STANDARDIZED STRUCTURES

Size: px

Start display at page:

Download "STANDARDIZED STRUCTURES"

Nora Howard
5 years ago
Views:

Q, QH & QL TOWERS 16.1 Q, QH, and QL Towers General Description The series includes three and four leg angle towers, which are suited for a variety of antenna mounting positions and load conditions.

1 Q, QH & QL TOWERS 16.1 Q, QH, and QL Towers General Description The series includes three and four leg angle towers, which are suited for a variety of antenna mounting positions and load conditions. The structures' versatile design allows easy customization for accommodating unique antenna mounting requirements. The design also allows for a variety of transmission line application configurations. The structures can be supported by either pier footing or slab foundation. Step bolts are provided with the towers, and external walkways and climbing ladders may be ordered additionally. Q Tower Q Towers are four leg models with a single antenna mounting bay at the top of the tower. The maximum antenna load that can be applied at the centerline of the mounting bay of the Q15, Q20, Q25 and Q30 towers is 6,500 lbs with 200 inch-kips of torque. Allowable antenna load for the Q35 and Q40 towers is 5,000 lbs with 250 inch-kips of torque. 4' mounting bay 7' Gage lines Q15 Anchor Bolts $ Q20 Anchor Bolts $ Q25 Anchor Bolts $ Q30 Anchor Bolts $ Q35 Anchor Bolts $ Q40 Anchor Bolts $ ' Q Tower Shown Reactions - Maximum Per Leg Number Model Height Uplift lbs. Download lbs. Shear lbs. Price Q15 15' 9,070 10,670 2,100 $1, Q20 20' 13,360 15,150 2,230 $1, Q25 25' 18,050 20,050 2,360 $2, Q30 30' 22,870 25,090 2,510 $2, Q35 35' 22,600 26,200 2,280 $3, Q40 40' 27,250 31,050 2,430 $3,265.00

16.2 Q, QH AND QL TOWERS QH Tower QH Towers are four-leg models with two antenna mounting bays. This variation of the standard Q tower provides greater flexibility for the mounting of antennas.

QL Tower QL Towers are three-leg models available in 15' and 20' models with a single antenna mounting bay at the top of tower.

2 16.2 Q, QH AND QL TOWERS QH Tower QH Towers are four-leg models with two antenna mounting bays. This variation of the standard Q tower provides greater flexibility for the mounting of antennas. The maximum antenna load that can be applied at the centerline of each mounting bay is 5,500 lbs with 0 inch-kips of torque, or 4,500 lbs with 55 inch-kips of torque. QL Tower QL Towers are three-leg models available in 15' and 20' models with a single antenna mounting bay at the top of tower. The maximum antenna load that can be applied at the centerline of the mounting bay is 4,500lbs with 215 inchkips of torque. 7' Gage lines 7' Gage lines 4' mounting bay 4' mounting bay QH25 Anchor Bolts $ QH30 Anchor Bolts $ QL15 Anchor Bolts $ Reactions - Maximum Per Leg Uplift Download Shear Number Model Height lbs. lbs. lbs. Price QH25 25' 22,730 26,150 3,360 $2, QH30 30' 30,080 33,790 3,770 $3, Reactions based on 100 mph, 40 psf wind load with 1 /2" radial ice Reactions - Maximum Per Leg Uplift Download Shear Number Model Height lbs. lbs. lbs. Price QL15 15' 10,990 12,680 3,100 $1, QL20 20' 16,210 18,130 3,340 $1,5.00 Reactions based on 100 mph, 40 psf wind load with 1 /2" radial ice

Q, QH & QL TOWERS 16.3 Single Pipe Mounts for Q and QH Towers Pipe Mounts can be installed on any corner or at the center of any side, at the mounting bays. All mounting hardware is included.

00 92092 2 3 /8" x 5' $110.00 92093 2 7 /8" x 5' $125.00 92049 4 1 /2" x 5' $98.00 92051 4 1 /2" x 8'-4" $200.00 920 4 1 /2" x 5' $140.00 92047 4 1 /2"" x 8'-4" $200.

3 Q, QH & QL TOWERS 16.3 Single Pipe Mounts for Q and QH Towers Pipe Mounts can be installed on any corner or at the center of any side, at the mounting bays. All mounting hardware is included. Single Pipe Mounts for QL Towers Pipe Mounts can be installed on any corner, or at the center of any side, at the mounting bays. All mounting hardware is included /8" x 3' $ /8" x 5' $ /8" x 5' $ /2" x 5' $ /2" x 8'-4" $ /2" x 5' $ /2"" x 8'-4" $ Overhang Pipe Mounts for Q and QH Towers In the application of the overhang mount, both antennas must be installed at the initial installation and loading is not to exceed the loading specified in this catalog for the individual tower. Mounting hardware is included. Pipe mounts are ordered separately. Lightning Rod for Q, QH and QL Towers Lightning rods are available as options for the Q, QH and QL towers. They are 5 /8" diameter x 4' long, galvanized steel. Mounting plate and mounting hardware are included shown Overhang Pipe Mount Kit $ for Q and QH $ for QL $40.00

16.4 Q, QH AND QL TOWERS Climbing Ladder for Q Towers The climbing ladder is attached on the outer side of any tower leg using the existing bracket holes in the tower leg and the clamps provided with

Walkways & Platform for Q Towers Exterior perimeter walkways and platform are available for the Q and QH towers.

4 16.4 Q, QH AND QL TOWERS Climbing Ladder for Q Towers The climbing ladder is attached on the outer side of any tower leg using the existing bracket holes in the tower leg and the clamps provided with the ladder. Ladders are available for all Q, QH and QL towers. Hardware and mounting brackets are included. Walkways & Platform for Q Towers Exterior perimeter walkways and platform are available for the Q and QH towers. The walkway is 1'-6 3 /4" wide and encompasses the tower with an opening for the exteriorclimbing ladder to pass through. Two support brackets and hardware are included with each walkway. Use three "N" sections for QL Towers. 1'4" typical 1' spacing typical M O N N For Number Tower Height Price ' $ ' $ ' $ ' $ ' $ ' $ ' $ ' $ ' $ ' $ Number Walkway Price "N" Walkway $ "M" Walkway $ "O" Walkway $ Inside Platform for Q & QH tower 1 $1, Attaches at bottom of antenna mounting bay.

5 Q, QH & QL TOWERS 16.5 Q, QH and QL Slab Foundations General Notes 1. Concrete shall have a minimum compressive strength of 3,000 psi at 28 days. 2. Use ASTM A615 Grade60 deformed reinforcing bars with minimum yield strength of 60,000 psi. 4' 1/2" Auger footings are designed to have minimum safety factors per latest revision of EIA/TIA Standards. 6' 3/4" 4. Reinforcing bar to be supplied by the foundation contractor. 5. Rock anchor footing should only be used where the rock formation is sound enough for drilling and grouting. Outcroppings with large fractures and pieces of rock that are easily separated from the formation will not allow proper placement of the footing bars. Excavation must be made to a solid rock strata. 7' 3' 6" 6. The height of piers above grade can be varied for the best choice of anchor bolt embedment in the rock and height of pier. Also, the heights of piers above grade often are determined by leveling requirements and other reference elevations. 7. The vertical reinforcing bars should be within three inches of pier top. Where the grouted bar is too short to extend the pier height, a proper rebar splice should be made by welding or overlapping. W M C L V Z 9' 9-3/8" 3' 5-1/2" D As required for anchor bolt Rebar 3" clear (typ.) 12 ea. #6 rebar equally spaced each way, top and bottom (48 bars, 12' 6" long required). 3' 5-1/2" Design wind loads are 40 psf with 1 /2" radial ice. Tower M V W D Z Vol Conc. Max Toe Press Model kip-ft lbs lbs Ft-in in yds 3 psf ,400 3,220 2' 3" ,920 3,580 2' 3" ,440 3,980 2' 3 1 /2" , ,000 4,0 2'-3" 3 1 /2" , ,120 7,000 2'-3" 3 3 /4" , ,690 7,400 2'-9" 3 3 /4" , ,500 6,840 2'-3" 3 1 /2" , ,100 7,410 3' 3 3 /4" , ,200 2,540 2' 3" ,670 2,880 2' 3"

6 16.6 Q, QH AND QL TOWERS Foundation Layout for Q and QH Towers Anchor Bolt Data Foundation Layout For QL Towers Pier Dimensions 4' 1/2" 60 9' 9-3/8" 6' 3/4" Tower Size Model Dia. x Length Z Q15 1" x 4' 3" Q20 1" x 4' 3" Q /4" x 5' 3 1 /2" Q /4" x 5' 3 1 /2" Q /4" x 5' 3 3 /4" Q /2" x 5' 3 3 /4" QH /4" x 5' 3 1 /2" QH /2" x 5' 3 3 /4" QL15 1" x 4' 3" QL20 1" x 4' 3" Concrete Req d- D B S Vert. #4 Cu.Yds. Diameter Diameter Bars Bar Ties Total 4'-9" 4' 3' 4 No '-9" 4' 3' 4 No '-9" 4' 3' 4 No ' 4'-6" 3'-6" 4 No '-6" 5' 4' 4 No '-3" 5' 4' 4 No ' 4'-6" 3'-6" 4 No '-9" 5' 4' 4 No '-3" 4' 3' 4 No '-3" 4' 3' 4 No ' Typical Footing for Normal Soil Anchor Bolt Projection Detail Typical Rock Footing Vertical bars #4 ties Vertical bars Z Top of pier #4 ties Section A-A 6" Section B-B Grade Vertical bars #4 bars equally spaced A 2' 6" A 1 5 Form portion above ground only S 6" D Hook top of rebar hook to be 12" long for #8 rebar Height of pier above grade varies in accordance with earth cover over solid rock level and depth of anchor bolts below solid rock Top soil, other soil, and fractured rock vary in depth above solid rock This dimension minimum of 2 or maximum of 4' when solid rock is nearly at site grade level 6" minimum embedment in solid rock to resist shear load from structure Chip hole in rock for anchor bolts if necessary for adjustment of desired pier elevation 3' 6" B 3' B Form portion above grade only #8 Vertical rebar 12" maximum spacing of ties Solid rock level Paint with grout before pouring concrete Fill with grout 2" dia. hole maximum with slope of 2:12 B 2' 6"

Foundation Specifications

Installation Instructions Bulletin 7581438 Revision C Foundation Specifications for 6.5-Meter Modular Earth Station Antennas Introduction This document specifies typical foundation characteristics, designs,