Code, latest edition International Mechanical Code, latest edition International Plumbing Code, latest edition IESNA, latest edition International Mine Action Standards latest edition see for copy of standards TM TM TM Economic Studies Noise and Vibration Electrical Power Supply and Distribution 2.3 FIRE PROTECTION AND LIFE SAFETY NFPA 1 NFPA 10 NFPA 70 NFPA 72 NFPA 75 NFPA 80 NFPA 101 NFPA 110 General Fire Protection, latest edition Portable Fire Extinguishers, latest edition National Electrical Code, latest edition National Fire Alarm Code, latest edition Standard for the Protection of Information Technology Equipment Fire Rated Doors and Windows, latest edition Life Safety Code, latest edition Standard for Emergency and Standby Power Systems, latest edition Underwriters' Laboratories (UL) Fire Protection Equipment Directory (2010) Appendix A-2 - Page 2
4 2.4 UL STANDARDS (AS APPLICABLE)UNIFIED FACILITIES CRITERIA Unified Facility Criteria (UFC) is available online at: UFC UFC A UFC N Design: General Building Requirements Design Build Technical Requirements Design Procedures UFC a Subsurface Drainage, 16 Jan 2004 UFC N Operation and Maintenance: Wastewater Treatment System Augmenting Handbook, 16 Jan 2004 UFC a Wastewater Collection, 16 Jan 2004 UFC fa Domestic Wastewater Treatment 16 Jan 2004 UFC fa Gravity Sewers 16 Jan 2004 UFC A Wastewater Collection 16 Jan 2004 UFC UFC A UFC FA UFC UFC Structural Load Data Structural Design Criteria for Buildings Heating, Ventilating and Air Conditioning Plumbing Systems Design Petroleum Fuel Facilities UFC Electrical Engineering, 3 Feb 2010 UFC Interior Electrical Systems, 3 Feb 2010 UFC AN Design: Interior and Exterior Lighting and Controls, 22 Aug 2006 UFC N Design: Diesel Electric Generating Plants, 16 Jan 2004 UFC Design: Electrical Power Supply and Distribution Systems, 3 Feb USACE-AED DESIGN REQUIREMENTS In addition, technical criteria provided in USACE-AED Design Requirements (most recent version) shall be required for use in design and construction specifications as indicated in the following documents. The following design criteria shall be used: AED Design Requirements Electrical Design Requirements, latest version Site Layout Guidance, latest version Water Tanks and System Distribution, latest version Booster Pumps, latest version Chlorinators, latest version Jockey Pumps, latest version Hydrology, latest version Appendix A-2 - Page 3
5 Culvert and Causeways, latest version Sanitary Sewer and Septic System, latest version Vertical Curve Design, latest version CERP Road Geometric Requirements and Flexible Pavement Section Design Geotechnical Investigations, latest version CADD Design Guide Mechanical & Plumbing Guide, latest version Well Pumps & Well Design, latest version 2.6 COMMUNICATION SYSTEMS APPLICABLE SPECIFICATIONS The Publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by designation only. UFC Design: General Building Requirements United States Department of Agriculture Rural Utilities Service RUS Bulletin 1751F-643 RUS Bulletin 1751F-644 RUS Bulletin 1753F-151 RUS Bulletin 1753F-201 Underground Plant Design, (latest edition) Underground Plant Construction, (latest edition) Construction of Underground Plant, Parts II & III (latest edition) Acceptance Test and Measurements Of Telecommunications Plant, (latest edition) RUS Bulletin 1753E-001 RUS General Specification for Digital, Stored Program, Controlled, Central Office Equipment; RUS Form 522 (latest edition) RUS Publication IP List of Materials Acceptable For Use on Telecommunications Systems of RUS Borrowers, (latest edition) RUS Bulletin Shield Bonding Connectors (PE-33), (latest edition) RUS Bulletin REA Specification for Gas Tube Surge Arrestors (PE- 80), (latest edition) RUS Bulletin 1753E-001 RUS General Specification for Digital Stored Program Controlled Central, (latest edition) Office Equipment Form 522 American National Standards Institute/Telecommunications Industry Association/Electronics Industry Association ANSI TIA/EIA 606-A Administration Standard for The Telecommunications Infrastructure Appendix A-2 - Page 4
6 ANSI TIA/EIA 607-A Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications, (latest edition) ANSI TIA/EIA 607-A ANSI TIA/EIA 568 ANSI TIA/EIA 569-B ANSI TIA/EIA 758-A Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications, (latest edition) Commercial Building Telecommunications Cabling Standard, (latest edition) Commercial Building Standard for Telecommunications Pathways and Spaces, (latest edition) Customer-owned Outside Plant Telecommunications Infrastructure Standard, (latest edition) 2.7 OTHER STANDARDS Standards other than those mentioned above may be accepted if the standards chosen are internationally recognized and meet the minimum requirements of the specified standards. The Contractor shall be prepared to submit proof of this if requested by the Contracting Officer. -END OF SECTION- Appendix A-2 - Page 5
CIVIL BREADTH Exam Specifications
NCEES Principles and Practice of Engineering Examination CIVIL BREADTH and STRUCTURAL DEPTH Exam Specifications Effective Beginning with the April 2015 Examinations The civil exam is a breadth and depth
North Mountain IMS Medical Office Building
North Mountain IMS Medical Office Building Phoenix, Arizona Michael Hopple Technical Assignment 2 October 29 th, 2007 AE 481W-Senior Thesis The Pennsylvania State University Faculty Adviser: Dr. Ali Memari,
ANSI/ ASME HST Performance Standard For Overhead Electric Wire Rope Hoists
SECTION 412213- BRIDGE CRANES Part 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Structural System. Design Criteria Fire Resistance Concrete designed for 2 HR rating (worst case) Geotechnical Report Allowable Bearing Capacity
System Codes and Criteria Design Codes and Standards The design code used is the Wisconsin Administrative Code along with the State of Wisconsin Department of Commerce-Safety & Buildings Chapters Comm
PF-Series Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 PF-Series Gantry Crane This guide can be used to prepare a bid specification for the incorporation of a PF-Series Gantry Crane into a competitive bid project or application.
SECTION PRE-ENGINEERED MEMBRANE STRUCTURE
SECTION 13125 PART 1 - GENERAL 1.1 SUMMARY A. Section includes the design, engineering, fabrication and erection of a frame-supported, tensilemembrane structure complete with entrance and exit doors and
SECTION 16496A MTS MANUAL TRANSFER SWITCH (MANUAL CONTROL ONLY) Note to Spec Writer: { } Denotes EATON Feature reference number
MTS MANUAL TRANSFER SWITCH (MANUAL CONTROL ONLY) Note to Spec Writer: { } Denotes EATON Feature reference number PART 1 GENERAL 01 02 03 04 SCOPE Furnish and install Manual Transfer Switches (MTS) and
Project Address: Name of Person Completing Form:
Statement of Inspections This form is provided as a way to list aspects of the project that require special inspection and testing in accordance with IBC Sections 107.1, 1704, and 1705 and define duties
BUREAU Joe Iuviene, AIA January 20, 2017
architectural BUREAU Joe Iuviene, AIA January 20, 2017 Alterations & Additions NEW TOWN HALL for TOWN OF AUSTERLITZ 816 State Route 203, Spencertown, New York 12165 ADDENDUM NO. 1 This addendum amends
SECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
11. Construction processes and materials Power House Maintenance Building Fuel Treatment Building...
Contents 11. Construction processes and materials... 11-2 11.1 Power House... 11-2 11.2 Maintenance Building... 11-2 11.3 Fuel Treatment Building... 11-3 11.4 Roads & Paths... 11-3 11.5 Fencing... 11-3
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-06 17 19 (November 2016) ----------------------------- Preparing Activity: USACE New Section UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in agreement with
CVEN 483. Structural System Overview
CVEN 483 Structural System Overview Dr. J. Bracci Fall 2001 Semester Presentation Overview 1. Building system primary function 2. Types of load 3. Building materials 4. Structural members 5. Structural
STATEMENT OF SPECIAL INSPECTION FORM
STATEMENT OF SPECIAL INSPECTION FORM Project Title: Plan Check #: Project Address: This Statement of Special Inspections is submitted in fulfillment of the requirements of the 2013 California Building
11/07/2017. Tolerances & The Intolerant World of Structural BIM Coordination. Dave Merrifield. BIM and Tolerances. Speaker Twitter Handle.
Tolerances & The Intolerant World of Structural BIM Coordination Dave Merrifield BIM and Tolerances Speaker Twitter Handle 1 BXP Level of Development Defines trade specific LOD requirements CONCRETE CAST-IN-PLACE
Special Inspections Instructions
Special Inspections Instructions Based on Chapter 17 of the 2012 International Building Code PURPOSE The purpose of this document is to familiarize the Owner, Engineer, Architect, Special Inspector, Testing
This guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
GORBEL PRODUCT SPECIFICATIONS 2010 Gorbel, Inc., P.O., Box 593, Fisher, New York 14453-0593 PHONE: 800-821-0086, FAX: 585-924-6273; WEBSITE: www.gorbel.com November SECTION 41 22 31PRIVATE FREE STANDING
DESIGN CRITERIA. Allowable Stress Design (ASD) AISC-1999.
DESIGN CRITERIA 1. INTRODUCTION This appendix summarizes the codes, standards, criteria, and practices that are generally used in the design and construction structural engineering system for the Sarker
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-13 48 00.00 10 (October 2007) ---------------------------------- Preparing Activity: USACE Superseding UFGS-13 48 00.00 10 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
SECTION FOUNDATION DRAINAGE
SECTION 33 41 13 SPEC WRITER NOTES: Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section
UFGS (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-33 82 00 (April 2006) -------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-16711 (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
E-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
Minimum Guidelines for the Design and Use of Underpins When Performing Foundation Stabilization and/or Supplementation UP-08
Minimum Guidelines for the Design and Use of Underpins When Performing Foundation Stabilization and/or Supplementation UP-08 Table of Contents 1. Title 2. Designation 3. List of Figures 4. Scope 5. Referenced
This guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
Table of Contents. Division 2 Site Work Site Preparation Site Demolition Tree Protection Excavation, Trenching, and Backfilling for Utilities
Division 1 Requirements Design and Construction Quality Campus Master Plans Texas Tech University System Operating and Building Maintenance Project Administration Historically Underutilized Business (HUB)
PLAN SUBMITTAL REQUIREMENTS - ARCHITECTURAL
FIRE DEPARTMENT 10573 E Stockton Blvd. Elk Grove, CA 95624 (916) 405-7100 Fax (916) 685-6622 www.yourcsd.com PLAN SUBMITTAL REQUIREMENTS - ARCHITECTURAL I Purpose To advise architects, engineers and contractors
A-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
CITY OF CAMDENTON OFFICE OF THE BUILDING OFFICIAL Commercial Building & Architectural Review Permit Application
CITY OF CAMDENTON OFFICE OF THE BUILDING OFFICIAL Commercial Building & Architectural Review Permit Application DATE: / / PERMIT # REQUEST FOR: NEW BUILDING ADDITION REMODEL PLUMBING ONLY ELECTRIC ONLY
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Table of Contents.2. Introduction...3 Gravity Loading and Deflections..4. Existing Structural System..8
WISCONSIN PLACE RESIDENTIAL TECHNICAL ASSIGNMENT 2 OCTOBER 29, 2007 KURT KRASAVAGE THE PENNSYLVANIA STATE UNIVERSITY STRUCTURAL OPTION FACULTY ADVISOR: DR. ALI MEMARI 1 Table of Contents Table of Contents.2
CHAPTER 7. ERRATA. 1) Chapter 1 Introduction and Summary:
7 Errata CHAPTER 7. ERRATA This chapter addresses errors and corrections to the text of the Phase 1 Draft EIS and is organized by Draft EIS chapter, section, and page number. 1) Chapter 1 Introduction
PLANS REVIEW CRITERIA - COMMERCIAL BUILDINGS
PLANS REVIEW CRITERIA - COMMERCIAL BUILDINGS NOTE: Building Code compliance is the obligation of design professionals and/or contractors. Plan review and inspection guidelines are to be used to ensure
City and County of San Francisco CONTRACT No A SFO - Data Center, Building 60 SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 27 05 36 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SCOPE OF WORK A. Cable Trays for Communications Cabling 1. Cable Trays 2. Cable Runways 3. Basket Tray B. Cable Tray Support
Solar Standards Development
Solar Standards Development An Overview of Product Standards July 22, 2016 About SEIA U.S. National Trade Association for Solar Energy Founded in 1974 1,000 member companies from all 50 states Our Mission:
PATHWAYS FOR COMMUNICATIONS SYSTEMS
270528 PATHWAYS FOR PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment for the complete installation of work called for in the Contract Documents. 1.2 SCOPE OF WORK A. This
CONSTRUCTION MANAGEMENT
CONSTRUCTION MANAGEMENT AND MANAGER that offers comprehensive management throughout the project, from concept to completion, yielding the greatest possible benefit to the owner. IPS will offer uncolored
C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Specification Lightning Protection Systems
Specification Lightning Protection Systems General: Summary A) This Section specifies the lightning protection system for the building(s) or structure(s). This system provides safety for the building and
FOUR FOLD DOORS-WITH SINGLE OVERHEAD MTD OPERATOR
FOUR FOLD DOORS-WITH SINGLE OVERHEAD MTD OPERATOR Section 083713- Four Fold Doors- With Single Overhead Mounted Operator Part 1-General 1.1 Related Document: A. Drawing and general provisions of contract,
Protecting Penetrations in Fire Rated Construction
Protecting Penetrations in Fire Rated Construction NY State Fire Marshals and Inspectors Conference September 7 th Bruce E. Johnson UL Codes and Advisory Services UL and the UL logo are Trademarks of UL
T-Series Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 T-Series Gantry Crane This guide can be used to prepare a bid specification for the incorporation of a T-Series Gantry Crane into a competitive bid project or application.
SEWER SYSTEM DESIGN GUIDELINES
SEWER SYSTEM DESIGN GUIDELINES PART 1 GENERAL 1.1 GENERAL GUIDELINES A. The following sewer system design guidelines are based on Federal, State and Local health requirements, and the Berkeley County Water
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-27 05 29.00 10 (August 2011) --------------------------------- Preparing Activity: USACE New UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in agreement with
North Mountain IMS Medical Office Building
North Mountain IMS Medical Office Building Phoenix, Arizona Michael Hopple Technical Assignment 1 October 5 th, 2007 AE 481W-Senior Thesis The Pennsylvania State University Faculty Adviser: Dr. Ali Memari,
B. Subsurface data is available from the Owner. Contractor is urged to carefully analyze the site conditions.
SECTION 31 23 33 - TRENCHING, BACKFILLING AND COMPACTION PART 1 - GENERAL 1.1 SCOPE A. This Section specifies the requirements for excavating and backfilling for storm sewer, sanitary sewer, water distribution
Basic Information for Obtaining Permits, Submitting Plans, Scheduling Inspections, etc.
Basic Information for Obtaining Permits, Submitting Plans, Scheduling Inspections, etc. Franklin County Septic & Zoning permit application: A septic and zoning permit is required for residential or commercial
HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61)
PART 1-GENERAL INTEGRALLY MOLDED FLANGED OUTLET (IMFO ) - COMPLETE DRAIN HIGH DENSITY CROSSLINKED POLYETHYLENE STORAGE TANKS WITH OXIDATION RESISTANT LINING SYSTEM (NSF/ANSI 61) 1.01 Requirements 1. The
MASTER AGREEMENT FOR BRIDGE DESIGN SERVICES SCOPE OF WORK
MASTER AGREEMENT FOR BRIDGE DESIGN SERVICES SCOPE OF WORK The professional services to be provided by the Consultant under this Agreement shall be as necessary to complete the required analyses, layouts,
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-34 73 13 (April 2008) Change 1-11/14 -------------------------- Preparing Activity: USACE Superseding UFGS-34 73 13 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
SECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
BUILDING CODES & DESIGN CRITERIA
BUILDING CODES & DESIGN CRITERIA Adopted Building Codes: 2006 International Building Code (IBC) 2006 International Residential Code (IRC) 2006 International Mechanical Code (IMC) 2006 International Plumbing
August 2015 INTERIM No. 180 (I)
SPECIFICATIONS FOR FIELD LABORATORIES 180. 1. SCOPE These Specifications govern all requirements for supplying and maintaining a field laboratory for the exclusive use of the Engineer. 2. SUPPLY The Contractor
Contact Clark Public Utilities Construction Services department at (360) to initiate a request for service.
CHAPTER3 Clark Public Utilities Commercial Electric Service Handbook Commercial Underground Services Preparing for the installation The following checklist will assist in preparing a project for the installation
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below
ICC Product Update January 29, 2010
2009 Home Builders Jobsite Codes A Quick Guide to the 2009 International Residential Code Available #7103S09 List $28.95 ICC Member $26.00 ISBN: 9780867186567 Get instant answers to the most asked questions
2. Is there anything I can do to prevent my water service lateral from freezing?
FROZEN WATER SERVICE LATERALS FAQ s 1. Why do water service laterals freeze, aren t our pipes buried deep enough? There are 3 main factors which contribute to freezing of a water service lateral Frost
behind every great accomplishment...
behind every great accomplishment... is an even greater team ydrotech Engineering, Inc. Who We Are JEA HydroTech Engineering, Inc. is a diverse and experienced group of Licensed Professional Engineers
SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System
SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF WELDED SYSTEM PART 1 GENERAL 1.1 SECTION
Reclaimed Water Treatment, Distribution, Pumping and Storage Engineering Report Form
Oklahoma Department of Environmental Quality Water Quality Division Phone: 405-702-8100 Construction Permitting Section 707 N. Robinson, OKC, OK 73102-6010 P.O. Box 1677, OKC, OK 73101-1677 Reclaimed Water
Structural Redesign Gravity System
Redesign Gravity System Design Considerations A composite floor system was used for this design to maximize the efficiency of the material being used. This type of system requires less material and provides
TECHNICAL REPORT 2 BUILDING CODES, SPECIFICATIONS, AND LOADS
TECHNICAL REPORT 2 BUILDING CODES, SPECIFICATIONS, AND LOADS SECOND & STATE BUILDING HARRISBURG PA JADOT A MOOSMAN STRUCTURAL OPTION Primary AE Faculty Consultant... Dr. Thomas E. Boothby Date of Submission...
SECTION VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS
SECTION 08211 VINYL ACRYLIC CLAD WOOD DOORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division I Specification
The University of Texas at Austin September 30, 2011
SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 SUMMARY A. This section governs the products and execution requirements relating to furnishing and installing grounding and
A/E Design Deliverable Checklist
A/E Design Deliverable Checklist Design deliverables for the Design Development phase shall include all items listed in the Design Development column as well as those all items listed in the Schematic
EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM
ICC-ES Report PMG-1452 Issued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 00 FACILITY WATER
B. Provide liquid-filled secondary substation transformers as indicated on drawings.
SECTION 26 12 13 PART 1 - GENERAL 1.01 WORK INCLUDED A. Comply with the provisions of Sections 26 05 00. B. Provide liquid-filled secondary substation transformers as indicated on drawings. 1.02 RELATED
SECTION STAINLESS STEEL FLEXIBLE CABLE MESH. Show hidden Specifier Notes for best results
SECTION 05700 STAINLESS STEEL FLEXIBLE CABLE MESH Show hidden Specifier Notes for best results PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Stainless Steel Flexible Cable Mesh B. Related Sections:
UFGS (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-13 21 48 (April 2006) -------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-13034 (August 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
ELECTRICAL BULLETIN
PO Box 697 Halifax, Nova Scotia B3J 2T8 ELECTRICAL BULLETIN 2015-01 From: David MacLeod, C.E.I., P.Eng. Pg. 1 of 7 Provincial Chief Electrical Inspector Date: March 10, 2015 Subject: Adoption of the 2015
Jean Vaillancourt Fire Protection Specialist Hilti (Canada) Corp.
Cable Management Firestop Jean Vaillancourt Fire Protection Specialist Hilti (Canada) Corp. FIRESTOPPING KNOWLEDGE FOR BETTER SPECIFICATION AND DESIGN OF FIRE-RATED CONSTRUCTION Presentation Topics and
SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
Details for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses
Details for Exterior Brick Masonry Veneer Supported by Metal Plate Connected Wood Trusses Released May 20, 2009 Updated March 9, 2011 Introduction: Wood frame structures with attached brick masonry veneer
LARGE STORAGE TANK PROJECT
INTRODUCTION The Fairbanks Large Storage Tank is part of the Interior Energy Project (IEP) designed to expand natural gas distribution in Fairbanks and Interior Alaska. A tank with a capacity of 0.44 Bcf
Report on First Revisions with Statement June 2014 NFPA 5000
5000 FR902 BLD-SCM (Entire Document) Recommendation: Replace AF&PA with AWC throughout all of NFPA 5000 as follows: AF&PA AWC Statement: Responsibility for reference documents previously associated with
NATIONAL DIPLOMA: ENGINEERING: CIVIL Qualification code: NDCI03 - NQF Level 6
NATIONAL DIPLOMA: ENGINEERING: CIVIL Qualification code: NDCI03 - NQF Level 6 Campus where offered: Pretoria Campus (day classes) Last year of new intake: 2017 Teach-out (phase-out) date: 31 December 2022
SECTION SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM
SECTION 13 1100 SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as
TYPICAL INSTALLATION INSTRUCTIONS
TYPICAL INSTALLATION INSTRUCTIONS Environment One Grinder Pump Feature Identification 1. Grinder Pump Basin High density polyethylene (HDPE) 2. Accessway Cover Painted Steel 3. Electrical Quick Disconnect
We provide exceptional Quality project Management, multi disciplinary Engineering design and Construction consultancy. QMEC Company Profile 1
We provide exceptional Quality project Management, multi disciplinary Engineering design and Construction consultancy 1 INTRODUCTION & BACKGROUND COOPORATE INFORMATION SCOPE OF SERVICES 5 ORGANIZATION
Mount Vernon Elementary School Grades PK 5
Barbour County Schools Comprehensive Educational Facilities Plan 2010-2020 Mount Vernon Elementary School Grades PK 5 Blackwood Associates, Inc. / MSES consultants, Inc. / Roy Blizzard and Associates Mount
GUIDELINES FOR SANITARY DESIGN AND CONSTRUCTION OF MILK PRODUCTS PLANTS (rev )
Milk and Dairy Food Safety Branch 1220 N Street, Sacramento, CA 95814 GUIDELINES FOR SANITARY DESIGN AND CONSTRUCTION OF MILK PRODUCTS PLANTS (rev. 10-20-2011) The outline below lists sanitary requirements
Structural Engineering
Structural Engineering 4 4.0 TABLE OF CONTENTS 4.1 General Approach 115 Submission Requirements 4.2 Codes and Standards 116 Structural Design of New Buildings 116 Use of Recycled Materials 4.3 Structural
ELECTRICAL CODE TRADE REFERENCE
ELECTRICAL CODE TRADE REFERENCE FIFTH EDITION By Marvin Rosenberg UNIT 2: CODE COMPONENTS General Rule Sections 0 Definitions accurate interpretation 2 General Rules administrative and technical requirements
LIFE SCIENCES BUILDING STRUCTURAL CONCEPTS AND EXISTING CONDITIONS
Structural Technical Report 1 LIFE SCIENCES BUILDING STRUCTURAL CONCEPTS AND EXISTING CONDITIONS Prepared for: Dr. Aly M. Said Dr. Thomas Boothby Professor Kevin Parfitt Dr. Charles D. Cox Prepared by:
Wall Mounted Jib Crane
SPANCO PRODUCT SPECIFICATIONS 1 Wall Mounted Jib Crane This guide can be used to prepare a bid specification for the incorporation of a Wall Mounted Jib Crane into a competitive bid project or application.
Washoe County PLAN SUBMITTAL
Washoe County PLAN SUBMITTAL Washoe County PLAN SUBMITTAL SPECIAL INSPECTION AND TESTING AGREEMENTS SEPTEMBER 2013 Washoe County Permits Plus Zone 1001 East Ninth Street PO Bo 11130 Reno, NV 89520-0027
Structural Eurocodes an overview
Structural Eurocodes an overview BS EN 1990, Eurocode Basis of Structural Design Structural safety, serviceability and durability BS EN 1991, Eurocode 1 Actions on Structures Actions on structures BS EN
One and Two Family Additions
One and Two Family Additions An addition to a house, duplex, garage, or an accessory structure requires a building permit prior to performing any construction. Building Department & Permit Office Mon-Fri
State of Connecticut Plumbing Apprenticeship Information Packet 17-18
State of Connecticut Plumbing Apprenticeship Information Packet 17-18 Connecticut Technical High School System Connecticut State Department of Education PLUMBING APPRENTICESHIP INFORMATION PACKET 1 2017-18
EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING
ICC-ES Report PMG-1244 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER
DIVISION 14 CONVEYING SYSTEMS
DIVISION 14 CONVEYING SYSTEMS A. GENERAL TO ALL ELEVATORS AND EQUIPMENT 1. ALL elevator equipment, without exception, installed on this campus shall be non- proprietary. a) Any elevator company shall be
02800 SHADE STRUCTURES
02800 SHADE STRUCTURES for PLAY AREAS ****************************************** SPECIFIER: The shade structure shall utilize a four point hypar system with four columns located a minimum of 10 feet from
REINFORCING TABLES INSTALLATION MANUAL
REINFORCING TABLES 201 REINFORCING TABLES Design Limitations Introduction The structural wall reinforcing and lintel design tables contained within the Appendix of NUDURA s Installation Manual have been
DYNAMIC PROTOTYPE BIM MANUAL FOR A FITNESS CENTER V1.0 November 21, 2011
DYNAMIC PROTOTYPE BIM MANUAL FOR A FITNESS CENTER V1.0 November 21, 2011 Developed by: Air Force Center for Engineering and the Environment Ralph Rick Sinkfield, YD-03, DAF Project Manager Email: ralph.sinkfield@us.af.mil
BUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
Testing Methods of Driven Piles on INDOT Demonstration Projects
66 Testing Methods of Driven Piles on INDOT Demonstration Projects by Firooz Zandi, P.E. Chief Geotechnical Engineer Division of Materials & Tests, I NDOT INTRODUCTION: This paper provides an overview
2014 Commercial Plan Submittal Checklist
City of Aurora Public Works Department AURORA PUBLIC SCHOOLS AND CHERRY CREEK PUBLIC SCHOOLS 2014 Commercial Plan Submittal Checklist Permit Center 15151 E. Alameda Parkway, Ste 2400 Aurora, CO 80012 303-739-7420
2. A preconstruction meeting with the TWA s staff is required prior to initiating construction.
General: 1. Construct utilities in accordance to TWA approved plans and shop drawings. Any deviation from the approved plans shall be approved by the DEVELOPER S ENGINEER and TWA 2. A preconstruction meeting
Thule Prototype BIM Manual for Dormitories. February 5, 2010
Thule Prototype BIM Manual for Dormitories February 5, 2010 TABLE OF CONTENTS INTRODUCTION Executive Summary 2 Goals 2 Scope and Use 2-4 Program Assumptions Kit of Parts GUIDELINE INTEGRATION Site Design
The Building Codes A.R.E. Building Design and Construction Exam Prep
Know Thy Codes! The Building Codes Building Codes The Code of Hammurabi 4000bc Developed 19 th and 20 th c. Codes define what you can and can t do Allowable area and height based on degree of danger Fire