94130 Pressure Relief Vent (Open or Closed Vent Option) Features
|
|
|
- Helena Kennedy
- 6 years ago
- Views:
Transcription
1 94130 (Open or Closed Vent Option) The Shand & Jurs is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and light weight construction reduces maintenance and installation costs. A variety of construction materials are available as part of the standard design which are ideally suited for highly corrosive and toxic product applications. For dependable performance, Shand & Jurs s utilize pressure pallets that are both peripherally and center stem guided. The standard diaphragm is Air Cushion Seated and constructed of teflon for high resistance to adhesion of ice and gum formation. A range of sizes and configurations, such as closed vent hood and flame snuffers are available. Standard pressure setting is 0.5 oz/in 2. Expanda-Seal Shand & Jurs Expanda-Seal option is available on all pressure pallet assemblies. This feature significantly reduces leakage. The ballooning effect of the Teflon diaphragm effectively seals the valve. The Expanda-Seal feature ensures less than 0.5 SCFH of air at 95% of the set point. Pressure Below Set Point Approaching Set Point Set Point Exceeded Open Vent Configuration Features Closed Vent Configuration Reduced need for special materials in corrosive and extreme temperature Peripheral and stem guided pressure pallet assures smooth lift and closure Positive seal and minimal blow down Capacity certified to API standards Reduced maintenance and installation costs All Weather Teflon coating available Insulation Jackets available Steam Jackets available 1
2 Specifications Sizes: 2, 3, 4, 6, 8, 10 & 12 *Maximum Setting: 24 oz/in 2 Standard Setting: 0.5 oz/in 2 (0.86 in. W.C.) Expanda-Seal Pressure Setting: 1.5 oz/in 2 Minimum (Consult Factory for lower settings) Materials of Construction Body: Cast Aluminum, Cast Steel, Cast Iron, Ductile Iron or 316 Stainless Steel Closed Vent Cover: Aluminum, Steel or Stainless Steel Pallet: Aluminum or Stainless Steel Seat: Aluminum or Stainless Steel (Field Replaceable) Stem & Guide Posts: Aluminum, Galvanized Steel, Galvanized Iron or Stainless Steel Temperature Range: Body and Seal Options for Process Temperature Ranges from -300 O F to 500 O F Raised face (except Aluminum) or flat face flange available; compatible with ANSI 125/150 Ib. EN and JIS 10K flanges available. * Varied by valve size and weight material. Please consult factory for particular valve size and weight material. Screen: Galvanized Steel or Stainless Steel Diaphragm: FEP Teflon, PTFE, Viton, Buna N Back-up Disc: N-8090 Fiber, Glass Filled Teflon (GPTFE) Closed Vent Cover Gasket: N-8090 Fiber, Glass Filled Teflon (GPTFE), Viton, Buna N * Table D Option 5 for same size inlet and outlet connections has been Obsoleted and Replaced by Table D Option 6. Option 5 and 6 dimensions do not match. Consult factory if replacement valve is required. Standard Materials of Construction Open Vent Hood Seat Stem Guide Tube Side Guides Service Body 2, 3, 4, 6 & 8 10 & 12 2, 3, 4 6, 8, 10 & 12 Pallets Screen Norm. Alum. Cast Alum SS Alum. Alum. Alum. Alum. Galv. Steel Galv. Steel 316 SS Cyro Low Temp. Cast Alum. Alum. Alum. Alum. Alum. Alum. 316SS 304 SS 316 SS Severe Iron CI/DI 18-8 SS Alum. 316 SS 316 SS 316 SS Galv. Steel 304 SS 316 SS Severe Steel Cast Steel 18-8 SS Alum. 316 SS 316 SS 316 SS Galv. Steel 304 SS 316 SS Severe 316SS Cast 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS Service Pallet Stem Pressure Side Diaphragm Closed Vent Cover Cover 2, 3, 4 6, 8, 10 & 12 Gaskets Hardware Norm. Alum. 316 SS FEP Aluminum Aluminum N-8090 Stainless Steel Cyro Low Temp. 316 SS FEP Aluminum Aluminum N SS Severe Iron 316 SS FEP Steel Steel N SS Severe Steel 316 SS FEP Steel Steel N-8090 Stainless Steel Severe 316 SS 316 SS FEP 316 SS 316 SS N SS N-8090 = Nitrile Fiber Composition FEP = Teflon CI = Cast Iron DI = Ductile Iron 2
3 94130 Closed Vent Vent Size F H L 2 x /4 5 1/32 4 1/4 2 x /8 5 1/32 4 1/4 3 x /4 5 9/16 5 1/4 3 x /4 5 31/32 5 1/4 4 x / /2 4 x /4 7 1/ /16 6 x /4 9 3/8 8 3/8 6 x / /32 8 1/4 8 x / /16 9 3/4 8 x / /32 9 3/4 10 x / /32 10 x / / /32 12 x /8 16 1/ /16 12 x /8 16 7/ /16 All designs subject to change. Certified dimensions and specifications available upon request Open Vent Vent Size D Diameter E /8 12 7/ /4 13 9/ / / /4 18 5/ /4 18 5/ /8 25 9/ /4 29 7/8 lb lb All designs subject to change. Certified dimensions and specifications available upon request. 3
4 Ordering Guide Model Number Selection The model number will consist of a base number followed by 8 digit numbers. These digits will represent 6 option tables. Ordering Information Specify: AB - CD - EF - GH 1. Model Size and Body Material 3. Type of Venting A) Open Vent B) Closed Vent 4. Pressure Setting Required 5. Cleaning for Oxygen Service or Other Special Cleaning 6. Optional Materials of Construction, If Required 7. To Specify CE for Ordinary EU Locations use 94130C AB CD EF GH 8. To Specify ATEX Certification for Group IIB, IIA EU Locations use 94130A AB CD EF GH. ATEX Certification Includes CE Mark. Table AB - Size and Material Option AB Size Body Material 12 2 Aluminum 22 2 Aluminum w/ Cryo Hood 32, 72 2 Cast Iron, Ductile Iron Stainless Steel 52 2 Steel 14 3 Aluminum 24 3 Aluminum w/ Cryo Hood 34, 74 3 Cast Iron, Ductile Iron Stainless Steel 54 3 Steel 15 4 Low Copper Cast Alum Aluminum w/ Cryo Hood 35, 75 4 Cast Iron, Ductile Iron Stainless Steel 55 4 Steel 16 6 Aluminum 26 6 Aluminum w/ Cryo Hood 36, 76 6 Cast Iron, Ductile Iron Option AB Size Body Material Stainless Steel 56 6 Steel 17 8 Aluminum 27 8 Aluminum w/ Cryo Hood 37, 77 8 Cast Iron, Ductile Iron Stainless Steel 57 8 Steel Aluminum Aluminum w/ Cryo Hood 38, Cast Iron, Ductile Iron Stainless Steel Steel Aluminum Aluminum w/ Cryo Hood 39, Cast Iron, Ductile Iron Stainless Steel Steel 4
5 Table C - Flange Type Option C * RF not available in ALUM Flange Type 0 ANSI 125/150lb. FF 1 ANSI 125/150lb. RF* 2 EN PN16 FF 3 EN PN16 RF* 4 JIS 10K FF 5 JIS 10K RF* Table D - Vent Type Open Vent Option Option E Closed Vent Option 1 3, 6 3 = Standard; Outlet > Inlet (Outlet is one size larger than Inlet, ex. 2 X 3 ) 6 = Same Size Inlet, Outlet & Seat NOTE: Option 5 replaced by Option 6. Dimensions are not identical. Table E - Seal Type and Softgoods Seal Type 0 Normal FEP / N Expanda-Seal FEP / N Normal FEP (All) 3 Expanda-Seal FEP (All) 4 Normal Viton 5 Expanda-Seal Viton 6 Normal PTFE 8 Normal Buna-N 9 Expanda-Seal Buna-N Table G - Seat & Pallet Material Option G Seat Pallet 0 Standard* Standard* +1 Teflon Standard* 2 Aluminum Standard* 4 Stainless Steel Standard* 5 Teflon Coated SS Standard* A Standard* 316 Stainless Steel +B Teflon 316 Stainless Steel C Aluminum 316 Stainless Steel E Stainless Steel 316 Stainless Steel F Teflon Coated SS 316 Stainless Steel *Refer to Materials of Construction + These Options not Available with ATEX Models Table H - Trim Option H Description 0 Normal 1 Stainless Steel Trim Trim includes Stem, Stem Guide, Side Guides, Nuts, Bolts, and Screen. For an ATEX Certified Valve choose Option H1. Table F - Pressure Range & Load Weight Material Option F Description Material 0 **Standard Pressure Setting = 0.5 oz/in 2 Lead 1 >Standard to 2.9 oz/in 2 Lead 2 Over 2.9 oz/in 2 Lead 4 **Standard Setting 316 Stainless Steel 5 Over 2.9 oz/in Stainless Steel 6 > Standard to 2.9 oz/in Stainless Steel **Expanda-Seal min. pressure setting: 1.5 oz/in 2 5
94160 Pressure Relief Vent. Features. Pressure Relief Vent. Designed for high efficiency & economy. Provides maximum flow capacity
The Shand & Jurs provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency. The improved
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
94115 Vacuum Vent (Side Mounted) Features. Vacuum Vent (Side Mounted) Side Mounted
94115 The Shand & Jurs 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
Varec 2010B/2020B Pressure and Vacuum Relief Valves 2010B
Varec 0B/B The Varec 0B/B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction The Varec 0B and B and Relief
Model 1220A PRESSURE / VACUUM RELIEF VALVE PRESSURE / VACUUM RELIEF VALVE WITH PIPE-AWAY FEATURE SPECIAL FEATURES GROTH,THE CAPABILITY COMPANY
Sizes 2 through 12 Pressure settings 0.5 oz/in 2 to 15 PSIG Vacuum settings 0.5 oz/in 2 to 12 PSIG PRESSURE / VACUUM RELIEF VALVE Model 1220A with Pipe-Away Feature Available in aluminum (type 356), carbon
450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved)
Instruction Manual 450 and 550 Series March 2015 450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved) Table of Contents Introduction...1 Specifications...2 Principle of Operation...4 Installation...4
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
WB produces >>> 1. TANK FITTING PRODUCTS 2. ALUMINUM DOME COVERS 3. INTERNAL FLOATING ROOF SYSTEMS 4. EXTERNAL FLOATING ROOF SEAL SYSTEMS
WB produces >>> 1. 2. ALUMINUM 3. 4. SEAL 5. 3+1 WB, World Best Products, World Best Service, World Best Technology INDEX >>> 1. Pressure & Vacuum Relief Valves Products 03 2. Flame Arrestor Products 05
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
Varec 3500B, 3600B and 3650B Series Weight Loaded Vacuum or Pressure Relief Valves. 3500B Series
Varec 00B, 00B and 0B Series Weight Loaded or Pressure Relief Valves The 00B, 00B and 0B vacuum breakers are designed to provide superior seat tightness while protecting liquid storage vessels, vapor recovery
VESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales
VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are
VAREC SERIES 2010B/2020B/3500B PRESSURE AND VACUUM RELIEF VALVE INSTRUCTION, OPERATION AND MAINTENANCE MANUAL
Before installation these instructions must be fully read and understood 2010B 3500B 2020B The VAREC Vapor Control Inc. 2010B/2020B/3500B Series pressure and/or vacuum relief valves have not been tested
VAREC 3600B/3650B SERIES PRESSURE OR VACUUM RELIEF VALVES INSTRUCTION, OPERATION AND MAINTENANCE MANUAL
Before installation these instructions must be fully read and understood 3600B 3650B DISCLAIMER OF WARRANTIES The contract between Varec Vapor Control Inc. and our customer states Varec Vapor Control Inc.
METAL & DUAL SEATED PISTON VALVES
VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially
P600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
Cover Page - Series 60 Wafer Check Valves
DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials
P630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
VESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
Iron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
The Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications. Features Double flanged body design with face-to-face dimensions,
KEYSTONE SERIES GR RESIlIENT SEATED BUTTERFly VAlVES GRF
A heavy duty double flanged concentric design resilient seated butterfly valve FEATURES GENERAL APPLICATION These valves are for water or air service where a drop-tight shut-off and double flanged body
ALTOFLUX IFS 4000/4005
KROHNE 03/2002 7.02351.22.00 GR ALTOFLUX IFS 4000/4005... result of more than 40 years experience with electromagnetic flowmeters Liner made of KROHNE Teflon -PFA or other fluorines Dimensionally stable,
FLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
Carbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
MECHANICAL LEVEL CONTROLS
FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. CERTIFICATIONS:
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
VAREC SERIES 711 PRESSURE RELIEF VENT
VAREC SERIES PRESSURE RELIEF VENT A spring-loaded vent designed to protect low and medium pressure storage tanks, gas headers, process vessels and waste gas collection systems from overpressure FEATURES
General Service Butterfly Valves. Series 120, 140, 160, 300
General Service Butterfly Valves Series 0, 0, 0, 00 Av-Tek Butterfly Valves Concentric Series Technical Data Size Range: Series 0 - " to " Wafer Series 0 - " to 0" Lug Series 0 - " to " Flanged Series
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
Certification for Gas EN Certification EN EN Hygienic Certification
ISO 900-200 Certification Brandoni S.p.A. - Italy ISO 900-200 Certification Brandoni Qian An Valves Co. Ltd. Certification Brandoni S.p.A. Industrial valves has been one of the first companies in the Valsesia
Butterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
vapor control systems Quality, Dependability, Service. Reputation Built on Valve Concepts, Inc. com A Cashco, Inc.
vapor control A Cashco, Inc. Company systems Reputation Built on Quality, Dependability, Service. Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
Materials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
OUNCES PRESSURE REGULATORS
OUNCES PRESSURE REGULATORS BACK PRESSURE TO ATMOSPHERE W/OUTSIDE SUPPLY Adjusting Screw 897 Nut 922 636SS6 (2.5 lbs. Std.) Spring Plate 636SS6 (5 lbs. Opt.) 7148S6 (20 lbs. Opt.) Bonnet 1336 Nut 2912 Screw
PN 16 catalogue-no. AW-C31
Series AW butterfly valve, wafer type PN 10 catalogue-no. AW-B21 PN 16 catalogue-no. AW-C31 size Pressure rating PN Hydrost. Test pressure in bars for working pressure in bars at working termperatures
Neotecha Type KR Ball Check Valve and Type SG Sight Glass
These PFA lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG0.3 (ASTM A-395). Heavy duty PFA lining. Borosilicate glass for temperatures
M Series Floating Metal Seat Ball Valve
M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services
SECTION PLUMBING PIPING
SECTION 22 1000 PLUMBING PIPING PART 1 GENERAL 1.1 QUALITY ASSURANCE A. Perform Work in accordance with authority having jurisdiction standards. Utilize products as indicated in drawings and as allowed
Preventing or controlling corrosion by contact can be achieved by insulating the two metals with VR Insulation KIT (Flange Insulation Kit).
Galvanic or electrochemical corrosion is a wet process that takes place when two metals of different electric potential, (or two elements of the same metal with different electrical potential), are in
Standard features. Service intended. Design Internal diaphragm. Accuracy Refer to gauge model
Pressure gauge with diaphragm seal Model: P761 (Pressure gauge with inline type diaphragm seal) P762 (Pressure gauge with extension type diaphragm seal) P763 (Pressure gauge with pad type diaphragm seal)
TAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
TECHNO Male-Threaded, Grooved and Plain End Check Valves. Low pressure loss, lightweight design with compact construction
TECHNO Male-Threaded, Grooved and Plain End Check Valves Low pressure loss, lightweight design with compact construction TECHNO A well-known Brand with Past History and a Brand New Future! Techno Corporation
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
Isolation Gaskets 101
Isolation Gaskets 101 Discussion Outline Isolation Gasket Basics Product Offering Gasket Terms & Definitions Materials & Applications Standards & Codes Isolation Gasket Basics ISOLATION GASKET Isolation
International Standard Valve, Inc.
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com
H-25 Series. Up to 20 gpm (75.7/min) H-25 Specialized Designs
H-25 Series Up to 2 gpm (75.7/min) H-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 72 for complete specifications. The H-25 Hydra-Cell
WANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
Basket Strainers. Threaded. Basket. Strainers. Flanged Basket. Strainers
Basket Basket feature top removal of the screen. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal.
AMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
Low Pressure Control Valves
PB0013 Dec. 2017 Model MT Model DA Model ADA Contents Page Introduction Body Style 4 Valve Dimensions 6 Specifications 9 Elastomers 10 Model Code 11 NOTE This information is presented in good faith, Kimray
Model B. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
HD Engineering Data Pack
Tuthill Pump Group 1500 South Pulaski Road Alsip, IL 6003 USA o 70.39.500 f 70.3.069 HD Engineering Data Pack Contents: Industrial Duty Pump Mounting Dimensions Page : Page 3: Page 4: Page 5: Pump Mounting
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
LUNKENHEIMER FIGURE K4050 INLINE Y-BODY DN ASME CLASS 150
DN 50-500 ASME CLASS 150 The K4050 inline Y-body isolation valve is specially designed for severe service in alumina and mining applications where scale and erosion are present. FEATURES GENERAL APPLICATION
series. Stainless Steel Ball Valve with Spring Return Handle
76-500 series Stainless Steel Ball Valve with Spring Return Handle Female NPT Thread, 1/4 to 1 2000 CWP (psig), 1.25 to 2 1500 CWP (psig). Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29
RSCV1 AMERICAN DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL. It s What We Know. SERIES 2100 RESILIENT SEATED CHECK VALVE
3 16 SERIES 2100 RESILIENT SEATED CHECK VALVE AMERICAN FLOW CONTROL It s What We Know. AMERICAN DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION SERIES 2100 RESILIENT SEATED CHECK VALVE DROP-TIGHT SEATING at
Model B. Thermostatic Control Valves. Typical applications
Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
VersaFlow Coriolis 200 Sensor for Mass Flow Specifications
VersaFlow Coriolis 200 Sensor for Mass Flow Specifications 34-VF-03-12 June 2011 The Solution for Bulk Mass Flow Measurement The VersaFlow Coriolis 200 has been developed to meet the demanding transfer
D I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO
TM TECHNO Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
M Series 3-PC High Performance Metal Seat Ball Valve
M Series 3-PC High Performance Metal Seat Ball Valve 1 M Series 3-PC High Performance Metal Seat Ball Valve Full Bore TH/SW/BW/Flanged Ends Class 600LB The A-T Controls M Series metal seat ball valve is
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
CATALOG C-BFV-0518 AHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-0518 AHEAD OF THE FLOW Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
Model and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
Cast Iron Valves and Strainers
Cast Iron Valves and Strainers Proven reliability Robust design Economical Cast Iron Gate Valve F I G G A 1 4 G A T E V A L V E Heavy duty design Dezincification resistant trim Outside screw and yoke,
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
Milwaukee Butterfly Valves
Milwaukee Butterfly Valves PRICE SCHEDULE: MVBFV-1212 EFFECTIVE: July 1, 2013 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: PRICES: F.O.B. : $50.00 net All prices are each. Taxes extra
88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
International Standard Valve, Inc Cash Road, Stafford, Texas ISV s standards are our competitor s special options
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are our competitor s special options Product Summary is a registered trademark of International
Suitable for use in a variety of fluid systems.
Suitable for use in a variety of fluid systems. General Description Pipeline Wye Strainers are in thousands of applications in chemical, petroleum, pulp and paper, and utilities, as well as numerous commercial
8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.
SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional
TUFFy T3. side Mounting level controls. Worldwide level and flow solutions. compact and cost effective. FeATUres. ApplicATions 2014/68/EU
TUFFy T3 side Mounting level controls Tuffy liquid level switches are float actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
Pneumatic butterfly valve
Pneumatic butterfly valve R V Specialized manufacture, Specialized service, RFS valve devote to satisfy user s expectation, improving service quality continuously. keeping improving. Ordering Code R V
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
Swing Check Valve. Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508
Swing Check Valve PN16/PN25/Class125/Class250 Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508 Size 50 to 600 working pressure PN16/Class125. Size 50 to 300 working pressure is
Engineering Data Pack HD Industrial Duty Pumps
Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
SECTION GENERAL-DUTY VALVES FOR WATER-BASED FIRE-SUPPRESSION PIPING
PART 1 GENERAL SECTION 21 0523 GENERAL-DUTY VALVES FOR 1.01 SECTION INCLUDES A. Two-piece ball valves with indicators. B. Bronze butterfly valves with indicators. C. Iron butterfly valves with indicators.
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
for stable detonations and deflagrations in right angle design with shock absorber, unidirectional c - c1 dismantling dimension for servicing
for stable detonations and deflagrations in right angle design with shock absorber, unidirectional 1 2 3 Ø d DN Design with installed temperature sensor Connection to the protected side Function and Description