Chapter 3. System accessories. Topics. 13 System accessories. Notes. 3.4 Visedge DS vinyl securing strip Accessory diagrams 14
|
|
- Kelley Fox
- 6 years ago
- Views:
Transcription
1 13 System accessories Chapter 3 System accessories Topics 3.1 Accessory diagrams Gulley angles and edges Visedge VR vinyl securing strip Visedge DS vinyl securing strip Finishing details Gradus stair nosings 18
2 System accessories Accessory diagrams 0.08 (mm ) 0.08 (mm) 0.15 (3.mm) 1 (5mm) 1 (5mm) 1 (5mm) Joint cover strip 75mm - Gradus EJC75/0 0.7 (16.5mm) 0.75 (17mm) 0.7 (16.5mm) Joint cover strip 50mm - Gradus EJC50/0 1 (5mm) 1 (5mm) 1 (5mm) Joint cover strip 75mm - Gradus EJC75/3 White plastic 1 3 /16 Black plastic Visedge VR 50mm (1.97 ) Visedge DS Aluminum 0.08 (mm) 0.65 (16mm) 0.0 (5mm) 1.65 (4mm) 0.75 (17mm) 1.65 (4mm).375 (9.50mm) 1.00 (5mm) (4.5mm) (4.75mm) Cap strip - C4 Cap strip - C7 Stainless steel cap strip 0.08 (mm) 0.31 (8mm) (16mm) 1.75 (45mm) 1.75 (45mm) 1.5 (38mm).75 Cove stick - 0R 1 (4mm) radius 0.31 (8mm) Cap strip - C Cap strip - C (38mm) Cove stick - 38R 1.75 (45mm) radius
3 15 System accessories 3. Gulley angles and edges 0.80" (1mm) 0.10" (.5mm) 1.15" (8mm) 1.15" (8mm) 0.10" (.5mm) 1" (5mm) 0.5" (6mm) 0.75" 0.5" (6mm) 0.75" Altro gulley angle - GA35/5 Altro gulley edge - GE 35RE Altro gulley edge - GE 5RE Altro sheet flooring Heat-welded joint Altro sheet flooring Heat-welded joint AltroMastic Altrofix 30 Altrofix 30 Gulley angle GE 35RE/5RE 8 mm Gulley angle GA35/5 0mm.5mm gulley angle for multi-purpose use with.5 or 3.5 thick floors Altro gulley angle - GA35/5 Altro gulley edge - GE 5RE Altro gulley edge - GE 35RE 0 mm 6 mm 8 mm 0 mm 6 mm 3.3 Visedge VR vinyl securing strip Visedge VR is to be used when abutting a raised square edge such as quarry tile or a raised floor sink. The Visedge VR is installed butt up against the raised edge, and the back is then patched/ramped down from the height of the Visedge down to a zero edge using a moisture tolerant cementitious patch. Then the is installed up over the patch and up against the plastic insert that is part of the Visedge, then grooved and heat-welded to the plastic insert.
4 System accessories 16 Visedge VR vinyl securing strip diagram Ceramic tiles Hot welded joint Altro sheet flooring co-extruded locking pvc insert with rigid base and flexible upstand for bonding and welding respectively to vinyl flooring edge trim is pre-drilled and countersunk to accept moisture tolerant No. 10 screw moisture tolerant patch housing depth 5/16 patch structural slab or 1 3/16 welded joint aluminum alloy retainer for pvc extrusion hard paving e.g. ceramic tiling existing floor screed PVC insert lead or plastic anchor may be required structural slab or existing floor screed section at paving junction 3.4 Visedge DS vinyl securing strip Visedge DS is an over the top reducer threshold to finish a raw edge of Altro flooring where it needs to transition down to zero, such as a doorway threshold or where is stopping and the concrete continues without any floor on top of it. Visedge DS is designed to securely anchor the perimeter of the. Section at paving junction aluminum diminishing strip edge trim is pre-drilled and countersunk to accept No. 10 screw 1/16 lead or plastic anchor may be required existing floor finish
5 17 System accessories 3.5 Finishing details Altro Whiterock vinyl panels or similar Most sound and dry substrates Silicone sealant (by wall contractor) Altro C-4 cap strip Altro C-7 cap strip Sit on cove AltroMastic Min. 4" (100mm) Self cove Sit on cove detail C-4 detail C-7 detail Altro weldrod 1.15" (8mm) Existing floor Glazed wall tile or vinyl wall cladding Masonry nail fixing hole drilled in vinyl first Altro C-8 cap strip Existing Wall Finish AltroMastic Quarry tile skirting or similar existing skirting Altro C-11 cap strip Ceramic tile bullnose overlap WSBU00 Sanitary sealant Approved Altro gulley edge Saw cut 0.75" deep x 0.16" (4mm) wide install gulley edge using Altrofix 30 or approved polyurethane Gulley edge detail Most sound and dry substrates Quarry tile floor C-8 detail C-11 detail Ceramic tile bullnose overlap detail
6 System accessories Gradus stair nosings A range Channel: Mill finish aluminum Insert: Xtra-Grip, Interior or Exterior Gauge: Typically used with resilient flooring Profiles: Dimensions shown are nominal. Illustrations are full size in mm Products subject to minor design alterations without notice Fusion bonded inserts supplied with capping plugs to conceal screw heads after fixing AS11 65 AS10 ramp back Ramp back profiles are suitable for use on steps where no floor covering is used. When used with resilient flooring ramp AKS0A ramp back back profiles should be installed on top of the floor covering. AS0 ramp back 3 7 ADM1 recommended trim: TA5B, TA4 Community Design Registration No ADM AS11 recommended trim: TA58, TA ADM AS19 recommended trim: TA5B, TA AS1 recommended trim: TA5B, TA4 Color availability Aluminum Channel: Mill finish - can also be supplied polished, anodised or chromed. Xtra-Grip: Blueprint, Carbon, Deepsea, Hunter, Iceberg, Oat, Pebble, Rock, Truffle, Vapor, Zest. Interior Insert: Alpine, Burgundy, Buttercup, Canvas, Cloud, Coffee, Evergreen, Glacier, Ink, Jet, Lavender, Lead, Linen, Midnight, Nutmeg, Ocean, Photoluminescent (only available to suit channels with a 50mm insert), Poppy, Sage, Snowdrift, Steel, Storm, Veranda. Interior Insert: Grained: Black, Bluebell, Drawn, Drove, Granite. 9 3
Detailing guide for senior living facilities
Detailing guide for senior living facilities Creating an integrated system with Altro flooring and wall cladding is an ideal solution for areas in which hygiene and water resistance are a top concern.
More informationfloors Altro sheet flooring installation guide Updated 12/20/ USA / CAN
Altro sheet flooring installation guide 800 377 5597 USA / 800 565 4658 CAN support@altrofloors.com www.altro.com TECHNICAL>TRAINING ACADEMY>FlOORS INSTALL GUIDE floors Updated 12/20/17 For technical support
More informationSafety flooring the complete system
Technical Information Safety the complete system Safety the complete system Altro safety Altro Everlay Adhesive Screed Concrete sub-floor Preparation of sub-floors Sub-floors must be dry, sound and free
More informationMANUFACTURER S SPECIFICATIONS Section LIME CONCRETE. A. This section describes the requirements for floors and slabs on grade.
MANUFACTURER S SPECIFICATIONS Section 03330 LIME CONCRETE ST. ASTIER NATURAL HYDRAULIC LIME CONCRETE PART 1 GENERAL 1.01 General A. This section describes the requirements for floors and slabs on grade.
More informationARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE
ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box
More informationSECTION RESILIENT SHEET FLOORING
SECTION 09 65 16 RESILIENT SHEET FLOORING SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1.
More informationCTC PROFILES FOR CARPET
CTC PROFILES FOR CARPET Install one of CTC Carpet Trims whenever you need a transition between carpet and hard/soft surface flooring. TILE TO CARPET TRANSITIONS Provide anodized aluminum strip with reveal
More informationAn introduction to Altro Walls products, accessories and fittings.
An introduction to Altro Walls products, accessories and fittings. call: 01502 561364 e-mail: walls@altro.com or explore www.altro.com Altro Walls, 48 Pinbush Road, South Lowestoft Ind. Estate, Lowestoft,
More informationRESILIENT FLOORING
RESILIENT FLOORING 09650-1 SECTION 09650 RESILIENT FLOORING Part 1 General RELATED DOCUMENTS: Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1
More informationSECTION IMPACT RESISTANT WALL PROTECTION
SECTION 10265 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Impact-Resistant Wall Protection including Wall guards,
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More informationSpecification Floor-To-Ceiling Solid Plastic Toilet Compartments
Specification Floor-To-Ceiling Solid Plastic Toilet Compartments PART 1 GENERAL 1.01 SUBMITTALS A. Plastic compartment work includes the following, where indicated: 1. Floor-to-ceiling compartments. B.
More informationToggle Adjustable Tables Price List. August 20, 2014 Updated March 25,
Toggle Adjustable Tables Price List August 20, 2014 Updated March 25, 2015 800-424-2432 2 General Information TOGGLE TABLE Laminate; 1-1/4" round vinyl bullnose edge; 1-1/2" radius corner (54B) Laminate;
More informationTrans-Edge. Heavy-Duty Stair & Floor System suitable for heavy traffic exterior & interior environments
Trans-Edge Heavy-Duty Stair & Floor System suitable for heavy traffic exterior & interior environments October 2013 Trans-Edge The Gradus Heavy-Duty Stair & Floor System offers a hard wearing solution
More informationSchluter -KERDI-DRAIN
Schluter -RONDEC Finishing and edge-protection profile with a rounded reveal surface. Schluter -RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces.
More information84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components.
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING
More informationSelecting Cover Systems
Selecting Cover Systems Construction Specialties offers a wide variety of expansion joint covers for every joint size, movement requirement and finish material you may encounter. Selecting the proper cover
More informationB. Store products in dry spaces protected from the weather, with ambient temperatures maintained between 50 and 90 deg F (10 and 32 deg C).
SECTION 09651 - RESILIENT TILE FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationstairnosings PVC profiles skirtings & trims
Uniclass EPIC L21+L61 CI/SfB (3)+() D3/3+E81 X July 2015 stairnosings PVC profiles skirtings & trims stair nosings 3 premiumquality aluminium stair nosings: standard gauge Standard gauge aluminium stair
More informationSECTION EXPANSION JOINT COVER ASSEMBLIES
SECTION 07 95 13 EXPANSION JOINT COVER ASSEMBLIES SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Do not use aluminum, brass, or bronze
More informationB5B SERIES CRL SMOKE BAFFLE SYSTEMS
NET SIZE 15/16" B5B SERIES CRL CRL ARE DESIGNED TO PROVIDE AN ALMOST INVISIBLE TEMPERED SMOKE CURTAIN. MANY OF TODAY'S FIRE CODES REQUIRE LARGE OFFICES OR RETAIL AREAS TO BE BROKEN DOWN INTO SMALLER, MORE
More informationCONTRACT NUMBER: W912DQ-08-C % CORRECTED DESIGN 28 JULY 2008
SECTION 092900 - GYPSUM BOARD 1.1 SUMMARY A. This Section includes the following: 1. Interior gypsum board. 2. Tile backing panels. B. Related Sections include the following: 1. Division 06 Section "Rough
More informationProduct Guide Specification
ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com
More informationSTUCCO FAILURES and REMEDIATION Roger G. Morse AIA
STUCCO FAILURES and REMEDIATION Roger G. Morse AIA Morse Zehnter Associates Rensselaer Technology Park 165 Jordan Road Troy, NY 12180 rgmorse@mzaconsulting.com Florida Environment Hot Humid High ground
More informationSECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationAppendix 3 Treads. design elements
Appendix 3 s design elements A3 42 rise 165 Appendix 3 s A3 design This is a reference guide to standard treads used in the Arden Elements range. Many custom staircases will demand their own unique tread
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationNew Veneers Allow Greater Flexibility
New Veneers Allow Greater Flexibility A number of new veneer systems are being used with exterior insulation or standard insulation batts to create panels that are easily applied, provide outstanding insulation
More informationSliding Patio Doors Brickmould Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/8 Scale 2-WideSlidingPatioDoors... 7-4 GlazingOptions: 3 Scale... 7-5 Grille Patterns... 7-6 SectionDetails: 6 Scale...
More informationSECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationAluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
More informationRESILIENT TILE FLOORING
SECTION 09660 RESILIENT TILE FLOORING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 09665 - Sheet Vinyl Floor System. 3. 08710 - Finish Hardware. 4. 15421 - Drains
More informationSECTION GYPSUM BOARD
SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable
More informationEDGEWATER, FLORIDA JUNE 14, 2010
SECTION 09 2400 - PORTLAND CEMENT PLASTER PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More information1. Decks, balconies, and sun porches 2. Walkways, ramps, and stairways 3. Patios and courtyards
SECTION 07185 TRAFFIC MEMBRANE PART 1 GENERAL 1.1 SECTION INCLUDES A. Traffic membrane, consisting of welded seam PVC waterproofing, over f following surfaces: 1. Decks, balconies, and sun porches 2. Walkways,
More information1. Interior gypsum wallboard. 2. Exterior gypsum board panels for ceilings and soffits. 3. Tile backing panels.
SECTION 09260 - GYPSUM BOARD ASSEMBLIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUniversity Apartments on Brooklyn PROJECT MANUAL
Section 122100 Horizontal Louver Blinds University Apartments on Brooklyn PART 1 - GENERAL 1.1 SECTION INCLUDES A. Horizontal slat louver blinds. B. Operating hardware. 1.2 RELATED SECTIONS A. Section
More informationSection PANEL SIGNAGE
Section 10 14 23 PANEL SIGNAGE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including FDOT DIVISION I GENERAL REQUIREMENTS & COVENANTS Specification Sections,
More informationTILE TILE
09300 - TILE 09300-1 PART ONE: GENERAL 1.1 Description TILE 1.1.1 Work of this Section, as shown or specified, shall be provided by the Interior Contractor and shall be in accordance with the requirements
More informationCOOK COUNTY ILLINOIS CONTRACT FOR WORK DOCUMENT NO Countywide Warehouse and Records Storage Center Hawthorne Project TKB No.
SECTION 092900 GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationCOMPOSITE (WPC) ENGINEERED VINYL FLOORING INSTALLATION
COMPOSITE (WPC) ENGINEERED VINYL FLOORING INSTALLATION PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE YOU BEGIN INSTALLATION! IMPROPER INSTALLATION WILL VOID WARRANTY. STOP! WPC Engineered Vinyl Flooring
More informationChapter 4. Adhesives, tapes and sealants. Topics. 19 Adhesives, tapes and sealants. Notes. 4.4 Contact adhesives and double faced tapes 22
19 Adhesives, tapes and sealants Chapter 4 Adhesives, tapes and sealants Topics 4.1 Adhesive recommendations 20 4.2 Polyurethane adhesives 22 4.3 Acrylic adhesives 22 4.4 Contact adhesives and double faced
More informationBioPrism Solid Surface
Please read all instructions before installing products. STORAGE & HANDLING: Check for damage that may have occurred during transit. Keep receptor flat on pallet, as it was shipped, until ready to install.
More informationGRP Flat Roofing Edge Trims
GRP Flat Roofing Edge Trims Compatible with GRP, rigid and flexible polyester, polyurethane, acrylic and alkyd systems. Trim Brochure and Technical Specification Guide General Information The Easy To Use
More informationThe City of Winnipeg SECTION ST. VITAL LIBRARY RENOVATION PROJECT 6 FERMOR AVE. Page 1 of 5
The City of Winnipeg SECTION 05 50 00 METAL FABRICATIONS ST. VITAL LIBRARY RENOVATION PROJECT 6 FERMOR AVE. Page 1 of 5 Part 1 General 1.1 REFERENCES.1 American Society for Testing and Materials International,
More informationENGINEERED WATERPROOF FLOORING GENERAL INSTALLATION INSTRUCTIONS FOR VÄLINGE 2G LOCKING FLOORING
ENGINEERED WATERPROOF FLOORING GENERAL INSTALLATION INSTRUCTIONS FOR VÄLINGE 2G LOCKING FLOORING SITE CONDITIONS Always store the boxes of Engineered Waterproof Flooring (EWF) on a flat and level surface;
More informationCEILING & WALL SYSTEMS
CEILING & WALL SYSTEMS Axiom Perimeter Trim Commercial Ceilings and Walls Solutions Guide Axiom Perimeter Trim AXIOM Trim The Axiom family of products provide functional and visual options in ceiling design.
More informationSTAIRCARE ARCHITECTURAL COMMERCIAL PRACTICAL EFFECTIVE SAFE
STAIRCARE ARCHITECTURAL COMMERCIAL PRACTICAL EFFECTIVE SAFE Immediate solutions to improving safety and compliance. Manufacturer of stair treads, anti slip flooring and accessories. Supplying the specialist
More informationA. ASTM C190 - Test Method for Tensile Strength of Hydraulic Cement Mortars
SECTION 04850 (04 40 00) MSI PRECAST STONE VENEER SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. MSI Precast Stone Veneer for exterior and interior vertical surfaces. 1.2 RELATED SECTIONS Specifier Notes:
More informationJ41 Reinforced bitumen membrane roof coverings
J41 Reinforced bitumen membrane roof coverings To be read with Preliminaries/General conditions. A comprehensive waterproofing system comprising two reinforced bituminous membranes fully adhered to thermal
More informationSECTION ROOF ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 72 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationGenovations Deck and Rail Specification Brochure
Genovations Deck and Rail Specification Brochure 301-791-5577 Table of Contents Genovations railing SQUARE RAILING 6'&8' 1 DELUXE SQUARE RAILING 6'&8' 2 SQUARE & DELUXE SQUARE RAILING 10' 3 COLONIAL RAILING
More informationPLYWOOD FLOATING FLOOR
PLYWOOD FLOATING FLOOR Read First These suggestions represent generally accepted procedures for successful installation of Enka Building Products. These instructions may be followed, modified, or rejected
More informationA. Drawings and general provisions of the Contract apply to this Section including all documentation provided in RFP#
SECTION 096466 - WOOD ATHLETIC FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section including all documentation provided in. 1.2 SUMMARY
More informationSECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
More informationALTRO WHITEROCK CHAMELEON Architectural Guide Specification CSI/CSC SectionFormat [3-part] CSI PageFormat
ALTRO WHITEROCK CHAMELEON Architectural Guide Specification CSI/CSC SectionFormat [3-part] CSI PageFormat Altro 80 Industrial Way, Wilmington, MA 01887 USA Toll Free: 800.377.5597 Fax: 978.694.0433 1731
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: COMPOSITE WALL PANELS REPORT HOLDER: 3A COMPOSITES USA INC.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1114 Reissued 09/2017 This report is subject to renewal 09/2019. DIVISION: 07 00
More informationC S I S E C T I O N STAINLESS STEEL DOORS AND FRAMES SPECIFICATIONS
This section is based on products manufactured by Next Door Company, at the following address: 1840 North Commerce Parkway Suite 1 Weston, FL 33326-3200 tel. (954) 772-6666 or (888) 791 4450 fax (954)
More informationArchitectural Details. Walls. Including PVC cove, UL Listed Raceway, & Integration to Flooring. AES Pharma Wall & Walk-On Ceiling Cleanroom System
Architectural Details Section One Walls Including PVC cove, UL Listed Raceway, & Integration to Flooring AES Pharma Wall & Walk-On Ceiling Cleanroom System Architectural Components AES PHARMA SYSTEM AES
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More informationSECTION TERRAZZO FLOOR TILE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 66 16 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ----- // if not applicable to project. Also delete any other item or
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPOROUS (ABSORBENT) SUBFLOORS. (most wood subfloors and some concrete)
Adhesive Recommendations for Altro Flooring PRODUCT Safety Sheet Flooring POROUS (ABSORBENT) SUBFLOORS (most wood subfloors and some concrete) Altrofix 30/31/300 (CANADA) (excessively heavy rolling loads
More informationB. Related Sections: 1. Division 07 Section "Joint Sealants" for sealing of expansion, contraction, control, and isolation joints in tile surfaces.
SECTION 093000 - CERAMIC TILE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION ROOF SPECIALTIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 71 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationB. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.
SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationM12 RESIN FLOORING. To be read with Preliminaries/ General Conditions TYPE(S) OF FLOORING 110A RESIN FLOORING
M12 RESIN FLOORING To be read with Preliminaries/ General Conditions TYPE(S) OF FLOORING 110A RESIN FLOORING - Project: - Location: - Substrate: - Preparation: - Resin flooring system: - Manufacturer:
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationArchitectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION Section 08520 Aluminum Windows PART 1: WORK INCLUDED A. The conditions of the contract and applicable sections of Division
More informationFloor Insulation Underlayment Section Sound Control Matting
Floor Insulation Underlayment Section 09618 Sound Control Matting Part I General 1.1 Summary A. Section includes a sound control material for achieving an STC and IIC rating in excess of 50 to meet building
More informationby Rollfab Metal Products
by Rollfab Metal Products SECTION 07460 ALUMINUM SIDING AND SOFFITS PART 1 GENERAL 1.2 RELATED SECTIONS 1.3 REFERENCES A. SECTION INCLUDES B. Aluminum Siding. C. Aluminum Soffits. D. Aluminum trim and
More informationSECTION CERAMIC TILE. B. Ceramic tile wall finishes including standard and custom designs.
SECTION 09 30 13 CERAMIC TILE PART 1 GENERAL 1.1 SECTION INCLUDES A. Ceramic tile floor and base finishes. B. Ceramic tile wall finishes including standard and custom designs. 1.2 REFERENCES A. ANSI/TCNA
More informationSECTION HVAC GRAVITY VENTILATORS
SECTION 23 37 23 HVAC GRAVITY VENTILATORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More informationSECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)
SECTION 13125 ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck) PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSeries 3000 Pocket Doors
Series 3000 Pocket Doors Introduction: The following three (3) part specification offers the Standard and Optional features for the Series 3000 Pocket Doors. The yellow highlighted areas in the specification
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
More informationOver 20 years experience of high quality commercial hygienic wall and ceiling cladding supplies. Quality you can trust
Over 20 years experience of high quality commercial hygienic wall and ceiling cladding supplies Quality you can trust In association with - the hygienic cladding specialists HPS is proud to announce the
More informationENKASONIC FLOOR UNDERLAYMENT 9110
ENKASONIC FLOOR UNDERLAYMENT 9110 GS1197 Section 13080 SECTION 09618 SOUND CONTROL MATTING Part I General 1.1 Summary A. Section includes a sound control material for achieving an STC and IIC rating in
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 092500 - GYPSUM BOARD PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More informationMarch 26, 2017 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
March 26, 2017 Page 1 DESCRIPTION PRODUCT FEATURES Factory fabricated metal wall or soffit cladding with related flashings and accessory components. Online brochure available at: http://www.lenmak.com.
More informationNOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION. MASTERFORMAT SECTION (Mortarless Concrete Brick Veneer)
NOVABRIK MORTARLESS CONCRETE BRICK VENEER SPECIFICATION MASTERFORMAT SECTION 04818 (Mortarless Concrete Brick Veneer) Spec_USA_En_18102005.doc 12/1/2005 Novabrik Page 2 Section 04818 NOVABRIK MORTARLESS
More informationSECTION DECORATIVE STAINLESS STEEL DRAINS AND GRATES
PART 1 - GENERAL 1.1 SUMMARY: SECTION 05 70 00 MODERN DESIGN LINEAR DRAINS DECORATIVE STAINLESS STEEL DRAINS AND GRATES EDITING NOTE: DELETE SYSTEMS AND MATERIALS THAT ARE NOT REQUIRED FOR THE PROJECT.
More informationSPECIFICATIONS: Architectural Aluminum Railings
PART ONE: GENERAL 1.1 SUMMARY SPECIFICATIONS: Architectural Aluminum Railings A. Work in this section includes custom and standard Interior and Exterior aluminum railings and guardrails. 1.2 PERFORMANCE
More information***************************************************************************************************************
09330 QUARRY TILE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 09 30 16 ***************************************************************************************************************
More informationPage 1 of 5
SPECIFICATIONS COMPOSITE MATERIAL PANEL SYSTEM ESTOLGA 1000 DRY SEAL SYSTEM PART 1 GENERAL 1.01 SECTION INCLUDES A. Exterior cladding consisting of formed metal composite material (MCM) sheet, secondary
More informationGUIDELINES FOR SANITARY DESIGN AND CONSTRUCTION OF MILK PRODUCTS PLANTS (rev )
Milk and Dairy Food Safety Branch 1220 N Street, Sacramento, CA 95814 GUIDELINES FOR SANITARY DESIGN AND CONSTRUCTION OF MILK PRODUCTS PLANTS (rev. 10-20-2011) The outline below lists sanitary requirements
More informationTrench Duct Class Catalog 5230CT9601R10/08
5230CT9601R10/08 2009 Class 5230 CONTENTS Application.................................................5 Unassembled Trench Duct Components.........................6 Factory Assembled Trench Duct..............................11
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationSECTION ACOUSTICAL PANEL CEILINGS
SECTION 095113 ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information1. The subfloor must be structurally sound and able to withstand live and dead loads with a deflection limitation of L/360.
HARDWOOD FLOOR Read First These suggestions represent generally accepted procedures for successful installation of Maxxon Products. These instructions may be followed, modified or rejected by the owner,
More informationFlexLok Adhesive Tabs for Carpet Tile
FlexLok Adhesive Tabs for Carpet Tile INSTALLATION EcoFlex ICT EcoFlex NXT 160 South Industrial Blvd. Calhoun, GA. 30701 MohawkGroup.com Technical Services Department 508 East Morris St. Dalton, GA 30721
More informationAluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
More informationAluminum Flush Doors and Frames SPECIFICATIONS. Section [8120] PART 1 GENERAL
Aluminum Flush Doors and Frames SPECIFICATIONS Section 081116 [8120] Cline Aluminum Doors, Inc. 112 32nd Avenue West Bradenton, FL 34205-8907 Toll-Free (800) 648-6736 Office (941) 746-4104 Fax (941) 746-5153
More informationATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 05/08/2016 Issued: 08/12/2015 Visit www.ati-es.com for current status Page 1 of 21 Fiber Composites,
More informationSpecifiers: Click on the icon in the WORD toolbar to reveal detailed instructions
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions (Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying perforated
More informationF.C.L. INTERIOR FINISHES CHECK LIST 2010 PRODUCT SELECTION - FLOORING GENERAL ITEMS PRODUCT SELECTION GENERAL ITEMS
INTERIOR FINISHES CHECK LIST 2010 Project: Project Number: Wil-Spec # This should not take long to go through, most questions below are listed as options, all you have to do is check off those answers
More informationSECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
More information