PROPOSED EXTERIOR PROPOSED BLADE SIGN 8959 TYLER BLVD. MENTOR, OHIO PH FAX

Transcription

1 PROPOSED INTERIOR STOREFRONT PROPOSED INTERIOR SIDE ELEVATION S T O R E # A P A C H E M A L L H W Y W E S T # A P A C H E M A L L R O C H E S T E R, M N PROPOSED EXTERIOR PROPOSED BLADE SIGN 8959 TYLER BLVD. MENTOR, OHIO PH. FAX

2 LED ILLUM. CHANNEL LETTERS PROPOSED ELEVATION SHOWN ON FOLLOWING PAGE 10.8 square feet Scale: 3/4 =1-0 INTERIOR STOREFRONT LINEAR - REMOTE /8 COLOR PALETTE /4 Pantone 158 Orange 3M Tangerine Logo & P Pantone 277 Blue Avery 9502-T 4-3/8 #7328 white acrylic Black - Matte finish LOGO FACE: LETTER FACES: TRIMCAP: LED CHANNEL - REMOTE, FLUSH - Generic Install 1/8 #7328 White acrylic w/ surface applied Translucent Orange & Blue vinyl as req d Angle Iron Stringer or Wood Blocking as needed 1/8 #7328 White acrylic 3/4 Black jewelite LOGO & PAYLESS 5 deep.040 alum. RETURNS: Insides pre-painted white; Outsides pre-painted matte black SHOE SOURCE RETURNS: BACKS: Power supply housing 3-1/2 deep.040 alum. Insides pre-painted white; Outsides pre-painted matte black.040 Alum. - Insides pre-painted White Listed disconnect switch MOUNTING: Letters & contour flush mounted to wall surface using appropriate fasteners as required (2) Two sets required; (1) One for Interior Storefront and (1) One for Side Elevation 2 D STU L L WA FOR ALL electric INTERIOR SIGN INSTALLATIONS: 1. UL labels must be positioned on top side of signage or as necessary to keep from line of sight. 2. No drain holes! 3. No visible fasteners! Riv-nut Acrylic face Electronic power supply White Sloan Bendlux Strips as required by manufacturer; remote power supplies Trim cap Toggle bolts* ILLUM. : QUANTITY: Aluminum returns 1/4" - 1/2" Non-corrosive All thread fastener* Aluminum backs LED illumination TE CRE CON ONRY MAS ALL W Greenfield conduit ½" minimum 12 volt jacketed cable Kwik Bolt* Primary electrical source *MOUNTING METHOD: (Use appropriate method following wall inspection) Thru bolt - all thread fasteners w/ wood blocking or angle iron stringer Toggle bolts w/ hollow core- plywood backing Kwik Bolts or Expansion lag bolts & shields w/ solid concrete 2/12/16 Viv added one set for rear interior elevation 03/11/16 AF revised to one set required for interior storefront/added elevation drawing 03/21/16 Changed size and added contour backer 3/24/16 SI Removed contour backer panel APPROVAL

3 PROPOSED INTERIOR ELEVATIONS Scale: 3/16 =1-0 INTERIOR STOREFRONT SURROUND COMPLETED BY OTHERS EQ BLADE SIGN SPECS SHOWN ON FOLLOWING PAGE EQ 10-0 AFF INTERIOR SIDE ELEVATION /2 PANELS TO BE PROVIDED BY OTHERS / /2 03/11/16 03/21/16 Wall panels to be provided by others on side elevation 3/24/16 SI Removed contour backer panel 3 AF APPROVAL

4 RELOCATION OF BLADE SIGN Scale: 1/2 =1-0 3 square feet Existing Conditions For Reference Only TEMP LOCATION NEW LOCATION mounting plate /8 holes for 3/8 lag bolts 5 mounting plate EXISTING BLADE SIGN TO BE REMOVED & INSTALLED AT NEW LOCATION; PATCH AND PAINT AS REQUIRED EXISTING BLADE SIGN AND ARM TO BE REMOVED; PATCH AND PAINT AS REQUIRED /8 PROPOSED BLADE SIGN Approx. Scale: 1/4 = /2 WALL 10-0 AFF COLOR PALETTE Black SW 6635 Determined Orange White ALL PAINT FINISHES TO BE HIGH GLOSS UNLESS OTHERWISE SPECIFIED! JOB SCOPE: Existing blade sign to be removed from temp location and installed 8-6 AFF at new location 10-0 AFF NOT A TRUE REPRESENTATION; SHOWN FOR VISUAL PURPOSES ONLY 03/11/16 AF 03/21/16 revised to 10ft aff per elevation drawings Deleted page 6 4 APPROVAL

5 LED ILLUM. REVERSE HALO-LIT LETTERS 96.8 square feet Scale: 3/8 =1-0 SITE SURVEY REQUIRED PRIOR TO FINAL PRODUCTION TO CONFIRM ALL SIZES! EXTERIOR ELEVATION ELECTRICAL ELECTRICAL ACCESS TO BE CONFIRMED TO ENSURE REMOTE POWER SUPPLIES ARE POSSIBLE! / /4 Logo & P /8 Stand off w/ spacers to allow for halo lighting Angle Iron Stringer or Wood Blocking as needed LOGO FACE:.090 alum. painted to match orange and blue shown LETTER FACES:.090 alum. faces painted white Aluminum returns 1/4" - 1/2" Non-corrosive All thread fastener thru-bolt Riv-nut D STU LL WA RETURNS: 3 deep.063 alum. welded to faces - painted to match faces BACKS: 1/4 clear polycarbonate ILLUMINATION: Sloan VL Plus White Short Modules as required by manufacturer Remote power supplies - to be confirmed Pantone 158 Orange MOUNTING: 1-1/2 stand off from wall with spacers to be provided & painted to match the wall Pantone 277 Blue QUANTITY: (1) one set required for exterior elevation COLOR PALETTE Electronic power supply within housing SEALTITE liquid tight fittings with PVC pipe Flexible Greenfield ½" minimum Listed disconnect switch Aluminum face Clear polycarbonate back 12 volt jacketed cable TE CRE CON SONRY A M ALL W LED illumination Aluminum clip Primary electrical source Weep holes 1/4 dia. White WALL COLOR: TBV PROPOSED ELEVATION SHOWN ON FOLLOWING PAGE REVERSE, HALO LIT CHANNEL REMOTE - GENERIC INSTALL NOT TO SCALE 5 APPROVAL

6 PROPOSED EXTERIOR Approx. Scale: 1/16 =1-0 Existing Conditions For Reference Only EXTERIOR ELEVATION 56'-0" WIDTH OF WALL CENTER ON EXISTING WALL 25-0" HEIGHT 15-6" ABOVE GRADE 6'-0" 6 APPROVAL