GS_-FLANGE SYS SAE 6000 PSI INFORMATION GENERAL. Type Approvals 17
|
|
- Eleanor Cummings
- 6 years ago
- Views:
Transcription
1 GENERAL SAE 6000 PSI GS-FLANGE Product Page HYDRAULIC PIPES BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN BAR SCHEDULE SERIE SAE 3000 PSI 1 Type Approvals 17 Retain Ring- and 37 Flare Flange System Flare Flange System 19 Pressure Classes 20 GS-Code Key, Flare Flange Fitting 21 GS-Code Key, Retain Ring Fitting 22 Material Possibilities, Flared Flange 23 Material Possibilities, Retain Ring Fitting 24 SCHEDULE SERIE SAE 6000 PSI GS_-FLANGE SYS SCHEDULE SERIE DIN BAR
2 GS-FLANGE 17 GS-FLANGE BITE TYPE FLARE ADAPTORS OTHER TECHNICAL MACHINES VALVES CLAMPS TUBES & PIPES The GS-Piping System consists of two flange systems - the flare flange and retain ring systems - which allow piping systems with working pressures from 10 to 690 bar and pipe diameters between 16 and 600 mm to be assembled without welding. The Retain Ring and 37 o Flare Flange systems are used for high pressure connections and the 90 o Flare Flange connection for low pressure applications. The GS Retain Ring, 37 o and 90 o Flare Flange systems are approved by numerous classification companies around the world including det Norske Veritas, Lloyd s register of shipping, Bureau Veritas, Registro Italiano Navale, Maritimo Register of Shipping, Germanischer Lloyds, American Bureau of Shipping, Nippon Kajii Kyokai, Technische Uberwachungs Verein etc. The retain ring and flare flange systems are also approved to be used off-shore by NOR- SOK (piping spec. s IS70, IS80, GS70 and JS80).
3 GS-FLANGE 18 GS-FLANGE TUBES & PIPES CLAMPS VALVES BITE TYPE FLARE Retain Ring System The GS Retain Ring system is used for piping with a maximum allowable working pressure up to bar. In special applications, the retain ring system can be used with working pressures as high as 690 bar. Extensive testing programs have shown the suitability of the retain ring jointing method for high pressure piping systems in a wide range of different materials ranging from mild and stainless steel to duplex and titanium and all other quality pipe materials with an elongation above 20%. SAE 3000 SAE 6000 ISO 6164 pressure, bar size, pipe 26x6 97x12 26x6 66x x x41.4 size, flange 1/2 3 1/ material, pipe mild steel, galvanised steel, duplex, super duplex, titanium, 4130 material, flange electric zinced carbon steel, hot dip galvanized and stainless steel material, seal Viton, NBR mat., retain ring stainless steel ADAPTORS OTHER MACHINES TECHNICAL 37 Flare Flange System The 37 o flare flange system is used for piping with a maximum allowable working pressure of 420 bar. The 37 o flare flange jointing method is suitable for high pressure piping systems in a wide range of different materials ranging from mild steel to tungum. SAE 50 SAE 3000 SAE 6000 ISO 6164 / DIN pressure, bar < size, pipe 50x3 273x6 16x2 90x5 16x2 60x5 50x5 72x7 size, flange 1 1/2 10 1/2 3 1/ /2 2 material, pipe material, flange material, seal mild steel, galvanised steel, copper-nickel, aluminium/brass duplex, super duplex, titanium, tungum (elongation above 20%) electric zinced carbon steel, hot dip galvanized carbon steel, stainless steel or titanium Viton, NBR
4 GS-FLANGE 19 GS-FLANGE 90 Flare Flange System The 90 o flare flange system is used for class III piping with a maximum allowable working pressure of 16 bar. The 90 o flare flange jointing method is suitable for low pressure piping systems in a wide range of different materials ranging from mild steel to super duplex. TUBES & PIPES CLAMPS BITE TYPE FLARE TECHNICAL MACHINES OTHER ADAPTORS VALVES SAE DIN/BS/ANSI/JIS/GOST pressure, bar size, pipe 16x x6 21.3x x8.8 (608x12.5) size, flange 1/2 8 1/2 16 (24 ) material, pipe material, flange material, seal mild steel, galvanised steel, copper-nickel, aluminium/brass duplex, super duplex, titanium, tungum electric zinced carbon steel, hot dip galvanized carbon steel, stainless steel or titanium based on media inside pipe (example Klinger SIL C-4430)
5 GS-FLANGE 20 GS-FLANGE TUBES & PIPES CLAMPS VALVES BITE TYPE FLARE ADAPTORS OTHER MACHINES TECHNICAL GS-Hydro s Flange Systems are divided into pressure classes. The pressure class is selected based on the working pressure of the piping system. Each pressure class contains then all the GS-components needed for the piping system with that specific working pressure. The Pressure Classes are: bar 90 o flare flanges, collars and sealings SAE 50 bar SAE-dimensioned low pressure piping components for 37 o flaring and retain ring connection SAE 3000 psi Components for metric pipes according to SAE-standard J518C code 61 SAE 6000 psi Components for metric pipes according to SAE-standard J518C code 62 DIN bar Components for metric pipes according to DIN-standard SAE 3000 psi - Schedule Series Components for schedule pipes according to SAE-standard J518C code 61 SAE 6000 psi Schedule Series Components for schdeule pipes according to SAE-standard J518C code 62 DIN bar Schedule Series Components for schedule pipes according to DIN-standard
6 GS-FLANGE GS-Code Key, Flare Flange Fitting 21 GS-FLANGE Part No 316/30X3FC* TUBES & PIPES Flange Code Face Type Pressure Size 1 SAE J bar 1 1/2 5 1/2 round 50 bar SAE J psi 1/2 3 CLAMPS GS-Size Code 6 SAE J psi 1/ /2 3/ /4 1 1/ / /2 3 3/ Pipe Size VALVES 30X3 Pipe O.D. x wall thickness (mm) Inser Cone Code Insert Cone Code Sealing Surface FA O-ring groove BITE TYPE FLARE ADAPTORS TECHNICAL MACHINES OTHER FB Flat face FC FD Bonded seal groove Streight coupling *) The Complete assembly as separate components: Part Code Component Code Amount 316F Flange 1 pc 16/30X3FC Insert Cone 1 pc 316/30X3FC 16/30F Sleeve 1 pc 1629 Bonded Seal 1 pc OR23X1.0 O-Ring 1 pc
7 GS-FLANGE 22 GS-FLANGE GS-Code Key, Retain Ring Fitting TUBES & PIPES CLAMPS VALVES BITE TYPE FLARE ADAPTORS OTHER MACHINES TECHNICAL Part No Flange Code Face Type Pressure Size 1 SAE J bar 1 1/2 5 1 round 50 bar SAE J psi 1/2 3 4 square 400 bar 2 3 1/2 6 SAE J psi 1/2 2 8 round 350 bar 3 3/4 12 GS-Size Code /2 3/ /4 1 1/ / / Inser Cone Code 001 Flange for welding 041 Hose assembly (straight/straight) 002 Flange for welding 042 Hose assembly (90 /90 ) 003 Flange for welding 043 Hose assembly (45 /45 ) 004 Flange for welding 045 Hose assembly (straight/90 ) 005 Flange for welding 046 Hose assembly (90 /45 ) 006 Flange for welding 047 Hose assembly (45 /straight) 007 Flange for welding 082 Flange for welding 008 Flange for welding 083 Flange for welding 009 Flange for welding 084 Flange for welding 010 Flange for welding 085 Flange for welding 011 Flange for welding 086 Flange for welding 013 Female thread flange (BSP) 099 Adaptor 014 Male thread flange (BSP) 113 Female thread flange (NPT) 015 Elbow flange 114 Male thread flange (NPT) 016 Tee flange 115 Elbow block 018 Flange bend 116 Tee block 019 Bulkhead flange 125 Blind flange 020 Hose insert, straight 129 Ball valve flange 021 Hose insert, Non-return valve 022 Hose insert, Tailstock 024 Vibra bulkhead flange 214 Male thread flange (UNF) 025 Flange plug 901 Compensator 035 Tee between (BSP 1/4 ) 902 Compensator 036 Tee between (BSP 1/2 ) 918 U-loop for low pressure 037 Tee between (BSP 3/4 ) 920 U-loop for high pressure *) The Complete assembly as separate components: Part Code Component Code Amount 432 Flange 2 pc Bulkhead 1 pc Retain Ring 2 pc 3219 Bonded Seal 2 pc *
8 GS-FLANGE Material Possibilities, Flared Flange 23 GS-FLANGE Flared fittings can be accomplished by several different material alternatives. The following table demonstrates 4 different complete assemblies, out of which the best combination can be chosen out depending on the application. TUBES & PIPES CLAMPS Standard assembly +yellow pass. flanges +hot dip galv. flanges 320F Flange St 52, yellow pass. 20/38X4FC Insert Cone St 52, yellow pass. 320/38X4FC 20/38F Sleeve St 52, yellow pass Bonded Seal St 52/NBR, yellow pass. OR30X1.0 O-ring NBR, 90 Shore 320FSS Flange AISI /38X4FCSS Insert Cone AISI /38X4FCSS 20/38FSS Sleeve AISI 316 OR30X1.0 O-ring NBR, 90 Shore 320F Flange St 52, yellow pass. 20/38X4FCSS Insert Cone AISI /38X4FCSS/ZN 20/38FSS Sleeve AISI 316 OR30X1.0 O-ring NBR, 90 Shore 320FK Flange St 52, hot dip galv. 20/38X4FCSS Insert Cone AISI /38X4FCSS/K 20/38FSS Sleeve AISI 316 OR30X1.0 O-ring NBR, 90 Shore *) In bonded seals there is also possibility to have VITON as rubber material. BITE TYPE FLARE ADAPTORS OTHER TECHNICAL MACHINES VALVES Yellow passivation according to EN Fe//Zn12//C. Hot dip galvanization according to EN ISO In smaller (drum) hot dip galvanized components the zinc thickness of layer is min. 45 micrometer. In bigger (hung) hot dip galvanized components the zinc thickness of layer is min. 70 micrometer.
9 GS-FLANGE 24 GS-FLANGE Material Possibilities, Retain Ring Fitting TUBES & PIPES CLAMPS VALVES BITE TYPE FLARE ADAPTORS OTHER Retain ring fittings can be accomplished by several different material alternatives. The following table demonstrates 4 different complete assemblies, out of which the best combination can be chosen out depending on the application. Standard assembly yellow pass. flanges +hot dip galv. flanges 320 Flange St 52, yellow pass Bulkhead St 52, yellow pass. 20 Retain ring AISI Bonded Seal St 52/NBR, yellow pass SS 320SS Flange AISI SS Bulkhead AISI Retain ring AISI SS/ZN 320 Flange St 52, yellow pass SS Bulkhead AISI Retain ring AISI SS/K Yellow passivation according to EN Fe//Zn12//C. Hot dip galvanization according to EN ISO K Flange St 52, hot dip galv SS Bulkhead AISI Retain ring AISI 304 *) In bonded seals there is also possibility to have VITON as rubber material. In smaller (drum) hot dip galvanized components the zinc thickness of layer is min. 45 micrometer. In bigger (hung) hot dip galvanized components the zinc thickness of layer is min. 70 micrometer. MACHINES TECHNICAL
WELCOME TO TRUS GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY
WELCOME TO GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY 1. Index 1. Index 2. Introduction 3. Pipe Supply 4. Fitting Supply 5. Flange Supply 6. Hammer Wing Union Supply 7. Bolt / Nut Supply 8. Gasket
More informationINIZIATIVE INDUSTRIALI
INIZIATIVE INDUSTRIALI S.p.A. Sarplast is a company located in Santa Luce (Pisa, Italy) which has over 35 years experience in the design, manufacturing and supply of Glass-Fiber Reinforced Plastic (GRP)
More informationEPIC B2134 J345 X721 1/2015
EPIC B2134 J345 X721 1/15 Ekoplastik System made from granulate of leading European producers unique 3 layer pipe reinforced with basalt fiber new materials of 4. generation PP-RCT high pressure and temperature
More informationHOSES, FITTINGS & BALL VALVES DIRECTORY
HOSES, FITTINGS & BALL VALVES DIRECTORY a constant flow of solutions ISO 9001 ISO 14001 OHSAS 18001 Stucchi FCP Pty Ltd is a 100% owned subsidiary of the Stucchi SpA group based in northern Italy, one
More informationVALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
More informationShackles. Applications. Range. Design. CAD drawings. Finish
Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications.
More informationCustom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
More informationTUFFALOY. Resistance Welding Products. Leader in the Industry Since Catalog 2014
Catalog 2014 Resistance Welding Products Leader in the Industry Since 1937 Resistance Welding Equipment & Supplies Service Sales Consulting Seminars table of contents RESISTANCE WELDING PRODUCTS The little
More informationTools for Pipe Welding
E L D Tools for Pipe elding ELD-TECH ApS E L D PF Clamp LIFETIME ARRANTY ON BROKEN PARTS Stainless Steel The unique design of the PF Clamp gives an extremely strong clamp for fit-up of all types of pipes
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationJohnson. We now offer a real step forward in reliability with our newly designed riser pipes.
RISER PIPES Johnson enjoys today an enviable reputation with drilling and water industry professionals as the exclusive designer and manufacturer of wire-wrapped screens. In addition to our skills and
More informationIsolation Gaskets 101
Isolation Gaskets 101 Discussion Outline Isolation Gasket Basics Product Offering Gasket Terms & Definitions Materials & Applications Standards & Codes Isolation Gasket Basics ISOLATION GASKET Isolation
More informationPRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings.
Stainless, DUPLEX, Super Duplex flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists
More informationDiaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
More informationFlange Insulation Sets
Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as a galvanic cell and reduce the risk of galvanic
More information07 SWIVEL JOINTS 268
07 7.01 The Range STRAIGHT SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 270 90 SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 271 FLANGED SWIVEL JOINT Size : 1/2 to Working Pressure
More information1 Are you spending too much to transport air? The total expense of distributing air from your compressors to its point of use involves more than just the cost of piping. It also includes labor-intensive
More informationMeter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
More informationClass III Pipes Fittings (Dy 500 mm)
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-P003 Class
More informationTHERMOWELL BASIC TRAINING
THERMOWELL BASIC TRAINING 1 PURPOSE OF TRAINING WHY CONSTRUCTION TESTING INSTALLATION HOW INSTALATION CONSEQUENCES OVERVIEW OF POSSIBLE MODELS Why to use thermowells? Protection of the temperature sensor
More informationCopper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More information+91-8048078804 Prayas Steel & Alloys http://www.stainlesssteelscraps.com/ We are importers, stockiest & suppliers of ferrous, non ferrous metal and scrap. Our range of ferrous & non ferrous metal products
More informationProducts performance. PEX/ AL/PEX pipes. y introduction 1. s performance 2 /AL/PEX pipes 2 B pipes 4. Is & Accessories 11 ion Guide 13.
Products performance PEX/ AL/PEX pipes PE(X)/AL/PE(X) MULTILAYER pipe consists of a continuous buttwelded aluminium core with an inner and outer layer made of HOPE (polyethylene) that has been crosslinked
More informationGeneral Information. Installation Information Design Information Material Information Ordering Information
General Information General Information Drop-In Anchor ProDUCT DESCRIPTION The is a drop-in anchor which shows good performance for competitive price for typical mass applications. It can be used in a
More informationAccessories - Universal Safety Heads
Accessories - Universal Safety Heads Pressures to 110,000 psi (7584 bar) Safety Heads/Rupture Discs - Safety Heads and Rupture Discs offer an economical and dependable relief port to guard against system
More informationChrome Moly flanges and fittings
Chrome Moly flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists of a complete range
More informationMarcegaglia do Brasil
Garuva plant Marcegaglia do Brasil 7 millions wire on tube condensers 240 millions meters of welded tubes for refrigeration 180.000 tons of electro-welded carbon tubes Brasília 20.000 tons of stainless
More informationCatalog 2017 TUFFALOY. Resistance Welding Products. Leader in the Industry Since Special & Custom Parts available, contact us for quotation X
Catalog 2017 TUFFALOY Resistance Welding Products Leader in the Industry Since 1937 Special & Custom Parts available, contact us for quotation X quote request specials and customs Contact Name: Company:
More informationPVC-C metric Fittings
Fittings 23 00 01 Ben 90, PVC-C Raius = 2 Raius = 2 PN Coe SP kg z 20 16 723 000 106 10 0.030 40 27 58 25 16 723 000 107 10 0.055 50 35 71 32 16 723 000 108 10 0.075 64 38 88 40 16 723 000 109-0.276 80
More informationISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationTHE PREFERRED SOURCE FOR STAINLESS STEEL TUBULAR PRODUCTS
THE PREFERRED SOURCE FOR STAINLESS STEEL TUBULAR PRODUCTS SEATTLE HOUSTON BATON ROUGE ATLANTA Toll Free: 800.426.4258 Fax: 206.878.2475 sales@pacstainless.com Toll Free: 800.535.0386 Fax: 713.466.6334
More informationRegulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationC. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationOSNALINE. Tubes and tube bundles. Member of the KME Group. KME Germany AG & Co. KG [GB] OSNALINE
OSNALINE Tubes and tube bundles KME Germany AG & Co. KG OSNALINE [GB] Member of the KME Group KME Germany AG & Co. KG Experts in tube bundles KME Germany AG & Co. KG is a member of the KME Group S.p.A.
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationFOR INDUSTRIAL & COMMERCIAL HEATING APPLICATIONS
LARGE DIAMETER COPPER TUBES FOR INDUSTRIAL & COMMERCIAL HEATING APPLICATIONS 1 Introduction 2 2 Copper Tubes 2 3 Hangers and Expansion 4 4 Pressure Losses and Flow Rate 4 5 Water Flow Resistance Through
More informationThe Master of Master Distribution
The Master of Master Distribution Stainless and Special Metals Pipe and Tubing Pipe Fittings Pipe Flanges Valves Supplying stainless products to industrial distributors since 1963 MASTER OF MASTER DISTRIBUTION
More informationGENERAL.
GENERAL CATALOGUE Founded in 1981, Emiflex SpA operates in its two plants located in Varedo (Milan) and Siniscola (Nuoro). The Emiflex SpA facilities, covering an area of over 30,000 m², house specific
More informationDIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
More informationTubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
Tubing Data 1 www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing...
More informationSteel Pipe and Tube. Section 13
Steel Pipe and Tube Section 13 13-1 INFORMATION - STEEL PIPE AND TUBE GENERAL INFORMATION Rigid hydraulic tubing offers intrinsic bene ts when installing uid transfer lines in both xed and mobile plant
More informationALL METALS & FORGE GROUP
ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.
More informationAlloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254
The typical Austentic Stainless Steel 18%Cr + 10% Ni have been adopted in corrosion resistant application for decades. In accordance with more and more application, the typical Austentic stainless steel
More informationSTOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
More informationCONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products
BURTON DELINGPOLE FLANGES AND FITTINGS CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products Contoured Bodied Flange Branch Fittings Buttweld Branch
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationSECTION 18. AMERICAN General Index
SECTION 18 AMERICAN General Index General Index A Abbreviations Organizations...1-1 Standard, American...17-23 Abrasion Resistant Pipe...12-12 Accessories (See Joint Materials) American Flow Control Valves
More informationB B B B3104 CT B3104CT CT B3104CT B3100C AS B422 Right Angle Clamp
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 14 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
More informationTHE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES The manufacturer guarantees only English text. Available on our web site:
More informationLevel Sensors 1001 Table of contents
Table of contents Index Table of contents 4 Description and function 5 Certificates / Approvals 6-7 Level Sensors 1001 Stainless steel DN10 to DN500 8 Brass DN10 to DN80 9 Titanium DN10 to DN500 10 Alloy
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationProduct catalogue. Hot-rolled small diameter seamless steel tubes
Product catalogue Hot-rolled small diameter seamless steel tubes Product catalogue Our competitive edge: comprehensive offer Alchemia Capital Group has the most wide-ranging offer of seamless steel pipes
More informationGyrolok. Gyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Tubing Data Charts Design HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application
More informationPIPE OUTSIDE DIAMETER GUIDE
August 17, 2017-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informationVERIS Accelabar. Superior Flow Measurement Accuracy
VERIS Superior Flow Measurement Accuracy Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. ...A New Idea in Flow
More informationCONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA CONDUIT AND FITTINGS FOR HYGIENIC DESIGN
CONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA CONDUIT AND FITTINGS FOR HYGIENIC DESIGN CONTENT PAGE Conduit selection table Anaconda Sealtite Food Grade Sealtite Material Material Temp. ( C)
More informationB R OA DWAY RAC K. High Security
B R OA DWAY RAC K High Security The Broadway Rack is a great fit on Broadway or in areas where maximum security is a top priority. Made of thick, two-inch square steel, the Broadway Rack renders pipe-cutters
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationDIVISION: METALS SECTION: METAL FASTENINGS REPORT HOLDER: LINDAPTER
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3330 Reissued 03/2017 This report is subject to renewal 03/2018. DIVISION: 05 00 00 METALS SECTION:
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationROLLING RACK. Simple Security
Simple Security The graceful design and high security of the Rolling Rack has made this type of bike rack a standard for many schools and communities. The Rolling Rack can be used as a single-sided or
More informationPitting & Crevice Corrosion. Grinding debris from work carried above a tube run that has initiated Pitting Corrosion on Duplex material..
Pitting Corrosion Pitting & Crevice Corrosion Grinding debris from work carried above a tube run that has initiated Pitting Corrosion on Duplex material.. Pitting & Crevice Corrosion Note the Crevice Corrosion
More informationNEOTISS TM HPT finned TubES
NEOTISS TM HPT finned tubes p.2 / NEOTISS NEOTISS / p.3 Nomenclature Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8 Type 9* Material 30 FPI.032 inch.813 mm 28 FPI inch mm 26 FPI inch mm 36 FPI.026
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationIndustrial Electrolytic Conductivity Cells for UDA2182 Series and APT Series
Industrial Electrolytic Conductivity Cells for UDA2182 Series and APT Series 70-82-03-14 June 08 Page 1 of 8 Specification Main Overview The specification of an Electrolytic Conductivity Cell requires
More informationPREINSULATED PIPE SYSTEMS FOR HOT WATER NETWORKS
Saules iela 8, Ozolnieki, Ozolnieku pagasts, Ozolnieku novads, LV 3018 Tālr.: +371 6 30 50600, fakss: +371 6 30 50230 PREINSULATED PIPE SYSTEMS FOR HOT WATER NETWORKS Catalogue AI 9.05 2014 CONTENT Introduction
More informationDouble Containment DESIGN & INSTALLATION GUIDE TECHNICAL INFORMATION. Visit our web site
Double DESIGN & INSTALLATION GUIDE TECHNICAL INFORMATION Visit our web site www.spearsmfg.com 1326 The information contained in this publication is based on current information and Product design at the
More informationHAM BAKER. Disc Diffusers. Overview GROUP
Disc Diffusers Overview In partnership with SCM Tecnologie, Ham Baker Adams can provide aeration systems for basins at civil and industrial wastewater treatment plants. These systems are intended for the
More informationSpecialist in forgings and machining
Specialist in forgings and machining MAINTENANCE AND PROCESS INDUSTRY MECHANICAL ENGINEERING EXTRACTIVE INDUSTRY AND REFINERIES OFFSHORE AND MARITIME Memar Strength, quality and reliability Maintenance
More informationBAY POLES FOR LOAD BEARING WINDOWS
BAY POLES FOR LOAD BEARING WINDOWS From Nicholls & Cooke The Pole Calculations Ordering Head and Base Plates New Build Box Support Anti Bounce Bars Universal Poles Slack Adjuster Kits Deceurninck Series
More informationFLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
More informationModel EVMS Vertical Multistage Pumps for the Global Market
New Products & New Techniques Model EVMS Vertical Multistage Pumps for the Global Market Hiroyuki KAWASAKI*, and So KUROIWA* Abstract As key products for the global market, new model EVMS stainless vertical
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationConnect with Quality. Flange Insulation Sets
Connect with Quality Flange Insulation Sets Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as
More informationHygienic tube & process components
Hygienic tube & process components EN 10357-D (INCHES, SMS, BS) EN 10357 serie D The norm EN-10357-D consists 3 different size ranges from earlier norms and standards. They all are according the inches,
More informationTECHNICAL RANGE. The Complete Pipe Fitting s Handbook
TECHNICAL RANGE The Complete Pipe Fitting s Handbook CONTENTS Compression Fittings Introduction Copper Tubing for Economy Making a Compression Joint Compression Fittings Gate Valves Stop Taps Capillary
More informationACO Marine. ACO Scuppers - ACO Channels ACO Drainage Systems for Shipbuilding and Offshore Installations
ACO Marine ACO Scuppers - ACO Channels ACO Drainage Systems for Shipbuilding and Offshore Installations Basic characteristic Through a consistent and effective product development, ACO Marine has developed
More informationProcess Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationSeals with boundless possibilities!
European Seals Seals with boundless possibilities! Seals with boundless possibilities! ERIKS bv, the Netherlands ERIKS European Seals From Alkmaar, the Netherlands, ERIKS bv supplies technical components
More informationPRODUCT: WELDED PIPE SPECIFICATION: 355.6*9.52 MATERIAL: S32205 PRODUCT: SEAMLESS PIPE. SPECIFICATION: Φ33mm*1mm MATERIAL: S31803
Special Piping Materials is renowned for the high volume of Duplex and Super Duplex products that it stocks. It supplies these materials to countless companies around the world who use its product s in
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationGOULDS PUMPS. Commercial Water. e-sv General Market Specifications. Applications. Specifications
e-sv General Market Specifications Municipal, Agricultural, Light Industry, Water Treatment, Heating and Air Conditioning Applications Handling of water, free of suspended solids, in the municipal, industrial
More informationFLEXIBLE HOSES FOR FLUIDS AND GASES: ANACONDA CORRUGATED HOSES TYPE BW656, BW756, BW856, BW956, BW673 & ANAFLEX
FLEXIBLE HOSES FOR FLUIDS AND GASES: ANACONDA CORRUGATED HOSES TYPE BW656, BW756, BW856, BW956, BW673 & ANAFLEX HOSE SELECTION TABLE Hose Material Material Size (mm) Temp. ( C) Type Hose Braid Min. Max.
More informationHOLE SAMPLING & MONITORING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
HOLE SAMPLING & MONITORING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com HOLE SAMPLING & MONITORING TABLE OF CONTENTS HOLE SAMPLING & MONITORING OVERVIEW...2 SPLIT
More informationSingle building entries Power and communication. Always. Reliable. Tight. cablepipebuildingentry+ Advantages:
Always. Reliable. Tight. Advantages: gastight and watertight up to bar quick to assemble in just a few minutes no need to restore the seal as per the requirements in DIN 895 Part 4 Single building entries
More informationmarcegaglia RU Vladimir
marcegaglia RU Vladimir Marcegaglia RU 70 000 sqm total area 14 000 sqm first phase covered area Vladimir St. Petersburg Moscow 42 000 sqm for development (covered) 25 000 t/y tube manufacturing capacity
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
More informationOur philosophy at your service
CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox
More informationEVALUATION SUBJECT: SPEEDFIT TUBING AND FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING
ICC-ES Report PMG-1033 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: SPEEDFIT TUBING AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING DIVISION:
More informationCOMBINATION AIR VALVE
MINING DIVISION COMBINATION AIR VALVE FOR HIGH FLOW D-6NS SERIES DESCRIPTION The D-6NS Series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air release
More informationEVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING
ICC-ES Report PMG-1244 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationPlastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases
Plastic tube flowmeters Series PT/PS Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or
More informationHigh Pressure Filter Assemblies
High Pressure Filter Assemblies Up to 20,000 PSI (1378 bar) All stainless steel construction Stainless steel metal felt filter elements High Pressure T-Type Filter Assemblies Greater service life than
More information