FERROXCUBE DATA SHEET. EP10 EP cores and accessories. Supersedes data of September Sep 01
|
|
- Ada Barton
- 5 years ago
- Views:
Transcription
1 FERROXCUBE DATA SHEET Supersedes data of September Sep 01
2 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.70 mm 1 V e effective volume 215 mm 3 I e effective length 19.3 mm A e effective area 11.3 mm 2 A min minimum area 8.55 mm 2 m mass of core set 2.8 g handbook, halfpage 7.6 ± ± ± ± ± 0.15 ;;; ;;; 7.4 ± 0.2 MBG ± 0.3 Fig.1 core set. Core sets for filter applications Clamping force for A L measurements, 30 ±10 N. A L (nh) Core sets for general purpose transformers and power applications Clamping force for A L measurements, 30 ±10 N Sep µ e AIR GAP (µm) 3B ±25% B46 A L (nh) µ e TOTAL AIR GAP (µm) 3C81 25 ±3% C81-E25 40 ±3% C81-A40 63 ±3% C81-A ±3% C81-A ±5% C81-A ±25% C81 3C ±25% C91 3C94 25 ±3% C94-E25 40 ±3% C94-A40 63 ±3% C94-A ±3% C94-A ±5% C94-A ±25% C94
3 3C ±25% C96 3F3 25 ±3% F3-E25 40 ±3% F3-A40 63 ±3% F3-A ±3% F3-A ±5% F3-A ±25% F3 3F ±25% F35 Core sets of high permeability grades Clamping force for A L measurements, 30 ±10 N. A L (nh) Properties of core sets under power conditions Properties of core sets under power conditions (continued) µ e AIR GAP (µm) 3E ± 25% E27 3E / 30% E5 3E / 30% E55 3E / 30% E6 B (mt) at CORE LOSS (W) at H = 250 A/m; f = 25 khz; f=100khz; f=100khz; f=400khz; f=25khz; Bˆ = 200 mt; Bˆ = 100 mt; Bˆ = 200 mt; Bˆ =50mT; T=100 C T=100 C 3C C (1) 0.08 (1) 3C C F F B (mt) at A L (nh) µ e TOTAL AIR GAP (µm) CORE LOSS (W) at H = 250 A/m; f = 500 khz; f=500khz; f=1mhz; f=3mhz; f=25khz; Bˆ =50mT; Bˆ = 100 mt; Bˆ =30mT; Bˆ =10mT; T=100 C 3C C C Sep
4 B (mt) at H = 250 A/m; f=25khz; 3C F F3 315 Note 1. Measured at 60 C. f = 500 khz; Bˆ =50mT; CORE LOSS (W) at f=500khz; Bˆ = 100 mt; f=1mhz; Bˆ =30mT; f=3mhz; Bˆ =10mT; T=100 C 2008 Sep
5 COIL FORMER General data CSH--1S-8P PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V-0 ; UL file number E41429(M) copper clad steel, tin (Sn) plated 180 C, IEC 60085, class H IEC , Part 2, Test Tb, method 1B, 350 C, 3.5 s IEC , Part 2, Test Ta, method 1, 235 C, 2 s handbook, full pagewidth 12.4 max min CBW max. Fig.2 coil former: 8-pins. Winding data and area product for 8-pins coil former NUMBER OF SECTIONS (mm 2 ) MINIMUM WIDTH AVERAGE LENGTH OF TURN PRODUCT Ae x Aw (mm 4 ) CSH--1S-8P 2008 Sep
6 General data CSH--2S-8P PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V-0 ; UL file number E41429 (M) copper-clad steel, tin (Sn) plated 155 C, IEC 60085, class F IEC , Part 2, Test Tb, method 1B, 350 C, 3.5 s IEC , Part 2, Test Ta, method 1, 235 C, 2 s 11.1 max. 8.9 ± ±0.1 (5.4 min.) ±0.15 handbook, full pagewidth 9.9 max CBW max. 2.5 Fig.3 coil former. Winding data and area product for coil former NUMBER OF SECTIONS MINIMUM (mm 2 ) NOMINAL WIDTH AVERAGE LENGTH OF TURN PRODUCT Ae x Aw (mm 4 ) x 54.2 CSH--2S-8P 2008 Sep
7 General data CSHS--1S-8P-T PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V-0 ; UL file number E41429 (M) copper-clad steel, tin (Sn) plated 155 C, IEC 60085, class F IEC , Part 2, Test Tb, method 1B, 350 C, 3.5 s IEC , Part 2, Test Ta, method 1, 235 C, 2 s handbook, full pagewidth min max max CBW max. Fig.4 coil former. Winding data and area product for coil former NUMBER OF SECTIONS MINIMUM (mm 2 ) NOMINAL WIDTH AVERAGE LENGTH OF TURN PRODUCT Ae x Aw (mm 4 ) CSHS--1S-8P-T 2008 Sep
8 MOUNTING PARTS General data ITEM REMARKS FIGURE Clasp copper-nickel-zinc alloy (nickel silver) 5 CLA- Spring copper-nickel-zinc alloy (nickel silver) 6 SPR- Clip stainless steel (CrNi); clamping force 27 N 7 CLI- handbook, halfpage TYP CBW419 1 handbook, halfpage TYP. CBW420 Fig.5 Mounting clasp CLA-. Fig.6 Mounting spring SPR-. handbook, halfpage CBW Fig.7 Mounting clip CLI Sep
9 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification PRODUCT STATUS Development DEFINITIONS This data sheet contains preliminary data. reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype Design-in Preferred Support These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability Sep
FERROXCUBE DATA SHEET. EP17 EP cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.870 mm 1 V e effective volume 999 mm 3 I e
More informationFERROXCUBE DATA SHEET. RM8/ILP RM, RM/I, RM/ILP cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET RM, RM/I, RM/ILP cores and accessories Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).44 mm 1 V e
More informationFERROXCUBE DATA SHEET. ER9.5/2.5/5 Planar ER cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.67 mm 1 V e effective volume 120 mm 3 I e effective
More informationFERROXCUBE DATA SHEET. EQ30 EQ cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 CORES Effective core parameters of a set of EQ cores SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.426 mm 1 V e effective volume
More informationFERROXCUBE DATA SHEET. P30/19 P cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET P3/19 P cores and accessories Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).33 mm 1 V e effective
More informationFERROXCUBE DATA SHEET. P14/8 P cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET P14/8 P cores and accessories Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT handbook, halfpage 9.5.3 Σ(I/A) core factor
More informationFERROXCUBE DATA SHEET. PQ20/16 PQ cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 2004 2008 Sep 01 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 0.607 mm 1 V e effective volume 2330 mm 3 I e
More informationFERROXCUBE. P18/11 P cores and accessories. Supersedes data of February Sep 01
FERROXCUBE DATA SHEET P18/11 P cores and accessories Supersedes data of February 22 24 Sep 1 CORE SETS Effective core parameters 13.4.3 SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).597 mm 1 V e
More informationFerrites and accessories
Ferrites and accessories RM 14, RM 14 LP Cores and accessories Series/Type: B65887, B65888 Date: September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet
More informationFerrites and accessories
Ferrites and accessories E 16/8/5 (EF 16) Core and accessories Series/Type: B66307, B66308 Date: September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet
More informationFerrites and accessories
Ferrites and accessories Core and accessories Series/Type: B66319, B66232 Date: September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information
More informationFerrites and accessories
Ferrites and accessories EP 7 Core and accessories Series/Type: B65839, B65840 Date: September 2006 Data Sheet EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information
More informationFerrites and accessories
Ferrites and accessories P 18 11 Core and accessories Series/Type: Date: September 2006 Data Sheet B65651, B65652, B65655, B65659 EPCOS AG 2006. Reproduction, publication and dissemination of this data
More informationFerrites and accessories
Ferrites and accessories ETD 39/20/13 Core and accessories Series/Type: B66363, B66364 Date: September 2006, December 2008 %BUB4IFFU EPCOS AG 2006. Reproduction, publication and dissemination of this data
More informationFerrites and accessories
Ferrites and accessories Cores and coil former Series/Type: Date: Version: B65877A, B65878E...April-2008,_September-2008 1,_2 Content of header bars 1 and 2 of data sheet will be automatically entered
More informationFerrites and accessories
Ferrites and accessories PQ 32/20 Cores and coil former Series/Type: Date: Version: B65879A, B65880E...April-2008,_September-2008 1,_2 Content of header bars 1 and 2 of data sheet will be automatically
More informationBeryllium-Copper Gaskets
STOCK SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE beryllium-copper gaskets combine high levels of EMI shielding effectiveness with springfinger wiping and low
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 oardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationB66308J1108T001 B66308W1108T B66308A1108T001 B66308B1108T
EF coil formers Series/Type: E 16/8/5 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66308J1108T001
More informationB66202J1106T001 B66202B1106T B66202A1108T001 B66202B1108T
EF coil formers Series/Type: E 13/7/4 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last Shipments B66202J1106T001
More informationEPCOS AG is a TDK Group Company.
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a
More informationPIN Sockets & PIN Connectors General Specifications Part Numbers And Product Identification
Sockets & Connectors General Specifications Part Numbers And Product Identification GENERAL SPECIFICATIONS The values listed below are general specs applying for LEYCONN socket and pin connectors. Please
More information3M Accessories EMI System 3705/3706 Series. Physical
M ccessories.100.100 EMI System 705/706 Series S Spring latch attachment allows quick, easy connect/ disconnect S Fits existing M connectors S Intra-cabinet grounding eliminates pigtails/drain wires and
More informationFerrites and Accessories
Series/Type: Ordering code: Date: August 2009 Version: 2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the
More informationUltra high-speed switching Voltage clamping Protection circuits Mobile communication, digital (still) cameras, PDAs and PCMCIA cards.
3 September 208 Product data sheet. General description 2. Features and benefits 3. Applications 4. Quick reference data Planar encapsulated in a SOD882 leadless ultra small plastic package. Low forward
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More informationFerrites and Accessories
Ferrites and Accessories Cores and coil former Series/Type: B65883A, B65884E Date: 2009-06-05 Version: 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers!
More informationFerrites and accessories
Ferrites and accessories RM 7, RM 7 LP Cores and accessories Series/Type: B65819, B65820, B65659 Date: September 2006/March 2011 Data Sheet EPCOS AG 2006, 2011. Reproduction, publication and dissemination
More informationRoHS Compliance Document
D2-Pak RoHS Compliance Document Contents: 1. 2. Solder Reflow 3. Tin Whisker Report D2-pak (3 or 5 Lead) BOM 1 90598-46-2 0.05808 11% 3.8% Lead Frame Copper 0.94840 Die Attach Soft Solder 0.01200 Cu 7440-50-8
More informationDISCONTINUED. 3M Accessories. Physical
3M ccessories.100.100 EMI System 3705/3706 Series Spring latch attachment allows quick, easy connect/ disconnect Fits existing 3M connectors Intra-cabinet grounding eliminates pigtails/ drain wires and
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator
More informationMATERIAL DECLARATION SHEET
MATERIAL DECLARATION SHEET Product Part Number Product Line 1530-1X-W PoE Ethernet Surge Protector MSL 1 RoHS Compliant No Compliance Date N/A No. 1 Construction Element (subpart) Acrylic Conformal Coating
More informationMATERIAL DECLARATION SHEET
Number 3500S-1-103L Product Line Precision Pot Compliance Date RoHS Compliant Yes MSL N/A No. Construction Element (subpart) 1 Mandrel Wire Homogeneous weight [g] 2 Resist Wire Metal 3.1520 3 Epoxy Epoxy
More informationRectangular Modulus Cores (RM Cores Soft Ferrite)
RM (Rectangular modular) cores arose due to the demand for coil formers with integrated pins that allow for efficient winding and high PCB packing densities. Clamps engaging in recesses in the core base
More informationLow/Medium Capacity Rockers Series SW
Low/Medium Capacity ockers Series SW GENEAL SPECIFICATIONS FO SW000s (esistive & Inductive Load) Other atings Power Level: Shown in the following tables Contact esistance: 0 milliohms maximum Insulation
More information3M Mini D Ribbon (MDR) Connectors.050 Surfacemount Vertical Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors Wiper-on-wiper contact for reliable repetitive plugging Interface latch design for connection stability I 1284C Interface as a 6 contact connector Contacts: 20, 26 and
More informationCover. Wiper. Base. Shaft
TURNS INTERNAL STRUCTURE!! FEATURES Lead-free soldering, Cadmium-free Fine adjustment is possible Automatic mounting is possible (Taping) Flow/reflow soldering is possible Sealed construction (Washable)
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationD-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature
DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design
More informationProduct Documentation MS1V-T1K
Product Documentation Quartz Crystal Unit 32.768 khz February 2017 1/12 Rev. 1.0 2. Product Description The is a low frequency surface mount technology Quartz Crystal Unit that incorporates a tuning fork
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationRITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
More information3M Pak 50 Stacking Compression Connector 130 Position 388 Series
Pak 50 Stacking Compression Connector No solder joints, compression stacking connector Standardized interface for Intel Modular Interface extension (MIX) Bus (module to module and module to baseboard connector)
More information3M CF Card Header CompactFlash Type I, Surface Mount
CF Card Header Meets CF standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right Angle Receptacle-Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right ngle Receptacle-Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction SMT
More informationProduct Documentation
Product Documentation Quartz Crystal Unit 32.768 khz March 2017 1/12 Rev. 1.0 2. Product Description The is a low frequency SMT Quartz Crystal Unit that incorporates a tuning fork Quartz Crystal Resonator.
More informationProduct Documentation
Product Documentation AT-Cut Quartz Crystal Unit 16 MHz 70 MHz April 2018 1/12 Rev. 1.0 2. Product Description The is a high frequency SMT Quartz Crystal Unit that incorporates an AT-Cut Quartz Crystal
More informationASPICS IPD Companion for ISM Transceiver IC: RF front end part
IPD Companion for ISM Transceiver IC: RF front end part Rev 1.2 TD Introduction The ASPICS320.606 is an integrated passives device specifically designed for use with the SEMTECH SX1211 868/915MHz ISM/UHF
More informationDISCONTINUED. Replaced by
M DIN R-Form Plug Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series Early mate late break (EMLB) grounding contacts for hot swapping Select load capability Expanded pin counts
More information30 V to 60 V PTC Thermistors For Overload Protection
30 V to 60 V PTC Thermistors 238 66. 5.../PTCCL..H...BE FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t
More informationPrevious Page Return to Index Next Page
Previous Page Return to Index Next Page http://www.switchcraft.com/products/jack-107.html (1 of 8) [2/13/2005 2:31:54 PM] 3.5 mm SINGLE MONO AND STEREO JACKS 1. 35RAPC4BV4 2. 35RAPC2AV 3. 35RAPC2BHN2 4.
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.m.com/ interconnects
More informationMAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationBRAZING & SOLDERING ALLOYS & FLUXES
YOUR COMPLETE SOURCE FOR BRAZING & SOLDERING ALLOYS & FLUXES Name Description AWS Spec Composition % Temperature F Ag Cu Zn Sn Other Melt Flow Braze 560 Lowest temperature, Cadmium-free filler metal, very
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More informationPUSH BUTTONS A 1 E C 1 SERIES 5A AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Snap acting pushbutton C File N E195524 File N E195524 Contact Rating: S (silver) - 1A @ 120 VAC or 28 VDC - A (gold) - 0.4 VA max @ 20 VAC or DC max - G (gold on silver)
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Plug - Shielded 101 Series
Boardmount Through-Hole Right ngle Plug - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction Screw or ground lock PCB retention Normal and
More information3M CF Card Header CompactFlash Type I, Surface Mount
Meets CFA standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability for mobile
More information3M CF Card Header CompactFlash Type I, Surface Mount
Meets CFA standards Single row solder tails with 0.65 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability for mobile
More informationProduct Documentation
Product Documentation AT-Cut Quartz Crystal Unit 24 MHz 50 MHz April 2018 1/12 Rev. 1.0 2. Product Description The is a high frequency SMT Quartz Crystal Unit that incorporates an AT-Cut Quartz Crystal
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.mconnectors.com
More informationPhone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.
hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges
More information660 Volts 630 & 800AMP
Ergon Energy Corporation Limited Technical Specification for Switch- Disconnectors and Fuse-Switch- Disconnectors 660 Volts 630 & 800AMP ETS-06-02-01 Check this is the latest Process Zone version before
More informationSEP181404TA. LED Data Sheet - SEP181404TA
SEP181404TA External Shape Type : 3.5 2.8 Flat View LED Color : Amber Application : Automotive, Consumer Electronics, Office Automation, Indicator Feature : MSL-3, RoHS compliant, Compatible with heat-resistance
More information3M Serial Advanced Technology Attachment (SATA) Connector
M Serial Advanced Technology Attachment (SATA) Connector 22-position signal and power combination Input/ouput connector for backplane applications EMLB contacts for "hot swap" Blind mate polarization for
More informationProduct Documentation CM7V-T1A
Product Documentation Quartz Crystal Unit 32.768 khz February 2017 1/12 Rev. 1.1 2. Product Description The is a low frequency SMT Quartz Crystal Unit that incorporates a tuning fork Quartz Crystal Resonator.
More informationFINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 1,7 Inductance 100 khz/ 250 mv L 47 µh ±20% Rated Current ΔT = 40 K I R 1.1 A max. 4,0
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of PC board space Mates with boardmount and
More informationStandard Bourdon tube pressure gauges EN 837-1
Standard Bourdon tube pressure gauges EN 837-1 Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys.! When measuring gas or vapour,
More informationCoining Inc. Micro-Stampings Overview
Coining Inc. Micro-Stampings Overview Micro-Stampings and Solder Preforms More Than 100 Presses 3 ton to 85 ton High speed (>2000 strokes/min) High precision, 4 post presses Hot presses for stamping Mo,
More informationTip Jacks. Johnson Components P.O. Box 1732 Waseca, MN Fax:
.060" (1.5 mm) Shrouded Tip Jack (Solder or Crimp) 5.060" (1.5 mm) Uninsulated Tip Jack (Solder or Crimp) 5.060 (1.50) Shrouded Tip Jack (Solder or Crimp) 5.060 (1.50) Uninsulated Tip Jack (Solder or Crimp)
More informationGeneral Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, VDC (Automotive Grade) Applications
General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, 50 400 VDC (Automotive Grade) Overview The R82 Series is constructed of metallized polyester film (wound or stacked
More informationHigh Temperature (245 C) Thick Film Chip Resistor
High Temperature (245 C) Thick Film Chip Resistor DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES High temperature (245 C) Large ohmic value range 0.1 to 100 M Available Operating
More information3M Pak 50 Stacking Compression Connector 130 Position 388 Series
Pak 50 Stacking Compression Connector No solder joints, compression stacking connector Standardized interface for Intel Modular Interface extension (MIX) Bus (module to module and module to baseboard connector)
More information0.56 INCH FOUR DIGITS DISPLAY A-564SR G/W REV:A / 0
PACKAGE DIMENSIONS NOTES : 1. All dimensions are in millimeters. (inches) 2. Tolerance is ± 0.25(0.010") unless otherwise specified. DRAWING NO. : DS-14-06-0084 DATE : 2006-09-18 Page : 2 HD-R/RD013 FEATURES
More information3M PCB Connector.100 Four Row 3400 Series
PCB Connector.00 Four Row 300 Series Low profile Standard staggered grid Variety of pin lengths and plating options available See Regulatory Information Appendix (RIA) for chemical compliance information
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of P board space Mates with boardmount and wiremount products
More informationProduct Documentation
Product Documentation Quartz Crystal Unit 32.768 khz September 2018 1/12 Rev. 1.2 2. Product Description The is a low frequency SMT Quartz Crystal Unit that incorporates a tuning fork Quartz Crystal Resonator.
More information3M Pin Strip Header, 1512 Series 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight
2 2 Solder Tail Straight & Right Angle, Surface Mount Straight Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes
More informationDATA SHEET PART NO. : C-551SRD-NW B/W REV : A / 1
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More information520MY8C-f mm DIA LED LAMP REV:A / 1 PACKAGE DIMENSIONS. DRAWING NO. : DS DATE : Page : 1
PACKAGE DIMENSIONS ITEM RESIN LEAD FRAME MATERIALS Epoxy Resin Sn Plating iron Alloy Note: 1.All Dimensions are in millimeters. 2.Tolerance is ±0.25mm(0.010 ") Unless otherwise specified. 3.Protruded resin
More informationPolypropylene Pulse/High Frequency Capacitors A70 Series Single Metallized Polypropylene Film, Axial. Applications. Capacitance Code (pf)
Polypropylene Pulse/High Frequency Capacitors Overview Applications The A70 Series is constructed of metallized polypropylene film with axial leads of tinned wire. The axial leads are electrically welded
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More informationMATERIAL DECLARATION. Material Number 95A1D-Z28-EA0/300L Thru 330L Product Line Panel Controls Compliance Date March 25, 2014
Number 95A1D-Z28-EA0/300L Thru 330L Product Line Panel Controls Compliance Date March 25, 2014 RoHS2 Compliant Yes MSL N/A No. Construction Element (subpart) Homogeneous weight [g] 1 Substrate Ceramic
More informationsuitable with Standard SSPF Panel Sockets (not included):
ENGLISH Datasheet Connector Panel Face-plates Type SSPF - Face Plate panels to suit miniature and standard SSPF panel mount sockets with stainless steel mounting bracket Miniature SSPF Panel (12 way shown):
More informationCopper Clad Steel (40%) Conductor Wire
Introduction Copper Clad Steel (CCS) is a composite conductor material containing a low carbon steel core surrounded by copper. The copper provides the electrical conductivity, and the steel contributes
More informationSpecifications. When specifying metal panel roof systems, roof. system designers and specifiers need to be aware
32 www.professionalroofing.net OCTOBER 2012 When specifying metal panel roof systems, roof system designers and specifiers need to be aware of specific standards. Sometimes, the standards applicable to
More informationRecycling Passport. Device: Pump X-am 125 Mark II Issued: Producer information. 2. Product identification.
Recycling Passport Device: Pump X-am 125 Mark II Issued: 2018-10-24 1. Producer information Name: Address: Web page: Dräger Safety AG & Co. KGaA Revalstr. 1 D-23560 Lübeck Germany www.draeger.com 2. Product
More informationSection Pot Cores Low Level Applications
The information contained in this section is primarily concerned with the design of linear inductors for high frequency LC tuned circuits using ferrite pot cores. Magnetics has arranged the data in this
More informationWE-LLCR Resonant Converter
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv L 400 µh ±10% Turns ratio n 27 : 6 : 6 : 2 ±3% Saturation
More informationTS7800 Series 3-Terminal Fixed Positive Voltage Regulator
TO-220 ITO-220 TO-263 (D 2 PAK) Pin Definition: 1. Input 2. Ground (tab) 3. Output General Description The TS7800 series voltage regulators are monolithic integrated circuits designed as fixed-voltage
More informationTECHNICAL DATA SHEET GRILON TSG-30/4 V0
TECHNICAL DATA SHEET GRILON TSG-30/4 V0 Product Description Grilon TSG-30/4 V0 is a heat stabilised, flameretardant, self-extinguishing engineering thermoplastic, reinforced with glass-fibre 30% (by weight)
More informationSMD RFI CLIP Data Sheet
1/14 Attn : Data Sheet - CONDITION : 1. 2. 3. 4. We approved the product as above. WRITE REVIEW APPROVAL ICT NAME S.P. HONG J.E. KIM S.K,JUNG SIGNATURE Supplier : Innochips Technology CO., LTD By President
More informationDISCONTINUED. 3M PC Card Header Single Slot, No Ejector. Physical. Electrical. Environmental. UL File No.: E68080
M PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Solder retention clips option for secure hold-down Stand-off height options ESD
More informationApplications R41 3 I M1 M
R41, Class Y2, 300 VAC, 110 C (Automotive Grade) Overview The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements
More informationTerminals: Terminals BTI-15. Specifications. Elcom International Pvt. Ltd. C-DOT, LCSO Approved. Panel Mounting
Terminals BTI-15 C-DOT, LCSO Approved Panel Mounting Screw-type Mounting: Front Panel Thickness: 3.0 max. Test Specification: JSS 52710(1994) TYPE TSC - 10 - N. Product App. Weight(Max): 12.0 gms Polyamide
More information