MATERIAL DECLARATION. Material Number 95A1D-Z28-EA0/300L Thru 330L Product Line Panel Controls Compliance Date March 25, 2014
|
|
|
- Blaise Hicks
- 6 years ago
- Views:
Transcription
1 Number 95A1D-Z28-EA0/300L Thru 330L Product Line Panel Controls Compliance Date March 25, 2014 RoHS2 Compliant Yes MSL N/A No. Construction Element (subpart) Homogeneous weight [g] 1 Substrate Ceramic Silver conductor Ink Resistive Ink 1 Ink Homogeneous / Substances CASRN if applicable s Mass % Mass % of total unit wt. Aluminum Oxide Silicon Oxide Magnesium Oxide Calcium Oxide Silver Palladium Disbismuth-trioxide Ruthenium(IV)oxide Silicon dioxide Nickel-monoxide Lead-monoxide* Ruthenium dioxide Silver Palladium Boron oxide* Aluminum oxide Lead monoxide* Silicon dioxide Calcium oxide Dibismuth trioxide Subpart mass of total wt. (%) Headquarters Riverside CA page 1 of 5
2 Digadolinium trioxide Proprietary ingredients Trade secret Ruthenium dioxide Silver Palladium Boron oxide* Resistive Ink 2 Ink Aluminum oxide Lead monoxide* Silicon dioxide Dibismuth trioxide Digadolinium trioxide Proprietary ingredients Trade secret Terminal Wire Copper 0.03 Copper Plating Tin Solder Lug Terminal 7 Contact Copper Brass Zinc Plating Nickel Plating Tin Copper Strip Laminated 0.05 Zinc Spacer Strip 0.04 Solder Inlay Wire Brass Shaft Brass Nickel Copper Zinc Tin Silver Bismuth Impurities Copper Zinc Lead Copper Zinc Headquarters Riverside CA page 2 of
3 9 Rotor PBT Body PBT Bushing Brass Rear Cover PBT Drive Pin (4) Carbon Steel 0.05 Lead Glass Trade secret Antimony Oxide Glass Trade secret Antimony Oxide Copper Zinc Lead Glass Trade secret Antimony Oxide Carbon Manganese Phosphorus Sulfur Silicon Aluminum Iron Headquarters Riverside CA page 3 of 5
4 14 Washer Teflon Washer Teflon Spring Washer Plating Zinc Beryllium Copper Washer Stainless Steel Retaining Ring Stainless Steel Lube Grease 0.1 Polytetrafluoroethylene Dichloro-1-fluoroethane Polytetrafluoroethylene Dichloro-1-fluoroethane Copper Silicon Beryllium Aluminum Carbon Manganese Phosphorus Sulfur Silicon Chromium Nickel Iron Carbon Manganese Phosphorus Sulfur Silicon Chromium Nickel Molybdenum Aluminum Iron Decene, tetramer, mixed with 1-decene trimer, hydrogenated 1-Propene, polymer with ethane Silica, amorphous fumed Headquarters Riverside CA page 4 of 5
5 20 Lube Grease 0.05 Total weight Ethene, tetrafluoro-, homopolymer Decanoic acid, mixed esters with heptanoic acid, octanoic acid, trimethylolpropane Lithium 12- hydroxystearate Isohexadecylisooctadecanoate Polyisobutylene This Document created: March 25, 2014 Important remarks: 1. It is the responsibility of the user to verify they are accessing the latest version. 2. RoHS2 exemptions used: 6c- lead in copper alloy; 7c-I electronic components containing lead in a glass * Lead monoxide and boron oxide are part of a glass formulation. Once glass is formed, these materials are no longer present in the lead monoxide or boron oxide form they are part of a glass matrix (glass exemption REACH). Headquarters Riverside CA page 5 of 5
MATERIAL DECLARATION SHEET
Number Product Line 3590S-6-L Precision Potentiometer Compliance Date May 31, 2006 RoHS Compliant Yes MSL N/A No. Construction Element (Subpart) Homogeneous Weight (g) 1 Hex Nut Brass 0.0082 2 Lock Washer
Certificate of Compliance
Certificate of Compliance DUNS Document Date URL for Additional Information 00-489-5751 Apr 26, 2017 Fairchildsemi.com Contact Title Phone Email Jolene Small Product Ecology Manager 207-761-6214 jolene.small@fairchildsemi.com
Materials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
Freescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MPC8270CZUUPEA FTBGA 480 37*37*1.7P1.27 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response
SILLIKER, Inc. Southern California Laboratory 6360 Gateway Drive, Cypress, CA Tel. 209/ Fax. 714/
6360 Gateway Drive, 90630 95073 Page 1 of 8 CI-516 Cistanche 361439388 ICP MS Full Mineral Screen EPA 3050/6020 USP730 BRN Aluminum 2.2 ppm (w/w) Antimony Arsenic 0.06 ppm (w/w) Barium 0.09 ppm (w/w) Beryllium
Freescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number Mfg Item Name MPXV7002DPT1 SNSR 8PIN DUALPORT SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
ICP/ICP-MS Standards. High Purity Standards for ICP/ICP-MS
ICP/ICP-MS Fisher Brand AA/ICP MS Fisherbrand ICP/ICP-MS Catalog No. Catalog No. Concentrationion Size ml Concentration Size ml 36 102 7820 Aluminum 36 102 7821 Antimony 36 102 7823 Arsenic 36 102 7824
AP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2009-2010 Other 1. Pure solid phosphorus (white form) is burned in air. (2002) 2. Sulfur dioxide gas is bubbled into distilled water. (2001) 3. A drop of potassium
Flexibility and drive have been the key factors in the rapid growth of Cometox. Our range of products is widely adopted in the following sectors:
BROCHURE2012 The setting up of Cometox Srl in 1983 was the result of decades of experience gained in previous individual involvement in the chemical products and non ferrous metals sectors. At the outset
Freescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number MC34704BEP Mfg Item Name QFN-EP 56 7*7*0.9 P0.4 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
Introduction and Methodology RoHS Recast or RoHS2: Ozone Depleting Materials Brominated Flame Retardant Polymers do not
Introduction and Methodology Microchip Technology Incorporated s (Microchip) semiconductor devices are assembled at our assembly facility outside Bangkok, Thailand, and by subcontracted assembly sites
calcium oxide removes acidic oxides basic oxides acidic oxides basic oxides Iron obtained from the blast furnace is contaminated with
1 Iron from a blast furnace is treated with and with calcium oxide to make steel. Which substances in the are removed? removes calcium oxide removes acidic oxides basic oxides acidic oxides basic oxides
Freescale Semiconductor Inc
Freescale Semiconductor Inc PART INFORMATION Mfg Item Number M86295G12 Mfg Item Name FCPBGA 625 21*21*2.4 P.8 SUPPLIER Company Name Freescale Semiconductor Inc Company Unique ID 14-141-7928 Response Date
Appendix C1: Batch Kinetics Tests
Appendix C1: Batch Kinetics Tests This appendix contains the entire data set for the batch kinetics tests for the potential biofilter components. These tests were performed to provide estimates of optimal
One of the main ores of zinc is zinc blende, ZnS. There are two stages in the extraction of zinc from this ore.
1 Two of the main uses of zinc are for galvanising and for making alloys. One of the main ores of zinc is zinc blende, ZnS. There are two stages in the extraction of zinc from this ore. (a) Stage 1 Zinc
AP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2008-2009 Other 1. Sulfur trioxide gas is bubbled into a solution of sodium hydroxide. (2005) 2. Hydrogen iodide gas is bubbled into a solution of lithium carbonate.
Science Class 8 Topic: Elements And Compounds Reinforcement Worksheet
Science Class 8 Topic: Elements And Compounds Reinforcement Worksheet Name: Sec: Date: Q1.Choose the best answer. 1. Which of the following is an element? a) steam b) sugar c)dry ice d) sulphur 2. Which
Metal and Non Metals
Metal and Non Metals Malleable Ductile Sonorous Conductor Insulator KEYWORDS Rusting Brass Calcium Chloride Galvanising Reactivity Metals on the Periodic table Metals Non Metals Metals and their properties
GCSE 4462/01 CHEMISTRY 1 FOUNDATION TIER SCIENCE A/CHEMISTRY. P.M. FRIDAY, 12 June hour JUN S
Surname Centre Number Candidate Number Other Names 0 GCSE 4462/01 S15-4462-01 SCIENCE A/CHEMISTRY CHEMISTRY 1 FOUNDATION TIER P.M. FRIDAY, 12 June 2015 1 hour For s use Question Maximum Mark Mark Awarded
A.M. MONDAY, 18 January minutes
Candidate Name Centre Number Candidate Number 0 GCSE 240/02 ADDITIONAL SCIENCE IGER TIER CEMISTRY 2 A.M. MONDAY, 18 January 2010 45 minutes ADDITIONAL MATERIALS In addition to this paper you may require
CERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
Compounds & Reactions Week 1. Writing Formulas & Balancing Equations. Write the chemical formula for each molecular (covalent) compound.
Compounds & Reactions Week 1 Name Writing Formulas & Balancing Equations Write the chemical formula for each ionic compound. 1. Lithium fluoride 2. Copper (II) chloride 3. Manganese (II) oxide 4. Potassium
Material Evaporation Application Comment MP P / Optical films, Oxide films, Electrical contacts. Doping, Electrical contacts.
for vapour Aluminum (Al) -, Optical, Oxide, Electrical BN liners with lid are recommended due to the reactivity and the fact that Al creeps out. Cooling down of the cell with 1K per minute. 660 972 Antimony
This method is applicable to the following parameters: Nitric Hydrochloric acid digestion, Instrumental analysis.
Metals Revision Date: Nov 6, 2015 1.2.1 Strong Acid Leachable Metals () in Soil - Prescriptive s List & EMS Codes Analytical Method Introduction Method Summary Metals in Soil and Sediment. This method
A.M. MONDAY, 18 January minutes
Candidate Name Centre Number Candidate Number 0 GCSE 240/01 ADDITIONAL SCIENCE FOUNDATION TIER CHEMISTRY 2 A.M. MONDAY, 18 January 2010 45 minutes ADDITIONAL MATERIALS In addition to this paper you may
New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1
Surname Other Names Centre Number 0 Candidate Number New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1 ADDITIONAL MATERIALS A.M. WEDNESDAY, 18 January 2012 1 hour In addition to this paper you may require
PhysicsAndMathsTutor.com. Pearson Edexcel GCSE Chemistry/Science Unit C1: Chemistry in Our World
Write your name here Surname Other names Pearson Edexcel GCSE Centre Number Chemistry/Science Unit C1: Chemistry in Our World Candidate Number Thursday 19 May 2016 Morning Time: 1 hour You must have: Calculator,
Douglas G. Brookins. Eh-pH Diagrams. for. Geochemistry. With 98 Figures and 61 Tables. Springer -Verlag Berlin Heidelberg New York London Paris Tokyo
Douglas G. Brookins Eh-pH Diagrams for Geochemistry With 98 Figures and 61 Tables Springer -Verlag Berlin Heidelberg New York London Paris Tokyo Dr. Douglas G. Brookins Department of Geology University
Certificate of non-use of The Controlled Substances
Certificate of non-use of The Controlled Substances Company name Product Covered Thyristor SOT-89 Package Issue Date It is hereby certified by, that there is neither RoHS (EU Directive 2011/65/EU)-restricted
Material Composition Information:
Product Information Date/Time Revision Manufacturing site Product Number: Product Name: 20050628T1700 Malaysia HFBR-59xxxxx; QFBR-59xxL Multi-Mode LC SFF Product Mass 11.4000 to 12.6000 gram (min, max)
Abu Dhabi Trade Effluent Standards & Regulations Summary
Abu Dhabi Trade Effluent Standards & Regulations Summary August 2010 Disclaimer: The standards & regulations provided here are attributable to the named source and are assumed to be accurate at the time
Corrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Vapor Space Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
Corrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Partial Immersion Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
Jade Precision Engineering. Material Safety Data Sheet. Section I Product Identification. Section II: Composition / Information on Ingredient
Jade Precision Engineering Material Safety Data Sheet This MSDS covers the Copper Based and Ferrous Based Leadframes supplied by Jade Precision Engineering. Jade Precision Engineering s Leadframes are
Recycling Passport. Device: PAC 6000,6500,8000, 8500 Issued: Producer information. 2. Product identification.
Recycling Passport Device: PAC 6000,6500,8000, 8500 Issued: 2018-02-15 1. Producer information Name: Address: Web page: Dräger Safety AG & Co. KGaA Revalstr. 1 D-23560 Lübeck Germany www.draeger.com 2.
Chemistry/Science Unit C1: Chemistry in Our World
Write your name here Surname Other names Edexcel GCSE Centre Number Chemistry/Science Unit C1: Chemistry in Our World Candidate Number Tuesday 5 March 2013 Morning Time: 1 hour You must have: Calculator,
ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
QUANTITIES available range from small R&D requirements to full production truckloads.
READE began revolutionizing the chemicals industry OVER 200 YEARS AGO, and today it has secured a position as one of the premier specialty chemical solids distributors in the world. READE is a worldwide,
7.3 Bonding in Metals > Chapter 7 Ionic and Metallic Bonding. 7.3 Bonding in Metals. 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds
Chapter 7 Ionic and Metallic Bonding 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds 7.3 Bonding in Metals 1 Copyright Pearson Education, Inc., or its affiliates. All Rights Reserved. CHEMISTRY & YOU What
3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS SUB-TOPIC 9.3 TO 5 EXTRACTION OF METALS; RECYLING OF METALS; IRON LEARNING OUTCOMES
DEPARTMENT OF DEFENSE STANDARD PRACTICE
METRIC MIL-STD-871C (USAF) 30 June 2015 SUPERSEDING MIL-STD-871B 01 March 2007 DEPARTMENT OF DEFENSE STANDARD PRACTICE ELECTRO-CHEMICAL STRIPPING OF INORGANIC FINISHES Reactivated 30 June 2015 and may
SAFETY DATA SHEET. Section 2. HAZARD(S) IDENTIFICATION COLD ROLLED, LOW CARBON STEEL STRIP THOMAS STEEL STRIP DELAWARE AVENUE, N.W. WARREN, OHIO 44485
SAFETY DATA SHEET Section 1. IDENTIFICATION PRODUCT NAME : COMPANY IDENTIFCATION : COLD ROLLED, LOW CARBON STEEL STRIP THOMAS STEEL STRIP DELAWARE AVENUE, N.W. WARREN, OHIO 44485 EMERGENCY TELEPHONE NUMBER
LABORATORY TURNAROUND TIMES AND CHARGES
LABORATORY TURNAROUND TIMES AND CHARGES The enclosed prices reflect a 5 business day turnaround time. There will be a $25.00 minimum charge per report. Same Day Rush 24 Hour Rush 48 Hour Rush 72 Hour Rush
Corrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Total Immersion Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
Strong Acid Leachable Metals (SALM) in Soil - Prescriptive
Strong Acid Leachable Metals () in Soil - Prescriptive Metals Revision Date: Sept 15, 2017 Parameter Analytical Method Introduction Method Summary MDL(s) and EMS Analyte Code(s)* Metals in Soil and Sediment.
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
Services SAMPLE SUMMARY REPORT DR. PUMP, LLC Isuzu Rodeo. Atlanta, GA 05/24/2007
SAMPLE SUMMARY REPORT 7 Portage Trail 8.48.R 7 E A L 5.6.7 Fax:.6.7 44. 57 Report Date: 5/4/7 Primay Contact: Dr. Lev Nelik, PhD 977 Four Oaks Drive 6-75 Secondary Contact: None Provided Voice: None Provided
End of Life Plan. Kodak Scan Station 700 Series. Network Scanners
End of Life Plan Kodak Scan Station 700 Series Network Scanners Compositional Analysis This compositional analysis applies to model(s): Scan Station 700 Series Network Scanners. The following table identifies
Chemistry/Science Unit C1: Chemistry in Our World
Write your name here Surname Other names Edexcel GCSE Centre Number Chemistry/Science Unit C1: Chemistry in Our World Candidate Number Wednesday 9 November 2011 Morning Time: 1 hour You must have: Calculator,
Prevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
High Purity Acids Trace Elemental Analysis. Detect as low as 1 to 100 ppt
High Purity Acids Trace Elemental Analysis Detect as low as 1 to 100 ppt High purity acids If you are looking for acids, look no further. Whether you are analyzing environmental samples, etching glass,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ENVIRONMENTAL CONSERVATION LABORATORIES JACKSONVILLE 4810 Executive Park Court, Suite 111 Jacksonville, FL 32216 Lori S. Mangrum Phone: 904 296 3007 Email address:
Custom 450 Stainless Steel, UNS S45000
Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description
NCERT solutions for Metals and Non Metals
NCERT solutions for Metals and Non Metals 1 Question 1 Give an example of a metal which (i) is a liquid at room temperature. (ii) can be easily cut with a knife. (iii) is the best conductor of heat. (iv)
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
High-Purity Acids & Reagents
J.T.Baker Brand High-Purity Acids & Reagents Purity and consistency are essential for all reagent chemicals, particularly acids. Whether used for tracemetal analysis or for general use, aligning the correct
Covered with a thin layer of oxide at ordinary temperatures.
1 More about Metals Physical properties of metals In general metals have luster, are malleable and ductile, good conductors of heat and electricity and have high boiling and melting points and nonmetals
: Series 300 Stainless Steel Wire Brushes
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Series 300 Stainless Steel Wire Brushes 1.2. Relevant identified uses of the substance
Chemistry/Additional Science
Write your name here Surname Other names Pearson Edexcel GCSE Centre Number Candidate Number Chemistry/Additional Science Unit C2: Discovering Chemistry Higher Tier Wednesday 14 June 2017 Morning Time:
Time: 1 hour plus your additional time allowance
Paper Reference(s) 5CH1F/01 Edexcel GCSE Chemistry/Science Unit C1: Chemistry in Our World Foundation Tier Monday 21 May 2012 Morning Time: 1 hour plus your additional time allowance INSTRUCTIONS TO CANDIDATES
End of Life Plan. for Kodak i5000 Series. Scanners
End of Life Plan for Kodak i5000 Series Scanners Compositional Analysis This compositional analysis applies to the Kodak i5000 Series Scanners. The following table identifies the location of materials
Chapter 1.6. Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table. Diameter 100 mm 4-inch 150 mm 6-inch
Chapter 1.6 I - Substrate Specifications Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table Diameter 100 mm 4-inch 150 mm 6-inch Thickness 525 µm 20.5 mils 675
Chemistry/Science Unit C1: Chemistry in our World
Write your name here Surname Other names Edexcel GCSE Centre Number Chemistry/Science Unit C1: Chemistry in our World Candidate Number Thursday 1 March 2012 Morning Time: 1 hour You must have: Calculator,
Mathematics and Science in Schools in Sub-Saharan Africa
Mathematics and Science in Schools in Sub-Saharan Africa MATERIAL SCIENCE METAL ALLOYS Metals have many advantages Strong Malleable Conductors Shiny Metal Customizing Cold-working and heat treating metals
ALUMINUM CASTINGS 300 SERIES (Without Beryllium)
203 American Foundry Society Meets the Requirements of OSHA Standard 29 CFR 90.200 Hazard Communication and EPA Supplier Notification Requirements under Section 33 of the Emergency Planning and Community
Resources, Tools and Basic Information for Engineering and Design of Technical Applications! - adapts seamlessly to phones, pads and desktops! Search - "Search is the most efficient way to navigate the
Motorola Green Purchasing
Motorola Green Purchasing W18 and Material Declaration Population Introduction and Training Why is Motorola Mobility Moving to WPA? Motorola Mobility is making this change to: Upgrade our aging compliance
1. Hardness 2. Streak 3. Density 4. Crystal structure 5. A mineral must be a naturally occurring, inorganic. 7. c 8. f 9. a 10. d 11. g 12. e 13.
Properties of Guided Reading and Study Use Target Reading Skills Properties of I. What Is a Mineral? A. Naturally Occurring B. Inorganic C. Solid D. Crystal Structure E. Definite Chemical Composition II.
KKB Micro Testing Labs Pvt. Ltd., , 2 nd Floor, Tarun Plaza, NFC Main Road, Krishna Nagar Colony, Moula Ali, Hyderabad, Telangana
Last Amended on - Page 1 of 7 I. AIR, GASES & ATMOSPHERE 1. Ambient Air Monitoring RSPM ( PM 10) IS 5182 (Part 23): 2006 (RA ) 5 µg/m 3 to 750 µg/m 3 PM 2.5 SOP 11 dated 17.11.2014 12.5 µg/m 3 to 500 µg/m
SN100C Technical Guide
SN100C Technical Guide INTRODUCTION SN100C is a lead-free tin/copper//germanium alloy. It has been in use since about the year 2000. Since then SN100C has become a world leading alloy in wave and selective
ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
316Ti Stainless Steel, UNS S31635
316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic
AP* CHEMISTRY EQUATIONS BY TYPE
AP* CHEMISTRY EQUATIONS BY TYPE Double Replacement 1. Hydrogen sulfide is bubbled through a solution of silver nitrate. 2. An excess of sodium hydroxide solution is added to a solution of magnesium nitrate.
ACCEPTANCE OF METALLIC MATERIALS USED FOR PRODUCTS IN CONTACT WITH DRINKING WATER
st 1 Revision 30.03.11 ACCEPTANCE OF METALLIC MATERIALS USED FOR PRODUCTS IN CONTACT WITH DRINKING WATER 4MS Common Approach Part A Procedure for the acceptance Part B 4MS Common Composition List Adopted
Light Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
NONFERROUS METALS AND ALLOYS
NONFERROUS METALS AND ALLOYS Chapter 7 7.1 Introduction Usage of nonferrous metals and alloys has increased due to technology Possess certain properties that ferrous materials do not have Resistance to
ASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
ASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
Will accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
January 6, Mr. Richard Gillespie Executive Director TIGHAR 2366 Hickory Hill Road Oxford, PA Report of Findings.
January 6, 2015 Mr. Richard Gillespie Executive Director TIGHAR 2366 Hickory Hill Road Oxford, PA 19363 For: LTL Job #: Report of Findings R-48-20 Overview A comparison of the aluminum alloy chemistry
Discipline Chemical Testing Issue Date Certificate Number T-3553 Valid Until Last Amended on - Page 1 of 9
Last Amended on - Page 1 of 9 I. ORES & MINERALS 1. Iron Ore Total Iron IS 1493: 1981 (RA 2006) 10 % to 70 % Silicon IS 1493: 1981 (RA 2006) 0.5 % to 25 % Aluminum IS 1493: 1981 (RA 2006) 0.5 % to 20 %
These elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
Physical Science Chapter 19. Elements and Their Properties Quick Notes
Physical Science Chapter 19 Elements and Their Properties Quick Notes 1 19:1 A.Metals conduct heat and electricity, reflect light (luster); are malleable ( ) Can be hammered or rolled into sheets are ductile
SP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004
SP3S-AQ2-01 SPECIFICATIONS MODEL: TYPE: SPECIFICATION No. DATE OF ISSUE SPECIFICATIONS FOR: SP3S-AQ2-01 AIR QUALITY SENSOR S-0403-03 18 March, 2004 Dimensions 0.7 Status Name Date Original Junko Yanagitani
CERTIFICATE OF ANALYSIS REVISED REPORT
Your C.O.C. #: A122303 Attention: STEPHEN LEGAREE EDMONTON 9331 9331-48 Street EDMONTON, AB CANADA T6B 2R4 Report #: R1787645 Version: 2R CERTIFICATE OF ANALYSIS REVISED REPORT MAXXAM JOB #: B4B4991 Received:
COMPANY LOCATION APPROVED PROCESS SPECIFICATION
COMPANY LOCATION APPROVED PROCESS SPECIFICATION LOCKHEED MARTIN ORLANDO, FL ALUMINUM CHEMICAL FILM CLASS 1A AMS/MIL-C-5541E ALUMINUM CHEMICAL FILM CLASS 3 AMS/MIL-C-5541E APPLICATION OF PRIMER AND TOPCOAT
METALLIC MATERIALS SPECIFICATION HANDBOOK
METALLIC MATERIALS SPECIFICATION HANDBOOK METALLIC MATERIALS SPECIFICATION HANDBOOK FOURTH EDITION Robert B. Ross Ross Materials Technology Ltd, East Kilbride, Glasgow Volume I SPRINGER-SCIENCE+BUSINESS
SAFETY DATA SHEET BW 001 Solid Carbon steel wire electrodes & rods
Not for sale in the USA Ensure that this SDS is received by the appropriate person Section 1. IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING 1.1 Product identifier Trade name
3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
SAFETY DATA SHEET. CrossOver G Turf. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Harsco Metals & Minerals
Page 1 of 5 SAFETY DATA SHEET CrossOver G Turf Date Prepared : 05/30/2015 SDS No : 2015-10 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: CrossOver G Turf GENERAL USE: Soluble silicon fertilizer.
SILVER BRAZING Alloys and Fluxes Product Guide
SILVER BRAZING Alloys and Fluxes Product Guide PIKAS d.o.o. Brunov drevored 11 SI - 5220 TOLMIN Tel.: +386 5 381 03 84 Fax: +386 5 381 03 87 E-mail: pikas@pikas.si Internet: www.pikas.si UNIVERSAL SILVER
40-60 Delaware Ave, Sidney NY (P) / (F)
Introduction Amphenol Industrial & Aerospace Operations Products & Hazardous Materials Statement Amphenol Industrial & Aerospace Operations (AIAO), including both Military Aerospace and Industrial Operations,
AAS - Atomic Absorption Mono Element ppm Standard Solutions (Spectro ECON)
CL01.0105 CL01.0106 CL01.0107 CL01.0126 CL01.0127 CL01.0135 CL01.0136 CL01.0137 CL01.0138 CL01.0205 CL01.0206 CL01.0207 CL01.0216 Aluminium standard solution (Spectro ECON) 8.948 g AlCl3.6H2O / l H2O Solution
Galvanic Corrosion Prevention Guide for Water Cooling Systems
WATER COOLED DEVICES Galvanic Corrosion Prevention Guide for Water Cooling Systems November 2017 White Paper Created by Helen E. Kane, Advanced Energy Industries, Inc. Water Cooled Devices Abstract This
Metropolitan Water Reclamation District of Greater Chicago 10/19/ Mark Joyce Senior Mechanical Engineer Engineering Department
Metropolitan Water Reclamation District of Greater Chicago 10/19/201 2 Mark Joyce Senior Mechanical Engineer Engineering Department 1 Definition of Corrosion Corrosion is the deterioration of a substance
SAMPLE PAGES PAGES. Extraction of metals from metal oxides. mixture of iron sand and coal are heated as they move down kiln, by force of gravity
Unit 11.5 Metals and Non-metals Topic 3: Extraction of metals and corrosion In the previous two Topics we looked at the physical and chemical properties of metals. In Topic 3 we now examine how metals
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method