CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE

Transcription

1 12770 Rue Brault, Mirabel QC, J7J 1P3 Sans Frais / Toll Free Tel. : Fax : mtr@boulonsplus.net CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE SVP PRENDRE NOTE QUE L'ASSEMBLAGE SUIVANT A ÉTÉ PRODUIT PAR BOULONS PLUS INC. ET NOMMÉ D'APRÈS LE NUMÉRO DE D'ASSEMBLAGE DU BOULON, DE L'ÉCROU AINSI QUE DE LA RONDELLE. PLEASE TAKE NOTE THAT THE FOLLOWING ASSEMBLY WAS DONE BY BOULONS PLUS INC. AND NAMED AFTER THE SET NUMBER MADE FROM THE BOLT, THE NUT AND THE WASHER. SET # /4 X 4 1/4 A325-1 USA SET BLT+A563-C+F436-1 PL BOULON / BOLT LOT # CHARTER ÉCROU / NUT LOT # INFASC RONDELLE / WASHER LOT # D0235 PRESTA PLACAGE / GALVANISATION # PLATING / GALVANISATION # L ANALYSE CHIMIQUE PROVIENT DU FOURNISSEUR D ACIER. ESSAIE DE CAPACITÉ ROTATIVE AVEC INDICATEUR DE TENSION. RÉSULTAT D ESSAI = ACCEPTÉ. L ASSEMBLÉE RENCONTRE LES EXIGENCES DE LA NORME ASTM A ÉCROUS LUBRIFIÉS. CHEMICAL ANALYSIS COMES FROM THE STEEL COMPANY. RC TEST DONE WITH TENSION MEASURING DEVICE. ROTATIONAL CAPACITY TEST = PASSED ASSEMBLY MEETS THE REQUIREMENTS OF THE ASTM A325 STANDARD. - NUTS LUBRICATED. Sylvain Vaudry, Assurance-Qualité / Authorized test Clerk

2 TEST REPORT Operations Center 3281 West County Road 0 NS Frankfort, IN T F Ship Date Certification *1*1 Report Date Boulons Plus rue Brault Mirabel, PQ J7J 1P3 Cust PO Lot Nbr Quantity 275 Mfg Date Part Number Description 3/4-10 X 4 1/4 F3125 A325-1 HEAVY HEX STRUCTURAL DOUBLE MADE IN USA PART INFORMATION Finish PLAIN Head Marking A325 LE USA RAW MATERIAL ANALYSIS Steel Heat Nbr Steel Supplier Steel Grade Code Element Rqd Min Pct Rqd Max Pct Percent CR Charter Steel 30MnCrB1 C Mn P S Si Ni Cr Mo Cu Al B Ti Carbon 0.30 Manganese 0.85 Phosphorus Sulfur Silicon Nickel 0.00 Chromium 0.15 Molybdenum 0.07 Copper 0.00 Aluminum Boron Titanium Certification test results include those reported by the following laboratories: Charter Steel, A2LA, Fontana Fasteners, Inc., ISO17025-A2LA Cert# , Wedge Angle 10 Proof Load 28400/85000 (lbs/psi) MECHANICAL PROPERTIES Test Performed Required High Low Average Samples Tensile, PSI / Proof Load Elongation / Superficial R30N 45 / Core Hardness, HRC 25 /

3 TEST REPORT Operations Center 3281 West County Road 0 NS Frankfort, IN T F Ship Date Certification *1*1 Report Date Boulons Plus rue Brault Mirabel, PQ J7J 1P3 Cust PO Lot Nbr Quantity 275 Mfg Date Applicable Standards, Specifications, and Sampling Schemes: For Non Structural Product:Test methods in accordance to ASTMF606/ISO where applicable.sampling plan in accordance to ASTM F1470. Thread fit and dimensional properties are compliant to ASME B Mechanical properties are according to SAE J429 or ISO were applicable. Bolts passed a surface discontinuity inspection per ASTM F788. These bolts were manufactured in the USA from domestic material and were not produced from heat in which Bismuth, Selenium, Tellurim, or Lead was intentionally added. Bolts were not exposed to Mercury or any other metal alloy that is liquid at ambient temperature during processing or while in our possession. The listed standards, specifications, and sampling schemes are of the revision in effect on the date of manufacture unless noted otherwise. Only those standards specifically noted under "test methods" or "additional test methods" are included on LE's scope of laboratory accreditation. Additional Information None This lot has been found to conform to the requirements of the above standards and specifications We certify: The product furnished by Fontana Fasteners, Inc. was manufactured, sampled, tested, and inspected in accordance with the standards and specifications listed above and with Fontana Fasteners, Inc. Quality Manual in effect as of the date of manufacture. The above data accurately represents values provided by Fontana Fasteners, Inc. suppliers and/or values generated in one of Fontana Fasteners, Inc. A2LA accredited laboratories. This test report relates only to the sample tested above. This document may only be reproduced unaltered and may not be used for any purpose other than the purpose of certifying the same or lesser quantity of the product specified herein. Reproduction, alteration or use of this document for any other purpose is prohibited, except as expressly provided in this certification. Fontana Fasteners, Inc. makes no (and disclaims all) representations, warranties and guarantees whatsoever, whether express, implied or statutory, including, without limitation, any warranty of merchantability or fitness for a particular purpose. CERT # "MECHANICAL FIELD OF TESTING"

4 Janice Barnard Manager of Quality Assurance Rem: Load1,Fax0,Mail0 Printed Date : 07/27/2015 Page 1 of 2 Melted in USA Manufactured in USA CHARTER STEEL TEST REPORT Fontana Fasteners Inc 3595 West State Road 28 Frankfort,IN Cust P.O Customer Part # A1 Charter Sales Order Heat # Ship Lot # Grade LEBA1 M SK FG RHQ 25/32 Process HRCC Finish Size 25/32 Ship date 27-JUL-15 I hereby certify that the material described herein has been manufactured in accordance with the specifications and standards listed below and that it satisfies these requirements. The recording of false, fictitious and fraudulent statements or entries on this document may be punishable as a felony under federal statute. Test results of Heat Lot # Lab Code: 7388 CHEM C MN P S SI NI CR MO CU SN V %Wt JOMINY(HRC) AL N B TI NB J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 J11 J J13 J14 J15 J16 J18 J20 J JOMINY LAB= JOMINY SAMPLE TYPE ENGLISH=R DI=3.11 Test results of Rolling Lot # # of Tests Min Value Max Value Mean Value TENSILE (KSI) TENSILE LAB = REDUCTION OF AREA (%) RA LAB = ROCKWELL B (HRBW) RB LAB = ROD SIZE (Inch) ROD OUT OF ROUND (Inch) NUM DECARB=1 AVE DECARB (Inch)=.005 REDUCTION RATIO=63:1 Specifications: Manufactured per Charter Steel Quality Manual Rev Date 9/12/12 Meets customer specifications with any applicable Charter Steel exceptions for the following customer documents: Customer Document = LE 1.1 Revision = 9 Dated = 27-NOV-07 Additional Comments: GRADE 30 Cr Mn B1 Charter Steel Saukville, WI, USA This MTR supersedes all previously dated MTRs for this order

5 The following statements are applicable to the material described on the front of this Test Report: 1. Except as noted, the steel supplied for this order was melted, rolled, and processed in the United States meeting DFARS compliance, LEEDS compliance, REACH compliance, ROHS-WEEE compliance, and Conflict Materials Restrictions. 2. Mercury was not used during the manufacture of this product, nor was the steel contaminated with mercury during processing. 3. Unless directed by the customer, there are no welds in any of the coils produced for this order. 4. The laboratory that generated the analytical or test results can be identified by the following key: Certificate Number Lab Code Laboratory Address CSSM Charter Steel Melting Division 1658 Cold Springs Road, Saukville, WI CSSR/ CSSP Charter Steel Rolling/ Processing Division 1658 Cold Springs Road, Saukville, WI CSFP Charter Steel Ohio Processing Division 6255 US Highway 23, Rising Sun, OH CSCM/ Charter Steel Cleveland 4300 E. 49th St., Cuyahoga Heights, OH CSCR * * -- Subcontracted test performed by laboratory not in Charter Steel System 5. When run by a Charter Steel laboratory, the following tests were performed according to the latest revisions of the specifications listed below, as noted in the Charter Steel Laboratory Quality Manual: Test Specifications CSSM CSSR/ CSSP Chemistry Analysis ASTM E415; ASTM E1019 X X Macroetch ASTM E381 X X Hardenability (Jominy) ASTM A255; SAE J406; JIS G0561 X X Grain Size ASTM E112 X X X X Tensile Test ASTM E8; ASTM A370 X X X Rockwelll Hardness ASTM E18; ASTM A370 X X X X Microstructure (spheroidization) ASTM A892 X X Inclusion Content (Methods A, E) ASTM E45 X X Decarburization ASTM E1077 X X X CSFP CSCM/ CSCR Charter Steel has been accredited to perform all of the above tests by the American Association for Laboratory Accreditation (A2LA). These accreditations expire 03/31/17. All other test results associated with a Charter Steel laboratory that appear on the front of this report, if any, were performed according to documented procedures developed by Charter Steel and are not accredited by A2LA. 6. The test results on the front of this report are the true values measured on the samples taken from the production lot. They do not apply to any other sample. 7. This test report cannot be reproduced or distributed except in full without the written permission of Charter Steel. The primary customer whose name and address appear on the front of this form may reproduce this test report subject to the following restrictions: It may be distributed only to their customers Both sides of all pages must be reproduced in full 8. This certification is given subject to the terms and conditions of sale provided in Charter Steel's acknowledgement (designated by our Sales Order number) to the customer's purchase order. Both order numbers appear on the front page of this Report. 9. Where the customer has provided a specification, the results on the front of this test report conform to that specification unless otherwise noted on this test report. Page 2 of 2

6

7

8

9

10