Nondestructive material testing services
|
|
- Alyson Thompson
- 6 years ago
- Views:
Transcription
1 NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel (Hanover), we provide a wide range of nondestructive testing services. Accredited acc. to DIN EN ISO/IEC ISO 9001 and EN 9100 certified Rolls-Royce approval acc. to RRP58001, EL 2153 (1000 Gates Method) MTU approval
2 Nondestructive material inspection Support for all issues of quality assurance with our NDT services Your partner for quality assurance As a service provider we offer you a wide range of nondestructive material testing methods at your site or in our test centre in Burgwedel (Hanover). VOGT Ultrasonics is accredited acc. to DIN EN ISO/IEC and certified acc. to EN 9100 and ISO Conventional nondestructive material testing Due to our extensive service portfolio in the field of conventional nondestructive material testing we are able to use the best inspection method and solution for your inspection task. This includes : With our scanning-systems in combination with our customerspecific and adaptable data evaluation software we are able to detect smallest material defects, visualize them, analyse them and generate an informative and clear documentation. The results include a report with all important information for the ongoing production stages, further operation of the components, determination of new inspection deadlines and particularly for the observation of damage trends and erosion progress. Visual inspection Surface crack testing, crack depth measurement, hardness testing Mechanized ultrasonic inspection with mobile scanners Digital radiography Dimensional inspection during production or receipt of goods Elaboration of inspection concepts and specifications Training for inspection processes, equipment and system handling Supervision for welding- and inspection processes and construction and much more We perform one-time or periodic nondestructive inspections of components from various industry sectors in different production levels. Fig.: surface crack testing with the dye penetrant testing method Fig.: residual wall thickness measurement in power plants, chemical and petrochemical assets Fig.: spotweld inspection in the automotive industry
3 Rental and personnel leasing of VOGT inspection personnel We support you with our certified inspection staff (EN 473, ISO EN 9712, EN 4179) at your site. You decide: choose between the assignment as a service contract or as personnel leasing. We help you during peak periods and support you during holiday- and sickness periods. Outsourcing of your quality assurance We are your partner for the complete adoption of quality assurance tasks, carried out by outsourcing the nondestructive material testing work field to our competent inspection personnel in our test centre or at your site. Inspection of incoming and outgoing goods In the field of complex end products, where lots of single components are necessary, we support you with the inspection of the incoming vendor parts, the inspection of the parts manufactured by your company and the final inspection of the end product prior to delivery. These inspections include tests for completeness, possible damages, dimensionality, testing of the material, the hardness and surface quality as well as the checking of the provided documentation for completeness and validity. In addition, we also accompany you through external inspections performed by an authorised Inspection Agency and we ensure its correct execution. Testing and welding supervision We can provide welding specialists, technical experts approved to German pressure vessel standards or a level III supervisor at EN 473 or EN 4179 for all of your examinations, reconstructions or new constructions of pipelines. Fig.: ultrasonic inspection based on hydrogen induced corrosion cracks
4 Nondestrutive material inspection Support for all issues of quality assurance with our NDT services On-site building inspection With pipeline construction in conventional and nuclear systems as well as in the oil and gas industry, we provide qualified personnel to check the incoming goods. We also prepare the preliminary examination documents and monitor the execution of the work during the installation of the components through to completion of all documentation. Special tests We also offer non-commonplace inspections in the quality assurance and periodic component supervision. Fig.: construction supervision of pipelines This includes: Material mix tests and sorting of materials Coat thickness measuring to identify the thickness of lacquer, enamel, plastic or other coverings on iron and nonferrous base materials Measurement of crack depths in the material Ultrasonic inspection of trend growth of hydrogen induced cracks in pipelines, pressure vessels or steel samples (HIC-inspection) Measurement of hardness and much more Trainings VOGT Ultrasonics offers customer-, operator- or system specific trainings for a safe and efficient handling with the ultrasonic technique: Fig.: dimensional inspection during receipt Hints for the correct inspection execution Environmental influences on inspection results Sound field determination and periodic supervision Probe selection System parametrization and systematic work Professional execution of maintenance- and service jobs and much more Fig.: training of ultrasonic inspection using an immersion inspection system at VOGT Ultrasonics
5 Fig.: preventive ultrasonic inspection searching for cracks and volumetric defects at a bridge girder
6 Nondestructive material inspection Automated ultrasonic inspection in our test centre Outsourcing - We can take over your single- and serial inspection We are able to adopt complete areas of your quality assurance for long-term periods. With our extensive and full-power ultrasonic inspection system plant we are flexible to assist you with different methods for single- and serial inspections of your components. Turbine disks, gear wheels, differentials, valves, bearing rings, pipes, rods, sheets and CFRP-components are just some examples of our outstanding inspection spectrum. Production accompanying automated ultrasonic inspection We take over long-term as well as short-term operations fast and safe in our test centre. If needed a 3 shift inspection is available. Due to the automation of scan processes, it is possible to test complex, rotationally symmetrical or plane parts as well as other forms on an automated basis and with only little personnel expenditure. Once set ultrasonic parameters as well as the scan resp. probe positions are memorized in the integrated computer of the testing system and they are immediately available for repeated testing. So a new and expensive setting of the testing system is not required. Testing of serial part batches at different times can be carried out quickly without any problems and at low cost. Advantages of the automated inspection using ultrasound In opposite to other nondestructive material testing methods, the volumetric ultrasound inspection with vertical and other various beam angles offers an exact localization of material faults. This allows the so called multizone-inspection. It enables an optimal fault resolution in different component depths. With our high performance immersion inspection systems we are able to detect material faults from a size of only 0.1mm (depending on the material). With scanning on the surface, surface near defects can already be detected of 0.2 mm underneath the surface. Hereby, potential faults are located and will be indicated in the inspection report with an optional A-, B-, C- or D-Scan. Using the high frequency mode, small defects and first indications of material weakening, for example WEC (White Etching Cracks), can be precisely localized. Using conventional immersion technique these defects could only be detected in progressed status. Fig.: Hall A of the VOGT test centre in Burgwedel (Hanover)
7 Production accompanying automated ultrasonic inspection at your site The complete ultrasonic immersion system may - if reasonable - be installed at your site for a prearranged period and be operated locally by our service personnel. Thus complex multi-axis testing systems may be installed at any place within only few days for carrying out medium-term service jobs. By having the testing systems as well as the personnel available locally at the customer s premises, the testing is carried out without further incurance of transport costs for parts or time consumption. Fig.: Automated ultrasonic inspection in immersion technique Feasibility Studies Due to our professional competence and experience in the fields of mechanised and automated material testing, we are a strong partner for you at analysing the testability of components, creating inspection concepts or selecting or planning inspection systems, which are suitable for your applications. Our feasibility studies have helped to work out the appropriate testing method for many customers. These studies can be final tests in production, serial inspections or lot testings on a random basis. A one-off test of e.g. a prototype allows us to detect material defects for future serial inspections at an early stage of development to support the prototype s development progress in a positive way and to eliminate eventual production problems for further production. Fig.: serial part inspection of forgings and castings, e.g. bearing rings and turbine disks Fig.: C-Scans: presentation evaluation of inspection results for the customer
8 At your service since 1983 Our experience for your certainty Innovative ultrasonic technology is the key to reliable and fast material inspection in production and laboratory. With future-oriented ultrasonic technologies and processes, as well as a comprehensive range of inspection services, we are your partner for nondestructive material testing. We develop and produce high-performance ultrasonic inspection devices and systems for inline and offline inspection as well as OEM solutions and modernize old inspection systems with the latest ultrasonic technology. Furthermore we are sales partner of well-known manufacturers and technology partner of renowned companies. On this basis, we realize your ideal inspection solution according to your requirements and wishes. At your site or in our test centre in Burgwedel (Hanover), we provide all conventional nondestructive inspection services as well as mechanized and automated ultrasonic inspection solutions. VOGT Ultrasonics GmbH Ehlbeek 15 D Burgwedel Tel Fax contact@vogt-ultrasonics.de Being a medium-sized company with short decision paths, we are able to adapt the requirements of our customers competent and reliable. We not only have the very best technical ressources and qualifications, we take on your request with passion, great care and a high sense of responsibility. Applications Automated and mechanized inspection of:. Metal- and composite materials. Forged and casted parts. Optical fiber and carbon fiber reinforced components. Weld seams and bonded joints. Aircraft wings and tail sections. Rocket boosters. Aircraft turbines. Steel- and plastic pipes. Pressure vessels and pipelines. Railroad wheel sets and rails. Spot welds in the automotive industry. and many more VOGT is accredited acc. to DIN EN ISO/IEC as well as ISO 9001 and certified acc. to EN accredited as independent test laboratory acc. to DIN EN ISO / IEC certified acc. to ISO 9001:2008 / EN 9100:2009 Product names and trademarks are the respective owners property. Subject to technical alternations. (Edition: NDT Services 1707)
Nondestructive material testing services
NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel
More informationPROline USB Ultrasonic Testing Instrument and Systems
18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa PROline USB Ultrasonic Testing Instrument and Systems Göran Vogt VOGT Ultrasonics GmbH, Burgwedel, Germany, g.vogt@vogt-ultrasonics.de
More informationwww.plr-magdeburg.com INTRODUCTION 2 We are your partner for non-destructive testing in the industry branches of automotive industry, railways, power plant technology and mechanical engineering industry.
More informationULTRASONIC INSPECTION DEVICE
PROLINE USB ULTRASONIC INSPECTION DEVICE Multi-channel, imaging inspection device for the conventional ultrasonic testing - mechanized, automated I immersion technique or bubbler technique - automated,
More informationNon-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 17640 Third edition 2017-10 Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment Essais non destructifs
More informationISO INTERNATIONAL STANDARD. Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
INTERNATIONAL STANDARD ISO 17640 Second edition 2010-12-15 Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment Contrôle non destructif des assemblages soudés
More informationQualification of New Component- Specific Inspection Techniques for Turbine & Generator Service
Qualification of New Component- Specific Inspection Techniques for Turbine & Generator Service More info about this article: http://www.ndt.net/?id=22896 Hans Rauschenbach 1, Dr. Stefan Frank 1 1 Siemens
More informationISO Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology
INTERNATIONAL STANDARD ISO 13588 First edition 2012-10-01 Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology Contrôle non destructif des assemblages soudés Contrôle
More informationSOLUTIONS ASSEMBLY PRODUCTION IN PIPE FORMING & WELDING COMPONENTS MADE OF HIGH-QUALITY MATERIALS
SOLUTIONS IN PIPE FORMING & WELDING ASSEMBLY PRODUCTION COMPONENTS MADE OF HIGH-QUALITY MATERIALS Piping Distribution systems Spirals Fitting kits Fluid lines Connections Fig. 1 Company premises, Nistertal
More informationwww.gete-ndtjordan.com OUR SERVICES With this association, we are able to provide testing and Inspection service in all kind of Non- Destructive Testing for Oil and Gas industries. Including exploration,
More informationIndustrial Diagnostics Soundness you can count on ---
Industrial Diagnostics Soundness you can count on --- The Challenge Sound steel for modern structures Typically, steel products must fulfill a number of requirements. Whether semi-finished products for
More informationAutomated Inspection of Complex Composite Components in the Production Cycle
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Automated Inspection of Complex Composite Components in the Production Cycle Albrecht MAURER 1, Wolfgang HAASE 1, Rudolf
More informationQUALIFICATION OF ULTRASONIC INSPECTIONS IN THE ITER VACUUM VESSEL MANUFACTURING PROJECT
QUALIFICATION OF ULTRASONIC INSPECTIONS IN THE ITER VACUUM VESSEL MANUFACTURING PROJECT R. Martínez-Oña, A. García, M.C. Pérez, Tecnatom, Spain; G. Pirola, Ansaldo Nucleare, Italy ABSTRACT The vacuum vessel
More informationIPSCO Research & Development Center. Commercial Testing Capabilities
IPSCO Research & Development Center Commercial ing Capabilities A Wide Range of ing IPSCO s 70,000 square foot Research & Development Center combines the most advanced virtual and physical testing equipment
More informationRolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5
More informationPART 3: Liquid Penetrant Inspector, Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationYour Guarantee of Safety and Reliability.
Contacts with a wealth of experience General Managers DEKRA Industrial: Jörgen Backersgård, Matti Andersson and Werner Bollmann. Your Guarantee of Safety and Reliability. How we put you on the safe side
More informationSGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY
SGS IS THE WORLD S LEADING INSPECTION, VERIFICATION, TESTING AND CERTIFICATION COMPANY 1 AT A GLANCE Nº1 80,000 1,650 WORLD LEADER EMPLOYEES OFFICES AND LABORATORIES GLOBAL 14 SERVICE GLOBAL LOCAL INDUSTRIES
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationPSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE. Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE
More informationExperience with Advanced NDT Methods in Turbine Field Service
19 th World Conference on Non-Destructive Testing 2016 Experience with Advanced NDT Methods in Turbine Field Service Hans RAUSCHENBACH 1, Michael OPHEYS 1 1 Siemens AG Energy Sector, Mülheim a. d. Ruhr,
More informationTesting Calculation Assessment
Testing Calculation Assessment Worldwide Services for the highest levels of safety, availability and cost effectiveness of systems and components >>> www.siempelkamp-dresden.com Siempelkamp On the move
More informationElement C6.2 Generic Hazards and Modes of Failure
.2 Generic Hazards and Modes of Failure Common Machinery Hazards Procedures / permits Consider Operation Maintenance Cleaning Common Machinery Hazards Drills Entanglement Poorly guarded drive pulleys Chuck
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-6 First edition 2011-04-01 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationAll definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
More informationMachine list + core competences Your contract manufacturer for mechanical engineering
Machine list + core competences Your contract manufacturer for mechanical engineering Welding Machining Coating Assembling Project management 1 We realise it - as we have for five generations! With our
More informationAdditive Manufacturing Powder
Additive Manufacturing Powder Materials for the future. VDM Metals 3 Bespoke material solutions As a world market leader, VDM Metals benefits from decades of experience in the production of high-alloyed
More informationNondestructive Testing
Nondestructive Testing Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Nondestructive inspections fundamentals Classification of nondestructive inspections Radiographic inspection Magnetic particle
More informationAll definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
More informationASTM Volume 03.03, October 2017 Nondestructive Testing (E94 E2373)
Table of Contents 1 E94-04(2010) Standard Guide for Radiographic Examination 2 E114-15 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing 3 E125-63(2013) Standard Reference Photographs
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment Essais non destructifs
More informationTrainee Maintenance Technician
Trainee Maintenance Technician The Trainee Maintenance Technician performs aircraft maintenance tasks under supervision, and in accordance with organisational procedures and safety precautions as specified.
More informationNEW SOUTH WALES TECHNICAL AND FURTHER EDUCATION COMMISSION
NEW SOUTH WALES TECHNICAL AND FURTHER EDUCATION COMMISSION ULTRASONIC TESTING NSW Module Number: Implementation Date: 1142A 01-Jan-1995 National Module Code: EA613 MANUFACTURING AND ENGINEERING MECHANICAL
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Qualification of personnel for limited applications of non-destructive testing
INTERNATIONAL STANDARD ISO 20807 First edition 2004-03-01 Non-destructive testing Qualification of personnel for limited applications of non-destructive testing Essais non destructifs Qualification du
More informationGuidelines for the Construction of Pressure Vessel Type Tanks Intended for the Transportation of Anhydrous Ammonia at Ambient Temperatures
(1992) (1992/Corr.) Guidelines for the Construction of Pressure Vessel Type Tanks Intended for the Transportation of Anhydrous Ammonia at Ambient Temperatures 1. Scope 1.1 These Guidelines complement the
More informationT A I L O R - M A D E I N D U S T R I A L S O L U T I O N S
T A I L O R - M A D E I N D U S T R I A L S O L U T I O N S T A I L O R - M A D E I N D U S T R I A L S O L U T I O N S We are first and foremost a professional and motivated team serving industry. Working
More informationSPE MS. Copyright 2015, Society of Petroleum Engineers
SPE-177570-MS EVO Series 1.0 - Latest Generation of UT Crack and Corrosion Tools For High Speed Pipeline Inspection T. Hennig, NDT Global Corporate Ltd.; G. Lokwani, NDT Middle East Copyright 2015, Society
More informationAlways a strong partner!
Always a strong partner! Component development and consulting service Rapid prototyping Tool construction Tool and mold construction Series production Finishing and mounting of component assemblies Headquarters
More informationPride Pace Passion. Aerospace Defence Marine Power Generation Nuclear
Pride Pace Passion Aerospace Defence Marine Power Generation Nuclear Fully integrated precision manufacturing and assembly solutions Bromford Industries is a privately owned enterprise trading on a global
More informationThe ultrasonic examination and monitoring of austenite welds of stainless steel pipelines at Russian Nuclear Power Plants.
The ultrasonic examination and monitoring of austenite welds of stainless steel pipelines at Russian Nuclear Power Plants. V.G. Badalyan, A. K. Vopilkinе Scientific and production center Echo+, Russia,
More informationResearch and Development on NDE field
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD Research and Development on NDE field IAEA Technical Meeting on the Optimization of Non-Destructive Examination and In-Service Inspection to Improve Nuclear
More informationState Of Art in Ultrasonic Spotweld Testing Offline & Inline New Materials and Coatings
ECNDT 2006 - Th.3.4.5 State Of Art in Ultrasonic Spotweld Testing Offline & Inline New Materials and Coatings Göran VOGT, Dirk RIEGER, Carsten KÖHLER, Vogt Werkstoffprüfsysteme, Burgwedel, Deutschland
More informationISO INTERNATIONAL STANDARD. Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
INTERNATIONAL STANDARD ISO 17643 First edition 2005-07-01 Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis Contrôle non destructif des assemblages soudés Contrôle
More informationLaboratory Accreditation Programmes
Laboratory Address PO Box 15120, Aranui, Christchurch, 8643 19 Helanca Avenue, Wainoni, Christchurch, 8061 Telephone 03 381-1670 Fax 03 381-1690 URL Authorised Representative Client No. 1644 Programme
More informationInspection of Friction Stir Welds using Triple Array Methods
More Info at Open Access Database www.ndt.net/?id=16618 Inspection of Friction Stir Welds using Triple Array Methods Barend van den Bos 1, Sara Axelsson 1, Ulf Ronneteg 2, Thomas Grybäck 2 1 Exova Materials
More informationDevelopment and validation of an automated ultrasonic system for the non-destructive evaluation of welded joints in thermoplastic storage tanks
Development and validation of an automated ultrasonic system for the non-destructive evaluation of welded joints in thermoplastic storage tanks Abstract Malcolm Spicer, Fredrik Hagglund and Mike Troughton,
More informationNON-DESTRUCTIVE EVALUATION OF CLOSE DIE FORGED MAIN BODY OF PRIMARY SYSTEM VALVES
Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation NDE 2011, December 8-10, 2011 NON-DESTRUCTIVE EVALUATION OF CLOSE DIE FORGED MAIN BODY OF PRIMARY SYSTEM VALVES PK Sharma
More informationCorrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries
Corrosion Resistant Bolting for Use in the Petroleum and Natural Gas Industries API SPECIFICATION 20F FIRST EDITION, XXX 201X 1 1. Scope 1.1 Purpose This API specification specifies requirements for the
More informationNONDESTRUCTIVE EVALUATION:
NONDESTRUCTIVE EVALUATION: USING BREAKTHROUGH TECHNOLOGY TO ENSURE FIRST-TIME QUALITY NDE 17 QUAL TESTNG THE EVOLUTION OF NONDESTRUCTIVE EVALUATION Over the years, nondestructive evaluation (NDE) has played
More informationThe Global Leader in Precision Parts
The Global Leader in Precision Parts Welcome to Century Specialties Company Overview Headquartered in Traverse City, MI, Century, Inc. is a privately held precision manufacturing company. Comprised of
More informationThe Leader in Eddy Current Testing Performance Developer of the revolutionary MWM-Array Eddy Current Technology
The Leader in Eddy Current Testing Performance Developer of the revolutionary MWM-Array Eddy Current Technology 2011 JENTEK Sensors, Inc 1 JENTEK S INNOVATIVE PRODUCTS Eddy Current Testing (ET) Instruments
More informationINSULATED JOINTS. Monolithic Joints for Electrically Isolating Pipelines
INSULATED JOINTS Monolithic Joints for Electrically Isolating Pipelines INSULATED JOINTS TUBE TURNS INSULATED JOINTS are a pre-fabricated, non-separable, union used to isolate specific sections of pipelines
More informationIndustry solutions. Your partner for business solutions in production Heidelberg Industry.
Industry solutions Your partner for business solutions in production Heidelberg Industry. World leader. Our portfolio. Heidelberg is known internationally for building state-ofthe-art printing presses
More informationPART 6: Visual and Optical Inspector Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationOptimizing your hydro power plant
Optimizing your hydro power plant A history of engineering excellence With over 180 years of engineering excellence, Wärtsilä is a global leader in advanced technologies and complete lifecycle solutions
More informationINTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION
INTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION Presentation I NDT Congo is an inspection company specialized in Non Destructive Testing of industrial equipment such as boilers, heat exchangers,
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment
More informationIn-Line Inspection using Ultrasonic Technology
In-Line Inspection using Ultrasonic Technology Dr. Thomas Hennig NDT Global GmbH & Co KG Friedrich List Str. 1 76297 Stutensee Germany Jason Chan NDT Global Tampines Industrial Park A Tampines Street 93
More informationSECTION METAL WELDING
SECTION 05222 - METAL WELDING PART 1 - GENERAL 1.01 SECTION INCLUDES A. Welding Rod/Electrodes B. Stud Shear Connectors C. Shop Welding D. Inspections and Tests by the Contractor E. Inspections and Test
More informationSAMPLING AND RISK ASSESMENT METHOD FOR METALLURGICAL INSPECTION OF PIPES AND TANKS
SAMPLING AND RISK ASSESMENT METHOD FOR METALLURGICAL INSPECTION OF PIPES AND TANKS M. Brochu 1, F. Lefebvre 1, and B. Godin 1 1 XperX inc., Montréal, Canada Abstract: This paper gives a general overview
More informationMechanical Engineering Solutions from Concept to Delivery
Mechanical Engineering Solutions from Concept to Delivery Making our customers lives easier Proven Background of Excellence in Engineering Fort Vale Nuclear Ltd offers a wide range of mechanical engineering
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-6 First edition 2011-04-01 Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
More informationMATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
More informationEMS Electronic Manufacturing Services Excellence in quality and reliability.
EMS Electronic Manufacturing Services Excellence in quality and reliability www.rafi.de 2 RAFI ELECTRONIC MANUFACTURING SERVICES CUSTOMER BENEFITS WE PROTECT YOUR GOOD REPUTATION RAFI is an owner-managed
More informationIIW COMMISSION VC ULTRASONICALLY BASED WELD INSPECTION E. Sjerve IRISNDT, Edmonton, Alberta, Canada.
IIW COMMISSION VC ULTRASONICALLY BASED WELD INSPECTION E. Sjerve IRISNDT, Edmonton, Alberta, Canada. Abstract: The IIW is an active organization in the area of weld based topics. Within a structure of
More informationLooking sharp at your assets
Looking sharp at your assets A longer life The stands for Quality The consists of three specialised operating companies with their own divisional structure. Material testing, inspection and corrosion prevention
More informationEnhanced Inspection Capability for Specific Applications using phased array ultrasonics
Malaysia NDT Conference November 2015 Enhanced Inspection Capability for Specific Applications using phased array ultrasonics Fredrik Hagglund Channa Nageswaran Lu Zhao John Rudlin Content Plastic Pipe
More informationNondestructive Characterization and Quality Control of Lightweight Materials and Assemblies (Advanced Joining Technologies)
Nondestructive Characterization and Quality Control of Lightweight Materials and Assemblies (Advanced Joining Technologies) R&D and Applications in Automotive and Transport Industry Prof. Dr. Bernd Valeske
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationIMA Materialforschung und Anwendungstechnik GmbH. Test before you depart
IMA Materialforschung und Anwendungstechnik GmbH Test before you depart 2 Three test hangars each with more than 5.000 m test area Climatic chambers for environmental simulation Latest measurement and
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction bending, ENGIE Fabricom
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-4 First edition 2011-04-01 Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
More informationCertification according DIN 6701
Certification according DIN 6701 April 2017 / New series of standard DIN 6701 (issued 2015) In case of further questions please contact: Frank Stein Head of Certification Body TBB Cert Wiener Str. 12 28359
More informationSeifert x cube series Versatile 2D and 3D X-ray system built for speed.
GE Inspection Technologies Seifert x cube series Versatile 2D and 3D X-ray system built for speed. gemeasurement.com/x-ray x plore production CT line Make important production decisions faster. GE is revolutionizing
More informationTrainee Process Technician
Trainee Process Technician The Trainee Process Technician is required to perform manufacturing and housekeeping tasks under close supervision. He/she is required to conform to all company procedures and
More informationHINDON FORGE PVT. LTD.
www.hindonforge.net Hammering Quality into Forgings An ISO 9001:2000 Certified Co. HINDON FORGE PVT. LTD. Manufacturers of Critical Steel Forgings and Flanges MANUFACTURERS & EXPORTERS OF ALL KINDS OF
More informationAutomated ultrasonic tube-to-tube sheet weld scanning
White Paper Automated ultrasonic tube-to-tube sheet weld scanning By: J. Peter Bertelsen & Zdravko Kishev, Advanced NDT Global Abstract This paper describes an advantageous ultrasonic technique for in-depth
More informationInnovative Technologien zur Erzeugung und Verwertung von Biogas
Großmann Ingenieur Consult GmbH Innovative Technologien zur Erzeugung und Verwertung von Biogas Offshore Technologies and Steelworks Stainless Steel and Aluminium Surface Finishing Design and Engineering
More informationPLANT SERVICE FROM INFRASERV KNAPSACK. ENGINEERING AND CONSTRUCTION PLANT SERVICES SITE OPERATION.
Is it possible for a plant to feel good all round? PLANT SERVICE FROM INFRASERV KNAPSACK. ENGINEERING AND CONSTRUCTION PLANT SERVICES SITE OPERATION www.infraserv-knapsack.de Plant services The feelgood
More informationalimex Product Information
Quality, Flexibility, Knowledge, Experience, Excellence: Solutions in Aluminium Cast Plates. alimex Product Information PROVIDING LEADING-EDGE ALUMINIUM CAST PLATE SOLUTIONS Contents ACP 5080 4-5 ACP 5080R
More informationIBTTA Facilities Management and Maintenance Workshop Nashville, Tennessee
IBTTA Facilities Management and Maintenance Workshop Nashville, Tennessee High-Speed Nondestructive Testing Methods for Mapping Voids, Debonding, Delaminations, Moisture, and Other Defects Behind or Within
More informationMissile Inspection Using High-Energy X-ray Non- Destructive Testing Systems
LINAC ORIATRON Missile Inspection Using High-Energy X-ray Non- Destructive Testing Systems Real-time non-destructive testing and analysis of industrial missiles to detect defects (cracks, porosities, inhomogeneities)
More informationEXPRESSION OF INTEREST (EOI) FOR. Mechanical Works
EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-12 First edition 2011-04-01 Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged
More informationQuality Management (QM)
www.kem-kueppers.com Quality Management (QM) QM Manual Certified according to DIN EN ISO 9001 2 Quality Management System Quality Management System 3 KEM Quality Policy The best possible quality is our
More informationFRAZIER RELIABILITY SOLUTIONS
(817) 416-4306 500 North Kimball Ave. Suite 103C Southlake, TX 76092 Frazier Reliability Solutions is a subsidiary of Frazier & Associates, Inc. Since 1996, Frazier Reliability Solutions has been providing
More informationESIDEL (European Steel Industry Data Exchange Language) Certificate/Quality report Version 1.1. EDIFER «XML Business Group»
ESIDEL (European Steel Industry Data Exchange Language) Certificate/Quality report Version. EDIFER «XML Business Group» March 2006 Certificate / Quality report By EUROFER - EDIFER committee - Business
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du
More informationGridin's Group certificates NON-DESTRUCTIVE TESTING
Gridin's Group certificates ABOUT US Gridin s Group, has been successfully providing non-destructive testing services in various industrial sectors since 2004. The main activity of the company is non-destructive
More informationSupplier self-information
Page 1 of 5 GENERAL INFORMATION General corporate data Address: Legal form: Homepage: V.A.T. Registration No.: Group membership: Subsidiary companies: Ownership: Line of business: Contact person Name Phone
More informationQUALIFICATION AND APPLICATION OF IN-SERVICE INSPECTION OF VVER-440 CONTROL ROD DRIVE PROTECTION PIPES
QUALIFICATION AND APPLICATION OF IN-SERVICE INSPECTION OF VVER-440 CONTROL ROD DRIVE PROTECTION PIPES Krunoslav Markulin, Matija Vavrous INETEC-Institute for Nuclear technology, Croatia Jani Pirinen, Petri
More informationINTRODUCTION TO ULTRASONIC IN-LINE INSPECTION OF CRA PIPELINES. Herbert Willems, Gerhard Kopp NDT Global, Germany
INTRODUCTION TO ULTRASONIC IN-LINE INSPECTION OF CRA PIPELINES Herbert Willems, Gerhard Kopp NDT Global, Germany ABSTRACT Pipelines manufactured from corrosion-resistant alloys (CRA) are becoming more
More informationZamperla, Inc. Release Date: December 1, Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005
Ride distributed by: Bulletin No: SB-01-2018 Zamperla, Inc. Release Date: December 1, 2018 49 Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005 Supersedes: USA Completion Date: Before
More informationZamperla, Inc. Release Date: December 1, Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005
Ride distributed by: Bulletin No: SB-01-2018 Zamperla, Inc. Release Date: December 1, 2018 49 Fanny Road Effective Date: January 1, 2019 Boonton, New Jersey 07005 Supersedes: USA Completion Date: Before
More informationWelcome to. FORCE Technology
Welcome to FORCE Technology Eddy Current Inspection Tube inspection and analyses Fast automated inspection Optimized inspection Steel, stainless steel, etc. Eddy Current Inspection Tube inspection and
More informationQuality Management (QM)
www.kem-kueppers.com info@kem-kueppers.com Quality Management (QM) QM Manual Certified according to DIN EN ISO 9001 2 Quality Management System KEM Quality Policy The best possible quality is our top business
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More information