HOLLOW METAL FRAMES, SEE SCHEDULE AND FRAME ELEVATIONS MS COMMONS SCHOOL CODE: MS COMMONS - NORTH B MS COMMONS PAINTED GYP.

Transcription

1 A. PAINTED GYP. SOFFIT, SEE REFLECTED CEILING PLAN A.9 A. MS COMMONS. A. PAINTED GYP. SOFFIT, SEE REFLECTED CEILING PLAN CWL CWL A. MS COMMONS. CWL PAINTED CMU, COLOR SCHEME MS COMMONS. A.9 CWL PAINTED GYP. SOFFIT, SEE REFLECTED CEILING PLAN PAINTED CMU, COLOR SCHEME MAIN LEVEL " MAIN LEVEL " Architect-reproduced printed, bound and numbered specifications, Architect-reproduced printed, bound and numbered blue- or black-line prints, addenda, post-bid addenda, and change orders only. Documents reproduced by parties other than the Architect, whether in hard copy or in electronic format, shall not be considered part of the contract documents and do not supersede the provisions of the contract documents. The contractor, subcontractors, vendors and suppliers are solely responsible for verification that information utilized in bidding, development of shop drawings, and construction of the facility are A.9 PAINTED CMU, COLOR SCHEME L PAINTED GYP. SOFFIT, SEE REFLECTED CEILING PLAN MS COMMONS. HMD MS COMMONS. PAINTED CMU, COLOR SCHEME HVA A HMH PAINTED GYP. HOLLOW METAL FRAME BEYOND, SEE MS COMMONS. A. MS COMMONS. PAINTED CMU, COLOR SCHEME F K MAIN LEVEL " MAIN LEVEL " POST BID ADD. NO. (--) POST BID ADD. NO. (--) POST BID ADD. NO. (--) Copyright (c) // :: AM C:\Documents and Settings\bsm\My Documents\Projects\ Bacon\-Bacon-_bsm.rvt INTERIOR ELEVATIONS SCHOOL CODE: - MS COMMONS - NORTH B A.9 SCALE: /" = '-" MS COMMONS - NORTH A A.9 SCALE: /" = '-" MS COMMONS - SOUTH A A.9 SCALE: /" = '-" MS COMMONS - SOUTH B A.9 SCALE: /" = '-" NOVEMBER, A.9

2 P A. LIGHT FIXTURES SUSPENDED ALONG ANGLE OF ROOF, SEE REFLECTED CEILING PLANS EXPOSED PRE-ENGINEERED STRUCTURE PAINTED GYP. VERIFY MIN " MIN " /" GYP. BD. SOFFIT ON MTL. STUD " O.C. MAX. T.O.M. GYM ' - " RETRACTABLE BASKETBALL GOALS AUXILIARY GYM PAINTED CMU, COLOR SCHEME ' - " ' - " ' - " VERIFY MIN " Architect-reproduced printed, bound and numbered specifications, Architect-reproduced printed, bound and numbered blue- or black-line prints, addenda, post-bid addenda, and change orders only. Documents reproduced by parties other than the Architect, whether in hard copy or in electronic format, shall not be considered part of the contract documents and do not supersede the provisions of the contract documents. The contractor, subcontractors, vendors and suppliers are solely responsible for verification that information utilized in bidding, development of shop drawings, and construction of the facility are EXISTING SCOREBOARD, VERIFY DIMENSIONS AND COORDINATE SOFFIT ACCORDINGLY. CENTER OVER OPENING BELOW. RETRACTABLE BLEACHERS ATHLETIC WALL PAD MAIN LEVEL " A. PAINTED GYP SOFFIT /" GYP. BD. SOFFIT ON MTL. STUD " O.C. MAX. RETRACTABLE BASKETBALL GOALS RETRACTABLE BASKETBALL GOALS AUXILIARY GYM A RETRACTABLE BLEACHERS T.O.M. GYM ' - " EXPOSED ROOF STRUCTURE PAINTED CMU, COLOR SCHEME MAIN LEVEL " POST BID ADD. NO. (--) POST BID ADD. NO. (--) POST BID ADD. NO. (--) Copyright (c) // :: AM C:\Documents and Settings\bsm\My Documents\Projects\ Bacon\-Bacon-_bsm.rvt INTERIOR ELEVATIONS SCHOOL CODE: - AUX GYM - EAST A. SCALE: /" = '-" AUX GYM - NORTH A. SCALE: /" = '-" NOVEMBER, A.

3 LIGHT FIXTURES SUSPENDED ALONG ANGLE OF ROOF, SEE REFLECTED CEILING PLANS EXPOSED PRE-ENGINEERED STRUCTURE PAINTED GYP. A. A. /" GYP. BD. SOFFIT ON MTL. STUD " O.C. MAX. DUCT SOCK, SEE MECHANICAL DRAWINGS BASKETBALL GOALS AUXILIARY GYM VERIFY MIN " MIN " EXISTING SCOREBOARD, VERIFY DIMENSIONS AND COORDINATE SOFFIT ACCORDINGLY. CENTER OVER OPENING BELOW. T.O.M. GYM ' - " RETRACTABLE BASKETBALL GOALS PAINTED CMU, COLOR SCHEME RETRACTABLE BLEACHERS ATHLETIC WALL PAD MAIN LEVEL " A. A. A. DUCT SOCK, SEE MECHANICAL DRAWINGS RETRACTABLE BASKETBALL GOALS RETRACTABLE BASKETBALL GOALS AWB AWB AWB AWB EXPOSED ROOF STRUCTURE DUCT SOCK, SEE MECHANICAL T.O.M. GYM ' - " PAINTED GYP. ALUMINUM WINDOWS, SEE PAINTED CMU, COLOR SCHEME MAIN LEVEL " VERIFY MIN " MIN " Architect-reproduced printed, bound and numbered specifications, Architect-reproduced printed, bound and numbered blue- or black-line prints, addenda, post-bid addenda, and change orders only. Documents reproduced by parties other than the Architect, whether in hard copy or in electronic format, shall not be considered part of the contract documents and do not supersede the provisions of the contract documents. The contractor, subcontractors, vendors and suppliers are solely responsible for verification that information utilized in bidding, development of shop drawings, and construction of the facility are DUCT SOCK, SEE MECHANICAL DRAWINGS /" GYP. BD. SOFFIT ON /" MTL. " O.C. POST BID ADD. NO. (--) POST BID ADD. NO. (--) POST BID ADD. NO. (--) Copyright (c) // ::9 AM C:\Documents and Settings\bsm\My Documents\Projects\ Bacon\-Bacon-_bsm.rvt INTERIOR ELEVATIONS SCHOOL CODE: - AUX GYM - WEST A. SCALE: /" = '-" AUX GYM - SOUTH A. SCALE: /" = '-" NOVEMBER, A.

4 SCHOOL CODE: - COMPOSITE PLAN - FOOTBALL B. POST BID ADD NO. (--) POST BID ADD NO. (--) (--) B. B. SCOREBOARD, N.I.C. SEE CIVIL \\Ds\home\\FB Concessions\A_ADDPOSTED_.rvt NOVEMBER, B. Copyright (c) // :9:9 AM COMPOSITE PLAN - FOOTBALL B. SCALE: " = '-" FOOTBALL SCOREBOARD IS NOT IN CONTRACT. SEE CIVIL FOR EXACT LOCATION. CONDUIT, POWER, AND DATA FOR SCOREBOARD IN CONTRACT.

5 WH. Concrete Blocks* - Various designs. Classification D- ( hr). See Concrete Blocks category for list of eligible manufacturers.. Mortar - Blocks laid in full bed of mortar, nom. / in. thick, of not less than -/ and not more than -/ parts of clean sharp sand to part Portland cement (proportioned by volume) and not more than percent hydrated lime (by cement volume). Vertical joints staggered.. Portland Cement Stucco or Gypsum Plaster - Add / hr to classification if used. Where combustible members are framed in wall, plaster or stucco must be applied on the face opposite framing to achieve a max. Classification of -/ hr. Attached to concrete blocks (Item ).. Loose Masonry Fill - If all core spaces are filled with loose dry expanded slag, expanded clay or shale (Rotary Kiln Process), water repellant vermiculite masonry fill insulation, or silicone treated perlite loose fill insulation add hr to classification.. Foamed Plastic* - (Optional-Not Shown) - -/ in. thick max, ft wide sheathing attached to concrete blocks (Item ). THE DOW CHEMICAL CO - Type Thermax *Bearing the UL Classification Mark Fire Resistance Ratings - ANSI/UL BXUVU9Design No. U9 Bearing Wall Rating - HR. Nonbearing Wall Rating - HR Load Restricted for Canadian Applications - See Guide BXUV /" Horizontal Section. Concrete Blocks* - Nominal by by in, hollow or solid. Classification D- ( hr). ANCHOR CONCRETE PRODUCTS INC GAGNE & SON CONCRETE BLOCK INC Allowable compressive stress of % of max allowable compressive stress in accordance with the empirical design method. OLDCASTLE APG NE DBA ARTHUR WHITCOMB WESTBROOK CONCRETE BLOCK CO INC Allowable compressive stress of.% of max allowable compressive stress in accordance with the empirical design method.. Mortar - Blocks laid in full bed of mortar, nom. / in. thick, of not less than -/ and not more than -/ parts of clean sharp sand to part Portland cement (proportioned by volume) and not more than percent hydrated lime (by cement volume). Vertical joints staggered.. Portland Cement Stucco or Gypsum Plaster - Add / hr to Classification if used. Attached to concrete blocks (Item ).. Foamed Plastic* - (Optional-Not Shown) - -/ in. thick max, ft wide sheathing attached to concrete blocks (Item ). THE DOW CHEMICAL CO - Type Thermax *Bearing the UL Classification Mark /" Horizontal Section Fire Resistance Ratings - ANSI/UL BXUVU9Design No. U9 Bearing Wall Rating - HR. Nonbearing Wall Rating - HR. Load Restricted for Canadian Applications - See Guide BXUV FINISHED FLOOR FLEXIBLE FIRE RATED SEALANT TRACK - ATTACH WITH ANCHORS '-" O.C. MAX. /" TYPE "X" RATED GYPSUM BOARD LAYERS EACH SIDE METAL STU " O.C. CEILING TRACK - ATTACH WITH ANCHORS '-" O.C. MAX ROOF DECK / FLOOR SLAB UL RATED SEALANT EACH SIDE MINERAL WOOL SAFING /" " " WALLS PERPEDICULAR TO DECK FLUTES /" NOM. " MAX.. Steel Floor and Ceiling Tracks - (Not Shown) - Top and bottom tracks of wall assemblies shall consist of steel members, min No. MSG (.9 in., min bare metal thickness) steel or min No. GSG (. in. thick) galv steel or No. MSG (. in. thick) primed steel, that provide a sound structural connection between steel studs, and to adjacent assemblies such as a floor, ceiling, and/or other walls. Attached to floor and ceiling assemblies with steel fasteners spaced not greater than in. O.C.. Steel Studs - Corrosion protected steel studs, min No. MSG (.9 in., min bare metal thickness) steel or min - / in. wide, min No. GSG (. in. thick) galv steel or No. MSG (. in. thick) primed steel, cold formed, shall be designed in accordance with the current edition of the Specification for the Design of Cold-Formed Steel Structural Members by the American Iron and Steel Institute. All design details enhancing the structural integrity of the wall assembly, including the axial design load of the studs, shall be as specified by the steel stud designer and/or producer, and shall meet the requirements of all applicable local code agencies. The max stud spacing of wall assemblies shall not exceed in. OC (or in. OC when Item C is used). Studs attached to floor and ceiling tracks with / in. long Type S- steel screws on both sides of studs or by welded or bolted connections designed in accordance with the AISI specifications.. Lateral Support Members - (Not shown) - Where required for lateral support of studs, support may be provided by means of steel straps, channels or other similar means as specified in the design of a particular steel stud wall system.. Gypsum Board* - Gypsum wallboard bearing the ULI Classification Marking as to Fire Resistance. Applied vertically with joints between layers staggered. Outer layer of layer construction may be applied horizontally. The thickness and number of layers and percent of design load for the min, hr, -/ hr and hr ratings are as follows: Interior Walls Wallboard Protection Both Sides of Wall - No. of Layers & Thkns % of Rating of Board In. Each Layers Design Load min * layer, / in. thick hr * layer, / in. thick -/ hr * layers, / in. thick hr * layers, / in. thick or * layers, / in. thick * layers, / in. thick *Ratings applicable to assemblies serving as exterior walls where Classified fire resistive gypsum sheathing type wallboard is substituted on the exterior face. Exterior Walls Wallboard Protection Both Sides of Wall - No. of Layers & Thkns % of Rating of Board In. Each Layers Design Load min layer, / in. thick hr layers, / in. thick -/ hr layers, / in. thick hr layers, / in. thick layers, / in. thick See Gypsum Board (CKNX) Category - for names of Classified Companies of / in. or / in. thick wallboard. See below for Classified Companies of / in. thick wallboard. CANADIAN GYPSUM COMPANY Types AR, IP-AR, IP-X, or ULTRACODE UNITED STATES GYPSUM CO Types AR, IP-AR, IP-X, or ULTRACODE USG MEXICO S A DE C V Types AR, IP-AR, IP-X, or ULTRACODE A. Gypsum Board - As an alternate to Item Nom. / in. thick gypsum panels, with square edges, applied horizontally. Gypsum panels fastened to framing with in. long bugle head steel screws spaced a max in. OC, with last screws / in. and in. from each edge of board. Horizontal joints need not be backed by steel framing. Horizontal edge joints and horizontal butt joints on opposite sides of studs on interior walls need not be staggered. Horizontal edge joints and horizontal butt joints in adjacent layers on interior walls (multilayer systems) staggered a min of in. TEMPLE-INLAND FOREST PRODUCTS CORP GreenGlas. Gypsum Sheathing - For exterior walls, / or / in. thick exterior regular gypsum sheathing applied vertically and attached to studs and runner tracks with in. long Type S- bugle head screws spaced in. OC. along studs and tracks. One of the following exterior facings are to be applied over the gypsum sheathing. A. Siding, Brick, or Stucco - Aluminum siding, steel siding, brick veneer, or stucco attached to studs over gypsum sheathing and meeting the requirements of local code agencies. When a min -/ in. thick brick veneer facing is used, the Exterior Wall Rating is applicable with exposure on either face. Brick veneer wall attached to studs with corrugated metal wall ties attached to each stud with steel screws, not more than each sixth course of brick. When a min -/ in. thick brick veneer facing is used, Foamed Plastic (Item ) may be used. B. Mineral and Fiber Boards* - Exterior hard board paneling, chemically treated over gypsum sheathing with primed or finished face, / in. thick by in. wide. Attached to studs over gypsum sheathing with -/ in. long bugle-head TEK fasteners in. OC at the intermediate supports Or, exterior lap siding, chemically treated, / in. thick by in. or in. wide. Attached to studs with -/ in. long, bugle-head Type TEK fasteners at each lap. Panels lapped minimum in. MASONITE CORP Type FT. C. Cementitious Backer Units* - / or / in. thick, square edge boards, attached to steel studs over gypsum sheathing with -/ in. long, Type S-, corrosion resistant, wafer head steel screws, spaced in. OC. Studs spaced a max of in. OC. Joints covered with glass fiber mesh tape. UNITED STATES GYPSUM CO Durock Exterior Cement Board or Durock Brand Cement Board. D. Fiber-Cement Siding - Fiber-cement exterior sidings including smooth and patterned panel or lap siding. E. Molded Plastic* - Solid vinyl siding mechanically secured to framing members in accordance with manufacturer's recommended installation details. ALSIDE, DIV OF ASSOCIATED MATERIALS INC HEARTLAND BUILDING PRODUCTS INC NEBRASKA PLASTICS INC. Fasteners - (Not Shown) - Screws used to attach wallboard to studs: self-tapping bugle head sheet steel type, spaced in. O.C. First layer Type S- by in. long for / and / in. thick wallboards and -/ in. long for / in. thick wallboard. Second layer Type S- by -/ in. long for / and / in. thick wallboards and -/ in. long for / in. thick wallboard. Third layer Type S- by -/ in. long.. Batts and Blankets* Placed in stud cavities of all exterior walls. May or may not be used in interior walls. Any glass fiber or mineral wool batt material bearing the UL Classification Marking as to Fire Resistance, of a thickness to completely fill stud cavity. See Batts and Blankets (BZJZ) Category for names of Classified Companies. A. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) - Spray applied cellulose material. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. Alternate application method: The fiber is applied with U.S. Greenfiber LLC Type AD hot melt adhesive at a nominal ratio of one part adhesive to. parts fiber to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. U S GREENFIBER LLC Cocoon Stabilized or Cocoon-FRM (Fire Rated Material). Joint Tape and Compound - (Not Shown) - Vinyl or casein, dry or premixed joint compound applied in two coats to joints and screw heads of outer layer. Perforated paper tape, in. wide, embedded in first layer of compound over all joints of outer layer. 9. Furring Channels - (Optional, not shown, for single or double layer systems) - Resilient furring channels fabricated from min MSG corrosion-protected steel, spaced vertically a max of in. OC. Flange portion attached to each intersecting stud with / in. long Type S- steel screws.. Foamed Plastic* - (Not Shown) - For use with brick veneer as outlined in Item A - Maximum in. thick rigid polystyrene insulation attached to studs with fasteners of sufficient length to penetrate the foam and / in. into the stud. A minimum in. air space is to be maintained between the outer surface of the foamed plastic and the inner surface of the brick veneer. OWENS CORNING SPECIALTY & FOAM PRODUCTS A. Mortar Drop Protection - (Optional, Not shown) - foamed plastic with mortar control device attached, continuous, by drainage holes at bottom of air space behind brick veneer. OWENS CORNING SPECIALTY & FOAM PRODUCTS WeepGuard. Cementitious Backer Units* - (Optional Item Not Shown -For Use On Face Of Hr Or Hr Systems With All Standard Items Required) - / in., / in., / in. or in. thick, min. in. wide.- Applied vertically or horizontally with vertical joints centered over studs. Fastened to studs and runners with cement board screws of adequate length to penetrate stud by a minimum of / in. for steel framing members, and a minimum of / in. for wood framing members spaced a max of in. OC. When ft. wide boards are used, horizontal joints need not be backed by framing. -Hr System - Applied vertically with vertical joints centered over studs. Face layer fastened over gypsum board to studs and runners with cement board screws of adequate length to penetrate stud by a minimum of / in. for steel framing members, and a minimum of / in. for wood framing members spaced a max of in. OC. NATIONAL GYPSUM CO Type PermaBase *Bearing the UL Classification Mark Fire Resistance Ratings - ANSI/UL BXUVU Design No. U (For Exterior Walls, Ratings Applicable) For Exposure To Fire On Interior Face Only, (See Items and ) Bearing Wall Rating - Min,, -/ or HR. (See Items and ) Load Restricted for Canadian Applications - See Guide BXUV a b c or e HORIZONTAL SECTION HORIZONTAL SECTION INTERIOR (FIRE) SIDE EXTERIOR WALL INTERIOR WALL. Floor and Ceiling Runners - (not shown) - Channel shaped runners, -/ in. wide (min), -/ in. legs, formed from min No. MSG galv steel, attached to floor and ceiling with fasteners spaced in. OC max.. Steel Studs - Channel shaped, -/ in. wide (min), -/ in. legs, / in. folded back returns, formed from min No. MSG galv steel spaced in. OC max.. Batts and Blankets* - (Optional) - Mineral wool or glass fiber batts partially or completely filling stud cavity. See Batts and Blankets (BZJZ) category for names of Classified companies. A. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) - Spray applied cellulose material. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. Alternate application method: The fiber is applied with U.S. Greenfiber LLC Type AD hot melt adhesive at a nominal ratio of one part adhesive to. parts fiber to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. U S GREENFIBER L L C - Cocoon Stabilized or Cocoon-FRM (Fire Rated Material) B. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) and Item A - Spray applied cellulose insulation material. The fiber is applied with water to interior surfaces in accordance with the application instructions supplied with the product. Applied to completely fill the enclosed cavity. Minimum dry density of. pounds per cubic ft. NU-WOOL CO INC - Cellulose Insulation. Gypsum Board* - / in. thick, ft wide, attached to steel studs and floor and ceiling track with in. long, Type S steel screws spaced in. OC. along edges of board and in. OC in the field of the board. Joints oriented vertically and staggered on opposite sides of the assembly. When attached to item (resilient channels) or A (furring channels), wallboard is screw attached to furring channels with in. long, Type S steel screws spaced in. OC. AMERICAN GYPSUM CO - Types AG-C, AGX- BEIJING NEW BUILDING MATERIALS PUBLIC LTD CO - Type DBX-. CERTAINTEED GYPSUM INC - Types, EGRG, ProRoc Type X, ProRoc Type C. CERTAINTEED GYPSUM CANADA INC - ProRoc Type C, ProRoc Type X or ProRoc Type Abuse-Resistant. CANADIAN GYPSUM COMPANY - Types AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. G-P GYPSUM CORP, SUB OF GEORGIA-PACIFIC CORP - Types, 9, C, DAP, DD, DA, DGG,, GPFS. LAFARGE NORTH AMERICA INC - Types LGFC, LGFCA, LGFC, LGFCA, LGFC-C, LGFC-C/A. NATIONAL GYPSUM CO - Types FSK, FSK-C, FSK-G, FSW-C, FSW-G, FSW, FSW-, FSW-. PABCO BUILDING PRODUCTS L L C, DBA PABCO GYPSUM - Type PG-C or PG-9. PANEL REY S A - Type PRX. SIAM GYPSUM INDUSTRY (SARABURI) CO LTD - Type EX- TEMPLE-INLAND FOREST PRODUCTS CORP - Type X, Veneer Plaster Base - Type X, Water Rated -Type X, Sheathing - Type X, Soffit - Type X, TG-C. UNITED STATES GYPSUM CO - Type AR, C, FRX-G, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. A. Gypsum Board* - (As alternate to Item ) - Nom / in. thick gypsum panels with beveled, square or tapered edges, applied vertically or horizontally. Vertical joints centered over studs and staggered one stud cavity on opposite sides of studs. Horizontal edge joints and horizontal butt joints on opposite sides of studs need not be staggered or backed. Panels attached to steel studs and floor runner with in. long Type S steel screws spaced in. OC when applied horizontally, or in. OC along vertical and bottom edges and in. OC in the field when panels are applied vertically. When used in widths other than in., gypsum panels to be installed horizontally. CANADIAN GYPSUM COMPANY - Types AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. UNITED STATES GYPSUM CO - T ype AR, C, FRX-G, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. B. Gypsum Board* - (As an alternate to Items or A) - Nom / in. thick, ft wide, installed as described in Item A with screw length increased to -/ in. CANADIAN GYPSUM COMPANY - Types AR, IP-AR. UNITED STATES GYPSUM CO - Types AR, IP-AR. USG MEXICO S A DE C V - Types AR, IP-AR.. Joint Tape and Compound - Vinyl, dry or premixed joint compound, applied in two coats to joints and screw heads; paper tape, in. wide, embedded in first layer of compound over all joints. As an alternate, nominal / in. thick gypsum veneer plaster may be applied to the entire surface of Classified veneer baseboard. Joints reinforced. Paper tape and joint compound may be omitted when gypsum boards are supplied with square edges.. Resilient Channel - (Optional-Not Shown) - MSG galv steel resilient channels spaced vertically max in. OC, flange portion attached to each intersecting stud with / in. long type S- panhead steel screws. A. Steel Framing Members (Not Shown)* - As an alternate to Item, furring channels and resilient sound isolation clip as described below: a. Furring Channels - Formed of No. MSG galv steel. -/ in. wide by / in. deep, spaced in. OC perpendicular to studs. Channels secured to studs as described in Item b. Ends of adjoining channels are overlapped in. and tied together with double strand of No. SWG galv steel wire near each end of overlap. As an alternate, ends of adjoining channels may be overlapped in. and secured together with two self-tapping # framing screws, min. / in. long at the midpoint of the overlap, with one screw on each flange of the channel. b. Steel Framing Members* - Used to attach furring channels (Item a) to studs (Item ). Clips spaced in. OC., and secured to studs with -/ in. wafer or hex head Type S steel screw through the center grommet. Furring channels are friction fitted into clips. PAC INTERNATIONAL INC - Type RSIC-.. Wall and Partition Facings and Accessories* - (Optional, Not shown) - Nominal / in. thick, ft wide panels, for optional use as an additional layer on one or both sides of the assembly. Panels attached in accordance with manufacturer's recommendations. When the QR- panel is installed between the steel framing and the UL Classified gypsum board, the required UL Classified gypsum board layer(s) is/are to be installed as indicated as to fastener type and spacing, except that the required fastener length shall be increased by a minimum of / in. Not evaluated or intended as a substitute for the required layer(s) of UL Classified Gypsum Board. QUIET SOLUTION INC - Type QuietRock QR-. *Bearing the UL Classification Mark Fire Resistance Ratings - ANSI/UL BXUVUDesign No. U Nonbearing Wall Rating - HR. FINISHED FLOOR FLEXIBLE FIRE RATED SEALANT TRACK - ATTACH WITH ANCHORS '-" O.C. MAX. /" TYPE "X" RATED GYPSUM BOARD LAYERS EACH SIDE METAL STU " O.C. CEILING TRACK - ATTACH WITH ANCHORS '-" O.C. MAX ROOF DECK / FLOOR SLAB UL RATED INTUMESCENT SEALANT EACH SIDE MINERAL WOOL SAFING /" " " WALLS PERPEDICULAR TO DECK FLUTES " MAX. " RATED WALL TAPE AND JOINT COMPOUND (TYP.) NON-RATED WALL HIGHER PRIORITY WALL HOUR RATED WALL METAL STU /" FIRE-SHIELD GYPSUM WALLBOARD HOUR RATED WALL TAPE AND JOINT COMPOUND (TYP.) HORIZ. TRUSS " O.C. VERT. " NOM. C.M.U. GROUT SOLID AROUND F.E. CABINET TYPE "A" CABINET FIRE EXTINGUISHER " NOM. C.M.U. B.N. B.N. NOTE: THIS DETAIL IS FOR EVERY TYPE 'A' IN A FIRE RATED WALL " C.M.U. HORIZ. TRUSS " O.C. VERT. TYPE "A" CABINET FIRE EXTINGUISHER USE ONLY WHERE WALL IS NOT FIRE RATED METAL " O.C., REFER TO PLANS FOR SIZE /" GYPSUM BOARD TYPE "A" CABINET FIRE EXTINGUISHER USE ONLY WHERE WALL IS NOT FIRE RATED " METAL " O.C. /" TYPE 'X' RATED GYP. BD. W/ HR. FIRE RATED BARRIERS & HR. FIRE RATED BARRIERS TYPE "A" CABINET FIRE EXTINGUISHER BUILDING ELEMENT TYPE I TYPE II TYPE III TYPE IV TYPE V A B A B A B A B Structural frame HT HT Bearing walls Exterior Interior /HT Non bearing walls and partitions Exterior See IBC Table Nonbearing walls and partitions Interior Floor construction Including supporting beams & joists Roof construction Including supporting beams & joists See Section.. HT HT e e e b b b b / c c, c, c, c, c, c, d d d d d d INTERNATIONAL BUILDING CODE TABLE FIRE-RESISTANCE RUIREMENTS FOR BUILDING ELEMENTS (hours) For SI: foot =. mm. a. The structural frame shall be considered to be the colums and the girders, beams, trusses and spandrels having direct connections to the colums and bracing members designed to carry gravity loads. The members of floor or roof panels which have no connection to the columns shall be considered secondary members and not a part of the structural frame. b. Roof supports: Fire resistance ratings of structural frame and bearing walls are permitted to be reduced by hour where supporting a roof only. c. Except in group F-, H, M and S- occupancies, fire protection of structutal members shall not be required, including protection of roof framing and decking where every part of the roof construction is feet or more above any floor immediately below. Fire-retardant-treated wood members shall be allowed to be used for such unprotected members. d. In all occupancies, heavy timber shall be allowed where a -hour or less fire-resistance rating is required. e. An approved automatic sprinkler system in accordance with section 9... shall be allowed to be substituted for -hour fire-resistance-rated construction, provided such system is not otherwise required by other provisions of the code or used for an allowable area increase in accordance with Section. or an allowable height increase in accordance with Section.. The - hour subtittution fot the fire-resistance of exterior walls shall not be permitted. f. Not less than the fire-resistance rating required by other sections of this code. g. Not less than the fire-resistance rating based on fire separation distance (see Table ). a g f N.F.P.A. : TYPE II () TRAVEL DISTANCE TO EXIT: ' MAX I.B.C.: TYPE V(B) - UNSPRINKLED ALLOWABLE AREA:, SF PER STORY SEE OCCUPANCY SCHEDULE FOR LOA MAXIMUM STORIES: DEAD EN: ' MAX NEW BUILDING TYPE: ASSEMBLY LEGEND DECK PARTITIONS EXTENDING TO BOTTOM OF ROOF FIRE EXTINGUISHER TYPE 'A' - NON-RATED WALLS AND PARTITIONS D FIRE RATED WALLS AND BARRIERS PARTITIONS AND NON- RATED WALLS ONE HOUR RATED BARRIER (LSC SECTION.., IBC SECTION AND/OR ) FIRE EXTINGUISHER TYPE 'B' - LOCATED IN ALL ELECTRICAL/MECHANICAL ROOMS GENERAL ITEMS FIRE EXTINGUISHER TYPE 'A' - RATED WALLS AND PARTITIONS TWO HOUR RATED BARRIER (LSC SECTION.., IBC SECTION AND/OR ) HOUR RATED FLOOR/ CEILING ASSEMBLY HORIZONTAL ASSEMBLIES HOUR RATED FLOOR/ CEILING ASSEMBLY CONCESSIONS HOME MEN VISITOR MEN VISITOR WOMEN HOME WOMEN JANITOR MECH/ELEC F.E. TYPE 'B' F.E. TYPE 'A' CLASS K Copyright (c) POST BID ADD NO. (--) POST BID ADD NO. (--) (--) // :9: AM SCHOOL CODE: - \\Ds\home\\FB Concessions\A_ADDPOSTED_.rvt LIFE SAFETY PLAN AND DETAILS - FOOTBALL NOVEMBER, B. SCALE: " = '-" B. UL NO. U SCALE: " = '-" B. UL NO. U SCALE: " = '-" B. HEAD OF WALL UL U SCALE: " = '-" B. UL NO. U SCALE: " = '-" B. UL NO. U SCALE: " = '-" B. HEAD OF WALL UL U SCALE: " = '-" B. 9 RATED WALL INTERSECTIONS SCALE: /" = '-" B. F. E. TYPE 'A' (RATED WALL) SCALE: /" = '-" B. FIRE EXTINGUISHER TYPE 'A' SCALE: /" = '-" B. FIRE EXTINGUISHER TYPE 'A' SCALE: /" = '-" B. F. E. TYPE 'A' (RATED WALL) SCALE: " = '-" B. IBC TABLE LIFE SAFETY NOTES A GENERAL NOTES IT SHALL BE THE RESPONSIBILTY OF THE GENERAL CONTRACTOR TO HAVE ON SITE A COPY OF ANY AND ALL UL DESIGNS OR REGULATIONS CITED BY, BUT NOT LIMITED TO; ARCHITECT, ENGINEER, MANUFACTURER OR SUBCONTRACTOR. WHERE UL DESIGN AND/OR STANDARD IS REFERENCED, THE SHALL BE PERFORMED IN FULL COMPLIANCE WITH THE REFERENCED DESIGN NUMBER AND/ OR STANDARD; UNLESS ALLOWED DESIGN OMISSIONS ARE NOTED AND/OR DETAILED TO REMAIN, OR ALLOWED DESIGNED OPTIONAL ITEMS ARE NOTED AND OR DETAILED AS MANDATORY RUIREMENTS FOR. WHERE FIRE PRODUCTS (INCLUDING BUT NOT LIMITED TO; SEALANTS, SPRAYS, FOAMS, INTUMESCENTS, OR CAULKING) ARE RUIRED, ALL MATERIALS SHALL BE FROM A SINGLE SOURCE SPECIFIED MANUFACTURER BRAND CORRELATING TO UL DESIGNS, AS DESIGNATED BY THE GENERAL CONTRACTOR PRIOR TO THE START OF. IT SHALL BE THE RESPONSIBILITY OF THE GENERAL CONTRACTOR TO COORDINATE AND ENSURE THAT ALL SUBCONTRACTORS ARE PROVIDING THE PROJECT DESIGNATED SINGLE SOURCE SPECIFIED MANUFACTURER BRAND. THE GENERAL CONTRACTOR IS RUIRED TO COMPLY WITH NFPA CODE. HE IS RESPONIBLE TO MEET ALL TEMPORARY EGRESS RUIREMENTS AS STATED BY THE AUTHORITY HAVING JURISDICTION. THE OWNER AND ARCHITECT SHALL BE NOTIFIED BUSINESS DAYS PRIOR TO ANY CHANGES IN EGRESS. ALL FIRE EXTINGUISHERS REGARDLESS OF TYPE ARE CLASS ABC POUND UNLESS NOTED. ANY RESIDENTIAL STOVE OR COMMERCIAL COOKING UIPMENT SHALL HAVE LEAST ONE CLASS K EXTINGUISHERS LOCATED NO LESS THEN '-" FROM A POINT OF USE. CODES ENFORCED BUT NOT LIMITED TO THE FOLLOWING - IBC, IFC, IMC, IPC, OF THE ICC ED. AND IECC OF THE ICC 9 ED. - WITH GEORGIA DCA AMENDMENTS; NFPA LSC, ED., NATIONAL FIRE CODE ED. W/ -- GEORGIA MIN. FIRE SAFETY STD. B PARTITIONS AND NON RATED WALLS EXTEND ALL DECK PARTITIONS (- D -) TO FLOOR/CEILING/ROOF DECK ASSEMBLY CHANGING FROM CMU TO METAL STUD AT " ABOVE CEILING UNLESS NOTED OR DETAILED OTHERWISE. METAL STUD SIZE SHOULD MEET THE MINIMUM SPECIFIED RUIREMENT WITH GYPSUM BOARD ON BOTH SIDES & ACOUSTICAL BATT; TAPED AND SEALED WITH COMPOUND AND ACOUSTICAL SEALANTS TO MEET A LEVEL FINISH. SEAL OPENINGS, PENETRATIONS & INTERSECTIONS TO RESIST SOUND TRANSFERENCE. ALL CONCRETE MASONRY WALLS & METAL STU WITH GYPSUM BOARD PARTITIONS NOT OTHERWISE NOTED OR DETAILED SHALL EXTEND A MINIMUM OF " ABOVE HIGHEST ADJACENT CEILING. C RATED WALLS/BARRIERS UNLESS NOTED OR DETAILED OTHERWISE, EXTEND ALL FIRE RATED WALLS/BARRIERS TO FLOOR/CEILING/ROOF DECK ASSEMBLIES. SEAL BETWEEN WALL/BARRIER AND THE ASSEMBLY WITH MATERIALS SPECIFIED & RUIRED TO MAINTAIN INDICATED RATING. WHERE A HORIZONTAL FIRE RATED ASSEMBLY IS INSTALLED & RATING OF ASSEMBLY UALS OR EXCEE RATING OF WALL/BARRIER, FIRE RATED WALL/BARRIER SHALL TERMINATE AT " ABOVE FIRE RATED ASSEMBLY UNLESS DETAILED OR NOTED OTHER WISE. SEAL ALL PENETRATIONS THROUGH RATED PARTITIONS AND ASSEMBLIES WITH FIRE PRODUCT MATERIAL AND METHO RUIRED TO MAINTAIN RATINGS USING UL DESIGNS AND/OR STANDAR, AS RUIRED BY THE AUTHORITIES HAVING JURISDICTION. & HOUR RATED WALL/BARRIERS SHOWN TO EXTEND TO UPPER FLOOR/ROOF DECKS SHALL CHANGE FROM CMU TO RATED GYPUM BOARD ON METAL STUD AT " ABOVE RATED ASSEMBLIES UNLESS OTHERWISE SHOWN, NOTED OR DETAILED. FIRE RATED MASONRY WALLS SHALL HAVE MASONRY MANUFACTURED IN ACCORDANCE WITH UL #. & HOUR RATED MASONRY WALLS SHALL COMPLY WITH UL #U9 & #U9. HOUR RATED NON-BEARING METAL STUD PARTITIONS SHALL COMPLY WITH UL #U AS PUBLISHED WITH THE EXCEPTION TO THE LAST LINE OF ITEM. JOINT TAPE AND COMPOUND. REGARDLESS OF THE TYPE OF GYPSUM BOARD EDGE SUPPLIED, PAPER TAPE AND JOINT COMPOUND SHALL NOT BE OMITTED. JOINT TREATMENT SHALL MEET MIN. UL RUIREMENT AND MEET A LEVEL FINISH OR GREATER. & HOUR RATED METAL STUD WALLS, BARRIERS, AND/OR PATITIONS SHALL COMPLY WITH UL #U. JOINT TREATMENT SHALL MEET MIN. UL RUIREMENT AND A LEVEL FINISH OR GREATER. D HORIZONTAL ASSEMBLIES HOUR RATED HORIZONTAL CEILING ASSEMBLY AT THE CORD OF TRUSS SHALL BE CONSTRUCTED WITH / FURRING CHANNELS RUNNING PERPENDICULAR TO THE TRUSS WITH LAYERS OF / TYPE X GYP BOARD WITH ALTERNATING SEAMS OF AT LEAST, TAPED AND SEALED WITH PLASTER TO MEET A LEVEL FINISH OR GREATER. SEAL BETWEEN ASSEMBLY WITH MATERIALS SPECIFIED & RUIRED TO MAINTAIN INDICATED RATING. HOUR RATED HORIZONTAL CEILING ASSEMBLY AT THE CORD OF TRUSS SHALL BE CONSTRUCTED WITH / FURRING CHANNELS RUNNING PERPENDICULAR TO THE TRUSS WITH LAYERS OF / TYPE X GYP BOARD WITH ALTERNATING SEAMS OF AT LEAST, TAPED AND SEALED WITH PLASTER TO MEET A LEVEL FINISH OR GREATER. SEAL BETWEEN ASSEMBLY WITH MATERIALS SPECIFIED & RUIRED TO MAINTAIN INDICATED RATING. SCALE: /" = '-" B. LIFE SAFETY PLAN - CONCESSIONS CONCESSIONS 9 SF

6 B. B. FUTURE BLEACHERS B. B. SCOREBOARD, N.I.C. (CONDUIT AND COORDINATION IN CONTRACT), SEE CIVIL FUTURE BLEACHERS B. B. B. B. FLAG POLE, SEE CIVIL FOR EXACT LOCATION. B. SCOREBOARD, N.I.C. (CONDUIT AND COORDINATION IN CONTRACT), SEE CIVIL BASEBALL SCOREBOARD (N.I.C.) TO BE LOCATED IN LEFT FIELD. SOFTBALL SCOREBOARD (N.I.C.) TO BE LOCATED IN RIGHT FIELD. SEE CIVIL FOR EXACT LOCATIONS. CONDUIT, POWER, AND DATA FOR BOTH SCOREBOAR INCLUDED IN CONTRACT. POST BID ADD NO. (--) POST BID ADD NO. (--) (--) Copyright (c) // :: AM \\Ds\home\\BB-SB Concessions\B_central-ADDposted_.rvt COMPOSITE PLAN -BASEBALL AND SOFTBALL SCHOOL CODE: - COMPOSITE PLAN LEVEL NORTH B. SCALE: /" = '-" NOVEMBER, B.

7 ZONE B ZONE C ZONE B 9 SF ZONE B 9 SF NO. LEGEND FIRE RATED WALLS AND BARRIERS D TWO HOUR RATED BARRIER (LSC SECTION.., IBC SECTION AND/OR ) ONE HOUR RATED BARRIER (LSC SECTION.., IBC SECTION AND/OR ) PARTITIONS AND NON- RATED WALLS HORIZONTAL ASSEMBLIES GENERAL ITEMS ROOM NAME DECK PARTITIONS EXTENDING TO BOTTOM OF FLOOR/CEILING/ ROOF DECK ASSEMBLY ONE HOUR RATED HORIZONTAL ASSEMBLY, SEE LIFESAFETY NOTE D- FIRE EXTINGUISHER TYPE 'A' - NON-RATED WALLS AND PARTITIONS FIRE EXTINGUISHER TYPE 'B' - LOCATED IN ALL ELECTRICAL/MECHANICAL ROOMS LIFE SAFETY SCHEDULE AREA ZONE OCCUPANT TYPE OCCUPANT OCCUPANT FACTOR LOAD CONCESSIONS SF ZONE A BUSINESS SF. WOMEN SF ZONE A BUSINESS SF. 9 SF ZONE A BUSINESS SF.9 PRESS BOX SF ZONE A BUSINESS SF. ELECTRICAL UIPMENT SF ZONE A BUSINESS SF. MEN SF ZONE A BUSINESS SF. SF ZONE A BUSINESS SF. ZONE A. UIPMENT ASSEMBLY (USED BY K-) SEE OCCUPANCY SCHEDULE FOR ROOM LOA EXISTING TYPE: I.B.C.: TYPE V(B) - UNSPRINKLED ALLOWABLE AREA N.F.P.A. : TYPE V () F.E. TYPE 'B" TRAVEL DISTANCE TO EXIT: ' MAX. DEAD EN: ' MAX HOME DUGOUT - SOFTBALL GB GB TOOL, SF DRESSING LIFE SAFETY PLAN - HOME DUGOUT, BASEBALL B. SCALE: /" = '-" BUSINESS NO LEGAL INTERIOR OCCUPANT LOA EXISTING TYPE: F.E. TYPE 'B' I.B.C.: TYPE V(B) - UNSPRINKLED ALLOWABLE AREA N.F.P.A. : TYPE V () UIPMENT TRAVEL DISTANCE TO EXIT: ' MAX. DEAD EN: ' MAX HOME DUGOUT - BASEBALL TOOL 9, SF DRESSING LIFE SAFETY PLAN - HOME DUGOUT, SOFTBALL B. SCALE: /" = '-" SCHOOL CODE: - UIPMENT SF ZONE B BUSINESS SF. TOOL SF ZONE B BUSINESS SF. DRESSING SF ZONE B ASSEMBLY- LOCKER SF. ZONE B. UIPMENT SF ZONE C BUSINESS SF. TOOL SF ZONE C BUSINESS SF. DRESSING SF ZONE C ASSEMBLY- LOCKER SF. ZONE C. Grand total. A GENERAL NOTES LIFE SAFETY NOTES IT SHALL BE THE RESPONSIBILTY OF THE GENERAL CONTRACTOR TO HAVE ON SITE A COPY OF ANY AND ALL UL DESIGNS OR REGULATIONS CITED BY, BUT NOT LIMITED TO; ARCHITECT, ENGINEER, MANUFACTURER OR SUBCONTRACTOR. WHERE UL DESIGN AND/OR STANDARD IS REFERENCED, THE SHALL BE PERFORMED IN FULL COMPLIANCE WITH THE REFERENCED DESIGN NUMBER AND/ OR STANDARD; UNLESS ALLOWED DESIGN OMISSIONS ARE NOTED AND/OR DETAILED TO REMAIN, OR ALLOWED DESIGNED OPTIONAL ITEMS ARE NOTED AND OR DETAILED AS MANDATORY RUIREMENTS FOR. WHERE FIRE PRODUCTS (INCLUDING BUT NOT LIMITED TO; SEALANTS, SPRAYS, FOAMS, INTUMESCENTS, OR CAULKING) ARE RUIRED, ALL MATERIALS SHALL BE FROM A SINGLE SOURCE SPECIFIED MANUFACTURER BRAND CORRELATING TO UL DESIGNS, AS DESIGNATED BY THE GENERAL CONTRACTOR PRIOR TO THE START OF. IT SHALL BE THE RESPONSIBILITY OF THE GENERAL CONTRACTOR TO COORDINATE AND ENSURE THAT ALL SUBCONTRACTORS ARE PROVIDING THE PROJECT DESIGNATED SINGLE SOURCE SPECIFIED MANUFACTURER BRAND. THE GENERAL CONTRACTOR IS RUIRED TO COMPLY WITH NFPA CODE. HE IS RESPONIBLE TO MEET ALL TEMPORARY EGRESS RUIREMENTS AS STATED BY THE AUTHORITY HAVING JURISDICTION. THE OWNER AND ARCHITECT SHALL BE NOTIFIED BUSINESS DAYS PRIOR TO ANY CHANGES IN EGRESS. ALL FIRE EXTINGUISHERS REGARDLESS OF TYPE ARE CLASS ABC POUND UNLESS NOTED. ANY RESIDENTIAL STOVE OR COMMERCIAL COOKING UIPMENT SHALL HAVE LEAST ONE CLASS K EXTINGUISHERS LOCATED NO LESS THEN '-" FROM A POINT OF USE. CODES ENFORCED BUT NOT LIMITED TO THE FOLLOWING - IBC, IFC, IMC, IPC, OF THE ICC ED. AND IECC OF THE ICC 9 ED. - WITH GEORGIA DCA AMENDMENTS; NFPA LSC, ED., NATIONAL FIRE CODE ED. W/ -- GEORGIA MIN. FIRE SAFETY STD. BUSINESS ZONE A ZONE A I.B.C.: TYPE V(B) - UNSPRINKLED N.F.P.A. : TYPE V () ZONE A SEE OCCUPANCY SCHEDULE FOR ROOM LOA EXISTING TYPE: ALLOWABLE AREA TRAVEL DISTANCE TO EXIT: ' MAX. DEAD EN: ' MAX SF 99 SF SF 9, SF F.E. TYPE 'A' MEN CONCESSIONS JAN ELECTRICAL UIPMENT UP STAIR WOMEN PRESS BOX DN STAIR LIFE SAFETY PLAN - BASEBALL AND SOFTBALL B PARTITIONS AND NON RATED WALLS EXTEND ALL DECK PARTITIONS (- D -) TO FLOOR/CEILING/ROOF DECK ASSEMBLY CHANGING FROM CMU TO METAL STUD AT " ABOVE CEILING UNLESS NOTED OR DETAILED OTHERWISE. METAL STUD SIZE SHOULD MEET THE MINIMUM SPECIFIED RUIREMENT WITH GYPSUM BOARD ON BOTH SIDES & ACOUSTICAL BATT; TAPED AND SEALED WITH COMPOUND AND ACOUSTICAL SEALANTS TO MEET A LEVEL FINISH. SEAL OPENINGS, PENETRATIONS & INTERSECTIONS TO RESIST SOUND TRANSFERENCE. ALL CONCRETE MASONRY WALLS & METAL STU WITH GYPSUM BOARD PARTITIONS NOT OTHERWISE NOTED OR DETAILED SHALL EXTEND A MINIMUM OF " ABOVE HIGHEST ADJACENT CEILING. C RATED WALLS/BARRIERS UNLESS NOTED OR DETAILED OTHERWISE, EXTEND ALL FIRE RATED WALLS/BARRIERS TO FLOOR/CEILING/ROOF DECK ASSEMBLIES. SEAL BETWEEN WALL/BARRIER AND THE ASSEMBLY WITH MATERIALS SPECIFIED & RUIRED TO MAINTAIN INDICATED RATING. WHERE A HORIZONTAL FIRE RATED ASSEMBLY IS INSTALLED & RATING OF ASSEMBLY UALS OR EXCEE RATING OF WALL/BARRIER, FIRE RATED WALL/BARRIER SHALL TERMINATE AT " ABOVE FIRE RATED ASSEMBLY UNLESS DETAILED OR NOTED OTHER WISE. SEAL ALL PENETRATIONS THROUGH RATED PARTITIONS AND ASSEMBLIES WITH FIRE PRODUCT MATERIAL AND METHO RUIRED TO MAINTAIN RATINGS USING UL DESIGNS AND/OR STANDAR, AS RUIRED BY THE AUTHORITIES HAVING JURISDICTION. & HOUR RATED WALL/BARRIERS SHOWN TO EXTEND TO UPPER FLOOR/ROOF DECKS SHALL CHANGE FROM CMU TO RATED GYPUM BOARD ON METAL STUD AT " ABOVE RATED ASSEMBLIES UNLESS OTHERWISE SHOWN, NOTED OR DETAILED. FIRE RATED MASONRY WALLS SHALL HAVE MASONRY MANUFACTURED IN ACCORDANCE WITH UL #. & HOUR RATED MASONRY WALLS SHALL COMPLY WITH UL #U9 & #U9. HOUR RATED NON-BEARING METAL STUD PARTITIONS SHALL COMPLY WITH UL #U AS PUBLISHED WITH THE EXCEPTION TO THE LAST LINE OF ITEM. JOINT TAPE AND COMPOUND. REGARDLESS OF THE TYPE OF GYPSUM BOARD EDGE SUPPLIED, PAPER TAPE AND JOINT COMPOUND SHALL NOT BE OMITTED. JOINT TREATMENT SHALL MEET MIN. UL RUIREMENT AND MEET A LEVEL FINISH OR GREATER. & HOUR RATED METAL STUD WALLS, BARRIERS, AND/OR PATITIONS SHALL COMPLY WITH UL #U. JOINT TREATMENT SHALL MEET MIN. UL RUIREMENT AND A LEVEL FINISH OR GREATER. D HORIZONTAL ASSEMBLIES LIFE SAFETY - FIRST FLOOR PLAN B. SCALE: /" = '-" LIFE SAFETY SECOND FLOOR PLAN B. SCALE: /" = '-" \\Ds\home\\BB-SB Concessions\B_central-ADDposted_.rvt POST BID ADD NO. (--) POST BID ADD NO. (--) (--) NOVEMBER, FLOOR/CEILING/ROOF CONCRETE DECK ASSEMBLY LOCATED IN TYPE II(B) HAS A MINIMUM -HOUR RATING IN ACCORDANCE WITH IBC SECTION... WHEN NOT PENETRATED. ALL PENETRATIONS IN THE FLOOR/CEILING/ROOF ASSEMBLY SHALL BE SMOKE TIGHT, UNLESS MARKED AS A RATED ASSEMBLY HOUR RATED HORIZONTAL ASSEMBLY SHALL BE CONSTRUCTED AS A ONE HOUR FIRE RATED WALL PLACED HORIZONTALLY IN ACCORDANCE WITH THE RUIREMENTS OF UL# U AS PUBLISHED WITH THE EXCEPTION TO THE LAST LINE OF ITEM. JOINT TAPE AND COMPOUND. REGARDLESS OF THE TYPE OF GYPSUM BOARD EDGE SUPPLIED, PAPER TAPE AND JOINT COMPOUND SHALL NOT BE OMITTED. JOINT TREATMENT SHALL MEET MIN. UL RUIREMENT AND A LEVEL FINISH OR GREATER. SEAL BETWEEN WALL ASSEMBLY WITH MATERIALS SPECIFIED & RUIRED TO MAINTAIN INDICATED RATING // :: AM B. Copyright (c)

8 Fire Resistance Ratings - ANSI/UL BXUVUDesign No. U Nonbearing Wall Rating - HR.. Floor and Ceiling Runners - (not shown) - Channel shaped runners, -/ in. wide (min), -/ in. legs, formed from min No. MSG galv steel, attached to floor and ceiling with fasteners spaced in. OC max.. Steel Studs - Channel shaped, -/ in. wide (min), -/ in. legs, / in. folded back returns, formed from min No. MSG galv steel spaced in. OC max.. Batts and Blankets* - (Optional) - Mineral wool or glass fiber batts partially or completely filling stud cavity. See Batts and Blankets (BZJZ) category for names of Classified companies. A. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) - Spray applied cellulose material. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. Alternate application method: The fiber is applied with U.S. Greenfiber LLC Type AD hot melt adhesive at a nominal ratio of one part adhesive to. parts fiber to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. U S GREENFIBER L L C - Cocoon Stabilized or Cocoon-FRM (Fire Rated Material) B. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) and Item A - Spray applied cellulose insulation material. The fiber is applied with water to interior surfaces in accordance with the application instructions supplied with the product. Applied to completely fill the enclosed cavity. Minimum dry density of. pounds per cubic ft. NU-WOOL CO INC - Cellulose Insulation. Gypsum Board* - / in. thick, ft wide, attached to steel studs and floor and ceiling track with in. long, Type S steel screws spaced in. OC. along edges of board and in. OC in the field of the board. Joints oriented vertically and staggered on opposite sides of the assembly. When attached to item (resilient channels) or A (furring channels), wallboard is screw attached to furring channels with in. long, Type S steel screws spaced in. OC. AMERICAN GYPSUM CO - Types AG-C, AGX- BEIJING NEW BUILDING MATERIALS PUBLIC LTD CO - Type DBX-. CERTAINTEED GYPSUM INC - Types, EGRG, ProRoc Type X, ProRoc Type C. CERTAINTEED GYPSUM CANADA INC - ProRoc Type C, ProRoc Type X or ProRoc Type Abuse-Resistant. CANADIAN GYPSUM COMPANY - Types AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. G-P GYPSUM CORP, SUB OF GEORGIA-PACIFIC CORP - Types, 9, C, DAP, DD, DA, DGG,, GPFS. LAFARGE NORTH AMERICA INC - Types LGFC, LGFCA, LGFC, LGFCA, LGFC-C, LGFC-C/A. NATIONAL GYPSUM CO - Types FSK, FSK-C, FSK-G, FSW-C, FSW-G, FSW, FSW-, FSW-. PABCO BUILDING PRODUCTS L L C, DBA PABCO GYPSUM - Type PG-C or PG-9. PANEL REY S A - Type PRX. SIAM GYPSUM INDUSTRY (SARABURI) CO LTD - Type EX- TEMPLE-INLAND FOREST PRODUCTS CORP - Type X, Veneer Plaster Base - Type X, Water Rated -Type X, Sheathing - Type X, Soffit - Type X, TG-C. UNITED STATES GYPSUM CO - Type AR, C, FRX-G, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. A. Gypsum Board* - (As alternate to Item ) - Nom / in. thick gypsum panels with beveled, square or tapered edges, applied vertically or horizontally. Vertical joints centered over studs and staggered one stud cavity on opposite sides of studs. Horizontal edge joints and horizontal butt joints on opposite sides of studs need not be staggered or backed. Panels attached to steel studs and floor runner with in. long Type S steel screws spaced in. OC when applied horizontally, or in. OC along vertical and bottom edges and in. OC in the field when panels are applied vertically. When used in widths other than in., gypsum panels to be installed horizontally. CANADIAN GYPSUM COMPANY - Types AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. UNITED STATES GYPSUM CO - T ype AR, C, FRX-G, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-X, IP-X, IPC-AR, SCX, SHX, WRC or WRX. B. Gypsum Board* - (As an alternate to Items or A) - Nom / in. thick, ft wide, installed as described in Item A with screw length increased to -/ in. CANADIAN GYPSUM COMPANY - Types AR, IP-AR. UNITED STATES GYPSUM CO - Types AR, IP-AR. USG MEXICO S A DE C V - Types AR, IP-AR.. Joint Tape and Compound - Vinyl, dry or premixed joint compound, applied in two coats to joints and screw heads; paper tape, in. wide, embedded in first layer of compound over all joints. As an alternate, nominal / in. thick gypsum veneer plaster may be applied to the entire surface of Classified veneer baseboard. Joints reinforced. Paper tape and joint compound may be omitted when gypsum boards are supplied with square edges.. Resilient Channel - (Optional-Not Shown) - MSG galv steel resilient channels spaced vertically max in. OC, flange portion attached to each intersecting stud with / in. long type S- panhead steel screws. A. Steel Framing Members (Not Shown)* - As an alternate to Item, furring channels and resilient sound isolation clip as described below: a. Furring Channels - Formed of No. MSG galv steel. -/ in. wide by / in. deep, spaced in. OC perpendicular to studs. Channels secured to studs as described in Item b. Ends of adjoining channels are overlapped in. and tied together with double strand of No. SWG galv steel wire near each end of overlap. As an alternate, ends of adjoining channels may be overlapped in. and secured together with two self-tapping # framing screws, min. / in. long at the midpoint of the overlap, with one screw on each flange of the channel. b. Steel Framing Members* - Used to attach furring channels (Item a) to studs (Item ). Clips spaced in. OC., and secured to studs with -/ in. wafer or hex head Type S steel screw through the center grommet. Furring channels are friction fitted into clips. PAC INTERNATIONAL INC - Type RSIC-.. Wall and Partition Facings and Accessories* - (Optional, Not shown) - Nominal / in. thick, ft wide panels, for optional use as an additional layer on one or both sides of the assembly. Panels attached in accordance with manufacturer's recommendations. When the QR- panel is installed between the steel framing and the UL Classified gypsum board, the required UL Classified gypsum board layer(s) is/are to be installed as indicated as to fastener type and spacing, except that the required fastener length shall be increased by a minimum of / in. Not evaluated or intended as a substitute for the required layer(s) of UL Classified Gypsum Board. QUIET SOLUTION INC - Type QuietRock QR-. *Bearing the UL Classification Mark UL NO. U B. /" Fire Resistance Ratings - ANSI/UL BXUVU9Design No. U9 Bearing Wall Rating - HR. Nonbearing Wall Rating - HR Load Restricted for Canadian Applications - See Guide BXUV Horizontal Section. Concrete Blocks* - Various designs. Classification D- ( hr). See Concrete Blocks category for list of eligible manufacturers.. Mortar - Blocks laid in full bed of mortar, nom. / in. thick, of not less than -/ and not more than -/ parts of clean sharp sand to part Portland cement (proportioned by volume) and not more than percent hydrated lime (by cement volume). Vertical joints staggered.. Portland Cement Stucco or Gypsum Plaster - Add / hr to classification if used. Where combustible members are framed in wall, plaster or stucco must be applied on the face opposite framing to achieve a max. Classification of -/ hr. Attached to concrete blocks (Item ).. Loose Masonry Fill - If all core spaces are filled with loose dry expanded slag, expanded clay or shale (Rotary Kiln Process), water repellant vermiculite masonry fill insulation, or silicone treated perlite loose fill insulation add hr to classification.. Foamed Plastic* - (Optional-Not Shown) - -/ in. thick max, ft wide sheathing attached to concrete blocks (Item ). THE DOW CHEMICAL CO - Type Thermax *Bearing the UL Classification Mark /" SCALE: " = '-" UL NO. U9 B. SCALE: " = '-" Fire Resistance Ratings - ANSI/UL BXUVU9Design No. U9 Bearing Wall Rating - HR. Nonbearing Wall Rating - HR. Load Restricted for Canadian Applications - See Guide BXUV Horizontal Section. Concrete Blocks* - Nominal by by in, hollow or solid. Classification D- ( hr). ANCHOR CONCRETE PRODUCTS INC GAGNE & SON CONCRETE BLOCK INC Allowable compressive stress of % of max allowable compressive stress in accordance with the empirical design method. OLDCASTLE APG NE DBA ARTHUR WHITCOMB WESTBROOK CONCRETE BLOCK CO INC Allowable compressive stress of.% of max allowable compressive stress in accordance with the empirical design method.. Mortar - Blocks laid in full bed of mortar, nom. / in. thick, of not less than -/ and not more than -/ parts of clean sharp sand to part Portland cement (proportioned by volume) and not more than percent hydrated lime (by cement volume). Vertical joints staggered.. Portland Cement Stucco or Gypsum Plaster - Add / hr to Classification if used. Attached to concrete blocks (Item ).. Foamed Plastic* - (Optional-Not Shown) - -/ in. thick max, ft wide sheathing attached to concrete blocks (Item ). THE DOW CHEMICAL CO - Type Thermax *Bearing the UL Classification Mark UL NO. U9 B. SCALE: " = '-" HORIZ. TRUSS " O.C. VERT. " C.M.U. TYPE "A" CABINET FIRE EXTINGUISHER HORIZ. TRUSS " O.C. VERT. " NOM. C.M.U. USE ONLY WHERE WALL IS NOT FIRE RATED FIRE EXTINGUISHER TYPE 'A' B. SCALE: /" = '-" NOTE: THIS DETAIL IS FOR EVERY TYPE 'A' IN A FIRE RATED WALL Fire Resistance Ratings - ANSI/UL BXUVU Design No. U (For Exterior Walls, Ratings Applicable) For Exposure To Fire On Interior Face Only, (See Items and ) Bearing Wall Rating - Min,, -/ or HR. (See Items and ) Load Restricted for Canadian Applications - See Guide BXUV INTERIOR WALL HORIZONTAL SECTION a b c or e HORIZONTAL SECTION. Steel Floor and Ceiling Tracks - (Not Shown) - Top and bottom tracks of wall assemblies shall consist of steel members, min No. MSG (.9 in., min bare metal thickness) steel or min No. GSG (. in. thick) galv steel or No. MSG (. in. thick) primed steel, that provide a sound structural connection between steel studs, and to adjacent assemblies such as a floor, ceiling, and/or other walls. Attached to floor and ceiling assemblies with steel fasteners spaced not greater than in. O.C.. Steel Studs - Corrosion protected steel studs, min No. MSG (.9 in., min bare metal thickness) steel or min - / in. wide, min No. GSG (. in. thick) galv steel or No. MSG (. in. thick) primed steel, cold formed, shall be designed in accordance with the current edition of the Specification for the Design of Cold-Formed Steel Structural Members by the American Iron and Steel Institute. All design details enhancing the structural integrity of the wall assembly, including the axial design load of the studs, shall be as specified by the steel stud designer and/or producer, and shall meet the requirements of all applicable local code agencies. The max stud spacing of wall assemblies shall not exceed in. OC (or in. OC when Item C is used). Studs attached to floor and ceiling tracks with / in. long Type S- steel screws on both sides of studs or by welded or bolted connections designed in accordance with the AISI specifications.. Lateral Support Members - (Not shown) - Where required for lateral support of studs, support may be provided by means of steel straps, channels or other similar means as specified in the design of a particular steel stud wall system.. Gypsum Board* - Gypsum wallboard bearing the ULI Classification Marking as to Fire Resistance. Applied vertically with joints between layers staggered. Outer layer of layer construction may be applied horizontally. The thickness and number of layers and percent of design load for the min, hr, -/ hr and hr ratings are as follows: Interior Walls EXTERIOR WALL Wallboard Protection Both Sides of Wall - No. of Layers & Thkns % of Rating of Board In. Each Layers Design Load min * layer, / in. thick hr * layer, / in. thick -/ hr * layers, / in. thick hr * layers, / in. thick or * layers, / in. thick * layers, / in. thick INTERIOR (FIRE) SIDE *Ratings applicable to assemblies serving as exterior walls where Classified fire resistive gypsum sheathing type wallboard is substituted on the exterior face. Exterior Walls Wallboard Protection Both Sides of Wall - No. of Layers & Thkns % of Rating of Board In. Each Layers Design Load min layer, / in. thick hr layers, / in. thick -/ hr layers, / in. thick hr layers, / in. thick layers, / in. thick See Gypsum Board (CKNX) Category - for names of Classified Companies of / in. or / in. thick wallboard. See below for Classified Companies of / in. thick wallboard. CANADIAN GYPSUM COMPANY Types AR, IP-AR, IP-X, or ULTRACODE UNITED STATES GYPSUM CO Types AR, IP-AR, IP-X, or ULTRACODE USG MEXICO S A DE C V Types AR, IP-AR, IP-X, or ULTRACODE A. Gypsum Board - As an alternate to Item Nom. / in. thick gypsum panels, with square edges, applied horizontally. Gypsum panels fastened to framing with in. long bugle head steel screws spaced a max in. OC, with last screws / in. and in. from each edge of board. Horizontal joints need not be backed by steel framing. Horizontal edge joints and horizontal butt joints on opposite sides of studs on interior walls need not be staggered. Horizontal edge joints and horizontal butt joints in adjacent layers on interior walls (multilayer systems) staggered a min of in. TEMPLE-INLAND FOREST PRODUCTS CORP GreenGlas. Gypsum Sheathing - For exterior walls, / or / in. thick exterior regular gypsum sheathing applied vertically and attached to studs and runner tracks with in. long Type S- bugle head screws spaced in. OC. along studs and tracks. One of the following exterior facings are to be applied over the gypsum sheathing. A. Siding, Brick, or Stucco - Aluminum siding, steel siding, brick veneer, or stucco attached to studs over gypsum sheathing and meeting the requirements of local code agencies. When a min -/ in. thick brick veneer facing is used, the Exterior Wall Rating is applicable with exposure on either face. Brick veneer wall attached to studs with corrugated metal wall ties attached to each stud with steel screws, not more than each sixth course of brick. When a min -/ in. thick brick veneer facing is used, Foamed Plastic (Item ) may be used. B. Mineral and Fiber Boards* - Exterior hard board paneling, chemically treated over gypsum sheathing with primed or finished face, / in. thick by in. wide. Attached to studs over gypsum sheathing with -/ in. long bugle-head TEK fasteners in. OC at the intermediate supports Or, exterior lap siding, chemically treated, / in. thick by in. or in. wide. Attached to studs with -/ in. long, bugle-head Type TEK fasteners at each lap. Panels lapped minimum in. MASONITE CORP Type FT. C. Cementitious Backer Units* - / or / in. thick, square edge boards, attached to steel studs over gypsum sheathing with -/ in. long, Type S-, corrosion resistant, wafer head steel screws, spaced in. OC. Studs spaced a max of in. OC. Joints covered with glass fiber mesh tape. UNITED STATES GYPSUM CO Durock Exterior Cement Board or Durock Brand Cement Board. D. Fiber-Cement Siding - Fiber-cement exterior sidings including smooth and patterned panel or lap siding. E. Molded Plastic* - Solid vinyl siding mechanically secured to framing members in accordance with manufacturer's recommended installation details. ALSIDE, DIV OF ASSOCIATED MATERIALS INC HEARTLAND BUILDING PRODUCTS INC NEBRASKA PLASTICS INC. Fasteners - (Not Shown) - Screws used to attach wallboard to studs: self-tapping bugle head sheet steel type, spaced in. O.C. First layer Type S- by in. long for / and / in. thick wallboards and -/ in. long for / in. thick wallboard. Second layer Type S- by -/ in. long for / and / in. thick wallboards and -/ in. long for / in. thick wallboard. Third layer Type S- by -/ in. long.. Batts and Blankets* Placed in stud cavities of all exterior walls. May or may not be used in interior walls. Any glass fiber or mineral wool batt material bearing the UL Classification Marking as to Fire Resistance, of a thickness to completely fill stud cavity. See Batts and Blankets (BZJZ) Category for names of Classified Companies. A. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item ) - Spray applied cellulose material. The fiber is applied with water to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. Alternate application method: The fiber is applied with U.S. Greenfiber LLC Type AD hot melt adhesive at a nominal ratio of one part adhesive to. parts fiber to completely fill the enclosed cavity in accordance with the application instructions supplied with the product. Nominal dry density of. lb/ft. U S GREENFIBER LLC Cocoon Stabilized or Cocoon-FRM (Fire Rated Material). Joint Tape and Compound - (Not Shown) - Vinyl or casein, dry or premixed joint compound applied in two coats to joints and screw heads of outer layer. Perforated paper tape, in. wide, embedded in first layer of compound over all joints of outer layer. 9. Furring Channels - (Optional, not shown, for single or double layer systems) - Resilient furring channels fabricated from min MSG corrosion-protected steel, spaced vertically a max of in. OC. Flange portion attached to each intersecting stud with / in. long Type S- steel screws.. Foamed Plastic* - (Not Shown) - For use with brick veneer as outlined in Item A - Maximum in. thick rigid polystyrene insulation attached to studs with fasteners of sufficient length to penetrate the foam and / in. into the stud. A minimum in. air space is to be maintained between the outer surface of the foamed plastic and the inner surface of the brick veneer. OWENS CORNING SPECIALTY & FOAM PRODUCTS A. Mortar Drop Protection - (Optional, Not shown) - foamed plastic with mortar control device attached, continuous, by drainage holes at bottom of air space behind brick veneer. OWENS CORNING SPECIALTY & FOAM PRODUCTS WeepGuard. Cementitious Backer Units* - (Optional Item Not Shown -For Use On Face Of Hr Or Hr Systems With All Standard Items Required) - / in., / in., / in. or in. thick, min. in. wide.- Applied vertically or horizontally with vertical joints centered over studs. Fastened to studs and runners with cement board screws of adequate length to penetrate stud by a minimum of / in. for steel framing members, and a minimum of / in. for wood framing members spaced a max of in. OC. When ft. wide boards are used, horizontal joints need not be backed by framing. -Hr System - Applied vertically with vertical joints centered over studs. Face layer fastened over gypsum board to studs and runners with cement board screws of adequate length to penetrate stud by a minimum of / in. for steel framing members, and a minimum of / in. for wood framing members spaced a max of in. OC. NATIONAL GYPSUM CO Type PermaBase *Bearing the UL Classification Mark UL NO. U B. SCALE: " = '-" /" GYPSUM BOARD METAL " O.C., REFER TO PLANS FOR SIZE TYPE "A" CABINET FIRE EXTINGUISHER /" TYPE 'X' RATED GYP. BD. W/ HR. FIRE RATED BARRIERS & HR. FIRE RATED BARRIERS " METAL " O.C. USE ONLY WHERE WALL IS NOT FIRE RATED FIRE EXTINGUISHER TYPE 'A' B. SCALE: /" = '-" " /" " ' - " MAX. " UNSUPPORTED LENGTH " MAX. " " MAX. " /" NOM. " /" WALLS PERPEDICULAR TO DECK FLUTES /" WALLS PERPEDICULAR TO DECK FLUTES TAPE AND JOINT COMPOUND (TYP.) HOUR RATED WALL /" FIRE-SHIELD GYPSUM WALLBOARD HOUR RATED WALL HIGHER PRIORITY WALL METAL STU /" MINERAL WOOL SAFING CEILING FINISHED FLOOR RATED WALL ROOF DECK / FLOOR SLAB TRACK - ATTACH WITH ANCHORS '-" O.C. MAX. TAPE AND JOINT COMPOUND (TYP.) NON-RATED WALL 9 RATED WALL INTERSECTIONS B. SCALE: " = '-" UL RATED SEALANT EACH SIDE TRACK - ATTACH WITH ANCHORS '-" O.C. MAX METAL STU " O.C. /" TYPE "X" RATED GYPSUM BOARD LAYERS EACH SIDE FLEXIBLE FIRE RATED SEALANT HEAD OF WALL UL U B. B. SCALE: " = '-" MINERAL WOOL SAFING UL RATED INTUMESCENT SEALANT EACH SIDE ROOF DECK / FLOOR SLAB TRACK - ATTACH WITH ANCHORS '-" O.C. MAX CEILING METAL STU " O.C. /" TYPE "X" RATED GYPSUM BOARD LAYERS EACH SIDE TRACK - ATTACH WITH ANCHORS '-" O.C. MAX. FLEXIBLE FIRE RATED SEALANT FINISHED FLOOR HEAD OF WALL UL U B. SCALE: " = '-" ROOF DECK/ FLOOR UL RATED INTUMESCENT SEALANT EACH SIDE STEEL BEAM " X " GA. GALV. ANGLE RETAINER FASTEN TO DECK '-" O.C. MAX. MINERAL WOOL /" TYPE "X" RATED GYPSUM BOARD OR LAYERS EA. SIDE AS RUIRED METAL STU TRACK METAL STU /" TYPE "X" RATED GYPSUM BOARD OR LAYERS EA. SIDE AS RUIRED RATED WALL ADJ. TO BEAM SCALE: " = '-" DECK UL RATED SEALANT SYSTEM, BOTH SIDES SOLID C.M.U. STEEL JOIST OR BEAM ABOVE WALL DECK UL RATED SEALANT APPLIED AS RUIRED BY UL JOINT ASSEMBLY UL MARKED MINERAL WOOL INSULATION CUT AND PACKED AS RUIRED BY UL JOINT ASSEMBLY SOLID C.M.U. /" TYPE X RATED GYP. BD. W/ HR. FIRE RATED BARRIERS & HR. FIRE RATED BARRIERS GA. OR HEAVIER MT. STUD FRAMING UL RATED PERIMETER OF GYP. BD. UL RATED NOM. C.M.U. DECK UL RATED SEALANT SYSTEM, BOTH SIDES STEEL JOIST OR BEAM ABOVE WALL ACOUSTIC NONRATED WALLS TO DECK DECK /" TYPE X RATED GYP. BD. W/ HR. FIRE RATED BARRIERS & HR. FIRE RATED BARRIERS GA. OR HEAVIER MT. STUD FRAMING UL RATED PERIMETER OF GYP. BD. SOLID C.M.U. UL RATED NOM. C.M.U. UL RATED SEALANT APPLIED AS RUIRED BY UL JOINT ASSEMBLY UL RATED NOM. C.M.U. INTERNATIONAL BUILDING CODE TABLE FIRE-RESISTANCE RUIREMENTS FOR BUILDING ELEMENTS (hours) BUILDING ELEMENT TYPE I TYPE II TYPE III TYPE IV TYPE V A B A e B A e B HT A e B Structural frame a b b HT Bearing walls Exterior g Interior HEAD OF ROOF DECK B. SCALE: /" = '-" Non bearing walls and partitions Exterior Nonbearing walls and partitions Interior f Floor construction Including supporting beams & joists Roof construction Including supporting beams & joists For SI: foot =. mm. HEAD OF PARALLEL STR. B. SCALE: /" = '-" b b See IBC Table /HT See Section.. HT / c c, d c, d c, d c, d c, d HT c, d a. The structural frame shall be considered to be the colums and the girders, beams, trusses and spandrels having direct connections to the colums and bracing members designed to carry gravity loads. The members of floor or roof panels which have no connection to the columns shall be considered secondary members and not a part of the structural frame. b. Roof supports: Fire resistance ratings of structural frame and bearing walls are permitted to be reduced by hour where supporting a roof only. c. Except in group F-, H, M and S- occupancies, fire protection of structutal members shall not be required, including protection of roof framing and decking where every part of the roof construction is feet or more above any floor immediately below. Fire-retardant-treated wood members shall be allowed to be used for such unprotected members. d. In all occupancies, heavy timber shall be allowed where a -hour or less fire-resistance rating is required. e. An approved automatic sprinkler system in accordance with section 9... shall be allowed to be substituted for -hour fire-resistance-rated construction, provided such system is not otherwise required by other provisions of the code or used for an allowable area increase in accordance with Section. or an allowable height increase in accordance with Section.. The - hour subtittution fot the fire-resistance of exterior walls shall not be permitted. f. Not less than the fire-resistance rating required by other sections of this code. g. Not less than the fire-resistance rating based on fire separation distance (see Table ). IBC TABLE B. " MIN. OVERLAP SCALE: " = '-" DECK UL SEALANT APPLIED AS RUIRED BY UL JOINT ASSEMBLY /" TYPE X RATED GYP. BD. W/ HR. FIRE RATED BARRIERS & HR. FIRE RATED BARRIERS UL RATED SEALANT AT PERIMETER OF GYP. BD. STEEL JOIST OR BEAM SOLID C.M.U. UL RATED NOM. C.M.U. DECK UL SEALANT APPLIED AS RUIRED BY UL JOINT ASSEMBLY UL MARKED MINERAL WOOL INSULATION CUT AND PACKED AS RUIRED BY UL JOINT ASSEMBLY STEEL JOIST OR BEAM SOLID C.M.U. UL RATED NOM. C.M.U. ROOF DECK B. SCALE: /" = '-" \\Ds\home\\BB-SB Concessions\B_central-ADDposted_.rvt SCHOOL CODE: - LIFE SAFETY DETAILS - BASEBALL AND SOFTBALL POST BID ADD NO. (--) POST BID ADD NO. (--) (--) NOVEMBER, B. B.N. GROUT SOLID AROUND F.E. CABINET TYPE "A" CABINET FIRE EXTINGUISHER F. E. TYPE 'A' (RATED WALL) SCALE: /" = '-" B.N. " NOM. C.M.U. B. TYPE "A" CABINET FIRE EXTINGUISHER F. E. TYPE 'A' (RATED WALL) SCALE: /" = '-" // :: AM B. Copyright (c)