PIP RFTF1000 Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing
|
|
|
- Jared Ramsey
- 5 years ago
- Views:
Transcription
1 EDITORIAL REVISION March 2013 Process Industry Practices Refractory PIP RFTF1000 Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PUBLISHING HISTORY January 2013 Issued March 2013 Editorial Revision Not printed with State funds
3 EDITORIAL REVISION March 2013 Process Industry Practices Refractory PIP RFTF1000 Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing Table of Contents 1. Introduction Purpose Scope References Process Industry Practices Industry Codes and Standards Definitions Requirements General Ceramic Fiber Refractory Lining Anchors Confirmation of Materials by Purchaser Surface Preparation Installer Prequalification Requirement Installation Inspection and Testing Lining Repairs... 5 Data Form RFTF1000-F Inspection Hold Point and Sign-Off Schedule Process Industry Practices Page 1 of 5
4 PIP RFTF1000 EDITORIAL REVISION Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing March Introduction 1.1 Purpose This Practice provides requirements for quality control and quality assurance for the installation of ceramic fiber refractory. 1.2 Scope 2. References This Practice covers the general requirements for inspection of ceramic fiber refractory linings. Inspection methods include documentation review, in-progress installation inspection, and final inspections of the completed lining. Applicable parts of the following Practices and industry codes and standards shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles are used herein where appropriate. 2.1 Process Industry Practices (PIP) PIP RFSF1000 Ceramic Fiber Refractory Material Specification PIP RFSF2000 Ceramic Fiber Refractory Installation Specification PIP RFIA1000 Refractory Anchor and Accessory Installation Details (under development) PIP RFSA1000 Refractory Anchor and Accessories Specification (under development) PIP RFTA1000 Refractory Anchor and Accessories Installation Qualification, Inspection, and Testing 2.2 Industry Codes and Standards 3. Definitions American Society for Testing and Materials (ASTM) ASTM C71 Standard Terminology Relating to Refractories With the exception of the terms listed in this section, terms used in this Practice are defined in accordance with ASTM C 71. If a definition as used in this Practice differs from the one listed in the referenced documents, the modified definition is included in the following listing: installer: Party responsible for installing the ceramic fiber refractory. This includes each individual ceramic fiber installer, who is pre-qualified/certified before allowed to install ceramic fiber lining. installer s inspector: Installer s authorized representative, responsible for the quality control of all materials, installations, and workmanship provided by the installers, and any of the installer s subcontractors or vendors owner: Party who owns the facility wherein the refractory lined equipment will be used Process Industry Practice Page 2 of 5
5 PIP RFTF1000 EDITORIAL REVISION Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing March 2013 purchaser: Party who awards the contract to the installer. The purchaser may be the owner or the owner s authorized agent. purchaser s inspector: Purchaser s authorized representative with authority to act in the interest of, and on behalf of, the purchaser in all quality assurance matters. The inspector shall be experienced in the evaluation of ceramic fiber installation techniques and completed linings. 4. Requirements 4.1 General Conflicts, Exceptions, Deviations, and Substitutions All conflicts between the referenced documents and this Practice shall be submitted in writing to purchaser for clarification and resolution before proceeding All exceptions, deviations, and substitutions to the requirements specified herein and in referenced documents shall be approved by purchaser Regulations and Material Safety Data Sheets (MSDS) Ceramic fiber refractory materials shall be in accordance with all applicable federal, state, and local codes and regulations on storage, handling, safety, and environmental requirements The latest issue of the ceramic fiber refractory material manufacturer s MSDS shall be provided for each installation site and complied with during the installation of the ceramic fiber refractory Documentation Ceramic fiber refractory material manufacturer s product data sheets and the approved installation procedure in accordance with PIP RFSF2000 shall be provided for each installation site and complied with during the installation of the ceramic fiber refractory Notification Purchaser s inspector shall be given adequate notice (e.g., time and location) before the start of all work and hold points, so that the inspector can witness the work. 4.2 Ceramic Fiber Refractory Lining Anchors The qualification of ceramic fiber refractory anchor welders, selection of anchors, anchor installation, anchor testing, and inspection shall be in accordance with PIP RFIA1000, PIP RFSA1000, and PIP RFTA Confirmation of Materials by Purchaser Purchaser s inspector shall confirm that the ceramic fiber refractory lining materials are in accordance with the contract documents and PIP RFSF1000. Items to be confirmed shall include material, style, geometry and/or dimensions of blankets, board, or modules and accessories. Process Industry Practices Page 3 of 5
6 PIP RFTF1000 EDITORIAL REVISION Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing March Purchaser s inspector shall confirm that ceramic fiber materials and accessories are not damaged, contaminated, or wet. See PIP RFSF2000 for water contamination evaluation criteria. Comment: Damage and contamination are defined as degradations of the lining that the purchaser s inspector determines to be detrimental to the serviceability of the ceramic fiber lining. Examples of damage include cuts, cracks, tears, compression, and missing materials. Examples of contamination include sea water, dirt, chemicals, and other foreign materials Purchaser s inspector shall confirm that positive material identification (PMI) has been performed during installation on module hardware and loose metallic components. All items shall be in accordance with the contract documents and appropriately marked. 4.4 Surface Preparation Surface preparation for the installation of coating, ceramic fiber refractory and accessories shall be in accordance with PIP RFSF Installer Prequalification Requirement Documentation shall be provided, from other recently completed installations, that confirms each installer s ability to install the specific material type in a similar or same application as proposed for the subject installation. The documentation shall be provided to purchaser for review and determination of acceptance If the documentation specified in Section cannot be provided, each installer shall be required to produce a mockup of the proposed installation. The mockup shall include all critical service areas as defined by purchaser s inspector Unless Section or is satisfactorily completed, installation of ceramic fiber shall not be permitted by that installer The installer s inspector shall provide documentation of their ability to inspect ceramic fiber linings. The documentation shall be provided to purchaser for review and determination of acceptance. 4.6 Installation Inspection and Testing General Installation of ceramic fiber anchors shall be in accordance with PIP RFIA1000. Inspection and testing shall be in accordance with PIP RFTA In-progress inspection of the refractory lining shall confirm that ceramic fiber materials, accessories, anchor system and layout, and lining design details including any coatings are in accordance with the contract documents. Comment: In-progress refers to continuous monitoring at regular intervals throughout the duration of the work. Process Industry Practice Page 4 of 5
7 PIP RFTF1000 EDITORIAL REVISION Ceramic Fiber Refractory Installation Qualification, Inspection, and Testing March Inspection of ceramic fiber refractory lining installation shall be by visual inspection in accordance with Section Hold Points Inspection hold points shall be in accordance with purchaser s PIP RFTF1000-F Inspection Hold Point and Sign-Off Schedule Work shall not progress until all parties listed on purchaser s PIP RFTF1000-F have signed off at each hold point in the order as shown on the form Visual Inspection 4.7 Lining Repairs Before ceramic fiber refractory installation, welded anchors and accessories shall be 100% visually examined to confirm that all welding is in accordance with PIP RFIA The layout, size and location of anchorage shall be in accordance with the detailed design drawings accepted by the purchaser By visual inspection of the in-progress ceramic fiber refractory lining installation, the following shall be confirmed to be in accordance with the lining design drawings accepted by the purchaser: a. Lining thickness b. Ceramic fiber layout c. Backup materials d. Expansion joints e. Anchor attachment f. Lining construction The installed ceramic fiber refractory lining shall be confirmed to be within design dimensional tolerances accepted by the purchaser During in-progress inspection of the ceramic fiber refractory installation, any defects found shall be cause for work to cease. All inspection parties shall be notified of the defects and a report detailing type and extent of defects and the recommended repair procedure prepared. The detailed inspection report, and recommended repair procedure shall be submitted to purchaser for resolution Defects noted in the lining during the final inspection shall be brought to the attention of the purchaser for resolution. All lining repairs shall be subjected to the same inspection as the original lining. Process Industry Practices Page 5 of 5
8 ASSOC. PIP: RFTF1000 INSPECTION HOLD POINT AND SIGN-OFF SCHEDULE PIP RFTF1000-F CERAMIC FIBER REFRACTORY INSTALLATION QUALIFICATION, INSPECTION, AND TESTING PAGE 1 OF 1 MARCH 2013 NO. DATE REVISION DESCRIPTION BY CHECKED APPROVED PROJECT NO. FACILITY NAME LOCATION PROJECT DOCUMENT NO. SUPPLIER: REPORT DATE: / / SIGNOFF SCHEDULE HOLD POINT INSTALLER S INSPECTOR PURCHASER S INSPECTOR OWNER REQUIRED INITIALS/ DATE REQUIRED INITIALS/ DATE REQUIRED INITIALS/ DATE 1. REVIEW DESIGN DRAWINGS AND PROCEDURES YES YES YES 2. INSTALLER PREQUALIFICATION YES YES NO 3. CONFIRM MATERIALS YES YES NO 4. SURFACE PREPARATION YES YES NO 5. ANCHOR SYSTEM INSTALLATION YES YES YES 6. COATING YES YES NO 7. IN-PROGRESS VISUAL INSPECTION YES YES NO 8. FINAL LINING INSPECTION YES YES YES COMMENTS: INSTALLER S INSPECTOR SIGNATURE: PURCHASER S INSPECTOR SIGNATURE: (PRINTED) (PRINTED)
PIP RFTB1000 Brick Refractory Installation Qualification, Inspection, and Testing
EDITORIAL REVISION March 2013 Process Industry Practices Refractory PIP RFTB1000 Brick Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
PIP RFTA1000 Refractory Anchor and Accessory Installation Qualification, Inspection, and Testing
January 2017 Refractory PIP RFTA1000 Refractory Anchor and Accessory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
March Process Industry Practices Refractory. PIP RFIA1000 Refractory Anchor and Accessory Installation Details
March 2014 Process Industry Practices Refractory PIP RFIA1000 Refractory Anchor and Accessory Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
PIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing
March 2013 Process Industry Practices Refractory PIP RFTM1000 Monolithic Refractory Installation Qualification, Inspection, and Testing PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
COMPLETE REVISION September Process Industry Practices Piping. PIP PNSM0120 Purchasing Requirements for Bolting
September 2013 Process Industry Practices Piping Purchasing Requirements for Bolting PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
PIP PNSM0115 Purchasing Requirements for Pipe
December 2016 Piping PIP Purchasing Requirements for Pipe PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
REAFFIRMATION WITH EDITORIAL REVISION September Process Industry Practices Insulation. PIP INIH1000 Hot Insulation Installation Details
REAFFIRMATION WITH EDITORIAL REVISION September 2012 Process Industry Practices Insulation PIP INIH1000 Hot Insulation Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
REAFFIRMATION WITH EDITORIAL REVISION October Process Industry Practices Insulation. PIP INIC1000 Cold Insulation Installation Details
REAFFIRMATION WITH EDITORIAL REVISION October 2012 Process Industry Practices Insulation PIP INIC1000 Cold Insulation Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
PIP VESSP002 Supplemental Design and Fabrication Specification for Shell and Plate Heat Exchangers ASME Code Section VIII, Divisions 1 and 2
November 2014 Process Industry Practices Vessels PIP VESSP002 Supplemental Design and Fabrication Specification for Shell and Plate Heat Exchangers ASME Code Section VIII, Divisions 1 and 2 PURPOSE AND
COMPLETE REVISION November Process Industry Practices Architectural. PIP ARS08111 Standard Steel Doors and Frames Supplier Specification
November 2012 Process Industry Practices Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
PIP ARS08111 Standard Steel Doors and Frames Supplier Specification
May 2018 Architectural PIP ARS08111 Standard Steel Doors and Frames Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
PIP STF05511 Fixed Industrial Stairs
TECHNICAL CORRECTION January 2017 Structural PIP STF05511 Fixed Industrial Stairs PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
EDITORIAL REVISION January Process Industry Practices Vessels. PIP VEFV1100M Vessel/S&T Heat Exchanger Standard Details (Metric Units)
Vessels PIP VEFV1100M Vessel/S&T Heat Exchanger Standard Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units)
TECHNICAL CORRECTION February 2014 Process Industry Practices Vessels PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines
February 2017 Pipeline Systems PIP PLSC0013 Non-Destructive Examination of ASME B31.4 and B31.8 Metallic Pipelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
EDITORIAL REVISION August Process Industry Practices Insulation. PIP INEG2000 Guidelines for Use of Insulation Practices
August 2013 Process Industry Practices Insulation PIP INEG2000 Guidelines for Use of Insulation Practices PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units)
TECHNICAL REVISION October 2017 Vessels PIP VEFV1100 Vessel/S&T Heat Exchanger Standard Details (U.S. Customary Units) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
PIP STF05501 Fixed Ladders Fabrication Details
COMPLETE REVISION July 2018 Structural PIP STF05501 Fixed Ladders Fabrication Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
PIP INSA1000 Acoustic Insulation Systems Specification
TECHNICAL REVISION April 2015 Insulation PIP INSA1000 Acoustic Insulation Systems Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
PIP STF05521 Details for Angle Railings for Walking and Working Surfaces
TECHNICAL CORRECTION January 2017 Structural PIP STF05521 Details for Angle Railings for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of
COMPLETE REVISION January Process Industry Practices Electrical. PIP ELIGD000 Grounding Installation Details
COMPLETE REVISION January 2010 Process Industry Practices Electrical PIP ELIGD000 Grounding Installation Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
Electrical PIP ELILS000 Lighting and Receptacle Installation Details for Class I, Division 2, Class II, Division 2, and Unclassified Areas
August 2017 Electrical PIP ELILS000 Lighting and Receptacle Installation Details for Class I, Division 2, Class II, Division 2, and Unclassified Areas PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
COMPLETE REVISION October Process Industry Practices Piping. PIP PNSC0036 High Density Polyethylene (HDPE) Piping Installation Specification
Piping High Density Polyethylene (HDPE) Piping Installation Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
EDITORIAL REVISION March Process Industry Practices Refractory. PIP RFSM1000 Monolithic Refractory Material Specification
March 2013 Process Industry Practices Refractory PIP RFSM1000 Monolithic Refractory Material Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry
Pipeline Systems PLSC0017 Requirements for Welder Qualifications in Accordance with ASME Section IX
June 2018 Pipeline Systems PLSC0017 Requirements for Welder Qualifications in Accordance with ASME Section IX PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
PIP STE05501 Fixed Ladders and Cages Design Guide
TECHNICAL CORRECTION January 2017 Structural PIP STE05501 Fixed Ladders and Cages Design Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
PIP CTSC1000 Application of Coatings to Concrete
REAFFIRMATION WITH EDITORIAL REVISION July 2017 Coatings PIP Application of Coatings to Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
COMPLETE REVISION November Process Industry Practices Structural. PIP STF05530 Grating Fabrication Details
COMPLETE REVISION November 2006 Process Industry Practices Structural PIP STF05530 Grating Fabrication Details PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
TECHNICAL REVISION September Process Industry Practices Refractory. PIP RFSB2000 Brick Refractory Installation Specification
September 2013 Process Industry Practices Refractory PIP RFSB2000 Brick Refractory Installation Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
PIP PNEM0001 Piping Service Index
REAFFIRMATION W/EDITORIAL REVISION October 2016 Piping PIP PNEM0001 Piping Service Index PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
March Process Industry Practices Structural. PIP STE05535 Vessel Circular Platform Detail Guidelines
Structural PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing
PIP PCEPA003 Process Analyzer System Field Installation Guidelines
January 2016 Process Control PIP PCEPA003 Process Analyzer System Field Installation Guidelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
COMPLETE REVISION June Process Industry Practices Architectural. PIP ARS08390 Blast Resistant Doors, Frames, and Related Hardware Specification
June 2013 Process Industry Practices Architectural PIP ARS08390 Blast Resistant Doors, Frames, and Related Hardware Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
PIP PNC00001 Pipe Support Criteria for ASME B31.3 Metallic Piping
July 2017 Piping PIP PNC00001 Pipe Support Criteria for ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
COMPLETE REVISION April Process Industry Practices Piping. PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.
April 2012 Process Industry Practices Piping PIP PNC00004 Piping Stress Analysis Criteria for ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
PIP REEE002 Reliability Indicators for Rotating Machinery
June 2016 Machinery PIP REEE002 Reliability Indicators for Rotating Machinery PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
PIP ARS08710 Standard Steel Door Hardware Supplier Specification
April 2018 Architectural PIP ARS08710 Standard Steel Door Hardware Supplier Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
PIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service
TECHNICAL REVISION August 2015 Insulation PIP INSR1000 Installation of Flexible, Removable/Reusable Insulation Covers for Hot Insulation Service PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
COMPLETE REVISION February Process Industry Practices Structural. PIP STS05130 Structural and Miscellaneous Steel Erection Specification
COMPLETE REVISION February 2011 Structural PIP STS05130 Structural and Miscellaneous Steel Erection Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process
COMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves
May 2013 Process Industry Practices Piping Purchasing Requirements for Valves PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
INS QA Programme Requirements
Specification Date: 20/3/17 INS QA Programme Requirements UNCONTROLLED WHEN PRINTED Author: J Cooch AUTHORISATION Date: 20/3/17 A Brown Owner: J Cooch (Signature) N.B. only required for hard copy If issued
MATERIAL REQUISITION FOR BOLTS AND NUTS
Title: MATERIAL REQUISITION FOR BOLTS AND NUTS Page: 1 of 12 MATERIAL REQUISITION FOR BOLTS AND NUTS 6 5 4 3 2 1 0 08-JUN-2013 ISSUED FOR APPROVAL M. KAMALOU A.MOHAMADIZADE A.MOHAMADIZADE REV. DATE STATUS
Trident Precision Manufacturing
Trident Precision Manufacturing QASQC Rev. A 6/7/06 Title: Supplier Quality Clauses Author: April V. Lusk Director of Quality General Suppliers are responsible for compliance to all stated Quality Clauses
Quality Management System
Quality Management System 6.1 Quality Q-Codes () 6.1 Quality Q-Codes Quality Clauses The following quality control clauses apply when specifically noted on the Gear Technology purchase order: Q1- Material
Student Services & Classroom Addition
SECTION 014000 - QUALITY REQUIREMENTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes administrative and procedural requirements for quality assurance and quality control. B. Testing and inspecting services
COMPLETE REVISION October Process Industry Practices Civil. PIP CVC01017 Plant Site Data Sheet
COMPLETE REVISION October 2011 Process Industry Practices Civil PIP Plant Site Data Sheet PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities,
QUALITY REQUIREMENTS
SECTION 014000 - QUALITY REQUIREMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
Prototype Integration Facility SUPPLIER QUALITY SYSTEM REQUIREMENTS
PIF Supplier Quality System Requirements Page 1 of 8 Prototype Integration Facility SUPPLIER QUALITY SYSTEM REQUIREMENTS Approved by: (W. Daniel Featherston- signature on file) PIF Program Manager (Mitchell
TABLE OF CONTENTS. 1.0 INTRODUCTION Page SCOPE Page REFERENCES Page REQUIREMENTS Page QUALITY ASSURANCE Page 8
TABLE OF CONTENTS 1.0 INTRODUCTION Page 3 2.0 SCOPE Page 3 3.0 REFERENCES Page 4 4.0 REQUIREMENTS Page 5 5.0 QUALITY ASSURANCE Page 8 6.0 SUBMITTALS Page 9 7.0 PREPARATION FOR SHIPMENT Page 10 Page 2 of
Ontario ENGINEERING STANDARD SPECIFICATION 1/7 REV. SPECIALTY ENGINEERING MATERIALS ENGINEERING QA CLARABELLE MILL NI-HARD TYPE 1 LINERS
1/7 Rev Description Approved by Reviewed by Issue Date YYYY/MM/DD 1 Document format and number changed. Previous number QA - 015 PB 011/1/4 PB 011/1/4 01/04/19 SPEC Reviewed 016 Regional Approvals removed,
Supplier Quality Procurement Requirements (SQPR) DATED: 01/31/2018
Supplier Quality Procurement Requirements (SQPR) DATED: 01/31/2018 NOTE: Futuramic is responsible for ensuring all items procured from its supplier base including customer directed sources, conform to
Specification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
SECTION QUALITY REQUIREMENTS
SECTION 014000 - PART 1 - GENERAL 1.1 SUMMARY A. Defines SRP requirements for Contractor Quality Control and Owner Quality Assurance. As an Electric and Water Utility, SRP has many critical facilities.
TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 052100 - STEEL JOISTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections
SECTION CORROSION PROTECTION FOR CONCRETE STRUCTURES
0590-104217 PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 09850 CORROSION PROTECTION FOR CONCRETE STRUCTURES A. This specification covers work, materials and equipment required for protecting the interior
1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
NR CHECKLIST Rev. 1. QAM IMP References NBIC Part 3, 1.8 Y N Y N a. Organization. Company Name/Certificate Number: Page 1 of 26
Company Name/Certificate Number: Page 1 of 26 a. Organization a.1. Has the Organizational Structure of the program identified the levels of management responsible for the Quality System Program, including
DS131 EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
SPECIAL INSPECTION & TESTING AGREEMENT CITY OF NORTON SHORES BUILDING DEPARTMENT Michigan Building Code 2015
Project Name: Project Address: SPECIAL INSPECTION & TESTING AGREEMENT CITY OF NORTON SHORES BUILDING DEPARTMENT Michigan Building Code 201 Building Permit No.: PRIOR TO THE ISSUANCE OF THE BUILDING PERMIT:
***************************************************************************************************************
03365 POST-TENSIONED CONCRETE *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 03 38 00. ***************************************************************************************************************
PURCHASE ORDER ATTACHMENT Q-201 SOFTWARE QUALITY SUBCONTRACTOR REQUIREMENTS TASK DESCRIPTIONS - PURCHASE CATEGORY "A"
PURCHASE ORDER ATTACHMENT Q-201 SOFTWARE QUALITY SUBCONTRACTOR REQUIREMENTS TASK DESCRIPTIONS - PURCHASE CATEGORY "A" 1. SOFTWARE QUALITY PROGRAM. This attachment establishes the software quality requirements
PIP PNSC0011 Installation of ASME B31.3 Metallic Piping
February 2015 Piping PIP PNSC0011 Installation of ASME B31.3 Metallic Piping PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
Special Provision No. 199S66 March For the purpose of this Special Provision, the following definitions apply:
QUALITY CONFORMANCE REQUIREMENTS Special Provision No. 199S66 March 2018 1.0 SCOPE This Special Provision describes the process for the assessment of conformance to the quality requirements and the administrative
There is an inspection report prepared after the Digester cleaning was carried out.
TERMS OF REFERENCE FOR CONSTRUCTION MANAGEMENT AND INSPECTION FOR THE REPAIRS AND GASPROOFING OF DIGESTER NO.2 AT THE GUELPH WASTEWATER TREATMENT PLANT BACKGROUND The work generally consists of Repairs
Quality Control and Quality Assurance for Installation of Steel Deck
s American National standards institute/ steel deck institute QA/QC - 2011 Standard for Quality Control and Quality Assurance for Installation of Steel Deck copyright 2012 steel deck institute 1. General
Facilities Planning and Construction (FP&C)
Appendix 8.4a Facilities Planning and Construction (FP&C) UAA FP&C Quality Assessment Checklist (A) Project: PM: Project ID: Updated:
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 01 4000 - QUALITY REQUIREMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
Project Procedures 1.0 PURPOSE 2.0 SCOPE 3.0 REFERENCES. No.: P /21/2012 PAGE 1 OF 13 BASIS OF OPERATION
Project Procedures BASIS OF OPERATION 09/21/2012 PAGE 1 OF 13 1.0 PURPOSE The purpose of this procedure is to establish the basis of operations that ensures that Project activities, including engineering,
CSI Exceed PART 1.0 GENERAL. plae.us SUMMARY 1.2 REFERENCES
CSI Exceed March 1st, 2018-This document is provided solely as a convenience for spec writers in the drafting process. PLAE will not be held responsible for the use or alteration of any information contained
Requirements for Suppliers
1.0 INTRODUCTION This document establishes requirements designed to ensure Park Engineering & Manufacturing Inc. (PEM) suppliers produce product that meets PEM s quality expectations and terms. Only suppliers
SECTION GROUND STORAGE TANK
SECTION 13210 GROUND STORAGE TANK PART 1 GENERAL 1.01 Summary A. Section Includes: Provision for welded steel storage tank design, fabrication, construction and erection, including tank accessories. B.
Ontario ENGINEERING STANDARD SPECIFICATION 1/8 REV. SPECIALTY ENGINEERING MATERIALS ENGINEERING QA CLARABELLE MILL CAST Q & T STEEL LINERS
1/8 Rev Description Approved by Reviewed by Issue Date YYYY/MM/DD 1 Document format and number changed. Previous number QA - 016 PB 011/1/4 PB 011/1/4 01/04/19 SPEC Reviewed 016 Regional Approvals removed,
REQUEST FOR PROPOSAL: Construction Management at Risk Services Hamilton International Air Cargo Logistics Facility. RFP Components
REQUEST FOR PROPOSAL: Construction Management at Risk Services Hamilton International Air Cargo Logistics Facility RFP Components CLIENT: TradePort International Corporation, Operators of John C. Munro
SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
SHORING & UNDERPINNING 02250
Subsidiary of Hubbell Power Systems 210 North Allen St. Centralia, MO 65240 Phone: (573) 682-8414 Fax: (573) 682-8660 E-mail: hpscontact@hps.hubbell.com www.abchance.com This MANU-SPEC utilizes the Construction
SUPPLIER REQUIREMENTS FOR QUALITY, DESIGN & MANUFACTURING
SUPPLIER REQUIREMENTS FOR QUALITY, DESIGN & MANUFACTURING 1.0 PURPOSE The purpose of this document is to define the requirements of Anaren Microwave, Anaren Ceramics and MS Kennedy (collectively Anaren)
SECTION QUALITY REQUIREMENTS
SECTION 01 40 00 QUALITY REQUIREMENTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Quality control and control of installation. Tolerances. References. Labeling. Mock-up requirements. Testing and inspection
SECTION DRY-PLACED GRANITE
SECTION 04 41 11 DRY-PLACED GRANITE This guide specification utilizes recommendations and formats contained in references of the Construction Specifications Institute (CSI), including the CSI Practice
SECTION STRUCTURE MOUNT RAILING SYSTEM
SECTION 05520 STRUCTURE MOUNT RAILING SYSTEM Peak Fall Protection specializes in the design, engineering, fabrication, installation, and certification of fall protection safety systems. Our team of safety
SECTION A. Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 084239 PRESSURE-RESISTANT ENTRANCES **Note to Specifier** This specification contains component and configuration options. Where indicated choose the appropriate choice for your specific
Town of Poughkeepsie BUILDING DEPARTMENT 1 OVEROCKER ROAD POUGHKEEPSIE, NY12603 (845)
(845) 485-3655 Special Inspection and Testing Guidelines The special inspection requirements of the Building Code of New York State are detailed and can be a challenge to work with. The Town of Poughkeepsie
CONCRETE REINFORCEMENT. 1. Supplementary Conditions, General Conditions, General Requirements, shall govern Work of this Section.
CITY OF BRAMPTON LANDSCAPE SPECIFICATIONS SECTION 03200-1 PART 1 GENERAL 1.1 General Requirements 1. Supplementary Conditions, General Conditions, General Requirements, shall govern Work of this Section.
SECTION METAL DECKING. A. Extent of metal decking is indicated on Plans, including basic layout for the following type of deck required:
PART 1 GENERAL 1.1 WORK INCLUDED A. Extent of metal decking is indicated on Plans, including basic layout for the following type of deck required: 1.2 RELATED WORK 1. Metal Roof Deck. A. Structural Steel:
SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 7 SECTION 083925 MECHANICAL ROOM FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for
SPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
C. Requirements of this Section relate to customized fabrication and installation procedures, not production of standard products.
SECTION 01400 QUALITY CONTROL SERVICES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and other Division-1 Specification
INSTRUCTIONS FOR COMPLETING PRE-QUALIFICATION STATEMENT
INSTRUCTIONS FOR COMPLETING PRE-QUALIFICATION STATEMENT Item 1 Select only those projects that you wish to pre-qualify. Item 2 Enter full company name. Item 2a Check the appropriate box. Item 2b Insert
Supplier Requirements Manual
ABACO-EQP-001 REV A Supplier Requirements Manual (European Edition) : Approved By Department Signatory Martin Edwards Quality A 13 TH Sep 2017 Martin Edwards Peter Rhodes Purchasing A 13 TH Sep 2017 Peter
GRMA-032-PRO-00 Page 1 of 8
GRMA-032-PRO-00 Page 1 of 8 GR9100 - Goodrich Quality Requirements for Suppliers Author: Frank Reynolds Issue Date: January 2, 2012 Effective Date: March 2, 2012 1.0 PURPOSE / SCOPE 1.1 This document,
Satellite Aerospace, Inc. TERMS & CONDITIONS Page 1 of 6
TERMS & CONDITIONS Page 1 of 6 1.0 PURPOSE 1.1 Satellite Aerospace, Inc. Quality Requirements to Subtier Sources. 2.0 SCOPE 2.1 This document applies to all purchasing and sales personnel responsible for
REQUEST FOR PROPOSAL WAYFINDING SIGN DESIGN AND FABRICATION FOR THE CITY OF SALIDA, COLORADO
REQUEST FOR PROPOSAL WAYFINDING SIGN DESIGN AND FABRICATION FOR THE CITY OF SALIDA, COLORADO I. INVITATION AND INTENT The City of Salida invites all interested, qualified persons or firms capable of providing
PIP STE05501 Fixed Ladders Design Guide
July 2018 Structural PIP STE05501 Fixed Ladders Design Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared
OWNER USER INTEGRITY MANAGEMENT SYSTEM WRITTEN DESCRIPTION CHECKLIST AB-512(b)
Company Name: Written Description of QMS Title and Rev. Status: Person who is responsible for preparing the owner s QMS written description: Name: Title: Telephone No.: ( ) Fax No.: ( ) Cell No.: ( ) E-Mail:
SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 8 SECTION 083921 PEDESTRIAN FLOOD DOORS AND FRAMES **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your
KOSTER AMERICAN CORPORATION
Section 09699 PART 1 GENERAL Water Vapor Emission Control Systems 1.1 RELATED DOCUMENTS A. Drawings, documents, and general provisions of the Contract, including, but not necessarily limited to, General
SECTION A. Product Data: Manufacturer's data sheets on each product to be used, including:
Page 1 of 8 SECTION 083919 WATERTIGHT DOORS **Note to Specifier** This specification contains component and configuration options. Where indicated, choose the appropriate choice for your specific project
Supplier Quality Requirements Revision B Dated November 21, 2017
Page 1 of 12 1. APPLICABILITY The Supplemental Quality Requirements in this document pertain to ETE designed product purchase orders. Suppliers shall ensure that their employees are aware of: Their contribution
STANDARD QUALITY REQUIREMENTS FOR SUPPLIERS F05-QP008 Rev A Dated 08/12/2010
For questions concerning Standard Quality Requirements for Suppliers (F05-QP008), please contact your APC buyer. 1. SCOPE This document establishes requirements for supplier s quality control systems.