IIRSM Qatar. 20 th March Presented by: Mark Stephens
|
|
|
- Shanon Walton
- 5 years ago
- Views:
Transcription
1 IIRSM Qatar 20 th March 2018 Presented by: Mark Stephens
2 Welcome & Announcements
3 Welcome & Announcements Welcome to: - All of our members and visitors, especially those attending for the first time; Representatives of our sponsor DISS; Our guest participants: Vishnu Gopal & Vitor Rosa
4 Agenda Legal Focus Qatar Legislation Presentation Fascinating Nature Supplier Presentation - DokaScaffUni Networking: Introductions Networking Topic Presentation Working at Height Statistics Local Accident & Lessons Learned Other Business
5 Legal Focus Agenda #1
6 Legal Focus Resolution of the Ministry of Civil Service & Housing Affairs No. 20 of 2005 Article 17 Stable ladders should be made of substances to prevent slips. They should also be provided with precautions of safety affixed to the sides. Moveable ladders should be strong and be able to support weight
7 Legal Focus Resolution of the Ministry of Civil Service & Housing Affairs No. 20 of 2005 Article 17 The height of the rungs should be regular with suitable dimensions. Bases and heads should be provided with fixed means to prevent slipping. It is preferable to use double ladders
8 Legal Focus Resolution of the Ministry of Civil Service & Housing Affairs No. 20 of 2005 Article 17 Scaffolds should be made of strong and suitable substances to bear the weight of the load They should also be wide enough and surrounded by obstacles to prevent the falling of workers and materials Workers should be provided with safety devices during erection
9 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Scaffolds should only be erected, altered, or dismantled by, or under the supervision of, a competent person
10 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article The design of temporary works, such as falsework, formwork and scaffolding, falls within the scope of CDM
11 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Designated danger areas must be created where there is a risk of a person falling, or being hit by a falling object. In the case of incomplete scaffolding, suitable notices must be displayed to discourage attempted access onto the scaffold
12 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Work at Height BS EN :2003
13 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Work at Height BS EN 13374
14 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Work at Height TG 20:08
15 Legal Focus QCS 2014 Section 11 (Regulatory Document) Article Work at Height NASC SG4:05
16 Agenda #2 Fascinating Nature by Vishnu Gopal
17 Agenda 3 Supplier Presentation DOKA
18 Networking Agenda 4
19 Agenda 5 Presentation HSE Working at Height Statistics
20 Agenda 6 Local Accident & Lessons Learned
21
22 ROOT CAUSES IDENTIFIED Improper positioning Complacency Slippery floors Improper equipment Inability to sustain body position Critical behaviors not reinforced Work planning Non-correction of unsafe cats/behaviors Procedure for work performed Assessment of hazard and risk
23 UK HSE Executive Ladders are a sensible and practical option for low-risk, short-duration tasks
24
25 Other Business Agenda 8
26 (now is the time to raise questions from work)
27 Other Business
28 Other Business
29 Other Business Oyebande Waheed Takou Evariste Mehboob Reza Ajibade Lateef
30 Upcoming Events and Meetings March 20 IIRSM Meeting Crowne Plaza Hotel International Conference on Environment Mercure Grand Hotel
31 Upcoming Events and Meetings April 17 IIRSM Meeting (tbc) 28 UN World Day for Safety & Health at Work
32 Upcoming Events and Meetings th MAY Qatar HSE & Fire Safety Conference - Marriott Marquis City Centre Hotel 05 June UN World Environment Day
33 A Word of Thanks To our sponsor DISS for support of the branch for the first quarter of this year. Thanks to Vishnu and Vitor for their participation To all of you, our members and visitors, for making the effort to attend and support IIRSM.
34 A Word of Thanks
ADVANCED SCAFFOLDING COURSE { STI, USA APPROVED }
ADVANCED SCAFFOLDING COURSE { STI, USA APPROVED } [An international course with a duration of 2 days, which provides the in depth knowledge on scaffolding, method of erection, inspection] JD INSTITUTE
Training Standard Draft Only
Title Duration Purpose/ Scope Occupational Relevance Health and Safety in Construction (Site Manager) Minimum 5 days of 6 learning hours per day Purpose: The purpose of training delivered against this
The Construction (Design and Management) Regulations 2015 sets out the duties of Designers and Contractors.
TEMPORARY WORKS AND DESIGN PROCEDURE. Legislation The Working at Height Regulations 2005, require Strength and Stability calculations for any arrangement of scaffolding that is not covered by a recognised
Cantilever Loading Platform Erection Procedures and Guidance Notes
Cantilever Loading Platform Erection Procedures and Guidance Notes Please note this is a six page document. 1 Introduction 1 Issue Date: January 2007 It is essential that the procedures are read and fully
Health and and Safety Executive. Temporary Works. Phil Chester HM Inspector of Health and Safety
Health and and Safety Executive Temporary Works Phil Chester HM Inspector of Health and Safety Legal obligations CDM Regulations 2015 Reg 4(4) client s duty to provide pre-construction information, e.g.
The safe management and control of Temporary Works
The safe management and control of Temporary Works What are TW s? The HSE describe Temporary Works (TW s) as; an engineered solution that may include any structure, provision for access, item or technique
Scaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
All employees who are exposed or who are likely to be exposed to a hazardous material.
POLICY NO.: 12.7.1 EFFECTIVE DATE: January 26, 2004 PAGE: 1 OF 6 POLICY STATEMENT: In the past, information about hazardous materials was often incomplete, inconsistent or not available. This meant that
2014 CATALOGUE
2014 CATALOGUE www.safetyplatforms.co.uk S.T.A. SYSTEM - SAFE TRUSS ACCESS PROBLEM SOLVED! One of the major problems facing the housebuilding industry is how to safely fix bracing timbers to roof trusses.
EASY STAIR - EASY - SAFE
EASY STAIR - EASY - SAFE EASIER: Easy Stair makes site access much EASIER by providing stair access prior to the installation of permanent stairs. Why struggle up and down ladders when a simple staircase
Construction, Demolition & Excavation Works Doc Reference: DoMN-WHSMS 3.14 Version Number: 2.2
Purpose This procedure provides guidance to the Diocese of Maitland Newcastle (DoMN), principal contractors and other persons conducting a business or undertaking (PCBU) who commission or carry out construction,
SCAFFOLDING COURSES SKILLS TRAINING THAT WORKS
ASET Scaffolding Training Centre SCAFFOLDING COURSES SKILLS TRAINING THAT WORKS FOR THE CONSTRUCTION INDUSTRY Contents 2 LOCATION MAP 3 COURSE BOOKINGS and information 5 Construction Industry Scaffolders
Supported Scaffold Inspections
Supported Scaffold Inspections May 2016 Inspect scaffolds and scaffold parts daily, before each work shift, and after any event that may have caused damage. Check to see if power lines near scaffolds are
Commercial Industrial Residential. Temporary Roofs Access New Build Planned Maintenance Restoration Projects. The Scaffolding Professionals
Commercial Industrial Residential Temporary Roofs Access New Build Planned Maintenance Restoration Projects The Scaffolding Professionals The Scaffolding Professionals V&S Scaffolding Services Limited
Don t let them fall for it!
Don t let them fall for it! Most contracts involve working at height. This poses a risk of falling, which you can help mitigate ing protection into your project. Falling from height is the most common
IIRSM ME - 13 th Qatar Group Meeting. 15 th September 2015 Presented by: Mike Preston & Viv Turner Qatar Coordinators
IIRSM ME - 13 th Qatar Group Meeting 15 th September 2015 Presented by: Mike Preston & Viv Turner Qatar Coordinators Before we start Fire alarms, Tests & Evacuations Please complete the attendance sheets
ESSENTIAL STANDARD no.17. Scaffolding
ESSENTIAL STANDARD no.17 Scaffolding KEY MESSAGES Check that scaffolding meets the standards in this guidance. Ensure that regular inspections are carried out on scaffolding by a suitably qualified person.
Promoting Safe Work at Height IIRSM 23 October 2018
Lamis Al-Kaisi Regional Representative Middle East Promoting Safe Work at Height IIRSM 23 October 2018 PASMA is The international not-for-profit industry body for mobile access towers; Promote the safe
Review Date 01/01/2017 Director of Estates and Facilities Expiry Date 14/01/2018 Withdrawn Date
Policy No: RM70 Version: 3.0 Name of Policy: Work at Height Policy Effective From: 05/02/2015 Date Ratified 15/01/2015 Ratified Health and Safety Committee Review Date 01/01/2017 Sponsor Director of Estates
Scheme rules Appendix B Achieving behavioural change (ABC)
SITE SAFETY PLUS Scheme rules Appendix B Achieving behavioural change (ABC) ABC 2019 Site Safety Plus Achieving behavioural change (ABC) Course appendix B 1. Introduction 3 2. Aims and objectives 3 3.
Working at Heights Policy
Working at Heights Policy Rose Bruford College of Theatre and Performance has a legal duty to take suitable and effective measures, so far as is reasonably practicable, to protect students and staff from
This guidance is to give information to users and management on the measures to be taken when planning, erecting and using a loading bay.
SG33:14 Guide to the construction and use of scaffold loading bays and loadbearing platforms 1. INTRODUCTION This guidance is to give information to users and management on the measures to be taken when
Health, Safety and Environment
Health, Safety and Environment SOP-06 Working at Height Produced by HSSE Facilities & GS Department Table of Contents 1 Overview... 1 1.1 Purpose... 1 1.2 Hazards and Risks... 1 1.3 Key Terminology...
ERIC COSSET Director Park Operations Product and Development, Disneyland Paris, France
Attraction Safety Eric Cosset Disneyland Paris 19 September 2016 ERIC COSSET Director Park Operations Product and Development, Disneyland Paris, France Eric has a background in hotel management and has
Supervisor s. Guidebook
Supervisor s Guidebook Contents 1. 1. Introduction 03 02 2. 2. Roles ProBE and Programmes Responsibilities 2008 of Supervisors in Workplace Safety 04 Programme 1: Machines Dangerous to Hands 03 3. Areas
Level 1 Award in Health and Safety in a Construction Environment
Level 1 Award in Health and Safety in a Construction Environment Student notes (sample) Version 2.0 www.britsafe.org Membership Training Qualifications Audit and Consultancy Audit and Policy Consultancy
In This Document. Scaffolds Lesson Plan. Overview
Scaffolds Lesson Plan Sample Lesson Plan In This Document Construction Training Program (10-hour) Planning the Lesson Presenting the Lesson Overview Evaluate Student Learning When OSHA revised its scaffolds
SUMMES1 (SQA Unit Code - F9H3 04) Apply health & safety legislation and working practices
Apply health & safety legislation and working practices Overview This unit is about maintaining a healthy and safe working environment across the range of installation or maintenance work, this involves
Sections of the Health Safety and Welfare at Work Act 2005 directly affecting maintenance management.
Sections of the Health Safety and Welfare at Work Act 2005 directly affecting maintenance management. PART 2 General Duties Chapter 1 General Duties of Employer 8. (1) Every employer shall ensure, as far
WORKING AT HEIGHT. The company will comply with the Work at Height Regulations 2005, its schedules and Codes of Practice.
WORKING AT HEIGHT The company will comply with the Work at Height Regulations 2005, its schedules and Codes of Practice. Principally this means that we comply with the hierarchy of risk in that we shall:
AGR TOWER. Standard Features include. Tower Assembly Training Available
AGR TOWER The Euro Tamper Proof Advanced Guardrail is another solution to safe tower assembly. The ergonomic design lends itself to quick easy assembly and provides collective fall prevention before the
Site Safety Plus Temporary Works Supervisor Training Course (TWSTC) Course appendix M
Site Safety Plus Temporary Works Supervisor Training Course (TWSTC) Course appendix M 1. Introduction 2. Aims and objectives 3. Entry requirements 4. Assessment 5. Delegate numbers 6. Course duration and
Facilities and Estates. Working at Height: Standard Operating Procedure. Document Control Summary. Contents. Change Control Amendment History
Facilities and Working at Height: Standard Operating Procedure Document Control Summary Status: Version: Author/Title: Owner/Title: Approved by: Ratified: Related Trust Strategy and/or Strategic Aims Implementation
FACILITIES AND SERVICES DIVISION PLANNING AND PERFORMANCE MEASUREMENT DIVISION 2016 WORKPLACE HEALTH AND SAFETY (WHS) IMPROVEMENT PLAN
FACILITIES AND SERVICES DIVISION PLANNING AND PERFORMANCE MEASUREMENT DIVISION WORKPLACE HEALTH AND SAFETY (WHS) IMPROVEMENT PLAN WORKPLACE HEALTH AND SAFETY IMPROVEMENT PLAN The Facilities and Services
Health and Safety Policy
Health and Safety Policy T. C. Garrett Ltd. Roofing and Scaffolding Contractor 1 January 2017 SECTION 1: HEALTH AND SAFETY POLICY STATEMENT It is the policy of T C Garrett Ltd. to provide so far as is
NASC Regional TG20 Presentations to Principal Contractor & Temporary Works Consultants RAISING STANDARDS. Leeds 11 th May 2017 London 23 rd May 2017
NASC Regional TG20 Presentations to Principal Contractor & Temporary Works Consultants RAISING STANDARDS Leeds 11 th May 2017 London 23 rd May 2017 Why Use an NASC Member? Delivered by: Rick Statham CMIOSH
METHOD STATEMENT First Fix Joinery
North West Facilities Ltd 17-18 Gaerwen Industrial Gaerwen Isle of Anglesey LL60-6HR Tel: 01248-422555 Fax: 01248-422556 Mobile: 07891-557581 Project/Contract CCG Contractor Apollo Property Services Group
Overview COSVR182. Erect precast concrete structural units
Overview This standard is about interpreting information, adopting safe, healthy and environmentally responsible work practices, selecting and using materials, components, tools and equipment, preparing
All rights reserved IJISE (I)
Safety Management system (SMS) in Construction industries S. RAMPURI, AMIE, M.Tech., PDIS (RLI-Kol.), NEBOSH-IGC, ISE-ICC Email id: shahnawaz.rampuri2@gmail.com 1. ABSTRACT Construction industries is Hazardous
Edge Protection Safety Presentation 2014
Edge Protection Safety Presentation 2014 Presented by Paul Gilligan, General Manager Crowne Plaza Newcastle, United Kingdom Double height edge protection with built-in toe board this makes the site safer
Health Safety, & Environment
GROUP SAFETY HEALTH AND ENVIRONMENT MANUAL R.G. Carter Construction Ltd Integrated Management System Section 7 Health Safety, & Environment Issue Manual No. Holders Name: Issue Date: GROUP HEALTH AND SAFETY
CONTRACTOR WHS HAZARD STANDARD FORMWORK & FALSEWORK EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD FORMWORK & FALSEWORK EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
Annex I: Summary of duty holders
The Construction (Design and Management) Regulations 2007: Industry Guidance Annex I: Summary of duty holders Summary of key changes in CDM 2007 Regulations are re-ordered to group duties together by duty
"SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SUPPORTED SCAFFOLDING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series "Quality Safety and Health Products, for Today...and Tomorrow" OUTLINE OF MAJOR
CDM 2015 In Practice. Craig Foyle CFIOSH IMaPS / Raymond Bone CMIOSH CFaPS. Version 1.0
CDM 2015 In Practice Craig Foyle CFIOSH IMaPS / Raymond Bone CMIOSH CFaPS Version 1.0 Speakers Craig Foyle Involved in engineering construction / construction projects for over twenty years working in
Formwork being erected
CONCRETE FORMWORK Formwork being erected Most of the pads and concrete footing poured Formwork for the parkade walls is built for each pour Most of the parkade walls been completed 2 TYPES OF FORMWORK
COSCCOMO01 - SQA Unit Code FM74 04 Maintain health, safety and welfare systems in construction contracting operations management
Maintain health, safety and welfare systems in construction contracting Overview This unit is about health, safety and welfare policy and its implementation within an organisation. It is applies to construction
I. Introduction/Welcome to MAPP
I. Introduction/Welcome to MAPP II. Company Policy HSE POLICY It is the commitment of MAPP to perform ALL work in the safest manner possible, while maintaining the highest level of construction practices.
HEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE
HEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE The purpose of the health and safety questionnaire is to provide Clients with assurances that all companies on
Generic HEIGHT SAFETY IN FORMWORK 16/11/2012. Built from basic generic components like planks, beams, and posts of timber, steel etc.
Traditional using scaffold material HEIGHT SAFETY IN FORMWORK By James Tay System formwork TOKA FORMWORK Table form Generic Built from basic generic components like planks, beams, and posts of timber,
North West Facilities Ltd
Project/Contract North West Facilities Ltd 17-18 Gaerwen Industrial Estate Gaerwen Isle of Anglesey LL60-6HR Tel: 01248-422555 Fax: 01248-422556 Mobile: 07891 557 581 Full bathroom refit Principle Contractor
COSCCOMO01 (SQA Unit Code - HA32 04) Maintain health, safety and welfare systems in construction contracting operations management
Overview This unit is about health, safety and welfare policy and its implementation within an organisation. It is applies to construction sites, including public areas (e.g. buildings, roads, motorways,
Rolling Towers. Layher Uni Light Tower Instructions for Assembly and Use. Mobile working platforms according to DIN EN 1004:
Instructions for ssembly and Use Mobile working platforms according to DIN EN 00:00-03 Working platform 0.7 x.8 m max. working height: indoors.3 m outdoors.3 m Rolling Towers Load bearing capacity.0 kn/m
Site Safety Plus Achieving Behavioural Change (ABC) Course appendix B
Site Safety Plus Achieving Behavioural Change (ABC) Course appendix B 1. Introduction 2. Aims and objectives 3. Entry requirements 4. Assessment 5. Delegate numbers 6. Course duration and attendance 7.
Introduction. In order to be suitable and sufficient and to comply with legal requirements, a risk assessment must:
Introduction Background and Objective Any employer, who employs more than 5 people, has to carry out a risk assessments of his work activities and record his findings. This is a careful, systematic examination
Industrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ERECTION MANUAL TO BS-EN 1004-2004 Using 2 rung frames (Recommended) Using guardrail frames HORIZONTAL BRACE 1.8m (2040) 2.7m (2041)
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER EDUCATION 3835 East Thousand Oaks Boulevard, #365 Westlake Village, California 91362 Telephone: (805) 494-0444 Facsimile: (805) 494-0441
Managing Contractors Policy (ratified by Full Governing Body 7 th July 2015)
Alcester Academy To be the best that we can be Managing Contractors Policy (ratified by Full Governing Body 7 th July 2015) ALCESTER ACADEMY MANAGING CONTRACTORS POLICY REVIEW PROCEDURES The Managing Contractors
Accessories. Layher Railing clamp Instructions for Assembly and Use. Quality management certified as per DIN ISO 9001:2008 by TÜV-CERT
Layher Railing clamp Instructions for Assembly and Use Quality management certified as per DIN ISO 9001:2008 by TÜV-CERT Accessories BAU/TB...1) Sicherheit geprüft tested safety } Contents 1. General information...2
Working at height and the safe use of plant and machinery in schools
Working at height and the safe use of plant and machinery in schools Presented by: Steve Schroder We are a family owned business who pride ourselves on providing sensible, pragmatic advice for businesses.
SAFE WORK METHOD STATEMENT (SWMS)
ABN: 12 345 678 910 ACN: 123 456 789 Address: Your Company Address PH: Your Company Phone E: Your Company Email Web: Your Company Website PROJECT DETAILS: Project: SAFE WORK METHOD STATEMENT (SWMS) Area:
National Occupational Standards for Health & Safety Stand Alone Units
Unit HSS1: Make sure your own actions reduce risks to health and safety This unit is for everyone at work (whether paid, unpaid, full or part-time). It is about having an appreciation of significant risks
HIGH RISK ACTIVITIES. GD02 Scaffold planning and work at height activities checklist. Design stage. Tender stage. Element Yes No N/A Comments
GD02 Scaffold planning and work at height activities checklist Company name Location Project title Contract no. Design stage Considerations at design stage (pre-construction information/temporary works
COMPONENT SCHEDULE SINGLE WIDTH SPAN TOWERS WITH LADDER FRAMES TO BSEN RUNG STARTER FRAMES
COMPONENT SCHEDULE SINGLE WIDTH SPAN TOWERS WITH LADDER S TO BSEN 1004-2004 STARTER S PLATFORM HEIGHT METRIC 2.4 2.9 3.4 3.9 4.4 4.9 5.4 5.9 6.4 6.9 7.4 7.9 DESCRIPTION IMPERIAL 7 10 9 6 11 2 12 10 14
Low Level Access Platform
ALTO LOW LEVEL ALTO ROOM SCAFFOLD Low Level Access Platform ISSUE 2 Instruction Manual EN 1298-IM-EN The ALTO Room Scaffold System is certified to BS 1139-6:2014 Lakeside Industries Ltd www.altoaccess.com
INTER-DEPARTMENTAL PROCEDURE
INTER-DEPARTMENTAL PROCEDURE OPERATIONS - DUKHAN FIELDS Operations Manager, Dukhan Fields Director Operations Rev. Date Reason A4 Mar13 Issued for use OSD / QC: Rev No. Rev Date DOCUMENT CHANGE HISTORY
Consequences Workers put in dangerous positions Fall
Legislations on Working at height 1 Inadequate Planning and provision for weather Misuse Unprotected edges and openings Structural elements incorrectly erected or installed Load insecurely attached These
PIN s genericone time use access to the registration system online. PIN s are not tied to
1 2 PIN s genericone time use access to the registration system online. PIN s are not tied to a user in any way. It is given to them so that they can gain access to register as a user into the SCOT course.
ACT Scaffolding Services LTD METHOD STATEMENT Scaffold erection
Address: 20 Bole Close, Wombwell, Barnsley, South Yorkshire. S73 8AZ Tel: 07883 780704 Email: enquiries@actscaffold.co.uk Web: www.actscaffold.co.uk Project/Contract Boiler Scaffolding Client Example Comp
Industrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ASSEMBLY GUIDE TO BS-EN 1004-2004 Using 2 rung frames (Recommended) Using Guardrail frames HORIZONTAL BRACE 1.8m (2040) 2.7m (2041)
The followings are the issues pertaining to the problems encountered in the industry, relating to scaffolds and falseworks,
1.0 INTRODUCTION There have been numerous reports in the media about failures of scaffolds and falseworks. The main reasons could be attributed to the lack of attention on the safety aspects in the installation,
(6) Crawl boards and ladders used for roof work shall be securely fastened over the ridge of the roof or be otherwise effectively anchored.
Newfoundland & Labrador - Terre-Neuve-et-Labrador Ladder Safety - Sécurité des échelles This material has been extracted from the Acts and Regulations of the Province to help students understand the subject.
Risk Assessment & Safe Working Practice
RA Ref Number: 01f Revision: 2 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Working at Heights Fixed Tubular Scaffolds Next Review Date: 01/04/2019 Notes: Please
Health & Safety Policy Statement Organisation & Responsibilities
Health & Safety Policy Statement Organisation & Responsibilities Prepared by: Barry Harden Joint Managing Director Temple Lifts Limited Regency House, 33-49 Farwig Lane, Bromley, Kent, BR1 3RE. Tel: 020
ASTHSS1 - SQA Unit Code F7EG 04 Make sure your own actions reduce risks to health and safety
Make sure your own actions reduce risks to health and safety Overview This unit is for everyone at work (whether paid, unpaid, full or part-time). It is about having an appreciation of significant risks
(GN02) LADDERS & STEP LADDERS
WHEN PLANNING WAH, THE HEIRARCHY OF CONTROLS NEED TO BE APPLIED. The selection of ladders & step ladders MUST only be considered where a RISK ASSESSMENT has identified that it is NOT REASONABLE to use
North West Facilities Ltd
North West Facilities Ltd 17-18 Gaerwen Industrial Tel: 01248-422555 Fax: 01248-422556 Mobile: 07891-557581 Project/Contract Re-decorating of kitchens, bathrooms and other rooms in residential properties
EASY STAIR EASIER! SAFER! Easy Stair improves site safety by removing the need for site personnel to climb ladders whilst carrying tools or materials.
EASY STAIR Easy Stair provides EASY, SAFE access between oor levels from the earliest stages of construction. EASIER! Easy Stair is a lightweight temporary staircase which makes life on site much EASIER
Transport Sector Portfolio
Transport Sector Portfolio Rehabilitation of 4.476 Kms of Asphalt Road in Shindand District, Herat Province, Afghanistan. United Nations Office for Project Services ( UNOPS ) -and- Name of Contractor Site
LADDERSPAN AGR. BoSS Camlock Advance Guardrail Mobile Aluminium Tower 1450/850 Frames USER GUIDE
LADDERSPAN AGR BoSS Camlock Advance Guardrail Mobile Aluminium Tower 1450/850 Frames USER GUIDE Contents Safety First Safety Checklist Quantity Schedules Assembly and Dismantling Procedure Toe Boards Stabilisers
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF)
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF) EHS Regulatory Instrument Code of Practice EHS RI - CoP 40.0 False Work (Formwork) Version 2.0 February 2012 ACKNOWLEDGEMENTS With gratitude Abu Dhabi
... Think safety! Working at heights. HSE in general. Environment. Health. Safety
... Think safety! Working at heights HSE in general Environment Health Safety 1 Working at heights Gasunie is one of the biggest gas infrastructure companies in Europe. Within the company, we give safety
Industrial Aluminium Towers
HORIZONTAL 1.8m (2040) 2.7m (2041) TOE BOARD 1.8m (2066) 2.7m (2068) Industrial Aluminium Towers DOUBLE WIDTH SPAN & VERTICAL ASSEMBLY GUIDE TO BS-EN 1004-2004 Using the 3T (Through the Trap ) Assembly
Tailgate Topic Review
[PP 08/05/2018-08/18/2018] Scaffold-Ladder Safety Important Scaffolding Safety Tips For Workers Every year in the United States there are thousands of scaffold-related injuries and roughly 40 scaffold-related
Contents 2017 VR ACCESS SOLUTIONS ALL RIGHTS RESERVED.
Issue 1 February 2017 Contents Introduction... 1 NASC Compliance... 2 Safety Information... 3 Component Details... 4 Component Load Capacities... 7 Deck Arrangements... 9 Bracing and Tying... 11 Safe Working
PRACTICAL IMPLEMENTATION OF A COMPREHENSIVE OSH MANAGEMENT SYSTEM FOR WINDMILLS IN A REPAIR AND MAINTENANCE COMPANY IN PORTUGAL
PRACTICAL IMPLEMENTATION OF A COMPREHENSIVE OSH MANAGEMENT SYSTEM FOR WINDMILLS IN A REPAIR AND MAINTENANCE COMPANY IN PORTUGAL 1. Organisations involved VESTAS 2. Description of the case 2.1. Introduction
Health and Safety Policy
Health and Safety Policy Global Policy Revised May 2018 We are committed to providing a safe and healthy workplace for all our employees, and to protecting our customers and the public by ensuring our
Scaffolding Safety Awareness Program
Page 1 of 6 Sect: 1.0 Purpose 2.0 Scope While Ardent employees do not erect or modify scaffolding, it is essential that they understand and follow standard industry scaffold tagging procedures when accessing
WORK AT HEIGHT. The Work at Height Regulations 2005 apply to all work at height where there is a risk of a fall liable to cause injury 1.
UNIVERSITY SAFETY OFFICE 10 Parks Road, Oxford, OX1 3PD General Enquiries Tel: +44 (0)1865 270811 Fax: +44 (0)1865 270816 Web: www.admin.ox.ac.uk/safety/ UNIVERSITY POLICY STATEMENT S3/11 1. Introduction
Corporate Policy and Procedure
Corporate Policy and Procedure POLICY CATEGORY AUTHORITY RELATED POLICIES APPROVED BY Safety Management When Outside Contractors are Retained (Contractor Safety Management Program) (the Policy ) Health
3T - Through The Trapdoor Method
ALTO MEDIUM DUTY STAIRWELL TOWER Aluminium Access Tower ISSUE 3 Instruction Manual EN 1298-IM-EN The ALTO MD Stairwell Tower 3T - Through The Trapdoor Method Lakeside Industries Ltd www.altoaccess.com
Industrial Aluminium Towers
Industrial Aluminium Towers SINGLE WIDTH LADDERSPAN & VERTICAL LADDER ERECTION MANUAL HORIZONTAL BRACE 1.8m (2040) 2.7m (2041) REVISED EDITION TOE BOARD 1.8m (2065) 2.7m (2067) LADDERSPAN TRAP PLATFORM
Fatal Falls from Elevation in Construction: Analysis of Incidents in Washington
Fatal Falls from Elevation in Construction: Analysis of Incidents in Washington Peregrin Spielholz Tom Sjostrom Randy Clark FACE/WA Fatality Assessment & Control Evaluation Safety and Health Assessment
Fall Protection Plan Developer (FPPD) Unit Standard (229994) Target audience and relevance. Course content. Course duration
Fall Protection Plan Developer (FPPD) Unit Standard (229994) The person wishing to acquire the competencies in this standard will be people responsible for the safety and protection of people working at
OSH LEGISLATION LAW AND REGULATION TO CONSTRUCTION SAFETY LAW AND REGULATION TO CONSTRUCTION SAFETY 20/2/2013
LAW AND REGULATION TO CONSTRUCTION SAFETY Sr Dr. Mohd Saidin Misnan UNIVERSITI TEKNOLOGI MALAYSIA 81310 UTM Skudai, Johor, Malaysia LAW AND REGULATION TO CONSTRUCTION SAFETY OSH LEGISLATION 1 To enable
Temporary Works Construction Safety and Health Awareness Day The Fairway, Elmhirst Way, Dodworth, Barnsley S75 4LS
Temporary Works Construction Safety and Health Awareness Day The Fairway, Elmhirst Way, Dodworth, Barnsley S75 4LS EVERY WEEK ONE OF US DIES Help for the industry from the industry Wednesday 1st October
GENERAL SAFETY RULES DOUBLE WIDTH 232 (NARROW RUNG) 3T INSTRUCTION MANUAL DISMANTLING NOTES: The 232 Tower Approved to the requirements of BS EN 1004
GENERAL SAFETY RULES DOUBLE WIDTH 232 (NARROW RUNG) 3T INSTRUCTION MANUAL The 232 Tower Approved to the requirements of BS EN 1004 MAX SAFE WORKING LOAD FOR STRUCTURE: 750KG MAX SAFE WORKING LOAD FOR PLATFORM:
Site Safety Plus. Site Management Safety Training Scheme (SMSTS) Course appendix G
Page 1 Site Safety Plus Site Management Safety Training Scheme (SMSTS) Course appendix G 1. Introduction... 2 2. Aims and objectives... 2 3. Entry requirements... 2 4. Assessment... 2 5. Delegate numbers...
A guide to Health and Safety for Lone Workers
A guide to Health and Safety for Lone Workers April 2016 For other information please contact: British Security Industry Association t: 0845 389 3889 e: info@bsia.co.uk www.bsia.co.uk Form No. 248 Issue
Health Safety and Welfare Policy
Health Safety and Welfare Policy For IDG Tool Repair and Electrical Testing Ltd 19 Bourne Way Swanley Kent BR8 7HX David Griffiths CONSULTANT HSWS LTD 01322 662363 Section 1 Statement of General Policy