SECTION MATERIAL AND EQUIPMENT

Transcription

1 SECTION MATERIAL AND EQUIPMENT PART 1 GENERAL 1.01 DESCRIPTION A. Work of this section includes: 1. Products 2. Transportation and handling 3. Storage and protection 4. Repairs and Replacements 5. Product options 6. Substitutions 7. Spare requirements 7.8. SEPTA-furnished construction material 1.02 RELATED WORK A. SEPTA Agreement B. Section Summary of Work C. Section Regulatory Requirements and Safety D. Section Submittals E. Section Quality Requirement 1.03 QUALITY ASSURANCE: A. The Contractor shall include in its Quality Assurance Program such procedures as are required to assure full protection of work and materials MANUFACTURER S RECOMMENDATIONS: A. The Contractor shall comply with manufacturers recommendations on product handling, storage, and protection except as noted in the Contract Documents or otherwise approved by the SEPTA Project Manager EXISTING MATERIALS AND PRODUCTS A. The Contractor shall not reuse materials and equipment removed from existing premises, except as specifically permitted by the Contract Documents. Addendum June 25, 2015

2 B. The Contractor shall provide interchangeable components of the same manufacture, for components being replaced TRANSPORTATION AND HANDLING A. The Contractor shall transport and handle products in accordance with manufacturer s instructions. B. The Contractor shall promptly inspect shipments to ensure that products comply with requirements, quantities are correct, and products are undamaged. C. The Contractor shall provide equipment and personnel to handle products by methods to prevent soiling, disfigurement, or damage. D. The Contractor shall deliver products to the job site in their manufacturer s original container, with labels intact and legible. 1. The Contractor shall maintain packaged materials with seals unbroken and labels intact until time of installation. 2. The Contractor shall promptly remove damaged material and unsuitable items from the job site, and promptly replace with material meeting the specified requirements, at no additional cost to SEPTA. E. SEPTA may reject, as non-complying, such material and products that do not bear satisfactory identification as to manufacturer, grade, quality, and other pertinent information. F. The SEPTA Project Manager reserves the right to require the contractor to turn over copies of all bills of lading, packing slips, labels and other material which establishes that material delivered to the job site match the material requirements of the construction documents STORAGE AND PROTECTION A. The Contractor shall store and protect products in accordance with manufacturers instructions, with seals and labels intact and legible. B. The Contractor shall store sensitive products in weather tight, climate controlled enclosures. C. For exterior storage of fabricated products, the Contractor shall place on sloped supports, above ground. D. The Contractor shall make off-site arrangements for storage and staging, and deliver material to the site as required so as not to affect work progress of other contractors and create unsafe conditions. Addendum June 25, 2015

3 E. The Contractor shall protect all finished surfaces and equipment. F. The Contractor shall provide protection for finished floor surfaces prior to allowing equipment or materials to be moved over such surfaces. G. The Contractor shall maintain finished surfaces and equipment clean, unmarred, and suitably protected until final acceptance by SEPTA REPAIRS AND REPLACEMENTS: A. In event of damage, the Contractor shall promptly make replacements and repairs at no additional cost to SEPTA. B. Additional time required to secure replacements and to make repairs will not be considered by SEPTA as justification for extension to contract time PRODUCT OPTIONS A. Products specified by reference standards or by description only: Any Product meeting those standards or description may be used regardless of manufacturer. B. Products specified by naming one or more manufacturers: Products of manufacturers named no options or substitutions allowed, except as otherwise provided in the Contract Documents SPARES A. Complete Spare Systems - As part of its bid for the base contract, the Contractor shall include complete spare systems. The quantity of spare systems shall equal 10% of the total number of systems supplied (but not less than 2 of any item). These spare systems shall be delivered before the end of the Warranty period. B. The Contractor shall be responsible for the supply of spare parts used prior to the end of the Warranty Period. C. With its bid, the Contractor shall submit a list of additional spare parts, with recommended quantities and unit pricing, for future spare parts purchases by SEPTA. SEPTA shall have the option to increase the quantity of parts or modify the list to add or delete specific line items SEPTA-FURNISHED CONSTRUCTION MATERIAL A. SEPTA will furnish the construction material listed below for the Contractor to install on the Project. B. Switch Machines Addendum June 25, 2015

4 Equipment Manufacturer Quantity M23-B style switch machines Right Hand #N ASTS 4 M23-B style switch machines Left Hand #N ASTS 4 C. Signal Heads Equipment Manufacturer Quantity COLORLIGHT CLS ASPECT LGRY #EM-7541-CL01 Safetran/Siemens 17 FOUNDATION,WAYSIDE DWARF SIG. # X Safetran/Siemens 17 BASE, 5" SPLIT w/ JCT Box ALUMINUM # X Safetran/Siemens 17 MAST 5" AL 10' # Safetran/Siemens 17 Mounting Bracket TOM 5" # X Safetran/Siemens 17 Horizontal Number Plate and Bracket # S white on Safetran/Siemens 3 black Horizontal Number Plate and Bracket # S white on Safetran/Siemens 3 black Horizontal Number Plate and Bracket # N white Safetran/Siemens 3 Horizontal Number Plate and Bracket # N white Safetran/Siemens 3 Horizontal Number Plate and Bracket # A6N white Safetran/Siemens 1 Horizontal Number Plate and Bracket # B6N white Safetran/Siemens 1 Horizontal Number Plate and Bracket # N white Safetran/Siemens 1 Horizontal Number Plate and Bracket # BLANK (4spaces) black Safetran/Siemens 2 D. Switch Rod Packages Equipment Manufacturer Quantity G&B Specialties X - Right Handed Layout, M-23B G&B Specialties 4 Single Switch G&B Specialties X- Left handed Layout, M-23B Single Switch G&B Specialties 4 C. PART 2 PRODUCTS This Part not used in this Section. PART 3 EXECUTION This Part not used in this Section. Addendum June 25, 2015

5 END OF SECTION Addendum June 25, 2015

6 THIS PAGE IS INTENTIONALLY BLANK Addendum June 25, 2015