RemScan TM SCOPE OF WORK. Rapid Measurement of Petroleum Hydrocarbons in Soil S /16

Transcription

1 RemScan TM Rapid Measurement of Petroleum Hydrocarbons in Soil SCOPE OF WORK S /16

2 Initial Scope of Supply The RemScan is sold as a complete kit of equipment with initial site specific calibration and on-site training. The scope of work includes: Category Item Qty Equipment RemScan Unit 1 Pelican Case 63 x 52 x 35cm Includes inserts for all parts and accessories 1 Operation Manual 2 Quick Start Guide 2 Sample cups 10 Soil Tamper (one spare) 2 Complete with all accessories required Calibtration Training Service Agreement Calibration for one site (either on-site or at Ziltek - see separate document titled Z026 - RemScan - Technical Note 3 - Site Calibration Options for more details) Training - On-site training for up to 10 people 1 year service agreement - Premium level (see separate document titled Z035 - RemScan - Service Agreement Benefits for more details) 1 1 year (ongoing) TOTAL (FCA, Adelaide South Australia) 2

3 Optional Extras The following items are not an essential part of the RemScan equipment. These items may be purchased to enhance RemScan operation for particular applications: Category Description Image Backpack Drying Unit This is used to transport RemScan around the field and enables operator to carry RemScan around a large site. It has cut-outs for all equipment that may be required in the field like: Spare battery Tamper Standards Sample Cups Used for rapid in-field drying of samples when an on-site hut is not available for drying samples. Comes complete with all accessories required including: Spare battery Battery charger 12V Cable 2 sets of 7 drying trays (dries 35 samples at a time) Clamp Carry strap Sample drying cradles are used in the drying unit and are required for mounting the samples during the drying process. Each sample drying cradle contains 5 spots for measurement of 5 replicate sub-samples of each sample. Although the sample drying cradles could be re-used, they are not normally reused due to possibility of cross contamination. Sample Drying Cradles (sold in pack of 100 units). 3

4 Optional Extras The following items are not an essential part of the RemScan equipment. These items may be purchased to enhance RemScan operation for particular applications: Category Description Image Lab Stand The lab stand is useful if either: Many samples are to be measured in a site hut (as opposed to in the field). This may be because the soil samples are very wet and need air drying in the hut or because conditions are too inhospitable in the field (too hot or too cold) for personnel to work for long periods If the RemScan is going to be recalibrated for many different soil types. There are three models of Lab Stand: Lab Stand - Compressed Air This is the most convenient unit to use in a laboratory environment however it requires a supply of compressed air to operate the sample presentation RAM. Dimensions: H37 x W31 x D31 cm Enclosed Lab Stand - Compressed Air/Manual Pump Can be used in any application and is more compact than the Lab Stand. It has the option of using either compressed air or a manual pump. Dimensions: H28 x W42 x D30 cm Portable Lab Stand - Spring Operated Can be used in any application and is the most portable due to it s small size. The sample presentation RAM is spring loaded, no compressed air or manual pump required. Dimensions: H19.5 x W22 x D23 cm 4

5 Additional Post Sale Services Category Service Agreement Training (additional) Calibration (additional) Annual Service Agreement Item Ziltek strongly recommends that the customer takes out an annual service contract for each of the RemScans. Ziltek offers several levels of service and these are described in the separate document titled: Z035 - RemScan - Service Agreement Benefits If the customer wishes to train a new lot of personnel in the operation and use of RemScan, Ziltek offers additional training sessions for the customer s personnel. These can either be provided on-site or at Ziltek s facility in Adelaide, South Australia. RemScan is normally supplied with a calibration to suit the main soil type at a particular site. If there are multiple very different soil types at a site or if RemScan is moved to another site, it is necessary to calibrate RemScan for each of the new major soil types. There are several ways in which calibration can be performed and this depends on a number of different factors. 5

6 Spare Parts No particular part of RemScan is subject to wear so spare parts are only offered in case a component wears out or the client looses a critical part. The following items are offered: Part No ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN ZRSN Item RemScan Battery (Lithium Ion) PDA Operator Interface PDA USB Cable PDA Stylus Micro SD Memory Card with adapter Shoulder Strap Background Cap Reference Cap Nose Cone Background and Reference Cap Holder PDA Cradle PDA Power Supply Unit with Power Cable PDA Power Supply Unit Power Adapter PDA Clamp Sample Tamper Sample Cup Battery Charger Dock Battery Charger Power Supply Unit Power Cable Battery Charger Power Supply Unit RemScan USB and Power Supply Y Cable RemScan Power Supply Unit RemScan Power Supply Unit Cable RemScan USB Extension Cable for Y Cable PDA Battery Riffle Splitter 6

7 CONTACT US T +61 (0) F +61 (0) E info@ziltek.com Physical Address Postal Address BioSA Incubator PO Box West Thebarton Road Kent Town SA 5071 Thebarton SA 5031 Australia Australia