Access Doors. Babcock-Davis Always right there.
|
|
- Maryann Melanie O’Brien’
- 6 years ago
- Views:
Transcription
1 Distributed by: BEST MATERIALS Ph: , Fa: Babcock-Davis
2 Babcock-Davis 2 Babcock-Davis & Panels are manufactured to solve a myriad of access needs. Custom sizing, materials, and custom colors are available to ensure that whatever you need for your project, we ve got you covered. Delivering the doors you need: Babcock-Davis BN: Non-Rated Flush BR: Non-Rated Recessed BI: Fire-Rated Insulated BU: Fire-Rated Non-Insulated BS: Fire-Rated Insulated Security BM: Non-Rated Flush Security BHS: BTS: BRU: Non-Rated Non-Rated Fire-Rated High-Security Top-Security Recessed Tiled BXT: Non-Rated Eterior BFRU: Fire-Rated Upward BFRD: BLW: Fire-Rated Non-Rated Oversized Lightweight fa BabcockDavis.com BDTK: Non-Rated Draft Stop BPL: Non-Rated Plastic
3 Feature Specifications Flange Door Standard Paintable Powder Coat Finish to be used as a finish coat or a prime coat Frame Key/Lock Latch/Bolt Frame Plaster stop for plaster applications Drywall L-bead, ready to accept a joint compound All-Purpose eposed 1 frame flange for most applications Distributed by: BEST MATERIALS Ph: , Fa: Sales@BestMaterials.com 3
4 Flush Non-Rated BNW: Tape In BNP: Plaster BNT: All Purpose Babcock-Davis BN Series non-rated flush access doors have a minimal sight line for a concealed appearance. BNT non-rated access doors are designed with a one inch eposed flange for flush installation in any vertical or horizontal surface. BNW non-rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces, leaving only the door eposed. BNP non-rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces, leaving only the door eposed. Door: 14-gauge cold rolled steel Frame: 16-gauge cold rolled steel BNT: 1 flange for all surfaces BNW: 22-gauge galvanized drywall corner bead BNP: 22-gauge galvanized plaster casing bead Hinge: BNT: Concealed spring pin* BNW: Concealed continuous piano BNP: Concealed continuous piano Latch: Screwdriver cam latch *Flush continuous piano hinges are standard on all stainless steel panels and those eceeding 24 width and/or 36 length dimension. Shown with optional mortise preparation and colored powder coat. BN FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD P PLASTER CASING C SCREWDRIVER CAM L KEY OPERATED CAM 6 X 6 16 X X 36 8 X 8 18 X X X X X X X X X X X X X X X X X X X 30 B BONDERIZED / GALVANIZED M MASONRY ANCHORS S T304 STAINLESS STEEL 4
5 Recessed Non-Rated BRA: No Flange BRP: Plaster BRW: Tape In Babcock-Davis BR Series recessed access doors are designed with a 5/8 depth pan to receive infill material to match surrounding surface. BRW recessed access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces and designed with a 5/8 depth pan to receive a layer of drywall for a concealed appearance. BRP recessed access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces and designed with a 5/8 depth pan to receive plaster for a concealed appearance. BRA recessed access door is designed with a 5/8 depth pan to receive acoustical tile. Door: 16-gauge cold rolled steel Frame: 16-gauge cold rolled steel BRW: 22-gauge galv. drywall corner bead BRP: 22-gauge galv. plaster casing bead BRA: No frame required - not recommended for grid ceilings Hinge: Concealed pivoting rod Latch: Screwdriver cam latch Pan Depth: 5/8 Insulation: None BR FLANGE WIDTH HEIGHT FLANGE A NO FLANGE W DRYWALL BEAD P PLASTER CASING C SCREWDRIVER CAM L KEY OPERATED CAM 8 X 8 18 X X X X X X X 24 B BONDERIZED / GALVANIZED S T304 STAINLESS STEEL _ CABINET HINGE (VERTICAL) 5
6 Fire-Rated Insulated BIW: Tape In BIP: Plaster BIT: All Purpose Babcock-Davis BI Series insulated, fire rated access doors provide access through openings in fire rated vertical or horizontal surfaces. UL listed B label for hours in vertical surfaces (maimum temperature rise to 250ºF in 30 min.). Warnock-Hersey listed for 3 hours in horizontal surfaces. BIT fire-rated access doors are designed with a one inch eposed flange for flush installation in any vertical or horizontal surface. BIW fire-rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical or horizontal drywall surfaces. BIP fire-rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical or horizontal plaster surfaces. Door: 20-gauge cold rolled steel Frame: 16-gauge cold rolled steel BIT: 1 flange for all surfaces BIW: 22-gauge galv. drywall corner bead BIP: 22-gauge galv. plaster casing bead Hinge: BIT: Flush continuous piano BIW: Concealed pin BIP: Concealed pin Latch: Knurled knob/key operated latch bolt Insulation: 2 thick fire rated mineral fiber Shown with knurled knob/key operated latch bolt Interior latch release mechanism is standard. BI FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD P PLASTER CASING K KNURLED KNOB/KEY OPERATED BOLT 8 X 8 10 X X X X X X X X X X X X X X X 36 *24 X 48 *30 X 30 *32 X 32 *36 X 36 *36 X 48 *48 X 48 B BONDERIZED / GALVANIZED M MASONRY ANCHORS S T304 STAINLESS STEEL *Custom Sizes Available Upon Request 6 Distributed by: BEST MATERIALS Ph: , Fa: Sales@BestMaterials.com
7 Fire-Rated Non-Insulated BUW: Tape In BUP: Plaster BUT: All Purpose Babcock-Davis BU Series uninsulated, fire rated access doors provide access through openings in fire rated vertical surfaces and have a minimal sight line for a concealed appearance. BUL listed B label for hours in vertical surfaces. BUT fire rated access doors provide access through fire rated vertical surfaces, in any material including drywall, plaster, and CMU. BUW fire rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical drywall surfaces,. BUP fire rated access doors are manufactured with plaster casing bead frames for a concealed appearance in vertical plaster surfaces. Door: 14-gauge cold rolled steel Frame: 16-gauge cold rolled steel BUT: 1 flange for all surfaces BUW: 22-gauge galv. drywall corner bead BUP: 22-gauge galv. plaster casing bead Hinge: BUT: Flush continuous piano BUW: Concealed pin BUP: Concealed pin Latch: Knurled knob/key operated latch bolt Insulation: None Shown with knurled knob/key operated latch bolt BU FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD P PLASTER CASING K KNURLED KNOB/KEY OPERATED BOLT 8 X 8 10 X X X X X X X X X X X X X X X X X X X X 48 B BONDERIZED / GALVANIZED M MASONRY ANCHORS S T304 STAINLESS STEEL 7
8 Security Fire-Rated Insulated BSW: Tape In BSP: Plaster BST: All Purpose Babcock-Davis BS Series insulated, fire rated, security access doors are manufactured with heavy-duty materials to prevent unwanted access through openings in fire rated vertical surfaces. UL listed B label for hours in vertical surfaces (maimum temperature rise to 250ºF in 30 min.). BST security fire rated access doors are manufactured with a one inch flange for installation in any vertical surface. BSW security fire rated access doors are manufactured with a tape in bead flange for a concealed appearance in vertical drywall. BSP security fire rated access doors are manufactured with a plaster casing bead flange for a concealed appearance on vertical plaster. Door: 14-gauge cold rolled steel Frame: 16-gauge cold rolled steel BST: 1 flange for all surfaces BSW: 22-gauge galv. drywall corner bead BSP: 22-gauge galv. plaster casing bead Hinge: BST: Flush continuous piano BSW: Concealed pin BSP: Concealed pin Latch: Mortise preparation for 1-1/8 mortise cylinder Insulation: 2 thick fire rated mineral fiber Shown with knurled knob/key operated latch bolt BS FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD P PLASTER CASING K KNURLED KNOB / KEY OPERATED BOLT 12 X X X X X X X X 48 B BONDERIZED / GALVANIZED STEEL M MASONRY ANCHORS S T304 STAINLESS STEEL 8
9 Security Non-Rated Flush BMW: Tape In BMP: Plaster BMT: All Purpose Babcock-Davis BM Series non-rated, flush, security access doors provide access through vertical or horizontal surfaces and have a minimal sight line for a concealed appearance. BMT Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a one inch flange for installation in any vertical or horizontal surface. BMW Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a drywall bead frame for a concealed appearance on vertical or horizontal drywall surfaces. BMP Series medium security access panels are manufactured with heavy-duty materials to prevent unwanted access, and a plaster casing bead frame for a concealed appearance in vertical or horizontal plaster surfaces. Door: 12-gauge cold rolled steel Frame: 12-gauge cold rolled steel BMT: 1 flange for all surfaces BMW: 22-gauge galv. drywall corner bead BMP: 22-gauge galv. plaster casing bead Hinge: Concealed continuous piano Latch: Pinned allen head cam latch(es) Shown with mortise cylinder BM FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD P PLASTER CASING P PINNED ALLEN HEAD CAM ES S PINNED ALLEN HEAD SECURITY SCREWS 8 X 8 10 X X X X X X X X X X X X X X X X X X X X X 48 B BONDERIZED / GALVANIZED STEEL M MASONRY ANCHORS S T304 STAINLESS STEEL 9
10 High Security Non-Rated Babcock-Davis BHS flush, security access doors control access through vertical or horizontal surfaces and are manufactured with detention grade materials. Door: 10-ga. cold rolled steel Frame: 2 2 3/16 steel angle Hinge: Surface-mounted heavy-duty butt hinges Latch: Security screws Rough opening is door size + 3/4. BHS: All Purpose BHS WIDTH HEIGHT D DETENTION LOCK PREP S SECURITY SCREWS 12 X X X X X X X X 48 M MASONRY ANCHORS S T304 STAINLESS STEEL 10 Distributed by: BEST MATERIALS Ph: , Fa: Sales@BestMaterials.com
11 Top Security Non-Rated Access Door Babcock-Davis BTS flush, security access doors control access through vertical or horizontal surfaces and are manufactured with detention grade materials. In addition, our formed door creates a return flange on the perimeter of the door to ensure flatness of material, and tamperproof edges (ecellent for plumbing chases). Door: 7-ga. hot rolled steel Frame: 2 3 3/16 steel angle Hinge: Surface-mounted heavy-duty butt hinges Latch: Detention lock preparation BTS: All Purpose BTS WIDTH HEIGHT D DETENTION LOCK PREP 12 X X X X X X X X 48 M MASONRY ANCHORS S T304 STAINLESS STEEL 11
12 Recessed Fire-Rated Babcock-Davis BRU Series uninsulated access doors provide access through vertical surfaces in ceramic tile applications. When installed, the door and frame are completely concealed, providing an aesthetically pleasing appearance. BRU access doors can be mounted in any material including drywall, plaster, and CMU. Babcock-Davis BRU Series access door is designed to accept a tile up to 5/8 depth, including mastic, for a concealed appearance. UL listed B label for hrs. Door: 14-ga bonderized/galvanized steel Frame: 16-ga bonderized/galvanized steel Hinge: Cabinet type Latch: Flush key operated lock Finish: None Interior latch release mechanism is standard. BRU: Concealed Panel for Tile BRU FLANGE WIDTH HEIGHT FLANGE T 1 FLANGE W DRYWALL BEAD K KNURLED KNOB / KEY OPERATED BOLT 8 X 8 12 X X X X 24 B BONDERIZED / GALVANIZED STEEL S T304 STAINLESS STEEL 12
13 Eterior Non-Rated BXT: Eterior Shown with optional locking handle (Model BXTL2424) Babcock-Davis BX Series eterior access panels provide efficient and quick access in eterior applications, while keeping even the harshest of environments out of the building. Dual acting non-locking handles make it possible to open this door from the inside or outside. An eterior lockable handle is also available. Door: 20-ga galvanized steel Frame: T5 etruded aluminum Hinge: Stainless steel continuous piano Latch: Dual acting, chrome-plated handle(s) Finish: Mill (Paint grip finish on door face panel) Insulation: Foam, 2.25 lb density Gasketing: Etruded santoprene Rough opening equals door size. Shown with optional 1/4 turn latch (Model BXTT1212) BXT WIDTH HEIGHT A NON-LOCKING HANDLE D D-RING L LOCKING HANDLE (EXTERIOR ONLY 1 PER DOOR) T 1/4 TURN P PADLCOK M MORTISE LOCK C THREE-POINT 8 X 8 12 X X X X X X X 36 Distributed by: BEST MATERIALS Ph: , Fa: Sales@BestMaterials.com 13
14 Oversized Fire-Rated Babcock-Davis BFRD Series fire-rated, oversized, double leaf access doors provide access through openings in fire-rated vertical or horizontal surfaces. The BFRD is the industry s only fire rated access panel with sizes available larger than in horizontal surfaces. The double leaf design has a removable mullion. BFRD: Oversized Door: Frame: Hinge: Latch: Finish: Insulation: 18-gauge cold rolled steel 16-gauge cold rolled steel Concealed continuous rod hinge 1/4 Allen head key with automatic panel closer Paintable powder coat 1-1/2 non-combustible, high temperature Rough opening is door size. Interior latch release mechanism is standard. BFRD WIDTH HEIGHT 36 X X X X 48 D DOUBLE DOOR S T304 STAINELESS STEEL T 3-HOUR RATED C CEILING APPLICATION W WALL APPLICATION 14
15 Lightweight Non Rated Babcock-Davis BLW Lightweight, non-rated, insulated access door offers a solution to larger openings in vertical or horizontal applications available in both pre-finished, embossed, galvanized steel, and aluminum. Door: 26-gauge pre-finished embossed galvanized steel (Optional.063 aluminum panel insert) Frame: T5 etruded aluminum Hinge: Aluminum continuous piano hinge Latch: Screwdriver cam latch Finish: White embossed steel Flange: Rolled 1-5/16 wide Insulation: 3/4 polystyrene with 3.8 R-value at 75 F BLW: All Purpose BLW WIDTH HEIGHT T SCREWDRIVER CAM L KEY OPERATED CAM 12 X X X X X X X X X X X X X 36 A ALUMINUM INSERT PANEL 15
16 Upward Opening Fire-Rated Babcock-Davis BFRU access panels are for those special installation circumstances when the door of the access panel must swing upward or inward. The BFRU is available with a Warnock Hersey 2 or 3 hour fire rating. Door: 18-gauge cold rolled steel Frame: 16-gauge cold rolled steel Hinge: Concealed continuous piano Latch: 1/4 Allen head key with optional automatic panel closer Insulation: Non-combustible, high temperature Interior latch release mechanism is standard. BFRU: Upward Opening BIUA WIDTH HEIGHT BFRU WIDTH HEIGHT 12 X X X X X X 36 B BONDERIZED / GALVANIZED STEEL S T304 STAINELESS STEEL 24 X X X X X X 36 B BONDERIZED / GALVANIZED STEEL S T304 STAINELESS STEEL 16
17 Draft Stop Non Rated Babcock-Davis BDTK self closing, self latching access panels provide access through draft stops in attic spaces. They prevent back draft from one section of an attic to another. This standard non-rated access door is self-closing and allows for access from both sides of the door. Door: 14-gauge cold rolled steel Frame: 16-gauge cold rolled steel Hinge: Flush continuous piano Latch: Knurled knob/key operated latch bolt Flange: 1 flange for all surfaces BDTK: Draft Stop Shown with knurled knob/key operated latch bolt BDTK WIDTH HEIGHT 22 X X X X X X X X 48 B BONDERIZED / GALVANIZED STEEL S T304 STAINELESS STEEL 17
18 Plastic Non Rated BPL: Plastic Babcock-Davis BPL plastic access doors provide simple and inepensive access through a vertical or horizontal surface in residential or light-duty applications. The lightweight design with a removable door is easily installed by applying glue or adhesive to the back of the frame. Door: 1/8 high impact styrene plastic removable door Frame: Reversible 3/4 flange frame Latch: Snap latches securing door Finish: Teturized white finish BPL WIDTH HEIGHT 4 X 6 8 X 8 14 X 29 6 X 9 14 X 14 18
19 Options B Galvanized Bonderized Steel With primer coat. Use where a more corrosion resistant material is required. S Stainless Steel Type #304 With #4 satin polish finish. Use in areas that require the highest level of corrosion resistance. Can also be used in areas where a polished stainless steel look is desired. C Screwdriver Operated Cam Latch* Most commonly used. For standard applications. K Knurled Knob/ Key Operated Latch Bolt Patented ball bearing latch bolt operated by a screw-in type knurled knob or flush key. This is the standard latching mechanism on our fire rated models. D Double Leaf Access Panel When you need access to large openings, we recommend double leaf panels for easy use. L Key Operated Cam Lock* When locks are required, it provides an economical solution for controlled access. C Drip Cap on Frame* Directs running water away from the face of the panel. G Gasketing Applied to the doorstops to provide weather resistance and reduces airflow between the panel and frame. Also available with UL listed smoke seal. M Mortise Cylinder Lock Preparation Provides a high level of security and matches the project hardware. The panel accepts a standard mortise cylinder by most lock manufacturers (Best, Corbin, Russwin, Schlage, etc.) H He Head Cam Latch* Requires a standard allen wrench to open the panel. H Continuous Piano Hinge Provides specification compliance when required. L Louvered Door* Provides ventilation for special applications. M Masonry Anchors Attached to the frame to secure the panel when installed in masonry. Z Concealed Continuous Piano Hinge Provides added security while maintaining an appealing appearance. P Pinned He Head Cam Latch* For more secure applications requires a special pinned allen wrench to open the panel. S Security Screw Pinned He Head* Highest security without a lock requires special pinned allen wrench to open the panel. D Detention Lock Preparation For heavy-duty detention deadbolt lock. Used in maimum security applications. N Knurled Knob Cam Latch* Unrestricted access no tool required. Finger operated. *Not available on fire rated doors or BXT, BFRD, BFRU, BPL. Distributed by: BEST MATERIALS Ph: , Fa: Sales@BestMaterials.com 19
Access Doors. Complementary Building Products. Right to site.
Complementary Building Products Nystrom & Panels are manufactured to solve a myriad of access needs. Custom sizing, materials, and custom colors are available to ensure that whatever you need for your
More informationAccess Doors PRODUCT CATALOG
Access Doors 08 3100 PRODUCT CATALOG Great Products. Better Partners. ROOF HATCH + SMOKE VENT 07 7200 FIRE PROTECTION SPECIALTIES 05 5000 FLOOR DOORS 08 3486 STAIR TREADS + NOSINGS 05 5000 ENTRANCE MATS
More informationDirect Service Done Right. Access Doors + Panels Catalog
Direct Service Done Right 08 3100 Access Doors + Panels Catalog Direct Service Done Right div 5 stair treads + nosings 05 5000 fall protection 05 5213 / 07 7200 entrance mats + frames entrance floor grilles
More informationwhere high efficiency is the standard
Access Doors 2016 where high efficiency is the standard Experience Milcor offers years of experience in the manufacture of a broad range of products and services for residential, commercial, institutional
More informationWHERE HIGH EFFICIENCY IS THE STANDARD
ACCESS DOORS 2017 WHERE HIGH EFFICIENCY IS THE STANDARD EXPERIENCE Milcor offers years of experience in the manufacture of a broad range of products and services for residential, commercial, institutional
More informationACCESS PANELS AND DOORS
ACCESS PANELS AND DOORS Division 08 1 00 Access Doors and Frames Division 08 1 1.5 Security Access Doors and Panels Division 08 1 1 Access Panels and Frames FIRE-RATED: ACCESS PANELS SELECTION GUIDE &
More informationB. Provide fire-rated access doors where indicated or scheduled.
SECTION 08305 ACCESS DOORS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFeatures and benefits. Precision made using cnc machinery to ensure accurate and unobtrusive installation.
Waldor 50, Tile-a-Door+, Maghatch, Combihatch Access covers for use in ceilings and tiled wall surfaces Steel access panels for accessing services within walls and ceilings. The Maghatch and Combihatch
More informationWhy Choose Karp Associates?
Access Doors Why Choose Karp Associates? Karp Associates, Inc., founded in 1956 at its present location in Maspeth, Queens, actually has roots dating back to 1925 when Karp Metal Products was founded in
More informationInsulated Fire-Rated Access Door Model(s): BIT/BIW/BIP
Insulated Fire-Rated Access Door INSTALLATION, OPERATION & MAINTENANCE MANUAL Table of Contents Insulated Fire-Rated Access Door Table of Contents General Description...3 Installation...4-7 Operation...8
More informationSECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationRoof Accessories. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents
Roof Accessories Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 www.bestmaterials.com Email: Sales@BestMaterials.com Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationAluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
More informationCustom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ask us how Ramco can now fabricate hardware on all manufacturers blank doors in 2 weeks or less. ramcometals.com got lead times? Ramco offers custom
More informationC S I S E C T I O N STAINLESS STEEL DOORS AND FRAMES SPECIFICATIONS
This section is based on products manufactured by Next Door Company, at the following address: 1840 North Commerce Parkway Suite 1 Weston, FL 33326-3200 tel. (954) 772-6666 or (888) 791 4450 fax (954)
More informationCentral Dartmouth Section Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Dartmouth, NS
Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Part 1 General 1. RELATED SECTIONS 1. Section 07 92 10 Joint Sealing 2. Section 08 71 00 Door Hardware 2. REFERENCES 1. American Society
More informationSECTION GYPSUM BOARD
SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable
More information1. Section Steel Doors and Frames. 2. Section Flush Wood Doors 3. Section Aluminum Storefront Doors.
PROPOSED ALTERATIONS FOR REIMS PINECREST 124, LLC PINECREST, FLORIDA SECTION 08710 DOOR HARDWARE PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Mechanical door hardware for the following: B. Related
More informationSOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information7520 Casement Windows
Full casement Single casement Double-bottom casement Double casement FULL DOUBLE CASEMENT - Min 1 9 1 6 Max 3 0 5 0 or 2 6 6 0 CASEMENT W/ PICTURE - Min 4 6 1 6 Max 12 0 6 0 with 30 vent set - Minimum
More informationfolding wall, fixed panels and Architect: David Easton
PK-30 System is a meticulously designed and engineered aluminum demountable wall system providing a flexible, environmentally friendly and cost effective way to divide interior space. The System can be
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationCUSTOMWOOD. taccess.com.au ACCESS PANELS (APC) Trafalgar has the most extensive range of access panels available:
ACCESS PANELS (APC) taccess.com.au Trafalgar has the most extensive range of access panels available: Small Sizes Large Sizes Custom Sizes Tileable Security Acoustic Fire Rated Stainless Steel Upward Opening
More informationB. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.
SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationPage 1 PRODUCT DESCRIPTION SECTION SECTIONAL OVERHEAD DOORS MODEL 900 PRODUCT FEATURES
2016-03-24 Page 1 SECTION 08360 SECTIONAL OVERHEAD DOORS DESCRIPTION MODEL 900 PRODUCT FEATURES Sectional steel overhead doors, industrial grade heavy duty construction. BASIC USES / RELATED USES Sectional
More informationAluminum Flush Doors and Frames SPECIFICATIONS. Section [8120] PART 1 GENERAL
Aluminum Flush Doors and Frames SPECIFICATIONS Section 081116 [8120] Cline Aluminum Doors, Inc. 112 32nd Avenue West Bradenton, FL 34205-8907 Toll-Free (800) 648-6736 Office (941) 746-4104 Fax (941) 746-5153
More informationMODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
More informationUNIVERSAL. Weight Max Panel Weight: 130kg. Parameters Panel Width: Max 1300mm Glass Thickness: 8-12mm
PIVOT DOOR SYSTEMS UNIVERSAL With its broad spectrum of basic types and variants, the Universal range of patch fittings enables the realisation in toughened glass of almost any conceivable design. Toughened
More informationALL-ALUMINUM DOOR & WINDOW FRAMING
ALL-ALUMINUM DOOR & WINDOW FRAMING WITH INTEGRATED ALUMINUM DOOR STOP SECTION 08 41 13 ALUMINUM FRAMED ENTRANCES AND STOREFRONTS SPECIFICATION PART 1 GENERAL 1.1 SECTION INCLUDES: A. Prefinished aluminum
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 22 13 (August 2016) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 22 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationSTEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN
STEEL STUD, TRIMS AND ACCESSORIES FOR DRYWALL CONSTRUCTION MONTREAL TORONTO CALGARY EDMONTON VANCOUVER THE STRENGTH WITHIN STEEL STUD AND TRACK FOR DRYWALL PARTITIONS TAKE ADVANTAGE OF THE SAVINGS IN TIME
More information1-3/4 Whisper Core Door Systems
1-3/4 TESTED AND IN COMPLIANCE WITH ASTM E90, ASTM E413, ASTM E1332, & ASTM E2235. DOOR SYSTEMS ARE IN COMPLIANCE WITH HMMA 865-03 & SDI-128 SPECIFICATIONS. COMPLETE WITH PERIMETER SOUND SEALS, BOTTOM
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationArchitectural Specifications, Section Phenolic Lockers
Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.
More informationModel 4010 Individual Panels / Curve & Diverter
Model 4010 Individual Panels / Curve & Diverter Introduction: The following three (3) part specification offers the Standard and Optional features for the Model 4010 Curve & Diverter Operable Wall System.
More informationUniversity Apartments on Brooklyn PROJECT MANUAL
Section 122100 Horizontal Louver Blinds University Apartments on Brooklyn PART 1 - GENERAL 1.1 SECTION INCLUDES A. Horizontal slat louver blinds. B. Operating hardware. 1.2 RELATED SECTIONS A. Section
More informationGYPSUM BOARD SECTION GYPSUM BOARD PART 1 - GENERAL
13686.00 GYPSUM BOARD 092116-1 1.1 RELATED DOCUMENTS: SECTION 092116 - GYPSUM BOARD PART 1 - GENERAL A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division
More informationSPECIFICATION GUIDE SLIDING CLOSET DOOR PART 1 - PRODUCT
SPECIFICATION GUIDE SLIDING CLOSET DOOR INTERIOR SLIDING GLASS DOOR PART 1 - PRODUCT 1.1 MANUFACTURER A. COXUSA 4755 E. Zinfandel Court, Suite D Ontario, California 91761 909.545.8900 eddie.coxusa@icloud.com
More informationPlanogram Name: 1 Bay Hinge_2013_STD_Cut-In L-R_HH V
Planogram Name: Bay - - Hinge STD_Cut-In L-R_HH V ft in Page: Date Created: // Effective date: // Layout Type: THD Bay Hinge STD_Cut In L R_HH V Planogram Name: Bay - - Hinge STD_Cut-In L-R_HH V Product
More informationNorthpointe Renovation EPN #1701 F/A Project #17027 September 8, 2017
SECTION 055213 - PIPE AND TUBE RAILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information2000 POCKET DOOR TECHNICAL DATA
2000 POCKET DOOR TECHNICAL DATA KWIK-WALL... One Source for Wall Systems. KWIK-WALL s s for the 2000 Series - Steel Panel operable wall systems answer the challenge for space division needs posed by multi-purpose
More informationA. Submit the following in addition to the standard requirements.
SECTION [13120] OMNIFLEX 300 MODULAR WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete modular wall system including,
More informationSECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
More informationFIRE RATED. taccess.com.au CEILING ACCESS PANELS (FRC) Trafalgar has the most extensive range of access panels available:
CEILING ACCESS PANELS (FRC) taccess.com.au Trafalgar has the most extensive range of access panels available: Small Sizes Large Sizes Custom Sizes Tileable Security Acoustic Fire Rated Stainless Steel
More informationThe GlasRoc Shaftliner Type X advantage...
C e r t a i n T e e d SHAFTLINER F o r A r e a S e p a r a t i o n F i r e w a l l s Shaftliner S Type X for Area Separation GlasRoc Shaftliner is a specially formulated product for applications where
More informationGas Fireplaces. P36D-10 Gas Fireplace. Unit Dimensions With Vignette Faceplate. *** Important: Framing height requires consideration of the hearth
28-15/16 (735mm) Model P36D-NG10 P36D-LP10 Fuel Type Natural Gas Propane Gas Fireplaces Minimum Supply Pressure Manifold Pressure - High Manifold Pressure - Low 5 W.C. (1.25 kpa) 3.8 W.C. (0.95 kpa) 1.1
More information.1 Underwriters' Laboratories of Canada (ULC)..1 CAN/ULC-S102-M88(R2000), Surface Burning Characteristics of Building Materials and Assemblies.
Place D Orléans Transitway Section 10 11 35 1231 Place D Orléans Dr, Ottawa, ON. SLIDING DISPLAY BACKDROPS City of Ottawa Project No. CR008042 Page 1 of 2 1 GENERAL 1.01 REFERENCES.1 Underwriters' Laboratories
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More informationSECTION ACOUSTICAL PANEL CEILINGS
SECTION 095113 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPH6000. Key Features
Phenolic Locker Series PH6000 Key Features ½ inch doors and end panels Durable, backed by a 20 year warranty. Ideal choice for wet-use areas including pools and recreation centers Graffiti resistant, permanent
More information8.7 PSYCH PREFERRED MANUFACTURER LIST
2101 Commonwealth Blvd, Suite B Ann Arbor, MI 48105-5759 www.med.umich.edu/facilities/plan/ 8.7 PSYCH PREFERRED MANUFACTURER LIST This list is a compilation of products that have proven successful on Michigan
More informationACOUSTICAL ACOUSTICAL. Page
lesser scaups - also known as Bluebills These are the most common Scaup... The other Greater Scaup much less common and only slightly different. For all intends and purposes these are the "Bluebills" hunters
More informationContainer Installation Guide
Continuous Insulation Container Installation Guide Panels and InSerts The InSoFast CX Container panel and the InSerts are designed to fit most shipping containers. Containers have three types of corrugations:
More informationSECTION GYPSUM BOARD ASSEMBLIES
SECTION 09 21 16 GYPSUM BOARD ASSEMBLIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Metal stud wall and ceiling framing, 20 gauge. B. Metal channel suspended ceiling framing. C. Gypsum board. D. Gypsum sheathing.
More information3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows
3275 & 3275U, 3285 & 3285U Vertical Sliding, Double-Hung Windows 3000 SERIES FIBERGLASS - Min 1 6 2 9 Max 4 0 7 0 - Min 3 0 2 9 Max 8 0 7 0 Double-Hung Double Double-Hung - Min 4 6 2 9 Max 12 0 7 0 Minimum
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationBENCHMARK Evolution Axis
Sheet List EVO VT 00 B DIRECTION OF PREVAILING WIND VERTICAL PANEL JOINT & FASTENER LOCATIONS DIRECTION OF LAY FACTORY APPLIED WEATHER SEAL CONCEALED PANEL FIXING NOTE: FASTENER NUMBERS DEPEND ON THE ACTUAL
More informationSeries Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Pivot Top-Hinged Fixed Series 510 retains an AAMA Architectural
More informationFire Door Installation
FA LCON PANEL PRODUCTS LTD 14.1 It is vital that performance doorset are installed by competent tradesmen and It is strongly recommended that the installer is a member of a recognised quality assurance
More informationWALL CEILING FACADE ACCESSORIES ACCESS PANELS CONTACT CLICK TO START
CLICK TO START About Knauf Metal Knauf Metal is part of the Knauf Group, leaders in lightweight construction materials, and a major supplier and manufacturer of metal building systems to the Australian
More informationThe S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM. Expanding spaces to the extraordinary
The S.10 ALL ALUMINUM LIFT & SLIDE DOOR SYSTEM Expanding spaces to the extraordinary Overview Elevation View of a 4-panel Lift & Slide Door System - Stacked Configuration Panda s Lift & Slide Door Systems
More informatione. Cutouts and Holes for Toilet Accessories: Made to template and edge-reinforced.
TOILET COMPARTMENTS GENERAL INFORMATION 1.1 Unless otherwise directed by CU Facilities toilet compartments shall be floor-supported, and urinal screens shall be wall hung, with anchoring devices and accessories
More informationDesign & Construction Standards, Revised January
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationCOOK COUNTY ILLINOIS CONTRACT FOR WORK DOCUMENT NO Countywide Warehouse and Records Storage Center Hawthorne Project TKB No.
SECTION 092900 GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationFoldingAccess Series Aluminum Folding Door System
HORTON AUTOMATICS - ARCHITECTURAL SPECIFICATIONS, 1/2008 FoldingAccess Series 4-4200 Aluminum Folding Door System DIVISION 08 - OPENINGS SECTION 08 42 29.13 FOLDING AUTOMATIC ENTRANCES Specifier Note:
More informationThe Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage
The Ashland Project Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage The garage and bedroom extend from the front of this three bedroom home, drawing you visually into the entryway. Brick and stucco
More informationStandard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT
NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-4290 FAX www.norlake.com Kold Locker Walk-Ins Standard
More informationSection BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
More informationCasement Windows Montecito New Construction Window
Casement Windows Montecito New Construction Window Full casement Double-bottom casement FULL DOUBLE/SINGLE DOUBLE CASEMENT - Min 1 6 1 0 Max 3 0 5 0 or 2 6 6 0 CASEMENT - Min 3 0 1 6 Max 6 0 5 0 or 5 0
More informationCONTRACT NUMBER: W912DQ-08-C % CORRECTED DESIGN 28 JULY 2008
SECTION 092900 - GYPSUM BOARD 1.1 SUMMARY A. This Section includes the following: 1. Interior gypsum board. 2. Tile backing panels. B. Related Sections include the following: 1. Division 06 Section "Rough
More informationCHAPTER 26 PLASTIC SECTION BC 2601 SECTION BC 2603 GENERAL FOAM PLASTIC INSULATION
CHAPTER 26 PLASTIC SECTION BC 2601 GENERAL 2601.1 Scope. These provisions shall govern the materials, design, application, construction and installation of foam plastic, foam plastic insulation, plastic
More informationSECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members.
SECTION 10155 TOILET COMPARTMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Plastic laminate partitions. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Concealed steel support members. B. Section
More informationSECTION SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08360 SECTIONAL OVERHEAD DOORS 522 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Glazed Aluminum
More informationTORNADO DOOR SERIES Model FEMA 361
TORNADO DOOR SERIES Model FEMA 361 This Door Stands Up to Tornado Force Winds And Protects With Higher Security Features Lower Bolt Panic Bar Adjustable Hinges Feature: Benefit: Panels: Manganese Plate
More informationAccordion Doors / Zone 2. Woodfold Accordion Door Guide for Commercial and Residential Installations Detailed Architectural Shop Drawings Available
SINCE 1957 Accordion Doors / Zone 2 Woodfold Accordion Door Guide for Commercial and Residential Installations Detailed Architectural Shop Drawings Available Suggested List Prices / All Continental States
More informationSECTION COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES
SECTION 10712 COMPOSITE EXTERIOR SHUTTERS AND ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES A. Functional exterior shutters. B. Exterior shutter hardware. 1.2 RELATED SECTIONS A. Section 09900 - Paints
More informationRoof Hatches Smoke Vents. Complementary B u i l d i n g Products
Roof Hatches Smoke Vents Complementary B u i l d i n g Products Roof Hatches Nystrom Roof Hatches and Scuttles are manufactured to solve all of your roof access needs. Custom sizing, materials, and color
More informationDIVISION 8 DOORS & WINDOWS
Section Title 08000 GENERAL INFORMATION 08100 HOLLOW METAL DOORS AND FRAMES 08110 Steel Doors and Frames Door Frames Doors 08200 WOOD AND PLASTIC DOORS 08250 Door Opening Assemblies 08300 SPECIAL DOORS
More informationDIVISION 10 SPECIALTIES SECTION OPERABLE PARTITIONS
DIVISION 10 SPECIALTIES SECTION 10 22 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
More informationContainer Installation Guide
Container Insulation Container Installation Guide Panels and Inserts The InSoFast CX Container panel and the Inserts are designed to fit most shipping containers. Containers have three types of corrugations:
More informationFRAMES. TELL MANUFACTURING, INC Page
FRAMES TELL MFG offers SPARTAN FRAMES in 16 gauge galvannealed steel. Frames are knock-down construction and are designed to be installed on standard and non-standard wall sizes over pre-finished or unfinished
More informationAlply CLASSIC WALL Architectural Insulated Panel Wall System
SECTION 07 42 13 INSULATED METAL WALL PANELS ALPLY Insulated Panels Alply CLASSIC WALL Architectural Insulated Panel Wall System PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Smooth, non-embossed steel, insulated
More informationAcousti-Seal Encore Paired Panel (10650) Operable Partitions
Acousti-Seal Encore Paired Panel 10 22 26 (10650) Operable Partitions Optimal choice for straight-line openings that do not require multiple locations or offset storage Panels are hinged together in groups
More informationFire Dampers. Required information:
Fire Dampers Description: Fire dampers are designed to restrict the spread of fire through ventilation systems by snapping shut when the fusible link melts. 1. What are the dimensions of the damper? Width
More informationSeries 510-I Thermal Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510-I Thermal 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Fixed Series 510-I retains an AAMA Architectural
More informationBuilt to Order. Stile. Frames. Section Contents. Profiles. Elevations. Double Egress Frames Pocket Frames
Frames Section Contents General Frame Construction Profiles F-1.0 Typical Jamb & Sill Profiles F-2.0-2.1 Frame Welding Elevations F-3.0 Frame Elevations F-4.0-4.2 Custom Frame Elevations Panel Types +
More informationAwning Windows Montecito New Construction Window
Awning Windows Montecito New Construction Window Full awning Double-top awning Double awning Double-bottom awning FULL DOUBLE BOTTOM/TOP DOUBLE AWNING - Min 1 3 1 4 Max 4 6 3 0 AWNING - Min 3 0 1 6 Max
More informationBEARING METAL STUD FRAMING
L-1 Section 05410 Long Form Specification LOAD BEARING METAL STUD FRAMING This section includes axially loaded steel studs, with unique slotted top channels, usually of 0.91, 1.2 and 1.5 mm (16, 18, or
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationSection SECTIONAL INSULATED STEEL DOORS
1 GENERAL 1.1 GENERAL REQUIREMENTS General Conditions and Division 01 apply to this section. 1.2 RELATED WORK Section 05500: Miscellaneous Metal Fabrication Section 07900: Joint Sealers Section 09900:
More informationBID # ELLIS MIDDLE LOCKERS
BID # 20140729 ELLIS MIDDLE LOCKERS The Sumner County Board of Education, herein known as School System, is soliciting bids for the purchase and installation of new lockers. The vendor must include cost
More informationSPACE TYPE: PHYSICAL FITNESS (EXERCISE ROOM)
SPACE TYPE: PHYSICAL FITNESS (EXERCISE ROOM) Construction Criteria The unit costs for the Physical Fitness Center (Exercise Room) space type are based on the construction quality and design features in
More information