PART 1 SPECIFICATIONS FOR THE SUPPLY OF CALCIUM HYPOCHLORITE GRANULAR AND TABLETS TO WATER AUTHORITY OF FIJI
|
|
- Rosemary Mitchell
- 5 years ago
- Views:
Transcription
1 PART 1 SPECIFICATIONS FOR THE SUPPLY OF CALCIUM HYPOCHLORITE GRANULAR AND TABLETS TO WATER AUTHORITY OF FIJI Tender ref. 1
2 TABLETS TABLE OF CONTENTS 1 Ambient Conditions 3 PAGE NUMBER 2 Suitability for Potable Water 3 3 Quality Compliance 3 4 Marking 4 5 Protection during delivery 4 6 Storing, handling and hauling of Materials 4 7 Quality and Workmanship 4 8 Technical Specifications for HTH General Requirements. 5 9 Packing requirements 5 10 Marking 5 11 Conformity to Specifications 5 2
3 GENERAL 1 Ambient Conditions All materials shall be in every respect suitable for storage, use and operation in the conditions of temperature and humidity pertaining to the Tropical weather conditions of Fiji Islands in the Pacific.an average temperature of 30 deg. C. 2 Suitability for Potable Water Calcium Hypochlorite - HTH is used as a disinfectant in the process of water Treatment as a disinfectant to be supplied in a granular form and Tablets should contain a minimum of 65% available chlorine. All HTH supplied should be in compliance with the A.W.W.A standards -B specifications. 3 Quality Compliance The Supplier is obliged to produce a certificate of compliance to the said specifications, by a certified internationally recognized laboratory.this shall apply to all shipments done and forwarded to the Water Authority of Fiji with the respective shipping documents. The Manufacturer shall supply, furnish and prepare the necessary test samples of materials and supply the labour facilities and appliances for such testing as may be required to be carried out on his premises according to this specification. If there are no facilities at his own works for making the prescribed tests the Contractor shall bear the cost of carrying out the tests elsewhere. The Engineer and nominated Inspection authority shall have full access to all parts of the plant that are concerned with the testing, furnishing or preparation of materials for the performance and testing of work under this Specification. Further all materials shall be tested to the appropriate tests at the manufacturer s premises and shall be supported by a test certificate from an internationally recognized, ISO certified Laboratory. The format for test certificate shall be in accordance with the format given in the schedule of particulars. Contractor is held responsible for assuring the quality of the goods supplied by him until the final delivery point. Water Authority of Fiji if deemed necessary will carry out random tests to maintain and check quality of each shipment supplied. 3
4 4. Marking All markings shall be legible and durable unless otherwise specified and shall be as specified in this specification. Containers should be clearly labelled in compliance with the DG goods requirements. 5. Protection during Delivery The contractor shall provide protection to the approval of the Engineer, prior to the materials leaving the place of manufacture and shall maintain such protection until the items reach their destination in order to guard effectively against damage during transit and storage and the ingress of foreign matter inside the packages. All chemicals will be containerized as specified and shipped in 20 foot containers. 6. Storing, Handling and Hauling of Materials. All chemicals are to be shipped in safe containers and drums,transported in recommended 20 foot Storage containers in compliance with the dangerous Goods requirements. All containers are to be stored in cool / dry places. The contractor shall give instructions to the shipper on precautions to be taken in the handling of materials during loading, towage delivery and unloading and shall give particulars of these instructions to the purchaser. The price quoted shall be C.I.F (cost /insurance and freight) to Suva and Lautoka for all Overseas suppliers. For all Local (FIJI) Suppliers the pric es quoted shall be duty& VAT paid and delivered to Waila WTP. 7. Quality and Workmanship Calcium hypochlorite which i s intended t o s u p p l y s h a l l b e m a n u f a c t u r e d i n compliance with the ISO 9001: 2008 Quality Management System Standards. Any certificate regarding product conformity and quality management should be from an organization accredited to issue such certification and the manufacturer shall have this certification valid during the period of supply and delivery of the materials. Document evidence regarding accreditation together with the scope of certification should be provided. 4
5 8. GENERAL REQUIREMENTS. TECHNICAL SPECIFICATION FOR CALCIUM HYPOCHLORITE (HTH) 8.1 GENERAL HTH powder is to be in a granular form ( not powdery ).CalhypoTablets are to be of standard size to suit common tablet feeders. with average weight of 200 grams. Should be compatible to Water Treatment use with no Cyanuric acid content. To meet the AWWA Standards- B LEVEL OF IMPURITIES. Purely compatible for water treatment with no cyanuric acid content 8.3 PURITY LEVEL. Atleast 65 % available chlorine 9 PACKING REQUIREMENTS 10 MARKING - supplied in kg durable plastic containers - re-sealable after use. - containers to be well marked with the content details.. Every container has to be sealed and properly Labeled with the following information s a) Name of the product b) Name and address of the manufacturer. c) Trade mark, d) Net weight. e) Dangerous goods classifications code/ signs 11) CONFORMITY TO SPECIFICATIONS All containers to meet the relevant packaging and marking requirements. The laboratory test results from an independent recognized laboratory to confirm the quality as per the stated specifications under the General requirements and Technical specifications. 5
PART 1 SPECIFICATIONS FOR THE SUPPLY CHLORINE GAS TO THE WATER AUTHORITY OF FIJI
PART 1 SPECIFICATIONS FOR THE SUPPLY CHLORINE GAS TO THE WATER AUTHORITY OF FIJI Tender ref. (CHLORINE GAS) 1 TABLE OF CONTENTS 1 Ambient Conditions 3 PAGE NUMBER 2 Suitability for Potable Water 3 3 Quality
More informationDRINKING WATER DIVISION
DRINKING WATER DIVISION MEMORANDUM DATE: November 9, 2015 TO: FROM: SUBJECT: Chemical Vendors Wausau Water Works - Drinking Water Division Eric Lindman Sealed Bids for Hydrated Lime, Sodium Hypochlorite
More informationDRINKING WATER DIVISION. Sealed Bids for Hydrated Lime, Sodium Hypochlorite 12.5%, Sodium Silicate 40% Bulk
DRINKING WATER DIVISION MEMORANDUM DATE: November 20, 2014 TO: FROM: SUBJECT: Chemical Vendors Wausau Water Works - Drinking Water Division Sealed Bids for Hydrated Lime, Sodium Hypochlorite 12.5%, Sodium
More informationREQUEST FOR QUOTATION AND STATEMENT OF QUALIFICATIONS. RFQ No C
REQUEST FOR QUOTATION AND STATEMENT OF QUALIFICATIONS RFQ No. 10-419-024-1C RFQ FOR: SUPPLY AND DELIVERY OF VARIOUS WATER AND WASTEWATER TREATMENT CHEMICALS RFQ S CLOSE: 12:00 NOON, Monday, August 16th,
More informationDocument 2007 Rev 0 December 2005 Page 1 of 8
Document 2007 Rev 0 December 2005 Page 1 of 8 1. Scope... 2 2. Definitions... 2 a. LabTest...2 b. Factory Location/ Manufacturer's Premises...2 c. Manufacturer...2 d. Subcontractor...2 e. f. Out-Worker...2
More informationNUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0
REVISION NO. 0 NUCLEAR POWER CORPORATION OF INDIA LTD. (A GOVT. OF INDIA ENTERPRISE) SPECIFICATION NO.PB-E-542/REV. No.0 PAGE NO. 1 OF 24 DATE OF ISSUE (MONTH/YEAR) TOTAL NO. OF PAGES (Including cover
More informationONTARIO PROVINCIAL STANDARD SPECIFICATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2501 NOVEMBER 2001 MATERIAL SPECIFICATION FOR CALCIUM CHLORIDE FLAKE AND CALCIUM CHLORIDE SOLUTION TABLE OF CONTENTS 2501.01 SCOPE 2501.02 REFERENCES
More informationTraining Requirements for this product
BOROUGH OF SOMERSET SPECIFICATIONS Lime The purpose of these specifications is to obtain for the Borough of Somerset, Hydrate Lime, for use at the Water Filtration Plant. All material will be in conformity
More informationTECHNICAL SPECIFICATIONS
SECTION 07 TECHNICAL SPECIFICATIONS OF CHAIN PULLEY (3-TON) 7.0 TECHNICAL SPECIFICATIONS/ REQUIREMENTS OF CHAIN PULLEY 7.1 GENERAL This section of the document includes the design, manufacture, testing
More informationGENERAL TERMS & CONDITIONS (GT&C) FOR ITEMS & SERVICES (EXCLUDING CIVIL WORKS)
GENERAL TERMS & CONDITIONS (GT&C) FOR ITEMS & SERVICES (EXCLUDING CIVIL WORKS) A10. BLANK A20. SECURITY DEPOSIT. A21. The successful bidder shall submit a Security Deposit @ 5 % of the contract / order
More informationB. All new water mains and temporary pipelines shall be disinfected prior to connection to the District s existing system.
NORTH MARIN WATER DISTRICT STANDARD SPECIFICATIONS SECTION 15041 DISINFECTION OF PIPING PART 1 GENERAL 1.01 DESCRIPTION This section describes requirements for disinfection by chlorination of potable and
More informationTHOMAS S. MACKEY WATER TREATMENT PLANT GULF COAST WATER AUTHORITY TECHNICAL SPECIFICATIONS FOR POWDERED ACTIVATED CARBON (BULK)
THOMAS S. MACKEY WATER TREATMENT PLANT GULF COAST WATER AUTHORITY TECHNICAL SPECIFICATIONS FOR POWDERED ACTIVATED CARBON (BULK) BID QUANTITIES: POWDERED ACTIVATED CARBON ~150,000-200,000 POUNDS Gulf Coast
More informationEXW EX WORKS (... named place) FCA. FREE CARRIER (... named place)
EXW EX WORKS (... named place) "Ex works" means that the seller delivers when he places the goods at the disposal of the buyer at the seller s premises or another named place (i.e. works, factory, warehouse,
More informationPurchase Order Quality Clauses
Purchase Order Quality Clauses SQC-01 SQC-02 SQC-03 SQC-04 SQC-05 SQC-06 SQC-07 SQC-08 INSPECTION The supplier shall have a system for inspection, prevention and detection of nonconforming products. As
More informationDC 102 FACTORY INSPECTION PROCEDURES AND TESTS. Requirements for Manufacturers
FACTORY INSPECTION PROCEDURES AND TESTS Requirements for Manufacturers Warszawa, February 1, 2012 CONTENTS Page No. FOREWORD 2 1 INTRODUCTION 2 2 DEFINITIONS 2 2.1 Factory Location/Manufacturer s Premises
More informationMATERIAL SPECIFICATION FOR SODIUM CHLORIDE SOLID AND SODIUM CHLORIDE SOLUTION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 2502 APRIL 2017 MATERIAL SPECIFICATION FOR SODIUM CHLORIDE SOLID AND SODIUM CHLORIDE SOLUTION TABLE OF CONTENTS 2502.01 SCOPE 2502.02 REFERENCES
More informationCHEMICAL BIDS CITY OF MARTINSVILLE, VIRGINIA REQUEST FOR SEALED BID
CHEMICAL BIDS CITY OF MARTINSVILLE, VIRGINIA REQUEST FOR SEALED BID Sealed bids will be received by the City of Martinsville, Virginia at the office of the Purchasing Agent, located at the Central Warehouse,
More informationEXW EX WORKS. (Named place...)
EXW EX WORKS (Named place...) Ex works" means that the seller delivers when he places the goods at the disposal of the buyer at the seller s premises or another named place (i.e. Works, factory, warehouse,
More informationMERCHANT SHIPPING (MARITIME LABOUR CONVENTION) ACT 2014 (ACT 6 OF 2014)
Merchant Shipping (Maritime Labour Convention) (Medicines and Medical Equipment) Regulations 2014 Enacting Formula 1 Citation and commencement 2 Definitions 3 Application 4 Master s and shipowner s responsibilities
More informationMATERIAL SPECIFICATION FOR CALCIUM CHLORIDE
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.MUNI 2501 November 2017 (Formerly OPSS 2501 April 2015) Note: The MUNI implemented in November 2017 replaces OPSS 2501 COMMON, April 2015 with no technical
More informationNSIC THE NATIONAL SMALL INDUSTRIES CORPORATION LTD
NSIC THE NATIONAL SMALL INDUSTRIES CORPORATION LTD (A Government of India Enterprise) NSIC-TECHNICAL SERVICES CENTRE Kushaiguda, ECIL(PO), HYDERABAD-500 062. Phone Nos. 27121422, 27126646 Fax. No.27122303
More informationMATERIAL SPECIFICATION FOR CALCIUM CHLORIDE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2501 NOVEMBER 2013 MATERIAL SPECIFICATION FOR CALCIUM CHLORIDE TABLE OF CONTENTS 2501.01 SCOPE 2501.02 REFERENCES 2501.03 DEFINITIONS 2501.04 DESIGN
More informationCASUAL ENQ: UGBPS/TECH-12487/IMD/ Web Casual /38 / 2010
CASUAL ENQ: UGBPS/TECH- /12487/IMD/ Web Casual /38/2010 GAS BASED POWER STATION - UTRAN UTRAN 394 105, DIST. SURAT, GUJARAT, INDIA P&T EXTENSTION NO: (0261) - 2499851, 2499153 FAX: 0261-2499180 WEB CASUAL
More informationIncoterms. The CFR term requires the seller to clear the goods for export.
PO Box 19030 Charlotte, NC 28219 P: 704.359.0045 F: 704.359.0645 Incoterms CFR - COST AND FREIGHT (named port of destination) CIF - COST, INSURANCE AND FREIGHT (named port of destination) CIP - CARRIAGE
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION Date: 26/10/2016 RFQ No. : RFQ/10ACT/IHPF/WATERTESTING/ERB/26-10-2016/001 ACTED is requesting written quotations for the supply of the following services: PRODUCT SPECIFICATIONS:
More informationSYRIAN ARAB REPUBLIC MINISTRY OF ELECTRICITY PUBLIC ESTABLISHMENT FOR DISTRIBUTION The ELECTRICITY (PEDE) TENDER DOCUMENTS FOR
SYRIAN ARAB REPUBLIC MINISTRY OF ELECTRICITY PUBLIC ESTABLISHMENT FOR DISTRIBUTION The ELECTRICITY () TENDER DOCUMENTS FOR PREMOULDED CAΒLE TERMINATIONS (INDOOR AND OUTDOOR) AND JOINTS SUITABLE FOR 12/20
More informationAnnex. 4 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS
Annex. 4 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS THIS DOCUMENT IS TO PROVIDE THE OFFERORS WITH THE PRODUCT(S) SPECIFICATIONS AND TECHNICAL REQUIREMENTS FOR THE PROCUREMENT OF COMMODITIES LISTED
More informationSUPPLIER QUALITY REQUIREMENTS
SUPPLIER QUALITY REQUIREMENTS TABLE OF CONTENTS 1) PURPOSE PG 2 2) KINNEAR PURCHASE ORDER PG 2 3) USE AND COMMUNICATION PG 2 4) SUPPLIER APPROVAL PG 2 5) GENERAL REQUIREMENTS PG 3 SQD Rev 2 2014-08-13
More informationPartners and staff can contribute to maintaining and improving PwC s health & safety standards by:
Responsibilities of facilities management teams Facilities management teams have a duty to assist in the implementation of the firm s health & safety policy at a local office level. Responsibilities of
More informationOPW Engineered Systems
1 of 5 1.0 Purpose 1.1 The purpose of this manual is to promote a clear understanding of OPW Engineered Systems (OPW-ES) expectations and requirements for suppliers. This manual explains the process OPW-
More informationEPICOR, INCORPORATED QUALITY ASSURANCE MANUAL
EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL Revision: 6 Date 05/18/09 EPICOR, INCORPORATED 1414 E. Linden Avenue P.O. Box 1608 Linden, NJ. 07036-0006 Tel. 1-908-925-0800 Fax 1-908-925-7795 Table of Contents:
More informationThis term may be used irrespective of the mode of transport, including multimodal transport.
Incoterms 2000 International Chamber of Commerce (ICC) Official Rules for the Interpretation of Trade Terms. To be used for International Transportation only, Domestic terms may vary. Additional information
More informationANNEX 5 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS
ANNEX 5 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS This Document is to provide the offerors with the product(s) specifications and Technical Requirements for The Procurement of the commodities listed
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION To, GAIL WEBSITE VENDOR, India Vendor Code : 101019938 No. :GAIL/VAG/9757/C/3200026824/&P/LAB/104/6 Date:14.12.2006 Due on : 03.01.2007 at 14:00 Hrs IST Tender Opening Date : 03.01.2007
More informationWATER TREATMENT CHEMICALS 2012
REQUEST FOR BIDS WATER TREATMENT CHEMICALS 2012 BID OPENING: DATE: Tuesday, April 10, 2012 TIME: 11:00 a.m., Local Time PLACE: Medford Water Commission Office Medford Water Commission 200 South Ivy Street
More informationANNEX 5 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS
ANNEX 5 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS This Document is to provide the offerors with the product(s) specifications and Technical Requirements for The Procurement of the commodities listed
More informationSupplier Packaging Guidelines ABB Inc. Robotics, North America 3.03.P01.W02, Rev. A
Supplier Packaging Guidelines ABB Inc. Robotics, North America 3.03.P01.W02, Rev. A Contents 1. Introduction... 3 2. General Requirements... 4 2.1. Environment... 4 2.2. Material Handling... 4 2.3. Air
More informationSECTION E SCHEDULE OF QUANTITIES AND RATES
SECTION E SCHEDULE OF QUANTITIES AND RATES SCHEDULE OF QUANTITIES SECTION: E Scope of work under present tender is: S DESCRIPTION UNIT QTY NO. 1 Hydraulic Snubber with Total stroke 140mm, working stroke
More informationQQ-L-201f November 29, 1965 SUPERSEDING Int. Fed. Spec. QQ-L-00291e (Navy-Ships) December 10, 1962 and Fed. Spec. QQ-L-291d April 6, 1961
QQ-L-201f November 29, 1965 SUPERSEDING Int. Fed. Spec. QQ-L-00291e (Navy-Ships) December 10, 1962 and Fed. Spec. QQ-L-291d April 6, 1961 FEDERAL SPECIFICATION LEAD SHEET This specification was approved
More informationRev A. Vendor Compliance Manual
9004160 Rev A Vendor Compliance Manual Using the Vendor Compliance Manual This manual is designed to provide you with Automation Products Group, Inc. s (APG s) supply chain requirements. Please carefully
More informationTRIPURA NATURAL GAS COMPANY LIMITED
TRIPURA NATURAL GAS COMPANY LIMITED PROJECT FOR CNG & CITY GAS DISTRIBUTION FOR AGARTALA BID DOCUMENT FOR PROCUREMENT OF PE PIPES UNDER LIMITED DOMESTIC COMPETITIVE BIDDING Bid Document No.: 05/51/23MC/TNGCL/028
More informationVALLECITOS WATER DISTRICT SECTION POLYVINYL CHLORIDE (PVC) PRESSURE PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. This section designates the requirements for the manufacture and installation of polyvinyl chloride, abbreviated PVC, pressure pipe. 1.2 RELATED WORK SPECIFIED ELSEWHERE
More informationP.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT
CEB SPECIFICATION 005-1: 2012 P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS PAGE 1. Scope 03
More informationCITY OF WEYBURN WATER TREATMENT PLANT CHEMICAL SUPPLY TENDER (2019)
CITY OF WEYBURN CITY OF WEYBURN WATER TREATMENT PLANT CHEMICAL SUPPLY TENDER (2019) COW2019-001 2018 Table of Contents 1. INSTRUCTIONS TO TENDERERS... 1 1.1 INTRODUCTION... 1 2. GENERAL TERMS... 1 1.1
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION To, GAIL WEBSITE VENDOR, India Vendor Code : 101019938 No. :GAIL/VAG/C&P/27/3200033075/LPG/INS/2007 Date:05.06.2007 Due on : 27.06.2007 at 14:00 Hrs IST Tender Opening Date : 27.06.2007
More informationUNHCR/HCP/2016/xx High Commissioner s Policy on Quality Management in the Supply of Goods and Services to Persons of Concern
UNHCR/HCP/2016/xx on Quality Management in the Supply of Goods and Services to Persons of Concern Approved by: Filippo Grandi, High Commissioner Signature: Approval date: Contact: Date of entry into force:
More informationName & Specification of the Item. (Annexure 1)
Name & Specification of the Item (Annexure 1) Special Terms & conditions (Optional) (Annexure 2) Annexure 3 General Terms & conditions Instructions to the bidder 1. The bid should remain valid for a period
More informationINCOTERMS An overview. What the terms mean
INCOTERMS 2017 An overview International Commercial Terms ( Incoterms ) are internationally recognized standard trade terms used in sales contracts. They re used to make sure buyer and seller know: Who
More information1025 E. King Street Revision: C Winona, MN PURCHASE ORDER TERMS AND CONDITIONS
PURCHASE ORDER TERMS AND CONDITIONS By accepting a purchase order from Winona Pattern & Mold (WPM), the Supplier is responsible for acknowledging agreement to fulfill all order requirements. Acceptance
More informationSpecification for: All Aluminum Alloy (AAAC) Type AL3 Stranded conductor For distribution overhead lines
Page no. :1 of 13 Specification for: All Aluminum Alloy (AAAC) Type AL3 Prepared by: Eng. N. Mizrachi (-חתום ( Checked by: I. Bester Approved by: Eng. Y. Samoocha (-חתום ( 1 Page no. :2 of 13 Contents:
More informationPurchase Order Quality Requirement Clauses
Purchase Order Quality Requirement Clauses Section I: Administrative. 1. Scope. This document lists the quality purchase requirements (QPRs) that JEM Engineering uses in business agreements such as purchase
More informationSupply & Installation of new Air Conditioning Units at various FEA Sites Fiji Wide
Supply & Installation of new Air Conditioning Units at various FEA Sites Fiji Wide Tender Number: MR 60/2017 1 Fiji Electricity Authority (FEA) is a statutory body vested with the responsibility for the
More informationMATERIAL SPECIFICATION FOR CALCIUM CHLORIDE FLAKE AND CALCIUM CHLORIDE SOLUTION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 2501 NOVEMBER 2005 MATERIAL SPECIFICATION FOR CALCIUM CHLORIDE FLAKE AND CALCIUM CHLORIDE SOLUTION TABLE OF CONTENTS 2501.01 SCOPE 2501.02 REFERENCES
More informationI ncoterms1 are a set of trading terms that have been standardized for international
Enterprise Supply Chain Management: Integrating Best-in-Class Processes By Vivek Sehgal Copyright 2009 by Vivek Sehgal APPENDIX G Incoterms (International Commercial Terms) I ncoterms1 are a set of trading
More informationFIJI ELECTRICITY AUTHORITY BIDDING DOCUMENT
FIJI ELECTRICITY AUTHORITY BIDDING DOCUMENT MR 14/2018 PREFERRED SUPPLIER FOR 132KV LINE HARDWARE i Section 1: Instructions to Bidders 1. Scope of Bid The Fiji Electricity Authority (hereinafter referred
More informationForm Fit & Function Engineering, LLC 350 Seminole Drive Spartanburg, SC Supplementary Quality Assurance Clauses
Supplementary Quality Assurance Clauses The Supplementary Quality Assurance Clauses specified on the face of the attached Purchase Order are listed below. Your compliance with these requirements is necessary
More informationCorrigendum-I. The others terms & condition of the tender will remain the same at 1:00 P.M at 1:00 P.M.
No. LIB-INS-211-18-19 Date: October 12, 2018 Corrigendum-I Reference No.: LIB-INS-211-18-19 dated 12.09.2018 Subject: Extension of date for submission and Opening of Bids for Supply & Installation of Hybrid
More informationORIGINATING OFFICE: FO:TCF DISTRIBUTION: S-01 CBP DIRECTIVE NO A DATE: AUGUST 7, 2003 SUPERSEDES: ,1/7/88 REVIEW DATE: AUGUST 2006
CUSTOMS AND BORDER PROTECTION DIRECTIVE ORIGINATING OFFICE: FO:TCF DISTRIBUTION: S-01 CBP DIRECTIVE NO. 3240-036A DATE: AUGUST 7, 2003 SUPERSEDES: 3240-036,1/7/88 REVIEW DATE: AUGUST 2006 SUBJECT: IN-BOND
More informationTECHNICAL SPECIFICATION FOR ELECTRICAL ASSET S CONDITION MONITORING EQUIPMENTS
TECHNICAL SPECIFICATION FOR ELECTRICAL ASSET S CONDITION MONITORING EQUIPMENTS Signature & Seal of Bidder Page 1 of 23 SECTION: I QUALIFYING REQUIREMENT FOR BIDDERS FOR CONDITION MONITORING EQUIPMENT 1)
More informationNo: PUR/IMP/JPL/UVIT/ISO/39 July 29, 2008
No: PUR/IMP/JPL/UVIT/ISO/39 July 29, 2008 M/s. Dear Sirs, The Director, Indian Institute of Astrophysics, Bangalore invites Sealed Tenders for the Import of Dichroic mirrors & NUV Interference filters
More informationSPECIFICATION SHEET NO. 1 ATTACHMENT 3 TEMPERATURE MONITORING DEVICE
TEMPERATURE MONITORING DEVICE DATE: 4 Feb 2016 1. SCOPE 1.1 This Specification Sheet covers the requirements for various types and sizes of temperature monitoring devices. 1.2 Intended use. Temperature
More informationAPPENDIX C ADDITIONAL TERMS AND CONDITIONS PERTAINING TO FOREIGN PROCUREMENTS
APPENDIX C ADDITIONAL TERMS AND CONDITIONS PERTAINING TO FOREIGN PROCUREMENTS I. PROVISIONS APPLICABLE TO GOODS BEING IMPORTED INTO THE UNITED STATES WITH ASSISTS PROVIDED BY BUYER A. APPLICABILITY This
More informationRFQ CISCO NETWORK ROUTER
RFQ CISCO NETWORK ROUTER REF: UIIC-RO-ITD-2018-ROUTER-1 UNITED INDIA INSURANCE CO. LTD INFORMATION TECHNOLOGY DEPARTMENT RO VISAKHAPATNAM, PAVAN ENCLAVE, 30-15-153, Floor No - 4 DABAGARDENS MAIN ROAD,
More informationSTANDARD QUALITY ASSURANCE PROVISIONS FOR PURCHASED MATERIALS
1. GOVERNMENT/CUSTOMER SOURCE INSPECTION: a. Government/Customer inspection is required prior to shipment from your plant. Upon receipt of this order, promptly notify the Government/Customer representative
More informationQP Supplier Quality Requirements Manual. Purchasing. Dearborn Inc. Revision: E Page 1 of PURPOSE
Page 1 of 8 1.0 PURPOSE 1.1 The purpose of this manual is to have a single document which conveys the minimum quality requirements and manufacturing practices expected of suppliers for value added products
More informationPrivate IMDG - Receival and Delivery Procedures Adelaide Container Terminal
IMDG - Receival and Delivery Procedures Adelaide Container Terminal This document reproduces in part (less than 10%) AS 3846 1998 and is produced exclusively for in house usage. No commercial benefit or
More informationMaharashtra State Electricity Distribution Co. Ltd.
Maharashtra State Electricity Distribution Co. Ltd. SPECIFICATION NO. MSEDCL/ DIST/MM-III/02/2008/R1(010111) SPECIFICATION FOR L.T. PIN/SHACKLE INSULATORS Page 1 of 12 MAHARASHTRA STATE ELECTRICITY DISTRIBUTION
More informationTerms & conditions in procurement logistics. The delivery terms make the difference. The pick-up or delivery principles
Terms & conditions in procurement logistics The delivery terms make the difference The procurement costs of raw materials can vary considerably from supplier to supplier. Reasons for this difference can
More informationINCOTERMS. The current set of Incoterms is Incoterms A copy of the full terms is available from the International Chamber of Commerce.
INCOTERMS An overview International Commercial Terms ( Incoterms ) are internationally recognized standard trade terms used in sales contracts. They re used to make sure buyer and seller know: Who is responsible
More informationINCOTERMS The current set of Incoterms is Incoterms A copy of the full terms is available from the International Chamber of Commerce.
INCOTERMS 2015 An overview International Commercial Terms ( Incoterms ) are internationally recognized standard trade terms used in sales contracts. They re used to make sure buyer and seller know: Who
More informationNSW first supply approach
NSW first supply approach Introduction NSW Container Deposit Scheme The NSW Government's Container Deposit Scheme will commence on 1 December 2017. The Scheme will be the largest litter reduction initiative
More information2.1. The Seller s Quality Management System shall ensure all relevant Purchase Order requirements are flowed down to their sub-tier sellers.
Page 1 of 3 REQUIREMENTS 1. Quality Management System 1.1. Sellers shall have a quality management system in compliance with the current revision of AS9100 or ISO 9001 or have a RF-Lambda approved quality
More informationREQUEST FOR QUOTATION
REQUEST FOR QUOTATION To, GAIL WEBSITE VENDOR, India Vendor Code : 101019938 No. :GAIL/VAG/LPG/93/3200027867/C&P/HR/06LT Date:19.01.2007 Due on : 07.02.2007 at 14:00 Hrs IST Tender Opening Date : 07.02.2007
More informationHello, I m Dimitris Kloussiadis, export consultant with the International Trade Center of the University of Georgia SBDC.
Hello, I m Dimitris Kloussiadis, export consultant with the International Trade Center of the University of Georgia SBDC. Welcome to Session 4 of Export-U.. Export-U.com is a series of export minicourses
More informationTECHNICAL SPECIFICATION FOR L. T. XLPE POWER CABLE
TECHNICAL SPECIFICATION FOR L. T. XLPE POWER CABLE SEAL & SIGNATURE OF THE TENDERER PAGE 1 OF 14 TECHNICAL SPECIFICATION FOR LT XLPE POWER CABLES (SPECIFICATION NO.MM/I/LTXLPE/2006) 1. SCOPE: The specification
More informationQuality Management System
Quality Management System 6.1 Quality Q-Codes () 6.1 Quality Q-Codes Quality Clauses The following quality control clauses apply when specifically noted on the Gear Technology purchase order: Q1- Material
More informationPROVISIONS FOR NSPA SMALL VALUE PURCHASE ORDERS (October 2017)
PROVISIONS FOR NSPA SMALL VALUE PURCHASE ORDERS (October 2017) 1. SPECIAL AREAS Except as otherwise provided in this purchase order, the Contractor shall not subcontract for use in the performance of this
More informationGROUP-A Gas Meter With EVC and AMR 1 GAS METER G-4 NOS GAS METER G-6 NOS GAS METER G-10 NOS
SCHEDULE OF RATES (SOR-1A) (FOR DOMESTIC BIDDERS) Design, detail engineering, manufacturing, assembly, factory testing, Inspection, supply packaging, handling, transportation, loading/ unloading at sites/
More informationSUPPLIER QUALITY REQUIREMENTS
SUPPLIER QUALITY REQUIREMENTS Revision B January 2017 This document establishes general and special product assurance requirements clauses for use on the Purchase Order and is part of the Terms and Conditions
More informationP.V.C. INSULATED UNARMOURED COPPER CABLES
083 : 2007 CEB SPECIFICATION P.V.C. INSULATED UNARMOURED COPPER CABLES CEYLON ELECTRICITY BOARD SRI LANKA Specification for P.V.C. INSULATED UNARMOURED COPPER CABLES CEB Specification 083 : 2007 CEYLON
More informationSCOPE OF WORK SUBSTATIONS
Page 2 of 11 REVISION CONTROL Issued for Internal Review Issued for Client Review Issued for DFS REVISION HISTORY Revision Date Pages Revised Remarks 00 29/08/2017 Multiple Comments incorporated 01 05/04/2018
More informationSupplier Quality Assurance Requirements
Page 1 of 5 This document specifies the quality assurance requirements the supplier must comply with and is considered as part of purchase orders generated by Kanfit Ltd. These requirements are mandatory
More informationASM AEROSPACE SPECIFICATION METALS, INC NW 34 th Place #B28 Terrace Pompano Beach, Florida Tel: Fax:
SUBCONTRACTOR QUALITY SYSTEM QUESTIONNAIRE General: Company Name: Address: City: State: Zip: Country: Telephone: Fax: Business Information: Primary Products/Services: Type of Business: Manufacturing Distributor
More informationSECTION FIRE HYDRANTS
SECTION 02080 FIRE HYDRANTS PART 1 - GENERAL 1.01 DESCRIPTION A. Work Specified The work specified shall include all labor, material, equipment, tools, services and incidentals necessary to furnish and
More informationChapter 22 Export Procedures and Documents
Chapter 22 Export Procedures and Documents The exporting activity involves several commercial and regulatory procedures. These procedures also involve considerable documentation requirements. The export
More informationINVITATION FOR QUOTATIONS FOR SUPPLY OF EQUIPMENT THIS INVITATION DULY SIGNED ON ALL PAGES SHOULD BE ATTACHED WITH THE QUOTE
TAMIL NADU MEDICAL SERVICES CORPORATION LIMITED (A Government of Tamilnadu Undertaking) 417, PANTHEON ROAD, EGMORE, CHENNAI 600 008. ISO 9001:2008 Certified Organisation Phone:28191890, 28190259 Fax No.28190636
More informationM/s.KITCO Limited, P.B.No.1820, Ravipuram, M.G.Road, Cochin NOTICE INVITING TENDER
M/s.KITCO Limited, P.B.No.1820, Ravipuram, M.G.Road, Cochin 682 016. NOTICE INVITING TENDER Dated: 23.12.2011 Sealed tenders are invited on behalf of the Chairman, Cochin Special Economic Zone Authority
More informationTHE FIJI SUGAR CORPORATION LIMITED FSC HEAD OFFICE, DRASA AVENUE RD, BALAWA, LAUTOKA
THE FIJI SUGAR CORPORATION LIMITED FSC HEAD OFFICE, DRASA AVENUE RD, BALAWA, LAUTOKA Phone: 6662555 Fax: 6664685 ---------------------------------------------------------------------------------------------------------------
More informationDELIVERY, SHIPMENTAND HANDLING. Special Requirements per Delivery Terms: Reserved.
DELIVERY, SHIPMENTAND HANDLING 1. Delivery Instructions: The Equipment shall be delivered in accordance with INCOTERMS 2000 subject to the special terms specified in the Agreement/Purchase Order and the
More informationProcurement Quality Assurance Requirements
1. REQUIREMENTS 1.1 Quality System This document provides the minimum Quality System Requirements to externally provided processes, products and services to Superior Thread Rolling (STR). Suppliers must
More informationIMPORTING YOUR GOODS USING SEA FREIGHT. 1 Magellan Logistics
IMPORTING YOUR GOODS USING SEA FREIGHT 1 Magellan Logistics 2017 - www.magellanlogistics.com.au Shipping containers were developed from the railway s iron boxes that were initially used to transport coal
More informationDomtar Standard Terms of Sale March 2017
Domtar Standard Terms of Sale March 2017 A SALE TRANSACTION IS GOVERNED BY SELLER S STANDARD TERMS AND CONDITIONS OF SALE, UNLESS OTHERWISE STATED IN A WRITTEN AGREEMENT BETWEEN THE PARTIES (either signed
More informationTable of Contents. 1.0 Introduction 1.1 Overview 1.2 Customer Responsibilities
1400 Lunar Drive Wapakoneta, OH 45895 Supplier Manual Table of Contents 1.0 Introduction 1.1 Overview 1.2 Customer Responsibilities 2.0 Supplier Quality Expectations 2.1 Quality System Requirements 2.2
More informationTable of Contents Table of Contents... 2 Introduction to Manual... 3 Scope... 3
Supplier Quality Manual Original Issue 12 February 2015 Uncontrolled in printed form Page 1 of 8 f Table of Contents Table of Contents... 2 Introduction to Manual... 3 Scope... 3 Supplier Responsibility...3
More informationAryabhatta Research Institute of Observational Sciences (ARIES)
Aryabhatta Research Institute of Observational Sciences (ARIES) (An Autonomous Institute under Department of Science and Technology, Govt. Of India) Manora peak, Nainital, Uttarakhand 263002 India Tel:
More informationQUALITY AGREEMENT. This Quality Agreement is made between. (Customer Legal Entity Name Hereinafter called CUSTOMER ) And
QUALITY AGREEMENT This Quality Agreement is made between (Customer Legal Entity Name Hereinafter called CUSTOMER ) And (Pall Legal Entity Name Hereinafter called PALL ) 1. Table of Contents 1. Table of
More informationANNEX 4 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS
ANNEX 4 PRODUCT SPECIFICATIONS AND TECHNICAL REQUIREMENTS This Document is to provide the offerors with the product(s) specifications and Technical Requirements for The Procurement of the commodities listed
More informationDRAFT ITEM GP-100 ITEM GP-100 CONTRACTOR QUALITY CONTROL PROGRAM 1.1 GENERAL
1.1 GENERAL When the specification requires a Contractor Quality Control Program, the Contractor shall establish, provide, and maintain an effective Quality Control Program that details the methods and
More informationTown of Hanover Department of Public Works 40 Pond Street Hanover, Massachusetts Telephone Fax
Town of Hanover Department of Public Works 40 Pond Street Hanover, Massachusetts 02339-1693 Telephone 781-826-3189 Fax 781-826-8915 www.hanoverdpw.org Victor J. Diniak Director of Public Works INVITATION
More informationQUALITY CLAUSE CODES
14201 Myerlake Circle 5307 Luce Avenue, Bldg 243E Clearwater, FL 33760 McClellan, CA 95652 P (727) 539-8585 F (727) 539-0316 THESE ARE IN ADDITION TO THOSE SET FORTH IN ANY DOCUMENT THAT IS PART OF THE
More information