governors Line Pressure Regulators
|
|
|
- Jonas Bishop
- 6 years ago
- Views:
Transcription
1 governors Line Pressure Regulators
2 Regulators governors GOVERNOR Line Pressure Regulators Introduction Pietro Fiorentini s GOVERNOR line of gas regulators are designed to comply with the latest CSA and international standards for regulators suitable for indoor and outdoor installations with no modifications. The GOVERNOR family of regulators are ideal for a wide range of residential through large industrial applications. The materials and soft parts used in the construction of the GOVERNOR regulators make them suitable for use with natural gas, LPG, Propane air and all other non-corrosive gases. All the GOVERNOR regulators are equipped with balanced valve design for high outlet pressure accuracy regardless of any Inlet pressure variation. The double diaphragm and integral vent limiter provides added security in case of primary diaphragm failure. The external vent limiter eliminates the need for costly piping for indoor installations and complies with CSA guidelines.* The number of regulator options sometimes eliminates the need for separate units and significantly reduces installation costs. Safe, Reliable and High Performance Internal vent limiter: non removable, for indoor and outdoor installations. External vent limiter for indoor installations.* Double diaphragm for added safety and greater reliability of service. Balanced valve design gives you for increase capacity, high 500 to 1 turndown and stable regulation from low to high flow. Complete lockup in absence of gas flow, bubble tight shutoff. *As Approved by Local Codes and Standards single model Inlet Pressure Range: 25 W.C. to 2 PSIG Over Pressure Device (OPD) Model Inlet Pressure Range: 25 W.C. to 5 PSIG Slam Shut Model Inlet Pressure Range: 25 W.C. to 5 PSIG
3 GOVERNOR Standard Model Standard Model Inlet Pressure Range: 25 W.C. to 2 PSIG Main Features CSA 6.22a-2005 ANSI Z21.80A2005 Class I for outlet pressures up to 14 W.C. Certified Integral Vent Limiter External Vent Limiter no vent line required* Positive dead-end lockup Inlet and Outlet test ports 500 to 1 Turndown Minimum Δ P 1 W.C. Specifications Suitable for use with Natural Gas, LPG, and any non corrosive clean gas Inlet pressure: 3 W.C. to 2 PSIG Outlet pressure: 2 W.C. to 14 W.C. Temperature range: -40F to 150F Connections: ½ thru 4 Maximum Emergency Inlet Exposure Pressure: 80 PSIG Suitable for Indoor or Outdoor Installation *As Approved by Local Codes and Standards Standard Outlet Spring Range Green 2 W.C. to 5.1 W.C. Red 2.75 W.C. to 7.87 W.C. White 4 W.C. to 11.8 W.C. Black 6 W.C. to 14 W.C.
4 GOVERNOR Line Pressure Regulators Governor Capacity in CFH for.60 Specific Gravity Gas Outlet Pressure Set Point Operating Inlet Pressure 1 PSIG 2 PSIG ½ ¾ ½ ¾ ¼ ½ /F /F 4 8 W.C W.C W.C , W.C ,155 8 W.C. 1,059 1, W.C. 1,093 1,501 8 W.C. 1,695 2, W.C. 1,471 2,213 8 W.C. 2,084 2, W.C. 1,858 2,796 8 W.C. 2,437 3, W.C. 2,206 3,320 8 W.C. 5,297 7, W.C. 5,264 7,891 8 W.C. 5,650 8, W.C. 5,496 8,270 8 W.C. 10,947 15, W.C. 10,064 15,143 8 W.C. 16,810 23, W.C. 15,715 23,308 8 W.C. 29,452 40, W.C. 27,545 40,753
5 GOVERNOR Over Pressure Device (OPD) Model Over Pressure Device (OPD) Model Inlet Pressure Range: 25 W.C. to 5 PSIG Main Features CSA Certified to ANSI Z21.80A2005 CSA 6.22a-2005 Class I for outlet pressures up to 14 W.C. CSA 6.22a-2005 Class II for outlet pressures up to 1 PSIG Integral Vent Limiter External Vent Limiter no vent line required* Positive dead-end lockup Inlet and Outlet test ports 500 to 1 Turndown Specifications Suitable for use with Natural Gas, LPG, and any non corrosive clean gas Inlet pressure: 7 W.C. to 5 PSIG OPD Outlet Spring Range Temperature range: -40F to 150F Green 2 W.C. to 5.1 W.C. Connections: ½ thru 2 Red 2.75 W.C. to 7.87 W.C. Maximum Emergency Inlet Exposure Pressure: 80 PSIG White 4 W.C. to 11.8 W.C. Suitable for Indoor or Outdoor Installation Black 6 W.C. to 14 W.C. *As Approved by Local Codes and Standards Yellow 9.8 W.C. to 1 PSIG
6 GOVERNOR Over Pressure Device (OPD) Model GOVERNOR LINE PRESSURE REGULATOR WITH OVER PRESSURE DEVICE (OPD) Capacity in CFH for.60 Specific Gravity Gas 30051DC ½ DC ¾ 30053DC DC ½ 30151DC ¾ 30152DC DC 1 ¼ 30154DC 1 ½ 30155DC DC DC 4 Outlet Pressure Set Point Operating Inlet Pressure 1 PSIG 2 PSIG 5 PSIG 8 W.C W.C W.C W.C ,115 1, W.C ,155 1, W.C ,170 1,170 8 W.C. 1,059 1,501 1, W.C. 1,093 1,501 1, W.C ,521 1,521 8 W.C. 1,695 2,205 2, W.C. 1,471 2,213 2, W.C. 1,325 2,223 2,223 8 W.C. 2,084 2,785 2, W.C. 1,858 2,796 2, W.C. 1,674 2,808 2,808 8 W.C. 2,437 3,308 3, W.C. 2,206 3,320 3, W.C. 1,988 3,335 3,335 8 W.C. 5,297 7,891 7, W.C. 5,264 7,921 7, W.C. 4,743 7,957 7,957 8 W.C. 5,650 8,240 8, W.C. 5,496 8,270 8, W.C. 4,952 8,308 8,308 8 W.C. 19,947 15,087 15, W.C. 10,064 15,143 15, W.C. 9,068 15,213 15,213 8 W.C. 16,810 23,202 23, W.C. 15,715 23,308 23, W.C. 13,768 23,406 23,406 8 W.C. 29, , , W.C. 27, , , W.C. 24, , , 960
7 GOVERNOR Standard Model - Dimension DIMENSIONS (in inches) Model # Size A B C D E F /2 NPT /4 NPT NPT w/filter w/filter w/filter Weight (Lbs) 1/ / /2 NPT / /4 NPT / NPT /4 NPT / /2 NPT / NPT /F 3 FLANGED ANSI /F 4 FLANGED ANSI GOVERNOR Over Pressure Device (OPD) Model - Dimension DIMENSIONS (in Inches) Model # Size A B C D E F /2 NPT / /4 NPT / NPT /2 NPT / /4 NPT / NPT /4 NPT / /2 NPT / NPT /F 3 FLANGED ANSI /F 4 FLANGED ANSI Weight (Lbs)
8 Residential and Commercial Applications Dival 500 Filters Norval Pietro Fiorentini USA PO Box 728 Norcross, GA Fax: Toll-free: The data enclosed is not binding. We reserve the right to make eventual changes without prior notice. CT-s581-US January 2011
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
Model and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
vapor control systems Quality, Dependability, Service. Reputation Built on Valve Concepts, Inc. com A Cashco, Inc.
vapor control A Cashco, Inc. Company systems Reputation Built on Quality, Dependability, Service. Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you
Cash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
ANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
www.polyvalveusa.com 1 Why use Polyvalve Poly-Gas Valves? Polyvalve Poly-Gas valves are everything you d expect from the company that invented polyethylene valves. Millions of Polyvalve Poly-Gas valves
A. Codes and Standards that are Standard at the University: 1. AGA Compliance: LC 1-91 Interior Fuel Gas Piping Systems
PART 1: GENERAL 1.01 Purpose: This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
Multiphase Flow Measurement. Multiphase Flow Meter Wet Gas Meter Multiphase Wet Gas Flow Meter Well Testing Service
Multiphase Flow Measurement Multiphase Flow Meter Wet Gas Meter Multiphase Wet Gas Flow Meter Well Testing Service Multiphase Flow Meter Technology The Pietro Fiorentini Multiphase and Wet Gas Flow Meters
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
Module 8 Its Not Just About the Meter and Regulator
Station Types Point of Delivery (POD) Point of Receipt (POR) Industrial Commercial Residential OGA 2015 Regulator Fundamentals Seminar 2 Station Design Information Upstream pipeline MAOP Inlet pressure
Casing Gas Recovery Unit
Standard Features RotorComp NK60 Twin Screw Compressor 25 HP Hydraulic Or Electric Motor 8 x 48 Inlet Scrubber c/w Double Diaphragm Pump 2-4 x 42 Activated Alumina Regenerative Drying Vessels Oil/Gas Discharge
OPTIMA SLS. Ultra Low Emissions Burner
OPTIMA SLS Ultra Low Emissions Burner 1-1.9-1 E-i - 04/16 Extremely clean, reliable heat with ultra low NO x and CO production for ease of air permitting and environmental compliance Large capacity heat
RPM Rotary Gas Meters
RPM Rotary Gas Meters 02 Elster American Meter RPM Rotary Gas Meters Elster American Meter s RPM rotary meters are a positive displacement meter used to measure natural gas and other various non-corrosive
pressure regulators Back Pressure Regulators
Back Pressure Regulators Index Safety Warning Inside Front Cover BP-3 Series 1 BP-6 Series 4 BP-8 Series 7 BP-8LF Series 10 CBP-3 Series 13 LB-1 Series 16 SBPR Series 19 BP-60 Series 22 BP-66 Series 25
TDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.
Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2
C. Up to Two and One-half (2-1/2) inches: Full port, 2-piece, bronze body ball valves with teflon seat conforming to MSS SP-110.
SECTION 220000 PLUMBING SYSTEMS 1.0 Valves A. ASME compliance: 1. ASME B1.20.1 2. ASME B16.1 3. ASME B16.10 4. ASME B16.34 5. ASME B16.18 6. ASME B31.9 B. All branch mains shall be provided with shutoff
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
recycle water reuse it save up to from showers & baths for flushing toilets 30% of water use
Residential recycle - Water reuse Recovery - save recycle water from showers & baths reuse it for flushing toilets save up to 30% of water use www.recoverwater.com How it works Greywater is lightly soiled
94130 Pressure Relief Vent (Open or Closed Vent Option) Features
94130 (Open or Closed Vent Option) The Shand & Jurs 94130 is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
BURNERS EXCESS AIR SINGLE TUNNEL COOL FLAME
MODEL: 3502-XNM Revision: 0 DESCRIPTION The XNM Series Excess Air Burners are intermediate flame length, nozzle mixing types designed for 800% excess air. A unique design and stepped tunnel burner blocks
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
CRYOGENIC FLUIDS CHAPTER 32
CHAPTER 32 CRYOGENIC FLUIDS SECTION 3201 GENERAL 3201.1 Scope. Storage, use and handling of cryogenic fluids shall comply with this chapter. Cryogenic fluids classified as hazardous materials shall also
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
CONA -Universal ANSI / CONA -Connector ANSI
CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
Essex County College - West Essex Campus Addition And Renovations Dib # / SECTION DOMESTIC WATER PIPING SPECIALTIES
Essex County College - West Essex Campus Addition And Renovations Dib # 54292 / 11-14 SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
Threaded Swing Check Valves
ISO 9001:2000 Certifi ed Certifi cate No. C2007-01814 Carbon Steel - Ductile Iron Swing Check Valve manufactured in compliance with: ASME B3.1 Pipe Threads Limited Compliance to: ASME B&PVC Sections 2
VENTURI FLOWMETERS. Your First Choice in Intelligent Flow Management...
VENTURI FLOWMETERS Your First Choice in Intelligent Flow Management... VENTURI FLOWMETERS Preso s complete line of Venturis offer reduced operating costs, proven accuracy, and great rangeability. Low permanent
Autogas Series. Regenerative Turbine Coro-Flo Pumps For High Differential Pressure Applications Using LPG and Other Liquefied Gases.
Autogas Series Regenerative Turbine Coro-Flo Pumps For High Differential Pressure Applications Using LPG and Other Liquefied Gases motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10
DFT Valves. In Line Check Valves. REQUEST A QUOTE SCHEDULE SERVICES
DFT Valves In Line Check Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM The Check Valve Doctor DFT in-line check valves began over 60 years ago with a customer
Proven Flow Measurement Solutions for the Oil and Gas Industry
Proven Flow Measurement Solutions for the Oil and Gas Industry For The Real World., Berkshire, RG6 4UT. UK. 1 The V-Cone flow meter is an advanced technology that takes differential pressure flow measurement
APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS
BULLETIN 9000.00-2 SEPTEMBER 2015 APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS Materials of Construction DUCTILE IRON BODY Item Description Material A1 Body Ductile Iron, ASTM A536 A2
LIQUID-SPECIFIC PRODUCT LINE: ABRASIVE LIQUID PUMPS SERIES DESCRIPTION OPERATING RANGE: IMPROVEMENTS NOMINAL FLOW RATES:
SERIES 4624B (Cast Iron - Replaces Series 4625 Models) Page 410.1 Issue K SERIES DESCRIPTION The Abrasive Liquid Series heavy duty internal gear pumps utilize hard parts in key wear areas, combined with
pressure regulators Single Stage Pressure Regulators Safety Warning Inside Front Cover Index
Index Single Stage Pressure Regulators Safety Warning Inside Front Cover GO Regulator PO Box 4866 Spartanburg, SC 29305-4866 (864) 574-7966 www.goreg.com sales-go@circor.com IFC PR-1 Series 1 PR-2 Series
STANDARDS FOR CUSTOMER SERVICE LINES, METERS, AND SERVICE REGULATORS
Columbia Gas of Pennsylvania A NiSource Company STANDARDS FOR CUSTOMER SERVICE LINES, METERS, AND SERVICE REGULATORS (Plumber s Guide) Form C 2235(PA) (03-14) p. i PREFACE The information included in this
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
Synthetic Natural Gas (SNG), The LPG Opportunity
Synthetic Natural Gas (SNG), The LPG Opportunity SNG Overview Introduction to fuel interchangeability Components required for an SNG system Applications for SNG General comments regarding SNG Fuel Interchangeability
Installation of CSST Gas Piping Systems
(What Inspectors Need To Know) May 2016 Conventional Arc-Resistant CSST Product Standard National Standard ANSI LC-1 Performance-based standard Listed system installed in accordance with manufacturer s
8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.
SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional
CONDENSING BOILER TECHNOLOGY
FCR-4 CONDENSING BOILER TECHNOLOGY Bringing firetube hydronic boilers and control technologies to unprecendented levels of performance. FlexCore Symmetrical Firetube boilers bring hydronic heating products
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
User s Guide IP610 SERIES. I/P Converters. Shop online at. omega.com For latest product manuals: omegamanual.
User s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info IP610 SERIES I/P Converters OMEGAnet Online Service www.omega.com Internet e-mail info@omega.com
VERIS Accelabar. Superior Flow Measurement Accuracy
VERIS Superior Flow Measurement Accuracy Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. ...A New Idea in Flow
Swirl flowmeter FS4000 Compact, reliable and robust
Measurement made easy Swirl flowmeter FS4000 Compact, reliable and robust Simply fi ts your purpose The most important data at a glance Accuracy for liquids ± 0.5% of rate Accuracy for gases and steam
Propane Catalog. Regulators Meters. v. 9, Mar 2014
Propane Catalog Regulators Meters Accessories v. 9, Mar 2014 2 3 DOMESTIC HIGH PRESSURE REGULATORS (POUNDS TO POUNDS) Compact First Stage Regulator - Domestic First stage regulator in two stage systems
DOMESTIC GAS REGULATORS
CNG & CITY GAS DISTRIBUTION PROJECT FOR BID DOCUMENT FOR DOMESTIC GAS REGULATORS UNDER DOMESTIC COMPETITIVE BIDDING Bid Document No.: TNGCL/C&P/P(101)/PRV/2013-14 Dated 06/06/2013 VOLUME II OF II PREPARED
VALVES. Prospector Series Poppet Valves 1/4" to 2" Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves
2 High flow - Cv of 1.2 to 49.5 Durable, robust construction Two mounting styles: inline or subbase 1/4" to 2" ports (SPP or PTF threads) Wide range of ir Pilot Operators available Four functional types:
Sanitary Sewer Extensions, Lift Stations, and Force Mains Engineering Report Form. I. General Information. 1. Name of Facility:
Oklahoma Department of Environmental Quality Water Quality Division Phone: 405-702-8100 Construction Permitting Section 707 N. Robinson, OKC, OK 73102-6010 P.O. Box 1677, OKC, OK 73101-1677 Sanitary Sewer
Basket Strainers. Threaded. Basket. Strainers. Flanged Basket. Strainers
Basket Basket feature top removal of the screen. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal.
Downsizing a Claus Sulfur Recovery Unit
INFRASTRUCTURE MINING & METALS NUCLEAR, SECURITY & ENVIRONMENTAL Downsizing a Claus Sulfur Recovery Unit OIL, GAS & CHEMICALS By Charles L. Kimtantas and Martin A. Taylor ckimtant@bechtel.com & mataylo1@bechtel.com
NATURAL GAS SAFETY WHAT TO DO IN AN EMERGENCY
NATURAL GAS SAFETY WHAT TO DO IN AN EMERGENCY Responding to Natural Gas Leaks Knowing how to recognize, react and report natural gas emergencies can help keep you safe. 1. RECOGNIZE: Signs of a natural
Rolairtrol Air Separator For Hot and Chilled Water Systems
REMOVES ENTRAINED AIR To protect the system against damage To eliminate system noise TANGENTIAL FLOW PATTERN Increases air separation efficiency Allows use of smaller sizes than required with straight
ball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
0.01 Micron Membrane Filters
Balston Natural Gas Filters Specialty Gas Filtration Analytical Gas Filtration Process Gas Filtration Critical Blow Off Applications 0.01 Micron Membrane Filters Filtration to 0.01 micron No particle shedding
Model B. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
North American Combustion Burners
Combustion North American Combustion Burners 4485 Tempest SE Gas Burner Low NOx - DMC Mode capable to achieve Ultra Low NOx emissions NPT or BSP air/gas inlets, adjustable in 90 increaments Low air pressure
Compressed Air Filters Sample Filters
Compressed Air Compressed Air Sample Balston Sample Protect Sensitive Analyzers Balston Gas and Liquid Sample Analyzer protect analyzers from sample impurities by removing solids and liquids from gases
VIKING BOLTED-LID BASKET-TYPE LINE STRAINERS
Page 642.1 LOW PRESSURE DROP EASY TO CLEAN LIGHT IN WEIGHT SMALL IN OVERALL DIMENSION VIKING QUALITY DUCTILE CONSTRUCTION Series Description Viking Bolted-Lid Simplex Strainers provide protection for your
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
2 Through 10 Line Size Filters Model AKC-0280 Model AKC-0880 Balston Natural Gas Filters Balston Compressed Gas Filters Balston high flow rate compres
Pressure rating to 1440 psig Meets U.S. and Canadian codes for natural gas filters Flow rates to 183 million standard cubic feet per day High efficiency removal of suspended liquid and solid impurities
LESER at a glance. The-Safety-Valve.com
LESER at a glance The-Safety-Valve.com Products at a glance API Series 526 Oil and gas Refineries Chemical industry Petrochemical industry Valve sizes 1" through 8", Orifice D through T Materials: WCB,
CHEMICAL INJECTION METHODS Pros & Cons
CHEMICAL INJECTION METHODS Pros & Cons 1 Chemical injection is an integral component of any pipeline integrity program. The petroleum, chemical, and water treatment industries require chemical treatments
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
SPECIFICATIONS - DETAILED PROVISIONS Section Chlorination System (On-site Sodium Hypochlorite Generation System) C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11241 - Chlorination System (On-site Sodium Hypochlorite Generation System) C O N T E N T S PART 1 - GENERAL... 1 1.01 Scope... 1 1.02 Scope of Work... 1 1.03
Gilflo flowmeters. for steam, liquids and gases
Gilflo flowmeters for steam, liquids and gases The Gilflo spring loaded variable area flowmeter... offers an unrivalled 1:1 turndown and can be used to meter most industrial fluids including steam and
High Pressure Filter Assemblies
High Pressure Filter Assemblies Up to 20,000 PSI (1378 bar) All stainless steel construction Stainless steel metal felt filter elements High Pressure T-Type Filter Assemblies Greater service life than
Target Inline Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
MODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
Del-Monox Breathing Air Purifiers DM Series
Del-Monox Breathing Air Purifiers DM Series Del-Monox Breathing Air Purifiers Time-Proven Reliability In 1966, Deltech introduced the industry s first engineered, contaminant removing system to convert
5000 SERIES SHORT PATTERN BALL VALVE
5000 SERIES SHORT PATTERN BALL VALVE Short Pattern Valve for industrial and process applications. Design Pressure Rating 150# Through 2500# Valve Size 1/2 to 12 150# to 300# 1/2 to 10 600# 1/2 to 8 900#
Read Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED
Chapter 17 Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.1.1 Applicability The regulations in this chapter apply to any private potable water supply system where plumbing fixtures are
PROPANE EDUCATION & RESEARCH COUNCIL
PROPANE EDUCATION & RESEARCH COUNCIL Request for Proposals for Testing and Evaluation of Pressure Relief Valves on Propane Transport Vehicles, Bulk Tanks, and Customer Tanks September 14, 2007 General
Exterior Cryogenic Fluid Vessels
Orange County Fire Authority Community Risk Reduction 1 Fire Authority Road, Building A, Irvine, CA. 92602 www.ocfa.org 714-573-6100 Exterior Cryogenic Fluid Vessels Guideline G-13 Serving the Cities of
High Precision Gauge Pressure Indicators
Series 300 2¾" Dial High Precision Gauge Pressure Indicators For test, laboratory, and production uses, this gauge gives accuracy in a compact size. It is sensitive, yet rugged and low in cost. Available
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
Submittal for Aquatherm Piping System
Submittal for Aquatherm Piping System Project Name: Project Location: Date: To whom it may concern, We are proposing to upgrade the piping parts on the above project to the polypropylene Aquatherm Green
Process Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
VAREC SERIES 2010B/2020B/3500B PRESSURE AND VACUUM RELIEF VALVE INSTRUCTION, OPERATION AND MAINTENANCE MANUAL
Before installation these instructions must be fully read and understood 2010B 3500B 2020B The VAREC Vapor Control Inc. 2010B/2020B/3500B Series pressure and/or vacuum relief valves have not been tested
INDUSTRIAL PIPE FITTINGS, LLC
Page 1 of 9 SPIROLITE MUNICIPAL AND INDUSTRIAL ODOR CONTROL PIPING Municipal wastewater treatment plants, industrial processes and composting facilities can be assured of trouble free transport of foul
Optimize chemical injection systems with robust flow control
Optimize chemical injection systems with robust flow control TESCOM 56 Series Chemical Injection Flow Control Valve Continuous and responsive control You are facing infrastructure failure and shutting
OPTIMASS 7400 Technical Datasheet
OPTIMASS 7400 Technical Datasheet Sensor for mass flow The optimum meter for demanding applications A single straight measuring tube Choice of 4 tube materials The documentation is only complete when used
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
* * * * (317) N
Protect-Air When SAFETY matters most! Lifesaving products for compressed air. a brand of tri-matic ToolReg * CartReg * FluidReg * HoseGuard * SaveAir (317) 335-2602 8250 N 600 West McCordsville, Indiana
Part Numbers. Kinetico Drinking Water Systems. Revised: 07/2016 Drinking Water Systems Parts Pages Section 7 Page 1
Part Numbers Kinetico Drinking Water Systems Revised: 07/2016 Drinking Water Systems Parts Pages Section 7 Page 1 Model 7000/7500 Components 4 7A 1 8 7B 2 5A 3 5B 6A 6B Dwg. No. Description Part No. 1
BuildingName The Description of the Project P DOCUMENTS
ARCHITECTURE, ENGINEERING AND CONSTRUCTION P00000000 0000 DOCUMENTS ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION
Benchmark Platinum. High-Efficiency Boilers. AERCO.com
Benchmark Platinum High-Efficiency Boilers AERCO.com Heat Smarter with Benchmark Platinum In an ideal world, high efficiency, commercial condensing boilers would operate as designed condensing as you expect
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,