BRAZING & SOLDERING ALLOYS & FLUXES
|
|
|
- Brian Watts
- 5 years ago
- Views:
Transcription
1 YOUR COMPLETE SOURCE FOR BRAZING & SOLDERING ALLOYS & FLUXES
2 Name Description AWS Spec Composition % Temperature F Ag Cu Zn Sn Other Melt Flow Braze 560 Lowest temperature, Cadmium-free filler metal, very fluid alloy flow BAg Braze 505 Best general purpose filler metal available. Recommended for stainless steel as it retards interface corrosion. Nickel content provides superior adhesion to base metal surfaces. BAg Ni Braze 452 Low temperature, general-purpose alloy with better flow properties than Braze 450. BAg Braze 450 Braze 401 Braze 380 Easy Flo 45 General purpose filler metal for joining ferrous, non-ferrous and dissimilar metals with large joint clearances. A more economical filler metal with a fairly narrow melt range, this alloy has application for both steel and copper-based materials. Economical general purpose brazing alloy for joining both ferrous and nonferrous base metals. Free flowing. Versatile alloy, used for most ferrous and non-ferrous metals. Contains Cadmium, therefore exercise extreme caution as Cadmium fumes are toxic. BAg BAg BAg Cd Name Description L-M 1 Oz. Pkg 3 Oz. Pkg 5 Oz. Pkg Braze % Ag, Cd-Free 1/16" Dia. x Coil Braze % Ag, Cd-Free 1/16" Dia. x Coil Braze % Ag, Cd-Free 1/16" Dia. x Coil Braze % Ag, Cd-Free 1/16" Dia. x Coil Braze % Ag, Cd-Free 1/16" Dia. x Coil Easy-Flo 45 45% Ag, Cd-Bearing 1/16" Dia. x Coil Name Description L-M Braze % Ag, 3/32 Dia x 50 T.O. Box % Ag, 1/16 Dia x 50 T.O. Box % Ag, 3/64 Dia x 50 T.O. Box % Ag, 1/32 Dia x 50 T.O. Box Braze % Ag, 3/32 Dia x 50 T.O. Box % Ag, 1/16 Dia x 50 T.O. Box % Ag, 3/64 Dia x 50 T.O. Box % Ag, 1/32 Dia x 50 T.O. Box Name Description L-M Braze % Ag, 3/32 Dia x 50 T.O. Box % Ag, 1/16 Dia x 50 T.O. Box % Ag, 3/64 Dia x 50 T.O. Box % Ag, 1/32 Dia x 50 T.O. Box Easy-Flo 45 45% Ag, 3/32 Dia x 50 T.O. Box % Ag, 1/16 Dia x 50 T.O. Box % Ag, 3/64 Dia x 50 T.O. Box % Ag, 1/32 Dia x 50 T.O. Box 98305
3 Name Description L-M Braze % Ag, Flux cored,.075 Dia x 20-8 rods per tube Braze % Ag, Flux cored,.075 Dia x 20-8 rods per tube Braze % Ag, Flux cored,.075 Dia x 20-8 rods per tube Flux-Coated Rod Description L-M Braze % Ag, Cd-Free (yellow) 1/8 Dia. x 18 Rods x 1/4 pound tubes (8) Braze % Ag, Cd-Free (blue) 1/8 Dia. x 18 Rods x 1/4 pound tubes (8) Braze % Ag, Cd-Free (orange) 1/8 Dia. x 18 Rods x 1/4 pound tubes (8) Flux-Coated Rod Description L-M Braze % Ag, Cd-Free (orange) 1/8 Dia. x 18 Rods x 3 rods per tube Name Description L-M Handy Flux Handy B1 Flux Handy Liquid Flux 7 oz. Jar w/ brush cap 24 per case 1/4 lb. Jar 24 per case 1/2 lb. Jar 50 per case 1 lb. Jar 25 per case 5 lb. Jar 6 per case 25 lb. Pail 50 lb. Pail Boron Modified - 1 lb. Jar 25 per case Boron Modified - 5 lb. Jar 6 per case Boron Modified - 25 lb. Pail Boron Modified - 50 lb. Pail Liquid Flux-Pint 12 per case Liquid Flux-Quart 12 per case Liquid Flux-Gallon 4 per case
4 Name Description AWS Spec Composition % Temperature F Ag Cu P Melt Flow Sil-Fos 15 Handy-Flo 6 Sil-Fos 6i Best alloy for general copper-copper brazing in the Sil-Fos family. For copper-to-copper joints the phosphorus in the Sil-Fos product serves as the fluxing agent and no separate flux is necessary. For brass applications however, flux is recommended. For use where close fit-ups cannot be maintained Sil-Fos 15 works well to bridge gaps. Highest joint ductility of the entire Sil-Fos family to best withstand the stresses inherent in refrigeration applications. Slow Flow. Recommended for use where a close fit-up cannot be maintained. Has the ability to fill gaps and form fillets without affecting joint strength. Slow Flow. (formerly Sil-Fos 6M) A fluid filler metal that offers intermediate flow characteristics. An acceptable alternative to Sil-Fos 15 where vibration and thermal cycling stresses are not severe. BCuP F Sil-Fos 6 A very fluid filler metal for close fit-up work. Low melting range makes it ideal where temperature is a factor. Fast Flow. BCuP Sil-Fos 5 Designed primarily for those applications where close fit-ups cannot be maintained. It has the ability to fill gaps and form fillets without adversely affecting joint strength. Slow Flow. BCuP Sil-Fos 2 A filler metal with comparable characteristics to Fos-Flo 7. Medium Flow. BCuP Fos Flo 7 An economical, very fluid medium temperature filler metal for use with copper, brass and bronze. Withstands moderate vibration. Fast Flow. BCuP Name Description L-M Package Size Name Description L-M Package Size Sil-Fos 15 15% Ag Sil-Fos 6 6% Ag.125 x.050 x x.050 x Sq x 20 x 11 Rods.125 Sq x Sq x Sq x Sq x Dia x Dia x Plastic Tube 5 lb. Tube 10 lb. Carton Handy-Flo 6% Ag Sil-Fos 5 5% Ag Sil-Fos 2 2% Ag Fos Flo 7 0% Ag.125" Sq x 36".125 x.050 x 20" Sil-Fos 6i 6% Ag x 1# x 25# Name Description L-M Package Size Sil-Fos 15 15% Ag x 8 rods rods per tube Sil-Fos 5 5% Ag x 8 rods rods per tube Handy-Flo 6 6% Ag x 8 rods rods per tube Name Description Composition % Temperature F Sn Pb Melt Flow Solderite 50/50 Standard general purpose Tin/Lead solder for moderate joint clearances. Available as Solid, Acid or Rosin core Name Description L-M Solderite 50/50 1/8" Dia x 1# Spool Solderite 50/50 Acid Core 1/8" Dia x 1# Spool 96060
5 Name Description Composition % Temperature F Clean n Brite 6 Clean n Brite Clean n Brite No Lead Clean n Brite 95/5 Lead-free, silver-bearing high-strength solder used for applications requiring large joint clearances. Easiest Silver-bearing soft solder to work with as temperature range permits bridging loose fit-ups if necessary. Lead-free, silver-bearing high-strength solder used for applications requiring close joint clearances. Silver-bearing solder with good strength used in potable water system applications requiring no lead. Ag Cu Sn Other Melt Flow General purpose Tin/Antimony solder. Not for use on brass alloys Sb Name Description L-M Clean 'n Brite 6 1/8" Dia x 1# Spool Clean 'n Brite 1/8" Dia x 1# Spool 1/16" Dia x 1# Spool Clean 'n Brite-No Lead 1/8" Dia x 1# Spool Clean 'n Brite 95/5 1/8" Dia x 1# Spool Name Description Composition % Temperature F Zn Al Melt Flow AL 802 Flux cored solder AL 822 Flux cored braze Name Description L-M AL 802 Solder.078" Dia x 20" x 4 Sticks per tube AL 822 Braze.090 Dia x 20 x 4 Sticks per tube Name Description L-M TEC Liquid Soldering Flux Clean 'n Brite Paste Soldering Flux 4 oz. Squeeze Bottle 24 or 48 per case 16 oz. Bottle (Pint) 12 per case 128 oz. Bottle (Gallon) 4 per case 4 oz. Jar w/ Brush Cap 24 per case
6 SIZE CHART = 1/32 (.031 ) =.075 (Handy 1) = 3/64 (.047 ) = 1/16 (.062 ) = 3/32 (.094 ) =.078 (Aluminum Solder) =.125 (Square) =.125 x.050 (Flat Rod) = 1/8 (.125 ) ATOMIC SYMBOLS Ag = Silver Ni = Nickel Sn = Tin Cu = Copper Cd = Cadmium P = Phosphorus Zn = Zinc Al = Aluminum Pb = Lead Sb = Antimony Warning! Brazing can generate potentially harmful fumes and gases. Protect yourself and others. Obtain a Material Safety Data Sheet (MSDS) from your supplier or from Lucas-Milhaupt, Inc. Follow the MSDS instructions for safe brazing practices and appropriate measures.
7
8
Aluminum Filler Metals
Aluminum Filler Metals Aluminum brazing and soldering filler metals are used to join materials within the aluminum family of alloys. These materials are available in wire, strip, powder, paste (both corrosive
SILVER BRAZING Alloys and Fluxes Product Guide
SILVER BRAZING Alloys and Fluxes Product Guide PIKAS d.o.o. Brunov drevored 11 SI - 5220 TOLMIN Tel.: +386 5 381 03 84 Fax: +386 5 381 03 87 E-mail: pikas@pikas.si Internet: www.pikas.si UNIVERSAL SILVER
THE HARRIS PRODUCTS GROUP Orders: HVAC/R & PLUMBING CATALOG FILLER METAL CHARTS
HVAC/R & PLUMBING CATALOG FILLER METAL CHARTS 1 1 THE HARRIS PRODUCTS GROUP HAS BEEN MANUFACTURING QUALITY BRAZING PRODUCTS FOR OVER 110 YEARS. EACH DAY, HARRIS SETS OUT TO MAKE THE BEST AND MOST COMPLETE
Silver brazing alloys and fluxes PRODUCT GUIDE
Silver brazing alloys and fluxes PRODUCT GUIDE UNIVERSAL SILVER ALLOYS CADMIUM FREE Silver alloy Composition % Melting Operating Tensile International norms Density range temp. strength Ag Cu Zn Other
alloys Our company is certified ISO 9001, by BVQI. We aim at giving you the best quality-price ratio, whilst maintaining customer satisfaction.
www.fsh-welding.com Expert in Brazing REBOUD-ROCHE, a Member of the «FSH WELDING GROUP», presents the most comprehensive range of brazing alloys available today. The company, which exists for more than
TECHNICAL DATA SHEET 30
506 TECHNICAL DATA SHEET 30 Braze Welding Alloy with 6 Nickel Cu-Zn-Ni 900 - - - - 506 is basically an alloy of copper and zinc with 6 Nickel, which enhance the mechanical properties as compared to CUPROX.
What you should know about Brazing
What you should know about Brazing By Leif Andersen, Technical Product Manager Welding, WSS When doing brazing, the parent material is not melted as in welding but brought to the bonding temperature. The
Dissimilar Metals DISSIMILAR METALS. Weld Tech News VOL 1. NO. 14
Dissimilar Metals Weld Tech News VOL 1. NO. 14 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
PERSENDA s.n.c MONCALIERI (IT)
s.n.c. 10024 - MONCALIERI (IT) www.paginegialle.it/persenda persenda@virgilio.it SOLID SOLDER WIRES DESCRIPTION: made in "ecological" alloys, free from Lead, have been formulated as a good alternative
EVALUATION OF NEW SILVER-FREE BRAZING FILLER METALS PART 2: BRAZING OF COPPER AND BRASS
EVALUATION OF NEW SILVER-FREE BRAZING FILLER METALS PART 2: BRAZING OF COPPER AND BRASS The results of wetting and shear strength testing, and metallurgical characterization, of Cu-4Sn- 6P and Cu-40Zn-1Sn-0.3Si
Al-Si 590 Al 112 BAlSi-4 L-Al Si 12 B-Al88Si
HARASIL NC12 TBW TECHNICAL DATA SHEET 409B Seamless Flux Cored Brazing Wire for Aluminium Alloys Al-Si 590 Al 112 BAlSi-4 L-Al Si 12 B-Al88Si-575-585 - HARASIL NC 12 TBW Seamless tubular wire of AlSi12
HVAC/R & PLUMBING CATALOG
HVAC/R & PLUMBING CATALOG About The Harris Products Group The Harris Products Group is an American based company with quality expectations that are the highest in the industry. We provide our customers
HARRIS PRODUCTS GROUP. The Harris Products Group
The Harris Products Group, A Lincoln Electric Company, is a world leader in the design, development and manufacture of cutting, welding, brazing, soldering equipment, consumables and gas distribution systems.
Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
Copper Alloy. LEADED Red BRASS ( ) C Al Amana Foundry We Make The Quality By Experience And Science
LEADED Red BRASS (85-5-5-5) C83600 Tensile Strength, Ksi 30 Tensile Strength, Mpa 207 Yield Strength, Ksi 14 Yield Strength, Mpa 97 Elongation in 2 inch 20 Density g/cm3 8.83 Electrical Conductivity IACS
SALDFLUX srl via Friuli, Fizzonasco di P. E. (Milano) Italy Vat Nr IT REA Tel. : (+39) (+39)
SALDFLUX srl via Friuli, 5 20090 Fizzonasco di P. E. (Milano) Italy Vat Nr IT08049640967 - REA 2000301 Tel. : (+39) 02 907 81 812 - (+39) 02 904 20 251 Fax : (+39) 02 907 84 933 - (+39) 02 904 20 217 e-mail:
WELDING Topic and Contents Hours Marks
Topic and Contents Hours Marks 3.1 Introduction 04 Marks Classification and selection of welding process. Working principle of Gas welding and types of flames. 3.2 Arc welding process 08 Marks Metal arc,
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
A recognised ability Industrial Thessco Group in the field of brazing Products Range in Europe Brazing Products alloys THESSCO LIMITED
Brazing Products A recognised ability in the field of brazing alloys The Thessco Group is one of the world s largest manufacturers of Silver Brazing Alloys, Metal Joining products and Industrial Silver
Brazing Alloy and Industrial Silver Alloy Catalogue
Brazing Alloy and Industrial Silver Alloy Catalogue Heritage 3 General Purpose Silver Brazing Alloys 4 Flux-Coated Silver Brazing Alloy Rods 5 Ternary Brazing Alloys 6 Flux 7 Phosphorus Brazing Alloys
Chase Brass CMX. Partners With. 7/10/07 Page 1
& Chase Brass Partners With CMX 7/10/07 Page 1 & Sambo Copper ECO BRASS - a new alloy for the 21 st Century Green Dot and ECO BRASS is a lead-free brass alloy developed by Sambo Copper Alloy Company. The
PRODUCT PROFILE ELECTROLOY LEAD FREE BAR
PRODUCT PROFILE ELECTROLOY LEAD FREE BAR Product Name Product Code SOLDER BAR LEAD FREE ALLOY Sn99.3/Cu0.7+Ni LF- 801B LEAD FREE ALLOY Sn99.6/Cu0.4+Ni LF- 801BE ( TOP UP ALLOY ) The information and statements
SPECIFICATION FOR COPPER AND COPPER ALLOY BARE WELDING RODS AND ELECTRODES
SPECIFICATION FOR COPPER AND COPPER ALLOY BARE WELDING RODS AND ELECTRODES SFA-5.7 (Identical with AWS Specification A5.7-84R.) Scope This specification prescribes requirements for the classification of
METALES DE APORTACION, S.A.
METALES DE APORTACION, S.A. Carretera General s/n, 39792-Gajano (Cantabria) SPAIN BRAZING ALLOYS AND FLUXES Medasa, Metales de Aportación, S.A. - 2014 Electronic version to unload from www.medasa.com Introduction
LIGHTFIELD CORPORATION M.S.D.S. SHEET NO. LFH-1001
LIGHTFIELD AMMUNITION CORPORATION P.O. Box 162, Adelphia, NJ 07710 732-462-9200 Fax 732-780-2437 www.lightfieldslugs.com (Research & Development) lacsabot@optonline.net (Headquarters) LIGHTFIELD CORPORATION
Misc Accessories. Part # Size Case Qty 50/50. Part # Size Case Qty /2 lb SILVER BRAZING FLUX PASTE
F-A-S-T 50/50 & 95/5 - FLUX & SOLDER COMBINATION 50/50 32007... 1 lb.... 24 95/5 32707... 1 lb.... 12 Premium grad of flux and solder combination. Combines virgin 50/50 or 95/5 finely powdered solder with
Safety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
Nicrobraz Stop-Off Materials
Nicrobraz Stop-Off Materials The comprehensive range of Nicrobraz Stop-Off products meet the needs of almost all applications Nicrobraz Stop-Off materials are designed to protect metal surfaces from the
BOSHART INDUSTRIES Telephone: Toll Free: Fax:
0- Available in cast bronze or cast brass body and poppet NBR "O"-Ring Seal (Nitrile Buna-N) BRONZE OR BRASS CHECK VALVE BRONZE 7CV050 7CV075 7CV00 7CV25 7CV50 7CV200 7CV300 7CV400 9.34 2.88 8.26 28.62
BRAZING. Filler metals and fluxes CATALOGUE
BRAZING Filler metals and fluxes CATALOGUE index BRAZING STELLA srl is an Italian manufacturer of brazing alloys specialized in providing complete solutions in Brazing, Soldering and Welding applications.
Alloys and Solid Solutions
Alloys and Solid Solutions Chemistry 123 Spring 2008 Dr. Woodward Solutions Solid Solution 14 Carat Gold Liquid Solution Vodka Gaseous Solution Air Solution = A homogeneous mixture 1 Alloys An alloy is
Complete Solder Solutions
Complete Solder Solutions A NORDSON COMPANY 1 Our Vision EFD Solder Paste Group is the service leader in the solder dispensing market, delivering integrated process solutions through best-in-class performance
Allegro MicroSystems, Inc.
Allegro MicroSystems, Inc. Materials Declaration Report 4/30/2008 11:08:31AM Report ID: MDR4118LW1672JFTR Allegro Part #: A6841SLWTR-T B.O.M. ID: 106 Package Code: LW / LW Lead Count: 18 Assy Location:
Castolin Eutectic. Brazing Technology. Stronger, with. Castolin Eutectic. EcoBraz OEM Catalogue
Castolin Eutectic Brazing Technology Stronger, with Castolin Eutectic EcoBraz OEM Catalogue Contents EcoBraz - Solutions for OEM Wide Selection of Coatings... 3 CadFree Silver Alloys... 4 Silver Cadmium
Introduction to Copper and Copper Alloys. James Michel Manager, Technical Services Copper Development Association Inc. May 2013
Introduction to Copper and Copper Alloys James Michel Manager, Technical Services Copper Development Association Inc. May 2013 CDA Mission The Copper Development Association, Inc. is a not-for-profit trade
Materials & Processes in Manufacturing
2003 Bill Young Materials & Processes in Manufacturing ME 151 Chapter 37 Arc Processes Chapter 38 Resistance Welding Chapter 39 Brazing and Soldering 1 Introduction Arc welding processes produce fusion
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
Small-Scale Resistance Welding for Medical and Industrial Applications
Small-Scale Resistance Welding for Medical and Industrial Applications Girish P. Kelkar, Ph.D. (author of The Weld Nugget ) http://www.welding-consultant.com/ Excellence In Material Joining Difference
www-materials.eng.cam.ac.uk/typd
Part IB Paper 3: MATERIALS Examples Paper 3/1: TEACH YOURSELF PHASE DIAGRAMS This examples paper forms part of an interactive online resource Teach Yourself Phase Diagrams which is available at: www-materials.eng.cam.ac.uk/typd
Tubolit Split & DuoSplit Alu
Tubolit Split & DuoSplit Alu An economic alternative to copper Why aluminum in HVACR? Aluminum remains one of the most cost-effective materials you can use outstanding t properties which h enable considerable
Introduction to the phase diagram Uses and limitations of phase diagrams Classification of phase diagrams Construction of phase diagrams
Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Concept of alloying Classification of alloys Introduction to the phase diagram Uses and limitations of phase diagrams Classification of phase diagrams
PANORAMA OF BRAZING PRODUCTS
EDITION 2 PANORAMA OF BRAZING PRODUCTS Complete programme (CuP, CuP-Ag, Ag, Brass, Al, etc.) State of art manufacturing process The only brazing foundry in France Development of products as per to customer
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
Brazing & Braze Welding With Oxyacetylene
Brazing & Braze Welding With Oxyacetylene 1 Definition A group of process that use heat to melt a metallic bonding agent, but not the base metal. The adhesion quality of the bonding agent binds the parts
Copper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
7.3 Bonding in Metals > Chapter 7 Ionic and Metallic Bonding. 7.3 Bonding in Metals. 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds
Chapter 7 Ionic and Metallic Bonding 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds 7.3 Bonding in Metals 1 Copyright Pearson Education, Inc., or its affiliates. All Rights Reserved. CHEMISTRY & YOU What
Alloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
aluminium - copper welding alloys wires & rods
w w w. s a f r a s p a. c o m aluminium - copper welding alloys wires & rods w w w. s a f r a s p a. c o m aluminium - copper welding alloys wires & rods Safra Spa Aluminium Alloys Formats available Aluminium
Plasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
Analysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000
C112-0514M Analysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000 Copper alloys are designated by their chemical composition with characteristic properties such as high corrosion resistance,
BROQUETAS LA SOLDADURA SEGURA THE RELIABLE SOLDER
BROQUETAS LA SOLDADURA SEGURA THE RELIABLE SOLDER BRAZING MATERIALS MATERIALES SOLDADURA FUERTE MANUFACTURERS SINCE 1930 FABRICANTES DESDE 1930 BROQUETAS S.L. is a family business, founded in 1930, and
Test Report No.: NBHL SD Date: SEP. 20, 2016 Page: 1 of 6
Test Report No.: NBHL1609012967SD Date: SEP. 20, 2016 Page: 1 of 6 NINGBO BATHING INT'L IND CO.,LTD 608, FORTUNE PLAZA, 77 HEYI STREET, NINGBO, CHINA The following sample(s) was/were submitted and identified
Global Supplier. of Soldering. and Brazing. Preforms
Global Supplier of Soldering and Brazing Preforms www.ametekmetals.c Responding quickly, precisely and efficiently to our customers needs Yes, we do. Our primary business at Coining is the fabrication
COMPARISON OF WELDING/BONDING METHODS
TYPE OF WELDING/BONDING Adhesive Bonding Diffusion Welding Electron Beam Welding Explosive Welding SUMMARY ADVANTAGES DISADVANTAGES Bond is established through use of an intermediate adhesive layer applied
These elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
Copper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
Copper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
Room Temperature Metal Blackening & Antiquing Processes. Hot & Mid Temp Oxide Finishes Metal Cleaning & Surface Preps
Specialty Chemical Manufacturer for the Plating and Metal Finishing Industries Where Finishing Excellence Begins Plating Processes Room Temperature Metal Blackening & Antiquing Processes Hot & Mid Temp
Copper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
Par-Test. Fluid Analysis
Fluid Analysis 195 Fluid analysis has proven to be a critical tool for any preventive maintenance program. Fluid analysis is able to identify potential problems that cannot be detected by human senses.
SN100C Technical Guide
SN100C Technical Guide INTRODUCTION SN100C is a lead-free tin/copper//germanium alloy. It has been in use since about the year 2000. Since then SN100C has become a world leading alloy in wave and selective
Then the number of degrees of freedom (F) of the system is related to the number of components (C) and the number of phases (P) as follows:
1 PHASE RULE Let the equilibrium between a number of phases be not influenced by gravity, electrical or magnetic forces, but only by pressure, temperature and concentration. Then the number of degrees
Welding Processes. Consumable Electrode. Non-Consumable Electrode. High Energy Beam. Fusion Welding Processes. SMAW Shielded Metal Arc Welding
Fusion Consumable Electrode SMAW Shielded Metal Arc Welding GMAW Gas Metal Arc Welding SAW Submerged Arc Welding Non-Consumable Electrode GTAW Gas Tungsten Arc Welding PAW Plasma Arc Welding High Energy
Copper & Copper Alloys
Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
Lecture 23. Chapter 30 Fusion Welding Processes. Introduction. Two pieces are joined together by the application of heat
Lecture 23 Chapter 30 Fusion Welding Processes Introduction Fusion welding Two pieces are joined together by the application of heat Melting and fusing the interface Filler metal Extra metal added (melted)
Specification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564
ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied
ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY
ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY DESCRIPTION Sn96.5Ag3Cu0.5 and Sn95.5Ag4Cu0.5 are lead-free alloys suitable for use as a replacement for Sn63 alloy. The Sn97Ag3 and Sn96Ag4
POTTING & ENCAPSULATING
POTTING & ENCAPSULATING ASSEMBLY PRODUCTS 38 POTTING & ENCAPSULATING Potting and Encapsulating Compounds are used to provide mechanical reinforcement to housed assemblies, to fill large voids, and to protect
Team Metal Finishing Inc.
Team Metal Finishing Inc. Available Processes: Anodizing Hard Coating Electroless Nickel Sulfamate Nickel Bright and Matte Nickel Silver Plating Gold Plating Tin Plating Chromate Conversion Coatings Immersion
EML 2322L -- MAE Design and Manufacturing Laboratory. Welding
EML 2322L -- MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
Test Report No.: NBHL SD Date: SEP. 20, 2016 Page: 1 of 5
Test Report No.: NBHL1609012853SD Date: SEP. 20, 2016 Page: 1 of 5 NINGBO BATHING INT'L IND CO.,LTD 608, FORTUNE PLAZA, 77 HEYI STREET, NINGBO, CHINA The following sample(s) was/were submitted and identified
Copper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
Products and Solutions for Heat Exchangers Producers
TM Products and Solutions for Heat Exchangers Producers Our mission is to support you in improving all aspects of your brazing processes... time and time again. Welcome Pietro Galliani Brazing S.p.A is
FEATURES AND BENEFITS
METAL RESCUE Rust Remover Bath is your clean, safe and easy solution to removing rust from iron and steel. Metal Rescue utilizes a unique and selective chelating agent to remove rust (iron oxide) without
The Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW)
The Everyday Pocket Handbook for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW) Number 4 in a series Compiled as a useful tool for on-the-job welding personnel by the AWS Product Development
MATERIALS TECHNOLOGY LABORATORY DESIGN PARAMETERS FOR LEAD-FREE COPPER-BASE ENGINEERING ALLOYS IN PERMANENT MOLDS
MATERIALS TECHNOLOGY LABORATORY DESIGN PARAMETERS FOR LEAD-FREE COPPER-BASE ENGINEERING ALLOYS IN PERMANENT MOLDS F.A. Fasoyinu, D. Cousineau, R. Bouchard, M. Elboujdaini and M. Sahoo EXECUTIVE SUMMARY
Electrical conductivity
Electrical conductivity Ohm's Law: voltage drop (volts = J/C) C = Coulomb A (cross sect. area) ΔV = I R Resistivity, ρ and Conductivity, σ: -- geometry-independent forms of Ohm's Law resistance (Ohms)
Chapter 6. Copper and Copper Alloys. /MS371/ Structure and Properties of Engineering Alloys
Chapter 6 Copper and Copper Alloys Overview of copper alloys Main characteristics High electrical, ease of Relative electrical and thermal conductivities (at 20 o C) Overview of copper alloys Cu + Zn (
Copper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
*This report is combined with 18 copies of report which provides by client*
Page : 1 of 10 The following merchandise was(were) submitted and identified by the client as : Type of Product : Style/Item No : Sample Received : Testing Date : THERMOSTATS T20, T23, T24, T26, T27 SERIES
Chapter 6. Copper and Copper Alloys. /MS371/ Structure and Properties of Engineering Alloys
Chapter 6 Copper and Copper Alloys Overview of copper alloys Main characteristics High electrical, ease of Relative electrical and thermal conductivities (at 20 o C) Overview of copper alloys Cu + Zn (
SnAg3.5 (CLF5013) Halide Free No Clean Core Wire
Pb SnAg3.5 (CLF5013) Halide Free No Clean Core Wire INTRODUCTION With implementation of stringent manufacturing process, Asahi has developed a wide range of wires with diverse alloys and flux types to
Condenser Coils. Applications: Coil construction is available for Condenser, Desuperheater, and Reheat applications.
Condenser Coils Coil construction is available for Condenser, Desuperheater, and Reheat applications. Applications: Condenser - This coil takes the superheated vapor from the compressor and cools that
VITROBRAZE. Amorphous Brazing Foils. Internet Version 06/2008. DSC Signal
VITROBRAZE Amorphous Brazing Foils 1.4 1.2 1 DSC Signal 0.8 0.6 0.4 0.2 0-0.2 800 900 1000 1100 Temperature C www.vitrobraze.com Internet Version 06/2008 Advanced Materials - The Key to Progress VACUUMSCHMELZE
Report No.: UNI RR-04 Page 1 of 8. Test Report
Report No.: UNI2017040523RR-04 Page 1 of 8 Test Report Report No: UNI2017040523RR-04 Date: Apr., 05, 2017 Applicant : Sinoglow Industrial Co., Ltd. Address : #10, Weier Road, Tangshan Industrial Park,
Corrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Partial Immersion Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
SnAg3.0 (CLF5013) Halide Free No Clean Core Wire
Pb SnAg3.0 (CLF5013) Halide Free No Clean Core Wire INTRODUCTION With implementation of stringent manufacturing process, Asahi has developed a wide range of wires with diverse alloys and flux types to
Services SAMPLE SUMMARY REPORT DR. PUMP, LLC Isuzu Rodeo. Atlanta, GA 05/24/2007
SAMPLE SUMMARY REPORT 7 Portage Trail 8.48.R 7 E A L 5.6.7 Fax:.6.7 44. 57 Report Date: 5/4/7 Primay Contact: Dr. Lev Nelik, PhD 977 Four Oaks Drive 6-75 Secondary Contact: None Provided Voice: None Provided
Sn63Pb37 No Clean Solder Wire Technical Data Sheet
Description The 486 4867 Sn63Pb37 No Clean Solder Wire is an electronic grade solder wire. It uses the eutectic tin-to-lead alloy ratio, which is complemented with a no clean, synthetically refined, splatter-proof,
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS 1 CHAPTER 7 : 2 METALS 3 Which of these things are
1. Soluble Lead Content Test on Metal Toy Accessories Pass. 2. Heavy Elements Analysis Pass Toxic Element Migration Test Pass
Applicant: DONGGUAN JIAN PLASTIC & METAL PRODUCTS Date: Mar 23, 2015 LTD. NO.3-1, SOUTH GAOBU BLVD GAOBU, DONGGUAN, CHINA ZIP CODE: 523278 Attn: EMMY Sample Description: Two (2) pieces of submitted sample
Cannot be strengthened (precipitation hardening) Strength can be increased only through cold-work Three main groups : 1xxx, 3xxx and 5xxx series
1. Aluminium (Al) Extremely useful engineering material o has low density (2.70 g/cm3) o good corrosion resistance in most natural environment o non-toxic : suitable for food containers and packaging o
Unit I PART I. MATH TOOLS FOR CHEMISTRY I. The Metric System The metric system is the scientific system of units of measurement
CHEMISTRY 100 LECTURE Unit I PART I. MATH TOOLS FOR CHEMISTRY I. The Metric System The metric system is the scientific system of units of measurement Length Volume Mass METRIC BASIC UNITS LENGTH MASS VOLUME
GreenBraz. New Formulations. Boric Acid Borax Cadmium
Better for the environment - Better for your productivity Braz New Formulations A newly developed range of brazing products. Entirely reformulated by our scientists to eliminate Boric Acid, Borax and Cadmium.
RITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
Williams Metals. Providing Welding & Metals Solutions for Over 50 Years. Welding Filler Metals. Setting the Standard for Excellence.
Williams Metals and Welding Alloys, Inc. Providing Welding & Metals Solutions for Over 50 Years Welding Filler Metals Setting the Standard for Excellence. Williams Metals and Welding Alloys is a multi-location
Global Journal of Engineering Science and Research Management
DIFFUSION BONDING OF AL ALLOY USING DIFFERENT IINTERLAYERS Assist. Prof. Dr. Ahmed A. Akbar*, Samer K. Khaleel * Asst. Prof. Dr. at University of Technology, Production Engineering and Metallurgy, Iraq