|
|
|
- Lawrence Collins
- 6 years ago
- Views:
Transcription
1
2 INTRODUCTION 2 We are your partner for non-destructive testing in the industry branches of automotive industry, railways, power plant technology and mechanical engineering industry Business registration by Dipl.-Ing Dieter Linke and Dipl.-Ing. Eckart Rühe one of the first setting up business in Magdeburg after German reunification 1991 Formation of a limited liability company (LLC) Prüftechnik Linke & Rühe GmbH
3 3 Welcome to PLR! PLR Prüftechnik Linke & Rühe GmbH is an innovative, medium-sized business in the area of non-destructive testing, located in Magdeburg. Our portfolio extends from the classic non-destructive testing methods over the development of testing instruments and inspection systems up to the training of certified inspectors. VDA 6.2 TESTING ENGINEERING Development, Manufacturing and Service Inspection systems, testing instruments and probes according to customized requirement NDT SERVICE At metal-producing and metal-processing industry PERSONNEL QUALIFICATION According to DIN EN ISO 9712 and DIN at our DGZfP Training & Education Center Magdeburg/PLR or at your location ACCREDITED LABORATORY Manufacturer-independent verification of eddy current and ultrasonic testing instruments as well as magnetization devices
4 NDT SERVICE 4 Non-destructive testing in our laboratory or on your site 1996 PLR qualifies as Training & Education center of the DGZfP 1998 NDT service at Magdeburg Aqueduct
5 5 NDT Service We assist your quality control with our competences as accredited test laboratory in accordance with DIN EN ISO/IEC for the implementation and monitoring of manual non-destructive testings. Our high-qualified inspectors and engineers with competence certificates according to DIN EN ISO 9712 are at your disposal. We inspect your products like - Weldings (conduits, vessels, steel structures) - Steel plates - Forgings and castings - Semi-finished products Using latest testing methods and instruments - Ultrasonic testing - Radiographic testing (isotope instrument Ir 192 or SE 75, x-ray tube) - Magnetic particle testing - Penetrant testing - Eddy current testing - Visual testing directly - Visual testing indirectly (endoscopy, videoscope)
6 NDT SERVICE 6 Together we develop your multi-method and individual inspection concept according to actual technical standards 1999 Conclusion of a research and development contract with the Deutsche Bahn AG for Method development and approval of eddy current testing 2003 Start with the inspection of blast furnaces at Salzgitter AG
7 7 NDT Engineering Services - Supervision - Revision, check and creation of standards/methods instructions based on European (EN), International (ISO) or customized standards - Providing assistance for the implementation of specific working and inspection instructions as well as inspection plans - Generation of task and component specific inspection scenario - Monitoring of existing test equipment regarding the setting parameter as well as the applied methods concerning the process and procedure safety - Consulting in new acquisition of test equipment - Assistance for preparation of NDT customer audits - Realization of product and process monitoring at internal and external supplier
8 TESTING ENGINEERING 8 Manufacturing of testing instruments, probes and accessories for the equipment of non-destructive inspection systems 2005 Development of an eddy current inspection system WPG II for the classification of Head Checks 2005 PLR assumes the supervision at maintenance plants of railways
9 9 Testing instruments and probe manufacturing Concerning your complex test task, we offer you customized test equipment for your manual or automated quality control. Our qualified and motivated team develops and manufactures multi-channel testing instruments, probes and cables for the eddy current and ultrasonic inspection. The PLR s own test equipment meets, respectively surpasses, a variety of individual customer requirements of most different branch of industries for example railways, automotive industry and aerospace. The portfolio of our test equipment includes the sorting of different materials and the inspection of surface-open as well inner damages. Due to our quality management system DIN EN ISO 9001, we are committed that our products can be efficiently manufactured with high quality. Our testing instruments and probes meet the current normative requirements. We assist you in all life cycles of the test equipment. We carry out the assembly, approval, maintenance and repair of the test equipment.
10 TESTING ENGINEERING 10 Development and design of individual system solutions specially adapted to customer requirements 2006 Equipping the rail inspection trains of Deutsche Bahn AG with eddy current and ultrasonic inspection technology starts 2007 Inspection of the large rotor wing type E 126-series starts
11 11 Development and design We offer you a fitted all-in-one solution for the performance of automated inspections of NDT tasks. Your customer requirements are regularly implemented in hardware and software. Software connections to customer controls and databases are developed and implemented according to the requirements. Our software solutions simplify the processing of complex test task. Multi-lingual visualization of the user interface offers international transparency. Connections to existing industrial environment and manipulators influence the design-related realization. Provided 3D models (Inventor, Step) as well as drawings in 2D format can be applied. Additional functions can be realized by our hardware developer as well as single electronic solution or implementation of hardware-related programming (FPGA) in the test electronics.
12 TESTING ENGINEERING 12 Eddy current and ultrasonic inspection at laid rails 2011 Begin of NDT test of components for ITER research project 2012 Launch of the handheld eddy current inspection system WPG NT (New Technology)
13 13 Rail inspection systems High infrastructure, safety and availability requirements demand a continuous and effective analyse of the track state by using of non-destructive testing methods. PLR s eddy current and ultrasonic inspection systems create data, which are provided by an expert system for the rating of the rail quality or maintenance planning. The integration of automated ultrasonic and eddy current inspection systems at rail inspection trains allows the simultaneous detection and analyse of surface and volume defects. The use of automated eddy current inspection systems at reprofiling trains enables the maintenance performance as well as the proof of the successful performance of reprofiling. The handheld eddy current inspection systems developed by PLR for the one-sided and double-sided rail and switch inspection are based on the same algorithms of data recording and representation of results as used for automated rail inspection and provide compatible inspection results.
14 TESTING ENGINEERING 14 Inspection equipment for the quality assurance in the automotive and aerospace industry 2012/13 Equipping of 10 rail reprofiling machines with the PLR eddy current inspection system 2013 Equipping the rail inspection train of the Hungarian National Railway (MAV)
15 15 Automotive and aerospace Modern materials and complex geometries for the automotive and aerospace industries and their suppliers require a high degree of precision and performance to the test equipment. In addition to a high detection capability, process reliability at full utilization and intuitive operation are essential criteria. from the serial test of mass parts (rolling bearing body, valve shafts, battery contacts for electric vehicles) over temperature-independent sorting of material properties (engine bearer) to the manual crack detection at hidden test positions (helicopter engine, sprocket wheel of camshafts). The quality of components can be ensured by the equipping of automated test facility as well as handheld test instruments with PLR test technology for eddy current and ultrasonic testing. The range of test task extends
16 PERSONNEL QUALIFICATION 16 Training & Education Center for non-destructive testing in cooperation with DGZfP 2016 Launch of the WPG NT-8M, outstanding with double sided rail inspection 2017 PLR obtains the approval as testing laboratory for the execution of system verifications according to Ril A03
17 17 PLR serves in cooperation with the German Society for Non-Destructive Testing (DGZfP) the Training & Education center Magdeburg/PLR. We convey the skills and ability for many testing methods. NDT training according to DIN EN ISO Eddy current testing ET Level 1, 2 and 3 - Magnetic particle testing MT Level 1 and 2 - Penetrant testing PT Level 1 and 2 - Ultrasonic testing UT Level 1 and 2 - Visual testing VT Level 1 and 2 - Digital Radioscopy RT S Level 1 and 2 - Hardness testing HT - Recertification (Level 1 3 all methods, including RT F, RT S) - Training according to technical qualification guidelines in radiation protection - Training course and operator training Scope The Training & Education center Magdeburg is your contact as center of excellence for the training in the range of eddy current testing as well as for test assistant courses according to DIN In addition to the courses in our Training & Education Center, we offer specialized inhouse courses according to DIN EN ISO 9712 and the test assistant standard DIN in which we deal with your needs and training priorities in terms of time and content and prepare a company-specific concept for qualification measures. Our qualified lecturers train you according to the abovementioned international and national standards, which are also the basic requirements for VDA :2016 for the automotive industry.
18 ACCREDITED LABORATORY 18 Accredited laboratory according to DIN EN ISO/IEC 17025:2005 We verify manufacturer-independent your eddy current and ultrasonic instruments as well as magnetization devices The verification of characteristics is carried out by PLR as accredited laboratory according to the applicable standards. The appropriable methods are subject to the monitoring by the DAkkS. We verify eddy current and ultrasonic testing devices as well as mobile and stationary magnetization devices on site or in our laboratory. The best engineering skills of research and development guarantees a professional work.
19 Notes 19
20 PRÜFTECHNIK VDA 6.2 Contact PLR Prüftechnik Linke & Rühe GmbH Altenhäuser Straße 6, Magdeburg, Germany Fon: Fax: Internet: Imprint Published by: PLR Prüftechnik Linke & Rühe GmbH Altenhäuser Straße 6, Magdeburg, Germany Concept/Design/Layout: toolboxx-media UG, Magdeburg Text: PLR Prüftechnik Linke & Rühe GmbH, toolboxx-media UG Photo credits: Lintje KG, toolboxx-media UG, PLR Prüftechnik Linke & Rühe GmbH Coptograph, w.media Ltd, istockphoto Firstsignal, andresr, rasslava Subject to change. Date: 10/05/2017
Qualification of New Component- Specific Inspection Techniques for Turbine & Generator Service
Qualification of New Component- Specific Inspection Techniques for Turbine & Generator Service More info about this article: http://www.ndt.net/?id=22896 Hans Rauschenbach 1, Dr. Stefan Frank 1 1 Siemens
Nondestructive material testing services
NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel
Nondestructive material testing services
NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel
High-Level Lifting.
High-Level Lifting Solutions for cranes, transport systems and components for the nuclear industry Expertise in planning, manufacture, erection and commissioning www.steag-energyservices.com Crane systems,
SOLUTIONS ASSEMBLY PRODUCTION IN PIPE FORMING & WELDING COMPONENTS MADE OF HIGH-QUALITY MATERIALS
SOLUTIONS IN PIPE FORMING & WELDING ASSEMBLY PRODUCTION COMPONENTS MADE OF HIGH-QUALITY MATERIALS Piping Distribution systems Spirals Fitting kits Fluid lines Connections Fig. 1 Company premises, Nistertal
PSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE. Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5
Course: Quality Assurance Module 5 Welders/Welding personnel
Version 1.0 2010.11.02 1 of 7 Course: Quality Assurance Module 5 Welders/Welding personnel Version 1.0 2010.11.02 2 of 7 Table of Contents MODULE 5...3 Surface inspection on cracks and other surface imperfections
Innovative Technologien zur Erzeugung und Verwertung von Biogas
Großmann Ingenieur Consult GmbH Innovative Technologien zur Erzeugung und Verwertung von Biogas Offshore Technologies and Steelworks Stainless Steel and Aluminium Surface Finishing Design and Engineering
INTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION
INTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION Presentation I NDT Congo is an inspection company specialized in Non Destructive Testing of industrial equipment such as boilers, heat exchangers,
Your Guarantee of Safety and Reliability.
Contacts with a wealth of experience General Managers DEKRA Industrial: Jörgen Backersgård, Matti Andersson and Werner Bollmann. Your Guarantee of Safety and Reliability. How we put you on the safe side
ISO INTERNATIONAL STANDARD. Non-destructive testing Qualification of personnel for limited applications of non-destructive testing
INTERNATIONAL STANDARD ISO 20807 First edition 2004-03-01 Non-destructive testing Qualification of personnel for limited applications of non-destructive testing Essais non destructifs Qualification du
SUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
für Schienenfahrzeuge for railway vehicles Manufacture, repairs and service related to cardan shafts
WiCHMANN - Gelenkwellen Ihr Spezialist für Gelenkwellen in Papiermaschinen WiCHMANN - Cardan shafts für Schienenfahrzeuge for railway vehicles Manufacture, repairs and service related to cardan shafts
Additive Manufacturing Powder
Additive Manufacturing Powder Materials for the future. VDM Metals 3 Bespoke material solutions As a world market leader, VDM Metals benefits from decades of experience in the production of high-alloyed
PART 6: Visual and Optical Inspector Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
PART 3: Liquid Penetrant Inspector, Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-6 First edition 2011-04-01 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
T A I L O R - M A D E I N D U S T R I A L S O L U T I O N S
T A I L O R - M A D E I N D U S T R I A L S O L U T I O N S T A I L O R - M A D E I N D U S T R I A L S O L U T I O N S We are first and foremost a professional and motivated team serving industry. Working
(Name and address of the vehicle maintenance workshop)
Technical Assessment and Approval by VPI in Consideration of EU Reg. 445/2011 (Sub-Functions I and IV) (for freight/tank wagons based on the VPI maintenance manual) (Name and address of the vehicle maintenance
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-4 First edition 2011-04-01 Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
SECTION WELDING
SECTION 05050 WELDING PART 1 GENERAL 1.1 REFERENCES A. The following is a list of standards which may be referenced in this section: 1.2 DEFINITIONS 1. American Society of Mechanical Engineers (ASME):
CREATING THE CONTINUOUSLY WELDED TRACK TRADITION MEETS MODERNITY
CREATING THE CONTINUOUSLY WELDED TRACK TRADITION MEETS MODERNITY 2 YOUR PARTNER FOR RAILS ELEKTRO-THERMIT GMBH & CO. KG BUILDING THE FUTURE TOGETHER Rail travel has many advantages: it is fast, convenient
Special Testing Facility
Special Testing Facility OUR CUSTOMERS: TESTING CAPABILITIES: Pressure range: vacuum to 1034 bar Temperature range: -196 C to 300 C Test gasses: Helium, Nitrogen, Mixtures TYPES OF TESTS: Overpressure
Zamperla, Inc. Release Date: December 1, Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005
Ride distributed by: Bulletin No: SB-01-2018 Zamperla, Inc. Release Date: December 1, 2018 49 Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005 Supersedes: USA Completion Date: Before
Zamperla, Inc. Release Date: December 1, Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005
Ride distributed by: Bulletin No: SB-01-2018 Zamperla, Inc. Release Date: December 1, 2018 49 Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005 Supersedes: USA Completion Date: Before
Directive 97/23/EC Pressure Equipment
Directive 97/23/EC Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-6 First edition 2011-04-01 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ROUSH ESE INSPECTION PLAN
ROUSH ESE INSPECTION PLAN FIRST ARTICLE PARTS 100% inspection of all dimensions are required for ALL First Article Parts.** A First Article part or assembly with supporting documentation shall be submitted
voith.com Voith Composites Meet the Future of Carbon Fiber Composites
voith.com Voith Composites Meet the Future of Carbon Fiber Composites 2 High-Performance Fiber Composite Components Across all stages of design and production, Voith Composites develops fiber composite-based
W-09 ANCHOR CHAIN CABLES AND ACCESSORIES FOR SHIPS
Guideline No.: W-09(201510) W-09 ANCHOR CHAIN CABLES AND ACCESSORIES FOR SHIPS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical
A NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND
A NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND C O M P A N Y P R O F I L E Established in 1968. With the support of the new valve team our aim are short lead times, exemplary quality and good customer
DEVELOPMENT AND PRODUCTION OF MEDICAL DEVICES
DEVELOPMENT AND PRODUCTION OF MEDICAL DEVICES Development and production THIS IS MECHATRONIC We develop and manufacture medical technology equipment for diagnosis and therapy as well as partial solutions
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-12 First edition 2011-04-01 Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged
Expediting. Research of suppliers. Vendor Assessment. Inspection Testing. Qualification of suppliers. Inspection Audit
Research of suppliers Vendor Assessment Inspection Testing Expediting Inspection Audit Qualification of suppliers
Machine list + core competences Your contract manufacturer for mechanical engineering
Machine list + core competences Your contract manufacturer for mechanical engineering Welding Machining Coating Assembling Project management 1 We realise it - as we have for five generations! With our
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-2 First edition 2011-04-01 Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes
Application for certification for the welding of railway vehicles and components according to EN
Application for certification for the welding of railway vehicles and components according to EN 15085-2 to the manufacturer certification body GSI mbh, Düsseldorf represented by the GSI-SLV Saarbrücken
Trainee Maintenance Technician
Trainee Maintenance Technician The Trainee Maintenance Technician performs aircraft maintenance tasks under supervision, and in accordance with organisational procedures and safety precautions as specified.
We set the course for railway transportation
We set the course for railway transportation Source: Deutsche Bahn AG/Max Lautenschlaeger 2 About us As a certified manufacturer FRIEDRICH HIPPE delivers numerous components for railway infrastructure.
System Integration - Our Services
System Integration - Our Services MOBILE SOLUTIONS CONTAINER SOLUTIONS EMC-SERVICE FIBER-OPTIC-CABLE MANUFACTURING LOGISTICS AND TECHNICAL DOCUMENTATION TRAINING MOBILE SOLUTIONS The steep GmbH is specialized
SGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY
SGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY 1 AT A GLANCE Nº1 80,000 1,650 WORLD LEADER EMPLOYEES OFFICES AND LABORATORIES GLOBAL 14 SERVICE GLOBAL LOCAL INDUSTRIES
Below the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved.
Below the Surface: The Importance of Mechanical Integrity at Your Plant Introduction ERI Solutions Inc. (ERI) founded in 2003 to develop insurance markets and standards for the growing ethanol industry.
Break down of traceability or Quality Chain in Non Destructive Testing to International Standards
SINCE2011 Singapore International NDT Conference & Exhibition, 3-4 November 2011 Break down of traceability or Quality Chain in Non Destructive Testing to International Standards Sajeesh Kumar BABU * 1,
ISO Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology
INTERNATIONAL STANDARD ISO 13588 First edition 2012-10-01 Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology Contrôle non destructif des assemblages soudés Contrôle
INTEGRATED MANAGEMENT SYSTEM
INTEGRATED MANAGEMENT SYSTEM Quality Environment Health&Safety CONTENT Company 4 Integrated management system. 5 Company organizational structure 6 Process control 7 Documentation 9 Control of documents
Quality Assurance Conditions Long texts to QAC number codes
Long texts to QAC number codes 002: Delivery of parts only with up-to-date BAAINBw or RHEINMETALL approval. 088: Terms of delivery for products with limited shelf life - Minimum Shelf life of the goods
Maritime Rules Part 41: Anchors and Chain Cables
Maritime Rules Part 41: Anchors and Chain Cables ISBN 978-0-478-44746-0 Published by Maritime New Zealand, PO Box 25620, Wellington 6146, New Zealand Maritime New Zealand Copyright 2015 Part 41: Anchors
The world of the perfect drive
Assessment of the surface quality of a gear with a special digital microscope The world of the perfect drive ABM is one of the leading international suppliers of sophisticated, high-performing drive solutions
APPARATUS CONSTRUCTION
APPARATUS CONSTRUCTION SCHRADER implements customized apparatus at the highest technical standard and in compliance with the most important standards and regulations in force worldwide. Schrader apparatus
Quality Management (QM)
www.kem-kueppers.com Quality Management (QM) QM Manual Certified according to DIN EN ISO 9001 2 Quality Management System Quality Management System 3 KEM Quality Policy The best possible quality is our
Certification according DIN 6701
Certification according DIN 6701 April 2017 / New series of standard DIN 6701 (issued 2015) In case of further questions please contact: Frank Stein Head of Certification Body TBB Cert Wiener Str. 12 28359
The Probe KK&S INSTRUMENTS - July / September 2011 Issue
The Probe - July / September 2011 Issue In this issue: Feritscope - Accurate Ferrite Content meter LED - UV Inspection Light Special - MPI Consumables News - DataCentre Software launch Application - ECHOMETER:
Testing Calculation Assessment
Testing Calculation Assessment Worldwide Services for the highest levels of safety, availability and cost effectiveness of systems and components >>> www.siempelkamp-dresden.com Siempelkamp On the move
Electronic Multishot System (EMS)
1 Electronic Multishot System (EMS) Drilling Equipment Made in Germany www.micon-drilling.de Phone +49. 51 44. 49 36 0 MICON-Drilling GmbH Im Nordfeld 14, 29336 Nienhagen, Germany www.micon-drilling.de
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
QUALITY CONTROL MANUAL
QUALITY CONTROL MANUAL Page 1 of 10 TABLE OF CONTENTS CONTENTS PAGE General Information 3 Statement of Policy and Authority 3 Control of the QC Manual (Section I) 4 Responsibility of Key Personnel (Section
CONVEYING PIECE GOODS SPECIAL PLANTS AND DEVICES SERVICES MINDA TANGERMÜNDE
CONVEYING PIECE GOODS SPECIAL PLANTS AND DEVICES SERVICES MINDA TANGERMÜNDE 02 MINDA TANGERMÜNDE 03 TECHNOLOGY AND TEAM SPIRIT: MINDA TANGERMÜNDE Since 1992 MINDA has manufactured innovative and customer-specific
Asset Integrity Services. A commitment to excellence in Non-Destructive Testing & Inspection.
Asset Integrity Services. A commitment to excellence in Non-Destructive Testing & Inspection. w w w. A p p l u s R T D. c o m This brochure is about the world of Applus RTD Its clients Its solutions Its
SIJ Ravne Systems is a member of SIJ Slovenian Steel Group.
FORGED ROLLS The SIJ Group is the largest Slovenian vertically integrated Slovenian metallurgical Group and one of the largest producers of stainless and special steels in Europe. The SIJ Group consists
Overview of Non-Destructive Testing and Inspection Course Syllabus
Overview of Non-Destructive Testing and Inspection Course Syllabus This course reviews the general principles of seven non-destructive testing methods and their derivative techniques The following class
Audit questions for DB Audit Tool Version 4.00
Pos. Audit questions Management 1 How is your company organised? 2 Present the company and explain responsibilities. What strategic orientations are in place and are being pursued? 3 What manufacturing
We take care of it. Company Manual
We take care of it. Company Manual Quality Management System based on ISO 9001:2015 1. COMPANY POLICY...3 1.1. Company Mission Statement...3 1.2. Company Quality...3 2. PRODUCTS AND SERVICES...4 3. ORGANISATION...6
WiCHMANN - Cardan shafts Made in Germany. Manufacture, repairs and service related to cardan shafts. Leistung, die bewegt
WiCHMANN - Cardan shafts Made in Germany Manufacture, repairs and service related to cardan shafts Leistung, die bewegt The family business Our oldest tradition is called: Innovation. The family-run business
INSTRUCTIONS FOR THE MANUFACTURE AND THE INSPECTION OF WELDED STEEL ASSEMBLIES
INSTRUCTIONS FOR THE MANUFACTURE AND THE 1. OBJECT AND FIELD OF APPLICATION 3 2. SUPPLIER 3 3. SUBCONTRACTING 3 4. WELDING 4 4.1 Welding documentation 4 4.2 Welding procedure specifications (WPS) 4 4.3
We provide more than just impulses. PINTSCH TIEFENBACH.
We provide more than just impulses. PINTSCH TIEFENBACH. Company Individual solutions for railway traffic 2 As a supplier of hydraulic components, proximity switches and sensors, our company, founded in
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-10 First edition 2011-04-01 Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded)
Quality Management (QM)
www.kem-kueppers.com info@kem-kueppers.com Quality Management (QM) QM Manual Certified according to DIN EN ISO 9001 2 Quality Management System KEM Quality Policy The best possible quality is our top business
SUPPLIER EVALUATION CHECKLIST
SUPPLIER EVALUATION CHECKLIST 5675 West Burlingame Rd. Tucson AZ 85743 Phone: 520.744.1000 Date: Vendor: Address: City, State, Zip: Web Site: Prepared by: Telephone: Fax: Email: Key Company Personnel Name
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13535 First edition 2000-12-15 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment Industries du pétrole et du gaz naturel Équipements de
a. Are the foundry s employees trained and familiar with portions of the system applicable to their position?
NAV 29 FOUNDRY OPERATIONS 1. Does the foundry have a documented quality system? a. Are the foundry s employees trained and familiar with portions of the system applicable to their position? b. What recognized
Monolithic Isolation Fittings
Monolithic Isolation Fittings The ElectroStop TM monolithic isolation fittings will serve as a positive leak proof, long lasting block against the flow of electric current in all piping systems. When you
Seifert x cube series Versatile 2D and 3D X-ray system built for speed.
GE Inspection Technologies Seifert x cube series Versatile 2D and 3D X-ray system built for speed. gemeasurement.com/x-ray x plore production CT line Make important production decisions faster. GE is revolutionizing
USM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication
GE Measurement & Control NEW USM Vision 1.2 A Total Weld Inspection Solution to Increase Productivity in New Process Pipework Fabrication 16/128 Parallel scanning Linear scan More channels Introduction
QUALITY AGREEMENT. 1. ISKRA MEHANIZMI, d.o.o., Lipnica 8, 4245 Kropa, Slovenia, represented by its Managing Director Dr.
QUALITY AGREEMENT concluded between 1. ISKRA MEHANIZMI, d.o.o., Lipnica 8, 4245 Kropa, Slovenia, represented by its Managing Director Dr. Marjan Pogačnik (hereinafter referred to as: Customer) and 2. xxx
ASME VIII DIVISION 1 PRESSURE VESSEL CODE SIMPLIFIED
LAST UPDATED 18-01-2018 ASME VIII DIVISION 1 PRESSURE VESSEL CODE SIMPLIFIED COURSE DURATION: 4 DAYS Master the best practices of ASME Pressure Vessel Fabrication Code to reduce costs, improve plant reliability
PTA WELDING SYSTEMS.
PTA WELDING SYSTEMS www.deloro.com 2 WORLD-CLASS PTA WELDING SYSTEMS BY DELORO HETTIGER WELDING Deloro Group is a leading global manufacturer and provider of innovative metallic wear and corrosion protection
Efficient maintenance: Monitoring the infrastructure using regularly scheduled trains
Efficient maintenance: Monitoring the infrastructure using regularly scheduled trains for track system and vehicles continuous condition monitoring reliable forecasting higher quality operations DB Systemtechnik
ACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS
ACCREDITATION OF MANUFACTURERS OF BOILERS & PRESURE VESSELS [Not applicable to ASME Sec. IV, Cast Iron and Aluminum Boilers, ASME Sec. VIII Div 1, UG-90 (c) (2) and Graphite Vessels, ASME Sec. VIII, Div.
> 50 YEARS OF EXPERIENCE > 12,500 EMPLOYEES A NEW PATH TO GROWTH TRANSPORTATION SYSTEMS SOFTWARE SAFETY GLOBAL ENGINEERING SERVICES
IN > 20 COUNTRIES > 50 YEARS OF EXPERIENCE > 12,500 EMPLOYEES INTERNATIONAL NETWORK OF EXPERTISE A NEW PATH TO GROWTH WWW.ASSYSTEM-GERMANY.COM TRANSPORTATION SYSTEMS SOFTWARE SAFETY GLOBAL ENGINEERING
Training. management of Training Training centers Consulting Integrated Training Services
Training management of Training Training centers Consulting Integrated Training Services This way ahead Training at steep The steep GmbH is a service company that is specialised on individual, innovative
$+.(+0)'4 /#5%*+0'0$#7 )/$* %1 -) THE ART OF EXCELLENCE
$+.(+0)'4 /#5%*+0'0$#7 )/$* %1 -) THE ART OF EXCELLENCE #JMƀOHFS.BTDIJOFOCBV (NC) $P,( The Art of Excellence /#%*+0'4; #0& #22#4#675 '0)+0''4+0) (41/ 674$+0' 4700'45 61 %*'/+%#. 4'#%6145 Large, Heavy,
Innovative Temperature Measurement in Heat Treatment Processes
Thermo Sensor GmbH Carl-Zeiss-Straße 1 59368 Werne Germany Tel.: +49 2389-40200-0 Fax: +49 2389-40200-99 www.thermo-sensor.de info@thermo-sensor.de Innovative Temperature Measurement in Heat Treatment
Supplier self-information
Page 1 of 5 GENERAL INFORMATION General corporate data Address: Legal form: Homepage: V.A.T. Registration No.: Group membership: Subsidiary companies: Ownership: Line of business: Contact person Name Phone
MEC-QW-E-2005 QA/QC Manager PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
104727-MEC-QW-E-2005 QA/QC Manager Holds a B. Sc. in Metallurgical & Materials Science Engineering and is well-qualified in QA/QC Welding engineering with more than 11 years of experience in fabrication
Kaye Product Line Calibration and Maintenance Service Solutions Rental
Kaye Product Line Calibration and Maintenance Service Solutions Rental Amphenol Advanced Sensors EUROPE Value-added services that enhance your productivity Your Validation and Monitoring equipment is
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
COMPANY PROFILE PRODUCT PORTFOLIO MARKET SEGMENTS / REFERENCES CONTACT WELDED PARTS
CASTINGS FORGINGS COMPANY PROFILE PRODUCT PORTFOLIO MARKET SEGMENTS / REFERENCES CONTACT WELDED PARTS METALLURGICAL AND ENGINEERING GROUP COMPANY PROFILE TRADITION - QUALITY - FLEXIBILITY Year of foundation:
Quality Procedure QP320 Supplier Management
1. PURPOSE 1.1. This procedure outlines the process for management of suppliers including assessment, classification, risk mitigation, and maintenance of their approval status. 2. SCOPE 2.1. This procedure
QUALIFICATION OF ULTRASONIC INSPECTIONS IN THE ITER VACUUM VESSEL MANUFACTURING PROJECT
QUALIFICATION OF ULTRASONIC INSPECTIONS IN THE ITER VACUUM VESSEL MANUFACTURING PROJECT R. Martínez-Oña, A. García, M.C. Pérez, Tecnatom, Spain; G. Pirola, Ansaldo Nucleare, Italy ABSTRACT The vacuum vessel
ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
INTERNATIONAL STANDARD ISO 17643 First edition 2005-07-01 Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis Contrôle non destructif des assemblages soudés Contrôle
Practice on NDE Licensing and Inspection Qualifications for Nuclear Power Plant In-service Inspections
18 th World Conference on Nondestructive Testing, 16-20 April 2012, Duban, South Africa Practice on NDE Licensing and Inspection Qualifications for Nuclear Power Plant In-service Inspections Jinhong LIU,
Dear Ladies and Gentlemen,
Dear Ladies and Gentlemen, We, ITD GmbH, have set the objective to develop, produce and market products that belong to the world leaders in innovation, technology and design. As specialist for stationary
econ Bloomfield, CT Facility South Windsor, CT Facility
B econ Incorporated, founded in 1966 is a dynamic and innovative company that has been designing and manufacturing a wide variety of engineered control systems, test stands, automatic process equipment,
www.niagara-testing.com XYZ Mining Company XYZ Mine SAG Mill Gear Nondestructive Testing Report and Summary Provided by: Niagara Testing West Corporation Tucson, Arizona 85737 Steven Jacobs, Cell (520)
CSI HISTORY AND CAPABILITIES
PHONE: 704-644-5000 FAX: 704-588-3039 WEB: www.csiheat.com CSI HISTORY AND CAPABILITIES CONTENTS: History Key Personnel Facilities and Equipment Engineering and Technical Services Support Design and Contract
Looking sharp at your assets
Looking sharp at your assets A longer life The stands for Quality The consists of three specialised operating companies with their own divisional structure. Material testing, inspection and corrosion prevention
Industrial Diagnostics Soundness you can count on ---
Industrial Diagnostics Soundness you can count on --- The Challenge Sound steel for modern structures Typically, steel products must fulfill a number of requirements. Whether semi-finished products for
GOODWIN. Nozzle Check Valves
GOODWIN Nozzle Check Valves N-ZK N-ZSK N-B N-BK - The International Company International, the established market leader in the design, manufacture and supply of Dual Plate Check Valves for use in the
Our Ref. April 28, 2005 Page 1/9. 1. Introduction References Certification... 4
April 28, 2005 Page 1/9 Table of Contents 1. Introduction... 2 2. References... 3 3. Certification... 4 4. Procedures... 5 4.1 Management responsibility... 5 4.1.1 Quality Policy... 5 4.1.2 Responsibility...